Linux Input Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
@ 2019-09-04  6:23 Robin van der Gracht
  2019-09-04  6:52 ` Marco Felsch
  2019-09-12 20:13 ` Dmitry Torokhov
  0 siblings, 2 replies; 11+ messages in thread
From: Robin van der Gracht @ 2019-09-04  6:23 UTC (permalink / raw)
  To: robin
  Cc: linux-input @ vger . kernel . org,
	linux-kernel @ vger . kernel . org, Dmitry Torokhov, RobinGong,
	Pengutronix Kernel Team, Marco Felsch, Shawn Guo, Adam Ford,
	linux-arm-kernel @ lists . infradead . org

The first generation i.MX6 processors does not send an interrupt when the
power key is pressed. It sends a power down request interrupt if the key is
released before a hard shutdown (5 second press). This should allow
software to bring down the SoC safely.

For this driver to work as a regular power key with the older SoCs, we need
to send a keypress AND release when we get the power down request irq.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---

Changes v2 -> v3:
 - Drop alt compatible string for identifying first revision snvs hardware,
   read minor revision from register instead.
 - Drop imx6qdl.dtsi modification and device-tree binding documentation.
 - Add an additional input_sync() to create 2 seperate input reports for press
   and release.

 drivers/input/keyboard/Kconfig       |  2 +-
 drivers/input/keyboard/snvs_pwrkey.c | 28 ++++++++++++++++++++++++++--
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f19dab34f..937e58da5ce1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
 	depends on OF
 	help
 	  This is the snvs powerkey driver for the Freescale i.MX application
-	  processors that are newer than i.MX6 SX.
+	  processors.
 
 	  To compile this driver as a module, choose M here; the
 	  module will be called snvs_pwrkey.
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 5342d8d45f81..828580eee0d2 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -19,6 +19,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#define SNVS_HPVIDR1_REG 0xF8
 #define SNVS_LPSR_REG	0x4C	/* LP Status Register */
 #define SNVS_LPCR_REG	0x38	/* LP Control Register */
 #define SNVS_HPSR_REG	0x14
@@ -37,6 +38,7 @@ struct pwrkey_drv_data {
 	int wakeup;
 	struct timer_list check_timer;
 	struct input_dev *input;
+	u8 minor_rev;
 };
 
 static void imx_imx_snvs_check_for_events(struct timer_list *t)
@@ -45,6 +47,20 @@ static void imx_imx_snvs_check_for_events(struct timer_list *t)
 	struct input_dev *input = pdata->input;
 	u32 state;
 
+	if (pdata->minor_rev == 0) {
+		/*
+		 * The first generation i.MX6 SoCs only sends an interrupt on
+		 * button release. To mimic power-key usage, we'll prepend a
+		 * press event.
+		 */
+		input_report_key(input, pdata->keycode, 1);
+		input_sync(input);
+		input_report_key(input, pdata->keycode, 0);
+		input_sync(input);
+		pm_relax(input->dev.parent);
+		return;
+	}
+
 	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
 	state = state & SNVS_HPSR_BTN ? 1 : 0;
 
@@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
 	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+	unsigned long expire = jiffies;
 	u32 lp_status;
 
 	pm_wakeup_event(pdata->input->dev.parent, 0);
 
 	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
-	if (lp_status & SNVS_LPSR_SPO)
-		mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+	if (lp_status & SNVS_LPSR_SPO) {
+		if (pdata->minor_rev > 0)
+			expire = jiffies + msecs_to_jiffies(DEBOUNCE_TIME);
+		mod_timer(&pdata->check_timer, expire);
+	}
 
 	/* clear SPO status */
 	regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
@@ -94,6 +114,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	struct input_dev *input = NULL;
 	struct device_node *np;
 	int error;
+	u32 vid;
 
 	/* Get SNVS register Page */
 	np = pdev->dev.of_node;
@@ -123,6 +144,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
+	pdata->minor_rev = vid & 0xff;
+
 	regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
 
 	/* clear the unexpected interrupt before driver ready */
-- 
2.20.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-04  6:23 [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q Robin van der Gracht
2019-09-04  6:52 ` Marco Felsch
2019-09-13  7:39   ` robin
2019-09-12 20:13 ` Dmitry Torokhov
2019-09-13  7:30   ` robin
2019-09-16  7:45     ` Robin Gong
2019-09-16 23:37       ` Dmitry Torokhov
2019-11-20  9:27         ` Marco Felsch
2019-11-20 16:32           ` robin
2019-11-21 13:17             ` Robin Gong
2019-11-22 22:48               ` Dmitry Torokhov

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git