* [PATCH v3 3/4] dt-bindings: input: Add bindings for Azoteq IQS626A
2021-03-01 23:49 [PATCH v3 0/4] Add support for Azoteq IQS626A Jeff LaBundy
2021-03-01 23:49 ` [PATCH v3 1/4] Input: touchscreen - move helper functions to core Jeff LaBundy
2021-03-01 23:49 ` [PATCH v3 2/4] Input: touchscreen - broaden use-cases described in comments Jeff LaBundy
@ 2021-03-01 23:49 ` Jeff LaBundy
2021-03-22 23:47 ` Dmitry Torokhov
2021-03-01 23:49 ` [PATCH v3 4/4] Input: Add support " Jeff LaBundy
3 siblings, 1 reply; 9+ messages in thread
From: Jeff LaBundy @ 2021-03-01 23:49 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt; +Cc: linux-input, devicetree, Jeff LaBundy
This patch adds device tree bindings for the Azoteq IQS626A
capacitive touch controller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in v3:
- Updated path to touchscreen.yaml
- Added Reviewed-by trailer
Changes in v2:
- Added missing $ref to touchscreen.yaml
.../devicetree/bindings/input/iqs626a.yaml | 843 ++++++++++++++++++
1 file changed, 843 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/iqs626a.yaml
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
new file mode 100644
index 000000000000..0cb736c541c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -0,0 +1,843 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs626a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS626A Capacitive Touch Controller
+
+maintainers:
+ - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+ The Azoteq IQS626A is a 14-channel capacitive touch controller that features
+ additional Hall-effect and inductive sensing capabilities.
+
+ Link to datasheet: https://www.azoteq.com/
+
+allOf:
+ - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ const: azoteq,iqs626a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ azoteq,suspend-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the power mode during suspend as follows:
+ 0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+ 1: Low power (all sensing at a reduced reporting rate)
+ 2: Ultra-low power (ULP channel proximity sensing)
+ 3: Halt (no sensing)
+
+ azoteq,clk-div:
+ type: boolean
+ description: Divides the device's core clock by a factor of 4.
+
+ azoteq,ulp-enable:
+ type: boolean
+ description:
+ Permits the device to automatically enter ultra-low-power mode from low-
+ power mode.
+
+ azoteq,ulp-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 3
+ description: |
+ Specifies the rate at which the trackpad, generic and Hall channels are
+ updated during ultra-low-power mode as follows:
+ 0: 8
+ 1: 13
+ 2: 28
+ 3: 54
+ 4: 89
+ 5: 135
+ 6: 190
+ 7: 256
+
+ azoteq,ati-band-disable:
+ type: boolean
+ description: Disables the ATI band check.
+
+ azoteq,ati-lp-only:
+ type: boolean
+ description: Limits automatic ATI to low-power mode.
+
+ azoteq,gpio3-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 1
+ description: |
+ Selects the channel or group of channels for which the GPIO3 pin
+ represents touch state as follows:
+ 0: None
+ 1: ULP channel
+ 2: Trackpad
+ 3: Trackpad
+ 4: Generic channel 0
+ 5: Generic channel 1
+ 6: Generic channel 2
+ 7: Hall channel
+
+ azoteq,reseed-select:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the event(s) that prompt the device to reseed (i.e. reset the
+ long-term average) of an associated channel as follows:
+ 0: None
+ 1: Proximity
+ 2: Proximity or touch
+ 3: Proximity, touch or deep touch
+
+ azoteq,thresh-extend:
+ type: boolean
+ description: Multiplies all touch and deep-touch thresholds by 4.
+
+ azoteq,tracking-enable:
+ type: boolean
+ description:
+ Enables all associated channels to track their respective reference
+ channels.
+
+ azoteq,reseed-offset:
+ type: boolean
+ description:
+ Applies an 8-count offset to all long-term averages upon either ATI or
+ reseed events.
+
+ azoteq,rate-np-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during normal-power mode.
+
+ azoteq,rate-lp-ms:
+ minimum: 0
+ maximum: 255
+ default: 150
+ description: Specifies the report rate (in ms) during low-power mode.
+
+ azoteq,rate-ulp-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+ azoteq,timeout-pwr-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 2560
+ description:
+ Specifies the length of time (in ms) to wait for an event before moving
+ from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
+ present) from low-power mode to ultra-low-power mode.
+
+ azoteq,timeout-lta-ms:
+ multipleOf: 512
+ minimum: 0
+ maximum: 130560
+ default: 40960
+ description:
+ Specifies the length of time (in ms) to wait before resetting the long-
+ term average of all channels. Specify the maximum timeout to disable it
+ altogether.
+
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+
+patternProperties:
+ "^ulp-0|generic-[0-2]|hall$":
+ type: object
+ description:
+ Represents a single sensing channel. A channel is active if defined and
+ inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the channel from participating in an ATI event that is
+ manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the channel from being reseeded if the long-term average
+ timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+ 2: VREG (generic channels only)
+
+ azoteq,linearize:
+ type: boolean
+ description:
+ Enables linearization of the channel's counts (generic and Hall
+ channels) or inverts the polarity of the channel's proximity or
+ touch states (ULP channel).
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the channel's long-term average is to freeze in the
+ presence of either increasing or decreasing counts, thereby permit-
+ ting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the channel.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ The default value is a function of the channel and the device's reset
+ user interface (RUI); reference the datasheet for further information
+ about the available RUI options.
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [75, 100, 150, 200]
+ description:
+ Specifies the channel's ATI base. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ description:
+ Specifies the channel's ATI target. The default value is a function
+ of the channel and the device's RUI.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 16
+ default: 0
+ description:
+ Specifies the degree to which the channel's charge cycle time is to
+ be increased, with 0 representing no increase. The maximum value is
+ limited to 4 in the case of the ULP channel, and the property is un-
+ available entirely in the case of the Hall channel.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ This property is unavailable in the case of the Hall channel.
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ description: |
+ Specifies the channel's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
+ generic channels only).
+
+ azoteq,proj-enable:
+ type: boolean
+ description: Enables projected-capacitance sensing (ULP channel only).
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode (ULP
+ and generic channels only).
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode (ULP and
+ generic channels only).
+
+ azoteq,filt-str-np-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during normal-power
+ mode (ULP and generic channels only).
+
+ azoteq,filt-str-lp-lta:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the long-term average filter strength during low-power mode
+ (ULP and generic channels only).
+
+ azoteq,rx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the CRX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-enable:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+ description:
+ Specifies the TX pin(s) associated with the channel.
+
+ This property is unavailable in the case of the Hall channel. The
+ default value is a function of the channel and the device's RUI.
+
+ azoteq,local-cap-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4]
+ default: 0
+ description: |
+ Specifies the capacitance to be added to the channel as follows:
+ 0: 0 pF
+ 1: 0.5 pF
+ 2: 1.0 pF
+ 3: 1.5 pF
+ 4: 2.0 pF
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,sense-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 8, 9, 12, 14, 15]
+ description: |
+ Specifies the channel's sensing mode as follows:
+ 0: Self capacitance
+ 1: Projected capacitance
+ 8: Self inductance
+ 9: Mutual inductance
+ 12: External
+ 14: Hall effect
+ 15: Temperature
+
+ This property is unavailable in the case of the ULP or Hall channels.
+ The default value is a function of the channel and the device's RUI.
+
+ azoteq,tx-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the inductive sensing excitation frequency as follows
+ (parenthesized numbers represent the frequency if 'azoteq,clk-div'
+ is present):
+ 0: 16 MHz (4 MHz)
+ 1: 8 MHz (2 MHz)
+ 2: 4 MHz (1 MHz)
+ 3: 2 MHz (500 kHz)
+
+ This property is unavailable in the case of the ULP or Hall channels.
+
+ azoteq,invert-enable:
+ type: boolean
+ description:
+ Inverts the polarity of the states reported for proximity, touch and
+ deep-touch events relative to their respective thresholds (generic
+ channels only).
+
+ azoteq,comp-disable:
+ type: boolean
+ description:
+ Disables compensation for the channel (generic channels only).
+
+ azoteq,static-enable:
+ type: boolean
+ description:
+ Enables the static front-end for the channel (generic channels only).
+
+ azoteq,assoc-select:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ minItems: 1
+ maxItems: 6
+ items:
+ enum:
+ - ulp-0
+ - trackpad-3x2
+ - trackpad-3x3
+ - generic-0
+ - generic-1
+ - generic-2
+ - hall
+ description:
+ Specifies the associated channels for which the channel serves as a
+ reference channel. By default, no channels are selected. This prop-
+ erty is only available for the generic channels.
+
+ azoteq,assoc-weight:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the channel's impact weight if it acts as an associated
+ channel (0 = 0% impact, 255 = 200% impact). This property is only
+ available for the generic channels.
+
+ patternProperties:
+ "^event-(prox|touch|deep)(-alt)?$":
+ type: object
+ description:
+ Represents a proximity, touch or deep-touch event reported by the
+ channel in response to a decrease in counts. Node names suffixed with
+ '-alt' instead correspond to an increase in counts.
+
+ By default, the long-term average tracks an increase in counts such
+ that only events corresponding to a decrease in counts are reported
+ (refer to the datasheet for more information).
+
+ Specify 'azoteq,dual-direction' to freeze the long-term average when
+ the counts increase or decrease such that events of either direction
+ can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+ vert the polarity of the states reported by the channel.
