* [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub
@ 2020-08-09 10:25 Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework Sandeep Singh
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Sandeep Singh @ 2020-08-09 10:25 UTC (permalink / raw)
To: jikos, benjamin.tissoires, linux-kernel, linux-input,
srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k, Sandeep Singh
From: Sandeep Singh <sandeep.singh@amd.com>
AMD SFH(Sensor Fusion Hub) is HID based driver.SFH FW is part of MP2
processor (MP2 which is an ARM® Cortex-M4 core based co-processor to x86)
and it runs on MP2 where in driver resides on X86.The driver
functionalities are divided into three parts:-
1: amd-mp2-pcie:- This module will communicate with MP2 FW and provide
that data into DRAM.
2: Client Layer:- This part for driver will use dram data and convert that
data into HID format based on HID reports.
3: Transport driver :- This part of driver will communicate with HID core.
Communication between devices and HID core is mostly
done via HID reports
In terms of architecture, it resembles like ISH(Intel Integrated Sensor
Hub).However the major difference is all the hid reports are generated
as part of kernel driver.
AMD SFH is integrated as a part of SoC, starting from 17h family of processors.
The solution is working well on several OEM products.
AMD SFH uses HID over PCIe bus.
Changes since v1:
-> Fix auto build test warnings
-> Fix smatch warnings "possible memory leak" -Reported by Dan Carpenter
Links of the review comments for v1:
[1] https://patchwork.kernel.org/patch/11325163/
[2] https://patchwork.kernel.org/patch/11325167/
[3] https://patchwork.kernel.org/patch/11325171/
[4] https://patchwork.kernel.org/patch/11325187/
Changes since v2:
-> Debugfs divided into another patch
-> Fix some cosmetic changes
-> Fix for review comments
Reported and Suggested by:- Srinivas Pandruvada
Links of the review comments for v2:
[1] https://patchwork.kernel.org/patch/11355491/
[2] https://patchwork.kernel.org/patch/11355495/
[3] https://patchwork.kernel.org/patch/11355499/
[4] https://patchwork.kernel.org/patch/11355503/
Changes since v3:
-> Removed debugfs suggested by - Benjamin Tissoires
Links of the review comments for v3:
[1] https://lkml.org/lkml/2020/2/11/1256
[2] https://lkml.org/lkml/2020/2/11/1257
[3] https://lkml.org/lkml/2020/2/11/1258
[4] https://lkml.org/lkml/2020/2/11/1259
[5] https://lkml.org/lkml/2020/2/11/1260
Changes since v4:
-> use PCI managed calls.
-> use kernel APIs
Links of the review comments for v4:
[1] https://lkml.org/lkml/2020/2/26/1360
[2] https://lkml.org/lkml/2020/2/26/1361
[3] https://lkml.org/lkml/2020/2/26/1362
[4] https://lkml.org/lkml/2020/2/26/1363
[5] https://lkml.org/lkml/2020/2/27/1
Changes since v5
- Fix for review comments by: Andy Shevchenko
- Fix for indentations erros, NULL pointer,Redundant assignment
- Drop LOCs in many location
- Create as a single driver module instead of two modules.
Links of the review comments for v5:
[1] https://lkml.org/lkml/2020/5/29/589
[2] https://lkml.org/lkml/2020/5/29/590
[3] https://lkml.org/lkml/2020/5/29/606
[4] https://lkml.org/lkml/2020/5/29/632
[5] https://lkml.org/lkml/2020/5/29/633
Sandeep Singh (4):
SFH: Add maintainers and documentation for AMD SFH based on HID
framework
SFH: PCIe driver to add support of AMD sensor fusion
SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH)
SFH: Create HID report to Enable support of AMD sensor fusion Hub
(SFH)
Documentation/hid/amd-sfh-hid.rst | 153 +++++
MAINTAINERS | 8 +
drivers/hid/Kconfig | 2 +
drivers/hid/Makefile | 2 +
drivers/hid/amd-sfh-hid/Kconfig | 21 +
drivers/hid/amd-sfh-hid/Makefile | 15 +
drivers/hid/amd-sfh-hid/amd_mp2_pcie.c | 162 +++++
drivers/hid/amd-sfh-hid/amd_mp2_pcie.h | 83 +++
drivers/hid/amd-sfh-hid/amdsfh_hid.c | 175 +++++
drivers/hid/amd-sfh-hid/amdsfh_hid.h | 68 ++
drivers/hid/amd-sfh-hid/amdsfh_hid_client.c | 220 ++++++
.../hid_descriptor/amd_sfh_hid_descriptor.c | 226 ++++++
.../hid_descriptor/amd_sfh_hid_descriptor.h | 121 ++++
.../amd_sfh_hid_report_descriptor.h | 645 ++++++++++++++++++
14 files changed, 1901 insertions(+)
create mode 100644 Documentation/hid/amd-sfh-hid.rst
create mode 100644 drivers/hid/amd-sfh-hid/Kconfig
create mode 100644 drivers/hid/amd-sfh-hid/Makefile
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid.c
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid.h
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid_client.c
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h
--
2.25.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v6 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework
2020-08-09 10:25 [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub Sandeep Singh
@ 2020-08-09 10:25 ` Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Sandeep Singh @ 2020-08-09 10:25 UTC (permalink / raw)
To: jikos, benjamin.tissoires, linux-kernel, linux-input,
srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k, Sandeep Singh
From: Sandeep Singh <sandeep.singh@amd.com>
Add Maintainers for AMD SFH(SENSOR FUSION HUB) Solution and work flow
document.
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
---
Documentation/hid/amd-sfh-hid.rst | 153 ++++++++++++++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 161 insertions(+)
create mode 100644 Documentation/hid/amd-sfh-hid.rst
diff --git a/Documentation/hid/amd-sfh-hid.rst b/Documentation/hid/amd-sfh-hid.rst
new file mode 100644
index 000000000000..0ee9003013f2
--- /dev/null
+++ b/Documentation/hid/amd-sfh-hid.rst
@@ -0,0 +1,153 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+AMD Sensor Fusion Hub:-
+======================
+AMD Sensor Fusion Hub is part of a SOC starting from Ryzen based platforms.
+The solution is working well on several OEM products. AMD SFH uses HID over PCIe bus.
+In terms of architecture it resembles ISH .However the major difference is all
+The hid reports are generated as part of kernel driver.
+
+Block Diagram:-
+=============
+ -------------------------------
+ | HID User Space Applications |
+ -------------------------------
+---------------------------------------------
+ ---------------------------------
+ | HID Core |
+ ---------------------------------
+
+ ---------------------------------
+ | AMD HID Transport |
+ ---------------------------------
+
+ --------------------------------
+ | AMD HID Client |
+ | with HID Report Generator|
+ --------------------------------
+
+ --------------------------------
+ | AMD MP2 PCIe Driver |
+ --------------------------------
+---------------------------------------------
+ -------------------------------
+ | SFH MP2 Processor |
+ --------------------------------
+
+
+AMD HID Transport Layer :-
+***************************
+AMD SFH transport is also implemented as a bus. Each client application executing in the AMD MP2
+is registered as a device on this bus. MP2 which is an ARM® Cortex-M4 core based co-processor to
+x86. The driver, which binds each device (AMD SFH HID driver) identifies the device type and
+registers with the hid core. Transport drivers attach a constant "struct hid_ll_driver" object with
+each device. Once a device is registered with HID core, the callbacks provided via this struct are
+used by HID core to communicate with the device. AMD HID Transport driver implements the synchronouscalls.
+
+AMD HID Client Layer:-
+**********************
+This layer is responsible to implement HID request and descriptors. As firmware is OS agnostic,
+HID client layer fills the HID request structure and descriptors. HID client layer is in complex
+in nature as it is interface between MP2 PCIe driver and HID. HID client layer initialized
+the MP2 PCIe driver and holds the instance of MP2 driver.It identified the number of sensors
+connected using MP2-PCIe driver and based on that allocate the DRAM address for each and every
+sensor and pass it to MP2-PCIe driver.On enumeration of each sensor, client layer fills out the HID
+Descriptor structure and HID input report structure. HID Feature report structure can be optional.
+The report descriptor structure varies sensor to sensor. Now on enumeration client layer does
+two major things
+1. Register the HID sensor client to virtual bus (Platform driver) and bind it.
+2. Probes the AMD HID transport driver. Which in turns register device to the core.
+
+AMD MP2 PCIe layer:-
+********************
+MP2 PCIe Layer is responsible for making all transaction with the firmware over PCIe.
+The connection establishment between firmware and PCIe happens here.
+
+The communication between X86 and MP2 is spilt into three parts.
+1. Command Transfer => C2P Mailbox Register are used
+2. Data Transfer => DRAM
+3. Supported sensor info => P2C Register
+
+Commands are sent to MP2 using C2P Mail Box registers. These C2P registers are common between x86
+and MP2. Writing into C2P Message register generate interrupt to MP2. The client layer allocates
+the physical memory and send the same to MP2 for data transfer. MP2 firmware uses HUBIF interface
+to access DRAM memory. For Firmware always write minimum 32 bytes into DRAM.So it is expected that
+driver shall allocate minimum 32 bytes DRAM space.
