* [PATCH v2] iio: imu: mpu6050: add missing available scan masks
@ 2019-06-27 13:19 Jean-Baptiste Maneyrol
2019-07-14 17:20 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Baptiste Maneyrol @ 2019-06-27 13:19 UTC (permalink / raw)
To: linux-iio; +Cc: stable, Jean-Baptiste Maneyrol
Driver only supports 3-axis gyro and/or 3-axis accel.
For icm20602, temp data is mandatory for all configurations.
Fix all single and double axis configurations (almost never used) and more
importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
temp data is not enabled.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
---
Changes in v2:
- Use more explicit scan defines for masks
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 385f14a4d5a7..66629c3adc21 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -851,6 +851,25 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
};
+static const unsigned long inv_mpu_scan_masks[] = {
+ /* 3-axis accel */
+ BIT(INV_MPU6050_SCAN_ACCL_X)
+ | BIT(INV_MPU6050_SCAN_ACCL_Y)
+ | BIT(INV_MPU6050_SCAN_ACCL_Z),
+ /* 3-axis gyro */
+ BIT(INV_MPU6050_SCAN_GYRO_X)
+ | BIT(INV_MPU6050_SCAN_GYRO_Y)
+ | BIT(INV_MPU6050_SCAN_GYRO_Z),
+ /* 6-axis accel + gyro */
+ BIT(INV_MPU6050_SCAN_ACCL_X)
+ | BIT(INV_MPU6050_SCAN_ACCL_Y)
+ | BIT(INV_MPU6050_SCAN_ACCL_Z)
+ | BIT(INV_MPU6050_SCAN_GYRO_X)
+ | BIT(INV_MPU6050_SCAN_GYRO_Y)
+ | BIT(INV_MPU6050_SCAN_GYRO_Z),
+ 0,
+};
+
static const struct iio_chan_spec inv_icm20602_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
{
@@ -877,6 +896,28 @@ static const struct iio_chan_spec inv_icm20602_channels[] = {
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
};
+static const unsigned long inv_icm20602_scan_masks[] = {
+ /* 3-axis accel + temp (mandatory) */
+ BIT(INV_ICM20602_SCAN_ACCL_X)
+ | BIT(INV_ICM20602_SCAN_ACCL_Y)
+ | BIT(INV_ICM20602_SCAN_ACCL_Z)
+ | BIT(INV_ICM20602_SCAN_TEMP),
+ /* 3-axis gyro + temp (mandatory) */
+ BIT(INV_ICM20602_SCAN_GYRO_X)
+ | BIT(INV_ICM20602_SCAN_GYRO_Y)
+ | BIT(INV_ICM20602_SCAN_GYRO_Z)
+ | BIT(INV_ICM20602_SCAN_TEMP),
+ /* 6-axis accel + gyro + temp (mandatory) */
+ BIT(INV_ICM20602_SCAN_ACCL_X)
+ | BIT(INV_ICM20602_SCAN_ACCL_Y)
+ | BIT(INV_ICM20602_SCAN_ACCL_Z)
+ | BIT(INV_ICM20602_SCAN_GYRO_X)
+ | BIT(INV_ICM20602_SCAN_GYRO_Y)
+ | BIT(INV_ICM20602_SCAN_GYRO_Z)
+ | BIT(INV_ICM20602_SCAN_TEMP),
+ 0,
+};
+
/*
* The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
* INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
@@ -1136,9 +1177,11 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
if (chip_type == INV_ICM20602) {
indio_dev->channels = inv_icm20602_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
+ indio_dev->available_scan_masks = inv_icm20602_scan_masks;
} else {
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+ indio_dev->available_scan_masks = inv_mpu_scan_masks;
}
indio_dev->info = &mpu_info;
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
2019-06-27 13:19 [PATCH v2] iio: imu: mpu6050: add missing available scan masks Jean-Baptiste Maneyrol
@ 2019-07-14 17:20 ` Jonathan Cameron
2019-07-17 13:45 ` Jean-Baptiste Maneyrol
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2019-07-14 17:20 UTC (permalink / raw)
To: Jean-Baptiste Maneyrol; +Cc: linux-iio, stable
On Thu, 27 Jun 2019 13:19:53 +0000
Jean-Baptiste Maneyrol <JManeyrol@invensense.com> wrote:
> Driver only supports 3-axis gyro and/or 3-axis accel.
> For icm20602, temp data is mandatory for all configurations.
>
> Fix all single and double axis configurations (almost never used) and more
> importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
> temp data is not enabled.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
Something odd happened in this email that meant my client saved it as garbage.
