* MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
@ 2018-07-17 16:02 Paul Menzel
2018-07-20 12:31 ` Jörg Rödel
0 siblings, 1 reply; 6+ messages in thread
From: Paul Menzel @ 2018-07-17 16:02 UTC (permalink / raw)
To: Jörg Rödel; +Cc: iommu, Linux Kernel Mailing List
[-- Attachment #1.1: Type: text/plain, Size: 6095 bytes --]
Dear Linux folks,
On a MSI B350M MORTAR with Linux 4.18-rc5+ and Debian Sid/unstable the
three error messages below is shown.
```
$ git log --oneline -1
30b06abfb92b (HEAD -> master, origin/master, origin/HEAD) Merge tag 'pinctrl-v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
$ git describe --dirty
v4.18-rc5-36-g30b06abfb92b
$ dmesg
[…]
[ 0.145696] calling pci_iommu_init+0x0/0x3f @ 1
[ 0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
[ 0.145799] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.145800] pci 0000:00:00.2: PCI INT A: not connected
[ 0.146241] iommu: Adding device 0000:00:01.0 to group 0
[ 0.146449] iommu: Adding device 0000:00:01.2 to group 1
[ 0.146646] iommu: Adding device 0000:00:08.0 to group 2
[ 0.146855] iommu: Adding device 0000:00:08.1 to group 3
[ 0.146881] iommu: Adding device 0000:00:08.2 to group 2
[ 0.147075] iommu: Adding device 0000:00:14.0 to group 4
[ 0.147096] iommu: Adding device 0000:00:14.3 to group 4
[ 0.147304] iommu: Adding device 0000:00:18.0 to group 5
[ 0.147325] iommu: Adding device 0000:00:18.1 to group 5
[ 0.147345] iommu: Adding device 0000:00:18.2 to group 5
[ 0.147366] iommu: Adding device 0000:00:18.3 to group 5
[ 0.147394] iommu: Adding device 0000:00:18.4 to group 5
[ 0.147414] iommu: Adding device 0000:00:18.5 to group 5
[ 0.147435] iommu: Adding device 0000:00:18.6 to group 5
[ 0.147455] iommu: Adding device 0000:00:18.7 to group 5
[ 0.147658] iommu: Adding device 0000:15:00.0 to group 6
[ 0.147692] iommu: Adding device 0000:15:00.1 to group 6
[ 0.147734] iommu: Adding device 0000:15:00.2 to group 6
[ 0.147775] iommu: Adding device 0000:16:00.0 to group 6
[ 0.147833] iommu: Adding device 0000:16:01.0 to group 6
[ 0.147855] iommu: Adding device 0000:16:04.0 to group 6
[ 0.147887] iommu: Adding device 0000:18:00.0 to group 6
[ 0.148157] iommu: Adding device 0000:38:00.0 to group 7
[ 0.148234] iommu: Using direct mapping for device 0000:38:00.0
[ 0.148332] iommu: Adding device 0000:38:00.1 to group 8
[ 0.148373] iommu: Adding device 0000:38:00.2 to group 8
[ 0.148412] iommu: Adding device 0000:38:00.3 to group 8
[ 0.148452] iommu: Adding device 0000:38:00.4 to group 8
[ 0.148491] iommu: Adding device 0000:38:00.6 to group 8
[ 0.148514] iommu: Adding device 0000:39:00.0 to group 2
[ 0.148759] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.148759] AMD-Vi: Extended features (0x4f77ef22294ada):
[ 0.148760] PPR NX GT IA GA PC GA_vAPIC
[ 0.148762] AMD-Vi: Interrupt remapping enabled
[ 0.148762] AMD-Vi: virtual APIC enabled
[ 0.186463] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.187307] initcall pci_iommu_init+0x0/0x3f returned 0 after 40631 usecs
[…]
```
Is that a firmware problem, or can this be fixed in GNU/Linux?
Kind regards,
Paul
PS: Output of `lspci -nn`.
```
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d0]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d1]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d3]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15db]
00:08.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15dc]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e8]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e9]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ea]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15eb]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ec]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ed]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ee]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ef]
15:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller [1022:43bb] (rev 02)
15:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller [1022:43b7] (rev 02)
15:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b2] (rev 02)
16:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
16:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
16:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
18:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
38:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c8)
38:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
38:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:15df]
38:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e0]
38:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e1]
38:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e3]
39:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61)
```
[-- Attachment #1.2: 20180717–linux_4.18-rc5+–dmesg.txt --]
[-- Type: text/plain, Size: 148156 bytes --]
[ 0.000000] Linux version 4.18.0-rc5+ (paul@tokeiihto) (gcc version 8.1.0 (Debian 8.1.0-10)) #1 SMP Tue Jul 17 11:43:33 CEST 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-rc5+ root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro noisapnp cryptomgr.notests apparmor=0 log_buf_len=4M initcall_debug quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000009d1e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d1e6000-0x000000009d2d5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d2d6000-0x000000009d3c7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d3c8000-0x000000009d790fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d791000-0x000000009e5bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e5c0000-0x000000009e664fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e665000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x9d3c8000 ACPI=0x9d3c8000 SMBIOS=0x9e48d000 ESRT=0x9a826f98 MEMATTR=0x9a08e698
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.G1 05/17/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x41f340 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000009a826f98 to 0x000000009a826fd0.
[ 0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x261445000, 0x261445fff] PGTABLE
[ 0.000000] BRK [0x261446000, 0x261446fff] PGTABLE
[ 0.000000] BRK [0x261447000, 0x261447fff] PGTABLE
[ 0.000000] BRK [0x261448000, 0x261448fff] PGTABLE
[ 0.000000] BRK [0x261449000, 0x261449fff] PGTABLE
[ 0.000000] BRK [0x26144a000, 0x26144afff] PGTABLE
[ 0.000000] BRK [0x26144b000, 0x26144bfff] PGTABLE
[ 0.000000] BRK [0x26144c000, 0x26144cfff] PGTABLE
[ 0.000000] BRK [0x26144d000, 0x26144dfff] PGTABLE
[ 0.000000] BRK [0x26144e000, 0x26144efff] PGTABLE
[ 0.000000] BRK [0x26144f000, 0x26144ffff] PGTABLE
[ 0.000000] BRK [0x261450000, 0x261450fff] PGTABLE
[ 0.000000] log_buf_len: 4194304 bytes
[ 0.000000] early log buf free: 125560(95%)
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36b23000-0x37588fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009D3C8000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D3C80A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D3CF8B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x000000009D3C81F0 0076C7 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000009D77AE00 000040
[ 0.000000] ACPI: APIC 0x000000009D3CF9D0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D3CFAB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000009D3CFAF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009D3CFB98 005367 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.000000] ACPI: SSDT 0x000000009D3D4F00 0007DC (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x000000009D3D56E0 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x000000009D3D5EF0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D3D5F20 002D89 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x000000009D3D8CB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009D3D8CF0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: UEFI 0x000000009D3D8D28 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: IVRS 0x000000009D3D8D70 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x000000009D3D8E40 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009D3D8E78 000E96 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000009D3D9D10 000850 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000009D3DA560 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000009D3DBFA8 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x000000009D3DC0A0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff]
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f33ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009d7ffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x000000009d1e5fff]
[ 0.000000] node 0: [mem 0x000000009d2d6000-0x000000009d3c7fff]
[ 0.000000] node 0: [mem 0x000000009e665000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f33ffff]
[ 0.000000] Reserved but unavailable: 9880 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
[ 0.000000] On node 0 totalpages: 3919016
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 28 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10024 pages used for memmap
[ 0.000000] DMA32 zone: 641481 pages, LIFO batch:31
[ 0.000000] Normal zone: 51149 pages used for memmap
[ 0.000000] Normal zone: 3273536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d1e6000-0x9d2d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d3c8000-0x9d790fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d791000-0x9e5bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e5c0000-0x9e664fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144
[ 0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3857751
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-rc5+ root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro noisapnp cryptomgr.notests apparmor=0 log_buf_len=4M initcall_debug quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15238692K/15676064K available (10252K kernel code, 1220K rwdata, 3232K rodata, 1544K init, 652K bss, 437372K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 31036 entries in 122 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] calling con_init+0x0/0x21c @ 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] initcall con_init+0x0/0x21c returned 0 after 0 usecs
[ 0.000000] calling hvc_console_init+0x0/0x14 @ 0
[ 0.000000] initcall hvc_console_init+0x0/0x14 returned 0 after 0 usecs
[ 0.000000] calling xen_cons_init+0x0/0x50 @ 0
[ 0.000000] initcall xen_cons_init+0x0/0x50 returned 0 after 0 usecs
[ 0.000000] calling univ8250_console_init+0x0/0x27 @ 0
[ 0.000000] initcall univ8250_console_init+0x0/0x27 returned 0 after 0 usecs
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] Switched APIC routing to physical flat.
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration failed
[ 0.032000] tsc: PIT calibration matches HPET. 1 loops
[ 0.032000] tsc: Detected 3500.087 MHz processor
[ 0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3273a380f38, max_idle_ns: 440795352925 ns
[ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.17 BogoMIPS (lpj=14000348)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.032000] Security Framework initialized
[ 0.032000] Yama: becoming mindful.
[ 0.032000] calling selinux_init+0x0/0x1c7 @ 0
[ 0.032000] initcall selinux_init+0x0/0x1c7 returned 0 after 0 usecs
[ 0.032000] calling tomoyo_init+0x0/0x5b @ 0
[ 0.032000] initcall tomoyo_init+0x0/0x5b returned 0 after 0 usecs
[ 0.032000] calling apparmor_init+0x0/0x2d5 @ 0
[ 0.032000] AppArmor: AppArmor disabled by boot time parameter
[ 0.032000] initcall apparmor_init+0x0/0x2d5 returned 0 after 0 usecs
[ 0.032000] calling integrity_iintcache_init+0x0/0x2e @ 0
[ 0.032000] initcall integrity_iintcache_init+0x0/0x2e returned 0 after 0 usecs
[ 0.037250] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.038495] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.038605] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.038642] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.039106] CPU: Physical Processor ID: 0
[ 0.039107] CPU: Processor Core ID: 0
[ 0.039213] mce: CPU supports 23 MCE banks
[ 0.039229] LVT offset 1 assigned for vector 0xf9
[ 0.039276] LVT offset 2 assigned for vector 0xf4
[ 0.039286] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.039286] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.039287] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.039288] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.039289] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.042899] Freeing SMP alternatives memory: 24K
[ 0.048000] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[ 0.048000] calling trace_init_flags_sys_exit+0x0/0xf @ 1
[ 0.048000] initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
[ 0.048000] calling trace_init_flags_sys_enter+0x0/0xf @ 1
[ 0.048000] initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
[ 0.048000] calling init_hw_perf_events+0x0/0x5d2 @ 1
[ 0.048000] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.048000] ... version: 0
[ 0.048000] ... bit width: 48
[ 0.048000] ... generic registers: 6
[ 0.048000] ... value mask: 0000ffffffffffff
[ 0.048000] ... max period: 00007fffffffffff
[ 0.048000] ... fixed-purpose events: 0
[ 0.048000] ... event mask: 000000000000003f
[ 0.048000] initcall init_hw_perf_events+0x0/0x5d2 returned 0 after 0 usecs
[ 0.048000] calling init_real_mode+0x0/0x1b3 @ 1
[ 0.048000] initcall init_real_mode+0x0/0x1b3 returned 0 after 0 usecs
[ 0.048000] calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
[ 0.048000] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.048000] calling register_nmi_cpu_backtrace_handler+0x0/0x16 @ 1
[ 0.048000] initcall register_nmi_cpu_backtrace_handler+0x0/0x16 returned 0 after 0 usecs
[ 0.048000] calling early_efi_map_fb+0x0/0x34 @ 1
[ 0.048000] initcall early_efi_map_fb+0x0/0x34 returned 0 after 0 usecs
[ 0.048000] calling spawn_ksoftirqd+0x0/0x40 @ 1
[ 0.048000] initcall spawn_ksoftirqd+0x0/0x40 returned 0 after 0 usecs
[ 0.048000] calling migration_init+0x0/0x34 @ 1
[ 0.048000] initcall migration_init+0x0/0x34 returned 0 after 0 usecs
[ 0.048000] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.048000] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.048000] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.048000] Hierarchical SRCU implementation.