+
+Enumeration and Probing flow:-
+*****************************
+ HID AMD AMD AMD -PCIe MP2
+ Core Transport Client layer layer FW
+ | | | | |
+ | | | on Boot Driver Loaded |
+ | | | | |
+ | | | MP2-PCIe Int |
+ | | | | |
+ | | |---Get Number of sensors-> | |
+ | | | Read P2C |
+ | | | Register |
+ | | | | |
+ | | | Loop(for No of Sensors) | |
+ | | |----------------------| | |
+ | | | Create HID Descriptor| | |
+ | | | Create Input report | | |
+ | | | Descriptor Map | | |
+ | | | the MP2 FW Index to | | |
+ | | | HID Index | | |
+ | | | Allocate the DRAM | Enable |
+ | | | address | Sensors |
+ | | |----------------------| | |
+ | | HID transport| | Enable |
+ | |<--Probe------| |---Sensor CMD--> |
+ | | Create the | | |
+ | | HID device | | |
+ | | (MFD) | | |
+ | | by Populating| | |
+ | | the HID | | |
+ | | ll_driver | | |
+ | HID | | | |
+ | add | | | |
+ |Device | | | |
+ |<------------- | | | |
+
+
+Data Flow from Application to the AMD SFH Driver:-
+*************************************************
+
+ | | | | |
+Get | | | | |
+Input | | | | |
+Report | | | | |
+---> | | | | |
+ |HID_req | | | |
+ |get_report | | | |
+ |------------->| | | |
+ | | HID_get_input| | |
+ | | report | | |
+ | |------------->|------------------------| | |
+ | | | Read the DRAM data for| | |
+ | | | requested sensor and | | |
+ | | | create the HID input | | |
+ | | | report | | |
+ | | |------------------------| | |
+ | |Data received | | |
+ | | in HID report| | |
+ To |<-------------|<-------------| | |
+Applications | | | |
+<-------| | | | |
+
+
+Data Flow from AMD SFH Driver to Application:-
+**********************************************
+ | | | | |
+ | | |------------------------| | |
+ | | |Periodically Read | | |
+ | | |the data for all | | |
+ | | |enumerated sensors | | |
+ | | |from the dram and create| | |
+ | | | HID Input reports | | |
+ | | |------------------------| | |
+ | |HID Input | | |
+ | |Input report | | |
+ <----submit to Application-----| | |
+ | | | | |
diff --git a/MAINTAINERS b/MAINTAINERS
index d53db30d1365..fc6a712893fb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -934,6 +934,14 @@ S: Supported
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
F: drivers/net/ethernet/amd/xgbe/
+AMD SENSOR FUSION HUB DRIVER
+M: Nehal Shah <nehal-bakulchandra.shah@amd.com>
+M: Sandeep Singh <sandeep.singh@amd.com>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/hid/amd-sfh*
+F: drivers/hid/amd-sfh-hid/
+
ANALOG DEVICES INC AD5686 DRIVER
M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion
2020-08-09 10:25 [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework Sandeep Singh
@ 2020-08-09 10:25 ` Sandeep Singh
2020-08-09 11:54 ` kernel test robot
` (2 more replies)
2020-08-09 10:25 ` [PATCH v6 3/4] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH) Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion " Sandeep Singh
3 siblings, 3 replies; 9+ messages in thread
From: Sandeep Singh @ 2020-08-09 10:25 UTC (permalink / raw)
To: jikos, benjamin.tissoires, linux-kernel, linux-input,
srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k, Sandeep Singh
From: Sandeep Singh <sandeep.singh@amd.com>
AMD SFH uses HID over PCIe bus.SFH fw is part of MP2 processor
(MP2 which is an ARM® Cortex-M4 core based co-processor to x86) and
it runs on MP2 where in driver resides on X86. This part of module
will communicate with MP2 FW and provide that data into DRAM
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
---
drivers/hid/Kconfig | 2 +
drivers/hid/Makefile | 2 +
drivers/hid/amd-sfh-hid/Kconfig | 21 ++++
drivers/hid/amd-sfh-hid/Makefile | 15 +++
drivers/hid/amd-sfh-hid/amd_mp2_pcie.c | 162 +++++++++++++++++++++++++
drivers/hid/amd-sfh-hid/amd_mp2_pcie.h | 83 +++++++++++++
6 files changed, 285 insertions(+)
create mode 100644 drivers/hid/amd-sfh-hid/Kconfig
create mode 100644 drivers/hid/amd-sfh-hid/Makefile
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 45e87dc59d4e..c0a1c07ed6b1 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1174,4 +1174,6 @@ source "drivers/hid/i2c-hid/Kconfig"
source "drivers/hid/intel-ish-hid/Kconfig"
+source "drivers/hid/amd-sfh-hid/Kconfig"
+
endmenu
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index d8ea4b8c95af..7d8ca4e34572 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -141,3 +141,5 @@ obj-$(CONFIG_I2C_HID) += i2c-hid/
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
+
+obj-$(CONFIG_AMD_SFH_HID) += amd-sfh-hid/
diff --git a/drivers/hid/amd-sfh-hid/Kconfig b/drivers/hid/amd-sfh-hid/Kconfig
new file mode 100644
index 000000000000..e73cf9fe1324
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+menu "AMD SFH HID support"
+ depends on X86_64 || COMPILE_TEST
+ depends on PCI
+
+config AMD_SFH_HID
+ tristate "AMD Sensor Fusion Hub"
+ select HID
+ help
+ If you say yes to this option, support will be included for the AMD
+ Sensor Fusion Hub.
+ This driver will enable sensors functionality to user through HID
+ framework. Basically this driver will get data from MP2 FW
+ and provide that data to HID framework.
+ MP2 which is an ARM® Cortex-M4 core based co-processor to x86.
+
+ This driver can also be built as modules. If so, the modules will
+ be called amd-sfhtp-hid.
+ Say Y or M here if you want to support AMD SFH. If unsure, say N.
+
+endmenu
diff --git a/drivers/hid/amd-sfh-hid/Makefile b/drivers/hid/amd-sfh-hid/Makefile
new file mode 100644
index 000000000000..a163c7f62b32
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Makefile - AMD SFH HID drivers
+# Copyright (c) 2019-2020, Advanced Micro Devices, Inc.
+#
+#
+
+ccflags-m := -Werror
+ obj-$(CONFIG_AMD_SFH_HID) +=amd-sfhtp-hid.o
+ amd-sfhtp-hid-objs := amdsfh_hid.o
+ amd-sfhtp-hid-objs+= amdsfh_hid_client.o
+ amd-sfhtp-hid-objs+= amd_mp2_pcie.o
+ amd-sfhtp-hid-objs+= hid_descriptor/amd_sfh_hid_descriptor.o
+
+ccflags-y += -I$(srctree)/$(src)/
diff --git a/drivers/hid/amd-sfh-hid/amd_mp2_pcie.c b/drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
new file mode 100644
index 000000000000..cdd480c287db
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AMD MP2 PCIe communication driver
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ *
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include "amd_mp2_pcie.h"
+
+#define DRIVER_NAME "pcie_mp2_amd"
+#define DRIVER_DESC "AMD(R) PCIe MP2 Communication Driver"
+
+#define ACEL_EN BIT(accel_idx)
+#define GYRO_EN BIT(gyro_idx)
+#define MAGNO_EN BIT(mag_idx)
+#define ALS_EN BIT(als_idx)
+
+void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info)
+{
+ union sfh_cmd_param cmd_param;
+ union sfh_cmd_base cmd_base;
+
+ /* fill up command register */
+ cmd_base.ul = 0;
+ cmd_base.s.cmd_id = enable_sensor;
+ cmd_base.s.period = info.period;
+ cmd_base.s.sensor_id = info.sensor_idx;
+
+ /* fill up command param register */
+ cmd_param.ul = 0;
+ cmd_param.s.buf_layout = 1;
+ cmd_param.s.buf_length = 16;
+
+ writeq(info.phys_address, privdata->mmio + AMD_C2P_MSG2);
+ writel(cmd_param.ul, privdata->mmio + AMD_C2P_MSG1);
+ writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG0);
+}
+
+void amd_stop_sensor(struct amd_mp2_dev *privdata, u16 sensor_idx)
+{
+ union sfh_cmd_base cmd_base;
+
+ /* fill up command register */
+ cmd_base.ul = 0;
+ cmd_base.s.cmd_id = disable_sensor;
+ cmd_base.s.period = 0;
+ cmd_base.s.sensor_id = sensor_idx;
+
+ writeq(0x0, privdata->mmio + AMD_C2P_MSG2);
+ writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG0);
+}
+
+void amd_stop_all_sensors(struct amd_mp2_dev *privdata)
+{
+ union sfh_cmd_base cmd_base;
+
+ /* fill up command register */
+ cmd_base.ul = 0;
+ cmd_base.s.cmd_id = stop_all_sensors;
+ cmd_base.s.period = 0;
+ cmd_base.s.sensor_id = 0;
+
+ writel(cmd_base.ul, privdata->mmio + AMD_C2P_MSG0);
+}
+
+int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id)
+{
+ int activestatus, num_of_sensors = 0;
+
+ if (!sensor_id)
+ return -EINVAL;
+
+ privdata->activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
+ activestatus = privdata->activecontrolstatus >> 4;
+ if (ACEL_EN & activestatus)
+ sensor_id[num_of_sensors++] = accel_idx;
+
+ if (GYRO_EN & activestatus)
+ sensor_id[num_of_sensors++] = gyro_idx;
+
+ if (MAGNO_EN & activestatus)
+ sensor_id[num_of_sensors++] = mag_idx;
+
+ if (ALS_EN & activestatus)
+ sensor_id[num_of_sensors++] = als_idx;
+
+ return num_of_sensors;
+}
+
+static int amd_mp2_pci_init(struct amd_mp2_dev *privdata, struct pci_dev *pdev)
+{
+ int rc;
+
+ pci_set_drvdata(pdev, privdata);
+ pcim_enable_device(pdev);
+ pcim_iomap_regions(pdev, BIT(2), DRIVER_NAME);
+
+ privdata->mmio = pcim_iomap_table(pdev)[2];
+ pci_set_master(pdev);
+
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc)
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ return rc;
+}
+
+static int amd_mp2_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct amd_mp2_dev *privdata;
+ int rc;
+
+ privdata = devm_kzalloc(&pdev->dev, sizeof(*privdata), GFP_KERNEL);
+ if (!privdata)
+ return -ENOMEM;
+ privdata->pdev = pdev;
+ rc = amd_mp2_pci_init(privdata, pdev);
+ if (rc)
+ return rc;
+ rc = amd_sfh_hid_client_init(privdata);
+ if (rc)
+ return rc;
+ return 0;
+}
+
+static void amd_mp2_pci_remove(struct pci_dev *pdev)
+{
+ struct amd_mp2_dev *privdata = pci_get_drvdata(pdev);
+
+ amd_sfh_hid_client_deinit(privdata);
+ amd_stop_all_sensors(privdata);
+}
+
+static const struct pci_device_id amd_mp2_pci_tbl[] = {
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_MP2) },
+ {},
+};
+MODULE_DEVICE_TABLE(pci, amd_mp2_pci_tbl);
+
+static struct pci_driver amd_mp2_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = amd_mp2_pci_tbl,
+ .probe = amd_mp2_pci_probe,
+ .remove = amd_mp2_pci_remove,
+};
+module_pci_driver(amd_mp2_pci_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Shyam Sundar S K <Shyam-sundar.S-k@amd.com>");
+MODULE_AUTHOR("Sandeep Singh <Sandeep.singh@amd.com>");
diff --git a/drivers/hid/amd-sfh-hid/amd_mp2_pcie.h b/drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
new file mode 100644
index 000000000000..a4ef604c4fe8
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * AMD MP2 PCIe communication driver
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#ifndef PCIE_MP2_AMD_H
+#define PCIE_MP2_AMD_H
+
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#define PCI_DEVICE_ID_AMD_MP2 0x15E4
+
+/* MP2 C2P Message Registers */
+#define AMD_C2P_MSG0 0x10500
+#define AMD_C2P_MSG1 0x10504
+#define AMD_C2P_MSG2 0x10508
+
+/* MP2 P2C Message Registers */
+#define AMD_P2C_MSG3 0x1068C /* Supported Sensors info */
+
+/* SFH Command register */
+union sfh_cmd_base {
+ u32 ul;
+ struct {
+ u32 cmd_id : 8;
+ u32 sensor_id : 8;
+ u32 period : 16;
+ } s;
+};
+
+union sfh_cmd_param {
+ u32 ul;
+ struct {
+ u32 buf_layout : 2;
+ u32 buf_length : 6;
+ u32 rsvd : 24;
+ } s;
+};
+
+struct sfh_cmd_reg {
+ union sfh_cmd_base cmd_base;
+ union sfh_cmd_param cmd_param;
+ phys_addr_t phys_addr;
+};
+
+enum command_id {
+ enable_sensor = 1,
+ disable_sensor = 2,
+ stop_all_sensors = 8,
+ invalid_cmd = 0xf
+};
+
+enum sensor_idx {
+ accel_idx = 0,
+ gyro_idx = 1,
+ mag_idx = 2,
+ als_idx = 19
+};
+
+struct amd_mp2_dev {
+ struct pci_dev *pdev;
+ struct amdtp_cl_data *cl_data;
+ void __iomem *mmio;
+ u32 activecontrolstatus;
+};
+
+struct amd_mp2_sensor_info {
+ u8 sensor_idx;
+ u32 period;
+ phys_addr_t phys_address;
+};
+
+void amd_start_sensor(struct amd_mp2_dev *privdata, struct amd_mp2_sensor_info info);
+void amd_stop_sensor(struct amd_mp2_dev *privdata, u16 sensor_idx);
+void amd_stop_all_sensors(struct amd_mp2_dev *privdata);
+int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id);
+int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata);
+int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata);
+#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 3/4] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH)
2020-08-09 10:25 [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
@ 2020-08-09 10:25 ` Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion " Sandeep Singh
3 siblings, 0 replies; 9+ messages in thread
From: Sandeep Singh @ 2020-08-09 10:25 UTC (permalink / raw)
To: jikos, benjamin.tissoires, linux-kernel, linux-input,
srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k, Sandeep Singh
From: Sandeep Singh <sandeep.singh@amd.com>
This part of module will provide the interaction between HID framework
and client layer.This modules will registered client layer with
HID framework.