Oh well, cut and pasted worked ;)
Applied to the fixes-togreg branch of iio.git and marked for stable.
Thanks,
Jonathan
> ---
> Changes in v2:
> - Use more explicit scan defines for masks
>
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 385f14a4d5a7..66629c3adc21 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -851,6 +851,25 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
> INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
> };
>
> +static const unsigned long inv_mpu_scan_masks[] = {
> + /* 3-axis accel */
> + BIT(INV_MPU6050_SCAN_ACCL_X)
> + | BIT(INV_MPU6050_SCAN_ACCL_Y)
> + | BIT(INV_MPU6050_SCAN_ACCL_Z),
> + /* 3-axis gyro */
> + BIT(INV_MPU6050_SCAN_GYRO_X)
> + | BIT(INV_MPU6050_SCAN_GYRO_Y)
> + | BIT(INV_MPU6050_SCAN_GYRO_Z),
> + /* 6-axis accel + gyro */
> + BIT(INV_MPU6050_SCAN_ACCL_X)
> + | BIT(INV_MPU6050_SCAN_ACCL_Y)
> + | BIT(INV_MPU6050_SCAN_ACCL_Z)
> + | BIT(INV_MPU6050_SCAN_GYRO_X)
> + | BIT(INV_MPU6050_SCAN_GYRO_Y)
> + | BIT(INV_MPU6050_SCAN_GYRO_Z),
> + 0,
> +};
> +
> static const struct iio_chan_spec inv_icm20602_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
> {
> @@ -877,6 +896,28 @@ static const struct iio_chan_spec inv_icm20602_channels[] = {
> INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
> };
>
> +static const unsigned long inv_icm20602_scan_masks[] = {
> + /* 3-axis accel + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_ACCL_X)
> + | BIT(INV_ICM20602_SCAN_ACCL_Y)
> + | BIT(INV_ICM20602_SCAN_ACCL_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + /* 3-axis gyro + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_GYRO_X)
> + | BIT(INV_ICM20602_SCAN_GYRO_Y)
> + | BIT(INV_ICM20602_SCAN_GYRO_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + /* 6-axis accel + gyro + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_ACCL_X)
> + | BIT(INV_ICM20602_SCAN_ACCL_Y)
> + | BIT(INV_ICM20602_SCAN_ACCL_Z)
> + | BIT(INV_ICM20602_SCAN_GYRO_X)
> + | BIT(INV_ICM20602_SCAN_GYRO_Y)
> + | BIT(INV_ICM20602_SCAN_GYRO_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + 0,
> +};
> +
> /*
> * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
> * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
> @@ -1136,9 +1177,11 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
> if (chip_type == INV_ICM20602) {
> indio_dev->channels = inv_icm20602_channels;
> indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
> + indio_dev->available_scan_masks = inv_icm20602_scan_masks;
> } else {
> indio_dev->channels = inv_mpu_channels;
> indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
> + indio_dev->available_scan_masks = inv_mpu_scan_masks;
> }
>
> indio_dev->info = &mpu_info;
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
2019-07-14 17:20 ` Jonathan Cameron
@ 2019-07-17 13:45 ` Jean-Baptiste Maneyrol
2019-07-27 21:31 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Jean-Baptiste Maneyrol @ 2019-07-17 13:45 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
Hello Jonathan,
I am still not seeing this patch in the fixes-togreg branch or in the testing branch. Neither in the testing-fixes branch.
Is this expected?
Thanks for your response.
JB
From: linux-iio-owner@vger.kernel.org <linux-iio-owner@vger.kernel.org> on behalf of Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
Sent: Sunday, July 14, 2019 19:20
To: Jean-Baptiste Maneyrol
Cc: linux-iio@vger.kernel.org; stable@vger.kernel.org
Subject: Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe.
On Thu, 27 Jun 2019 13:19:53 +0000
Jean-Baptiste Maneyrol <JManeyrol@invensense.com> wrote:
> Driver only supports 3-axis gyro and/or 3-axis accel.
> For icm20602, temp data is mandatory for all configurations.
>
> Fix all single and double axis configurations (almost never used) and more
> importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
> temp data is not enabled.
>
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
Something odd happened in this email that meant my client saved it as garbage.
Oh well, cut and pasted worked ;)
Applied to the fixes-togreg branch of iio.git and marked for stable.
