[PATCH v2 0/5] HID: mcp2221: iio support and device resource management

[PATCH v2 0/5] HID: mcp2221: iio support and device resource management

[Matt Ranostay]

From: Matt Ranostay <matt@ranostay.org>

This patchset is primarily to enable iio support for the MCP2221 HID driver,
but requires several Kconfig changes and device resource management.

First attempt of this patchset is referenced here:

Link: https://lore.kernel.org/all/20220729154723.99947-1-matt.ranostay@konsulko.com/

Changes from v1:
* Fixing various Kconfig recursive dependencies that appear with 'imply IIO'
* Switch hid-mcp2221 driver to device managed resources for i2c support
* Reworking patchset per advice on lore.kernel.org link above

Matt Ranostay (5):
  i2c: muxes: ltc4306: fix future recursive dependencies
  iio: addac: stx104: fix future recursive dependencies
  iio: dac: fix future recursive dependencies
  HID: mcp2221: switch i2c registration to devm functions
  HID: mcp2221: add ADC/DAC support via iio subsystem

 drivers/hid/Kconfig       |   1 +
 drivers/hid/hid-mcp2221.c | 196 ++++++++++++++++++++++++++++++++++++--
 drivers/i2c/muxes/Kconfig |   2 +-
 drivers/iio/addac/Kconfig |   3 +-
 drivers/iio/dac/Kconfig   |   6 +-
 5 files changed, 195 insertions(+), 13 deletions(-)

-- 
2.37.2

[PATCH v2 1/5] i2c: muxes: ltc4306: fix future recursive dependencies

[Matt Ranostay]

When using 'imply IIO' for other configurations which have 'select GPIOLIB'
the following recursive dependency detected happens for I2C_MUX_LTC4306

Switch from 'select GPIOLIB' to 'depends on GPIOLIB' to avoid this per
recommendation in kconfig-language.rst

drivers/gpio/Kconfig:14:error: recursive dependency detected!
drivers/gpio/Kconfig:14:        symbol GPIOLIB is selected by I2C_MUX_LTC4306
drivers/i2c/muxes/Kconfig:47:   symbol I2C_MUX_LTC4306 depends on I2C_MUX
drivers/i2c/Kconfig:62: symbol I2C_MUX is selected by MPU3050_I2C
drivers/iio/gyro/Kconfig:127:   symbol MPU3050_I2C depends on IIO
drivers/iio/Kconfig:6:  symbol IIO is implied by HID_MCP2221
drivers/hid/Kconfig:1227:       symbol HID_MCP2221 depends on GPIOLIB

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/i2c/muxes/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index ea838dbae32e..7b6a68df4a39 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -46,7 +46,7 @@ config I2C_MUX_GPMUX
 
 config I2C_MUX_LTC4306
 	tristate "LTC LTC4306/5 I2C multiplexer"
-	select GPIOLIB
+	depends on GPIOLIB
 	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Analog Devices
-- 
2.37.2

[PATCH v2 2/5] iio: addac: stx104: fix future recursive dependencies

[Matt Ranostay]

When using 'imply IIO' for other configurations which have 'select GPIOLIB'
the following recursive dependency detected happens for STX1040

Switch from 'select GPIOLIB' to 'depends on GPIOLIB' to avoid this per
recommendation in kconfig-language.rst

drivers/gpio/Kconfig:14:error: recursive dependency detected!
drivers/gpio/Kconfig:14:        symbol GPIOLIB is selected by STX104
drivers/iio/addac/Kconfig:20:   symbol STX104 depends on IIO
drivers/iio/Kconfig:6:  symbol IIO is implied by HID_MCP2221
drivers/hid/Kconfig:1227:       symbol HID_MCP2221 depends on GPIOLIB

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/iio/addac/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index fcf6d2269bfc..494790816ac7 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -19,9 +19,8 @@ config AD74413R
 
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
-	depends on PC104 && X86
+	depends on PC104 && X86 && GPIOLIB
 	select ISA_BUS_API
-	select GPIOLIB
 	help
 	  Say yes here to build support for the Apex Embedded Systems STX104
 	  integrated analog PC/104 card.
-- 
2.37.2

[PATCH v2 3/5] iio: dac: fix future recursive dependencies

[Matt Ranostay]

When using 'imply IIO' for other configurations which have 'select GPIOLIB'
the following recursive dependency detected happens for AD5592R and AD5593R.