+
+ Complementary events (e.g. event-touch and event-touch-alt) can both
+ be present and specify different key or switch codes, but not differ-
+ ent thresholds or hysteresis (if applicable).
+
+ Proximity events are unavailable in the case of the Hall channel, and
+ deep-touch events are only available for the generic channels. Unless
+ otherwise specified, default values are a function of the channel and
+ the device's RUI.
+
+ properties:
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ description: Specifies the threshold for the event.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Specifies the hysteresis for the event (touch and deep-touch
+ events only).
+
+ linux,code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Numeric key or switch code associated with the event.
+
+ linux,input-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 5]
+ description:
+ Specifies whether the event is to be interpreted as a key (1) or
+ a switch (5). By default, Hall-channel events are interpreted as
+ switches and all others are interpreted as keys.
+
+ dependencies:
+ linux,input-type: ["linux,code"]
+
+ additionalProperties: false
+
+ dependencies:
+ azoteq,assoc-weight: ["azoteq,assoc-select"]
+
+ additionalProperties: false
+
+ "^trackpad-3x[2-3]$":
+ type: object
+ description:
+ Represents all channels associated with the trackpad. The channels are
+ collectively active if the trackpad is defined and inactive otherwise.
+
+ properties:
+ azoteq,ati-exclude:
+ type: boolean
+ description:
+ Prevents the trackpad channels from participating in an ATI event
+ that is manually triggered during initialization.
+
+ azoteq,reseed-disable:
+ type: boolean
+ description:
+ Prevents the trackpad channels from being reseeded if the long-term
+ average timeout (defined in 'azoteq,timeout-lta') expires.
+
+ azoteq,meas-cap-decrease:
+ type: boolean
+ description:
+ Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+ azoteq,rx-inactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ default: 0
+ description: |
+ Specifies how inactive CRX pins are to be terminated as follows:
+ 0: VSS
+ 1: Floating
+
+ azoteq,linearize:
+ type: boolean
+ description: Inverts the polarity of the trackpad's touch state.
+
+ azoteq,dual-direction:
+ type: boolean
+ description:
+ Specifies that the trackpad's long-term averages are to freeze in
+ the presence of either increasing or decreasing counts, thereby
+ permitting events to be reported in either direction.
+
+ azoteq,filt-disable:
+ type: boolean
+ description: Disables raw count filtering for the trackpad channels.
+
+ azoteq,ati-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's ATI mode as follows:
+ 0: Disabled
+ 1: Semi-partial
+ 2: Partial
+ 3: Full
+
+ azoteq,ati-base:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 45
+ maximum: 300
+ default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
+ description: Specifies each individual trackpad channel's ATI base.
+
+ azoteq,ati-target:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ multipleOf: 32
+ minimum: 0
+ maximum: 2016
+ default: 0
+ description: Specifies the trackpad's ATI target.
+
+ azoteq,cct-increase:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 4
+ default: 0
+ description:
+ Specifies the degree to which the trackpad's charge cycle time is to
+ be increased, with 0 representing no increase.
+
+ azoteq,proj-bias:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the bias current applied during projected-capacitance
+ sensing as follows:
+ 0: 2.5 uA
+ 1: 5 uA
+ 2: 10 uA
+ 3: 20 uA
+
+ azoteq,sense-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Specifies the trackpad's sensing frequency as follows (parenthesized
+ numbers represent the frequency if 'azoteq,clk-div' is present):
+ 0: 4 MHz (1 MHz)
+ 1: 2 MHz (500 kHz)
+ 2: 1 MHz (250 kHz)
+ 3: 500 kHz (125 kHz)
+
+ azoteq,ati-band-tighten:
+ type: boolean
+ description:
+ Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+ azoteq,thresh:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 255
+ default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
+ description:
+ Specifies each individual trackpad channel's touch threshold.
+
+ azoteq,hyst:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description: Specifies the trackpad's touch hysteresis.
+
+ azoteq,lta-update:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ default: 0
+ description: |
+ Specifies the update rate of the trackpad's long-term average during
+ ultra-low-power mode as follows:
+ 0: 2
+ 1: 4
+ 2: 8
+ 3: 16
+ 4: 32
+ 5: 64
+ 6: 128
+ 7: 255
+
+ azoteq,filt-str-trackpad:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: Specifies the trackpad coordinate filter strength.
+
+ azoteq,filt-str-np-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during normal-power mode.
+
+ azoteq,filt-str-lp-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Specifies the raw count filter strength during low-power mode.
+
+ linux,keycodes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 6
+ description: |
+ Specifies the numeric keycodes associated with each available gesture
+ in the following order (enter 0 for unused gestures):
+ 0: Positive flick or swipe in X direction
+ 1: Negative flick or swipe in X direction
+ 2: Positive flick or swipe in Y direction
+ 3: Negative flick or swipe in Y direction
+ 4: Tap
+ 5: Hold
+
+ azoteq,gesture-swipe:
+ type: boolean
+ description:
+ Directs the device to interpret axial gestures as a swipe (finger
+ remains on trackpad) instead of a flick (finger leaves trackpad).
+
+ azoteq,timeout-tap-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which a trackpad touch
+ must be released in order to be interpreted as a tap.
+
+ azoteq,timeout-swipe-ms:
+ multipleOf: 16
+ minimum: 0
+ maximum: 4080
+ default: 0
+ description:
+ Specifies the length of time (in ms) within which an axial gesture
+ must be completed in order to be interpreted as a flick or swipe.
+
+ azoteq,thresh-swipe:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 0
+ description:
+ Specifies the number of points across which an axial gesture must
+ travel in order to be interpreted as a flick or swipe.
+
+ dependencies:
+ azoteq,gesture-swipe: ["linux,keycodes"]
+ azoteq,timeout-tap-ms: ["linux,keycodes"]
+ azoteq,timeout-swipe-ms: ["linux,keycodes"]
+ azoteq,thresh-swipe: ["linux,keycodes"]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ iqs626a@44 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "azoteq,iqs626a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ azoteq,rate-np-ms = <16>;
+ azoteq,rate-lp-ms = <160>;
+
+ azoteq,timeout-pwr-ms = <2560>;
+ azoteq,timeout-lta-ms = <32768>;
+
+ ulp-0 {
+ azoteq,meas-cap-decrease;
+
+ azoteq,ati-base = <75>;
+ azoteq,ati-target = <1024>;
+
+ azoteq,rx-enable = <2>, <3>, <4>,
+ <5>, <6>, <7>;
+
+ event-prox {
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ trackpad-3x3 {
+ azoteq,filt-str-np-cnt = <1>;
+ azoteq,filt-str-lp-cnt = <1>;
+
+ azoteq,hyst = <4>;
+ azoteq,thresh = <35>, <40>, <40>,
+ <38>, <33>, <38>,
+ <35>, <35>, <35>;
+
+ azoteq,ati-mode = <3>;
+ azoteq,ati-base = <195>, <195>, <195>,
+ <195>, <195>, <195>,
+ <195>, <195>, <195>;
+ azoteq,ati-target = <512>;
+
+ azoteq,proj-bias = <1>;
+ azoteq,sense-freq = <2>;
+
+ linux,keycodes = <KEY_VOLUMEUP>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_NEXTSONG>,
+ <KEY_PREVIOUSSONG>,
+ <KEY_PLAYPAUSE>,
+ <KEY_STOPCD>;
+
+ azoteq,gesture-swipe;
+ azoteq,timeout-swipe-ms = <800>;
+ azoteq,timeout-tap-ms = <400>;
+ azoteq,thresh-swipe = <40>;
+ };
+
+ /*
+ * Preserve the default register settings for
+ * the temperature-tracking channel leveraged
+ * by reset user interface (RUI) 1.
+ *
+ * Scalar properties (e.g. ATI mode) are left
+ * untouched by simply omitting them; boolean
+ * properties must be specified explicitly as
+ * needed.
+ */
+ generic-2 {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+ azoteq,dual-direction;
+ azoteq,comp-disable;
+ azoteq,static-enable;
+ };
+
+ hall {
+ azoteq,reseed-disable;
+ azoteq,meas-cap-decrease;
+
+ event-touch {
+ linux,code = <SW_LID>;
+ };
+ };
+ };
+ };
+
+...
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 4/4] Input: Add support for Azoteq IQS626A
2021-03-01 23:49 [PATCH v3 0/4] Add support for Azoteq IQS626A Jeff LaBundy
` (2 preceding siblings ...)
2021-03-01 23:49 ` [PATCH v3 3/4] dt-bindings: input: Add bindings for Azoteq IQS626A Jeff LaBundy
@ 2021-03-01 23:49 ` Jeff LaBundy
2021-03-22 23:47 ` Dmitry Torokhov
3 siblings, 1 reply; 9+ messages in thread
From: Jeff LaBundy @ 2021-03-01 23:49 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt; +Cc: linux-input, devicetree, Jeff LaBundy
This patch adds support for the Azoteq IQS626A capacitive touch
controller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v3:
- Explicitly included bits.h
Changes in v2:
- Dropped guards for CONFIG_TOUCHSCREEN_PROPERTIES
drivers/input/misc/Kconfig | 11 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/iqs626a.c | 1838 ++++++++++++++++++++++++++++++++++
3 files changed, 1850 insertions(+)
create mode 100644 drivers/input/misc/iqs626a.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ad1b6c90bc4d..bbab23a58c59 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -752,6 +752,17 @@ config INPUT_IQS269A
To compile this driver as a module, choose M here: the
module will be called iqs269a.