[ 0.048000] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.048000] calling rcu_spawn_gp_kthread+0x0/0x128 @ 1
[ 0.048000] initcall rcu_spawn_gp_kthread+0x0/0x128 returned 0 after 0 usecs
[ 0.048000] calling cpu_stop_init+0x0/0x8d @ 1
[ 0.048000] initcall cpu_stop_init+0x0/0x8d returned 0 after 0 usecs
[ 0.048000] calling init_events+0x0/0x40 @ 1
[ 0.048000] initcall init_events+0x0/0x40 returned 0 after 0 usecs
[ 0.048000] calling init_trace_printk+0x0/0xc @ 1
[ 0.048000] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[ 0.048000] calling event_trace_enable_again+0x0/0x21 @ 1
[ 0.048000] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[ 0.048000] calling jump_label_init_module+0x0/0x11 @ 1
[ 0.048000] initcall jump_label_init_module+0x0/0x11 returned 0 after 0 usecs
[ 0.048000] calling dynamic_debug_init+0x0/0x23a @ 1
[ 0.048000] initcall dynamic_debug_init+0x0/0x23a returned 0 after 0 usecs
[ 0.048000] calling rand_initialize+0x0/0x60 @ 1
[ 0.048000] initcall rand_initialize+0x0/0x60 returned 0 after 0 usecs
[ 0.048000] calling initialize_ptr_random+0x0/0x35 @ 1
[ 0.048000] initcall initialize_ptr_random+0x0/0x35 returned 0 after 0 usecs
[ 0.048000] smp: Bringing up secondary CPUs ...
[ 0.048000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.048000] x86: Booting SMP configuration:
[ 0.048000] .... node #0, CPUs: #1 #2 #3
[ 0.054472] smp: Brought up 1 node, 4 CPUs
[ 0.054472] smpboot: Max logical packages: 4
[ 0.054472] smpboot: Total of 4 processors activated (28000.69 BogoMIPS)
[ 0.054472] devtmpfs: initialized
[ 0.056026] x86/mm: Memory block size: 128MB
[ 0.057423] calling ipc_ns_init+0x0/0x57 @ 1
[ 0.057432] initcall ipc_ns_init+0x0/0x57 returned 0 after 0 usecs
[ 0.057433] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.057435] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.057437] calling net_ns_init+0x0/0x106 @ 1
[ 0.057472] initcall net_ns_init+0x0/0x106 returned 0 after 0 usecs
[ 0.057472] calling xen_pvh_gnttab_setup+0x0/0x34 @ 1
[ 0.057472] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[ 0.057472] calling e820__register_nvs_regions+0x0/0x38 @ 1
[ 0.057472] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
[ 0.057472] PM: Registering ACPI NVS region [mem 0x9d3c8000-0x9d790fff] (3969024 bytes)
[ 0.057472] initcall e820__register_nvs_regions+0x0/0x38 returned 0 after 0 usecs
[ 0.057472] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.057472] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.057472] calling init_cpu_syscore+0x0/0xf @ 1
[ 0.057472] initcall init_cpu_syscore+0x0/0xf returned 0 after 0 usecs
[ 0.057472] calling reboot_init+0x0/0x3d @ 1
[ 0.057472] initcall reboot_init+0x0/0x3d returned 0 after 0 usecs
[ 0.057472] calling init_lapic_sysfs+0x0/0x21 @ 1
[ 0.057472] initcall init_lapic_sysfs+0x0/0x21 returned 0 after 0 usecs
[ 0.057472] calling cpu_hotplug_pm_sync_init+0x0/0x14 @ 1
[ 0.057472] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs
[ 0.057472] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.057472] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.057472] calling wq_sysfs_init+0x0/0x2b @ 1
[ 0.057472] initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs
[ 0.057472] calling ksysfs_init+0x0/0x93 @ 1
[ 0.057472] initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs
[ 0.057472] calling pm_init+0x0/0x78 @ 1
[ 0.057472] initcall pm_init+0x0/0x78 returned 0 after 0 usecs
[ 0.057472] calling pm_disk_init+0x0/0x18 @ 1
[ 0.057472] initcall pm_disk_init+0x0/0x18 returned 0 after 0 usecs
[ 0.057472] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.057472] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.057472] calling rcu_set_runtime_mode+0x0/0x12 @ 1
[ 0.057472] initcall rcu_set_runtime_mode+0x0/0x12 returned 0 after 0 usecs
[ 0.057472] calling init_jiffies_clocksource+0x0/0x18 @ 1
[ 0.057472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.057472] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after 0 usecs
[ 0.057472] calling futex_init+0x0/0xf9 @ 1
[ 0.057472] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.057472] initcall futex_init+0x0/0xf9 returned 0 after 0 usecs
[ 0.057472] calling cgroup_wq_init+0x0/0x2e @ 1
[ 0.057472] initcall cgroup_wq_init+0x0/0x2e returned 0 after 0 usecs
[ 0.057472] calling cgroup1_wq_init+0x0/0x2e @ 1
[ 0.057472] initcall cgroup1_wq_init+0x0/0x2e returned 0 after 0 usecs
[ 0.057472] calling ftrace_mod_cmd_init+0x0/0xc @ 1
[ 0.057472] initcall ftrace_mod_cmd_init+0x0/0xc returned 0 after 0 usecs
[ 0.057472] calling init_graph_trace+0x0/0x5d @ 1
[ 0.057472] initcall init_graph_trace+0x0/0x5d returned 0 after 0 usecs
[ 0.057472] calling init_per_zone_wmark_min+0x0/0x70 @ 1
[ 0.057472] initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 0 usecs
[ 0.057472] calling init_zero_pfn+0x0/0x38 @ 1
[ 0.057472] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
[ 0.057472] calling memory_failure_init+0x0/0x9f @ 1
[ 0.057472] initcall memory_failure_init+0x0/0x9f returned 0 after 0 usecs
[ 0.057472] calling fsnotify_init+0x0/0x49 @ 1
[ 0.057472] initcall fsnotify_init+0x0/0x49 returned 0 after 0 usecs
[ 0.057472] calling filelock_init+0x0/0x8c @ 1
[ 0.057472] initcall filelock_init+0x0/0x8c returned 0 after 0 usecs
[ 0.057472] calling init_script_binfmt+0x0/0x16 @ 1
[ 0.057472] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.057472] calling init_elf_binfmt+0x0/0x16 @ 1
[ 0.057472] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.057472] calling init_compat_elf_binfmt+0x0/0x16 @ 1
[ 0.057472] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.057472] calling debugfs_init+0x0/0x51 @ 1
[ 0.057472] initcall debugfs_init+0x0/0x51 returned 0 after 0 usecs
[ 0.057472] calling tracefs_init+0x0/0x3b @ 1
[ 0.057472] initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
[ 0.057472] calling securityfs_init+0x0/0x69 @ 1
[ 0.057472] initcall securityfs_init+0x0/0x69 returned 0 after 0 usecs
[ 0.057472] calling prandom_init+0x0/0xb8 @ 1
[ 0.057472] initcall prandom_init+0x0/0xb8 returned 0 after 0 usecs
[ 0.057472] calling pinctrl_init+0x0/0xae @ 1
[ 0.057472] pinctrl core: initialized pinctrl subsystem
[ 0.057472] initcall pinctrl_init+0x0/0xae returned 0 after 0 usecs
[ 0.057472] calling gpiolib_dev_init+0x0/0xcb @ 1
[ 0.057472] initcall gpiolib_dev_init+0x0/0xcb returned 0 after 0 usecs
[ 0.057472] calling sfi_sysfs_init+0x0/0xcd @ 1
[ 0.057472] initcall sfi_sysfs_init+0x0/0xcd returned 0 after 0 usecs
[ 0.057472] calling regulator_init+0x0/0x8c @ 1
[ 0.057472] initcall regulator_init+0x0/0x8c returned 0 after 0 usecs
[ 0.057472] calling iommu_init+0x0/0x2b @ 1
[ 0.057472] initcall iommu_init+0x0/0x2b returned 0 after 0 usecs
[ 0.057472] calling component_debug_init+0x0/0x1d @ 1
[ 0.057472] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.057472] calling opp_debug_init+0x0/0x3c @ 1
[ 0.057472] initcall opp_debug_init+0x0/0x3c returned 0 after 0 usecs
[ 0.057472] calling cpufreq_core_init+0x0/0x4c @ 1
[ 0.057472] initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs
[ 0.057472] calling cpuidle_init+0x0/0x3b @ 1
[ 0.057472] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.057472] calling capsule_reboot_register+0x0/0x11 @ 1
[ 0.057472] initcall capsule_reboot_register+0x0/0x11 returned 0 after 0 usecs
[ 0.057472] calling bsp_pm_check_init+0x0/0x14 @ 1
[ 0.057472] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs
[ 0.057472] calling sock_init+0x0/0x9a @ 1
[ 0.057472] initcall sock_init+0x0/0x9a returned 0 after 0 usecs
[ 0.057472] calling net_inuse_init+0x0/0x24 @ 1
[ 0.057472] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.057472] calling net_defaults_init+0x0/0x24 @ 1
[ 0.057472] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.057472] calling init_default_flow_dissectors+0x0/0x50 @ 1
[ 0.057472] initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
[ 0.057472] calling netpoll_init+0x0/0x28 @ 1
[ 0.057472] initcall netpoll_init+0x0/0x28 returned 0 after 0 usecs
[ 0.057472] calling netlink_proto_init+0x0/0x160 @ 1
[ 0.057472] NET: Registered protocol family 16
[ 0.057472] initcall netlink_proto_init+0x0/0x160 returned 0 after 0 usecs
[ 0.057472] calling __gnttab_init+0x0/0x30 @ 1
[ 0.057472] initcall __gnttab_init+0x0/0x30 returned -19 after 0 usecs
[ 0.057476] calling irq_sysfs_init+0x0/0x94 @ 1
[ 0.057538] initcall irq_sysfs_init+0x0/0x94 returned 0 after 0 usecs
[ 0.057539] calling audit_init+0x0/0x16c @ 1
[ 0.057540] audit: initializing netlink subsys (disabled)
[ 0.057543] initcall audit_init+0x0/0x16c returned 0 after 0 usecs
[ 0.057543] calling bdi_class_init+0x0/0x49 @ 1
[ 0.057543] audit: type=2000 audit(1531839057.056:1): state=initialized audit_enabled=0 res=1
[ 0.057543] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[ 0.057543] calling mm_sysfs_init+0x0/0x29 @ 1
[ 0.057543] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.057543] calling gpiolib_sysfs_init+0x0/0xa0 @ 1
[ 0.057543] initcall gpiolib_sysfs_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.057543] calling pcibus_class_init+0x0/0x18 @ 1
[ 0.057543] initcall pcibus_class_init+0x0/0x18 returned 0 after 0 usecs
[ 0.057543] calling pci_driver_init+0x0/0x22 @ 1
[ 0.057543] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.057543] calling backlight_class_init+0x0/0xa6 @ 1
[ 0.057543] initcall backlight_class_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.057543] calling xenbus_init+0x0/0x2a1 @ 1
[ 0.057543] initcall xenbus_init+0x0/0x2a1 returned -19 after 0 usecs
[ 0.057543] calling tty_class_init+0x0/0x34 @ 1
[ 0.057543] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.057543] calling vtconsole_class_init+0x0/0xd8 @ 1
[ 0.057543] initcall vtconsole_class_init+0x0/0xd8 returned 0 after 0 usecs
[ 0.057543] calling iommu_dev_init+0x0/0x18 @ 1
[ 0.057543] initcall iommu_dev_init+0x0/0x18 returned 0 after 0 usecs
[ 0.057543] calling mipi_dsi_bus_init+0x0/0x11 @ 1
[ 0.057543] initcall mipi_dsi_bus_init+0x0/0x11 returned 0 after 0 usecs
[ 0.057543] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.057543] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.057543] calling register_node_type+0x0/0x2f @ 1
[ 0.057543] initcall register_node_type+0x0/0x2f returned 0 after 0 usecs
[ 0.057543] calling regmap_initcall+0x0/0xd @ 1
[ 0.057543] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
[ 0.057543] calling spi_init+0x0/0x99 @ 1
[ 0.057543] initcall spi_init+0x0/0x99 returned 0 after 0 usecs
[ 0.057543] calling i2c_init+0x0/0xb4 @ 1
[ 0.057543] initcall i2c_init+0x0/0xb4 returned 0 after 0 usecs
[ 0.057543] calling init_ladder+0x0/0x24 @ 1
[ 0.057543] cpuidle: using governor ladder
[ 0.057543] initcall init_ladder+0x0/0x24 returned 0 after 0 usecs
[ 0.057543] calling init_menu+0x0/0x11 @ 1
[ 0.057543] cpuidle: using governor menu
[ 0.057543] initcall init_menu+0x0/0x11 returned 0 after 0 usecs
[ 0.057543] calling pcc_init+0x0/0x93 @ 1
[ 0.057543] initcall pcc_init+0x0/0x93 returned -19 after 0 usecs
[ 0.057543] calling amd_postcore_init+0x0/0x115 @ 1
[ 0.057543] initcall amd_postcore_init+0x0/0x115 returned 0 after 0 usecs
[ 0.057543] calling kobject_uevent_init+0x0/0xc @ 1
[ 0.057543] initcall kobject_uevent_init+0x0/0xc returned 0 after 0 usecs
[ 0.057543] calling bts_init+0x0/0xbb @ 1
[ 0.057543] initcall bts_init+0x0/0xbb returned -19 after 0 usecs
[ 0.057543] calling pt_init+0x0/0x352 @ 1
[ 0.057543] initcall pt_init+0x0/0x352 returned -19 after 0 usecs
[ 0.057543] calling boot_params_ksysfs_init+0x0/0x271 @ 1
[ 0.057543] initcall boot_params_ksysfs_init+0x0/0x271 returned 0 after 0 usecs
[ 0.057543] calling sbf_init+0x0/0xcb @ 1
[ 0.057543] initcall sbf_init+0x0/0xcb returned 0 after 0 usecs
[ 0.057543] calling arch_kdebugfs_init+0x0/0x24 @ 1
[ 0.057543] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.057543] calling intel_pconfig_init+0x0/0xe9 @ 1
[ 0.057543] initcall intel_pconfig_init+0x0/0xe9 returned 0 after 0 usecs
[ 0.057543] calling mtrr_if_init+0x0/0x5e @ 1
[ 0.057543] initcall mtrr_if_init+0x0/0x5e returned 0 after 0 usecs
[ 0.057543] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.057543] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 0.057543] calling kvm_setup_pv_tlb_flush+0x0/0x76 @ 1
[ 0.057543] initcall kvm_setup_pv_tlb_flush+0x0/0x76 returned 0 after 0 usecs
[ 0.057543] calling activate_jump_labels+0x0/0x32 @ 1
[ 0.057543] initcall activate_jump_labels+0x0/0x32 returned 0 after 0 usecs
[ 0.057543] calling gigantic_pages_init+0x0/0x2f @ 1
[ 0.057543] initcall gigantic_pages_init+0x0/0x2f returned 0 after 0 usecs
[ 0.057543] calling kcmp_cookies_init+0x0/0x38 @ 1
[ 0.057543] initcall kcmp_cookies_init+0x0/0x38 returned 0 after 0 usecs