Switch from 'select GPIOLIB' to 'depends on GPIOLIB' to avoid this per
recommendation in kconfig-language.rst

drivers/gpio/Kconfig:14:error: recursive dependency detected!
drivers/gpio/Kconfig:14:        symbol GPIOLIB is selected by AD5592R
drivers/iio/dac/Kconfig:93:     symbol AD5592R depends on IIO
drivers/iio/Kconfig:6:  symbol IIO is implied by HID_MCP2221
drivers/hid/Kconfig:1227:       symbol HID_MCP2221 depends on GPIOLIB

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/iio/dac/Kconfig | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 80521bd28d0f..b93003e80b70 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -92,8 +92,7 @@ config AD5592R_BASE
 
 config AD5592R
 	tristate "Analog Devices AD5592R ADC/DAC driver"
-	depends on SPI_MASTER
-	select GPIOLIB
+	depends on SPI_MASTER && GPIOLIB
 	select AD5592R_BASE
 	help
 	  Say yes here to build support for Analog Devices AD5592R
@@ -104,8 +103,7 @@ config AD5592R
 
 config AD5593R
 	tristate "Analog Devices AD5593R ADC/DAC driver"
-	depends on I2C
-	select GPIOLIB
+	depends on I2C && GPIOLIB
 	select AD5592R_BASE
 	help
 	  Say yes here to build support for Analog Devices AD5593R
-- 
2.37.2

[PATCH v2 4/5] HID: mcp2221: switch i2c registration to devm functions

[Matt Ranostay]

Switch from i2c_add_adapter() to resource managed devm_i2c_add_adapter()
for matching rest of driver initialization, and more concise code.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/hid/hid-mcp2221.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
index de52e9f7bb8c..29e69576c3d4 100644
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -873,7 +873,7 @@ static int mcp2221_probe(struct hid_device *hdev,
 			"MCP2221 usb-i2c bridge on hidraw%d",
 			((struct hidraw *)hdev->hidraw)->minor);
 
-	ret = i2c_add_adapter(&mcp->adapter);
+	ret = devm_i2c_add_adapter(&hdev->dev, &mcp->adapter);
 	if (ret) {
 		hid_err(hdev, "can't add usb-i2c adapter: %d\n", ret);
 		goto err_i2c;
@@ -884,7 +884,7 @@ static int mcp2221_probe(struct hid_device *hdev,
 	mcp->gc = devm_kzalloc(&hdev->dev, sizeof(*mcp->gc), GFP_KERNEL);
 	if (!mcp->gc) {
 		ret = -ENOMEM;
-		goto err_gc;
+		goto err_i2c;
 	}
 
 	mcp->gc->label = "mcp2221_gpio";
@@ -900,12 +900,10 @@ static int mcp2221_probe(struct hid_device *hdev,
 
 	ret = devm_gpiochip_add_data(&hdev->dev, mcp->gc, mcp);
 	if (ret)
-		goto err_gc;
+		goto err_i2c;
 
 	return 0;
 
-err_gc:
-	i2c_del_adapter(&mcp->adapter);
 err_i2c:
 	hid_hw_close(mcp->hdev);
 err_hstop:
@@ -917,7 +915,6 @@ static void mcp2221_remove(struct hid_device *hdev)
 {
 	struct mcp2221 *mcp = hid_get_drvdata(hdev);
 
-	i2c_del_adapter(&mcp->adapter);
 	hid_hw_close(mcp->hdev);
 	hid_hw_stop(mcp->hdev);
 }
-- 
2.37.2

[PATCH v2 5/5] HID: mcp2221: add ADC/DAC support via iio subsystem

[Matt Ranostay]

Add support for 3x 10-bit ADC and 1x DAC channels registered via the iio
subsystem.

