From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Auger Eric <eric.auger@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Alex Williamson <alex.williamson@redhat.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types
Date: Wed, 14 Aug 2019 13:17:26 -0700 [thread overview]
Message-ID: <20190814131726.06e7423c@jacob-builder> (raw)
In-Reply-To: <9d678164-219c-80f9-c1be-121c097c691a@redhat.com>
On Thu, 18 Jul 2019 10:35:37 +0200
Auger Eric <eric.auger@redhat.com> wrote:
> Hi Jacob,
>
> On 6/9/19 3:44 PM, Jacob Pan wrote:
> > When Shared Virtual Memory is exposed to a guest via vIOMMU,
> > scalable IOTLB invalidation may be passed down from outside IOMMU
> > subsystems. This patch adds invalidation functions that can be used
> > for additional translation cache types.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> > drivers/iommu/dmar.c | 50
> > +++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/intel-iommu.h | 21 +++++++++++++++---- 2 files
> > changed, 67 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> > index 6d969a1..0cda6fb 100644
> > --- a/drivers/iommu/dmar.c
> > +++ b/drivers/iommu/dmar.c
> > @@ -1357,6 +1357,21 @@ void qi_flush_iotlb(struct intel_iommu
> > *iommu, u16 did, u64 addr, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based IOTLB Invalidate */
> > +void qi_flush_piotlb(struct intel_iommu *iommu, u16 did, u64 addr,
> > u32 pasid,
> > + unsigned int size_order, u64 granu, int ih)
> > +{
> > + struct qi_desc desc;
> nit: you could also init to {};
> > +
> > + desc.qw0 = QI_EIOTLB_PASID(pasid) | QI_EIOTLB_DID(did) |
> > + QI_EIOTLB_GRAN(granu) | QI_EIOTLB_TYPE;
> > + desc.qw1 = QI_EIOTLB_ADDR(addr) | QI_EIOTLB_IH(ih) |
> > + QI_EIOTLB_AM(size_order);
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid, u16 qdep, u64 addr, unsigned mask)
> > {
> > @@ -1380,6 +1395,41 @@ void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, qi_submit_sync(&desc, iommu);
> > }
> >
> > +/* PASID-based device IOTLB Invalidate */
> > +void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16 sid, u16
> > pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned size, u64
> > granu)
> s/size/size_order
> > +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) |
> > QI_DEV_EIOTLB_SID(sid) |
> > + QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE |
> > + QI_DEV_IOTLB_PFSID(pfsid);
> maybe add a comment to remind MIP hint is sent to 0 as of now.
> > + desc.qw1 = QI_DEV_EIOTLB_GLOB(granu);
> > +
> > + /* If S bit is 0, we only flush a single page. If S bit is
> > set,
> > + * The least significant zero bit indicates the size. VT-d
> > spec
> > + * 6.5.2.6
> > + */
> > + if (!size)
> > + desc.qw0 |= QI_DEV_EIOTLB_ADDR(addr) &
> > ~QI_DEV_EIOTLB_SIZE;
> this is qw1.
my mistake.
> > + else {
> > + unsigned long mask = 1UL << (VTD_PAGE_SHIFT +
> > size);
> don't you miss a "- 1 " here?
your are right
> > +
> > + desc.qw1 |= QI_DEV_EIOTLB_ADDR(addr & ~mask) |
> > QI_DEV_EIOTLB_SIZE;
> desc.qw1 |= addr & ~mask | QI_DEV_EIOTLB_SIZE;
> ie. I don't think QI_DEV_EIOTLB_ADDR is useful here?
>
>
> So won't the following lines do the job?
>
> unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size) -1;
> desc.qw1 |= addr & ~mask;
> if (size)
> desc.qw1 |= QI_DEV_EIOTLB_SIZE
that would work too, and simpler. thanks for the suggestion. will
change.
> > + }
> > + qi_submit_sync(&desc, iommu);
> > +}
> > +
> > +void qi_flush_pasid_cache(struct intel_iommu *iommu, u16 did, u64
> > granu, int pasid) +{
> > + struct qi_desc desc;
> > +
> > + desc.qw0 = QI_PC_TYPE | QI_PC_DID(did) | QI_PC_GRAN(granu)
> > | QI_PC_PASID(pasid);
> nit: reorder the fields according to the spec, easier to check if any
> is missing.
sounds good.
> > + desc.qw1 = 0;
> > + desc.qw2 = 0;
> > + desc.qw3 = 0;
> > + qi_submit_sync(&desc, iommu);
> > +}
> > /*
> > * Disable Queued Invalidation interface.