+config INPUT_IQS626A
+ tristate "Azoteq IQS626A capacitive touch controller"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the Azoteq IQS626A capacitive
+ touch controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called iqs626a.
+
config INPUT_CMA3000
tristate "VTI CMA3000 Tri-axis accelerometer"
help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 7f202ba8f775..034c80a7ffa1 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
+obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
diff --git a/drivers/input/misc/iqs626a.c b/drivers/input/misc/iqs626a.c
new file mode 100644
index 000000000000..d57e996732cf
--- /dev/null
+++ b/drivers/input/misc/iqs626a.c
@@ -0,0 +1,1838 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS626A Capacitive Touch Controller
+ *
+ * Copyright (C) 2020 Jeff LaBundy <jeff@labundy.com>
+ *
+ * This driver registers up to 2 input devices: one representing capacitive or
+ * inductive keys as well as Hall-effect switches, and one for a trackpad that
+ * can express various gestures.
+ */
+
+#include <linux/bits.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define IQS626_VER_INFO 0x00
+#define IQS626_VER_INFO_PROD_NUM 0x51
+
+#define IQS626_SYS_FLAGS 0x02
+#define IQS626_SYS_FLAGS_SHOW_RESET BIT(15)
+#define IQS626_SYS_FLAGS_IN_ATI BIT(12)
+#define IQS626_SYS_FLAGS_PWR_MODE_MASK GENMASK(9, 8)
+#define IQS626_SYS_FLAGS_PWR_MODE_SHIFT 8
+
+#define IQS626_HALL_OUTPUT 0x23
+
+#define IQS626_SYS_SETTINGS 0x80
+#define IQS626_SYS_SETTINGS_CLK_DIV BIT(15)
+#define IQS626_SYS_SETTINGS_ULP_AUTO BIT(14)
+#define IQS626_SYS_SETTINGS_DIS_AUTO BIT(13)
+#define IQS626_SYS_SETTINGS_PWR_MODE_MASK GENMASK(12, 11)
+#define IQS626_SYS_SETTINGS_PWR_MODE_SHIFT 11
+#define IQS626_SYS_SETTINGS_PWR_MODE_MAX 3
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MASK GENMASK(10, 8)
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT 8
+#define IQS626_SYS_SETTINGS_ULP_UPDATE_MAX 7
+#define IQS626_SYS_SETTINGS_EVENT_MODE BIT(5)
+#define IQS626_SYS_SETTINGS_EVENT_MODE_LP BIT(4)
+#define IQS626_SYS_SETTINGS_REDO_ATI BIT(2)
+#define IQS626_SYS_SETTINGS_ACK_RESET BIT(0)
+
+#define IQS626_MISC_A_ATI_BAND_DISABLE BIT(7)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MASK GENMASK(6, 4)
+#define IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT 4
+#define IQS626_MISC_A_TPx_LTA_UPDATE_MAX 7
+#define IQS626_MISC_A_ATI_LP_ONLY BIT(3)
+#define IQS626_MISC_A_GPIO3_SELECT_MASK GENMASK(2, 0)
+#define IQS626_MISC_A_GPIO3_SELECT_MAX 7
+
+#define IQS626_EVENT_MASK_SYS BIT(6)
+#define IQS626_EVENT_MASK_GESTURE BIT(3)
+#define IQS626_EVENT_MASK_DEEP BIT(2)
+#define IQS626_EVENT_MASK_TOUCH BIT(1)
+#define IQS626_EVENT_MASK_PROX BIT(0)
+
+#define IQS626_RATE_NP_MS_MAX 255
+#define IQS626_RATE_LP_MS_MAX 255
+#define IQS626_RATE_ULP_MS_MAX 4080
+#define IQS626_TIMEOUT_PWR_MS_MAX 130560
+#define IQS626_TIMEOUT_LTA_MS_MAX 130560
+
+#define IQS626_MISC_B_RESEED_UI_SEL_MASK GENMASK(7, 6)
+#define IQS626_MISC_B_RESEED_UI_SEL_SHIFT 6
+#define IQS626_MISC_B_RESEED_UI_SEL_MAX 3
+#define IQS626_MISC_B_THRESH_EXTEND BIT(5)
+#define IQS626_MISC_B_TRACKING_UI_ENABLE BIT(4)
+#define IQS626_MISC_B_TPx_SWIPE BIT(3)
+#define IQS626_MISC_B_RESEED_OFFSET BIT(2)
+#define IQS626_MISC_B_FILT_STR_TPx GENMASK(1, 0)
+
+#define IQS626_THRESH_SWIPE_MAX 255
+#define IQS626_TIMEOUT_TAP_MS_MAX 4080
+#define IQS626_TIMEOUT_SWIPE_MS_MAX 4080
+
+#define IQS626_CHx_ENG_0_MEAS_CAP_SIZE BIT(7)
+#define IQS626_CHx_ENG_0_RX_TERM_VSS BIT(5)
+#define IQS626_CHx_ENG_0_LINEARIZE BIT(4)
+#define IQS626_CHx_ENG_0_DUAL_DIR BIT(3)
+#define IQS626_CHx_ENG_0_FILT_DISABLE BIT(2)
+#define IQS626_CHx_ENG_0_ATI_MODE_MASK GENMASK(1, 0)
+#define IQS626_CHx_ENG_0_ATI_MODE_MAX 3
+
+#define IQS626_CHx_ENG_1_CCT_HIGH_1 BIT(7)
+#define IQS626_CHx_ENG_1_CCT_HIGH_0 BIT(6)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MASK GENMASK(5, 4)
+#define IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT 4
+#define IQS626_CHx_ENG_1_PROJ_BIAS_MAX 3
+#define IQS626_CHx_ENG_1_CCT_ENABLE BIT(3)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MASK GENMASK(2, 1)
+#define IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT 1
+#define IQS626_CHx_ENG_1_SENSE_FREQ_MAX 3
+#define IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN BIT(0)
+
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MASK GENMASK(7, 6)
+#define IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT 6
+#define IQS626_CHx_ENG_2_LOCAL_CAP_MAX 3
+#define IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE BIT(5)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MASK GENMASK(3, 0)
+#define IQS626_CHx_ENG_2_SENSE_MODE_MAX 15
+
+#define IQS626_CHx_ENG_3_TX_FREQ_MASK GENMASK(5, 4)
+#define IQS626_CHx_ENG_3_TX_FREQ_SHIFT 4
+#define IQS626_CHx_ENG_3_TX_FREQ_MAX 3
+#define IQS626_CHx_ENG_3_INV_LOGIC BIT(0)
+
+#define IQS626_CHx_ENG_4_RX_TERM_VREG BIT(6)
+#define IQS626_CHx_ENG_4_CCT_LOW_1 BIT(5)
+#define IQS626_CHx_ENG_4_CCT_LOW_0 BIT(4)
+#define IQS626_CHx_ENG_4_COMP_DISABLE BIT(1)
+#define IQS626_CHx_ENG_4_STATIC_ENABLE BIT(0)
+
+#define IQS626_TPx_ATI_BASE_MIN 45
+#define IQS626_TPx_ATI_BASE_MAX 300
+#define IQS626_CHx_ATI_BASE_MASK GENMASK(7, 6)
+#define IQS626_CHx_ATI_BASE_75 0x00
+#define IQS626_CHx_ATI_BASE_100 0x40
+#define IQS626_CHx_ATI_BASE_150 0x80
+#define IQS626_CHx_ATI_BASE_200 0xC0
+#define IQS626_CHx_ATI_TARGET_MASK GENMASK(5, 0)
+#define IQS626_CHx_ATI_TARGET_MAX 2016
+
+#define IQS626_CHx_THRESH_MAX 255
+#define IQS626_CHx_HYST_DEEP_MASK GENMASK(7, 4)
+#define IQS626_CHx_HYST_DEEP_SHIFT 4
+#define IQS626_CHx_HYST_TOUCH_MASK GENMASK(3, 0)
+#define IQS626_CHx_HYST_MAX 15
+
+#define IQS626_FILT_STR_NP_TPx_MASK GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_TPx_SHIFT 6
+#define IQS626_FILT_STR_LP_TPx_MASK GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_TPx_SHIFT 4
+
+#define IQS626_FILT_STR_NP_CNT_MASK GENMASK(7, 6)
+#define IQS626_FILT_STR_NP_CNT_SHIFT 6
+#define IQS626_FILT_STR_LP_CNT_MASK GENMASK(5, 4)
+#define IQS626_FILT_STR_LP_CNT_SHIFT 4
+#define IQS626_FILT_STR_NP_LTA_MASK GENMASK(3, 2)
+#define IQS626_FILT_STR_NP_LTA_SHIFT 2
+#define IQS626_FILT_STR_LP_LTA_MASK GENMASK(1, 0)
+#define IQS626_FILT_STR_MAX 3
+
+#define IQS626_ULP_PROJ_ENABLE BIT(4)
+#define IQS626_GEN_WEIGHT_MAX 255
+
+#define IQS626_MAX_REG 0xFF
+
+#define IQS626_NUM_CH_TP_3 9
+#define IQS626_NUM_CH_TP_2 6
+#define IQS626_NUM_CH_GEN 3
+#define IQS626_NUM_CRx_TX 8
+
+#define IQS626_PWR_MODE_POLL_SLEEP_US 50000
+#define IQS626_PWR_MODE_POLL_TIMEOUT_US 500000
+
+#define iqs626_irq_wait() usleep_range(350, 400)
+
+enum iqs626_ch_id {