To prevent breakage and unexpected dependencies this support only is
only built if CONFIG_IIO is enabled, and is only weakly referenced by
'imply IIO' within the respective Kconfig.

Additionally the iio device only gets registered if at least one channel
is enabled in the power-on configuration read from SRAM.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
---
 drivers/hid/Kconfig       |   1 +
 drivers/hid/hid-mcp2221.c | 187 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 188 insertions(+)

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 863d1f96ea57..cdae312f4795 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1228,6 +1228,7 @@ config HID_MCP2221
 	tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
 	depends on USB_HID && I2C
 	depends on GPIOLIB
+	imply IIO
 	help
 	Provides I2C and SMBUS host adapter functionality over USB-HID
 	through MCP2221 device.
diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
index 29e69576c3d4..923b41eb76b3 100644
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -16,6 +16,7 @@
 #include <linux/hidraw.h>
 #include <linux/i2c.h>
 #include <linux/gpio/driver.h>
+#include <linux/iio/iio.h>
 #include "hid-ids.h"
 
 /* Commands codes in a raw output report */
@@ -30,6 +31,8 @@ enum {
 	MCP2221_I2C_CANCEL = 0x10,
 	MCP2221_GPIO_SET = 0x50,
 	MCP2221_GPIO_GET = 0x51,
+	MCP2221_SET_SRAM_SETTINGS = 0x60,
+	MCP2221_GET_SRAM_SETTINGS = 0x61,
 };
 
 /* Response codes in a raw input report */
@@ -89,6 +92,7 @@ struct mcp2221 {
 	struct i2c_adapter adapter;
 	struct mutex lock;
 	struct completion wait_in_report;
+	struct delayed_work init_work;
 	u8 *rxbuf;
 	u8 txbuf[64];
 	int rxbuf_idx;
@@ -97,6 +101,16 @@ struct mcp2221 {
 	struct gpio_chip *gc;
 	u8 gp_idx;
 	u8 gpio_dir;
+	u8 mode[4];
+#if IS_REACHABLE(CONFIG_IIO)
+	struct iio_chan_spec iio_channels[3];
+	u16 adc_values[3];
+	u8 dac_value;
+#endif
+};
+
+struct mcp2221_iio {
+	struct mcp2221 *mcp;
 };
 
 /*
@@ -745,6 +759,9 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 				break;
 			}
 			mcp->status = mcp_get_i2c_eng_state(mcp, data, 8);
+#if IS_REACHABLE(CONFIG_IIO)
+			memcpy(&mcp->adc_values, &data[50], sizeof(mcp->adc_values));
+#endif
 			break;
 		default:
 			mcp->status = -EIO;
@@ -816,6 +833,32 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 		complete(&mcp->wait_in_report);
 		break;
 
+	case MCP2221_SET_SRAM_SETTINGS:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			mcp->status = 0;
+			break;
+		default:
+			mcp->status = -EAGAIN;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
+	case MCP2221_GET_SRAM_SETTINGS:
+		switch (data[1]) {
+		case MCP2221_SUCCESS:
+			memcpy(&mcp->mode, &data[22], 4);
+#if IS_REACHABLE(CONFIG_IIO)
+			mcp->dac_value = data[6] & GENMASK(4, 0);
+#endif
+			mcp->status = 0;
+			break;
+		default:
+			mcp->status = -EAGAIN;
+		}
+		complete(&mcp->wait_in_report);
+		break;
+
 	default:
 		mcp->status = -EIO;
 		complete(&mcp->wait_in_report);
@@ -824,6 +867,145 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 	return 1;
 }
 
