From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v9 45/55] Input: Atmel: improve error handling in mxt_start()
Date: Wed, 25 Mar 2020 06:33:24 -0700 [thread overview]
Message-ID: <20200325133334.19346-46-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200325133334.19346-1-jiada_wang@mentor.com>
From: Deepak Das <deepak_das@mentor.com>
mxt_start() does not return error in any of
the failure cases which will allow input_dev->open()
to return success even in case of any failure.
This commit modifies mxt_start() to return error
in failure cases.
Signed-off-by: Deepak Das <deepak_das@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 31 ++++++++++++------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index bbec5a8e0bb6..0f7ee987a9c5 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3981,12 +3981,13 @@ static int mxt_start(struct mxt_data *data)
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
- mxt_soft_reset(data);
-
+ ret = mxt_soft_reset(data);
+ if (ret)
+ break;
/* Touch enable */
/* 0x83 = SCANEN | RPTEN | ENABLE */
- mxt_write_object(data,
- MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
+ ret = mxt_write_object(data,
+ MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;
case MXT_SUSPEND_REGULATOR:
@@ -4000,27 +4001,26 @@ static int mxt_start(struct mxt_data *data)
* Discard any touch messages still in message buffer
* from before chip went to sleep
*/
- mxt_process_messages_until_invalid(data);
+ ret = mxt_process_messages_until_invalid(data);
+ if (ret)
+ break;
ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
if (ret)
- return ret;
+ break;
/* Recalibrate since chip has been in deep sleep */
ret = mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
if (ret)
- return ret;
+ break;
ret = mxt_acquire_irq(data);
- if (ret)
- return ret;
-
- break;
}
- data->suspended = false;
+ if (!ret)
+ data->suspended = false;
- return 0;
+ return ret;
}
static int mxt_stop(struct mxt_data *data)
@@ -4343,6 +4343,7 @@ static int __maybe_unused mxt_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct mxt_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
+ int ret = 0;
if (!input_dev)
return 0;
@@ -4352,11 +4353,11 @@ static int __maybe_unused mxt_resume(struct device *dev)
mutex_lock(&input_dev->mutex);
if (input_dev->users)
- mxt_start(data);
+ ret = mxt_start(data);
mutex_unlock(&input_dev->mutex);
- return 0;
+ return ret;
}
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
--
2.17.1
next prev parent reply other threads:[~2020-03-25 13:36 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 13:32 [PATCH v9 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-25 13:32 ` [PATCH v9 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-25 13:32 ` [PATCH v9 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-25 13:32 ` [PATCH v9 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-25 13:32 ` [PATCH v9 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-25 13:32 ` [PATCH v9 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-25 13:32 ` [PATCH v9 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-25 13:32 ` [PATCH v9 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-25 13:32 ` [PATCH v9 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-25 13:32 ` [PATCH v9 13/55] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-25 19:05 ` Dmitry Osipenko
2020-03-27 11:09 ` Wang, Jiada
2020-03-29 18:54 ` Dmitry Osipenko
2020-03-30 4:10 ` Wang, Jiada
2020-03-25 13:32 ` [PATCH v9 14/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-25 13:32 ` [PATCH v9 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-25 13:32 ` [PATCH v9 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-25 13:32 ` [PATCH v9 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-25 13:33 ` [PATCH v9 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-25 13:33 ` [PATCH v9 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-25 13:33 ` [PATCH v9 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-25 13:33 ` [PATCH v9 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-25 13:33 ` [PATCH v9 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-25 13:33 ` [PATCH v9 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-25 13:33 ` [PATCH v9 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-25 13:33 ` [PATCH v9 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-25 13:33 ` [PATCH v9 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-25 13:33 ` [PATCH v9 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-25 13:33 ` [PATCH v9 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-25 13:33 ` [PATCH v9 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-25 13:33 ` [PATCH v9 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-25 13:33 ` [PATCH v9 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-25 13:33 ` [PATCH v9 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-25 13:33 ` [PATCH v9 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-25 13:33 ` [PATCH v9 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-25 13:33 ` [PATCH v9 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-25 13:33 ` [PATCH v9 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-25 13:33 ` Jiada Wang [this message]
2020-03-25 13:33 ` [PATCH v9 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-25 13:33 ` [PATCH v9 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-25 13:33 ` [PATCH v9 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-25 19:35 ` Dmitry Osipenko
2020-03-25 19:41 ` Dmitry Osipenko
2020-03-27 12:49 ` Wang, Jiada
2020-03-27 13:37 ` Dmitry Osipenko
2020-03-27 13:43 ` Dmitry Osipenko
2020-03-25 13:33 ` [PATCH v9 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-25 13:33 ` [PATCH v9 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325133334.19346-46-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).