[ 0.057543] calling acpi_pci_init+0x0/0x62 @ 1
[ 0.057543] ACPI: bus type PCI registered
[ 0.057543] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.057543] initcall acpi_pci_init+0x0/0x62 returned 0 after 0 usecs
[ 0.057543] calling dma_bus_init+0x0/0xd5 @ 1
[ 0.057543] initcall dma_bus_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.057543] calling dma_channel_table_init+0x0/0xd7 @ 1
[ 0.057543] initcall dma_channel_table_init+0x0/0xd7 returned 0 after 0 usecs
[ 0.057543] calling setup_vcpu_hotplug_event+0x0/0x31 @ 1
[ 0.057543] initcall setup_vcpu_hotplug_event+0x0/0x31 returned -19 after 0 usecs
[ 0.057543] calling register_xen_pci_notifier+0x0/0x2d @ 1
[ 0.057543] initcall register_xen_pci_notifier+0x0/0x2d returned 0 after 0 usecs
[ 0.057543] calling xen_pcpu_init+0x0/0xae @ 1
[ 0.057543] initcall xen_pcpu_init+0x0/0xae returned -19 after 0 usecs
[ 0.057543] calling dmi_id_init+0x0/0x33d @ 1
[ 0.060012] initcall dmi_id_init+0x0/0x33d returned 0 after 3906 usecs
[ 0.060013] calling pci_arch_init+0x0/0x66 @ 1
[ 0.060031] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.060033] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.060039] PCI: Using configuration type 1 for base access
[ 0.060041] initcall pci_arch_init+0x0/0x66 returned 0 after 0 usecs
[ 0.060053] calling init_vdso+0x0/0x40 @ 1
[ 0.060059] initcall init_vdso+0x0/0x40 returned 0 after 0 usecs
[ 0.060059] calling sysenter_setup+0x0/0x14 @ 1
[ 0.060059] initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
[ 0.060059] calling fixup_ht_bug+0x0/0xa2 @ 1
[ 0.060059] initcall fixup_ht_bug+0x0/0xa2 returned 0 after 0 usecs
[ 0.060059] calling topology_init+0x0/0xba @ 1
[ 0.060290] initcall topology_init+0x0/0xba returned 0 after 0 usecs
[ 0.060291] calling mtrr_init_finialize+0x0/0x3f @ 1
[ 0.060292] initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs
[ 0.060293] calling uid_cache_init+0x0/0x9a @ 1
[ 0.060295] initcall uid_cache_init+0x0/0x9a returned 0 after 0 usecs
[ 0.060296] calling param_sysfs_init+0x0/0x1ef @ 1
[ 0.060723] initcall param_sysfs_init+0x0/0x1ef returned 0 after 0 usecs
[ 0.060724] calling user_namespace_sysctl_init+0x0/0x34 @ 1
[ 0.060737] initcall user_namespace_sysctl_init+0x0/0x34 returned 0 after 0 usecs
[ 0.060738] calling proc_schedstat_init+0x0/0x25 @ 1
[ 0.060740] initcall proc_schedstat_init+0x0/0x25 returned 0 after 0 usecs
[ 0.060741] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.060746] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.060746] calling create_proc_profile+0x0/0xd0 @ 1
[ 0.060746] initcall create_proc_profile+0x0/0xd0 returned 0 after 0 usecs
[ 0.060746] calling crash_save_vmcoreinfo_init+0x0/0x5db @ 1
[ 0.060746] initcall crash_save_vmcoreinfo_init+0x0/0x5db returned 0 after 0 usecs
[ 0.060746] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.060746] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.060746] calling cgroup_sysfs_init+0x0/0x18 @ 1
[ 0.060746] initcall cgroup_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.060746] calling cgroup_namespaces_init+0x0/0x8 @ 1
[ 0.060746] initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
[ 0.060746] calling user_namespaces_init+0x0/0x2d @ 1
[ 0.060746] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
[ 0.060746] calling hung_task_init+0x0/0x4f @ 1
[ 0.060746] initcall hung_task_init+0x0/0x4f returned 0 after 0 usecs
[ 0.060746] calling dev_map_init+0x0/0x14 @ 1
[ 0.060746] initcall dev_map_init+0x0/0x14 returned 0 after 0 usecs
[ 0.060746] calling bpf_offload_init+0x0/0x14 @ 1
[ 0.060746] initcall bpf_offload_init+0x0/0x14 returned 0 after 0 usecs
[ 0.060746] calling stack_map_init+0x0/0x4e @ 1
[ 0.060746] initcall stack_map_init+0x0/0x4e returned 0 after 0 usecs
[ 0.060746] calling oom_init+0x0/0x30 @ 1
[ 0.060746] initcall oom_init+0x0/0x30 returned 0 after 0 usecs
[ 0.060746] calling cgwb_init+0x0/0x2e @ 1
[ 0.060747] initcall cgwb_init+0x0/0x2e returned 0 after 0 usecs
[ 0.060747] calling default_bdi_init+0x0/0xad @ 1
[ 0.060747] initcall default_bdi_init+0x0/0xad returned 0 after 0 usecs
[ 0.060747] calling percpu_enable_async+0x0/0xf @ 1
[ 0.060747] initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
[ 0.060747] calling kcompactd_init+0x0/0x90 @ 1
[ 0.060747] initcall kcompactd_init+0x0/0x90 returned 0 after 0 usecs
[ 0.060747] calling init_reserve_notifier+0x0/0x1f @ 1
[ 0.060747] initcall init_reserve_notifier+0x0/0x1f returned 0 after 0 usecs
[ 0.060747] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.060747] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.060747] calling init_user_reserve+0x0/0x40 @ 1
[ 0.060747] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.060747] calling swap_init_sysfs+0x0/0x63 @ 1
[ 0.060747] initcall swap_init_sysfs+0x0/0x63 returned 0 after 0 usecs
[ 0.060747] calling swapfile_init+0x0/0xad @ 1
[ 0.060747] initcall swapfile_init+0x0/0xad returned 0 after 0 usecs
[ 0.060747] calling hugetlb_init+0x0/0x4fa @ 1
[ 0.060747] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.060747] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.060747] initcall hugetlb_init+0x0/0x4fa returned 0 after 0 usecs
[ 0.060747] calling ksm_init+0x0/0x197 @ 1
[ 0.060747] initcall ksm_init+0x0/0x197 returned 0 after 0 usecs
[ 0.060747] calling hugepage_init+0x0/0x155 @ 1
[ 0.060747] initcall hugepage_init+0x0/0x155 returned 0 after 0 usecs
[ 0.060747] calling mem_cgroup_swap_init+0x0/0x52 @ 1
[ 0.060747] initcall mem_cgroup_swap_init+0x0/0x52 returned 0 after 0 usecs
[ 0.060747] calling mem_cgroup_init+0x0/0x14b @ 1
[ 0.060747] initcall mem_cgroup_init+0x0/0x14b returned 0 after 0 usecs
[ 0.060747] calling sel_ib_pkey_init+0x0/0x36 @ 1
[ 0.060747] initcall sel_ib_pkey_init+0x0/0x36 returned 0 after 0 usecs
[ 0.060747] calling crypto_wq_init+0x0/0x31 @ 1
[ 0.060747] initcall crypto_wq_init+0x0/0x31 returned 0 after 0 usecs
[ 0.060747] calling cryptomgr_init+0x0/0x11 @ 1
[ 0.060747] initcall cryptomgr_init+0x0/0x11 returned 0 after 0 usecs
[ 0.060747] calling init_bio+0x0/0xd2 @ 1
[ 0.060747] initcall init_bio+0x0/0xd2 returned 0 after 0 usecs
[ 0.060747] calling blk_settings_init+0x0/0x2a @ 1
[ 0.060747] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.060747] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.060747] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.060747] calling blk_softirq_init+0x0/0x71 @ 1
[ 0.060747] initcall blk_softirq_init+0x0/0x71 returned 0 after 0 usecs
[ 0.060747] calling blk_mq_init+0x0/0x2a @ 1
[ 0.060747] initcall blk_mq_init+0x0/0x2a returned 0 after 0 usecs
[ 0.060747] calling genhd_device_init+0x0/0x76 @ 1
[ 0.060747] initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs
[ 0.060747] calling irq_poll_setup+0x0/0x6c @ 1
[ 0.060747] initcall irq_poll_setup+0x0/0x6c returned 0 after 0 usecs
[ 0.060747] calling byt_gpio_init+0x0/0x13 @ 1
[ 0.060747] initcall byt_gpio_init+0x0/0x13 returned 0 after 0 usecs
[ 0.060747] calling chv_pinctrl_init+0x0/0x13 @ 1
[ 0.060747] initcall chv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.060747] calling bxt_pinctrl_init+0x0/0x13 @ 1
[ 0.060747] initcall bxt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.060747] calling spt_pinctrl_init+0x0/0x13 @ 1
[ 0.060747] initcall spt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.060747] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.060747] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.060747] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.060747] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.060747] calling pwm_sysfs_init+0x0/0x18 @ 1
[ 0.060747] initcall pwm_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.060747] calling pci_slot_init+0x0/0x40 @ 1
[ 0.060747] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.060747] calling fbmem_init+0x0/0xdb @ 1
[ 0.060747] initcall fbmem_init+0x0/0xdb returned 0 after 0 usecs
[ 0.060747] calling scan_for_dmi_ipmi+0x0/0xf4 @ 1
[ 0.060747] initcall scan_for_dmi_ipmi+0x0/0xf4 returned 0 after 0 usecs
[ 0.060747] calling acpi_init+0x0/0x338 @ 1
[ 0.060747] ACPI: Added _OSI(Module Device)
[ 0.060747] ACPI: Added _OSI(Processor Device)
[ 0.060747] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.060747] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.060747] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.068004] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180531/dswload2-316)
[ 0.068004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[ 0.068004] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[ 0.068004] ACPI BIOS Error (bug): Failure creating [\_SB.SMIB], AE_ALREADY_EXISTS (20180531/dsfield-594)
[ 0.068004] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.068789] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.070203] ACPI: Interpreter enabled
[ 0.070214] ACPI: (supports S0 S3 S4 S5)
[ 0.070215] ACPI: Using IOAPIC for interrupt routing
[ 0.070432] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.070654] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.072449] ACPI: Power Resource [P0ST] (on)
[ 0.072467] ACPI: Power Resource [P3ST] (on)
[ 0.080017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.080022] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.080172] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.080313] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.080323] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.080644] PCI host bridge to bus 0000:00
[ 0.080646] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.080648] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.080649] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.080651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.080652] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.080653] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.080655] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.080656] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.080658] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.080668] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[ 0.080676] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.080679] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.080804] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[ 0.080968] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.080975] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.080977] pci 0000:00:01.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.081090] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[ 0.081199] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.081332] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.081338] pci 0000:00:08.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.081340] pci 0000:00:08.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.081459] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[ 0.081514] pci 0000:00:08.1: enabling Extended Tags
[ 0.081570] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.081681] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[ 0.081735] pci 0000:00:08.2: enabling Extended Tags
[ 0.081788] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.081913] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.082095] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.082280] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[ 0.082283] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082285] pci 0000:00:18.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082347] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[ 0.082350] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082352] pci 0000:00:18.1: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082407] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[ 0.082410] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082412] pci 0000:00:18.2: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082466] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[ 0.082469] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082471] pci 0000:00:18.3: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082533] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[ 0.082535] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082537] pci 0000:00:18.4: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082592] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[ 0.082595] pci 0000:00:18.5: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082596] pci 0000:00:18.5: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082657] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[ 0.082660] pci 0000:00:18.6: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082662] pci 0000:00:18.6: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082716] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[ 0.082719] pci 0000:00:18.7: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.082720] pci 0000:00:18.7: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.082869] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.082901] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
