[RFC PATCH 0/5] iio: Support ROHM/Kionix kx022a

From: Matti Vaittinen <mazziesaccount@gmail.com>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Matti Vaittinen <mazziesaccount@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Nikita Yushchenko <nikita.yoush@cogentembedded.com>,
	Cosmin Tanislav <demonsingur@gmail.com>,
	Jagath Jog J <jagathjog1996@gmail.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH 0/5] iio: Support ROHM/Kionix kx022a
Date: Wed, 21 Sep 2022 14:40:33 +0300	[thread overview]
Message-ID: <cover.1663760018.git.mazziesaccount@gmail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 2857 bytes --]

Add initial support for ROHM/Kionix kx022a accelerometer

This series is not ready for being merged as such. The first two patches
in the series (the new regulator devm interfaces) are already merged to
Mark's tree but have not yet found their way to the mainline. This is
the reason I marked series as RFC. You can also skip the reviewing of
first two patches as they are there just to make the series compile on
top of the v6.0-rc4. I will re-spin the series without the patches 0001
and 0002 and drop the RFC tag when the v6.1-rc1 is out.

About the HW:
KX022A accelerometer is a sensor which:
	- supports G-ranges of (+/-) 2, 4, 8, and 16G
	- can be connected to I2C or SPI
	- has internal HW FIFO buffer
	- supports various ODRs (output data rates)
	- support detecting special events like double tap or motion
	- can be configured to wake-up system when events are detected.

About the series:

This series adds support for only getting the accelerometer data and
configuring the G-range / ODR via IIO. Motion detection or double-tap
detection are not supported by the series. The other quite important but
still missing piece is the runtime PM. Nevertheless, the driver should be
usable and brings the basic support for getting accelerometer data.

---

Matti Vaittinen (5):
  regulator: Add devm helpers for get and enable
  regulator: Add devm helpers for get and enable
  dt-bindings: iio: Add KX022A accelerometer
  iio: accel: Support Kionix/ROHM KX022A accelerometer
  MAINTAINERS: Add KX022A maintainer entry

 .../bindings/iio/accel/kionix,kx022a.yaml     |   58 +
 MAINTAINERS                                   |    5 +
 drivers/iio/accel/Kconfig                     |   23 +
 drivers/iio/accel/Makefile                    |    3 +
 drivers/iio/accel/kionix-kx022a-i2c.c         |   52 +
 drivers/iio/accel/kionix-kx022a-spi.c         |   50 +
 drivers/iio/accel/kionix-kx022a.c             | 1149 +++++++++++++++++
 drivers/iio/accel/kionix-kx022a.h             |   76 ++
 drivers/regulator/devres.c                    |  164 +++
 include/linux/regulator/consumer.h            |   27 +
 10 files changed, 1607 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
 create mode 100644 drivers/iio/accel/kionix-kx022a-i2c.c
 create mode 100644 drivers/iio/accel/kionix-kx022a-spi.c
 create mode 100644 drivers/iio/accel/kionix-kx022a.c
 create mode 100644 drivers/iio/accel/kionix-kx022a.h

-- 
2.37.1

-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]