linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: <jic23@kernel.org>, <alexandre.torgue@st.com>,
	<fabrice.gasnier@st.com>,
	Sergiu Cuciurean <sergiu.cuciurean@analog.com>,
	Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v2] iio: stm32-dac: Replace indio_dev->mlock with own device lock
Date: Wed, 26 Aug 2020 15:00:42 +0300	[thread overview]
Message-ID: <20200826120042.200364-1-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20200826063850.47625-1-alexandru.ardelean@analog.com>

From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock. The lock protects against potential races when
reading the CR reg and then updating, so that the state of pm_runtime
is consistent between the two operations.

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/dac/stm32-dac.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
index 092c796fa3d9..7a8aed476850 100644
--- a/drivers/iio/dac/stm32-dac.c
+++ b/drivers/iio/dac/stm32-dac.c
@@ -26,9 +26,11 @@
 /**
  * struct stm32_dac - private data of DAC driver
  * @common:		reference to DAC common data
+ * @lock:		lock to protect the data buffer during regmap ops
  */
 struct stm32_dac {
 	struct stm32_dac_common *common;
+	struct mutex		lock;
 };
 
 static int stm32_dac_is_enabled(struct iio_dev *indio_dev, int channel)
@@ -58,10 +60,10 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
 	int ret;
 
 	/* already enabled / disabled ? */
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&dac->lock);
 	ret = stm32_dac_is_enabled(indio_dev, ch);
 	if (ret < 0 || enable == !!ret) {
-		mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&dac->lock);
 		return ret < 0 ? ret : 0;
 	}
 
@@ -69,13 +71,13 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
 		ret = pm_runtime_get_sync(dev);
 		if (ret < 0) {
 			pm_runtime_put_noidle(dev);
-			mutex_unlock(&indio_dev->mlock);
+			mutex_unlock(&dac->lock);
 			return ret;
 		}
 	}
 
 	ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, en);
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&dac->lock);
 	if (ret < 0) {
 		dev_err(&indio_dev->dev, "%s failed\n", en ?
 			"Enable" : "Disable");
@@ -327,6 +329,8 @@ static int stm32_dac_probe(struct platform_device *pdev)
 	indio_dev->info = &stm32_dac_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	mutex_init(&dac->lock);
+
 	ret = stm32_dac_chan_of_init(indio_dev);
 	if (ret < 0)
 		return ret;
-- 
2.25.1


  parent reply	other threads:[~2020-08-26 12:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-26  6:38 [PATCH] iio: stm32-dac: Replace indio_dev->mlock with own device lock Alexandru Ardelean
2020-08-26  8:57 ` Fabrice Gasnier
2020-08-26 10:01   ` Alexandru Ardelean
2020-08-26 12:00 ` Alexandru Ardelean [this message]
2020-08-27  8:55   ` [PATCH v2] " Alexandru Ardelean
2020-08-27  9:03     ` Fabrice Gasnier
2020-08-27 10:00       ` Alexandru Ardelean
2020-08-29 15:46         ` Jonathan Cameron
2020-09-02  6:12           ` Alexandru Ardelean
2020-09-16  9:23 ` Alexandru Ardelean
2020-09-16 10:18   ` Fabrice Gasnier
2020-09-16 17:52     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200826120042.200364-1-alexandru.ardelean@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=alexandre.torgue@st.com \
    --cc=fabrice.gasnier@st.com \
    --cc=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=sergiu.cuciurean@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).