Linux-IIO Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: David Heidelberg <david@ixit.cz>
Cc: Dmitry Osipenko <digetx@gmail.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-iio@vger.kernel.org
Subject: Re: [PATCH v5 5/7] iio: light: al3320a implement suspend support
Date: Sat, 15 Feb 2020 17:15:26 +0000
Message-ID: <20200215171526.6de754b4@archlinux> (raw)
In-Reply-To: <20200211191201.1049902-6-david@ixit.cz>

On Tue, 11 Feb 2020 20:11:59 +0100
David Heidelberg <david@ixit.cz> wrote:

> AL3320a is fairly simple chip, so for suspend is enough to disable and
> later enable it again.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
Applied with a small tweak mentioned below.

Thanks,

Jonathan

> ---
>  drivers/iio/light/al3320a.c | 30 +++++++++++++++++++++++++-----
>  1 file changed, 25 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
> index 89b935b4fe9e..affa4c6c199a 100644
> --- a/drivers/iio/light/al3320a.c
> +++ b/drivers/iio/light/al3320a.c
> @@ -7,6 +7,9 @@
>   * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
>   *
>   * TODO: interrupt support, thresholds
> + * When the driver will get support for interrupt handling, then interrupt
> + * will need to be disabled before turning sensor OFF in order to avoid
> + * potential races with the interrupt handling.
>   */
>  
>  #include <linux/bitfield.h>
> @@ -78,13 +81,18 @@ static const struct attribute_group al3320a_attribute_group = {
>  	.attrs = al3320a_attributes,
>  };
>  
> +static int al3320a_set_pwr(struct i2c_client *client, bool pwr)
> +{
> +	u8 val = pwr ? AL3320A_CONFIG_ENABLE : AL3320A_CONFIG_DISABLE;
> +	return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG, val);
> +}
> +
>  static int al3320a_init(struct al3320a_data *data)
>  {
>  	int ret;
>  
> -	/* power on */
> -	ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
> -					AL3320A_CONFIG_ENABLE);
> +	ret = al3320a_set_pwr(data->client, true);
> +
>  	if (ret < 0)
>  		return ret;
>  
> @@ -203,10 +211,21 @@ static int al3320a_probe(struct i2c_client *client,
>  
>  static int al3320a_remove(struct i2c_client *client)
>  {
> -	return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG,
> -					 AL3320A_CONFIG_DISABLE);
> +	return al3320a_set_pwr(client, false);
>  }
>  
> +static int __maybe_unused al3320a_suspend(struct device *dev)
> +{
> +	return al3320a_set_pwr(to_i2c_client(dev), false);
> +}
> +
> +static int __maybe_unused al3320a_resume(struct device *dev)
> +{
> +	return al3320a_set_pwr(to_i2c_client(dev), true);
> +}
> +
> +SIMPLE_DEV_PM_OPS(al3320a_pm_ops, al3320a_suspend, al3320a_resume);
Build test showed this is missing a static.
Added.
> +
>  static const struct i2c_device_id al3320a_id[] = {
>  	{"al3320a", 0},
>  	{}
> @@ -216,6 +235,7 @@ MODULE_DEVICE_TABLE(i2c, al3320a_id);
>  static struct i2c_driver al3320a_driver = {
>  	.driver = {
>  		.name = AL3320A_DRV_NAME,
> +		.pm = &al3320a_pm_ops,
>  	},
>  	.probe		= al3320a_probe,
>  	.remove		= al3320a_remove,


  reply index

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11 19:11 [PATCH v5 0/7] iio: light: AL3010 introduction David Heidelberg
2020-02-11 19:11 ` [PATCH v5 1/7] dt-bindings: iio: light: add support for Dyna-Image AL3320A David Heidelberg
2020-02-15 16:59   ` Jonathan Cameron
2020-02-18 21:01   ` Rob Herring
2020-02-11 19:11 ` [PATCH v5 2/7] dt-bindings: iio: light: add support for Dyna-Image AL3010 David Heidelberg
2020-02-15 17:00   ` Jonathan Cameron
2020-02-18 21:01   ` Rob Herring
2020-02-11 19:11 ` [PATCH v5 3/7] iio: light: al3320a slightly improve code formatting David Heidelberg
2020-02-15 17:08   ` Jonathan Cameron
2020-02-11 19:11 ` [PATCH v5 4/7] iio: light: add Dyna-Image AL3010 driver David Heidelberg
2020-02-14 15:58   ` Jonathan Cameron
2020-02-14 22:09   ` [PATCH v6] " David Heidelberg
2020-02-15 17:09     ` Jonathan Cameron
2020-02-11 19:11 ` [PATCH v5 5/7] iio: light: al3320a implement suspend support David Heidelberg
2020-02-15 17:15   ` Jonathan Cameron [this message]
2020-02-15 17:34     ` David Heidelberg
2020-02-15 18:34       ` Jonathan Cameron
2020-02-15 17:20   ` Jonathan Cameron
2020-02-11 19:12 ` [PATCH v5 6/7] iio: light: al3320a implement devm_add_action_or_reset David Heidelberg
2020-02-15 17:22   ` Jonathan Cameron
2020-02-15 18:38   ` Jonathan Cameron
2020-02-15 19:42     ` David Heidelberg
2020-02-21 11:11       ` Jonathan Cameron
2020-02-11 19:12 ` [PATCH v5 7/7] iio: light: al3320a allow module autoload and polish David Heidelberg
2020-02-15 17:22   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200215171526.6de754b4@archlinux \
    --to=jic23@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=david@ixit.cz \
    --cc=digetx@gmail.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-IIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iio/0 linux-iio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iio linux-iio/ https://lore.kernel.org/linux-iio \
		linux-iio@vger.kernel.org
	public-inbox-index linux-iio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-iio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git