+#if IS_REACHABLE(CONFIG_IIO)
+static int mcp2221_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct mcp2221_iio *priv = iio_priv(indio_dev);
+	struct mcp2221 *mcp = priv->mcp;
+	int ret;
+
+	mutex_lock(&mcp->lock);
+
+	if (channel->output) {
+		*val = mcp->dac_value;
+		ret = IIO_VAL_INT;
+	} else {
+		/* Read ADC values */
+		ret = mcp_chk_last_cmd_status(mcp);
+
+		if (!ret) {
+			*val = le16_to_cpu(mcp->adc_values[channel->address]);
+			if (*val >= BIT(10))
+				ret =  -EINVAL;
+			else
+				ret = IIO_VAL_INT;
+		}
+	}
+
+	mutex_unlock(&mcp->lock);
+
+	return ret;
+}
+
+static int mcp2221_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct mcp2221_iio *priv = iio_priv(indio_dev);
+	struct mcp2221 *mcp = priv->mcp;
+	int ret;
+
+	if (val < 0 || val >= BIT(5))
+		return -EINVAL;
+
+	mutex_lock(&mcp->lock);
+
+	memset(mcp->txbuf, 0, 12);
+	mcp->txbuf[0] = MCP2221_SET_SRAM_SETTINGS;
+	mcp->txbuf[4] = BIT(7) | val;
+
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 12);
+
+	if (!ret)
+		mcp->dac_value = val;
+
+	mutex_unlock(&mcp->lock);
+
+	return ret;
+}
+
+static const struct iio_info mcp2221_info = {
+	.read_raw = &mcp2221_read_raw,
+	.write_raw = &mcp2221_write_raw,
+};
+
+static int mcp_iio_channels(struct mcp2221 *mcp)
+{
+	int idx, cnt = 0;
+	bool dac_created = false;
+
+	/* GP0 doesn't have ADC/DAC alternative function */
+	for (idx = 1; idx < MCP_NGPIO; idx++) {
+		struct iio_chan_spec *chan = &mcp->iio_channels[cnt];
+
+		switch (mcp->mode[idx]) {
+		case 2:
+			chan->address = idx - 1;
+			chan->channel = cnt++;
+			break;
+		case 3:
+			/* GP1 doesn't have DAC alternative function */
+			if (idx == 1 || dac_created)
+				continue;
+			/* DAC1 and DAC2 outputs are connected to the same DAC */
+			dac_created = true;
+			chan->output = 1;
+			cnt++;
+			break;
+		default:
+			continue;
+		};
+
+		chan->type = IIO_VOLTAGE;
+		chan->indexed = 1;
+		chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+		chan->scan_index = -1;
+	}
+
+	return cnt;
+}
+
+static void mcp_init_work(struct work_struct *work)
+{
+	struct iio_dev *indio_dev;
+	struct mcp2221 *mcp = container_of(work, struct mcp2221, init_work.work);
+	struct mcp2221_iio *data;
+	int ret, num_channels;
+
+	hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+	mutex_lock(&mcp->lock);
+
+	mcp->txbuf[0] = MCP2221_GET_SRAM_SETTINGS;
+	ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+	mutex_unlock(&mcp->lock);
+	hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+
+	if (ret)
+		return;
+
+	num_channels = mcp_iio_channels(mcp);
+	if (!num_channels)
+		return;
+
+	indio_dev = devm_iio_device_alloc(&mcp->hdev->dev, sizeof(*data));
+	if (!indio_dev)
+		return;
+
+	data = iio_priv(indio_dev);
+	data->mcp = mcp;
+
+	indio_dev->name = "mcp2221";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mcp2221_info;
+	indio_dev->channels = mcp->iio_channels;
+	indio_dev->num_channels = num_channels;
+
+	devm_iio_device_register(&mcp->hdev->dev, indio_dev);
+}
+#endif
+
 static int mcp2221_probe(struct hid_device *hdev,
 					const struct hid_device_id *id)
 {
@@ -902,6 +1084,11 @@ static int mcp2221_probe(struct hid_device *hdev,
 	if (ret)
 		goto err_i2c;
 