[ 0.083008] pci 0000:15:00.0: PME# supported from D3hot D3cold
[ 0.083106] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
[ 0.083172] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
[ 0.083182] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
[ 0.083237] pci 0000:15:00.1: PME# supported from D3hot D3cold
[ 0.083319] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
[ 0.083421] pci 0000:15:00.2: PME# supported from D3hot D3cold
[ 0.083550] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[ 0.083555] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.083559] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.083655] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
[ 0.083772] pci 0000:16:00.0: PME# supported from D3hot D3cold
[ 0.083879] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
[ 0.083995] pci 0000:16:01.0: PME# supported from D3hot D3cold
[ 0.084103] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
[ 0.084219] pci 0000:16:04.0: PME# supported from D3hot D3cold
[ 0.084345] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[ 0.084351] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
[ 0.084355] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.084400] pci 0000:16:00.0: PCI bridge to [bus 17]
[ 0.084485] pci 0000:18:00.0: [10ec:8168] type 00 class 0x020000
[ 0.084534] pci 0000:18:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.084576] pci 0000:18:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
[ 0.084602] pci 0000:18:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.084751] pci 0000:18:00.0: supports D1 D2
[ 0.084752] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.084956] pci 0000:16:01.0: PCI bridge to [bus 18]
[ 0.084962] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
[ 0.084966] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.085026] pci 0000:16:04.0: PCI bridge to [bus 1b]
[ 0.085166] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
[ 0.085212] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.085230] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.085242] pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.085254] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
[ 0.085274] pci 0000:38:00.0: enabling Extended Tags
[ 0.085282] pci 0000:38:00.0: calling quirk_no_pm_reset+0x0/0x20 @ 1
[ 0.085284] pci 0000:38:00.0: quirk_no_pm_reset+0x0/0x20 took 0 usecs
[ 0.085287] pci 0000:38:00.0: calling efifb_fixup_resources+0x0/0x130 @ 1
[ 0.085289] pci 0000:38:00.0: BAR 0: assigned to efifb
[ 0.085291] pci 0000:38:00.0: efifb_fixup_resources+0x0/0x130 took 0 usecs
[ 0.085385] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.085511] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
[ 0.085540] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
[ 0.085612] pci 0000:38:00.1: enabling Extended Tags
[ 0.085676] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.085747] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
[ 0.085797] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
[ 0.085829] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
[ 0.085849] pci 0000:38:00.2: enabling Extended Tags
[ 0.086004] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
[ 0.086039] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
[ 0.086100] pci 0000:38:00.3: enabling Extended Tags
[ 0.086172] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
[ 0.086256] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
[ 0.086290] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
[ 0.086351] pci 0000:38:00.4: enabling Extended Tags
[ 0.086423] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
[ 0.086522] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
[ 0.086551] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
[ 0.086623] pci 0000:38:00.6: enabling Extended Tags
[ 0.086688] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
[ 0.086832] pci 0000:00:08.1: PCI bridge to [bus 38]
[ 0.086837] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.086841] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
[ 0.086846] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.086921] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
[ 0.087004] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
[ 0.087024] pci 0000:39:00.0: enabling Extended Tags
[ 0.087097] pci 0000:39:00.0: PME# supported from D3hot D3cold
[ 0.087210] pci 0000:00:08.2: PCI bridge to [bus 39]
[ 0.087217] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.087639] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087683] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087720] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087769] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087811] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087847] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087882] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.087915] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.088277] initcall acpi_init+0x0/0x338 returned 0 after 27343 usecs
[ 0.088279] calling pnp_init+0x0/0x11 @ 1
[ 0.088283] initcall pnp_init+0x0/0x11 returned 0 after 0 usecs
[ 0.088284] calling balloon_init+0x0/0x1aa @ 1
[ 0.088286] initcall balloon_init+0x0/0x1aa returned -19 after 0 usecs
[ 0.088288] calling xen_setup_shutdown_event+0x0/0x30 @ 1
[ 0.088289] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs
[ 0.088291] calling xenbus_probe_backend_init+0x0/0x4e @ 1
[ 0.088295] initcall xenbus_probe_backend_init+0x0/0x4e returned 0 after 0 usecs
[ 0.088296] calling xenbus_probe_frontend_init+0x0/0x4e @ 1
[ 0.088307] initcall xenbus_probe_frontend_init+0x0/0x4e returned 0 after 0 usecs
[ 0.088308] calling xen_acpi_pad_init+0x0/0x3c @ 1
[ 0.088310] initcall xen_acpi_pad_init+0x0/0x3c returned -19 after 0 usecs
[ 0.088311] calling misc_init+0x0/0xbf @ 1
[ 0.088315] initcall misc_init+0x0/0xbf returned 0 after 0 usecs
[ 0.088316] calling vga_arb_device_init+0x0/0x248 @ 1
[ 0.088325] pci 0000:38:00.0: vgaarb: setting as boot VGA device
[ 0.088325] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.088325] pci 0000:38:00.0: vgaarb: bridge control possible
[ 0.088325] vgaarb: loaded
[ 0.088325] initcall vga_arb_device_init+0x0/0x248 returned 0 after 0 usecs
[ 0.088325] calling cn_init+0x0/0xf0 @ 1
[ 0.088325] initcall cn_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.088325] calling dax_fs_init+0x0/0xbf @ 1
[ 0.088325] initcall dax_fs_init+0x0/0xbf returned 0 after 0 usecs
[ 0.088325] calling dma_buf_init+0x0/0xaa @ 1
[ 0.088325] initcall dma_buf_init+0x0/0xaa returned 0 after 0 usecs
[ 0.088325] calling serio_init+0x0/0x2a @ 1
[ 0.088325] initcall serio_init+0x0/0x2a returned 0 after 0 usecs
[ 0.088325] calling input_init+0x0/0xfd @ 1
[ 0.088325] initcall input_init+0x0/0xfd returned 0 after 0 usecs
[ 0.088325] calling rtc_init+0x0/0x4c @ 1
[ 0.088325] initcall rtc_init+0x0/0x4c returned 0 after 0 usecs
[ 0.088325] calling dw_i2c_init_driver+0x0/0x13 @ 1
[ 0.088325] initcall dw_i2c_init_driver+0x0/0x13 returned 0 after 0 usecs
[ 0.088325] calling pps_init+0x0/0xaa @ 1
[ 0.088325] pps_core: LinuxPPS API ver. 1 registered
[ 0.088325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.088325] initcall pps_init+0x0/0xaa returned 0 after 0 usecs
[ 0.088325] calling ptp_init+0x0/0x99 @ 1
[ 0.088325] PTP clock support registered
[ 0.088325] initcall ptp_init+0x0/0x99 returned 0 after 0 usecs
[ 0.088325] calling power_supply_class_init+0x0/0x40 @ 1
[ 0.088325] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.088325] calling hwmon_init+0x0/0xf9 @ 1
[ 0.088325] initcall hwmon_init+0x0/0xf9 returned 0 after 0 usecs
[ 0.088325] calling edac_init+0x0/0x70 @ 1
[ 0.088325] EDAC MC: Ver: 3.0.0
[ 0.088325] initcall edac_init+0x0/0x70 returned 0 after 0 usecs
[ 0.088325] calling leds_init+0x0/0x3c @ 1
[ 0.088325] initcall leds_init+0x0/0x3c returned 0 after 0 usecs
[ 0.088325] calling dmi_init+0x0/0x114 @ 1
[ 0.088325] initcall dmi_init+0x0/0x114 returned 0 after 0 usecs
[ 0.088325] calling efisubsys_init+0x0/0x2cf @ 1
[ 0.088325] Registered efivars operations
[ 0.104085] initcall efisubsys_init+0x0/0x2cf returned 0 after 15625 usecs
[ 0.104086] calling devfreq_init+0x0/0xa1 @ 1
[ 0.104092] initcall devfreq_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.104092] calling ras_init+0x0/0xf @ 1
[ 0.104092] initcall ras_init+0x0/0xf returned 0 after 0 usecs
[ 0.104092] calling nvmem_init+0x0/0x11 @ 1
[ 0.104092] initcall nvmem_init+0x0/0x11 returned 0 after 0 usecs
[ 0.104092] calling pci_subsys_init+0x0/0x67 @ 1
[ 0.104092] PCI: Using ACPI for IRQ routing
[ 0.107014] PCI: pci_cache_line_size set to 64 bytes
[ 0.107093] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[ 0.107094] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.107094] e820: reserve RAM buffer [mem 0x9d1e6000-0x9fffffff]
[ 0.107095] e820: reserve RAM buffer [mem 0x9d3c8000-0x9fffffff]
[ 0.107096] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.107096] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
[ 0.107098] initcall pci_subsys_init+0x0/0x67 returned 0 after 0 usecs
[ 0.107099] calling proto_init+0x0/0x11 @ 1
[ 0.107109] initcall proto_init+0x0/0x11 returned 0 after 0 usecs
[ 0.107110] calling net_dev_init+0x0/0x1ff @ 1
[ 0.107190] initcall net_dev_init+0x0/0x1ff returned 0 after 0 usecs
[ 0.107192] calling neigh_init+0x0/0x80 @ 1
[ 0.107193] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[ 0.107194] calling fib_notifier_init+0x0/0x11 @ 1
[ 0.107195] initcall fib_notifier_init+0x0/0x11 returned 0 after 0 usecs
[ 0.107196] calling fib_rules_init+0x0/0xac @ 1
[ 0.107198] initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
[ 0.107199] calling init_cgroup_netprio+0x0/0x14 @ 1
[ 0.107200] initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
[ 0.107201] calling bpf_lwt_init+0x0/0x16 @ 1
[ 0.107202] initcall bpf_lwt_init+0x0/0x16 returned 0 after 0 usecs
[ 0.107204] calling pktsched_init+0x0/0x10f @ 1
[ 0.107207] initcall pktsched_init+0x0/0x10f returned 0 after 0 usecs
[ 0.107208] calling tc_filter_init+0x0/0xa3 @ 1
[ 0.107212] initcall tc_filter_init+0x0/0xa3 returned 0 after 0 usecs
[ 0.107213] calling tc_action_init+0x0/0x69 @ 1
[ 0.107222] initcall tc_action_init+0x0/0x69 returned 0 after 0 usecs
[ 0.107223] calling genl_init+0x0/0x36 @ 1
[ 0.107227] initcall genl_init+0x0/0x36 returned 0 after 0 usecs
[ 0.107228] calling wireless_nlevent_init+0x0/0x3a @ 1
[ 0.107230] initcall wireless_nlevent_init+0x0/0x3a returned 0 after 0 usecs
[ 0.107231] calling xen_mcfg_late+0x0/0xcd @ 1
[ 0.107233] initcall xen_mcfg_late+0x0/0xcd returned 0 after 0 usecs
[ 0.107234] calling watchdog_init+0x0/0x91 @ 1
[ 0.107236] initcall watchdog_init+0x0/0x91 returned 0 after 0 usecs
[ 0.107236] calling nmi_warning_debugfs+0x0/0x27 @ 1
[ 0.107236] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
[ 0.107236] calling save_microcode_in_initrd+0x0/0x9d @ 1
[ 0.107236] initcall save_microcode_in_initrd+0x0/0x9d returned -22 after 0 usecs
[ 0.107236] calling hpet_late_init+0x0/0x104 @ 1
[ 0.107236] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.107236] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.108002] initcall hpet_late_init+0x0/0x104 returned 0 after 3906 usecs
[ 0.108002] calling init_amd_nbs+0x0/0x115 @ 1
[ 0.108010] initcall init_amd_nbs+0x0/0x115 returned 0 after 0 usecs
[ 0.108011] calling sugov_register+0x0/0x11 @ 1
[ 0.108013] initcall sugov_register+0x0/0x11 returned 0 after 0 usecs
[ 0.108014] calling clocksource_done_booting+0x0/0x42 @ 1
[ 0.108036] clocksource: Switched to clocksource tsc-early
[ 0.108037] initcall clocksource_done_booting+0x0/0x42 returned 0 after 3 usecs
[ 0.108038] calling tracer_init_tracefs+0x0/0x1c6 @ 1
[ 0.117889] initcall tracer_init_tracefs+0x0/0x1c6 returned 0 after 9649 usecs
[ 0.117890] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.117892] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 0 usecs
[ 0.117893] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.117905] initcall init_graph_tracefs+0x0/0x2d returned 0 after 10 usecs
[ 0.117906] calling init_kprobe_trace+0x0/0x8a @ 1
[ 0.117908] initcall init_kprobe_trace+0x0/0x8a returned 0 after 1 usecs
