Re: [PATCH v5 3/7] iio: light: al3320a slightly improve code formatting

From: Jonathan Cameron <jic23@kernel.org>
To: David Heidelberg <david@ixit.cz>
Cc: Dmitry Osipenko <digetx@gmail.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-iio@vger.kernel.org
Subject: Re: [PATCH v5 3/7] iio: light: al3320a slightly improve code formatting
Date: Sat, 15 Feb 2020 17:08:01 +0000	[thread overview]
Message-ID: <20200215170801.668edf1b@archlinux> (raw)
In-Reply-To: <20200211191201.1049902-4-david@ixit.cz>

On Tue, 11 Feb 2020 20:11:57 +0100
David Heidelberg <david@ixit.cz> wrote:

> - modified to be in part with al3010 driver
> - cleanup using bitfield, no functionality change intended
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
One issue below. Fixed up and applied.

Thanks,

Jonathan

> ---
> v4
>  - use GENMASK() and bitfields
>  - sort headers
>  - drop init.h unused header
> 
>  drivers/iio/light/al3320a.c | 22 ++++++++++++----------
>  1 file changed, 12 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
> index a21aa99e74e4..89b935b4fe9e 100644
> --- a/drivers/iio/light/al3320a.c
> +++ b/drivers/iio/light/al3320a.c
> @@ -9,9 +9,9 @@
>   * TODO: interrupt support, thresholds
>   */
>  
> -#include <linux/module.h>
> -#include <linux/init.h>
> +#include <linux/bitfield.h>
>  #include <linux/i2c.h>
> +#include <linux/module.h>
>  
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> @@ -36,8 +36,7 @@
>  #define AL3320A_CONFIG_DISABLE		0x00
>  #define AL3320A_CONFIG_ENABLE		0x01
>  
> -#define AL3320A_GAIN_SHIFT		1
> -#define AL3320A_GAIN_MASK		(BIT(2) | BIT(1))
> +#define AL3320A_GAIN_MASK		GENMASK(2, 1)
>  
>  /* chip params default values */
>  #define AL3320A_DEFAULT_MEAN_TIME	4
> @@ -90,7 +89,8 @@ static int al3320a_init(struct al3320a_data *data)
>  		return ret;
>  
>  	ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
> -					AL3320A_RANGE_3 << AL3320A_GAIN_SHIFT);
> +					FIELD_PREP(AL3320A_GAIN_MASK,
> +						   AL3320A_RANGE_3));
>  	if (ret < 0)
>  		return ret;
>  
> @@ -133,7 +133,7 @@ static int al3320a_read_raw(struct iio_dev *indio_dev,
>  		if (ret < 0)
>  			return ret;
>  
> -		ret = (ret & AL3320A_GAIN_MASK) >> AL3320A_GAIN_SHIFT;
> +		ret = FIELD_GET(AL3320A_GAIN_MASK, ret)
Missing semicolon.  I fixed up.


>  		*val = al3320a_scales[ret][0];
>  		*val2 = al3320a_scales[ret][1];
>  
> @@ -152,11 +152,13 @@ static int al3320a_write_raw(struct iio_dev *indio_dev,
>  	switch (mask) {
>  	case IIO_CHAN_INFO_SCALE:
>  		for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
> -			if (val == al3320a_scales[i][0] &&
> -			    val2 == al3320a_scales[i][1])
> -				return i2c_smbus_write_byte_data(data->client,
> +			if (val != al3320a_scales[i][0] ||
> +			    val2 != al3320a_scales[i][1])
> +				continue;
> +
> +			return i2c_smbus_write_byte_data(data->client,
>  					AL3320A_REG_CONFIG_RANGE,
> -					i << AL3320A_GAIN_SHIFT);
> +					FIELD_PREP(AL3320A_GAIN_MASK, i));
>  		}
>  		break;
>  	}