> > */
> > diff --git a/include/linux/intel-iommu.h
> > b/include/linux/intel-iommu.h index 94d3a9a..1cdb35b 100644
> > --- a/include/linux/intel-iommu.h
> > +++ b/include/linux/intel-iommu.h
> > @@ -339,7 +339,7 @@ enum {
> > #define QI_IOTLB_GRAN(gran) (((u64)gran) >>
> > (DMA_TLB_FLUSH_GRANU_OFFSET-4)) #define QI_IOTLB_ADDR(addr)
> > (((u64)addr) & VTD_PAGE_MASK) #define
> > QI_IOTLB_IH(ih) (((u64)ih) << 6) -#define
> > QI_IOTLB_AM(am) (((u8)am)) +#define
> > QI_IOTLB_AM(am) (((u8)am) & 0x3f)
> > #define QI_CC_FM(fm) (((u64)fm) << 48)
> > #define QI_CC_SID(sid) (((u64)sid) << 32)
> > @@ -357,17 +357,22 @@ enum {
> > #define QI_PC_DID(did) (((u64)did) << 16)
> > #define QI_PC_GRAN(gran) (((u64)gran) << 4)
> >
> > -#define QI_PC_ALL_PASIDS (QI_PC_TYPE | QI_PC_GRAN(0))
> > -#define QI_PC_PASID_SEL (QI_PC_TYPE | QI_PC_GRAN(1))
> > +/* PASID cache invalidation granu */
> > +#define QI_PC_ALL_PASIDS 0
> > +#define QI_PC_PASID_SEL 1
> >
> > #define QI_EIOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
> > #define QI_EIOTLB_GL(gl) (((u64)gl) << 7)
> > #define QI_EIOTLB_IH(ih) (((u64)ih) << 6)
> > -#define QI_EIOTLB_AM(am) (((u64)am))
> > +#define QI_EIOTLB_AM(am) (((u64)am) & 0x3f)
> > #define QI_EIOTLB_PASID(pasid) (((u64)pasid) << 32)
> > #define QI_EIOTLB_DID(did) (((u64)did) << 16)
> > #define QI_EIOTLB_GRAN(gran) (((u64)gran) << 4)
> >
> > +/* QI Dev-IOTLB inv granu */
> > +#define QI_DEV_IOTLB_GRAN_ALL 1
> > +#define QI_DEV_IOTLB_GRAN_PASID_SEL 0
> > +
> > #define QI_DEV_EIOTLB_ADDR(a) ((u64)(a) & VTD_PAGE_MASK)
> > #define QI_DEV_EIOTLB_SIZE (((u64)1) << 11)
> > #define QI_DEV_EIOTLB_GLOB(g) ((u64)g)
> > @@ -658,8 +663,16 @@ extern void qi_flush_context(struct
> > intel_iommu *iommu, u16 did, u16 sid, u8 fm, u64 type);
> > extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64
> > addr, unsigned int size_order, u64 type);
> > +extern void qi_flush_piotlb(struct intel_iommu *iommu, u16 did,
> > u64 addr,
> > + u32 pasid, unsigned int size_order, u64
> > type, int ih); extern void qi_flush_dev_iotlb(struct intel_iommu
> > *iommu, u16 sid, u16 pfsid, u16 qdep, u64 addr, unsigned mask);
> > +
> > +extern void qi_flush_dev_piotlb(struct intel_iommu *iommu, u16
> > sid, u16 pfsid,
> > + u32 pasid, u16 qdep, u64 addr, unsigned
> > size, u64 granu);
> s/size/size_order
> > +
> > +extern void qi_flush_pasid_cache(struct intel_iommu *iommu, u16
> > did, u64 granu, int pasid); +
> > extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu
> > *iommu);
> > extern int dmar_ir_support(void);
> >
>
> Thanks
>
> Eric
[Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-08-14 20:13 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-18 15:42 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jacob Pan
2019-06-18 15:44 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-18 14:10 ` Jonathan Cameron
2019-06-24 22:28 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-24 22:24 ` Jacob Pan
2019-07-16 16:44 ` Auger Eric
2019-08-05 21:02 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-18 16:50 ` Jonathan Cameron
2019-06-25 18:55 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-07-16 9:29 ` Auger Eric
2019-08-13 16:57 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-07-16 9:30 ` Auger Eric
2019-08-05 20:02 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-18 15:57 ` Jonathan Cameron
2019-06-24 21:36 ` Jacob Pan
2019-06-27 1:53 ` Lu Baolu
2019-06-27 15:40 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-07-16 9:33 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-18 16:03 ` Jonathan Cameron
2019-06-24 23:44 ` Jacob Pan
2019-07-16 9:52 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-18 16:42 ` Jonathan Cameron
2019-06-24 23:59 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-18 16:44 ` Jonathan Cameron
2019-06-24 22:41 ` Jacob Pan
2019-06-27 2:50 ` Lu Baolu
2019-06-27 20:22 ` Jacob Pan
2019-07-05 2:21 ` Lu Baolu
2019-08-14 17:20 ` Jacob Pan
2019-07-16 16:45 ` Auger Eric
2019-07-16 17:04 ` Raj, Ashok
2019-07-18 7:47 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-07-18 8:35 ` Auger Eric
2019-08-14 20:17 ` Jacob Pan [this message]
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814131726.06e7423c@jacob-builder \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).