Thanks,
Jonathan
> ---
> Changes in v2:
> - Use more explicit scan defines for masks
>
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 385f14a4d5a7..66629c3adc21 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -851,6 +851,25 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
> INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
> };
>
> +static const unsigned long inv_mpu_scan_masks[] = {
> + /* 3-axis accel */
> + BIT(INV_MPU6050_SCAN_ACCL_X)
> + | BIT(INV_MPU6050_SCAN_ACCL_Y)
> + | BIT(INV_MPU6050_SCAN_ACCL_Z),
> + /* 3-axis gyro */
> + BIT(INV_MPU6050_SCAN_GYRO_X)
> + | BIT(INV_MPU6050_SCAN_GYRO_Y)
> + | BIT(INV_MPU6050_SCAN_GYRO_Z),
> + /* 6-axis accel + gyro */
> + BIT(INV_MPU6050_SCAN_ACCL_X)
> + | BIT(INV_MPU6050_SCAN_ACCL_Y)
> + | BIT(INV_MPU6050_SCAN_ACCL_Z)
> + | BIT(INV_MPU6050_SCAN_GYRO_X)
> + | BIT(INV_MPU6050_SCAN_GYRO_Y)
> + | BIT(INV_MPU6050_SCAN_GYRO_Z),
> + 0,
> +};
> +
> static const struct iio_chan_spec inv_icm20602_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
> {
> @@ -877,6 +896,28 @@ static const struct iio_chan_spec inv_icm20602_channels[] = {
> INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
> };
>
> +static const unsigned long inv_icm20602_scan_masks[] = {
> + /* 3-axis accel + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_ACCL_X)
> + | BIT(INV_ICM20602_SCAN_ACCL_Y)
> + | BIT(INV_ICM20602_SCAN_ACCL_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + /* 3-axis gyro + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_GYRO_X)
> + | BIT(INV_ICM20602_SCAN_GYRO_Y)
> + | BIT(INV_ICM20602_SCAN_GYRO_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + /* 6-axis accel + gyro + temp (mandatory) */
> + BIT(INV_ICM20602_SCAN_ACCL_X)
> + | BIT(INV_ICM20602_SCAN_ACCL_Y)
> + | BIT(INV_ICM20602_SCAN_ACCL_Z)
> + | BIT(INV_ICM20602_SCAN_GYRO_X)
> + | BIT(INV_ICM20602_SCAN_GYRO_Y)
> + | BIT(INV_ICM20602_SCAN_GYRO_Z)
> + | BIT(INV_ICM20602_SCAN_TEMP),
> + 0,
> +};
> +
> /*
> * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
> * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
> @@ -1136,9 +1177,11 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
> if (chip_type == INV_ICM20602) {
> indio_dev->channels = inv_icm20602_channels;
> indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
> + indio_dev->available_scan_masks = inv_icm20602_scan_masks;
> } else {
> indio_dev->channels = inv_mpu_channels;
> indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
> + indio_dev->available_scan_masks = inv_mpu_scan_masks;
> }
>
> indio_dev->info = &mpu_info;
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
2019-07-17 13:45 ` Jean-Baptiste Maneyrol
@ 2019-07-27 21:31 ` Jonathan Cameron
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2019-07-27 21:31 UTC (permalink / raw)
To: Jean-Baptiste Maneyrol; +Cc: linux-iio
On Wed, 17 Jul 2019 13:45:07 +0000
Jean-Baptiste Maneyrol <JManeyrol@invensense.com> wrote:
> Hello Jonathan,
>
> I am still not seeing this patch in the fixes-togreg branch or in the testing branch. Neither in the testing-fixes branch.
>
> Is this expected?
I've been in a bit of a mess due to travel etc, so
more than possible I hadn't pushed it out as I should have
done.
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/commit/?h=fixes-togreg&id=1244a720572fd1680ac8d6b8a4235f2e8557b810
I didn't see this before I'd pushed out for Arnd's patch hence
not sure if it was there before or not!
Sorry about that,
Jonathan
>
> Thanks for your response.
> JB
>
> From: linux-iio-owner@vger.kernel.org <linux-iio-owner@vger.kernel.org> on behalf of Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
>
> Sent: Sunday, July 14, 2019 19:20
>
> To: Jean-Baptiste Maneyrol
>
> Cc: linux-iio@vger.kernel.org; stable@vger.kernel.org
>
> Subject: Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
>
>
>
>
> CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe.
>
>
>
> On Thu, 27 Jun 2019 13:19:53 +0000
>
> Jean-Baptiste Maneyrol <JManeyrol@invensense.com> wrote:
>
>
>
> > Driver only supports 3-axis gyro and/or 3-axis accel.
>
> > For icm20602, temp data is mandatory for all configurations.
>
> >
>
> > Fix all single and double axis configurations (almost never used) and more
>
> > importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
>
> > temp data is not enabled.
>
> >
>
> > Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
>
> > Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
>
> Something odd happened in this email that meant my client saved it as garbage.