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
---
drivers/hid/amd-sfh-hid/amdsfh_hid.c | 175 ++++++++++++++++
drivers/hid/amd-sfh-hid/amdsfh_hid.h | 68 ++++++
drivers/hid/amd-sfh-hid/amdsfh_hid_client.c | 220 ++++++++++++++++++++
3 files changed, 463 insertions(+)
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid.c
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid.h
create mode 100644 drivers/hid/amd-sfh-hid/amdsfh_hid_client.c
diff --git a/drivers/hid/amd-sfh-hid/amdsfh_hid.c b/drivers/hid/amd-sfh-hid/amdsfh_hid.c
new file mode 100644
index 000000000000..645c41174bca
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amdsfh_hid.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AMD MP2 Sensors transport driver
+ *
+ * Authors: Nehal Bakulchandra Shah <Nehal-bakulchandra.shah@amd.com>
+ * Sandeep Singh <sandeep.singh@amd.com>
+ */
+#include <linux/hid.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include "amdsfh_hid.h"
+
+#define DRIVER_NAME "AMD_MP2_SENSORS_TRANSPORT"
+
+/*
+ * amdtp_hid_parse() - hid-core .parse() callback
+ * @hid: hid device instance
+ *
+ * This function gets called during call to hid_add_device
+ *
+ * Return: 0 on success and non zero on error
+ */
+static int amdtp_hid_parse(struct hid_device *hid)
+{
+ struct amdtp_hid_data *hid_data = hid->driver_data;
+ struct amdtp_cl_data *cli_data = hid_data->cli_data;
+
+ return hid_parse_report(hid, cli_data->report_descr[hid_data->index],
+ cli_data->report_descr_sz[hid_data->index]);
+}
+
+/* Empty callbacks with success return code */
+static int amdtp_hid_start(struct hid_device *hid)
+{
+ return 0;
+}
+
+static void amdtp_hid_stop(struct hid_device *hid)
+{
+}
+
+static int amdtp_hid_open(struct hid_device *hid)
+{
+ return 0;
+}
+
+static void amdtp_hid_close(struct hid_device *hid)
+{
+}
+
+static int amdtp_raw_request(struct hid_device *hdev, u8 reportnum,
+ u8 *buf, size_t len, u8 rtype, int reqtype)
+{
+ return 0;
+}
+
+static void amdtp_hid_request(struct hid_device *hid, struct hid_report *rep, int reqtype)
+{
+ int rc;
+
+ switch (reqtype) {
+ case HID_REQ_GET_REPORT:
+ rc = amd_sfh_get_report(hid, rep->id, rep->type);
+ if (rc)
+ pr_err("AMDSFH get report error ");
+ break;
+ case HID_REQ_SET_REPORT:
+ amd_sfh_set_report(hid, rep->id, reqtype);
+ break;
+ default:
+ break;
+ }
+}
+
+static int amdtp_wait_for_response(struct hid_device *hid)
+{
+ struct amdtp_hid_data *hid_data = hid->driver_data;
+ struct amdtp_cl_data *cli_data = hid_data->cli_data;
+ int i, ret = 0;
+
+ for (i = 0; i < cli_data->num_hid_devices; i++) {
+ if (cli_data->hid_sensor_hubs[i] == hid)
+ break;
+ }
+
+ if (!cli_data->request_done[i])
+ ret = wait_event_interruptible_timeout(hid_data->hid_wait,
+ cli_data->request_done[i], 1500);
+ if (ret > 0)
+ return 0;
+ else if (ret == -ERESTARTSYS)
+ return -ERESTARTSYS;
+ else
+ return -ETIMEDOUT;
+}
+
+void amdtp_hid_wakeup(struct hid_device *hid)
+{
+ struct amdtp_hid_data *hid_data = hid->driver_data;
+ struct amdtp_cl_data *cli_data = hid_data->cli_data;
+
+ cli_data->request_done[cli_data->cur_hid_dev] = true;
+ wake_up_interruptible(&hid_data->hid_wait);
+}
+
+static struct hid_ll_driver amdtp_hid_ll_driver = {
+ .parse = amdtp_hid_parse,
+ .start = amdtp_hid_start,
+ .stop = amdtp_hid_stop,
+ .open = amdtp_hid_open,
+ .close = amdtp_hid_close,
+ .request = amdtp_hid_request,
+ .wait = amdtp_wait_for_response,
+ .raw_request = amdtp_raw_request,
+};
+
+int amdtp_hid_probe(u32 cur_hid_dev,
+ struct amdtp_cl_data *cli_data)
+{
+ struct hid_device *hid;
+ struct amdtp_hid_data *hid_data;
+ int rc;
+
+ hid = hid_allocate_device();
+ if (IS_ERR(hid)) {
+ rc = PTR_ERR(hid);
+ return rc;
+ }
+
+ hid_data = kzalloc(sizeof(*hid_data), GFP_KERNEL);
+ if (!hid_data) {
+ rc = -ENOMEM;
+ goto err_hid_data;
+ }
+
+ hid->ll_driver = &amdtp_hid_ll_driver;
+ hid_data->index = cur_hid_dev;
+ hid_data->cli_data = cli_data;
+ init_waitqueue_head(&hid_data->hid_wait);
+
+ hid->driver_data = hid_data;
+ cli_data->hid_sensor_hubs[cur_hid_dev] = hid;
+ hid->bus = BUS_AMD_AMDTP;
+ hid->vendor = AMD_SFH_HID_VENDOR;
+ hid->product = AMD_SFH_HID_PRODUCT;
+ snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X", "hid-amdtp",
+ hid->vendor, hid->product);
+
+ rc = hid_add_device(hid);
+ if (rc)
+ goto err_hid_device;
+ return 0;
+
+err_hid_device:
+ kfree(hid_data);
+err_hid_data:
+ hid_destroy_device(hid);
+ return rc;
+}
+
+void amdtp_hid_remove(struct amdtp_cl_data *cli_data)
+{
+ int i;
+
+ for (i = 0; i < cli_data->num_hid_devices; ++i) {
+ kfree(cli_data->feature_report[i]);
+ kfree(cli_data->input_report[i]);
+ kfree(cli_data->report_descr[i]);
+ if (cli_data->hid_sensor_hubs[i]) {
+ kfree(cli_data->hid_sensor_hubs[i]->driver_data);
+ hid_destroy_device(cli_data->hid_sensor_hubs[i]);
+ cli_data->hid_sensor_hubs[i] = NULL;
+ }
+ }
+}
diff --git a/drivers/hid/amd-sfh-hid/amdsfh_hid.h b/drivers/hid/amd-sfh-hid/amdsfh_hid.h
new file mode 100644
index 000000000000..b4b14b46f2e1
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amdsfh_hid.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * AMD MP2 Sensors transport driver
+ *
+ * Authors: Nehal Bakulchandra Shah <Nehal-bakulchandra.shah@amd.com>
+ * Sandeep Singh <sandeep.singh@amd.com>
+ */
+
+#ifndef AMDSFH_HID_H
+#define AMDSFH_HID_H
+
+#define MAX_HID_DEVICES 4
+#define DCD_DATA_SIZE_CHAR 512
+#define BUS_AMD_AMDTP 0x20
+#define AMD_SFH_HID_VENDOR 1022
+#define AMD_SFH_HID_PRODUCT 0x0001
+
+struct amdtp_cl_data {
+ u8 init_done;
+ u32 cur_hid_dev;
+ u32 hid_dev_count;
+ u32 num_hid_devices;
+ struct device_info *hid_devices;
+ u8 *report_descr[MAX_HID_DEVICES];
+ int report_descr_sz[MAX_HID_DEVICES];
+ struct hid_device *hid_sensor_hubs[MAX_HID_DEVICES];
+ u8 *hid_descr[MAX_HID_DEVICES];
+ int hid_descr_size[MAX_HID_DEVICES];
+ phys_addr_t phys_addr_base;
+ u32 *sensor_virt_addr[MAX_HID_DEVICES];
+ phys_addr_t sensor_phys_addr[MAX_HID_DEVICES];
+ u32 sensor_sts[MAX_HID_DEVICES];
+ u32 sensor_requested_cnt[MAX_HID_DEVICES];
+ u8 report_type[MAX_HID_DEVICES];
+ u8 report_id[MAX_HID_DEVICES];
+ u8 sensor_idx[MAX_HID_DEVICES];
+ u8 *feature_report[MAX_HID_DEVICES];
+ u8 *input_report[MAX_HID_DEVICES];
+ u8 request_done[MAX_HID_DEVICES];
+ struct delayed_work work;
+ struct delayed_work work_buffer;
+};
+
+/**
+ * struct amdtp_hid_data - Per instance HID data
+ * @index: Device index in the order of enumeration
+ * @request_done: Get Feature/Input report complete flag
+ * used during get/set request from hid core
+ * @cli_data: Link to the client instance
+ * @hid_wait: Completion waitq
+ *
+ * Used to tie hid hid->driver data to driver client instance
+ */
+struct amdtp_hid_data {
+ int index;
+ struct amdtp_cl_data *cli_data;
+ wait_queue_head_t hid_wait;
+};
+
+/* Interface functions between HID LL driver and AMD SFH client */
+void hid_amdtp_set_feature(struct hid_device *hid, char *buf, u32 len, int report_id);
+void hid_amdtp_get_report(struct hid_device *hid, int report_id, int report_type);
+int amdtp_hid_probe(u32 cur_hid_dev, struct amdtp_cl_data *cli_data);
+void amdtp_hid_remove(struct amdtp_cl_data *cli_data);
+int amd_sfh_get_report(struct hid_device *hid, int report_id, int report_type);
+void amd_sfh_set_report(struct hid_device *hid, int report_id, int report_type);
+void amdtp_hid_wakeup(struct hid_device *hid);
+#endif
diff --git a/drivers/hid/amd-sfh-hid/amdsfh_hid_client.c b/drivers/hid/amd-sfh-hid/amdsfh_hid_client.c
