iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@kernel.org>, Borislav Petkov <bp@suse.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Ricardo Neri <ricardo.neri@intel.com>,
	Stephane Eranian <eranian@google.com>,
	Wincy Van <fanwenyi0529@gmail.com>,
	Ashok Raj <ashok.raj@intel.com>,
	x86@kernel.org, Andi Kleen <andi.kleen@intel.com>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	"Ravi V. Shankar" <ravi.v.shankar@intel.com>,
	Ricardo Neri <ricardo.neri-calderon@linux.intel.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Juergen Gross <jgross@suse.com>, Tony Luck <tony.luck@intel.com>,
	Randy Dunlap <rdunlap@infradead.org>,
	linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
	Jacob Pan <jacob.jun.pan@intel.com>,
	Philippe Ombredanne <pombredanne@nexb.com>
Subject: [RFC PATCH v4 20/21] iommu/vt-d: hpet: Reserve an interrupt remampping table entry for watchdog
Date: Thu, 23 May 2019 18:16:22 -0700	[thread overview]
Message-ID: <1558660583-28561-21-git-send-email-ricardo.neri-calderon@linux.intel.com> (raw)
In-Reply-To: <1558660583-28561-1-git-send-email-ricardo.neri-calderon@linux.intel.com>

When interrupt remapping is enabled, MSI interrupt messages must follow a
special format that the IOMMU can understand. Hence, when the HPET hard
lockup detector is used with interrupt remapping, it must also follow this
special format.

The IOMMU, given the information about a particular interrupt, already
knows how to populate the MSI message with this special format and the
corresponding entry in the interrupt remapping table. Given that this is a
special interrupt case, we want to avoid the interrupt subsystem. Add two
functions to create an entry for the HPET hard lockup detector. Perform
this process in two steps as described below.

When initializing the lockup detector, the function
hld_hpet_intremap_alloc_irq() permanently allocates a new entry in the
interrupt remapping table and populates it with the information the
IOMMU driver needs. In order to populate the table, the IOMMU needs to
know the HPET block ID as described in the ACPI table. Hence, add such
ID to the data of the hardlockup detector.

When the hardlockup detector is enabled, the function
hld_hpet_intremapactivate_irq() activates the recently created entry
in the interrupt remapping table via the modify_irte() functions. While
doing this, it specifies which CPU the interrupt must target via its APIC
ID. This function can be called every time the destination iD of the
interrupt needs to be updated; there is no need to allocate or remove
entries in the interrupt remapping table.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Wincy Van <fanwenyi0529@gmail.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: x86@kernel.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
---
 arch/x86/include/asm/hpet.h         | 11 +++++++
 arch/x86/kernel/hpet.c              |  1 +
 drivers/iommu/intel_irq_remapping.c | 49 +++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)

diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index a82cbe17479d..811051fa7ade 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -119,6 +119,8 @@ struct hpet_hld_data {
 	u64		tsc_ticks_per_cpu;
 	u32		handling_cpu;
 	u32		enabled_cpus;
+	u8		blockid;
+	void		*intremap_data;
 	struct msi_msg	msi_msg;
 	unsigned long	cpu_monitored_mask[0];
 };
@@ -129,6 +131,15 @@ extern void hardlockup_detector_hpet_stop(void);
 extern void hardlockup_detector_hpet_enable(unsigned int cpu);
 extern void hardlockup_detector_hpet_disable(unsigned int cpu);
 extern void hardlockup_detector_switch_to_perf(void);
+#ifdef CONFIG_IRQ_REMAP
+extern int hld_hpet_intremap_activate_irq(struct hpet_hld_data *hdata);
+extern int hld_hpet_intremap_alloc_irq(struct hpet_hld_data *hdata);
+#else
+static inline int hld_hpet_intremap_activate_irq(struct hpet_hld_data *hdata)
+{ return -ENODEV; }
+static inline int hld_hpet_intremap_alloc_irq(struct hpet_hld_data *hdata)
+{ return -ENODEV; }
+#endif /* CONFIG_IRQ_REMAP */
 #else
 static inline struct hpet_hld_data *hpet_hardlockup_detector_assign_timer(void)
 { return NULL; }
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index dd3bb664a188..ddc9be81a075 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -202,6 +202,7 @@ struct hpet_hld_data *hpet_hardlockup_detector_assign_timer(void)
 	 */
 	temp = (u64)cfg << HPET_COUNTER_CLK_PERIOD_SHIFT;
 	hdata->ticks_per_second = hpet_get_ticks_per_sec(temp);
+	hdata->blockid = hpet_blockid;
 
 	return hdata;
 }
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 2e61eaca7d7e..256466dd30cb 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -20,6 +20,7 @@
 #include <asm/irq_remapping.h>
 #include <asm/pci-direct.h>
 #include <asm/msidef.h>
+#include <asm/hpet.h>
 
 #include "irq_remapping.h"
 