+ IQS626_CH_ULP_0,
+ IQS626_CH_TP_2,
+ IQS626_CH_TP_3,
+ IQS626_CH_GEN_0,
+ IQS626_CH_GEN_1,
+ IQS626_CH_GEN_2,
+ IQS626_CH_HALL,
+};
+
+enum iqs626_rx_inactive {
+ IQS626_RX_INACTIVE_VSS,
+ IQS626_RX_INACTIVE_FLOAT,
+ IQS626_RX_INACTIVE_VREG,
+};
+
+enum iqs626_st_offs {
+ IQS626_ST_OFFS_PROX,
+ IQS626_ST_OFFS_DIR,
+ IQS626_ST_OFFS_TOUCH,
+ IQS626_ST_OFFS_DEEP,
+};
+
+enum iqs626_th_offs {
+ IQS626_TH_OFFS_PROX,
+ IQS626_TH_OFFS_TOUCH,
+ IQS626_TH_OFFS_DEEP,
+};
+
+enum iqs626_event_id {
+ IQS626_EVENT_PROX_DN,
+ IQS626_EVENT_PROX_UP,
+ IQS626_EVENT_TOUCH_DN,
+ IQS626_EVENT_TOUCH_UP,
+ IQS626_EVENT_DEEP_DN,
+ IQS626_EVENT_DEEP_UP,
+};
+
+enum iqs626_gesture_id {
+ IQS626_GESTURE_FLICK_X_POS,
+ IQS626_GESTURE_FLICK_X_NEG,
+ IQS626_GESTURE_FLICK_Y_POS,
+ IQS626_GESTURE_FLICK_Y_NEG,
+ IQS626_GESTURE_TAP,
+ IQS626_GESTURE_HOLD,
+ IQS626_NUM_GESTURES,
+};
+
+struct iqs626_event_desc {
+ const char *name;
+ enum iqs626_st_offs st_offs;
+ enum iqs626_th_offs th_offs;
+ bool dir_up;
+ u8 mask;
+};
+
+static const struct iqs626_event_desc iqs626_events[] = {
+ [IQS626_EVENT_PROX_DN] = {
+ .name = "event-prox",
+ .st_offs = IQS626_ST_OFFS_PROX,
+ .th_offs = IQS626_TH_OFFS_PROX,
+ .mask = IQS626_EVENT_MASK_PROX,
+ },
+ [IQS626_EVENT_PROX_UP] = {
+ .name = "event-prox-alt",
+ .st_offs = IQS626_ST_OFFS_PROX,
+ .th_offs = IQS626_TH_OFFS_PROX,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_PROX,
+ },
+ [IQS626_EVENT_TOUCH_DN] = {
+ .name = "event-touch",
+ .st_offs = IQS626_ST_OFFS_TOUCH,
+ .th_offs = IQS626_TH_OFFS_TOUCH,
+ .mask = IQS626_EVENT_MASK_TOUCH,
+ },
+ [IQS626_EVENT_TOUCH_UP] = {
+ .name = "event-touch-alt",
+ .st_offs = IQS626_ST_OFFS_TOUCH,
+ .th_offs = IQS626_TH_OFFS_TOUCH,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_TOUCH,
+ },
+ [IQS626_EVENT_DEEP_DN] = {
+ .name = "event-deep",
+ .st_offs = IQS626_ST_OFFS_DEEP,
+ .th_offs = IQS626_TH_OFFS_DEEP,
+ .mask = IQS626_EVENT_MASK_DEEP,
+ },
+ [IQS626_EVENT_DEEP_UP] = {
+ .name = "event-deep-alt",
+ .st_offs = IQS626_ST_OFFS_DEEP,
+ .th_offs = IQS626_TH_OFFS_DEEP,
+ .dir_up = true,
+ .mask = IQS626_EVENT_MASK_DEEP,
+ },
+};
+
+struct iqs626_ver_info {
+ u8 prod_num;
+ u8 sw_num;
+ u8 hw_num;
+ u8 padding;
+} __packed;
+
+struct iqs626_flags {
+ __be16 system;
+ u8 gesture;
+ u8 padding_a;
+ u8 states[4];
+ u8 ref_active;
+ u8 padding_b;
+ u8 comp_min;
+ u8 comp_max;
+ u8 trackpad_x;
+ u8 trackpad_y;
+} __packed;
+
+struct iqs626_ch_reg_ulp {
+ u8 thresh[2];
+ u8 hyst;
+ u8 filter;
+ u8 engine[2];
+ u8 ati_target;
+ u8 padding;
+ __be16 ati_comp;
+ u8 rx_enable;
+ u8 tx_enable;
+} __packed;
+
+struct iqs626_ch_reg_tp {
+ u8 thresh;
+ u8 ati_base;
+ __be16 ati_comp;
+} __packed;
+
+struct iqs626_tp_grp_reg {
+ u8 hyst;
+ u8 ati_target;
+ u8 engine[2];
+ struct iqs626_ch_reg_tp ch_reg_tp[IQS626_NUM_CH_TP_3];
+} __packed;
+
+struct iqs626_ch_reg_gen {
+ u8 thresh[3];
+ u8 padding;
+ u8 hyst;
+ u8 ati_target;
+ __be16 ati_comp;
+ u8 engine[5];
+ u8 filter;
+ u8 rx_enable;
+ u8 tx_enable;
+ u8 assoc_select;
+ u8 assoc_weight;
+} __packed;
+
+struct iqs626_ch_reg_hall {
+ u8 engine;
+ u8 thresh;
+ u8 hyst;
+ u8 ati_target;
+ __be16 ati_comp;
+} __packed;
+
+struct iqs626_sys_reg {
+ __be16 general;
+ u8 misc_a;
+ u8 event_mask;
+ u8 active;
+ u8 reseed;
+ u8 rate_np;
+ u8 rate_lp;
+ u8 rate_ulp;
+ u8 timeout_pwr;
+ u8 timeout_rdy;
+ u8 timeout_lta;
+ u8 misc_b;
+ u8 thresh_swipe;
+ u8 timeout_tap;
+ u8 timeout_swipe;
+ u8 redo_ati;
+ u8 padding;
+ struct iqs626_ch_reg_ulp ch_reg_ulp;
+ struct iqs626_tp_grp_reg tp_grp_reg;
+ struct iqs626_ch_reg_gen ch_reg_gen[IQS626_NUM_CH_GEN];
+ struct iqs626_ch_reg_hall ch_reg_hall;
+} __packed;
+
+struct iqs626_channel_desc {
+ const char *name;
+ int num_ch;
+ u8 active;
+ bool events[ARRAY_SIZE(iqs626_events)];
+};
+
+static const struct iqs626_channel_desc iqs626_channels[] = {
+ [IQS626_CH_ULP_0] = {
+ .name = "ulp-0",
+ .num_ch = 1,
+ .active = BIT(0),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ },
+ },
+ [IQS626_CH_TP_2] = {
+ .name = "trackpad-3x2",
+ .num_ch = IQS626_NUM_CH_TP_2,
+ .active = BIT(1),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ },
+ },
+ [IQS626_CH_TP_3] = {
+ .name = "trackpad-3x3",
+ .num_ch = IQS626_NUM_CH_TP_3,
+ .active = BIT(2) | BIT(1),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ },
+ },
+ [IQS626_CH_GEN_0] = {
+ .name = "generic-0",
+ .num_ch = 1,
+ .active = BIT(4),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_GEN_1] = {
+ .name = "generic-1",
+ .num_ch = 1,
+ .active = BIT(5),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_GEN_2] = {
+ .name = "generic-2",
+ .num_ch = 1,
+ .active = BIT(6),
+ .events = {
+ [IQS626_EVENT_PROX_DN] = true,
+ [IQS626_EVENT_PROX_UP] = true,
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ [IQS626_EVENT_DEEP_DN] = true,
+ [IQS626_EVENT_DEEP_UP] = true,
+ },
+ },
+ [IQS626_CH_HALL] = {
+ .name = "hall",
+ .num_ch = 1,
+ .active = BIT(7),
+ .events = {
+ [IQS626_EVENT_TOUCH_DN] = true,
+ [IQS626_EVENT_TOUCH_UP] = true,
+ },
+ },
+};
+
+struct iqs626_private {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct iqs626_sys_reg sys_reg;
+ struct completion ati_done;
+ struct input_dev *keypad;
+ struct input_dev *trackpad;
+ struct touchscreen_properties prop;
+ unsigned int kp_type[ARRAY_SIZE(iqs626_channels)]
+ [ARRAY_SIZE(iqs626_events)];
+ unsigned int kp_code[ARRAY_SIZE(iqs626_channels)]
+ [ARRAY_SIZE(iqs626_events)];
+ unsigned int tp_code[IQS626_NUM_GESTURES];
+ unsigned int suspend_mode;
+};
+
+static int iqs626_parse_events(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ const struct fwnode_handle *ev_node;
+ const char *ev_name;
+ u8 *thresh, *hyst;
+ unsigned int thresh_tp[IQS626_NUM_CH_TP_3];
+ unsigned int val;
+ int num_ch = iqs626_channels[ch_id].num_ch;
+ int error, i, j;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ thresh = sys_reg->ch_reg_ulp.thresh;
+ hyst = &sys_reg->ch_reg_ulp.hyst;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ thresh = &sys_reg->tp_grp_reg.ch_reg_tp[0].thresh;
+ hyst = &sys_reg->tp_grp_reg.hyst;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ thresh = sys_reg->ch_reg_gen[i].thresh;
+ hyst = &sys_reg->ch_reg_gen[i].hyst;
+ break;
+
+ case IQS626_CH_HALL:
+ thresh = &sys_reg->ch_reg_hall.thresh;
+ hyst = &sys_reg->ch_reg_hall.hyst;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_events); i++) {
+ if (!iqs626_channels[ch_id].events[i])
+ continue;
+
+ if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3) {
+ /*
+ * Trackpad touch events are simply described under the
+ * trackpad child node.
