From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL v2] First set of iio new device support etc for the 5.5 cycle
Date: Sat, 12 Oct 2019 12:19:46 +0100 [thread overview]
Message-ID: <20191012121946.051b646f@archlinux> (raw)
The following changes since commit b73b93a2af3392b9b7b8ba7e818ee767499f9655:
iio: adc: ad7192: Add sysfs ABI documentation (2019-09-08 10:34:49 +0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.5a-take2
for you to fetch changes up to 4e716deff4c0b5bdb1bb7c41bdfe0fac2cf64c27:
iio: imu: adis16400: fix compiler warnings (2019-10-12 12:11:37 +0100)
----------------------------------------------------------------
First set of IIO new device support, cleanups and features for the 5.5 cycle
Second version of pull has an additional patch to fix some build
warnings from the adis16400.
The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.
Also a few trivial counter subsystem tidy ups on behalf of William.
Core new feature
* Device label support. A long requested feature no one got around to
implementing before. Allows DT based provision of a 'label' that
identifies a device uniquely within a system. This differs from existing
'name' which is meant to be the part number.
New device support
* ingenic-adc
- Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
- Add support for magnetometer in MPU925x parts.
Fiddly to do as this is actually a separate device sitting inside the
package, but with the master device being able to schedule reads etc.
Will only run if the auxiliary bus is not in use for any other devices.
Features
* ad7192
- Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
- Enable latched interrupts by default for sensors events with related clear.
- Motion events and related wakeup source. This needed quite a bit of
refactoring as well.
Cleanups and minor features
* ad7192
- sysfs ABI docs
* ad7949
- Remove code to readback configuration word as driver never actually enabled
it.
- Fix incorrect xfer length. Not actually known to cause problems other
than wasted bus usage.
* adis library and drivers
- Locking rework to simplify locking in general and avoid using the
core mlock except for it's intending use to protect IIO state changes.
* adis16080
- Replace core mlock usage with local lock with more appropriate scope.
* adis16130
- Remove pointless mlock usage.
* adis16240
- Remove include of gpio.h as no gpio usage.
* adis16400
- Fix some uninitialized variable build warnings.
* atlas-ph-sensor
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* bh1750
- Fix up a static compiler warning and make the code more readable.
- yaml conversion of binding + MAINTAINERS entry.
* bmp280
- Drop a stray newline.
* cm36651
- Drop a redundant assignment
* itg3200
- Alignment cleanup.
* max31856
- Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
- Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
- kernel-doc warning.
* stm32-timer counter
- kernel-doc warning.
- Alignment cleanup.
* sx9500
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tcs3414
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
----------------------------------------------------------------
Alexandru Ardelean (16):
iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions
iio: gyro: adis16130: remove mlock usage
iio: gyro: adis16080: replace mlock with own lock
iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
iio: imu: adis: rename txrx_lock -> state_lock
iio: imu: adis: add unlocked read/write function versions
iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
iio: imu: adis: create an unlocked version of adis_check_status()
iio: imu: adis: create an unlocked version of adis_reset()
iio: imu: adis: protect initial startup routine with state lock
iio: imu: adis: group single conversion under a single state lock
iio: imu: adis16400: rework locks using ADIS library's state lock
iio: gyro: adis16136: rework locks using ADIS library's state lock
iio: imu: adis16480: use state lock for filter freq set
iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
iio: imu: adis16400: fix compiler warnings
Andrea Merello (3):
iio: ad7949: kill pointless "readback"-handling code
iio: max31856: add missing of_node and parent references to iio_dev
iio: ad7949: fix incorrect SPI xfer len
Artur Rojek (3):
dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC
IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.