@@ -1516,3 +1517,51 @@ int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)
 
 	return ret;
 }
+
+#ifdef CONFIG_X86_HARDLOCKUP_DETECTOR_HPET
+int hld_hpet_intremap_activate_irq(struct hpet_hld_data *hdata)
+{
+	u32 destid = apic->calc_dest_apicid(hdata->handling_cpu);
+	struct intel_ir_data *data;
+
+	data = (struct intel_ir_data *)hdata->intremap_data;
+	data->irte_entry.dest_id = IRTE_DEST(destid);
+	return modify_irte(&data->irq_2_iommu, &data->irte_entry);
+}
+
+int hld_hpet_intremap_alloc_irq(struct hpet_hld_data *hdata)
+{
+	struct intel_ir_data *data;
+	struct irq_alloc_info info;
+	struct intel_iommu *iommu;
+	struct irq_cfg irq_cfg;
+	int index;
+
+	iommu = map_hpet_to_ir(hdata->blockid);
+	if (!iommu)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	down_read(&dmar_global_lock);
+	index =  alloc_irte(iommu, 0, &data->irq_2_iommu, 1);
+	up_read(&dmar_global_lock);
+	if (index < 0)
+		return index;
+
+	info.type = X86_IRQ_ALLOC_TYPE_HPET;
+	info.hpet_id = hdata->blockid;
+
+	/* Vector is not relevant if NMI is the delivery mode */
+	irq_cfg.vector = 0;
+	irq_cfg.delivery_mode = dest_NMI;
+	intel_irq_remapping_prepare_irte(data, &irq_cfg, &info, index, 0);
+
+	hdata->intremap_data = data;
+	memcpy(&hdata->msi_msg, &data->msi_entry, sizeof(hdata->msi_msg));
+
+	return 0;
+}
+#endif /* CONFIG_HARDLOCKUP_DETECTOR_HPET */
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2019-05-24  1:18 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-24  1:16 [RFC PATCH v4 00/21] Implement an HPET-based hardlockup detector Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 01/21] x86/msi: Add definition for NMI delivery mode Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 02/21] x86/hpet: Expose hpet_writel() in header Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 03/21] x86/hpet: Calculate ticks-per-second in a separate function Ricardo Neri
2019-06-14 15:54   ` Thomas Gleixner
2019-06-14 15:59     ` Thomas Gleixner
2019-06-18 22:48     ` Ricardo Neri
2019-06-18 23:13       ` Thomas Gleixner
2019-05-24  1:16 ` [RFC PATCH v4 04/21] x86/hpet: Add hpet_set_comparator() for periodic and one-shot modes Ricardo Neri
2019-06-14 18:17   ` Thomas Gleixner
2019-06-18 22:48     ` Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 05/21] x86/hpet: Reserve timer for the HPET hardlockup detector Ricardo Neri
2019-06-11 19:54   ` Thomas Gleixner
2019-06-14  1:14     ` Ricardo Neri
2019-06-14 16:10       ` Thomas Gleixner
2019-06-18 22:48         ` Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 06/21] x86/hpet: Configure the timer used by the " Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 07/21] watchdog/hardlockup: Define a generic function to detect hardlockups Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 08/21] watchdog/hardlockup: Decouple the hardlockup detector from perf Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 09/21] x86/nmi: Add a NMI_WATCHDOG NMI handler category Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 10/21] watchdog/hardlockup: Add function to enable NMI watchdog on all allowed CPUs at once Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 11/21] x86/watchdog/hardlockup: Add an HPET-based hardlockup detector Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 12/21] watchdog/hardlockup/hpet: Adjust timer expiration on the number of monitored CPUs Ricardo Neri
2019-06-11 20:11   ` Thomas Gleixner
2019-06-18 22:46     ` Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 13/21] x86/watchdog/hardlockup/hpet: Determine if HPET timer caused NMI Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 14/21] watchdog/hardlockup: Use parse_option_str() to handle "nmi_watchdog" Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 15/21] watchdog/hardlockup/hpet: Only enable the HPET watchdog via a boot parameter Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 16/21] x86/watchdog: Add a shim hardlockup detector Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 17/21] x86/tsc: Switch to perf-based hardlockup detector if TSC become unstable Ricardo Neri
2019-06-07  0:35   ` Stephane Eranian via iommu
2019-06-07 14:14     ` Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 18/21] x86/apic: Add a parameter for the APIC delivery mode Ricardo Neri
2019-06-16  9:55   ` Thomas Gleixner
2019-06-18 22:47     ` Ricardo Neri
2019-06-18 23:15       ` Thomas Gleixner
2019-05-24  1:16 ` [RFC PATCH v4 19/21] iommu/vt-d: Rework prepare_irte() to support per-irq " Ricardo Neri
2019-05-24  1:16 ` Ricardo Neri [this message]
2019-06-16 18:42   ` [RFC PATCH v4 20/21] iommu/vt-d: hpet: Reserve an interrupt remampping table entry for watchdog Thomas Gleixner
2019-06-16 19:21   ` Thomas Gleixner
2019-06-17  8:25     ` Thomas Gleixner
2019-06-17 21:38       ` Stephane Eranian via iommu
2019-06-17 23:08         ` Thomas Gleixner
2019-06-19 15:43           ` Jacob Pan
2019-06-21 15:33             ` Thomas Gleixner
2019-06-21 17:31               ` Jacob Pan
2019-06-21 18:39                 ` Jacob Pan
2019-06-21 20:05                   ` Thomas Gleixner
2019-06-21 23:55                     ` Ricardo Neri
2019-06-22  7:21                       ` Thomas Gleixner
2019-10-18  2:48           ` Ricardo Neri
2019-06-18 22:45       ` Ricardo Neri
2019-05-24  1:16 ` [RFC PATCH v4 21/21] x86/watchdog/hardlockup/hpet: Support interrupt remapping Ricardo Neri
2019-06-16  8:44   ` Thomas Gleixner
2019-06-16  8:53     ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1558660583-28561-21-git-send-email-ricardo.neri-calderon@linux.intel.com \
    --to=ricardo.neri-calderon@linux.intel.com \
    --cc=andi.kleen@intel.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bp@suse.de \
    --cc=ebiederm@xmission.com \
    --cc=eranian@google.com \
    --cc=fanwenyi0529@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@intel.com \
    --cc=jan.kiszka@siemens.com \
    --cc=jgross@suse.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=pombredanne@nexb.com \
    --cc=ravi.v.shankar@intel.com \
    --cc=rdunlap@infradead.org \
    --cc=ricardo.neri@intel.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).