* [PULL] 1st set of IIO and counter fixes for the 5.11 cycle.
@ 2021-01-14 22:14 Jonathan Cameron
2021-01-15 7:17 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2021-01-14 22:14 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 7c53f6b671f4aba70ff15e1b05148b10d58c2837:
Linux 5.11-rc3 (2021-01-10 14:34:50 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.11a
for you to fetch changes up to b8653aff1c8876142f965fc69e12ba217da13182:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16 (2021-01-14 21:01:22 +0000)
----------------------------------------------------------------
First set of IIO and counter fixes for the 5.11 cycle.
Counter fixes
ti,eqep
- Remove floor interface as the device always wraps to 0.
IIO
adi,ad5504
- Fix inverted power state control.
bosch,bma255
- Fix a difference in part naming between dt-binding doc and the driver.
melexis,mlx90632
- Add a delay after reset command.
semtech,sx9310
- Off by one error.
- Fix an issue due to need to skip a value in a power of 2 series.
st,st_sensors
- Fix a possible infinite loop if data read is not define or reading it fails.
ti,am335x
- Remove a left over iio_kfifo_free after managed allocation conversion.
----------------------------------------------------------------
Alexandru Ardelean (1):
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
Dan Carpenter (1):
iio: sx9310: Off by one in sx9310_read_thresh()
David Lechner (1):
counter:ti-eqep: remove floor
Lars-Peter Clausen (1):
iio: ad5504: Fix setting power-down state
Lorenzo Bianconi (1):
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
Slaveyko Slaveykov (1):
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
Stephan Gerhold (1):
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
Stephen Boyd (1):
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
.../bindings/iio/accel/bosch,bma255.yaml | 4 +--
drivers/counter/ti-eqep.c | 35 ----------------------
drivers/iio/adc/ti_am335x_adc.c | 6 +---
drivers/iio/common/st_sensors/st_sensors_trigger.c | 31 ++++++++++---------
drivers/iio/dac/ad5504.c | 4 +--
drivers/iio/proximity/sx9310.c | 5 ++--
drivers/iio/temperature/mlx90632.c | 6 ++++
7 files changed, 31 insertions(+), 60 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] 1st set of IIO and counter fixes for the 5.11 cycle.
2021-01-14 22:14 [PULL] 1st set of IIO and counter fixes for the 5.11 cycle Jonathan Cameron
@ 2021-01-15 7:17 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2021-01-15 7:17 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Thu, Jan 14, 2021 at 10:14:24PM +0000, Jonathan Cameron wrote:
> The following changes since commit 7c53f6b671f4aba70ff15e1b05148b10d58c2837:
>
> Linux 5.11-rc3 (2021-01-10 14:34:50 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.11a
Pulled and pushed out, thanks
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-01-15 7:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-14 22:14 [PULL] 1st set of IIO and counter fixes for the 5.11 cycle Jonathan Cameron
2021-01-15 7:17 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).