[ 0.117909] calling init_uprobe_trace+0x0/0x4f @ 1
[ 0.117911] initcall init_uprobe_trace+0x0/0x4f returned 0 after 0 usecs
[ 0.117912] calling bpf_init+0x0/0x48 @ 1
[ 0.117917] initcall bpf_init+0x0/0x48 returned 0 after 3 usecs
[ 0.117918] calling init_pipe_fs+0x0/0x47 @ 1
[ 0.117928] initcall init_pipe_fs+0x0/0x47 returned 0 after 8 usecs
[ 0.117929] calling cgroup_writeback_init+0x0/0x2b @ 1
[ 0.117944] initcall cgroup_writeback_init+0x0/0x2b returned 0 after 14 usecs
[ 0.117945] calling inotify_user_setup+0x0/0x48 @ 1
[ 0.117949] initcall inotify_user_setup+0x0/0x48 returned 0 after 2 usecs
[ 0.117950] calling eventpoll_init+0x0/0xc9 @ 1
[ 0.117994] initcall eventpoll_init+0x0/0xc9 returned 0 after 41 usecs
[ 0.117995] calling anon_inode_init+0x0/0x5b @ 1
[ 0.118000] initcall anon_inode_init+0x0/0x5b returned 0 after 4 usecs
[ 0.118001] calling init_dax_wait_table+0x0/0x40 @ 1
[ 0.118014] initcall init_dax_wait_table+0x0/0x40 returned 0 after 12 usecs
[ 0.118015] calling proc_locks_init+0x0/0x28 @ 1
[ 0.118026] initcall proc_locks_init+0x0/0x28 returned 0 after 8 usecs
[ 0.118027] calling dquot_init+0x0/0x11d @ 1
[ 0.118027] VFS: Disk quotas dquot_6.6.0
[ 0.118067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.118069] initcall dquot_init+0x0/0x11d returned 0 after 39 usecs
[ 0.118070] calling quota_init+0x0/0x24 @ 1
[ 0.118083] initcall quota_init+0x0/0x24 returned 0 after 12 usecs
[ 0.118084] calling proc_cmdline_init+0x0/0x22 @ 1
[ 0.118086] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118087] calling proc_consoles_init+0x0/0x25 @ 1
[ 0.118088] initcall proc_consoles_init+0x0/0x25 returned 0 after 0 usecs
[ 0.118089] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.118091] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 0 usecs
[ 0.118092] calling proc_devices_init+0x0/0x25 @ 1
[ 0.118093] initcall proc_devices_init+0x0/0x25 returned 0 after 0 usecs
[ 0.118094] calling proc_interrupts_init+0x0/0x25 @ 1
[ 0.118095] initcall proc_interrupts_init+0x0/0x25 returned 0 after 0 usecs
[ 0.118096] calling proc_loadavg_init+0x0/0x22 @ 1
[ 0.118098] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118098] calling proc_meminfo_init+0x0/0x22 @ 1
[ 0.118100] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118101] calling proc_stat_init+0x0/0x1f @ 1
[ 0.118102] initcall proc_stat_init+0x0/0x1f returned 0 after 0 usecs
[ 0.118103] calling proc_uptime_init+0x0/0x22 @ 1
[ 0.118104] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118105] calling proc_version_init+0x0/0x22 @ 1
[ 0.118107] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118108] calling proc_softirqs_init+0x0/0x22 @ 1
[ 0.118109] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118110] calling proc_kcore_init+0x0/0xd0 @ 1
[ 0.118115] initcall proc_kcore_init+0x0/0xd0 returned 0 after 4 usecs
[ 0.118116] calling vmcore_init+0x0/0x5d8 @ 1
[ 0.118117] initcall vmcore_init+0x0/0x5d8 returned 0 after 0 usecs
[ 0.118118] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.118120] initcall proc_kmsg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.118121] calling proc_page_init+0x0/0x56 @ 1
[ 0.118123] initcall proc_page_init+0x0/0x56 returned 0 after 0 usecs
[ 0.118124] calling init_ramfs_fs+0x0/0x20 @ 1
[ 0.118125] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
[ 0.118126] calling init_hugetlbfs_fs+0x0/0x17e @ 1
[ 0.118177] initcall init_hugetlbfs_fs+0x0/0x17e returned 0 after 48 usecs
[ 0.118178] calling tomoyo_initerface_init+0x0/0x178 @ 1
[ 0.118180] initcall tomoyo_initerface_init+0x0/0x178 returned 0 after 0 usecs
[ 0.118181] calling aa_create_aafs+0x0/0x3ad @ 1
[ 0.118182] initcall aa_create_aafs+0x0/0x3ad returned 0 after 0 usecs
[ 0.118183] calling blk_scsi_ioctl_init+0x0/0x399 @ 1
[ 0.118184] initcall blk_scsi_ioctl_init+0x0/0x399 returned 0 after 0 usecs
[ 0.118185] calling dynamic_debug_init_debugfs+0x0/0x62 @ 1
[ 0.118189] initcall dynamic_debug_init_debugfs+0x0/0x62 returned 0 after 2 usecs
[ 0.118190] calling acpi_event_init+0x0/0x2d @ 1
[ 0.118193] initcall acpi_event_init+0x0/0x2d returned 0 after 1 usecs
[ 0.118195] calling pnp_system_init+0x0/0x11 @ 1
[ 0.118204] initcall pnp_system_init+0x0/0x11 returned 0 after 7 usecs
[ 0.118205] calling pnpacpi_init+0x0/0x6a @ 1
[ 0.118205] pnp: PnP ACPI init
[ 0.118360] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.118364] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118415] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.118418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118508] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.118644] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.118645] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.118646] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.118647] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.118649] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.118899] pnp 00:04: [dma 0 disabled]
[ 0.118980] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.119168] pnp 00:05: [dma 0 disabled]
[ 0.119209] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.119362] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.119363] system 00:06: [io 0x040b] has been reserved
[ 0.119364] system 00:06: [io 0x04d6] has been reserved
[ 0.119365] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.119366] system 00:06: [io 0x0c14] has been reserved
[ 0.119367] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.119368] system 00:06: [io 0x0c52] has been reserved
[ 0.119369] system 00:06: [io 0x0c6c] has been reserved
[ 0.119370] system 00:06: [io 0x0c6f] has been reserved
[ 0.119371] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.119372] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.119373] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.119374] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.119374] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.119375] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.119376] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.119377] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.119378] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.119379] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.119380] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.119381] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.119382] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.119383] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.119385] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.119386] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.119387] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.119389] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119693] pnp: PnP ACPI: found 7 devices
[ 0.119695] initcall pnpacpi_init+0x0/0x6a returned 0 after 1453 usecs
[ 0.119696] calling chr_dev_init+0x0/0xa7 @ 1
[ 0.120925] initcall chr_dev_init+0x0/0xa7 returned 0 after 1199 usecs
[ 0.120927] calling firmware_class_init+0x0/0xeb @ 1
[ 0.120931] initcall firmware_class_init+0x0/0xeb returned 0 after 3 usecs
[ 0.120932] calling thermal_init+0x0/0xe1 @ 1
[ 0.120938] initcall thermal_init+0x0/0xe1 returned 0 after 5 usecs
[ 0.120940] calling cpufreq_gov_performance_init+0x0/0x11 @ 1
[ 0.120941] initcall cpufreq_gov_performance_init+0x0/0x11 returned 0 after 0 usecs
[ 0.120943] calling cpufreq_gov_dbs_init+0x0/0x11 @ 1
[ 0.120944] initcall cpufreq_gov_dbs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.120945] calling map_properties+0x0/0x52b @ 1
[ 0.120946] initcall map_properties+0x0/0x52b returned 0 after 0 usecs
[ 0.120947] calling init_acpi_pm_clocksource+0x0/0xdb @ 1
[ 0.125506] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.125508] initcall init_acpi_pm_clocksource+0x0/0xdb returned 0 after 4453 usecs
[ 0.125509] calling pcibios_assign_resources+0x0/0xca @ 1
[ 0.125574] pci 0000:16:00.0: PCI bridge to [bus 17]
[ 0.125588] pci 0000:16:01.0: PCI bridge to [bus 18]
[ 0.125590] pci 0000:16:01.0: bridge window [io 0xf000-0xffff]
[ 0.125595] pci 0000:16:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.125604] pci 0000:16:04.0: PCI bridge to [bus 1b]
[ 0.125616] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[ 0.125618] pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
[ 0.125622] pci 0000:15:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.125630] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[ 0.125632] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.125637] pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.125645] pci 0000:00:08.1: PCI bridge to [bus 38]
[ 0.125647] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.125651] pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
[ 0.125655] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.125661] pci 0000:00:08.2: PCI bridge to [bus 39]
[ 0.125665] pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.125674] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.125675] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.125676] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.125677] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.125678] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.125679] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.125680] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.125680] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.125682] pci_bus 0000:15: resource 0 [io 0xf000-0xffff]
[ 0.125682] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.125683] pci_bus 0000:16: resource 0 [io 0xf000-0xffff]
[ 0.125684] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.125685] pci_bus 0000:18: resource 0 [io 0xf000-0xffff]
[ 0.125686] pci_bus 0000:18: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.125687] pci_bus 0000:38: resource 0 [io 0xe000-0xefff]
[ 0.125688] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff]
[ 0.125688] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.125690] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.125717] initcall pcibios_assign_resources+0x0/0xca returned 0 after 202 usecs
[ 0.125718] calling sysctl_core_init+0x0/0x2b @ 1
[ 0.125728] initcall sysctl_core_init+0x0/0x2b returned 0 after 9 usecs
[ 0.125729] calling eth_offload_init+0x0/0x14 @ 1
[ 0.125731] initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
[ 0.125732] calling inet_init+0x0/0x272 @ 1
[ 0.125912] NET: Registered protocol family 2
[ 0.126146] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.126181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.126331] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.126447] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.126496] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.126530] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.126612] initcall inet_init+0x0/0x272 returned 0 after 858 usecs
[ 0.126614] calling ipv4_offload_init+0x0/0x74 @ 1
[ 0.126615] initcall ipv4_offload_init+0x0/0x74 returned 0 after 0 usecs
[ 0.126616] calling af_unix_init+0x0/0x4e @ 1
[ 0.126617] NET: Registered protocol family 1
[ 0.126620] initcall af_unix_init+0x0/0x4e returned 0 after 3 usecs
[ 0.126622] calling ipv6_offload_init+0x0/0x7f @ 1
[ 0.126623] initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
[ 0.126625] calling pci_apply_final_quirks+0x0/0x125 @ 1
[ 0.126660] pci 0000:15:00.0: calling quirk_usb_early_handoff+0x0/0x6c3 @ 1
[ 0.126785] pci 0000:15:00.0: quirk_usb_early_handoff+0x0/0x6c3 took 119 usecs
[ 0.126802] pci 0000:38:00.0: calling pci_fixup_video+0x0/0x110 @ 1
[ 0.126810] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.126811] pci 0000:38:00.0: pci_fixup_video+0x0/0x110 took 7 usecs
[ 0.126815] pci 0000:38:00.1: calling quirk_gpu_hda+0x0/0xa0 @ 1
[ 0.126819] pci 0000:38:00.1: Linked as a consumer to 0000:38:00.0
[ 0.126823] pci 0000:38:00.1: quirk_gpu_hda+0x0/0xa0 took 5 usecs
[ 0.126829] pci 0000:38:00.3: calling quirk_usb_early_handoff+0x0/0x6c3 @ 1
[ 0.126989] pci 0000:38:00.3: quirk_usb_early_handoff+0x0/0x6c3 took 153 usecs
[ 0.126992] pci 0000:38:00.4: calling quirk_usb_early_handoff+0x0/0x6c3 @ 1
[ 0.127065] pci 0000:38:00.4: quirk_usb_early_handoff+0x0/0x6c3 took 69 usecs
[ 0.127069] pci 0000:38:00.6: calling quirk_gpu_hda+0x0/0xa0 @ 1
[ 0.127070] pci 0000:38:00.6: quirk_gpu_hda+0x0/0xa0 took 0 usecs
[ 0.127075] PCI: CLS 64 bytes, default 64
[ 0.127076] initcall pci_apply_final_quirks+0x0/0x125 returned 0 after 439 usecs
[ 0.127077] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 0.127079] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 usecs
[ 0.127081] calling populate_rootfs+0x0/0x10a @ 1
[ 0.127121] Unpacking initramfs...