new file mode 100644
index 000000000000..476fa26a1e62
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/amdsfh_hid_client.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AMD SFH Client Layer
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Nehal Bakulchandra Shah <Nehal-Bakulchandra.Shah@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/hid.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <uapi/asm-generic/errno-base.h>
+#include "hid_descriptor/amd_sfh_hid_descriptor.h"
+#include "amdsfh_hid.h"
+#include "amd_mp2_pcie.h"
+
+#define PERIOD 200
+
+struct request_list {
+ struct hid_device *hid;
+ struct list_head list;
+ u8 report_id;
+ u8 sensor_idx;
+ u8 report_type;
+ u8 current_index;
+};
+
+static struct request_list req_list;
+
+void amd_sfh_set_report(struct hid_device *hid, int report_id,
+ int report_type)
+{
+ struct amdtp_hid_data *hid_data = hid->driver_data;
+ struct amdtp_cl_data *cli_data = hid_data->cli_data;
+ int i;
+
+ for (i = 0; i < cli_data->num_hid_devices; i++) {
+ if (cli_data->hid_sensor_hubs[i] == hid) {
+ cli_data->cur_hid_dev = i;
+ break;
+ }
+ }
+ amdtp_hid_wakeup(hid);
+}
+
+int amd_sfh_get_report(struct hid_device *hid, int report_id, int report_type)
+{
+ struct amdtp_hid_data *hid_data = hid->driver_data;
+ struct amdtp_cl_data *cli_data = hid_data->cli_data;
+ int i;
+
+ for (i = 0; i < cli_data->num_hid_devices; i++) {
+ if (cli_data->hid_sensor_hubs[i] == hid) {
+ struct request_list *new = kzalloc(sizeof(*new), GFP_KERNEL);
+
+ if (!new)
+ return -ENOMEM;
+ new->current_index = i;
+ new->sensor_idx = cli_data->sensor_idx[i];
+ new->hid = hid;
+ new->report_type = report_type;
+ new->report_id = report_id;
+ cli_data->report_id[i] = report_id;
+ cli_data->request_done[i] = false;
+ list_add(&new->list, &req_list.list);
+ break;
+ }
+ }
+ schedule_delayed_work(&cli_data->work, 0);
+ return 0;
+}
+
+static void amd_sfh_work(struct work_struct *work)
+{
+ struct amdtp_cl_data *cli_data = container_of(work, struct amdtp_cl_data, work.work);
+ struct request_list *req_node;
+ u8 current_index, sensor_index;
+ u8 report_id, node_type;
+ u8 report_size = 0;
+
+ req_node = list_last_entry(&req_list.list, struct request_list, list);
+ list_del(&req_node->list);
+ current_index = req_node->current_index;
+ sensor_index = req_node->sensor_idx;
+ report_id = req_node->report_id;
+ node_type = req_node->report_type;
+
+ if (node_type == HID_FEATURE_REPORT) {
+ report_size = get_feature_report(sensor_index, report_id,
+ cli_data->feature_report[current_index]);
+ if (report_size)
+ hid_input_report(cli_data->hid_sensor_hubs[current_index],
+ cli_data->report_type[current_index],
+ cli_data->feature_report[current_index], report_size, 0);
+ else
+ pr_err("AMDSFH: Invalid report size\n");
+
+ } else if (node_type == HID_INPUT_REPORT) {
+ report_size = get_input_report(sensor_index, report_id,
+ cli_data->input_report[current_index],
+ cli_data->sensor_virt_addr[current_index]);
+ if (report_size)
+ hid_input_report(cli_data->hid_sensor_hubs[current_index],
+ cli_data->report_type[current_index],
+ cli_data->input_report[current_index], report_size, 0);
+ else
+ pr_err("AMDSFH: Invalid report size\n");
+ }
+ cli_data->cur_hid_dev = current_index;
+ cli_data->sensor_requested_cnt[current_index] = 0;
+ amdtp_hid_wakeup(cli_data->hid_sensor_hubs[current_index]);
+}
+
+static void amd_sfh_work_buffer(struct work_struct *work)
+{
+ struct amdtp_cl_data *cli_data = container_of(work, struct amdtp_cl_data, work_buffer.work);
+ u8 report_size;
+ int i;
+
+ for (i = 0; i < cli_data->num_hid_devices; i++) {
+ report_size = get_input_report(cli_data->sensor_idx[i], cli_data->report_id[i],
+ cli_data->input_report[i],
+ cli_data->sensor_virt_addr[i]);
+ hid_input_report(cli_data->hid_sensor_hubs[i], HID_INPUT_REPORT,
+ cli_data->input_report[i], report_size, 0);
+ }
+ schedule_delayed_work(&cli_data->work_buffer, PERIOD);
+}
+
+int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
+{
+ struct amdtp_cl_data *cl_data = privdata->cl_data;
+ struct amd_mp2_sensor_info info;
+ struct device *dev;
+ u32 feature_report_size;
+ u32 input_report_size;
+ u8 cl_idx;
+ int rc, i;
+
+ dev = &privdata->pdev->dev;
+ cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL);
+ if (!cl_data)
+ return -ENOMEM;
+
+ cl_data->num_hid_devices = amd_mp2_get_sensor_num(privdata, &cl_data->sensor_idx[0]);
+
+ INIT_DELAYED_WORK(&cl_data->work, amd_sfh_work);
+ INIT_DELAYED_WORK(&cl_data->work_buffer, amd_sfh_work_buffer);
+ INIT_LIST_HEAD(&req_list.list);
+
+ for (i = 0; i < cl_data->num_hid_devices; i++) {
+ cl_data->sensor_virt_addr[i] = dma_alloc_coherent(dev, sizeof(int) * 8,
+ &cl_data->sensor_phys_addr[i],
+ GFP_KERNEL);
+ cl_data->sensor_sts[i] = 0;
+ cl_data->sensor_requested_cnt[i] = 0;
+ cl_data->cur_hid_dev = i;
+ cl_idx = cl_data->sensor_idx[i];
+ cl_data->report_descr_sz[i] = get_descr_sz(cl_idx, descr_size);
+ if (!cl_data->report_descr_sz[i])
+ return -EINVAL;
+
+ feature_report_size = get_descr_sz(cl_idx, feature_size);
+ if (!feature_report_size)
+ return -EINVAL;
+
+ input_report_size = get_descr_sz(cl_idx, input_size);
+ if (!input_report_size)
+ return -EINVAL;
+
+ cl_data->feature_report[i] = kzalloc(feature_report_size, GFP_KERNEL);
+ if (!cl_data->feature_report[i])
+ return -ENOMEM;
+
+ cl_data->input_report[i] = kzalloc(input_report_size, GFP_KERNEL);
+ if (!cl_data->input_report[i])
+ return -ENOMEM;
+
+ info.period = PERIOD;
+ info.sensor_idx = cl_idx;
+ info.phys_address = cl_data->sensor_phys_addr[i];
+
+ cl_data->report_descr[i] = kzalloc(cl_data->report_descr_sz[i], GFP_KERNEL);
+ if (!cl_data->report_descr[i])
+ return -ENOMEM;
+
+ rc = get_report_descriptor(cl_idx, cl_data->report_descr[i]);
+ rc = amdtp_hid_probe(cl_data->cur_hid_dev, cl_data);
+ amd_start_sensor(privdata, info);
+ cl_data->sensor_sts[i] = 1;
+ }
+ privdata->cl_data = cl_data;
+ schedule_delayed_work(&cl_data->work_buffer, PERIOD);
+ return 0;
+}
+
+int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata)
+{
+ struct amdtp_cl_data *cl_data = privdata->cl_data;
+ int i;
+
+ for (i = 0; i < cl_data->num_hid_devices; i++)
+ amd_stop_sensor(privdata, i);
+
+ cancel_delayed_work_sync(&cl_data->work);
+ cancel_delayed_work_sync(&cl_data->work_buffer);
+ amdtp_hid_remove(cl_data);
+
+ for (i = 0; i < cl_data->num_hid_devices; i++) {
+ if (cl_data->sensor_virt_addr[i]) {
+ dma_free_coherent(&privdata->pdev->dev, 8 * sizeof(int),
+ cl_data->sensor_virt_addr[i],
+ cl_data->sensor_phys_addr[i]);
+ }
+ }
+ kfree(cl_data);
+ return 0;
+}
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
2020-08-09 10:25 [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub Sandeep Singh
` (2 preceding siblings ...)
2020-08-09 10:25 ` [PATCH v6 3/4] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH) Sandeep Singh
@ 2020-08-09 10:25 ` Sandeep Singh
2020-08-09 12:12 ` kernel test robot
3 siblings, 1 reply; 9+ messages in thread
From: Sandeep Singh @ 2020-08-09 10:25 UTC (permalink / raw)
To: jikos, benjamin.tissoires, linux-kernel, linux-input,
srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k, Sandeep Singh
From: Sandeep Singh <sandeep.singh@amd.com>
This part of module will define the data into HID reports. Get data from
PCIe layer and populate that data into reports. HID core communication
between devices and HID core is mostly done via HID reports.
