iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	 Rob Herring <robh+dt@kernel.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>
Cc: youlin.pei@mediatek.com, devicetree@vger.kernel.org,
	Nicolas Boichat <drinkcat@chromium.org>,
	srv_heupstream@mediatek.com, chao.hao@mediatek.com,
	linux-kernel@vger.kernel.org, Evan Green <evgreen@chromium.org>,
	Tomasz Figa <tfiga@google.com>,
	iommu@lists.linux-foundation.org,
	linux-mediatek@lists.infradead.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	anan.sun@mediatek.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 01/27] dt-bindings: iommu: mediatek: Convert IOMMU to DT schema
Date: Wed, 9 Dec 2020 16:00:36 +0800	[thread overview]
Message-ID: <20201209080102.26626-2-yong.wu@mediatek.com> (raw)
In-Reply-To: <20201209080102.26626-1-yong.wu@mediatek.com>

Convert MediaTek IOMMU to DT schema.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/iommu/mediatek,iommu.txt         | 105 -----------
 .../bindings/iommu/mediatek,iommu.yaml        | 167 ++++++++++++++++++
 2 files changed, 167 insertions(+), 105 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
 create mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml

diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
deleted file mode 100644
index ac949f7fe3d4..000000000000
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-* Mediatek IOMMU Architecture Implementation
-
-  Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and
-this M4U have two generations of HW architecture. Generation one uses flat
-pagetable, and only supports 4K size page mapping. Generation two uses the
-ARM Short-Descriptor translation table format for address translation.
-
-  About the M4U Hardware Block Diagram, please check below:
-
-              EMI (External Memory Interface)
-               |
-              m4u (Multimedia Memory Management Unit)
-               |
-          +--------+
-          |        |
-      gals0-rx   gals1-rx    (Global Async Local Sync rx)
-          |        |
-          |        |
-      gals0-tx   gals1-tx    (Global Async Local Sync tx)
-          |        |          Some SoCs may have GALS.
-          +--------+
-               |
-           SMI Common(Smart Multimedia Interface Common)
-               |
-       +----------------+-------
-       |                |
-       |             gals-rx        There may be GALS in some larbs.
-       |                |
-       |                |
-       |             gals-tx
-       |                |
-   SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
-   (display)         (vdec)
-       |                |
-       |                |
- +-----+-----+     +----+----+
- |     |     |     |    |    |
- |     |     |...  |    |    |  ... There are different ports in each larb.
- |     |     |     |    |    |
-OVL0 RDMA0 WDMA0  MC   PP   VLD
-
-  As above, The Multimedia HW will go through SMI and M4U while it
-access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
-smi local arbiter and smi common. It will control whether the Multimedia
-HW should go though the m4u for translation or bypass it and talk
-directly with EMI. And also SMI help control the power domain and clocks for
-each local arbiter.
-  Normally we specify a local arbiter(larb) for each multimedia HW
-like display, video decode, and camera. And there are different ports
-in each larb. Take a example, There are many ports like MC, PP, VLD in the
-video decode local arbiter, all these ports are according to the video HW.
-  In some SoCs, there may be a GALS(Global Async Local Sync) module between
-smi-common and m4u, and additional GALS module between smi-larb and
-smi-common. GALS can been seen as a "asynchronous fifo" which could help
-synchronize for the modules in different clock frequency.
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
-	"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
-	"mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW.
-	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
-						     generation one m4u HW.
-	"mediatek,mt8167-m4u" for mt8167 which uses generation two m4u HW.
-	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
-	"mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
-- reg : m4u register base and size.
-- interrupts : the interrupt of m4u.
-- clocks : must contain one entry for each clock-names.
-- clock-names : Only 1 optional clock:
-  - "bclk": the block clock of m4u.
-  Here is the list which require this "bclk":
-  - mt2701, mt2712, mt7623 and mt8173.
-  Note that m4u use the EMI clock which always has been enabled before kernel
-  if there is no this "bclk".
-- mediatek,larbs : List of phandle to the local arbiters in the current Socs.
-	Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort
-	according to the local arbiter index, like larb0, larb1, larb2...
-- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
-	Specifies the mtk_m4u_id as defined in
-	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
-	dt-binding/memory/mt2712-larb-port.h for mt2712,
-	dt-binding/memory/mt6779-larb-port.h for mt6779,
-	dt-binding/memory/mt8167-larb-port.h for mt8167,
-	dt-binding/memory/mt8173-larb-port.h for mt8173, and
-	dt-binding/memory/mt8183-larb-port.h for mt8183.