+ */
+ ev_node = ch_node;
+ } else {
+ ev_name = iqs626_events[i].name;
+ ev_node = fwnode_get_named_child_node(ch_node, ev_name);
+ if (!ev_node)
+ continue;
+
+ if (!fwnode_property_read_u32(ev_node, "linux,code",
+ &val)) {
+ iqs626->kp_code[ch_id][i] = val;
+
+ if (fwnode_property_read_u32(ev_node,
+ "linux,input-type",
+ &val)) {
+ if (ch_id == IQS626_CH_HALL)
+ val = EV_SW;
+ else
+ val = EV_KEY;
+ }
+
+ if (val != EV_KEY && val != EV_SW) {
+ dev_err(&client->dev,
+ "Invalid input type: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ iqs626->kp_type[ch_id][i] = val;
+
+ sys_reg->event_mask &= ~iqs626_events[i].mask;
+ }
+ }
+
+ if (!fwnode_property_read_u32(ev_node, "azoteq,hyst", &val)) {
+ if (val > IQS626_CHx_HYST_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel hysteresis: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ if (i == IQS626_EVENT_DEEP_DN ||
+ i == IQS626_EVENT_DEEP_UP) {
+ *hyst &= ~IQS626_CHx_HYST_DEEP_MASK;
+ *hyst |= (val << IQS626_CHx_HYST_DEEP_SHIFT);
+ } else if (i == IQS626_EVENT_TOUCH_DN ||
+ i == IQS626_EVENT_TOUCH_UP) {
+ *hyst &= ~IQS626_CHx_HYST_TOUCH_MASK;
+ *hyst |= val;
+ }
+ }
+
+ if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+ !fwnode_property_read_u32(ev_node, "azoteq,thresh", &val)) {
+ if (val > IQS626_CHx_THRESH_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ if (ch_id == IQS626_CH_HALL)
+ *thresh = val;
+ else
+ *(thresh + iqs626_events[i].th_offs) = val;
+
+ continue;
+ }
+
+ if (!fwnode_property_present(ev_node, "azoteq,thresh"))
+ continue;
+
+ error = fwnode_property_read_u32_array(ev_node, "azoteq,thresh",
+ thresh_tp, num_ch);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel thresholds: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ for (j = 0; j < num_ch; j++) {
+ if (thresh_tp[j] > IQS626_CHx_THRESH_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), thresh_tp[j]);
+ return -EINVAL;
+ }
+
+ sys_reg->tp_grp_reg.ch_reg_tp[j].thresh = thresh_tp[j];
+ }
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_ati_target(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ unsigned int ati_base[IQS626_NUM_CH_TP_3];
+ unsigned int val;
+ u8 *ati_target;
+ int num_ch = iqs626_channels[ch_id].num_ch;
+ int error, i;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ ati_target = &sys_reg->ch_reg_ulp.ati_target;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ ati_target = &sys_reg->tp_grp_reg.ati_target;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ ati_target = &sys_reg->ch_reg_gen[i].ati_target;
+ break;
+
+ case IQS626_CH_HALL:
+ ati_target = &sys_reg->ch_reg_hall.ati_target;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,ati-target", &val)) {
+ if (val > IQS626_CHx_ATI_TARGET_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI target: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *ati_target &= ~IQS626_CHx_ATI_TARGET_MASK;
+ *ati_target |= (val / 32);
+ }
+
+ if (ch_id != IQS626_CH_TP_2 && ch_id != IQS626_CH_TP_3 &&
+ !fwnode_property_read_u32(ch_node, "azoteq,ati-base", &val)) {
+ switch (val) {
+ case 75:
+ val = IQS626_CHx_ATI_BASE_75;
+ break;
+
+ case 100:
+ val = IQS626_CHx_ATI_BASE_100;
+ break;
+
+ case 150:
+ val = IQS626_CHx_ATI_BASE_150;
+ break;
+
+ case 200:
+ val = IQS626_CHx_ATI_BASE_200;
+ break;
+
+ default:
+ dev_err(&client->dev,
+ "Invalid %s channel ATI base: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *ati_target &= ~IQS626_CHx_ATI_BASE_MASK;
+ *ati_target |= val;
+
+ return 0;
+ }
+
+ if (!fwnode_property_present(ch_node, "azoteq,ati-base"))
+ return 0;
+
+ error = fwnode_property_read_u32_array(ch_node, "azoteq,ati-base",
+ ati_base, num_ch);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel ATI bases: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ for (i = 0; i < num_ch; i++) {
+ if (ati_base[i] < IQS626_TPx_ATI_BASE_MIN ||
+ ati_base[i] > IQS626_TPx_ATI_BASE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI base: %u\n",
+ fwnode_get_name(ch_node), ati_base[i]);
+ return -EINVAL;
+ }
+
+ ati_base[i] -= IQS626_TPx_ATI_BASE_MIN;
+ sys_reg->tp_grp_reg.ch_reg_tp[i].ati_base = ati_base[i];
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_pins(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ const char *propname, u8 *enable)
+{
+ struct i2c_client *client = iqs626->client;
+ unsigned int val[IQS626_NUM_CRx_TX];
+ int error, count, i;
+
+ if (!fwnode_property_present(ch_node, propname))
+ return 0;
+
+ count = fwnode_property_count_u32(ch_node, propname);
+ if (count > IQS626_NUM_CRx_TX) {
+ dev_err(&client->dev,
+ "Too many %s channel CRX/TX pins present\n",
+ fwnode_get_name(ch_node));
+ return -EINVAL;
+ } else if (count < 0) {
+ dev_err(&client->dev,
+ "Failed to count %s channel CRX/TX pins: %d\n",
+ fwnode_get_name(ch_node), count);
+ return count;
+ }
+
+ error = fwnode_property_read_u32_array(ch_node, propname, val, count);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s channel CRX/TX pins: %d\n",
+ fwnode_get_name(ch_node), error);
+ return error;
+ }
+
+ *enable = 0;
+
+ for (i = 0; i < count; i++) {
+ if (val[i] >= IQS626_NUM_CRx_TX) {
+ dev_err(&client->dev,
+ "Invalid %s channel CRX/TX pin: %u\n",
+ fwnode_get_name(ch_node), val[i]);
+ return -EINVAL;
+ }
+
+ *enable |= BIT(val[i]);
+ }
+
+ return 0;
+}
+
+static int iqs626_parse_trackpad(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ u8 *hyst = &sys_reg->tp_grp_reg.hyst;
+ unsigned int val;
+ int error, count;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,lta-update", &val)) {
+ if (val > IQS626_MISC_A_TPx_LTA_UPDATE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel update rate: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_TPx_LTA_UPDATE_MASK;
+ sys_reg->misc_a |= (val << IQS626_MISC_A_TPx_LTA_UPDATE_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-trackpad",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_FILT_STR_TPx;
+ sys_reg->misc_b |= val;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *hyst &= ~IQS626_FILT_STR_NP_TPx_MASK;
+ *hyst |= (val << IQS626_FILT_STR_NP_TPx_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *hyst &= ~IQS626_FILT_STR_LP_TPx_MASK;
+ *hyst |= (val << IQS626_FILT_STR_LP_TPx_SHIFT);
+ }
+
+ if (!fwnode_property_present(ch_node, "linux,keycodes"))
+ return 0;
+
+ count = fwnode_property_count_u32(ch_node, "linux,keycodes");
+ if (count > IQS626_NUM_GESTURES) {
+ dev_err(&client->dev, "Too many keycodes present\n");
+ return -EINVAL;
+ } else if (count < 0) {
+ dev_err(&client->dev, "Failed to count keycodes: %d\n", count);
+ return count;
+ }
+
+ error = fwnode_property_read_u32_array(ch_node, "linux,keycodes",
+ iqs626->tp_code, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read keycodes: %d\n", error);
+ return error;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_TPx_SWIPE;
+ if (fwnode_property_present(ch_node, "azoteq,gesture-swipe"))
+ sys_reg->misc_b |= IQS626_MISC_B_TPx_SWIPE;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-tap-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_TAP_MS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel timeout: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_tap = val / 16;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,timeout-swipe-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_SWIPE_MS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel timeout: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_swipe = val / 16;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,thresh-swipe",
+ &val)) {
+ if (val > IQS626_THRESH_SWIPE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel threshold: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ sys_reg->thresh_swipe = val;
+ }
+
+ sys_reg->event_mask &= ~IQS626_EVENT_MASK_GESTURE;
+
+ return 0;
+}
+
+static int iqs626_parse_channel(struct iqs626_private *iqs626,
+ const struct fwnode_handle *ch_node,
+ enum iqs626_ch_id ch_id)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ u8 *engine, *filter, *rx_enable, *tx_enable;
+ u8 *assoc_select, *assoc_weight;
+ unsigned int val;
+ int error, i;
+
+ switch (ch_id) {
+ case IQS626_CH_ULP_0:
+ engine = sys_reg->ch_reg_ulp.engine;
+ break;
+
+ case IQS626_CH_TP_2:
+ case IQS626_CH_TP_3:
+ engine = sys_reg->tp_grp_reg.engine;
+ break;
+
+ case IQS626_CH_GEN_0:
+ case IQS626_CH_GEN_1:
+ case IQS626_CH_GEN_2:
+ i = ch_id - IQS626_CH_GEN_0;
+ engine = sys_reg->ch_reg_gen[i].engine;
+ break;
+
+ case IQS626_CH_HALL:
+ engine = &sys_reg->ch_reg_hall.engine;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *engine |= IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+ if (fwnode_property_present(ch_node, "azoteq,meas-cap-decrease"))
+ *engine &= ~IQS626_CHx_ENG_0_MEAS_CAP_SIZE;
+
+ *engine |= IQS626_CHx_ENG_0_RX_TERM_VSS;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,rx-inactive", &val)) {
+ switch (val) {
+ case IQS626_RX_INACTIVE_VSS:
+ break;
+
+ case IQS626_RX_INACTIVE_FLOAT:
+ *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2)
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_RX_TERM_VREG;
+ break;
+
+ case IQS626_RX_INACTIVE_VREG:
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2) {
+ *engine &= ~IQS626_CHx_ENG_0_RX_TERM_VSS;
+ *(engine + 4) |= IQS626_CHx_ENG_4_RX_TERM_VREG;
+ break;
+ }
+ fallthrough;
+
+ default:
+ dev_err(&client->dev,
+ "Invalid %s channel CRX pin termination: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+ }
+
+ *engine &= ~IQS626_CHx_ENG_0_LINEARIZE;
+ if (fwnode_property_present(ch_node, "azoteq,linearize"))
+ *engine |= IQS626_CHx_ENG_0_LINEARIZE;
+
+ *engine &= ~IQS626_CHx_ENG_0_DUAL_DIR;
+ if (fwnode_property_present(ch_node, "azoteq,dual-direction"))
+ *engine |= IQS626_CHx_ENG_0_DUAL_DIR;
+
+ *engine &= ~IQS626_CHx_ENG_0_FILT_DISABLE;
+ if (fwnode_property_present(ch_node, "azoteq,filt-disable"))
+ *engine |= IQS626_CHx_ENG_0_FILT_DISABLE;
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,ati-mode", &val)) {
+ if (val > IQS626_CHx_ENG_0_ATI_MODE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel ATI mode: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *engine &= ~IQS626_CHx_ENG_0_ATI_MODE_MASK;
+ *engine |= val;
+ }
+
+ if (ch_id == IQS626_CH_HALL)
+ return 0;
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_ENABLE;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,cct-increase",
+ &val) && val) {
+ unsigned int orig_val = val--;
+
+ /*
+ * In the case of the generic channels, the charge cycle time
+ * field doubles in size and straddles two separate registers.
+ */
+ if (ch_id == IQS626_CH_GEN_0 ||
+ ch_id == IQS626_CH_GEN_1 ||
+ ch_id == IQS626_CH_GEN_2) {
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_1;
+ if (val & BIT(1))
+ *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_1;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_CCT_LOW_0;
+ if (val & BIT(0))
+ *(engine + 4) |= IQS626_CHx_ENG_4_CCT_LOW_0;
+
+ val >>= 2;
+ }
+
+ if (val & ~GENMASK(1, 0)) {
+ dev_err(&client->dev,
+ "Invalid %s channel charge cycle time: %u\n",
+ fwnode_get_name(ch_node), orig_val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_1;
+ if (val & BIT(1))
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_1;
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_CCT_HIGH_0;
+ if (val & BIT(0))
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_HIGH_0;
+
+ *(engine + 1) |= IQS626_CHx_ENG_1_CCT_ENABLE;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,proj-bias", &val)) {
+ if (val > IQS626_CHx_ENG_1_PROJ_BIAS_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel bias current: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_PROJ_BIAS_MASK;
+ *(engine + 1) |= (val << IQS626_CHx_ENG_1_PROJ_BIAS_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,sense-freq", &val)) {
+ if (val > IQS626_CHx_ENG_1_SENSE_FREQ_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel sensing frequency: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_SENSE_FREQ_MASK;
+ *(engine + 1) |= (val << IQS626_CHx_ENG_1_SENSE_FREQ_SHIFT);
+ }
+
+ *(engine + 1) &= ~IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+ if (fwnode_property_present(ch_node, "azoteq,ati-band-tighten"))
+ *(engine + 1) |= IQS626_CHx_ENG_1_ATI_BAND_TIGHTEN;
+
+ if (ch_id == IQS626_CH_TP_2 || ch_id == IQS626_CH_TP_3)
+ return iqs626_parse_trackpad(iqs626, ch_node);
+
+ if (ch_id == IQS626_CH_ULP_0) {
+ sys_reg->ch_reg_ulp.hyst &= ~IQS626_ULP_PROJ_ENABLE;
+ if (fwnode_property_present(ch_node, "azoteq,proj-enable"))
+ sys_reg->ch_reg_ulp.hyst |= IQS626_ULP_PROJ_ENABLE;
+
+ filter = &sys_reg->ch_reg_ulp.filter;
+
+ rx_enable = &sys_reg->ch_reg_ulp.rx_enable;
+ tx_enable = &sys_reg->ch_reg_ulp.tx_enable;
+ } else {
+ i = ch_id - IQS626_CH_GEN_0;
+ filter = &sys_reg->ch_reg_gen[i].filter;
+
+ rx_enable = &sys_reg->ch_reg_gen[i].rx_enable;
+ tx_enable = &sys_reg->ch_reg_gen[i].tx_enable;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_NP_CNT_MASK;
+ *filter |= (val << IQS626_FILT_STR_NP_CNT_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-cnt",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_LP_CNT_MASK;
+ *filter |= (val << IQS626_FILT_STR_LP_CNT_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-np-lta",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_NP_LTA_MASK;
+ *filter |= (val << IQS626_FILT_STR_NP_LTA_SHIFT);
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,filt-str-lp-lta",
+ &val)) {
+ if (val > IQS626_FILT_STR_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel filter strength: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *filter &= ~IQS626_FILT_STR_LP_LTA_MASK;
+ *filter |= val;
+ }
+
+ error = iqs626_parse_pins(iqs626, ch_node, "azoteq,rx-enable",
+ rx_enable);
+ if (error)
+ return error;
+
+ error = iqs626_parse_pins(iqs626, ch_node, "azoteq,tx-enable",
+ tx_enable);
+ if (error)
+ return error;
+
+ if (ch_id == IQS626_CH_ULP_0)
+ return 0;
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+ if (!fwnode_property_read_u32(ch_node, "azoteq,local-cap-size",
+ &val) && val) {
+ unsigned int orig_val = val--;
+
+ if (val > IQS626_CHx_ENG_2_LOCAL_CAP_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel local cap. size: %u\n",
+ fwnode_get_name(ch_node), orig_val);
+ return -EINVAL;
+ }
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_LOCAL_CAP_MASK;
+ *(engine + 2) |= (val << IQS626_CHx_ENG_2_LOCAL_CAP_SHIFT);
+
+ *(engine + 2) |= IQS626_CHx_ENG_2_LOCAL_CAP_ENABLE;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,sense-mode", &val)) {
+ if (val > IQS626_CHx_ENG_2_SENSE_MODE_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel sensing mode: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 2) &= ~IQS626_CHx_ENG_2_SENSE_MODE_MASK;
+ *(engine + 2) |= val;
+ }
+
+ if (!fwnode_property_read_u32(ch_node, "azoteq,tx-freq", &val)) {
+ if (val > IQS626_CHx_ENG_3_TX_FREQ_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel excitation frequency: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *(engine + 3) &= ~IQS626_CHx_ENG_3_TX_FREQ_MASK;
+ *(engine + 3) |= (val << IQS626_CHx_ENG_3_TX_FREQ_SHIFT);
+ }
+
+ *(engine + 3) &= ~IQS626_CHx_ENG_3_INV_LOGIC;
+ if (fwnode_property_present(ch_node, "azoteq,invert-enable"))
+ *(engine + 3) |= IQS626_CHx_ENG_3_INV_LOGIC;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_COMP_DISABLE;
+ if (fwnode_property_present(ch_node, "azoteq,comp-disable"))
+ *(engine + 4) |= IQS626_CHx_ENG_4_COMP_DISABLE;
+
+ *(engine + 4) &= ~IQS626_CHx_ENG_4_STATIC_ENABLE;
+ if (fwnode_property_present(ch_node, "azoteq,static-enable"))
+ *(engine + 4) |= IQS626_CHx_ENG_4_STATIC_ENABLE;
+
+ i = ch_id - IQS626_CH_GEN_0;
+ assoc_select = &sys_reg->ch_reg_gen[i].assoc_select;
+ assoc_weight = &sys_reg->ch_reg_gen[i].assoc_weight;
+
+ *assoc_select = 0;
+ if (!fwnode_property_present(ch_node, "azoteq,assoc-select"))
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (fwnode_property_match_string(ch_node, "azoteq,assoc-select",
+ iqs626_channels[i].name) < 0)
+ continue;
+
+ *assoc_select |= iqs626_channels[i].active;
+ }
+
+ if (fwnode_property_read_u32(ch_node, "azoteq,assoc-weight", &val))
+ return 0;
+
+ if (val > IQS626_GEN_WEIGHT_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s channel associated weight: %u\n",
+ fwnode_get_name(ch_node), val);
+ return -EINVAL;
+ }
+
+ *assoc_weight = val;
+
+ return 0;
+}
+
+static int iqs626_parse_prop(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ struct fwnode_handle *ch_node;