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
---
.../hid_descriptor/amd_sfh_hid_descriptor.c | 226 ++++++
.../hid_descriptor/amd_sfh_hid_descriptor.h | 121 ++++
.../amd_sfh_hid_report_descriptor.h | 645 ++++++++++++++++++
3 files changed, 992 insertions(+)
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h
create mode 100644 drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h
diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c
new file mode 100644
index 000000000000..dc87c0547874
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AMD SFH Report Descriptor generator logic
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Nehal Bakulchandra Shah <Nehal-Bakulchandra.Shah@amd.com>
+ * Sandeep Singh <sandeep.singh@amd.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include "amd_sfh_hid_descriptor.h"
+#include "amd_sfh_hid_report_descriptor.h"
+#include "amd_mp2_pcie.h"
+
+#define AMD_SFH_FW_MULTIPLIER (1000)
+#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x41
+#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x51
+#define HID_DEFAULT_REPORT_INTERVAL 0x50
+#define HID_DEFAULT_MIN_VALUE 0X7F
+#define HID_DEFAULT_MAX_VALUE 0x80
+#define HID_DEFAULT_SENSITIVITY 0x7F
+#define HID_USAGE_SENSOR_PROPERTY_CONNECTION_TYPE_PC_INTEGRATED_ENUM 0x01
+/* state enums */
+#define HID_USAGE_SENSOR_STATE_READY_ENUM 0x02
+#define HID_USAGE_SENSOR_STATE_INITIALIZING_ENUM 0x05
+#define HID_USAGE_SENSOR_EVENT_DATA_UPDATED_ENUM 0x04
+
+int get_report_descriptor(int sensor_idx, u8 *rep_desc)
+{
+ switch (sensor_idx) {
+ case accel_idx: /* accel */
+ memset(rep_desc, 0, sizeof(accel3_report_descriptor));
+ memcpy(rep_desc, accel3_report_descriptor,
+ sizeof(accel3_report_descriptor));
+ break;
+ case gyro_idx: /* gyro */
+ memset(rep_desc, 0, sizeof(gyro3_report_descriptor));
+ memcpy(rep_desc, gyro3_report_descriptor,
+ sizeof(gyro3_report_descriptor));
+ break;
+ case mag_idx: /* Magnetometer */
+ memset(rep_desc, 0, sizeof(comp3_report_descriptor));
+ memcpy(rep_desc, comp3_report_descriptor,
+ sizeof(comp3_report_descriptor));
+ break;
+ case als_idx: /* ambient light sensor */
+ memset(rep_desc, 0, sizeof(als_report_descriptor));
+ memcpy(rep_desc, als_report_descriptor,
+ sizeof(als_report_descriptor));
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+u32 get_descr_sz(int sensor_idx, int descriptor_name)
+{
+ switch (sensor_idx) {
+ case accel_idx:
+ switch (descriptor_name) {
+ case descr_size:
+ return sizeof(accel3_report_descriptor);
+ case input_size:
+ return sizeof(struct accel3_input_report);
+ case feature_size:
+ return sizeof(struct accel3_feature_report);
+ }
+ break;
+ case gyro_idx:
+ switch (descriptor_name) {
+ case descr_size:
+ return sizeof(gyro3_report_descriptor);
+ case input_size:
+ return sizeof(struct gyro_input_report);
+ case feature_size:
+ return sizeof(struct gyro_feature_report);
+ }
+ break;
+ case mag_idx:
+ switch (descriptor_name) {
+ case descr_size:
+ return sizeof(comp3_report_descriptor);
+ case input_size:
+ return sizeof(struct magno_input_report);
+ case feature_size:
+ return sizeof(struct magno_feature_report);
+ }
+ break;
+ case als_idx:
+ switch (descriptor_name) {
+ case descr_size:
+ return sizeof(als_report_descriptor);
+ case input_size:
+ return sizeof(struct als_input_report);
+ case feature_size:
+ return sizeof(struct als_feature_report);
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static void get_common_features(struct common_feature_property *common, int report_id)
+{
+ common->report_id = report_id;
+ common->connection_type = HID_USAGE_SENSOR_PROPERTY_CONNECTION_TYPE_PC_INTEGRATED_ENUM;
+ common->report_state = HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
+ common->power_state = HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
+ common->sensor_state = HID_USAGE_SENSOR_STATE_INITIALIZING_ENUM;
+ common->report_interval = HID_DEFAULT_REPORT_INTERVAL;
+}
+
+u8 get_feature_report(int sensor_idx, int report_id, u8 *feature_report)
+{
+ struct accel3_feature_report acc_feature;
+ struct gyro_feature_report gyro_feature;
+ struct magno_feature_report magno_feature;
+ struct als_feature_report als_feature;
+ u8 report_size = 0;
+
+ if (!feature_report)
+ return report_size;
+
+ switch (sensor_idx) {
+ case accel_idx: /* accel */
+ get_common_features(&acc_feature.common_property, report_id);
+ acc_feature.accel_change_sesnitivity = HID_DEFAULT_SENSITIVITY;
+ acc_feature.accel_sensitivity_min = HID_DEFAULT_MIN_VALUE;
+ acc_feature.accel_sensitivity_max = HID_DEFAULT_MAX_VALUE;
+ memcpy(feature_report, &acc_feature, sizeof(acc_feature));
+ report_size = sizeof(acc_feature);
+ break;
+ case gyro_idx: /* gyro */
+ get_common_features(&gyro_feature.common_property, report_id);
+ gyro_feature.gyro_change_sesnitivity = HID_DEFAULT_SENSITIVITY;
+ gyro_feature.gyro_sensitivity_min = HID_DEFAULT_MIN_VALUE;
+ gyro_feature.gyro_sensitivity_max = HID_DEFAULT_MAX_VALUE;
+ memcpy(feature_report, &gyro_feature, sizeof(gyro_feature));
+ report_size = sizeof(gyro_feature);
+ break;
+ case mag_idx: /* Magnetometer */
+ get_common_features(&magno_feature.common_property, report_id);
+ magno_feature.magno_headingchange_sensitivity = HID_DEFAULT_SENSITIVITY;
+ magno_feature.heading_min = HID_DEFAULT_MIN_VALUE;
+ magno_feature.heading_max = HID_DEFAULT_MAX_VALUE;
+ magno_feature.flux_change_sensitivity = HID_DEFAULT_MIN_VALUE;
+ magno_feature.flux_min = HID_DEFAULT_MIN_VALUE;
+ magno_feature.flux_max = HID_DEFAULT_MAX_VALUE;
+ memcpy(feature_report, &magno_feature, sizeof(magno_feature));
+ report_size = sizeof(magno_feature);
+ break;
+ case als_idx: /* ambient light sensor */
+ get_common_features(&als_feature.common_property, report_id);
+ als_feature.als_change_sesnitivity = HID_DEFAULT_SENSITIVITY;
+ als_feature.als_sensitivity_min = HID_DEFAULT_MIN_VALUE;
+ als_feature.als_sensitivity_max = HID_DEFAULT_MAX_VALUE;
+ memcpy(feature_report, &als_feature, sizeof(als_feature));
+ report_size = sizeof(als_feature);
+ break;
+ default:
+ break;
+ }
+ return report_size;
+}
+
+static void get_common_inputs(struct common_input_property *common, int report_id)
+{
+ common->report_id = report_id;
+ common->sensor_state = HID_USAGE_SENSOR_STATE_READY_ENUM;
+ common->event_type = HID_USAGE_SENSOR_EVENT_DATA_UPDATED_ENUM;
+}
+
+u8 get_input_report(int sensor_idx, int report_id, u8 *input_report, u32 *sensor_virt_addr)
+{
+ struct accel3_input_report acc_input;
+ struct gyro_input_report gyro_input;
+ struct magno_input_report magno_input;
+ struct als_input_report als_input;
+ u8 report_size = 0;
+
+ if (!sensor_virt_addr || !input_report)
+ return report_size;
+
+ switch (sensor_idx) {
+ case accel_idx: /* accel */
+ get_common_inputs(&acc_input.common_property, report_id);
+ acc_input.in_accel_x_value = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER;
+ acc_input.in_accel_y_value = (int)sensor_virt_addr[1] / AMD_SFH_FW_MULTIPLIER;
+ acc_input.in_accel_z_value = (int)sensor_virt_addr[2] / AMD_SFH_FW_MULTIPLIER;
+ memcpy(input_report, &acc_input, sizeof(acc_input));
+ report_size = sizeof(acc_input);
+ break;
+ case gyro_idx: /* gyro */
+ get_common_inputs(&gyro_input.common_property, report_id);
+ gyro_input.in_angel_x_value = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER;
+ gyro_input.in_angel_y_value = (int)sensor_virt_addr[1] / AMD_SFH_FW_MULTIPLIER;
+ gyro_input.in_angel_z_value = (int)sensor_virt_addr[2] / AMD_SFH_FW_MULTIPLIER;
+ memcpy(input_report, &gyro_input, sizeof(gyro_input));
+ report_size = sizeof(gyro_input);
+ break;
+ case mag_idx: /* Magnetometer */
+ get_common_inputs(&magno_input.common_property, report_id);
+ magno_input.in_magno_x = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER;
+ magno_input.in_magno_y = (int)sensor_virt_addr[1] / AMD_SFH_FW_MULTIPLIER;
+ magno_input.in_magno_z = (int)sensor_virt_addr[2] / AMD_SFH_FW_MULTIPLIER;
+ magno_input.in_magno_accuracy = (u16)sensor_virt_addr[3] / AMD_SFH_FW_MULTIPLIER;
+ memcpy(input_report, &magno_input, sizeof(magno_input));
+ report_size = sizeof(magno_input);
+ break;
+
+ case als_idx: /* Als */
+ get_common_inputs(&als_input.common_property, report_id);
+ als_input.illuminance_value = (int)sensor_virt_addr[0] / AMD_SFH_FW_MULTIPLIER;
+ report_size = sizeof(als_input);
+ memcpy(input_report, &als_input, sizeof(als_input));
+ break;
+
+ default:
+ break;
+ }
+ return report_size;
+}
diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h
new file mode 100644
index 000000000000..823cecbca046
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_descriptor.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * HID report descriptors, structures and routines
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Nehal Bakulchandra Shah <Nehal-bakulchandra.shah@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#ifndef AMD_SFH_HID_DESCRIPTOR_H
+#define AMD_SFH_HID_DESCRIPTOR_H
+
+enum desc_type {
+ /* Report descriptor name */
+ descr_size = 1,
+ input_size,
+ feature_size,
+};
+
+struct _hid_report_descriptor {
+ u8 bDescriptorType;
+ u8 wDescriptorLength;
+};
+
+struct common_feature_property {
+ /* common properties */
+ u8 report_id;
+ u8 connection_type;
+ u8 report_state;
+ u8 power_state;
+ u8 sensor_state;
+ u32 report_interval;
+} __packed;
+
+struct common_input_property {
+ /* common properties */
+ u8 report_id;
+ u8 sensor_state;
+ u8 event_type;
+} __packed;
+
+struct _hid_device_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ u8 bcdHID[2];
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ struct _hid_report_descriptor *reports;
+};
+
+struct accel3_feature_report {
+ struct common_feature_property common_property;
+ /* properties specific to this sensor */
+ u16 accel_change_sesnitivity;
+ s16 accel_sensitivity_max;
+ s16 accel_sensitivity_min;
+} __packed;
+
+struct accel3_input_report {
+ struct common_input_property common_property;
+ /* values specific to this sensor */
+ int in_accel_x_value;
+ int in_accel_y_value;
+ int in_accel_z_value;
+ /* include if required to support the "shake" event */
+ u8 in_accel_shake_detection;
+} __packed;
+
+struct gyro_feature_report {
+ struct common_feature_property common_property;
+ /* properties specific to this sensor */
+ u16 gyro_change_sesnitivity;
+ s16 gyro_sensitivity_max;
+ s16 gyro_sensitivity_min;
+} __packed;
+
+struct gyro_input_report {
+ struct common_input_property common_property;
+ /* values specific to this sensor */
+ int in_angel_x_value;
+ int in_angel_y_value;
+ int in_angel_z_value;
+} __packed;
+
+struct magno_feature_report {
+ struct common_feature_property common_property;
+ /*properties specific to this sensor */
+ u16 magno_headingchange_sensitivity;
+ s16 heading_min;
+ s16 heading_max;
+ u16 flux_change_sensitivity;
+ s16 flux_min;
+ s16 flux_max;
+} __packed;
+
+struct magno_input_report {
+ struct common_input_property common_property;
+ int in_magno_x;
+ int in_magno_y;
+ int in_magno_z;
+ int in_magno_accuracy;
+} __packed;
+
+struct als_feature_report {
+ struct common_feature_property common_property;
+ /* properties specific to this sensor */
+ u16 als_change_sesnitivity;
+ s16 als_sensitivity_max;
+ s16 als_sensitivity_min;
+} __packed;
+
+struct als_input_report {
+ struct common_input_property common_property;
+ /* values specific to this sensor */
+ int illuminance_value;
+} __packed;
+
+int get_report_descriptor(int sensor_idx, u8 rep_desc[]);
+u32 get_descr_sz(int sensor_idx, int descriptor_name);
+u8 get_feature_report(int sensor_idx, int report_id, u8 *feature_report);
+u8 get_input_report(int sensor_idx, int report_id, u8 *input_report, u32 *sensor_virt_addr);
+#endif
diff --git a/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h
new file mode 100644
index 000000000000..44271d39b322
--- /dev/null
+++ b/drivers/hid/amd-sfh-hid/hid_descriptor/amd_sfh_hid_report_descriptor.h
@@ -0,0 +1,645 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * HID descriptor stuructures
+ * Copyright 2020 Advanced Micro Devices, Inc.