+#if IS_REACHABLE(CONFIG_IIO)
+	INIT_DELAYED_WORK(&mcp->init_work, mcp_init_work);
+	schedule_delayed_work(&mcp->init_work, msecs_to_jiffies(500));
+#endif
+
 	return 0;
 
 err_i2c:
-- 
2.37.2

Re: [PATCH v2 0/5] HID: mcp2221: iio support and device resource management

[Jonathan Cameron]

On Sat, 10 Sep 2022 18:40:43 -0700
Matt Ranostay <matt.ranostay@konsulko.com> wrote:

> From: Matt Ranostay <matt@ranostay.org>
> 
> This patchset is primarily to enable iio support for the MCP2221 HID driver,
> but requires several Kconfig changes and device resource management.
> 
> First attempt of this patchset is referenced here:
> 
> Link: https://lore.kernel.org/all/20220729154723.99947-1-matt.ranostay@konsulko.com/

Hi Matt,

Please resend v2 including cc for linux-iio.
Otherwise, unlikely to get relevant review.

Thanks,

Jonathan



> 
> Changes from v1:
> * Fixing various Kconfig recursive dependencies that appear with 'imply IIO'
> * Switch hid-mcp2221 driver to device managed resources for i2c support
> * Reworking patchset per advice on lore.kernel.org link above
> 
> Matt Ranostay (5):
>   i2c: muxes: ltc4306: fix future recursive dependencies
>   iio: addac: stx104: fix future recursive dependencies
>   iio: dac: fix future recursive dependencies
>   HID: mcp2221: switch i2c registration to devm functions
>   HID: mcp2221: add ADC/DAC support via iio subsystem
> 
>  drivers/hid/Kconfig       |   1 +
>  drivers/hid/hid-mcp2221.c | 196 ++++++++++++++++++++++++++++++++++++--
>  drivers/i2c/muxes/Kconfig |   2 +-
>  drivers/iio/addac/Kconfig |   3 +-
>  drivers/iio/dac/Kconfig   |   6 +-
>  5 files changed, 195 insertions(+), 13 deletions(-)
> 

Re: [PATCH v2 1/5] i2c: muxes: ltc4306: fix future recursive dependencies

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1557 bytes --]

On Sat, Sep 10, 2022 at 06:40:44PM -0700, Matt Ranostay wrote:
> When using 'imply IIO' for other configurations which have 'select GPIOLIB'
> the following recursive dependency detected happens for I2C_MUX_LTC4306
> 
> Switch from 'select GPIOLIB' to 'depends on GPIOLIB' to avoid this per
> recommendation in kconfig-language.rst
> 
> drivers/gpio/Kconfig:14:error: recursive dependency detected!
> drivers/gpio/Kconfig:14:        symbol GPIOLIB is selected by I2C_MUX_LTC4306
> drivers/i2c/muxes/Kconfig:47:   symbol I2C_MUX_LTC4306 depends on I2C_MUX
> drivers/i2c/Kconfig:62: symbol I2C_MUX is selected by MPU3050_I2C
> drivers/iio/gyro/Kconfig:127:   symbol MPU3050_I2C depends on IIO
> drivers/iio/Kconfig:6:  symbol IIO is implied by HID_MCP2221
> drivers/hid/Kconfig:1227:       symbol HID_MCP2221 depends on GPIOLIB
> 
> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>

The I2C mux maintainer is not on CC. get_maintainer.pl would have
mentioned him.

> ---
>  drivers/i2c/muxes/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
> index ea838dbae32e..7b6a68df4a39 100644
> --- a/drivers/i2c/muxes/Kconfig
> +++ b/drivers/i2c/muxes/Kconfig
> @@ -46,7 +46,7 @@ config I2C_MUX_GPMUX
>  
>  config I2C_MUX_LTC4306
>  	tristate "LTC LTC4306/5 I2C multiplexer"
> -	select GPIOLIB
> +	depends on GPIOLIB
>  	select REGMAP_I2C
>  	help
>  	  If you say yes here you get support for the Analog Devices
> -- 
> 2.37.2
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]