-
-Example:
-	iommu: iommu@10205000 {
-		compatible = "mediatek,mt8173-m4u";
-		reg = <0 0x10205000 0 0x1000>;
-		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_M4U>;
-		clock-names = "bclk";
-		mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>;
-		#iommu-cells = <1>;
-	};
-
-Example for a client device:
-	display {
-		compatible = "mediatek,mt8173-disp";
-		iommus = <&iommu M4U_PORT_DISP_OVL0>,
-			 <&iommu M4U_PORT_DISP_RDMA0>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
new file mode 100644
index 000000000000..b9946809fc2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek IOMMU Architecture Implementation
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |+
+  Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and
+  this M4U have two generations of HW architecture. Generation one uses flat
+  pagetable, and only supports 4K size page mapping. Generation two uses the
+  ARM Short-Descriptor translation table format for address translation.
+
+  About the M4U Hardware Block Diagram, please check below:
+
+                EMI (External Memory Interface)
+                 |
+                m4u (Multimedia Memory Management Unit)
+                 |
+            +--------+
+            |        |
+        gals0-rx   gals1-rx    (Global Async Local Sync rx)
+            |        |
+            |        |
+        gals0-tx   gals1-tx    (Global Async Local Sync tx)
+            |        |          Some SoCs may have GALS.
+            +--------+
+                 |
+             SMI Common(Smart Multimedia Interface Common)
+                 |
+         +----------------+-------
+         |                |
+         |             gals-rx        There may be GALS in some larbs.
+         |                |
+         |                |
+         |             gals-tx
+         |                |
+     SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
+     (display)         (vdec)
+         |                |
+         |                |
+   +-----+-----+     +----+----+
+   |     |     |     |    |    |
+   |     |     |...  |    |    |  ... There are different ports in each larb.
+   |     |     |     |    |    |
+  OVL0 RDMA0 WDMA0  MC   PP   VLD
+
+  As above, The Multimedia HW will go through SMI and M4U while it
+  access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
+  smi local arbiter and smi common. It will control whether the Multimedia
+  HW should go though the m4u for translation or bypass it and talk
+  directly with EMI. And also SMI help control the power domain and clocks for
+  each local arbiter.
+
+  Normally we specify a local arbiter(larb) for each multimedia HW
+  like display, video decode, and camera. And there are different ports
+  in each larb. Take a example, There are many ports like MC, PP, VLD in the
+  video decode local arbiter, all these ports are according to the video HW.
+
+  In some SoCs, there may be a GALS(Global Async Local Sync) module between
+  smi-common and m4u, and additional GALS module between smi-larb and
+  smi-common. GALS can been seen as a "asynchronous fifo" which could help
+  synchronize for the modules in different clock frequency.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-m4u  # generation one
+          - mediatek,mt2712-m4u  # generation two
+          - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt8167-m4u  # generation two
+          - mediatek,mt8173-m4u  # generation two
+          - mediatek,mt8183-m4u  # generation two
+
+      - description: mt7623 generation one
+        items:
+          - const: mediatek,mt7623-m4u
+          - const: mediatek,mt2701-m4u
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bclk is the block clock.
+
+  clock-names:
+    items:
+      - const: bclk
+
+  mediatek,larbs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 16
+    description: |
+      List of phandle to the local arbiters in the current Socs.
+      Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
+      according to the local arbiter index, like larb0, larb1, larb2...
+
+  '#iommu-cells':
+    const: 1
+    description: |
+      This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
+      defined in
+      dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
+      dt-binding/memory/mt2712-larb-port.h for mt2712,
+      dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt8167-larb-port.h for mt8167,
+      dt-binding/memory/mt8173-larb-port.h for mt8173,
+      dt-binding/memory/mt8183-larb-port.h for mt8183.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mediatek,larbs
+  - '#iommu-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-m4u
