[PATCH AUTOSEL 4.9 09/29] iio: fix center temperature of bmc150-accel-core

[PATCH AUTOSEL 4.9 09/29] iio: fix center temperature of bmc150-accel-core

[Sasha Levin]

From: Pascal Bouwmann <bouwmann@tau-tec.de>

[ Upstream commit 6c59a962e081df6d8fe43325bbfabec57e0d4751 ]

The center temperature of the supported devices stored in the constant
BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.

It seems that some datasheets were inconsistent on this value leading
to the error.  For most usecases will only make minor difference so
not queued for stable.

Signed-off-by: Pascal Bouwmann <bouwmann@tau-tec.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/accel/bmc150-accel-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index c3888822add1a..b6254ce9ab3b3 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -125,7 +125,7 @@
 #define BMC150_ACCEL_SLEEP_1_SEC		0x0F
 
 #define BMC150_ACCEL_REG_TEMP			0x08
-#define BMC150_ACCEL_TEMP_CENTER_VAL		24
+#define BMC150_ACCEL_TEMP_CENTER_VAL		23
 
 #define BMC150_ACCEL_AXIS_TO_REG(axis)	(BMC150_ACCEL_REG_XOUT_L + (axis * 2))
 #define BMC150_AUTO_SUSPEND_DELAY_MS		2000
-- 
2.20.1

[PATCH AUTOSEL 4.9 23/29] iio: adc: ad799x: fix probe error handling

[Sasha Levin]

From: Marco Felsch <m.felsch@pengutronix.de>

[ Upstream commit c62dd44901cfff12acc5792bf3d2dec20bcaf392 ]

Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.

Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad799x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 9704090b79084..cd6dbe95125b3 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -817,10 +817,10 @@ static int ad799x_probe(struct i2c_client *client,
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-- 
2.20.1

[PATCH AUTOSEL 4.9 24/29] iio: light: opt3001: fix mutex unlock race

[Sasha Levin]

From: David Frey <dpfrey@gmail.com>

[ Upstream commit 82f3015635249a8c8c45bac303fd84905066f04f ]

When an end-of-conversion interrupt is received after performing a
single-shot reading of the light sensor, the driver was waking up the
result ready queue before checking opt->ok_to_ignore_lock to determine
if it should unlock the mutex. The problem occurred in the case where
the other thread woke up and changed the value of opt->ok_to_ignore_lock
to false prior to the interrupt thread performing its read of the
variable. In this case, the mutex would be unlocked twice.

Signed-off-by: David Frey <dpfrey@gmail.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/light/opt3001.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 78c9b3a6453ae..be55477de2acc 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -695,6 +695,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 	struct iio_dev *iio = _iio;
 	struct opt3001 *opt = iio_priv(iio);
 	int ret;
+	bool wake_result_ready_queue = false;
 
 	if (!opt->ok_to_ignore_lock)
 		mutex_lock(&opt->lock);
@@ -729,13 +730,16 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
 		}
 		opt->result = ret;
 		opt->result_ready = true;
-		wake_up(&opt->result_ready_queue);
+		wake_result_ready_queue = true;
 	}
 
 out:
 	if (!opt->ok_to_ignore_lock)
 		mutex_unlock(&opt->lock);
 
+	if (wake_result_ready_queue)
+		wake_up(&opt->result_ready_queue);
+
 	return IRQ_HANDLED;
 }
 
-- 
2.20.1