linux-iio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com>
To: Jonathan Cameron <jic23@kernel.org>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	"tiantao (H)" <tiantao6@hisilicon.com>
Subject: RE: [PATCH 1/7] iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce boilerplate
Date: Fri, 2 Apr 2021 20:10:38 +0000	[thread overview]
Message-ID: <339f74d2c0f64516b697b17aa306d20e@hisilicon.com> (raw)
In-Reply-To: <20210402184544.488862-2-jic23@kernel.org>



> -----Original Message-----
> From: Jonathan Cameron [mailto:jic23@kernel.org]
> Sent: Saturday, April 3, 2021 7:46 AM
> To: linux-iio@vger.kernel.org
> Cc: Song Bao Hua (Barry Song) <song.bao.hua@hisilicon.com>; Jonathan Cameron
> <jonathan.cameron@huawei.com>; Lars-Peter Clausen <lars@metafoo.de>
> Subject: [PATCH 1/7] iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce
> boilerplate
> 
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> As iio_poll_trigger() is safe against spurious interrupts when the
> trigger is not enabled, this is not a fix despite looking like
> a race.  It is nice to simplify the code however so the interrupt
> is never enabled in the first place.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> ---

Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>

BTW, +Cc Tiantao as Tao might be moving drivers to
use IRQF_NO_AUTOEN.


>  drivers/iio/adc/ad7766.c | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7766.c b/drivers/iio/adc/ad7766.c
> index 829a3426f235..1e41759f3ee5 100644
> --- a/drivers/iio/adc/ad7766.c
> +++ b/drivers/iio/adc/ad7766.c
> @@ -255,18 +255,17 @@ static int ad7766_probe(struct spi_device *spi)
>  		ad7766->trig->ops = &ad7766_trigger_ops;
>  		iio_trigger_set_drvdata(ad7766->trig, ad7766);
> 
> -		ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
> -			IRQF_TRIGGER_FALLING, dev_name(&spi->dev),
> -			ad7766->trig);
> -		if (ret < 0)
> -			return ret;
> -
>  		/*
>  		 * The device generates interrupts as long as it is powered up.
>  		 * Some platforms might not allow the option to power it down so
> -		 * disable the interrupt to avoid extra load on the system
> +		 * don't enable the interrupt to avoid extra load on the system
>  		 */
> -		disable_irq(spi->irq);
> +		ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
> +				       IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
> +				       dev_name(&spi->dev),
> +				       ad7766->trig);
> +		if (ret < 0)
> +			return ret;
> 
>  		ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
>  		if (ret)
> --
> 2.31.1


  reply	other threads:[~2021-04-02 20:10 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-02 18:45 [PATCH 0/7] iio: Use IRQF_NO_AUTOEN Jonathan Cameron
2021-04-02 18:45 ` [PATCH 1/7] iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce boilerplate Jonathan Cameron
2021-04-02 20:10   ` Song Bao Hua (Barry Song) [this message]
2021-04-05 14:27     ` Jonathan Cameron
2021-04-02 18:45 ` [PATCH 2/7] iio:adc:exynos-adc: Use new IRQF_NO_AUTOEN flag rather than separate irq_disable() Jonathan Cameron
2021-04-02 20:11   ` Song Bao Hua (Barry Song)
2021-04-04 19:20   ` Krzysztof Kozlowski
2021-04-05 14:29     ` Jonathan Cameron
2021-04-02 18:45 ` [PATCH 3/7] iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request then disable Jonathan Cameron
2021-04-02 20:12   ` Song Bao Hua (Barry Song)
2021-04-05 14:33     ` Jonathan Cameron
2021-04-02 18:45 ` [PATCH 4/7] iio:adc:sun4i-gpadc: Use new IRQF_NO_AUTOEN flag " Jonathan Cameron
2021-04-02 20:13   ` Song Bao Hua (Barry Song)
2021-04-05 14:35     ` Jonathan Cameron
2021-04-02 18:45 ` [PATCH 5/7] iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq " Jonathan Cameron
2021-04-02 20:14   ` Song Bao Hua (Barry Song)
2021-04-05 14:36     ` Jonathan Cameron
2021-04-02 18:45 ` [PATCH 6/7] iio:imu:adis: Use IRQF_NO_AUTOEN instead of " Jonathan Cameron
2021-04-02 20:37   ` Song Bao Hua (Barry Song)
2021-04-05 14:40     ` Jonathan Cameron
2021-04-06 11:48       ` Sa, Nuno
2021-04-02 18:45 ` [PATCH 7/7] iio:adc:ad_sigma_delta: Use IRQF_NO_AUTOEN rather than request and disable Jonathan Cameron
2021-04-02 20:30   ` Song Bao Hua (Barry Song)
2021-04-05 14:51     ` Jonathan Cameron
2021-04-05 22:56       ` Song Bao Hua (Barry Song)
2021-04-02 19:00 ` [PATCH 0/7] iio: Use IRQF_NO_AUTOEN Andy Shevchenko
2021-04-03 11:45 ` Lars-Peter Clausen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=339f74d2c0f64516b697b17aa306d20e@hisilicon.com \
    --to=song.bao.hua@hisilicon.com \
    --cc=jic23@kernel.org \
    --cc=jonathan.cameron@huawei.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=tiantao6@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).