[PATCH 4/4] iio: accel: bmc150: Add support for BMC156

[Stephan Gerhold <stephan@gerhold.net>]

BMC156 is another accelerometer that works just fine with the bmc150-accel
driver. It's very similar to BMC150 (also a accelerometer+magnetometer
combo) but with only one accelerometer interrupt pin. It would make sense
if only INT1 was exposed but someone at Bosch was crazy and decided to only
have an INT2 pin.

Try to deal with this by making use of the INT2 support introduced
in the previous commit and force using INT2 for BMC156. To detect
that we need to bring up a simplified version of the previous type IDs.

Note that unlike the type IDs removed in commit c06a6aba6835
("iio: accel: bmc150: Drop misleading/duplicate chip identifiers")
here I only add one for the special case of BMC156. Everything else
still happens by reading the CHIP_ID register since the chip type
information often is not accurate in ACPI tables.

Tested-by: Nikita Travkin <nikita@trvn.ru> # BMC156
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/iio/accel/Kconfig             |  5 +++--
 drivers/iio/accel/bmc150-accel-core.c |  8 +++++---
 drivers/iio/accel/bmc150-accel-i2c.c  | 10 ++++++++--
 drivers/iio/accel/bmc150-accel-spi.c  | 10 +++++++++-
 drivers/iio/accel/bmc150-accel.h      |  9 ++++++++-
 5 files changed, 33 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 0e56ace61103..2f0c0d512ae7 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -143,10 +143,11 @@ config BMC150_ACCEL
 	select BMC150_ACCEL_SPI if SPI
 	help
 	  Say yes here to build support for the following Bosch accelerometers:
-	  BMA222, BMA222E, BMA250E, BMA253, BMA254, BMA255, BMA280, BMC150, BMI055.
+	  BMA222, BMA222E, BMA250E, BMA253, BMA254, BMA255, BMA280, BMC150, BMC156
+	  BMI055.
 
 	  Note that some of these are combo modules:
-	    - BMC150: accelerometer and magnetometer
+	    - BMC150/BMC156: accelerometer and magnetometer
 	    - BMI055: accelerometer and gyroscope
 
 	  This driver is only implementing accelerometer part, which has
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 8d3dd3c2bcc2..a5d321e878ef 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -553,7 +553,7 @@ static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev,
 	 * Without interrupt-names, we assume the irq belongs to INT1.
 	 */
 	irq_info = bmc150_accel_interrupts_int1;
-	if (irq == of_irq_get_byname(dev->of_node, "INT2"))
+	if (data->type == BOSCH_BMC156 || irq == of_irq_get_byname(dev->of_node, "INT2"))
 		irq_info = bmc150_accel_interrupts_int2;
 
 	for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++)
@@ -1174,7 +1174,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {306458, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	{
-		.name = "BMA253/BMA254/BMA255/BMC150/BMI055",
+		.name = "BMA253/BMA254/BMA255/BMC150/BMC156/BMI055",
 		.chip_id = 0xFA,
 		.channels = bmc150_accel_channels,
 		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
@@ -1661,7 +1661,8 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
 }
 
 int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
-			    const char *name, bool block_supported)
+			    enum bmc150_type type, const char *name,
+			    bool block_supported)
 {
 	const struct attribute **fifo_attrs;
 	struct bmc150_accel_data *data;
@@ -1676,6 +1677,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
 	dev_set_drvdata(dev, indio_dev);
 
 	data->regmap = regmap;
+	data->type = type;
 
 	if (!bmc150_apply_acpi_orientation(dev, &data->orientation)) {
 		ret = iio_read_mount_matrix(dev, &data->orientation);
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
index 999495f0669d..88bd8a25f142 100644
--- a/drivers/iio/accel/bmc150-accel-i2c.c
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -176,6 +176,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
 {
 	struct regmap *regmap;
 	const char *name = NULL;
+	enum bmc150_type type = BOSCH_UNKNOWN;
 	bool block_supported =
 		i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
 		i2c_check_functionality(client->adapter,
@@ -188,10 +189,13 @@ static int bmc150_accel_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	if (id)
+	if (id) {
 		name = id->name;
+		type = id->driver_data;
+	}
 
-	ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq, name, block_supported);
+	ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq,
+				      type, name, block_supported);
 	if (ret)
 		return ret;
 
@@ -236,6 +240,7 @@ static const struct i2c_device_id bmc150_accel_id[] = {
 	{"bma255"},
 	{"bma280"},
 	{"bmc150_accel"},
+	{"bmc156_accel", BOSCH_BMC156},
 	{"bmi055_accel"},
 	{}
 };
@@ -251,6 +256,7 @@ static const struct of_device_id bmc150_accel_of_match[] = {
 	{ .compatible = "bosch,bma255" },
 	{ .compatible = "bosch,bma280" },
 	{ .compatible = "bosch,bmc150_accel" },
+	{ .compatible = "bosch,bmc156_accel" },
 	{ .compatible = "bosch,bmi055_accel" },
 	{ },
 };
diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c
index 54b8c9c8068b..191e312dc91a 100644
--- a/drivers/iio/accel/bmc150-accel-spi.c
+++ b/drivers/iio/accel/bmc150-accel-spi.c
@@ -16,6 +16,8 @@
 static int bmc150_accel_probe(struct spi_device *spi)
 {
 	struct regmap *regmap;
+	const char *name = NULL;
+	enum bmc150_type type = BOSCH_UNKNOWN;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 
 	regmap = devm_regmap_init_spi(spi, &bmc150_regmap_conf);
@@ -24,7 +26,12 @@ static int bmc150_accel_probe(struct spi_device *spi)
 		return PTR_ERR(regmap);
 	}
 
-	return bmc150_accel_core_probe(&spi->dev, regmap, spi->irq, id->name,
+	if (id) {
+		name = id->name;
+		type = id->driver_data;
+	}
+
+	return bmc150_accel_core_probe(&spi->dev, regmap, spi->irq, type, name,
 				       true);
 }
 
@@ -54,6 +61,7 @@ static const struct spi_device_id bmc150_accel_id[] = {
 	{"bma255"},
 	{"bma280"},
 	{"bmc150_accel"},
+	{"bmc156_accel", BOSCH_BMC156},
 	{"bmi055_accel"},
 	{}
 };
diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
index 47121f070fe9..a3f4905e48a3 100644
--- a/drivers/iio/accel/bmc150-accel.h
+++ b/drivers/iio/accel/bmc150-accel.h
@@ -13,6 +13,11 @@ struct i2c_client;
 struct bmc150_accel_chip_info;
 struct bmc150_accel_interrupt_info;
 
+enum bmc150_type {
+	BOSCH_UNKNOWN,
+	BOSCH_BMC156,
+};
+
 struct bmc150_accel_interrupt {
 	const struct bmc150_accel_interrupt_info *info;
 	atomic_t users;
@@ -62,6 +67,7 @@ struct bmc150_accel_data {
 	int ev_enable_state;
 	int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
 	const struct bmc150_accel_chip_info *chip_info;
+	enum bmc150_type type;
 	struct i2c_client *second_device;
 	void (*resume_callback)(struct device *dev);
 	struct delayed_work resume_work;
@@ -69,7 +75,8 @@ struct bmc150_accel_data {
 };
 
 int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
-			    const char *name, bool block_supported);
+			    enum bmc150_type type, const char *name,
+			    bool block_supported);
 int bmc150_accel_core_remove(struct device *dev);
 extern const struct dev_pm_ops bmc150_accel_pm_ops;
 extern const struct regmap_config bmc150_regmap_conf;
-- 
2.32.0