>
> Oh well, cut and pasted worked ;)
>
>
>
> Applied to the fixes-togreg branch of iio.git and marked for stable.
>
>
>
> Thanks,
>
>
>
> Jonathan
>
>
>
> > ---
>
> > Changes in v2:
>
> > - Use more explicit scan defines for masks
>
> >
>
> > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 43 ++++++++++++++++++++++
>
> > 1 file changed, 43 insertions(+)
>
> >
>
> > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>
> > index 385f14a4d5a7..66629c3adc21 100644
>
> > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>
> > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>
> > @@ -851,6 +851,25 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
>
> > INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
>
> > };
>
> >
>
> > +static const unsigned long inv_mpu_scan_masks[] = {
>
> > + /* 3-axis accel */
>
> > + BIT(INV_MPU6050_SCAN_ACCL_X)
>
> > + | BIT(INV_MPU6050_SCAN_ACCL_Y)
>
> > + | BIT(INV_MPU6050_SCAN_ACCL_Z),
>
> > + /* 3-axis gyro */
>
> > + BIT(INV_MPU6050_SCAN_GYRO_X)
>
> > + | BIT(INV_MPU6050_SCAN_GYRO_Y)
>
> > + | BIT(INV_MPU6050_SCAN_GYRO_Z),
>
> > + /* 6-axis accel + gyro */
>
> > + BIT(INV_MPU6050_SCAN_ACCL_X)
>
> > + | BIT(INV_MPU6050_SCAN_ACCL_Y)
>
> > + | BIT(INV_MPU6050_SCAN_ACCL_Z)
>
> > + | BIT(INV_MPU6050_SCAN_GYRO_X)
>
> > + | BIT(INV_MPU6050_SCAN_GYRO_Y)
>
> > + | BIT(INV_MPU6050_SCAN_GYRO_Z),
>
> > + 0,
>
> > +};
>
> > +
>
> > static const struct iio_chan_spec inv_icm20602_channels[] = {
>
> > IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
>
> > {
>
> > @@ -877,6 +896,28 @@ static const struct iio_chan_spec inv_icm20602_channels[] = {
>
> > INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
>
> > };
>
> >
>
> > +static const unsigned long inv_icm20602_scan_masks[] = {
>
> > + /* 3-axis accel + temp (mandatory) */
>
> > + BIT(INV_ICM20602_SCAN_ACCL_X)
>
> > + | BIT(INV_ICM20602_SCAN_ACCL_Y)
>
> > + | BIT(INV_ICM20602_SCAN_ACCL_Z)
>
> > + | BIT(INV_ICM20602_SCAN_TEMP),
>
> > + /* 3-axis gyro + temp (mandatory) */
>
> > + BIT(INV_ICM20602_SCAN_GYRO_X)
>
> > + | BIT(INV_ICM20602_SCAN_GYRO_Y)
>
> > + | BIT(INV_ICM20602_SCAN_GYRO_Z)
>
> > + | BIT(INV_ICM20602_SCAN_TEMP),
>
> > + /* 6-axis accel + gyro + temp (mandatory) */
>
> > + BIT(INV_ICM20602_SCAN_ACCL_X)
>
> > + | BIT(INV_ICM20602_SCAN_ACCL_Y)
>
> > + | BIT(INV_ICM20602_SCAN_ACCL_Z)
>
> > + | BIT(INV_ICM20602_SCAN_GYRO_X)
>
> > + | BIT(INV_ICM20602_SCAN_GYRO_Y)
>
> > + | BIT(INV_ICM20602_SCAN_GYRO_Z)
>
> > + | BIT(INV_ICM20602_SCAN_TEMP),
>
> > + 0,
>
> > +};
>
> > +
>
> > /*
>
> > * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
>
> > * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
>
> > @@ -1136,9 +1177,11 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
>
> > if (chip_type == INV_ICM20602) {
>
> > indio_dev->channels = inv_icm20602_channels;
>
> > indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
>
> > + indio_dev->available_scan_masks = inv_icm20602_scan_masks;
>
> > } else {
>
> > indio_dev->channels = inv_mpu_channels;
>
> > indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
>
> > + indio_dev->available_scan_masks = inv_mpu_scan_masks;
>
> > }
>
> >
>
> > indio_dev->info = &mpu_info;
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-27 21:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 13:19 [PATCH v2] iio: imu: mpu6050: add missing available scan masks Jean-Baptiste Maneyrol
2019-07-14 17:20 ` Jonathan Cameron
2019-07-17 13:45 ` Jean-Baptiste Maneyrol
2019-07-27 21:31 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).