+ * Authors: Nehal Bakulchandra Shah <Nehal-bakulchandra.shah@amd.com>
+ * Sandeep Singh <Sandeep.singh@amd.com>
+ */
+
+#ifndef AMD_SFH_HID_REPORT_DESCRIPTOR_H
+#define AMD_SFH_HID_REPORT_DESCRIPTOR_H
+
+// Accelerometer 3D Sensor
+static const u8 accel3_report_descriptor[] = {
+0x05, 0x20, /* Usage page */
+0x09, 0x73, /* Motion type Accel 3D */
+0xA1, 0x00, /* HID Collection (Physical) */
+
+//feature reports(xmit/receive)
+0x85, 1, /* HID Report ID */
+0x05, 0x20, /* HID usage page sensor */
+0x0A, 0x09, 0x03, /* Sensor property and sensor connection type */
+0x15, 0, /* HID logical MIN_8(0) */
+0x25, 2, /* HID logical MAX_8(2) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection (logical) */
+0x0A, 0x30, 0x08, /* Sensor property connection type intergated sel*/
+0x0A, 0x31, 0x08, /* Sensor property connection type attached sel */
+0x0A, 0x32, 0x08, /* Sensor property connection type external sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x16, 0x03, /* HID usage sensor property reporting state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x40, 0x08, /* Sensor property report state no events sel */
+0x0A, 0x41, 0x08, /* Sensor property report state all events sel */
+0x0A, 0x42, 0x08, /* Sensor property report state threshold events sel */
+0x0A, 0x43, 0x08, /* Sensor property report state no events wake sel */
+0x0A, 0x44, 0x08, /* Sensor property report state all events wake sel */
+0x0A, 0x45, 0x08, /* Sensor property report state threshold events wake sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x19, 0x03, /* HID usage sensor property power state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x50, 0x08, /* Sensor property power state undefined sel */
+0x0A, 0x51, 0x08, /* Sensor property power state D0 full power sel */
+0x0A, 0x52, 0x08, /* Sensor property power state D1 low power sel */
+0x0A, 0x53, 0x08, /* Sensor property power state D2 standby with wake sel */
+0x0A, 0x54, 0x08, /* Sensor property power state D3 sleep with wake sel */
+0x0A, 0x55, 0x08, /* Sensor property power state D4 power off sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x0E, 0x03, /* HID usage sensor property report interval */
+0x15, 0, /* HID logical Min_8(0) */
+0x27, 0xFF, 0xFF, 0xFF, 0xFF, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count(1) */
+0x55, 0, /* HID unit exponent(0) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x52, 0x14, /* Sensor data motion accel and mod change sensitivity ABS) */
+
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x52, 0x24, /* HID usage sensor data (motion accel and mod max) */
+
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x52, 0x34, /* HID usage sensor data (motion accel and mod min) */
+
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+
+//input report (transmit)
+0x05, 0x20, /* HID usage page sensors */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x02, 0x02, /* HID usage sensor event */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x10, 0x08, /* HID usage sensor event unknown sel */
+0x0A, 0x11, 0x08, /* HID usage sensor event state changed sel */
+0x0A, 0x12, 0x08, /* HID usage sensor event property changed sel */
+0x0A, 0x13, 0x08, /* HID usage sensor event data updated sel */
+0x0A, 0x14, 0x08, /* HID usage sensor event poll response sel */
+0x0A, 0x15, 0x08, /* HID usage sensor event change sensitivity sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x53, 0x04, /* HID usage sensor data motion Acceleration X axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0xFF, 0xff, 0XFF, 0XFF, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x54, 0x04, /* HID usage sensor data motion Acceleration Y axis */
+0x17, 0X00, 0X00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0xFF, 0xFF, 0XFF, 0XFF, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x55, 0x04, /* HID usage sensor data motion Acceleration Z axis */
+0x17, 0X00, 0X00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0XFF, 0XFF, 0xFF, 0x7F, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+
+0x0A, 0x51, 0x04, /* HID usage sensor data motion state */
+0x15, 0, /* HID logical Min_8(0) False = Still*/
+0x25, 1, /* HID logical Min_8(1) True = In motion */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0xC0 /* HID end collection */
+};
+
+const u8 gyro3_report_descriptor[] = {
+0x05, 0x20, /* Usage page */
+0x09, 0x76, /* Motion type Gyro3D */
+0xA1, 0x00, /* HID Collection (Physical) */
+
+0x85, 2, /* HID Report ID */
+0x05, 0x20, /* HID usage page sensor */
+0x0A, 0x09, 0x03, /* Sensor property and sensor connection type */
+0x15, 0, /* HID logical MIN_8(0) */
+0x25, 2, /* HID logical MAX_8(2) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection (logical) */
+0x0A, 0x30, 0x08, /* Sensor property connection type intergated sel */
+0x0A, 0x31, 0x08, /* Sensor property connection type attached sel */
+0x0A, 0x32, 0x08, /* Sensor property connection type external sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x16, 0x03, /* HID usage sensor property reporting state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x40, 0x08, /* Sensor reporting state no events sel */
+0x0A, 0x41, 0x08, /* Sensor reporting state all events sel */
+0x0A, 0x42, 0x08, /* Sensor reporting state threshold events sel */
+0x0A, 0x43, 0x08, /* Sensor reporting state no events wake sel */
+0x0A, 0x44, 0x08, /* Sensor reporting state all events wake sel */
+0x0A, 0x45, 0x08, /* Sensor reporting state threshold events wake sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x19, 0x03, /* HID usage sensor property power state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x50, 0x08, /* Sensor power state undefined sel */
+0x0A, 0x51, 0x08, /* Sensor power state D0 full power sel */
+0x0A, 0x52, 0x08, /* Sensor power state D1 low power sel */
+0x0A, 0x53, 0x08, /* Sensor power state D2 standby with wake sel */
+0x0A, 0x54, 0x08, /* Sensor power state D3 sleep with wake sel */
+0x0A, 0x55, 0x08, /* Sensor power state D4 power off sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x0E, 0x03, /* HID usage sensor property report interval */
+0x15, 0, /* HID logical Min_8(0) */
+0x27, 0xFF, 0xFF, 0xFF, 0xFF, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count(1) */
+0x55, 0, /* HID unit exponent(0) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x56, 0x14, /* Angular velocity and mod change sensitivity ABS)*/
+
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x56, 0x24, /* Sensor data (motion angular velocity and mod max) */
+
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x56, 0x34, /* HID usage sensor data (motion accel and mod min) */
+
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+
+//Input reports(transmit)
+0x05, 0x20, /* HID usage page sensors */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x02, 0x02, /* HID usage sensor event */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x10, 0x08, /* HID usage sensor event unknown sel */
+0x0A, 0x11, 0x08, /* HID usage sensor event state changed sel */
+0x0A, 0x12, 0x08, /* HID usage sensor event property changed sel */
+0x0A, 0x13, 0x08, /* HID usage sensor event data updated sel */
+0x0A, 0x14, 0x08, /* HID usage sensor event poll response sel */
+0x0A, 0x15, 0x08, /* HID usage sensor event change sensitivity sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x57, 0x04, /* Sensor data motion Angular velocity X axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x58, 0x04, /* Sensor data motion Angular velocity Y axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x59, 0x04, /* Sensor data motion Angular velocity Z axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+
+0xC0, /* HID end collection */
+};
+
+const u8 comp3_report_descriptor[] = {
+0x05, 0x20, /* Usage page */
+0x09, 0x83, /* Motion type Orientation compass 3D */
+0xA1, 0x00, /* HID Collection (Physical) */
+
+0x85, 3, /* HID Report ID */
+0x05, 0x20, /* HID usage page sensor */
+0x0A, 0x09, 0x03, /* Sensor property and sensor connection type */
+0x15, 0, /* HID logical MIN_8(0) */
+0x25, 2, /* HID logical MAX_8(2) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection (logical) */
+0x0A, 0x30, 0x08, /* Sensor property connection type intergated sel */
+0x0A, 0x31, 0x08, /* Sensor property connection type attached sel */
+0x0A, 0x32, 0x08, /* Sensor property connection type external sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x16, 0x03, /* HID usage sensor property reporting state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x40, 0x08, /* Sensor reporting state no events sel */
+0x0A, 0x41, 0x08, /* Sensor reporting state all events sel */
+0x0A, 0x42, 0x08, /* Sensor reporting state threshold events sel */
+0x0A, 0x43, 0x08, /* Sensor reporting state no events wake sel */
+0x0A, 0x44, 0x08, /* Sensor reporting state all events wake sel */
+0x0A, 0x45, 0x08, /* Sensor reporting state threshold events wake sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x19, 0x03, /* HID usage sensor property power state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x50, 0x08, /* Sensor power state undefined sel */
+0x0A, 0x51, 0x08, /* Sensor power state D0 full power sel */
+0x0A, 0x52, 0x08, /* Sensor power state D1 low power sel */
+0x0A, 0x53, 0x08, /* Sensor power state D2 standby with wake sel */
+0x0A, 0x54, 0x08, /* Sensor power state D3 sleep with wake sel */
+0x0A, 0x55, 0x08, /* Sensor power state D4 power off sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x0E, 0x03, /* HID usage sensor property report interval */
+0x15, 0, /* HID logical Min_8(0) */
+0x27, 0xFF, 0xFF, 0xFF, 0xFF, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count(1) */
+0x55, 0, /* HID unit exponent(0) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x71, 0x14, /* Orientation and mod change sensitivity ABS)*/
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x71, 0x24, /* Sensor data (motion orientation and mod max) */
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x71, 0x34, /* Sensor data (motion orientation and mod min) */
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x84, 0x14, /* Maganetic flux and change sensitivity ABS) */
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x84, 0x24, /* Maganetic flux and mod change sensitivity Max) */
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0x84, 0x34, /* Maganetic flux and mod change sensitivity Min */
+0x16, 0x01, 0x80, /* HID logical Min_16(0x01,0x80) */
+0x26, 0xFF, 0x7F, /* HID logical Max_16(0xFF,0x7F) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+