+              - mediatek,mt2712-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu: iommu@10205000 {
+            compatible = "mediatek,mt8173-m4u";
+            reg = <0x10205000 0x1000>;
+            interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_M4U>;
+            clock-names = "bclk";
+            mediatek,larbs = <&larb0 &larb1 &larb2
+                              &larb3 &larb4 &larb5>;
+            #iommu-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    /* Example for a client device */
+    display {
+           compatible = "mediatek,mt8173-disp";
+           iommus = <&iommu M4U_PORT_DISP_OVL0>,
+                    <&iommu M4U_PORT_DISP_RDMA0>;
+     };
-- 
2.18.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-12-09  8:01 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-09  8:00 [PATCH v5 00/27] MT8192 IOMMU support Yong Wu
2020-12-09  8:00 ` Yong Wu [this message]
2020-12-09  8:00 ` [PATCH v5 02/27] dt-bindings: memory: mediatek: Add a common larb-port header file Yong Wu
2020-12-09  8:00 ` [PATCH v5 03/27] dt-bindings: memory: mediatek: Extend LARB_NR_MAX to 32 Yong Wu
2020-12-09  8:00 ` [PATCH v5 04/27] dt-bindings: memory: mediatek: Add domain definition Yong Wu
2020-12-23  8:15   ` Tomasz Figa
2020-12-24 11:26     ` Yong Wu
2021-01-13  5:22       ` Tomasz Figa
2020-12-09  8:00 ` [PATCH v5 05/27] dt-bindings: memory: mediatek: Rename header guard for SMI header file Yong Wu
2020-12-09 12:12   ` Krzysztof Kozlowski
2020-12-11  3:26   ` Rob Herring
2020-12-09  8:00 ` [PATCH v5 06/27] dt-bindings: mediatek: Add binding for mt8192 IOMMU Yong Wu
2020-12-09 12:13   ` Krzysztof Kozlowski
2020-12-23  8:18   ` Tomasz Figa
2020-12-24 11:35     ` Yong Wu
2021-01-13  5:30       ` Tomasz Figa
2021-01-13  6:45         ` Yong Wu
2021-01-20  4:15           ` Tomasz Figa
2021-01-20  7:07             ` Yong Wu
2021-01-25  4:18               ` Tomasz Figa
2021-01-25  7:33                 ` Yong Wu
2021-01-29 11:45                   ` Tomasz Figa
2021-02-01  5:36                     ` Yong Wu
2021-02-01 10:44                     ` Robin Murphy
2020-12-09  8:00 ` [PATCH v5 07/27] iommu/mediatek: Use the common mtk-smi-larb-port.h Yong Wu
2020-12-09  8:00 ` [PATCH v5 08/27] iommu/io-pgtable-arm-v7s: Use ias to check the valid iova in unmap Yong Wu
2020-12-09  8:00 ` [PATCH v5 09/27] iommu/io-pgtable-arm-v7s: Extend PA34 for MediaTek Yong Wu
2020-12-23  8:20   ` Tomasz Figa
2020-12-29 11:17     ` Yong Wu
2020-12-09  8:00 ` [PATCH v5 10/27] iommu/io-pgtable-arm-v7s: Clarify LVL_SHIFT/BITS macro Yong Wu
2020-12-09  8:00 ` [PATCH v5 11/27] iommu/io-pgtable-arm-v7s: Add cfg as a param in some macros Yong Wu
2020-12-09  8:00 ` [PATCH v5 12/27] iommu/io-pgtable-arm-v7s: Quad lvl1 pgtable for MediaTek Yong Wu
2020-12-09  8:00 ` [PATCH v5 13/27] iommu/mediatek: Add a flag for iova_34 bit case Yong Wu
2020-12-09  8:00 ` [PATCH v5 14/27] iommu/mediatek: Move hw_init into attach_device Yong Wu
2020-12-09  8:00 ` [PATCH v5 15/27] iommu/mediatek: Add fail handle for sysfs_add and device_register Yong Wu
2020-12-23  8:25   ` Tomasz Figa
2020-12-29 11:00     ` Yong Wu
2020-12-09  8:00 ` [PATCH v5 16/27] iommu/mediatek: Add device link for smi-common and m4u Yong Wu
2020-12-23  8:29   ` Tomasz Figa
2020-12-29 11:25     ` Yong Wu
2020-12-09  8:00 ` [PATCH v5 17/27] iommu/mediatek: Add pm runtime callback Yong Wu
2020-12-23  8:32   ` Tomasz Figa
2020-12-29 11:06     ` Yong Wu
2020-12-09  8:00 ` [PATCH v5 18/27] iommu/mediatek: Add power-domain operation Yong Wu
2020-12-23  8:36   ` Tomasz Figa
2020-12-29 11:06     ` Yong Wu
2021-01-08  9:54       ` Tomasz Figa
2020-12-09  8:00 ` [PATCH v5 19/27] iommu/mediatek: Add iova reserved function Yong Wu
2020-12-09  8:00 ` [PATCH v5 20/27] iommu/mediatek: Add single domain Yong Wu
2020-12-09  8:00 ` [PATCH v5 21/27] iommu/mediatek: Support master use iova over 32bit Yong Wu
2020-12-09  8:00 ` [PATCH v5 22/27] iommu/mediatek: Support up to 34bit iova in tlb flush Yong Wu
2020-12-09  8:00 ` [PATCH v5 23/27] iommu/mediatek: Support report iova 34bit translation fault in ISR Yong Wu
2020-12-09  8:00 ` [PATCH v5 24/27] iommu/mediatek: Add support for multi domain Yong Wu
2020-12-09  8:01 ` [PATCH v5 25/27] iommu/mediatek: Adjust the structure Yong Wu
2020-12-09  8:01 ` [PATCH v5 26/27] iommu/mediatek: Add mt8192 support Yong Wu
2020-12-09  8:01 ` [PATCH v5 27/27] MAINTAINERS: Add entry for MediaTek IOMMU Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201209080102.26626-2-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=chao.hao@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will@kernel.org \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).