[ 0.145680] Freeing initrd memory: 10648K
[ 0.145694] initcall populate_rootfs+0x0/0x10a returned 0 after 18173 usecs
[ 0.145696] calling pci_iommu_init+0x0/0x3f @ 1
[ 0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
[ 0.145799] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.145800] pci 0000:00:00.2: PCI INT A: not connected
[ 0.146241] iommu: Adding device 0000:00:01.0 to group 0
[ 0.146449] iommu: Adding device 0000:00:01.2 to group 1
[ 0.146646] iommu: Adding device 0000:00:08.0 to group 2
[ 0.146855] iommu: Adding device 0000:00:08.1 to group 3
[ 0.146881] iommu: Adding device 0000:00:08.2 to group 2
[ 0.147075] iommu: Adding device 0000:00:14.0 to group 4
[ 0.147096] iommu: Adding device 0000:00:14.3 to group 4
[ 0.147304] iommu: Adding device 0000:00:18.0 to group 5
[ 0.147325] iommu: Adding device 0000:00:18.1 to group 5
[ 0.147345] iommu: Adding device 0000:00:18.2 to group 5
[ 0.147366] iommu: Adding device 0000:00:18.3 to group 5
[ 0.147394] iommu: Adding device 0000:00:18.4 to group 5
[ 0.147414] iommu: Adding device 0000:00:18.5 to group 5
[ 0.147435] iommu: Adding device 0000:00:18.6 to group 5
[ 0.147455] iommu: Adding device 0000:00:18.7 to group 5
[ 0.147658] iommu: Adding device 0000:15:00.0 to group 6
[ 0.147692] iommu: Adding device 0000:15:00.1 to group 6
[ 0.147734] iommu: Adding device 0000:15:00.2 to group 6
[ 0.147775] iommu: Adding device 0000:16:00.0 to group 6
[ 0.147833] iommu: Adding device 0000:16:01.0 to group 6
[ 0.147855] iommu: Adding device 0000:16:04.0 to group 6
[ 0.147887] iommu: Adding device 0000:18:00.0 to group 6
[ 0.148157] iommu: Adding device 0000:38:00.0 to group 7
[ 0.148234] iommu: Using direct mapping for device 0000:38:00.0
[ 0.148332] iommu: Adding device 0000:38:00.1 to group 8
[ 0.148373] iommu: Adding device 0000:38:00.2 to group 8
[ 0.148412] iommu: Adding device 0000:38:00.3 to group 8
[ 0.148452] iommu: Adding device 0000:38:00.4 to group 8
[ 0.148491] iommu: Adding device 0000:38:00.6 to group 8
[ 0.148514] iommu: Adding device 0000:39:00.0 to group 2
[ 0.148759] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.148759] AMD-Vi: Extended features (0x4f77ef22294ada):
[ 0.148760] PPR NX GT IA GA PC GA_vAPIC
[ 0.148762] AMD-Vi: Interrupt remapping enabled
[ 0.148762] AMD-Vi: virtual APIC enabled
[ 0.186463] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.187307] initcall pci_iommu_init+0x0/0x3f returned 0 after 40631 usecs
[ 0.187309] calling calgary_fixup_tce_spaces+0x0/0xf1 @ 1
[ 0.187311] initcall calgary_fixup_tce_spaces+0x0/0xf1 returned -19 after 0 usecs
[ 0.187312] calling ir_dev_scope_init+0x0/0x33 @ 1
[ 0.187320] initcall ir_dev_scope_init+0x0/0x33 returned -19 after 5 usecs
[ 0.187346] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 0.187351] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 3 usecs
[ 0.187353] calling amd_uncore_init+0x0/0x275 @ 1
[ 0.187362] amd_uncore: AMD NB counters detected
[ 0.187365] amd_uncore: AMD LLC counters detected
[ 0.187471] initcall amd_uncore_init+0x0/0x275 returned 0 after 113 usecs
[ 0.187472] calling amd_ibs_init+0x0/0x18d @ 1
[ 0.187473] initcall amd_ibs_init+0x0/0x18d returned -19 after 0 usecs
[ 0.187475] calling amd_iommu_pc_init+0x0/0x270 @ 1
[ 0.187476] initcall amd_iommu_pc_init+0x0/0x270 returned -19 after 0 usecs
[ 0.187478] calling msr_init+0x0/0xf1 @ 1
[ 0.187481] initcall msr_init+0x0/0xf1 returned 0 after 1 usecs
[ 0.187482] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.187484] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 0.187485] calling i8259A_init_ops+0x0/0x21 @ 1
[ 0.187487] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 0.187488] calling init_tsc_clocksource+0x0/0xbe @ 1
[ 0.187491] initcall init_tsc_clocksource+0x0/0xbe returned 0 after 1 usecs
[ 0.187493] calling add_rtc_cmos+0x0/0xcd @ 1
[ 0.187495] initcall add_rtc_cmos+0x0/0xcd returned 0 after 1 usecs
[ 0.187496] calling i8237A_init_ops+0x0/0x37 @ 1
[ 0.187510] initcall i8237A_init_ops+0x0/0x37 returned 0 after 12 usecs
[ 0.187512] calling thermal_throttle_init_device+0x0/0x42 @ 1
[ 0.187514] initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 0 usecs
[ 0.187515] calling ioapic_init_ops+0x0/0x14 @ 1
[ 0.187517] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.187518] calling register_e820_pmem+0x0/0x42 @ 1
[ 0.187525] initcall register_e820_pmem+0x0/0x42 returned 0 after 5 usecs
[ 0.187526] calling add_pcspkr+0x0/0x6f @ 1
[ 0.187549] initcall add_pcspkr+0x0/0x6f returned 0 after 20 usecs
[ 0.187550] calling sysfb_init+0x0/0x9f @ 1
[ 0.187575] initcall sysfb_init+0x0/0x9f returned 0 after 22 usecs
[ 0.187576] calling audit_classes_init+0x0/0xaf @ 1
[ 0.187580] initcall audit_classes_init+0x0/0xaf returned 0 after 1 usecs
[ 0.187581] calling pt_dump_init+0x0/0x42 @ 1
[ 0.187583] initcall pt_dump_init+0x0/0x42 returned 0 after 0 usecs
[ 0.187585] calling init_aout_binfmt+0x0/0x16 @ 1
[ 0.187587] initcall init_aout_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.187589] calling iosf_mbi_init+0x0/0x1a @ 1
[ 0.187605] initcall iosf_mbi_init+0x0/0x1a returned 0 after 14 usecs
[ 0.187607] calling proc_execdomains_init+0x0/0x22 @ 1
[ 0.187610] initcall proc_execdomains_init+0x0/0x22 returned 0 after 2 usecs
[ 0.187612] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.187618] initcall register_warn_debugfs+0x0/0x24 returned 0 after 3 usecs
[ 0.187619] calling cpuhp_sysfs_init+0x0/0x6d @ 1
[ 0.187636] initcall cpuhp_sysfs_init+0x0/0x6d returned 0 after 15 usecs
[ 0.187637] calling ioresources_init+0x0/0x4a @ 1
[ 0.187640] initcall ioresources_init+0x0/0x4a returned 0 after 2 usecs
[ 0.187642] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.187645] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 1 usecs
[ 0.187646] calling snapshot_device_init+0x0/0x11 @ 1
[ 0.187667] initcall snapshot_device_init+0x0/0x11 returned 0 after 19 usecs
[ 0.187668] calling irq_gc_init_ops+0x0/0x14 @ 1
[ 0.187670] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.187671] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 0.187673] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.187674] calling klp_init+0x0/0x29 @ 1
[ 0.187677] initcall klp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.187678] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 0.187680] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.187682] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.187708] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 24 usecs
[ 0.187710] calling init_timer_list_procfs+0x0/0x32 @ 1
[ 0.187712] initcall init_timer_list_procfs+0x0/0x32 returned 0 after 0 usecs
[ 0.187714] calling alarmtimer_init+0x0/0x134 @ 1
[ 0.187748] initcall alarmtimer_init+0x0/0x134 returned 0 after 31 usecs
[ 0.187750] calling init_posix_timers+0x0/0x2a @ 1
[ 0.187792] initcall init_posix_timers+0x0/0x2a returned 0 after 39 usecs
[ 0.187794] calling clockevents_init_sysfs+0x0/0xc9 @ 1
[ 0.187989] initcall clockevents_init_sysfs+0x0/0xc9 returned 0 after 188 usecs
[ 0.187990] calling proc_dma_init+0x0/0x22 @ 1
[ 0.187993] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[ 0.187994] calling proc_modules_init+0x0/0x1f @ 1
[ 0.187997] initcall proc_modules_init+0x0/0x1f returned 0 after 0 usecs
[ 0.187998] calling kallsyms_init+0x0/0x22 @ 1
[ 0.188000] initcall kallsyms_init+0x0/0x22 returned 0 after 0 usecs
[ 0.188002] calling pid_namespaces_init+0x0/0x40 @ 1
[ 0.188038] initcall pid_namespaces_init+0x0/0x40 returned 0 after 33 usecs
[ 0.188040] calling audit_watch_init+0x0/0x3c @ 1
[ 0.188042] initcall audit_watch_init+0x0/0x3c returned 0 after 0 usecs
[ 0.188043] calling audit_fsnotify_init+0x0/0x3c @ 1
[ 0.188045] initcall audit_fsnotify_init+0x0/0x3c returned 0 after 0 usecs
[ 0.188046] calling audit_tree_init+0x0/0x4d @ 1
[ 0.188049] initcall audit_tree_init+0x0/0x4d returned 0 after 0 usecs
[ 0.188050] calling init_kprobes+0x0/0x1f9 @ 1
[ 0.188251] initcall init_kprobes+0x0/0x1f9 returned 0 after 194 usecs
[ 0.188253] calling seccomp_sysctl_init+0x0/0x2c @ 1
[ 0.188258] initcall seccomp_sysctl_init+0x0/0x2c returned 0 after 3 usecs
[ 0.188259] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 0.188266] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 4 usecs
[ 0.188268] calling init_tracepoints+0x0/0x28 @ 1
[ 0.188270] initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
[ 0.188271] calling stack_trace_init+0x0/0xb0 @ 1
[ 0.188278] initcall stack_trace_init+0x0/0xb0 returned 0 after 5 usecs
[ 0.188279] calling init_mmio_trace+0x0/0xc @ 1
[ 0.188282] initcall init_mmio_trace+0x0/0xc returned 0 after 1 usecs
[ 0.188283] calling init_blk_tracer+0x0/0x50 @ 1
[ 0.188289] initcall init_blk_tracer+0x0/0x50 returned 0 after 5 usecs
[ 0.188291] calling perf_event_sysfs_init+0x0/0x84 @ 1
[ 0.188418] initcall perf_event_sysfs_init+0x0/0x84 returned 0 after 122 usecs
[ 0.188419] calling init_uprobes+0x0/0x71 @ 1
[ 0.188422] initcall init_uprobes+0x0/0x71 returned 0 after 1 usecs
[ 0.188423] calling padata_driver_init+0x0/0x39 @ 1
[ 0.188425] initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 0.188427] calling system_trusted_keyring_init+0x0/0x61 @ 1
[ 0.188427] Initialise system trusted keyrings
[ 0.188445] initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 16 usecs
[ 0.188447] calling kswapd_init+0x0/0x85 @ 1
[ 0.188496] initcall kswapd_init+0x0/0x85 returned 0 after 46 usecs
[ 0.188497] calling extfrag_debug_init+0x0/0x78 @ 1
[ 0.188511] initcall extfrag_debug_init+0x0/0x78 returned 0 after 11 usecs
[ 0.188512] calling mm_compute_batch_init+0x0/0x19 @ 1
[ 0.188515] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[ 0.188516] calling slab_proc_init+0x0/0x22 @ 1
[ 0.188519] initcall slab_proc_init+0x0/0x22 returned 0 after 1 usecs
[ 0.188520] calling workingset_init+0x0/0x80 @ 1
[ 0.188522] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.188525] initcall workingset_init+0x0/0x80 returned 0 after 2 usecs
[ 0.188526] calling proc_vmalloc_init+0x0/0x30 @ 1
