linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Crt Mori <cmo@melexis.com>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: Re: [PATCH v6 0/5] iio: temperature: mlx90632: Add extended calibration calculations
Date: Sat, 29 Aug 2020 18:28:01 +0100	[thread overview]
Message-ID: <20200829182801.19f028ef@archlinux> (raw)
In-Reply-To: <20200818213737.140613-1-cmo@melexis.com>

On Tue, 18 Aug 2020 23:37:32 +0200
Crt Mori <cmo@melexis.com> wrote:

> Add extended calibration calculations for the new subversion of DSP5.
> 
> V6 review comments from Andy Shevchenko <andy.shevchenko@gmail.com:
> 	 - Covert all while loops to regmap_read_poll_timeout or
> 	   read_poll_timeout even though udelay of more than 20ms is used
> 	   in the second. Problem was, that timeout needs to be 800ms,
> 	   while polling frequency could be 20ms, but we konw that that
> 	   will generate more noise on line than needed. Did some tests and
> 	   current number combination seems best. This also caused that
> 	   commit messages were adjusted.
> V5 review comments from Andy Shevchenko <andy.shevchenko@gmail.com:
> 	 -  Swap order of patches to avoid re-doing the calculations
> 	 - Add fixed name defines for Ambient and Object RAM temperature
> 	   channels as per suggestion of the Jonathan Cameron <jic23@kernel.org>
> V5:
> 	 - Add style changes patch along with current series.
> 
> V4 review comments from Andy Shevchenko <andy.shevchenko@gmail.com>:
> 	 - Move the function creation for Ta4 to first patch
> 	 - Add kernel doc patch for documenting internal struct
> 	 - Add patch to convert while loops to do-while loops for
> 	   polling
> 
> V3 review comments from Andy Shevchenko <andy.shevchenko@gmail.com>:
> 	 - Change commit message text to more proper English as per suggestions
> 	 - Drop unneeded brackets and parentheses
> 	 - Use defines from limits.h
> 	 - Remove userspace typedefs as leftovers from porting
> 	 - Testing of timeout loops with iopoll.h was no successful,
> 	   because delay between measurements is 10ms, but we need to
> 	   fill at least 3 channels, so final timeout should be 40ms
> 	   which is out of scope of usleep function
> 	 - Fixing some typos in comments
> 
> V2 review comments from Andy Shevchenko <andy.shevchenko@gmail.com>:
> 	 - Convert divison back to shifts to make it more readable
> 
> Crt Mori (5):
>   iio:temperature:mlx90632: Reduce number of equal calulcations
>   iio:temperature:mlx90632: Add kerneldoc to the internal struct
>   iio:temperature:mlx90632: Convert polling while loop to regmap
>   iio:temperature:mlx90632: Adding extended calibration option
>   iio:temperature:mlx90632: Some stylefixing leftovers
> 
>  drivers/iio/temperature/mlx90632.c | 274 ++++++++++++++++++++++++++---
>  1 file changed, 247 insertions(+), 27 deletions(-)
> 

Thanks.  Also thanks to Andy for all his review work on these!

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to try and break it.

Thanks,

Jonathan

      parent reply	other threads:[~2020-08-29 17:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-18 21:37 Crt Mori
2020-08-18 21:37 ` [PATCH v6 1/5] iio:temperature:mlx90632: Reduce number of equal calulcations Crt Mori
2020-08-18 21:37 ` [PATCH v6 2/5] iio:temperature:mlx90632: Add kerneldoc to the internal struct Crt Mori
2020-08-18 21:37 ` [PATCH v6 3/5] iio:temperature:mlx90632: Convert polling while loop to regmap Crt Mori
2020-08-19  8:08   ` Andy Shevchenko
2020-08-18 21:37 ` [PATCH v6 4/5] iio:temperature:mlx90632: Adding extended calibration option Crt Mori
2020-08-18 21:37 ` [PATCH v6 5/5] iio:temperature:mlx90632: Some stylefixing leftovers Crt Mori
2020-08-19  8:10   ` Andy Shevchenko
2020-08-29 17:28 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200829182801.19f028ef@archlinux \
    --to=jic23@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=cmo@melexis.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH v6 0/5] iio: temperature: mlx90632: Add extended calibration calculations' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).