+ unsigned int val;
+ int error, i;
+ u16 general;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,suspend-mode",
+ &val)) {
+ if (val > IQS626_SYS_SETTINGS_PWR_MODE_MAX) {
+ dev_err(&client->dev, "Invalid suspend mode: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ iqs626->suspend_mode = val;
+ }
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_SYS_SETTINGS, sys_reg,
+ sizeof(*sys_reg));
+ if (error)
+ return error;
+
+ general = be16_to_cpu(sys_reg->general);
+ general &= IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+
+ if (device_property_present(&client->dev, "azoteq,clk-div"))
+ general |= IQS626_SYS_SETTINGS_CLK_DIV;
+
+ if (device_property_present(&client->dev, "azoteq,ulp-enable"))
+ general |= IQS626_SYS_SETTINGS_ULP_AUTO;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,ulp-update",
+ &val)) {
+ if (val > IQS626_SYS_SETTINGS_ULP_UPDATE_MAX) {
+ dev_err(&client->dev, "Invalid update rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ general &= ~IQS626_SYS_SETTINGS_ULP_UPDATE_MASK;
+ general |= (val << IQS626_SYS_SETTINGS_ULP_UPDATE_SHIFT);
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_ATI_BAND_DISABLE;
+ if (device_property_present(&client->dev, "azoteq,ati-band-disable"))
+ sys_reg->misc_a |= IQS626_MISC_A_ATI_BAND_DISABLE;
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_ATI_LP_ONLY;
+ if (device_property_present(&client->dev, "azoteq,ati-lp-only"))
+ sys_reg->misc_a |= IQS626_MISC_A_ATI_LP_ONLY;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,gpio3-select",
+ &val)) {
+ if (val > IQS626_MISC_A_GPIO3_SELECT_MAX) {
+ dev_err(&client->dev, "Invalid GPIO3 selection: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_a &= ~IQS626_MISC_A_GPIO3_SELECT_MASK;
+ sys_reg->misc_a |= val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,reseed-select",
+ &val)) {
+ if (val > IQS626_MISC_B_RESEED_UI_SEL_MAX) {
+ dev_err(&client->dev, "Invalid reseed selection: %u\n",
+ val);
+ return -EINVAL;
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_UI_SEL_MASK;
+ sys_reg->misc_b |= (val << IQS626_MISC_B_RESEED_UI_SEL_SHIFT);
+ }
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_THRESH_EXTEND;
+ if (device_property_present(&client->dev, "azoteq,thresh-extend"))
+ sys_reg->misc_b |= IQS626_MISC_B_THRESH_EXTEND;
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_TRACKING_UI_ENABLE;
+ if (device_property_present(&client->dev, "azoteq,tracking-enable"))
+ sys_reg->misc_b |= IQS626_MISC_B_TRACKING_UI_ENABLE;
+
+ sys_reg->misc_b &= ~IQS626_MISC_B_RESEED_OFFSET;
+ if (device_property_present(&client->dev, "azoteq,reseed-offset"))
+ sys_reg->misc_b |= IQS626_MISC_B_RESEED_OFFSET;
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-np-ms",
+ &val)) {
+ if (val > IQS626_RATE_NP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_np = val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-lp-ms",
+ &val)) {
+ if (val > IQS626_RATE_LP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_lp = val;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,rate-ulp-ms",
+ &val)) {
+ if (val > IQS626_RATE_ULP_MS_MAX) {
+ dev_err(&client->dev, "Invalid report rate: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->rate_ulp = val / 16;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,timeout-pwr-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_PWR_MS_MAX) {
+ dev_err(&client->dev, "Invalid timeout: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_pwr = val / 512;
+ }
+
+ if (!device_property_read_u32(&client->dev, "azoteq,timeout-lta-ms",
+ &val)) {
+ if (val > IQS626_TIMEOUT_LTA_MS_MAX) {
+ dev_err(&client->dev, "Invalid timeout: %u\n", val);
+ return -EINVAL;
+ }
+
+ sys_reg->timeout_lta = val / 512;
+ }
+
+ sys_reg->event_mask = ~((u8)IQS626_EVENT_MASK_SYS);
+ sys_reg->redo_ati = 0;
+
+ sys_reg->reseed = 0;
+ sys_reg->active = 0;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ ch_node = device_get_named_child_node(&client->dev,
+ iqs626_channels[i].name);
+ if (!ch_node)
+ continue;
+
+ error = iqs626_parse_channel(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ error = iqs626_parse_ati_target(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ error = iqs626_parse_events(iqs626, ch_node, i);
+ if (error)
+ return error;
+
+ if (!fwnode_property_present(ch_node, "azoteq,ati-exclude"))
+ sys_reg->redo_ati |= iqs626_channels[i].active;
+
+ if (!fwnode_property_present(ch_node, "azoteq,reseed-disable"))
+ sys_reg->reseed |= iqs626_channels[i].active;
+
+ sys_reg->active |= iqs626_channels[i].active;
+ }
+
+ general |= IQS626_SYS_SETTINGS_EVENT_MODE;
+
+ /*
+ * Enable streaming during normal-power mode if the trackpad is used to
+ * report raw coordinates instead of gestures. In that case, the device
+ * returns to event mode during low-power mode.
+ */
+ if (sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active &&
+ sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE)
+ general |= IQS626_SYS_SETTINGS_EVENT_MODE_LP;
+
+ general |= IQS626_SYS_SETTINGS_REDO_ATI;
+ general |= IQS626_SYS_SETTINGS_ACK_RESET;
+
+ sys_reg->general = cpu_to_be16(general);
+
+ error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+ &iqs626->sys_reg, sizeof(iqs626->sys_reg));
+ if (error)
+ return error;
+
+ iqs626_irq_wait();
+
+ return 0;
+}
+
+static int iqs626_input_init(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ int error, i, j;
+
+ iqs626->keypad = devm_input_allocate_device(&client->dev);
+ if (!iqs626->keypad)
+ return -ENOMEM;
+
+ iqs626->keypad->keycodemax = ARRAY_SIZE(iqs626->kp_code);
+ iqs626->keypad->keycode = iqs626->kp_code;
+ iqs626->keypad->keycodesize = sizeof(**iqs626->kp_code);
+
+ iqs626->keypad->name = "iqs626a_keypad";
+ iqs626->keypad->id.bustype = BUS_I2C;
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (!(sys_reg->active & iqs626_channels[i].active))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+ if (!iqs626->kp_type[i][j])
+ continue;
+
+ input_set_capability(iqs626->keypad,
+ iqs626->kp_type[i][j],
+ iqs626->kp_code[i][j]);
+ }
+ }
+
+ if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+ return 0;
+
+ iqs626->trackpad = devm_input_allocate_device(&client->dev);
+ if (!iqs626->trackpad)
+ return -ENOMEM;
+
+ iqs626->trackpad->keycodemax = ARRAY_SIZE(iqs626->tp_code);
+ iqs626->trackpad->keycode = iqs626->tp_code;
+ iqs626->trackpad->keycodesize = sizeof(*iqs626->tp_code);
+
+ iqs626->trackpad->name = "iqs626a_trackpad";
+ iqs626->trackpad->id.bustype = BUS_I2C;
+
+ /*
+ * Present the trackpad as a traditional pointing device if no gestures
+ * have been mapped to a keycode.
+ */
+ if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+ u8 tp_mask = iqs626_channels[IQS626_CH_TP_3].active;
+
+ input_set_capability(iqs626->trackpad, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(iqs626->trackpad, ABS_Y, 0, 255, 0, 0);
+
+ if ((sys_reg->active & tp_mask) == tp_mask)
+ input_set_abs_params(iqs626->trackpad,
+ ABS_X, 0, 255, 0, 0);
+ else
+ input_set_abs_params(iqs626->trackpad,
+ ABS_X, 0, 128, 0, 0);
+
+ touchscreen_parse_properties(iqs626->trackpad, false,
+ &iqs626->prop);
+ } else {
+ for (i = 0; i < IQS626_NUM_GESTURES; i++)
+ if (iqs626->tp_code[i] != KEY_RESERVED)
+ input_set_capability(iqs626->trackpad, EV_KEY,
+ iqs626->tp_code[i]);
+ }
+
+ error = input_register_device(iqs626->trackpad);
+ if (error)
+ dev_err(&client->dev, "Failed to register trackpad: %d\n",
+ error);
+
+ return error;
+}
+
+static int iqs626_report(struct iqs626_private *iqs626)
+{
+ struct iqs626_sys_reg *sys_reg = &iqs626->sys_reg;
+ struct i2c_client *client = iqs626->client;
+ struct iqs626_flags flags;
+ __le16 hall_output;
+ int error, i, j;
+ u8 state;
+ u8 *dir_mask = &flags.states[IQS626_ST_OFFS_DIR];
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_SYS_FLAGS, &flags,
+ sizeof(flags));
+ if (error) {
+ dev_err(&client->dev, "Failed to read device status: %d\n",
+ error);
+ return error;
+ }
+
+ /*
+ * The device resets itself if its own watchdog bites, which can happen
+ * in the event of an I2C communication error. In this case, the device
+ * asserts a SHOW_RESET interrupt and all registers must be restored.