[ 0.188528] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 0 usecs
[ 0.188530] calling procswaps_init+0x0/0x1f @ 1
[ 0.188533] initcall procswaps_init+0x0/0x1f returned 0 after 0 usecs
[ 0.188534] calling init_frontswap+0x0/0x91 @ 1
[ 0.188541] initcall init_frontswap+0x0/0x91 returned 0 after 4 usecs
[ 0.188542] calling slab_sysfs_init+0x0/0xfa @ 1
[ 0.190279] initcall slab_sysfs_init+0x0/0xfa returned 0 after 1694 usecs
[ 0.190280] calling init_zbud+0x0/0x20 @ 1
[ 0.190281] zbud: loaded
[ 0.190283] initcall init_zbud+0x0/0x20 returned 0 after 1 usecs
[ 0.190284] calling fcntl_init+0x0/0x2a @ 1
[ 0.190287] initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
[ 0.190288] calling proc_filesystems_init+0x0/0x22 @ 1
[ 0.190290] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
[ 0.190292] calling start_dirtytime_writeback+0x0/0x2a @ 1
[ 0.190294] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
[ 0.190295] calling blkdev_init+0x0/0x20 @ 1
[ 0.190307] initcall blkdev_init+0x0/0x20 returned 0 after 10 usecs
[ 0.190308] calling dio_init+0x0/0x2d @ 1
[ 0.190311] initcall dio_init+0x0/0x2d returned 0 after 1 usecs
[ 0.190312] calling dnotify_init+0x0/0x79 @ 1
[ 0.190382] initcall dnotify_init+0x0/0x79 returned 0 after 66 usecs
[ 0.190383] calling fanotify_user_setup+0x0/0x77 @ 1
[ 0.190388] initcall fanotify_user_setup+0x0/0x77 returned 0 after 3 usecs
[ 0.190390] calling userfaultfd_init+0x0/0x2e @ 1
[ 0.190437] initcall userfaultfd_init+0x0/0x2e returned 0 after 44 usecs
[ 0.190438] calling aio_setup+0x0/0x7b @ 1
[ 0.190450] initcall aio_setup+0x0/0x7b returned 0 after 9 usecs
[ 0.190452] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 0.190598] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 141 usecs
[ 0.190600] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.190607] initcall init_devpts_fs+0x0/0x28 returned 0 after 5 usecs
[ 0.190609] calling init_pstore_fs+0x0/0x4d @ 1
[ 0.190609] pstore: using deflate compression
[ 0.190612] initcall init_pstore_fs+0x0/0x4d returned 0 after 1 usecs
[ 0.190613] calling ipc_init+0x0/0x5a @ 1
[ 0.190632] initcall ipc_init+0x0/0x5a returned 0 after 17 usecs
[ 0.190634] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 0.190642] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 6 usecs
[ 0.190644] calling init_mqueue_fs+0x0/0xf1 @ 1
[ 0.190715] initcall init_mqueue_fs+0x0/0xf1 returned 0 after 67 usecs
[ 0.190716] calling key_proc_init+0x0/0x64 @ 1
[ 0.190719] initcall key_proc_init+0x0/0x64 returned 0 after 1 usecs
[ 0.190721] calling selinux_nf_ip_init+0x0/0x3b @ 1
[ 0.190723] initcall selinux_nf_ip_init+0x0/0x3b returned 0 after 0 usecs
[ 0.190724] calling init_sel_fs+0x0/0x120 @ 1
[ 0.190726] initcall init_sel_fs+0x0/0x120 returned 0 after 0 usecs
[ 0.190727] calling selnl_init+0x0/0x7d @ 1
[ 0.190740] initcall selnl_init+0x0/0x7d returned 0 after 10 usecs
[ 0.190741] calling sel_netif_init+0x0/0x3b @ 1
[ 0.190743] initcall sel_netif_init+0x0/0x3b returned 0 after 0 usecs
[ 0.190745] calling sel_netnode_init+0x0/0x36 @ 1
[ 0.190746] initcall sel_netnode_init+0x0/0x36 returned 0 after 0 usecs
[ 0.190748] calling sel_netport_init+0x0/0x36 @ 1
[ 0.190749] initcall sel_netport_init+0x0/0x36 returned 0 after 0 usecs
[ 0.190751] calling aurule_init+0x0/0x2b @ 1
[ 0.190753] initcall aurule_init+0x0/0x2b returned 0 after 0 usecs
[ 0.190754] calling crypto_algapi_init+0x0/0xd @ 1
[ 0.190757] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[ 0.190760] calling rsa_init+0x0/0x50 @ 1
[ 0.190818] alg: self-tests disabled
[ 0.190824] initcall rsa_init+0x0/0x50 returned 0 after 61 usecs
[ 0.190826] calling hmac_module_init+0x0/0x11 @ 1
[ 0.190827] initcall hmac_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.190829] calling crypto_null_mod_init+0x0/0x48 @ 1
[ 0.190957] initcall crypto_null_mod_init+0x0/0x48 returned 0 after 123 usecs
[ 0.190959] calling md5_mod_init+0x0/0x11 @ 1
[ 0.190997] initcall md5_mod_init+0x0/0x11 returned 0 after 35 usecs
[ 0.190998] calling sha1_generic_mod_init+0x0/0x11 @ 1
[ 0.191029] initcall sha1_generic_mod_init+0x0/0x11 returned 0 after 28 usecs
[ 0.191030] calling sha256_generic_mod_init+0x0/0x16 @ 1
[ 0.191090] initcall sha256_generic_mod_init+0x0/0x16 returned 0 after 58 usecs
[ 0.191091] calling aes_init+0x0/0x11 @ 1
[ 0.191122] initcall aes_init+0x0/0x11 returned 0 after 28 usecs
[ 0.191123] calling deflate_mod_init+0x0/0x3f @ 1
[ 0.191216] initcall deflate_mod_init+0x0/0x3f returned 0 after 89 usecs
[ 0.191217] calling crct10dif_mod_init+0x0/0x11 @ 1
[ 0.191255] initcall crct10dif_mod_init+0x0/0x11 returned 0 after 36 usecs
[ 0.191256] calling lzo_mod_init+0x0/0x3a @ 1
[ 0.191336] initcall lzo_mod_init+0x0/0x3a returned 0 after 76 usecs
[ 0.191337] calling asymmetric_key_init+0x0/0x11 @ 1
[ 0.191338] Key type asymmetric registered
[ 0.191339] initcall asymmetric_key_init+0x0/0x11 returned 0 after 1 usecs
[ 0.191340] calling x509_key_init+0x0/0x11 @ 1
[ 0.191341] Asymmetric key parser 'x509' registered
[ 0.191342] initcall x509_key_init+0x0/0x11 returned 0 after 0 usecs
[ 0.191343] calling proc_genhd_init+0x0/0x42 @ 1
[ 0.191345] initcall proc_genhd_init+0x0/0x42 returned 0 after 1 usecs
[ 0.191345] calling bsg_init+0x0/0x196 @ 1
[ 0.191399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.191400] initcall bsg_init+0x0/0x196 returned 0 after 52 usecs
[ 0.191401] calling throtl_init+0x0/0x41 @ 1
[ 0.191441] initcall throtl_init+0x0/0x41 returned 0 after 38 usecs
[ 0.191442] calling noop_init+0x0/0x11 @ 1
[ 0.191443] io scheduler noop registered
[ 0.191444] initcall noop_init+0x0/0x11 returned 0 after 1 usecs
[ 0.191445] calling deadline_init+0x0/0x11 @ 1
[ 0.191445] io scheduler deadline registered
[ 0.191446] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.191447] calling cfq_init+0x0/0x74 @ 1
[ 0.191536] io scheduler cfq registered (default)
[ 0.191537] initcall cfq_init+0x0/0x74 returned 0 after 87 usecs
[ 0.191538] calling deadline_init+0x0/0x11 @ 1
[ 0.191538] io scheduler mq-deadline registered
[ 0.191539] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.191540] calling btree_module_init+0x0/0x25 @ 1
[ 0.191542] initcall btree_module_init+0x0/0x25 returned 0 after 1 usecs
[ 0.191543] calling crc_t10dif_mod_init+0x0/0x39 @ 1
[ 0.191544] initcall crc_t10dif_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 0.191545] calling percpu_counter_startup+0x0/0x51 @ 1
[ 0.191581] initcall percpu_counter_startup+0x0/0x51 returned 0 after 33 usecs
[ 0.191581] calling digsig_init+0x0/0x36 @ 1
[ 0.191583] initcall digsig_init+0x0/0x36 returned 0 after 0 usecs
[ 0.191583] calling sg_pool_init+0x0/0xc6 @ 1
[ 0.191614] initcall sg_pool_init+0x0/0xc6 returned 0 after 28 usecs
[ 0.191614] calling phy_core_init+0x0/0x4a @ 1
[ 0.191617] initcall phy_core_init+0x0/0x4a returned 0 after 1 usecs
[ 0.191618] calling pci_proc_init+0x0/0x6c @ 1
[ 0.191648] initcall pci_proc_init+0x0/0x6c returned 0 after 28 usecs
[ 0.191648] calling pcie_portdrv_init+0x0/0x35 @ 1
[ 0.192623] initcall pcie_portdrv_init+0x0/0x35 returned 0 after 949 usecs
[ 0.192624] calling aer_service_init+0x0/0x32 @ 1
[ 0.192672] pcieport 0000:00:01.2: AER enabled with IRQ 26
[ 0.192676] initcall aer_service_init+0x0/0x32 returned 0 after 49 usecs
[ 0.192677] calling pcie_pme_service_init+0x0/0x11 @ 1
[ 0.192685] pcieport 0000:00:01.2: Signaling PME with IRQ 26
[ 0.192708] pcieport 0000:00:08.1: Signaling PME with IRQ 27
[ 0.192729] pcieport 0000:00:08.2: Signaling PME with IRQ 28
[ 0.192735] initcall pcie_pme_service_init+0x0/0x11 returned 0 after 55 usecs
[ 0.192736] calling dpc_service_init+0x0/0x11 @ 1
[ 0.192746] initcall dpc_service_init+0x0/0x11 returned 0 after 9 usecs
[ 0.192747] calling pci_hotplug_init+0x0/0x31 @ 1
[ 0.192748] initcall pci_hotplug_init+0x0/0x31 returned 0 after 0 usecs
[ 0.192749] calling pcied_init+0x0/0x56 @ 1
[ 0.192752] initcall pcied_init+0x0/0x56 returned 0 after 2 usecs
[ 0.192753] calling xenfb_init+0x0/0x3b @ 1
[ 0.192754] initcall xenfb_init+0x0/0x3b returned -19 after 0 usecs
[ 0.192755] calling vesafb_driver_init+0x0/0x13 @ 1
[ 0.192760] initcall vesafb_driver_init+0x0/0x13 returned 0 after 4 usecs
[ 0.192761] calling efifb_driver_init+0x0/0x13 @ 1
[ 0.192765] efifb: probing for efifb
[ 0.192773] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.192774] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.192774] efifb: scrolling: redraw
[ 0.192775] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.194117] Console: switching to colour frame buffer device 128x48
[ 0.195376] fb0: EFI VGA frame buffer device
[ 0.195381] initcall efifb_driver_init+0x0/0x13 returned 0 after 2557 usecs
[ 0.195382] calling intel_idle_init+0x0/0x5d5 @ 1
[ 0.195383] initcall intel_idle_init+0x0/0x5d5 returned -19 after 0 usecs
[ 0.195385] calling acpi_processor_driver_init+0x0/0x91 @ 1
[ 0.195416] Monitor-Mwait will be used to enter C-1 state
[ 0.195773] initcall acpi_processor_driver_init+0x0/0x91 returned 0 after 377 usecs
[ 0.195774] calling acpi_hed_driver_init+0x0/0x11 @ 1
[ 0.195809] initcall acpi_hed_driver_init+0x0/0x11 returned 0 after 33 usecs
[ 0.195810] calling bgrt_init+0x0/0xb5 @ 1
[ 0.195814] initcall bgrt_init+0x0/0xb5 returned 0 after 2 usecs
[ 0.195815] calling erst_init+0x0/0x2f9 @ 1
[ 0.195816] initcall erst_init+0x0/0x2f9 returned 0 after 0 usecs
[ 0.195817] calling ghes_init+0x0/0x137 @ 1
[ 0.195819] initcall ghes_init+0x0/0x137 returned -19 after 0 usecs
[ 0.195820] calling extlog_init+0x0/0x36a @ 1
[ 0.195821] initcall extlog_init+0x0/0x36a returned -19 after 0 usecs
[ 0.195822] calling gpio_clk_driver_init+0x0/0x13 @ 1
[ 0.195826] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 3 usecs
[ 0.195827] calling plt_clk_driver_init+0x0/0x13 @ 1
[ 0.195831] initcall plt_clk_driver_init+0x0/0x13 returned 0 after 2 usecs
[ 0.195832] calling st_clk_driver_init+0x0/0x13 @ 1
[ 0.195843] initcall st_clk_driver_init+0x0/0x13 returned 0 after 9 usecs
[ 0.195844] calling xenbus_probe_initcall+0x0/0x42 @ 1