Baolin Wang (1):
iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
Bartosz Golaszewski (1):
iio: pressure: bmp280: remove stray newline
Colin Ian King (3):
iio: light: cm36651: redundant assignment to variable ret
counter: stm32: clean up indentation issue
iio: gyro: clean up indentation issue
Fabrice Gasnier (2):
counter: stm32-timer-cnt: fix a kernel-doc warning
counter: stm32-lptimer-cnt: fix a kernel-doc warning
Jean-Baptiste Maneyrol (7):
iio: imu: inv_mpu6050: disable i2c mux for MPU925x
iio: imu: inv_mpu6050: add header include protection macro
iio: imu: inv_mpu6050: add defines for supporting 9-axis chips
iio: imu: inv_mpu6050: fix objects syntax in Makefile
iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus
iio: imu: inv_mpu6050: add MPU925x magnetometer support
iio: imu: inv_mpu6050: add fifo support for magnetometer data
Krzysztof Wilczynski (1):
iio: light: bh1750: Resolve compiler warning and make code more readable
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: enable LIR for sensor events
iio: imu: st_lsm6dsx: enable clear on read for latched interrupts
Mircea Caprioru (2):
iio: adc: ad_sigma_delta: Export ad_sd_calibrate
staging: iio: adc: ad7192: Add system calibration support
Phil Reid (2):
dt-binding: iio: Add optional label property
iio: core: Add optional symbolic label to device attributes
Rohit Sarkar (1):
staging: iio: ADIS16240: Remove unused include
Sean Nyekjaer (5):
iio: imu: st_lsm6dsx: move interrupt thread to core
iio: imu: st_lsm6dsx: add motion events
iio: imu: st_lsm6dsx: add wakeup-source option
iio: imu: st_lsm6dsx: always enter interrupt thread
iio: imu: st_lsm6dsx: add motion report function and call from interrupt
Tomasz Duszynski (2):
dt-bindings: iio: light: bh1750: convert bindings to yaml
MAINTAINERS: add entry for ROHM BH1750 driver
Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 24 ++
.../devicetree/bindings/iio/adc/ingenic,adc.txt | 1 +
.../devicetree/bindings/iio/iio-bindings.txt | 5 +
.../devicetree/bindings/iio/light/bh1750.txt | 18 -
.../devicetree/bindings/iio/light/bh1750.yaml | 43 ++
MAINTAINERS | 6 +
drivers/counter/stm32-lptimer-cnt.c | 2 +-
drivers/counter/stm32-timer-cnt.c | 6 +-
drivers/iio/adc/ad7949.c | 33 +-
drivers/iio/adc/ad_sigma_delta.c | 3 +-
drivers/iio/adc/ingenic-adc.c | 149 +++++--
drivers/iio/adc/sc27xx_adc.c | 16 +-
drivers/iio/chemical/atlas-ph-sensor.c | 8 +-
drivers/iio/gyro/adis16080.c | 8 +-
drivers/iio/gyro/adis16130.c | 2 -
drivers/iio/gyro/adis16136.c | 31 +-
drivers/iio/gyro/itg3200_core.c | 2 +-
drivers/iio/imu/adis.c | 95 ++---
drivers/iio/imu/adis16400.c | 61 ++-
drivers/iio/imu/adis16480.c | 17 +-
drivers/iio/imu/adis_buffer.c | 4 +-
drivers/iio/imu/inv_mpu6050/Makefile | 7 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 204 ++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h | 19 +
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 152 +++++++-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 60 ++-
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 70 +++-
drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 356 +++++++++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h | 36 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 11 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 86 +++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 50 +++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 78 +---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 434 ++++++++++++++++++++-
drivers/iio/industrialio-core.c | 17 +
drivers/iio/light/bh1750.c | 4 +-
drivers/iio/light/cm36651.c | 2 +-
drivers/iio/light/tcs3414.c | 30 +-
drivers/iio/pressure/bmp280-core.c | 1 -
drivers/iio/proximity/sx9500.c | 16 +-
drivers/iio/temperature/max31856.c | 2 +
drivers/staging/iio/accel/adis16240.c | 1 -
drivers/staging/iio/adc/ad7192.c | 79 +++-
include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
include/linux/iio/adc/ad_sigma_delta.h | 2 +
include/linux/iio/iio.h | 2 +
include/linux/iio/imu/adis.h | 154 +++++++-
47 files changed, 2082 insertions(+), 326 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/light/bh1750.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/bh1750.yaml
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h
next reply other threads:[~2019-10-12 11:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-12 11:19 Jonathan Cameron [this message]
2019-10-12 15:27 ` [PULL v2] First set of iio new device support etc for the 5.5 cycle Greg KH
2019-10-12 15:28 ` Greg KH
2019-10-12 16:06 ` Jonathan Cameron
2019-10-12 18:41 ` Alexandru Ardelean
2019-10-13 7:59 ` Greg KH
2019-10-13 8:09 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191012121946.051b646f@archlinux \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).