+ */
+ if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_SHOW_RESET) {
+ dev_err(&client->dev, "Unexpected device reset\n");
+
+ error = regmap_raw_write(iqs626->regmap, IQS626_SYS_SETTINGS,
+ sys_reg, sizeof(*sys_reg));
+ if (error)
+ dev_err(&client->dev,
+ "Failed to re-initialize device: %d\n", error);
+
+ return error;
+ }
+
+ if (be16_to_cpu(flags.system) & IQS626_SYS_FLAGS_IN_ATI)
+ return 0;
+
+ /*
+ * Unlike the ULP or generic channels, the Hall channel does not have a
+ * direction flag. Instead, the direction (i.e. magnet polarity) can be
+ * derived based on the sign of the 2's complement differential output.
+ */
+ if (sys_reg->active & iqs626_channels[IQS626_CH_HALL].active) {
+ error = regmap_raw_read(iqs626->regmap, IQS626_HALL_OUTPUT,
+ &hall_output, sizeof(hall_output));
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read Hall output: %d\n", error);
+ return error;
+ }
+
+ *dir_mask &= ~iqs626_channels[IQS626_CH_HALL].active;
+ if (le16_to_cpu(hall_output) < 0x8000)
+ *dir_mask |= iqs626_channels[IQS626_CH_HALL].active;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(iqs626_channels); i++) {
+ if (!(sys_reg->active & iqs626_channels[i].active))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(iqs626_events); j++) {
+ if (!iqs626->kp_type[i][j])
+ continue;
+
+ state = flags.states[iqs626_events[j].st_offs];
+ state &= iqs626_events[j].dir_up ? *dir_mask
+ : ~(*dir_mask);
+ state &= iqs626_channels[i].active;
+
+ input_event(iqs626->keypad, iqs626->kp_type[i][j],
+ iqs626->kp_code[i][j], !!state);
+ }
+ }
+
+ input_sync(iqs626->keypad);
+
+ /*
+ * The following completion signals that ATI has finished, any initial
+ * switch states have been reported and the keypad can be registered.
+ */
+ complete_all(&iqs626->ati_done);
+
+ if (!(sys_reg->active & iqs626_channels[IQS626_CH_TP_2].active))
+ return 0;
+
+ if (sys_reg->event_mask & IQS626_EVENT_MASK_GESTURE) {
+ state = flags.states[IQS626_ST_OFFS_TOUCH];
+ state &= iqs626_channels[IQS626_CH_TP_2].active;
+
+ input_report_key(iqs626->trackpad, BTN_TOUCH, state);
+
+ if (state)
+ touchscreen_report_pos(iqs626->trackpad, &iqs626->prop,
+ flags.trackpad_x,
+ flags.trackpad_y, false);
+ } else {
+ for (i = 0; i < IQS626_NUM_GESTURES; i++)
+ input_report_key(iqs626->trackpad, iqs626->tp_code[i],
+ flags.gesture & BIT(i));
+
+ if (flags.gesture & GENMASK(IQS626_GESTURE_TAP, 0)) {
+ input_sync(iqs626->trackpad);
+
+ /*
+ * Momentary gestures are followed by a complementary
+ * release cycle so as to emulate a full keystroke.
+ */
+ for (i = 0; i < IQS626_GESTURE_HOLD; i++)
+ input_report_key(iqs626->trackpad,
+ iqs626->tp_code[i], 0);
+ }
+ }
+
+ input_sync(iqs626->trackpad);
+
+ return 0;
+}
+
+static irqreturn_t iqs626_irq(int irq, void *context)
+{
+ struct iqs626_private *iqs626 = context;
+
+ if (iqs626_report(iqs626))
+ return IRQ_NONE;
+
+ /*
+ * The device does not deassert its interrupt (RDY) pin until shortly
+ * after receiving an I2C stop condition; the following delay ensures
+ * the interrupt handler does not return before this time.
+ */
+ iqs626_irq_wait();
+
+ return IRQ_HANDLED;
+}
+
+static const struct regmap_config iqs626_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = IQS626_MAX_REG,
+};
+
+static int iqs626_probe(struct i2c_client *client)
+{
+ struct iqs626_ver_info ver_info;
+ struct iqs626_private *iqs626;
+ int error;
+
+ iqs626 = devm_kzalloc(&client->dev, sizeof(*iqs626), GFP_KERNEL);
+ if (!iqs626)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, iqs626);
+ iqs626->client = client;
+
+ iqs626->regmap = devm_regmap_init_i2c(client, &iqs626_regmap_config);
+ if (IS_ERR(iqs626->regmap)) {
+ error = PTR_ERR(iqs626->regmap);
+ dev_err(&client->dev, "Failed to initialize register map: %d\n",
+ error);
+ return error;
+ }
+
+ init_completion(&iqs626->ati_done);
+
+ error = regmap_raw_read(iqs626->regmap, IQS626_VER_INFO, &ver_info,
+ sizeof(ver_info));
+ if (error)
+ return error;
+
+ if (ver_info.prod_num != IQS626_VER_INFO_PROD_NUM) {
+ dev_err(&client->dev, "Unrecognized product number: 0x%02X\n",
+ ver_info.prod_num);
+ return -EINVAL;
+ }
+
+ error = iqs626_parse_prop(iqs626);
+ if (error)
+ return error;
+
+ error = iqs626_input_init(iqs626);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, iqs626_irq, IRQF_ONESHOT,
+ client->name, iqs626);
+ if (error) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ if (!wait_for_completion_timeout(&iqs626->ati_done,
+ msecs_to_jiffies(2000))) {
+ dev_err(&client->dev, "Failed to complete ATI\n");
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * The keypad may include one or more switches and is not registered
+ * until ATI is complete and the initial switch states are read.
+ */
+ error = input_register_device(iqs626->keypad);
+ if (error)
+ dev_err(&client->dev, "Failed to register keypad: %d\n", error);
+
+ return error;
+}
+
+static int __maybe_unused iqs626_suspend(struct device *dev)
+{
+ struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+ struct i2c_client *client = iqs626->client;
+ unsigned int val;
+ int error;
+
+ if (!iqs626->suspend_mode)
+ return 0;
+
+ disable_irq(client->irq);
+
+ /*
+ * Automatic power mode switching must be disabled before the device is
+ * forced into any particular power mode. In this case, the device will
+ * transition into normal-power mode.
+ */
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_DIS_AUTO, ~0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * The following check ensures the device has completed its transition
+ * into normal-power mode before a manual mode switch is performed.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+ if (error)
+ goto err_irq;
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_PWR_MODE_MASK,
+ iqs626->suspend_mode <<
+ IQS626_SYS_SETTINGS_PWR_MODE_SHIFT);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This last check ensures the device has completed its transition into
+ * the desired power mode to prevent any spurious interrupts from being
+ * triggered after iqs626_suspend has already returned.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ (val & IQS626_SYS_FLAGS_PWR_MODE_MASK)
+ == (iqs626->suspend_mode <<
+ IQS626_SYS_FLAGS_PWR_MODE_SHIFT),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+
+err_irq:
+ iqs626_irq_wait();
+ enable_irq(client->irq);
+
+ return error;
+}
+
+static int __maybe_unused iqs626_resume(struct device *dev)
+{
+ struct iqs626_private *iqs626 = dev_get_drvdata(dev);
+ struct i2c_client *client = iqs626->client;
+ unsigned int val;
+ int error;
+
+ if (!iqs626->suspend_mode)
+ return 0;
+
+ disable_irq(client->irq);
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_PWR_MODE_MASK, 0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This check ensures the device has returned to normal-power mode
+ * before automatic power mode switching is re-enabled.
+ */
+ error = regmap_read_poll_timeout(iqs626->regmap, IQS626_SYS_FLAGS, val,
+ !(val & IQS626_SYS_FLAGS_PWR_MODE_MASK),
+ IQS626_PWR_MODE_POLL_SLEEP_US,
+ IQS626_PWR_MODE_POLL_TIMEOUT_US);
+ if (error)
+ goto err_irq;
+
+ error = regmap_update_bits(iqs626->regmap, IQS626_SYS_SETTINGS,
+ IQS626_SYS_SETTINGS_DIS_AUTO, 0);
+ if (error)
+ goto err_irq;
+
+ /*
+ * This step reports any events that may have been "swallowed" as a
+ * result of polling PWR_MODE (which automatically acknowledges any
+ * pending interrupts).
+ */
+ error = iqs626_report(iqs626);
+
+err_irq:
+ iqs626_irq_wait();
+ enable_irq(client->irq);
+
+ return error;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs626_pm, iqs626_suspend, iqs626_resume);
+
+static const struct of_device_id iqs626_of_match[] = {
+ { .compatible = "azoteq,iqs626a" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs626_of_match);
+
+static struct i2c_driver iqs626_i2c_driver = {
+ .driver = {
+ .name = "iqs626a",
+ .of_match_table = iqs626_of_match,
+ .pm = &iqs626_pm,
+ },
+ .probe_new = iqs626_probe,
+};
+module_i2c_driver(iqs626_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS626A Capacitive Touch Controller");
+MODULE_LICENSE("GPL");
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread