messages from 2020-01-11 12:18:11 to 2020-01-20 16:44:54 UTC [more...]
[PATCH v3 0/2] iio: srf04: add support for power management
2020-01-20 16:44 UTC
[PATCH 0/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
2020-01-20 15:01 UTC (3+ messages)
` [PATCH 1/2] iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
` [PATCH 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
[PATCH 1/4] iio: imu: adis: Add self_test_reg variable
2020-01-20 14:20 UTC (4+ messages)
` [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
` [PATCH 3/4] iio: adis16480: Make use of __adis_initial_startup
` [PATCH 4/4] iio: adis16460: "
[PATCH 0/9] Add support of similar chips
2020-01-20 9:36 UTC (10+ messages)
` [PATCH 1/9] dt-bindings: iio: imu: inv_mpu6050: add missing entry for mpu6000
` [PATCH 2/9] iio: imu: inv_mpu6050: cleanup spi support
` [PATCH 3/9] iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689
` [PATCH 4/9] dt-bindings: add description for icm20609 and icm20689
` [PATCH 5/9] iio: imu: inv_mpu6050: add support of IAM20680
` [PATCH 6/9] dt-bindings: add description for iam20680
` [PATCH 7/9] iio: imu: inv_mpu6050: add support of ICM20690
` [PATCH 8/9] dt-bindings: add description for icm20690
` [PATCH 9/9] iio: imu: inv_mpu6050: fix LPF bandwidth setting
[PATCH v1] iio: accel: st_accel: Use st_sensors_dev_name_probe()
2020-01-20 9:25 UTC
[PATCH 0/5] mfd: rn5t618: add ADC support
2020-01-20 8:49 UTC (10+ messages)
` [PATCH 1/5] mfd: rn5t618: mark ADC control register volatile
` [PATCH 2/5] mfd: rn5t618: add ADC subdevice for RC5T619
` [PATCH 3/5] iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
` [RFC PATCH 4/5] mfd: rn5t618: add IRQ definitions for RN5T618
` [RFC PATCH 5/5] mfd: rn5t618: add ADC subdevice "
[PATCH v4 0/7] Add support for Azoteq IQS620A/621/622/624/625
2020-01-20 8:00 UTC (16+ messages)
` [PATCH v4 1/7] dt-bindings: Add bindings "
` [PATCH v4 2/7] mfd: Add support "
` [PATCH v4 3/7] input: keyboard: "
` [PATCH v4 4/7] pwm: Add support for Azoteq IQS620A PWM generator
` [PATCH v4 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
` [PATCH v4 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
` [PATCH v4 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
[PATCH v2 0/3] Enhancements to at91-sama5d2_adc driver
2020-01-20 7:27 UTC (8+ messages)
` [PATCH v2 1/3] iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
` [PATCH v2 2/3] iio: adc: at91-sama5d2_adc: handle unfinished conversions
` [PATCH v2 3/3] iio: adc: at91-sama5d2_adc: update for other trigger usage
[PULL] Second set of IIO new device support, cleanups and minor fixes for the 5.6 cycle
2020-01-19 14:01 UTC (2+ messages)
[PATCH v1 1/2] dt-binding: iio: add NPCM ADC reset support
2020-01-19 11:00 UTC (2+ messages)
` [PATCH v1 2/2] iio: adc: modify NPCM "
[PATCH 0/2] iio: dac: stm32-dac: improve reset controller use
2020-01-18 14:32 UTC (5+ messages)
` [PATCH 1/2] iio: dac: stm32-dac: use reset controller only at probe time
` [PATCH 2/2] iio: dac: stm32-dac: better handle reset controller failures
[PATCH v1 1/2] iio: accel: kxcjk1013: Support orientation matrix
2020-01-18 14:28 UTC (8+ messages)
` [PATCH v1 2/2] dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
[PATCH v3] iio: imu: st_lsm6dsx: add mount matrix support
2020-01-18 14:24 UTC (2+ messages)
[PATCH] iio: adc: stm32-adc: don't print an error on probe deferral
2020-01-18 14:22 UTC (2+ messages)
[PATCH 1/3] iio: amplifiers: hmc425a: Add support for HMC425A step attenuator with gpio interface
2020-01-18 13:54 UTC (9+ messages)
` [PATCH 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
` [PATCH 3/3] MAINTAINERS: add entry for hmc425a driver
[PATCH 1/2] iio: imu: adis16480: Add support for ADIS16490
2020-01-18 13:36 UTC (4+ messages)
` [PATCH 2/2] dt-bindings: iio: adis16480: add compatible entry "
[PATCH] iio: accel: bma400: integer underflow setting accel scale
2020-01-18 13:34 UTC (8+ messages)
` [PATCH v2] iio: accel: bma400: prevent setting accel scale too low
[PATCH v3] iio: imu/mpu6050: support dual-edge IRQ
2020-01-18 13:32 UTC (2+ messages)
[PATCH v2] iio: imu: inv_mpu6050: add fifo temperature data support
2020-01-18 11:44 UTC (2+ messages)
[PATCH v1 1/2] iio: magnetometer: ak8975: Get rid of platform data
2020-01-18 11:41 UTC (4+ messages)
` [PATCH v1 2/2] iio: magnetometer: ak8975: Convert to use device_get_match_data()
[PATCH] iio: frequency: adf4371: Fix divide by zero exception bug
2020-01-18 11:29 UTC (4+ messages)
[PATCH V2] iio: ad_sigma_delta: Add custom irq flags
2020-01-18 11:20 UTC (6+ messages)
` [PATCH 0/2 V3] iio: adc: ad7124 fix wrong irq flag
` [PATCH 1/2 V3] iio: adc: ad-sigma-delta: Allow custom IRQ flags