+//Input reports(transmit)
+0x05, 0x20, /* HID usage page sensors */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x02, 0x02, /* HID usage sensor event */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x10, 0x08, /* HID usage sensor event unknown sel */
+0x0A, 0x11, 0x08, /* HID usage sensor event state changed sel */
+0x0A, 0x12, 0x08, /* HID usage sensor event property changed sel */
+0x0A, 0x13, 0x08, /* HID usage sensor event data updated sel */
+0x0A, 0x14, 0x08, /* HID usage sensor event poll response sel */
+0x0A, 0x15, 0x08, /* HID usage sensor event change sensitivity sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x85, 0x04, /* Sensor data orientation magnetic flux X axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0D, /* HID unit exponent(0x0D) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x86, 0x04, /* Sensor data orientation magnetic flux Y axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0D, /* HID unit exponent(0x0D) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x87, 0x04, /* Sensor data orientation magnetic flux Z axis */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0x55, 0x0D, /* HID unit exponent(0x0D) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0x0A, 0x88, 0x04, /* Sensor data orientation magnetometer accuracy */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0xC0 /* HID end collection */
+};
+
+const u8 als_report_descriptor[] = {
+0x05, 0x20, /* HID usage page sensor */
+0x09, 0x41, /* HID usage sensor type Ambientlight */
+0xA1, 0x00, /* HID Collection (Physical) */
+
+//feature reports(xmit/receive)//
+0x85, 4, /* HID Report ID */
+0x05, 0x20, /* HID usage page sensor */
+0x0A, 0x09, 0x03, /* Sensor property and sensor connection type */
+0x15, 0, /* HID logical MIN_8(0) */
+0x25, 2, /* HID logical MAX_8(2) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection (logical) */
+0x0A, 0x30, 0x08, /* Sensor property connection type intergated sel */
+0x0A, 0x31, 0x08, /* Sensor property connection type attached sel */
+0x0A, 0x32, 0x08, /* Sensor property connection type external sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x16, 0x03, /* HID usage sensor property reporting state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x40, 0x08, /* Sensor reporting state no events sel */
+0x0A, 0x41, 0x08, /* Sensor reporting state all events sel */
+0x0A, 0x42, 0x08, /* Sensor reporting state threshold events sel */
+0x0A, 0x43, 0x08, /* Sensor reporting state no events wake sel */
+0x0A, 0x44, 0x08, /* Sensor reporting state all events wake sel */
+0x0A, 0x45, 0x08, /* Sensor reporting state threshold events wake sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x19, 0x03, /* HID usage sensor property power state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x50, 0x08, /* Sensor power state undefined sel */
+0x0A, 0x51, 0x08, /* Sensor power state D0 full power sel */
+0x0A, 0x52, 0x08, /* Sensor power state D1 low power sel */
+0x0A, 0x53, 0x08, /* Sensor power state D2 standby with wake sel */
+0x0A, 0x54, 0x08, /* Sensor power state D3 sleep with wake sel */
+0x0A, 0x55, 0x08, /* Sensor power state D4 power off sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count(1) */
+0xA1, 0x02, /* HID collection(logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0xB1, 0x00, /* HID feature (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x0E, 0x03, /* HID usage sensor property report interval */
+0x15, 0, /* HID logical Min_8(0) */
+0x27, 0xFF, 0xFF, 0xFF, 0xFF, /* HID logical Max_32 */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count(1) */
+0x55, 0, /* HID unit exponent(0) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0xD1, 0xE4, /* Light illuminance and sensitivity REL PCT) */
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0x10, 0x27, /* HID logical Max_16(0x10,0x27) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0E, /* HID unit exponent(0x0E) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0xD1, 0x24, /* Sensor data (Light illuminance and mod max) */
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+0x0A, 0xD1, 0x34, /* Sensor data (Light illuminance and mod min) */
+0x15, 0, /* HID logical Min_8(0) */
+0x26, 0xFF, 0xFF, /* HID logical Max_16(0xFF,0xFF) */
+0x75, 16, /* HID report size(16) */
+0x95, 1, /* HID report count(1) */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0xB1, 0x02, /* HID feature (Data_Arr_Abs) */
+
+//Input reports (transmit)
+0x05, 0x20, /* HID usage page sensors */
+0x0A, 0x01, 0x02, /* HID usage sensor state */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 6, /* HID logical Max_8(6) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x00, 0x08, /* HID usage sensor state unknown sel */
+0x0A, 0x01, 0x08, /* HID usage sensor state ready sel */
+0x0A, 0x02, 0x08, /* HID usage sensor state not available sel */
+0x0A, 0x03, 0x08, /* HID usage sensor state no data sel */
+0x0A, 0x04, 0x08, /* HID usage sensor state initializing sel */
+0x0A, 0x05, 0x08, /* HID usage sensor state access denied sel */
+0x0A, 0x06, 0x08, /* HID usage sensor state error sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0x02, 0x02, /* HID usage sensor event */
+0x15, 0, /* HID logical Min_8(0) */
+0x25, 5, /* HID logical Max_8(5) */
+0x75, 8, /* HID report size(8) */
+0x95, 1, /* HID report count (1) */
+0xA1, 0x02, /* HID end collection (logical) */
+0x0A, 0x10, 0x08, /* HID usage sensor event unknown sel */
+0x0A, 0x11, 0x08, /* HID usage sensor event state changed sel */
+0x0A, 0x12, 0x08, /* HID usage sensor event property changed sel */
+0x0A, 0x13, 0x08, /* HID usage sensor event data updated sel */
+0x0A, 0x14, 0x08, /* HID usage sensor event poll response sel */
+0x0A, 0x15, 0x08, /* HID usage sensor event change sensitivity sel */
+0X81, 0x00, /* HID Input (Data_Arr_Abs) */
+0xC0, /* HID end collection */
+0x0A, 0xD1, 0x04, /* HID usage sensor data light illuminance */
+0x17, 0x00, 0x00, 0x01, 0x80, /* HID logical Min_32 */
+0x27, 0xFF, 0xFF, 0xFF, 0x7F, /* HID logical Max_32 */
+0x55, 0x0F, /* HID unit exponent(0x0F) */
+0x75, 32, /* HID report size(32) */
+0x95, 1, /* HID report count (1) */
+0X81, 0x02, /* HID Input (Data_Arr_Abs) */
+0xC0 /* HID end collection */
+};
+#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
@ 2020-08-09 11:54 ` kernel test robot
2020-08-09 13:59 ` Randy Dunlap
2020-08-19 10:40 ` Andy Shevchenko
2 siblings, 0 replies; 9+ messages in thread
From: kernel test robot @ 2020-08-09 11:54 UTC (permalink / raw)
To: Sandeep Singh, jikos, benjamin.tissoires, linux-kernel,
linux-input, srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko
Cc: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2150 bytes --]
Hi Sandeep,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.8 next-20200807]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Sandeep-Singh/SFH-Add-Support-for-AMD-Sensor-Fusion-Hub/20200809-182729
base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 06a81c1c7db9bd5de0bd38cd5acc44bb22b99150
config: riscv-allyesconfig (attached as .config)
compiler: riscv64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/hid/amd-sfh-hid/amd_mp2_pcie.c: In function 'amd_mp2_pci_init':
>> drivers/hid/amd-sfh-hid/amd_mp2_pcie.c:107:2: warning: ignoring return value of 'pcim_enable_device', declared with attribute warn_unused_result [-Wunused-result]
107 | pcim_enable_device(pdev);
| ^~~~~~~~~~~~~~~~~~~~~~~~
vim +/pcim_enable_device +107 drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
101
102 static int amd_mp2_pci_init(struct amd_mp2_dev *privdata, struct pci_dev *pdev)
103 {
104 int rc;
105
106 pci_set_drvdata(pdev, privdata);
> 107 pcim_enable_device(pdev);
108 pcim_iomap_regions(pdev, BIT(2), DRIVER_NAME);
109
110 privdata->mmio = pcim_iomap_table(pdev)[2];
111 pci_set_master(pdev);
112
113 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
114 if (rc)
115 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
116 return rc;
117 }
118
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 65969 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion Hub (SFH)
2020-08-09 10:25 ` [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion " Sandeep Singh
@ 2020-08-09 12:12 ` kernel test robot
0 siblings, 0 replies; 9+ messages in thread
From: kernel test robot @ 2020-08-09 12:12 UTC (permalink / raw)
To: Sandeep Singh, jikos, benjamin.tissoires, linux-kernel,
linux-input, srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko
Cc: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 6703 bytes --]
Hi Sandeep,
I love your patch! Perhaps something to improve:
[auto build test WARNING on linus/master]
[also build test WARNING on v5.8 next-20200807]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Sandeep-Singh/SFH-Add-Support-for-AMD-Sensor-Fusion-Hub/20200809-182729
base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 06a81c1c7db9bd5de0bd38cd5acc44bb22b99150
config: riscv-allyesconfig (attached as .config)
compiler: riscv64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
drivers/hid/amd-sfh-hid/amdsfh_hid_client.c: In function 'amd_sfh_hid_client_init':
>> drivers/hid/amd-sfh-hid/amdsfh_hid_client.c:140:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
140 | int rc, i;
| ^~
vim +/rc +140 drivers/hid/amd-sfh-hid/amdsfh_hid_client.c
6d2f42dac8a703 Sandeep Singh 2020-08-09 131
6d2f42dac8a703 Sandeep Singh 2020-08-09 132 int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
6d2f42dac8a703 Sandeep Singh 2020-08-09 133 {
6d2f42dac8a703 Sandeep Singh 2020-08-09 134 struct amdtp_cl_data *cl_data = privdata->cl_data;
6d2f42dac8a703 Sandeep Singh 2020-08-09 135 struct amd_mp2_sensor_info info;
6d2f42dac8a703 Sandeep Singh 2020-08-09 136 struct device *dev;
6d2f42dac8a703 Sandeep Singh 2020-08-09 137 u32 feature_report_size;
6d2f42dac8a703 Sandeep Singh 2020-08-09 138 u32 input_report_size;
6d2f42dac8a703 Sandeep Singh 2020-08-09 139 u8 cl_idx;
6d2f42dac8a703 Sandeep Singh 2020-08-09 @140 int rc, i;
6d2f42dac8a703 Sandeep Singh 2020-08-09 141
6d2f42dac8a703 Sandeep Singh 2020-08-09 142 dev = &privdata->pdev->dev;
6d2f42dac8a703 Sandeep Singh 2020-08-09 143 cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL);
6d2f42dac8a703 Sandeep Singh 2020-08-09 144 if (!cl_data)
6d2f42dac8a703 Sandeep Singh 2020-08-09 145 return -ENOMEM;
6d2f42dac8a703 Sandeep Singh 2020-08-09 146
6d2f42dac8a703 Sandeep Singh 2020-08-09 147 cl_data->num_hid_devices = amd_mp2_get_sensor_num(privdata, &cl_data->sensor_idx[0]);