` [PATCH 2/2 V3] iio: adc: ad7124: Set IRQ type to falling
[PATCH 1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx
2020-01-18 11:15 UTC (6+ messages)
` [PATCH 3/5] IIO: Ingenic JZ47xx: Add touchscreen mode
[PATCH 1/2] iio: imu: inv_mpu6050: fix temperature reporting using bad unit
2020-01-18 11:10 UTC (7+ messages)
` [PATCH 2/2] iio: imu: inv_mpu6050: add fifo temperature data support
[PATCH 1/2 v4] iio: light: Add DT bindings for GP2AP002
2020-01-17 17:53 UTC (6+ messages)
` [PATCH 2/2 v4] iio: light: Add a driver for Sharp GP2AP002x00F
[PATCH AUTOSEL 4.19 482/671] iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off
2020-01-17 2:43 UTC (4+ messages)
` [PATCH AUTOSEL 4.19 523/671] iio: dac: ad5380: fix incorrect assignment to val
[PATCH AUTOSEL 4.19 006/671] iio: fix position relative kernel version
2020-01-16 16:43 UTC
[PATCH v2 0/3] iio: chemical: atlas-sensor: add DO support
2020-01-16 18:21 UTC (5+ messages)
` [PATCH v2 1/3] iio: chemical: atlas-sensor: allow probe without interrupt line
` [PATCH v2 2/3] iio: chemical: atlas-sensor: add DO-SM module support
` [PATCH v2 3/3] dt-bindings: iio: chemical: consolidate atlas-sensor docs
[PATCH AUTOSEL 4.14 286/371] iio: dac: ad5380: fix incorrect assignment to val
2020-01-16 17:22 UTC
[PATCH AUTOSEL 4.9 195/251] iio: dac: ad5380: fix incorrect assignment to val
2020-01-16 17:35 UTC
[PATCH AUTOSEL 4.4 132/174] iio: dac: ad5380: fix incorrect assignment to val
2020-01-16 17:42 UTC
[PATCH AUTOSEL 5.4 047/205] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1
2020-01-16 16:40 UTC
[PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
2020-01-16 3:34 UTC (6+ messages)
` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
[PATCH v3] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
2020-01-15 13:45 UTC
[PATCH v2] dt-bindings: iio: adc: stm32-adc: convert bindings to json-schema
2020-01-15 13:34 UTC (5+ messages)
[PATCH v2 00/17] add device tree for SAM9X60 SoC and SAM9X60-EK board
2020-01-15 8:43 UTC (43+ messages)
` [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
` [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
` [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
` [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
` [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
` [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
` [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
` [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
` [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
` [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
` [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
` [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
` [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
` [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
[PATCH v2 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
2020-01-15 0:08 UTC (2+ messages)
[PATCH] dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
2020-01-14 18:15 UTC (2+ messages)
[PULL] Second set of IIO fixes for the 5.5 cycle
2020-01-14 10:11 UTC (6+ messages)
[PATCH] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
2020-01-14 9:12 UTC (5+ messages)
[PATCH] iio: imu/mpu6050: support dual-edge IRQ
2020-01-13 22:15 UTC (5+ messages)
` [PATCH v2] "
[PATCH] iio: imu: adis: use new `delay` structure for SPI transfer delays
2020-01-13 22:04 UTC (3+ messages)
` [PATCH v2] "
[PATCH v2] iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
2020-01-13 22:02 UTC (3+ messages)
[PATCH v2] iio: adc: stm32-dfsdm: fix single conversion
2020-01-13 21:58 UTC (3+ messages)
[PATCH v1 1/9] iio: light: st_uvis25: Drop unneeded header inclusion
2020-01-13 21:53 UTC (9+ messages)
` [PATCH v1 8/9] iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
` [PATCH v1 9/9] iio: st_sensors: Make use of device properties
[PATCH v1] iio: st_gyro: Correct data for LSM9DS0 gyro
2020-01-13 21:49 UTC (4+ messages)
[PATCH] iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enable
2020-01-13 21:43 UTC (2+ messages)
[PATCH v2 1/4] iio: adc: ad7606: Add support for AD7606B ADC
2020-01-13 17:32 UTC (3+ messages)
` [PATCH v2 3/4] dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
[PATCH] cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
2020-01-13 16:52 UTC (2+ messages)
[PATCH 3/4] SFH: Transport Driver to add support of AMD sensor fusion Hub (SFH)
2020-01-13 10:45 UTC (2+ messages)
[PATCH v2 1/2] iio: adis: Introduce timeouts structure
2020-01-13 9:18 UTC (3+ messages)
Investment opportunity
2020-01-12 5:00 UTC
[PATCH v2] iio: imu: st_lsm6dsx: add mount matrix support
2020-01-11 12:18 UTC (3+ messages)
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).