6d2f42dac8a703 Sandeep Singh 2020-08-09 148
6d2f42dac8a703 Sandeep Singh 2020-08-09 149 INIT_DELAYED_WORK(&cl_data->work, amd_sfh_work);
6d2f42dac8a703 Sandeep Singh 2020-08-09 150 INIT_DELAYED_WORK(&cl_data->work_buffer, amd_sfh_work_buffer);
6d2f42dac8a703 Sandeep Singh 2020-08-09 151 INIT_LIST_HEAD(&req_list.list);
6d2f42dac8a703 Sandeep Singh 2020-08-09 152
6d2f42dac8a703 Sandeep Singh 2020-08-09 153 for (i = 0; i < cl_data->num_hid_devices; i++) {
6d2f42dac8a703 Sandeep Singh 2020-08-09 154 cl_data->sensor_virt_addr[i] = dma_alloc_coherent(dev, sizeof(int) * 8,
6d2f42dac8a703 Sandeep Singh 2020-08-09 155 &cl_data->sensor_phys_addr[i],
6d2f42dac8a703 Sandeep Singh 2020-08-09 156 GFP_KERNEL);
6d2f42dac8a703 Sandeep Singh 2020-08-09 157 cl_data->sensor_sts[i] = 0;
6d2f42dac8a703 Sandeep Singh 2020-08-09 158 cl_data->sensor_requested_cnt[i] = 0;
6d2f42dac8a703 Sandeep Singh 2020-08-09 159 cl_data->cur_hid_dev = i;
6d2f42dac8a703 Sandeep Singh 2020-08-09 160 cl_idx = cl_data->sensor_idx[i];
6d2f42dac8a703 Sandeep Singh 2020-08-09 161 cl_data->report_descr_sz[i] = get_descr_sz(cl_idx, descr_size);
6d2f42dac8a703 Sandeep Singh 2020-08-09 162 if (!cl_data->report_descr_sz[i])
6d2f42dac8a703 Sandeep Singh 2020-08-09 163 return -EINVAL;
6d2f42dac8a703 Sandeep Singh 2020-08-09 164
6d2f42dac8a703 Sandeep Singh 2020-08-09 165 feature_report_size = get_descr_sz(cl_idx, feature_size);
6d2f42dac8a703 Sandeep Singh 2020-08-09 166 if (!feature_report_size)
6d2f42dac8a703 Sandeep Singh 2020-08-09 167 return -EINVAL;
6d2f42dac8a703 Sandeep Singh 2020-08-09 168
6d2f42dac8a703 Sandeep Singh 2020-08-09 169 input_report_size = get_descr_sz(cl_idx, input_size);
6d2f42dac8a703 Sandeep Singh 2020-08-09 170 if (!input_report_size)
6d2f42dac8a703 Sandeep Singh 2020-08-09 171 return -EINVAL;
6d2f42dac8a703 Sandeep Singh 2020-08-09 172
6d2f42dac8a703 Sandeep Singh 2020-08-09 173 cl_data->feature_report[i] = kzalloc(feature_report_size, GFP_KERNEL);
6d2f42dac8a703 Sandeep Singh 2020-08-09 174 if (!cl_data->feature_report[i])
6d2f42dac8a703 Sandeep Singh 2020-08-09 175 return -ENOMEM;
6d2f42dac8a703 Sandeep Singh 2020-08-09 176
6d2f42dac8a703 Sandeep Singh 2020-08-09 177 cl_data->input_report[i] = kzalloc(input_report_size, GFP_KERNEL);
6d2f42dac8a703 Sandeep Singh 2020-08-09 178 if (!cl_data->input_report[i])
6d2f42dac8a703 Sandeep Singh 2020-08-09 179 return -ENOMEM;
6d2f42dac8a703 Sandeep Singh 2020-08-09 180
6d2f42dac8a703 Sandeep Singh 2020-08-09 181 info.period = PERIOD;
6d2f42dac8a703 Sandeep Singh 2020-08-09 182 info.sensor_idx = cl_idx;
6d2f42dac8a703 Sandeep Singh 2020-08-09 183 info.phys_address = cl_data->sensor_phys_addr[i];
6d2f42dac8a703 Sandeep Singh 2020-08-09 184
6d2f42dac8a703 Sandeep Singh 2020-08-09 185 cl_data->report_descr[i] = kzalloc(cl_data->report_descr_sz[i], GFP_KERNEL);
6d2f42dac8a703 Sandeep Singh 2020-08-09 186 if (!cl_data->report_descr[i])
6d2f42dac8a703 Sandeep Singh 2020-08-09 187 return -ENOMEM;
6d2f42dac8a703 Sandeep Singh 2020-08-09 188
6d2f42dac8a703 Sandeep Singh 2020-08-09 189 rc = get_report_descriptor(cl_idx, cl_data->report_descr[i]);
6d2f42dac8a703 Sandeep Singh 2020-08-09 190 rc = amdtp_hid_probe(cl_data->cur_hid_dev, cl_data);
6d2f42dac8a703 Sandeep Singh 2020-08-09 191 amd_start_sensor(privdata, info);
6d2f42dac8a703 Sandeep Singh 2020-08-09 192 cl_data->sensor_sts[i] = 1;
6d2f42dac8a703 Sandeep Singh 2020-08-09 193 }
6d2f42dac8a703 Sandeep Singh 2020-08-09 194 privdata->cl_data = cl_data;
6d2f42dac8a703 Sandeep Singh 2020-08-09 195 schedule_delayed_work(&cl_data->work_buffer, PERIOD);
6d2f42dac8a703 Sandeep Singh 2020-08-09 196 return 0;
6d2f42dac8a703 Sandeep Singh 2020-08-09 197 }
6d2f42dac8a703 Sandeep Singh 2020-08-09 198
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 65969 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
2020-08-09 11:54 ` kernel test robot
@ 2020-08-09 13:59 ` Randy Dunlap
2020-08-19 10:40 ` Andy Shevchenko
2 siblings, 0 replies; 9+ messages in thread
From: Randy Dunlap @ 2020-08-09 13:59 UTC (permalink / raw)
To: Sandeep Singh, jikos, benjamin.tissoires, linux-kernel,
linux-input, srinivas.pandruvada, jic23, linux-iio, hdegoede,
Nehal-bakulchandra.Shah, andy.shevchenko, mail, m.felsch
Cc: Shyam-sundar.S-k
On 8/9/20 3:25 AM, Sandeep Singh wrote:
> From: Sandeep Singh <sandeep.singh@amd.com>
>
> AMD SFH uses HID over PCIe bus.SFH fw is part of MP2 processor
> (MP2 which is an ARM® Cortex-M4 core based co-processor to x86) and
> it runs on MP2 where in driver resides on X86. This part of module
> will communicate with MP2 FW and provide that data into DRAM
>
> Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
> ---
> drivers/hid/Kconfig | 2 +
> drivers/hid/Makefile | 2 +
> drivers/hid/amd-sfh-hid/Kconfig | 21 ++++
> drivers/hid/amd-sfh-hid/Makefile | 15 +++
> drivers/hid/amd-sfh-hid/amd_mp2_pcie.c | 162 +++++++++++++++++++++++++
> drivers/hid/amd-sfh-hid/amd_mp2_pcie.h | 83 +++++++++++++
> 6 files changed, 285 insertions(+)
> create mode 100644 drivers/hid/amd-sfh-hid/Kconfig
> create mode 100644 drivers/hid/amd-sfh-hid/Makefile
> create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.c
> create mode 100644 drivers/hid/amd-sfh-hid/amd_mp2_pcie.h
Hi,
> diff --git a/drivers/hid/amd-sfh-hid/Kconfig b/drivers/hid/amd-sfh-hid/Kconfig
> new file mode 100644
> index 000000000000..e73cf9fe1324
> --- /dev/null
> +++ b/drivers/hid/amd-sfh-hid/Kconfig
> @@ -0,0 +1,21 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +menu "AMD SFH HID support"
> + depends on X86_64 || COMPILE_TEST
> + depends on PCI
> +
> +config AMD_SFH_HID
> + tristate "AMD Sensor Fusion Hub"
> + select HID
How about
depends on HID
We try hard not to select/enable entire subsystems just because one driver
wants it.
Also, HID depends on INPUT, so it's not safe to select HID unless INPUT is
already enabled.
> + help
> + If you say yes to this option, support will be included for the AMD
> + Sensor Fusion Hub.
> + This driver will enable sensors functionality to user through HID
> + framework. Basically this driver will get data from MP2 FW
s/FW/firmware/
or is it "framework" ?
> + and provide that data to HID framework.
> + MP2 which is an ARM® Cortex-M4 core based co-processor to x86.
> +
> + This driver can also be built as modules. If so, the modules will
built as a module. If so, the module will
> + be called amd-sfhtp-hid.
> + Say Y or M here if you want to support AMD SFH. If unsure, say N.
> +
> +endmenu
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
2020-08-09 11:54 ` kernel test robot
2020-08-09 13:59 ` Randy Dunlap
@ 2020-08-19 10:40 ` Andy Shevchenko
2 siblings, 0 replies; 9+ messages in thread
From: Andy Shevchenko @ 2020-08-19 10:40 UTC (permalink / raw)
To: Sandeep Singh
Cc: Jiri Kosina, Benjamin Tissoires, Linux Kernel Mailing List,
linux-input, Srinivas Pandruvada, Jonathan Cameron, linux-iio,
Hans de Goede, Shah, Nehal-bakulchandra, Richard Neumann,
Marco Felsch, Shyam-sundar.S-k
On Sun, Aug 9, 2020 at 1:25 PM Sandeep Singh <Sandeep.Singh@amd.com> wrote:
> AMD SFH uses HID over PCIe bus.SFH fw is part of MP2 processor
> (MP2 which is an ARM® Cortex-M4 core based co-processor to x86) and
> it runs on MP2 where in driver resides on X86. This part of module
where the driver
> will communicate with MP2 FW and provide that data into DRAM
...
> +#
> +#
One is enough.
...
> +#define ACEL_EN BIT(accel_idx)
> +#define GYRO_EN BIT(gyro_idx)
> +#define MAGNO_EN BIT(mag_idx)
> +#define ALS_EN BIT(als_idx)
What is this?
...
> +int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata, u8 *sensor_id)
> +{
> + int activestatus, num_of_sensors = 0;
> +
> + if (!sensor_id)
> + return -EINVAL;
Is it possible?
> + privdata->activecontrolstatus = readl(privdata->mmio + AMD_P2C_MSG3);
> + activestatus = privdata->activecontrolstatus >> 4;
> + if (ACEL_EN & activestatus)
> + sensor_id[num_of_sensors++] = accel_idx;
> +
> + if (GYRO_EN & activestatus)
> + sensor_id[num_of_sensors++] = gyro_idx;
> +
> + if (MAGNO_EN & activestatus)
> + sensor_id[num_of_sensors++] = mag_idx;
> +
> + if (ALS_EN & activestatus)
> + sensor_id[num_of_sensors++] = als_idx;
> +
> + return num_of_sensors;
> +}
...
> +static int amd_mp2_pci_init(struct amd_mp2_dev *privdata, struct pci_dev *pdev)
> +{
> + int rc;
> +
> + pci_set_drvdata(pdev, privdata);
This is better to have after initial resources were retrieved.
> + pcim_enable_device(pdev);
> + pcim_iomap_regions(pdev, BIT(2), DRIVER_NAME);
Where is the error check?
> + privdata->mmio = pcim_iomap_table(pdev)[2];
> + pci_set_master(pdev);
> +
> + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
> + if (rc)
> + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
> + return rc;
> +}
What is the point to have this function separated from ->probe()?
...
> + rc = amd_sfh_hid_client_init(privdata);
> + if (rc)
> + return rc;
> + return 0;
return amd_...(...);
...
> +static const struct pci_device_id amd_mp2_pci_tbl[] = {
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_MP2) },
> + {},
No comma.
> +};
...
> +#include <linux/pci.h>
I don't see any users of it in the file.
Use forward declaration instead.
> +#include <linux/types.h>
...
> +enum command_id {
> + enable_sensor = 1,
> + disable_sensor = 2,
> + stop_all_sensors = 8,
> + invalid_cmd = 0xf
GENMASK()?
(Will require bits.h)
> +};
> +
> +enum sensor_idx {
> + accel_idx = 0,
> + gyro_idx = 1,
> + mag_idx = 2,
> + als_idx = 19
+ comma.
> +};
> +
> +struct amd_mp2_dev {
> + struct pci_dev *pdev;
> + struct amdtp_cl_data *cl_data;
> + void __iomem *mmio;
Is __iomem provided by linux/types.h? Otherwise include corresponding header.
> + u32 activecontrolstatus;
> +};
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-08-19 10:40 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-09 10:25 [PATCH v6 0/4] SFH: Add Support for AMD Sensor Fusion Hub Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 1/4] SFH: Add maintainers and documentation for AMD SFH based on HID framework Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 2/4] SFH: PCIe driver to add support of AMD sensor fusion Sandeep Singh
2020-08-09 11:54 ` kernel test robot
2020-08-09 13:59 ` Randy Dunlap
2020-08-19 10:40 ` Andy Shevchenko
2020-08-09 10:25 ` [PATCH v6 3/4] SFH: Transport Driver to add support of AMD Sensor Fusion Hub (SFH) Sandeep Singh
2020-08-09 10:25 ` [PATCH v6 4/4] SFH: Create HID report to Enable support of AMD sensor fusion " Sandeep Singh
2020-08-09 12:12 ` kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).