[ 0.195845] initcall xenbus_probe_initcall+0x0/0x42 returned -19 after 0 usecs
[ 0.195846] calling xenbus_init+0x0/0x36 @ 1
[ 0.195847] initcall xenbus_init+0x0/0x36 returned -19 after 0 usecs
[ 0.195848] calling xenbus_backend_init+0x0/0x3f @ 1
[ 0.195850] initcall xenbus_backend_init+0x0/0x3f returned -19 after 0 usecs
[ 0.195851] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 0.195852] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
[ 0.195853] calling hyper_sysfs_init+0x0/0x177 @ 1
[ 0.195854] initcall hyper_sysfs_init+0x0/0x177 returned -19 after 0 usecs
[ 0.195855] calling platform_driver_init+0x0/0x1a @ 1
[ 0.195862] initcall platform_driver_init+0x0/0x1a returned 0 after 4 usecs
[ 0.195862] calling xen_late_init_mcelog+0x0/0x58 @ 1
[ 0.195863] initcall xen_late_init_mcelog+0x0/0x58 returned -19 after 0 usecs
[ 0.195864] calling n_null_init+0x0/0x1f @ 1
[ 0.195865] initcall n_null_init+0x0/0x1f returned 0 after 0 usecs
[ 0.195866] calling pty_init+0x0/0x1eb @ 1
[ 0.195897] initcall pty_init+0x0/0x1eb returned 0 after 30 usecs
[ 0.195898] calling sysrq_init+0x0/0x6c @ 1
[ 0.195900] initcall sysrq_init+0x0/0x6c returned 0 after 1 usecs
[ 0.195901] calling xen_hvc_init+0x0/0x258 @ 1
[ 0.195902] initcall xen_hvc_init+0x0/0x258 returned -19 after 0 usecs
[ 0.195903] calling serial8250_init+0x0/0x15b @ 1
[ 0.195904] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.216796] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.217184] initcall serial8250_init+0x0/0x15b returned 0 after 20780 usecs
[ 0.217185] calling serial_pci_driver_init+0x0/0x1a @ 1
[ 0.217213] initcall serial_pci_driver_init+0x0/0x1a returned 0 after 27 usecs
[ 0.217214] calling exar_pci_driver_init+0x0/0x1a @ 1
[ 0.217220] initcall exar_pci_driver_init+0x0/0x1a returned 0 after 5 usecs
[ 0.217221] calling dw8250_platform_driver_init+0x0/0x13 @ 1
[ 0.217227] initcall dw8250_platform_driver_init+0x0/0x13 returned 0 after 4 usecs
[ 0.217228] calling mid8250_pci_driver_init+0x0/0x1a @ 1
[ 0.217233] initcall mid8250_pci_driver_init+0x0/0x1a returned 0 after 3 usecs
[ 0.217234] calling hpet_init+0x0/0x65 @ 1
[ 0.217324] initcall hpet_init+0x0/0x65 returned 0 after 86 usecs
[ 0.217325] calling agp_init+0x0/0x24 @ 1
[ 0.217325] Linux agpgart interface v0.103
[ 0.217326] initcall agp_init+0x0/0x24 returned 0 after 0 usecs
[ 0.217327] calling agp_amd64_mod_init+0x0/0x20 @ 1
[ 0.217620] initcall agp_amd64_mod_init+0x0/0x20 returned -19 after 284 usecs
[ 0.217620] calling agp_intel_init+0x0/0x29 @ 1
[ 0.217628] initcall agp_intel_init+0x0/0x29 returned 0 after 6 usecs
[ 0.217629] calling agp_sis_init+0x0/0x29 @ 1
[ 0.217634] initcall agp_sis_init+0x0/0x29 returned 0 after 4 usecs
[ 0.217635] calling agp_via_init+0x0/0x29 @ 1
[ 0.217641] initcall agp_via_init+0x0/0x29 returned 0 after 5 usecs
[ 0.217642] calling amd_iommu_v2_init+0x0/0x6e @ 1
[ 0.217642] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.217684] initcall amd_iommu_v2_init+0x0/0x6e returned 0 after 40 usecs
[ 0.217685] calling cn_proc_init+0x0/0x36 @ 1
[ 0.217687] initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
[ 0.217689] calling topology_sysfs_init+0x0/0x30 @ 1
[ 0.217706] initcall topology_sysfs_init+0x0/0x30 returned 0 after 16 usecs
[ 0.217707] calling cacheinfo_sysfs_init+0x0/0x2c @ 1
[ 0.218306] initcall cacheinfo_sysfs_init+0x0/0x2c returned 168 after 583 usecs
[ 0.218307] calling devcoredump_init+0x0/0x18 @ 1
[ 0.218311] initcall devcoredump_init+0x0/0x18 returned 0 after 2 usecs
[ 0.218312] calling cht_wc_driver_init+0x0/0x13 @ 1
[ 0.218316] initcall cht_wc_driver_init+0x0/0x13 returned 0 after 3 usecs
[ 0.218317] calling mac_hid_init+0x0/0x22 @ 1
[ 0.218321] initcall mac_hid_init+0x0/0x22 returned 0 after 2 usecs
[ 0.218322] calling net_olddevs_init+0x0/0x5d @ 1
[ 0.218325] initcall net_olddevs_init+0x0/0x5d returned 0 after 2 usecs
[ 0.218326] calling cavium_ptp_driver_init+0x0/0x1a @ 1
[ 0.218331] initcall cavium_ptp_driver_init+0x0/0x1a returned 0 after 4 usecs
[ 0.218332] calling ledtrig_usb_init+0x0/0x2e @ 1
[ 0.218334] initcall ledtrig_usb_init+0x0/0x2e returned 0 after 1 usecs
[ 0.218335] calling i8042_init+0x0/0x46b @ 1
[ 0.218345] i8042: PNP: No PS/2 controller found.
[ 0.218346] initcall i8042_init+0x0/0x46b returned -19 after 9 usecs
[ 0.218347] calling input_leds_init+0x0/0x11 @ 1
[ 0.218348] initcall input_leds_init+0x0/0x11 returned 0 after 0 usecs
[ 0.218349] calling mousedev_init+0x0/0x81 @ 1
[ 0.218410] mousedev: PS/2 mouse device common for all mice
[ 0.218411] initcall mousedev_init+0x0/0x81 returned 0 after 59 usecs
[ 0.218412] calling atkbd_init+0x0/0x26 @ 1
[ 0.218419] initcall atkbd_init+0x0/0x26 returned 0 after 5 usecs
[ 0.218420] calling xenkbd_init+0x0/0x3b @ 1
[ 0.218421] initcall xenkbd_init+0x0/0x3b returned -19 after 0 usecs
[ 0.218422] calling cmos_init+0x0/0x6a @ 1
[ 0.218464] rtc_cmos 00:02: RTC can wake from S4
[ 0.218656] rtc_cmos 00:02: registered as rtc0
[ 0.218664] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.218668] initcall cmos_init+0x0/0x6a returned 0 after 239 usecs
[ 0.218669] calling ptp_kvm_init+0x0/0xf1 @ 1
[ 0.218671] initcall ptp_kvm_init+0x0/0xf1 returned -19 after 0 usecs
[ 0.218672] calling intel_pstate_init+0x0/0x351 @ 1
[ 0.218674] initcall intel_pstate_init+0x0/0x351 returned -19 after 0 usecs
[ 0.218675] calling ledtrig_disk_init+0x0/0x54 @ 1
[ 0.218685] initcall ledtrig_disk_init+0x0/0x54 returned 0 after 8 usecs
[ 0.218686] calling ledtrig_mtd_init+0x0/0x2e @ 1
[ 0.218687] initcall ledtrig_mtd_init+0x0/0x2e returned 0 after 0 usecs
[ 0.218688] calling ledtrig_cpu_init+0x0/0xd3 @ 1
[ 0.218743] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.218744] initcall ledtrig_cpu_init+0x0/0xd3 returned 0 after 53 usecs
[ 0.218745] calling ledtrig_panic_init+0x0/0x39 @ 1
[ 0.218747] initcall ledtrig_panic_init+0x0/0x39 returned 0 after 0 usecs
[ 0.218748] calling dmi_sysfs_init+0x0/0xdc @ 1
[ 0.218983] initcall dmi_sysfs_init+0x0/0xdc returned 0 after 227 usecs
[ 0.218983] calling efi_load_efivars+0x0/0x71 @ 1
[ 0.219000] initcall efi_load_efivars+0x0/0x71 returned 0 after 15 usecs
[ 0.219001] calling esrt_sysfs_init+0x0/0x2fa @ 1
[ 0.219007] initcall esrt_sysfs_init+0x0/0x2fa returned 0 after 4 usecs
[ 0.219008] calling pmc_atom_init+0x0/0x283 @ 1
[ 0.219012] initcall pmc_atom_init+0x0/0x283 returned -19 after 3 usecs
[ 0.219013] calling powercap_init+0x0/0x2a1 @ 1
[ 0.219044] initcall powercap_init+0x0/0x2a1 returned 0 after 30 usecs
[ 0.219046] calling pm_check_save_msr+0x0/0x20 @ 1
[ 0.219047] initcall pm_check_save_msr+0x0/0x20 returned 0 after 0 usecs
[ 0.219048] calling sock_diag_init+0x0/0x34 @ 1
[ 0.219059] initcall sock_diag_init+0x0/0x34 returned 0 after 9 usecs
[ 0.219061] calling blackhole_init+0x0/0x11 @ 1
[ 0.219063] initcall blackhole_init+0x0/0x11 returned 0 after 0 usecs
[ 0.219064] calling gre_offload_init+0x0/0x49 @ 1
[ 0.219065] initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs
[ 0.219066] calling sysctl_ipv4_init+0x0/0x4c @ 1
[ 0.219097] initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 28 usecs
[ 0.219098] calling cubictcp_register+0x0/0x58 @ 1
[ 0.219099] initcall cubictcp_register+0x0/0x58 returned 0 after 0 usecs
[ 0.219100] calling inet6_init+0x0/0x34b @ 1
[ 0.219371] NET: Registered protocol family 10
[ 0.222868] Segment Routing with IPv6
[ 0.222880] initcall inet6_init+0x0/0x34b returned 0 after 3689 usecs
[ 0.222881] calling mip6_init+0x0/0xb9 @ 1
[ 0.222882] mip6: Mobile IPv6
[ 0.222883] initcall mip6_init+0x0/0xb9 returned 0 after 0 usecs
[ 0.222884] calling packet_init+0x0/0x42 @ 1
[ 0.222885] NET: Registered protocol family 17
[ 0.222887] initcall packet_init+0x0/0x42 returned 0 after 1 usecs
[ 0.222888] calling dcbnl_init+0x0/0x4d @ 1
[ 0.222890] initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
[ 0.222891] calling mpls_gso_init+0x0/0x2c @ 1
[ 0.222892] mpls_gso: MPLS GSO support
[ 0.222893] initcall mpls_gso_init+0x0/0x2c returned 0 after 0 usecs
[ 0.222895] calling mcheck_init_device+0x0/0x12f @ 1
[ 0.223112] initcall mcheck_init_device+0x0/0x12f returned 0 after 210 usecs
[ 0.223130] calling mcheck_late_init+0x0/0x70 @ 1
[ 0.223135] initcall mcheck_late_init+0x0/0x70 returned 0 after 3 usecs
[ 0.223136] calling severities_debugfs_init+0x0/0x3b @ 1
[ 0.223138] initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
[ 0.223139] calling threshold_init_device+0x0/0x4b @ 1
[ 0.223408] initcall threshold_init_device+0x0/0x4b returned 0 after 261 usecs
[ 0.223409] calling microcode_init+0x0/0x1fb @ 1
[ 0.223425] microcode: CPU0: patch_level=0x0810100b
[ 0.223427] microcode: CPU1: patch_level=0x0810100b
[ 0.223438] microcode: CPU2: patch_level=0x0810100b
[ 0.223444] microcode: CPU3: patch_level=0x0810100b
[ 0.223493] microcode: Microcode Update Driver: v2.2.
[ 0.223495] initcall microcode_init+0x0/0x1fb returned 0 after 82 usecs
[ 0.223496] calling hpet_insert_resource+0x0/0x23 @ 1
[ 0.223498] initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
[ 0.223499] calling update_mp_table+0x0/0x507 @ 1
[ 0.223500] initcall update_mp_table+0x0/0x507 returned 0 after 0 usecs
[ 0.223501] calling lapic_insert_resource+0x0/0x3f @ 1
[ 0.223502] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[ 0.223503] calling print_ICs+0x0/0x18b @ 1
[ 0.223504] initcall print_ICs+0x0/0x18b returned 0 after 0 usecs
[ 0.223506] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 0.223508] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 1 usecs
[ 0.223509] calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
[ 0.223511] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
[ 0.223512] calling create_init_pkru_value+0x0/0x29 @ 1
[ 0.223514] initcall create_init_pkru_value+0x0/0x29 returned 0 after 0 usecs
[ 0.223517] calling init_oops_id+0x0/0x40 @ 1
[ 0.223532] initcall init_oops_id+0x0/0x40 returned 0 after 13 usecs
[ 0.223533] calling sched_clock_init_late+0x0/0x7b @ 1
[ 0.223534] sched_clock: Marking stable (223490985, 0)->(319742372, -96251387)
[ 0.223609] initcall sched_clock_init_late+0x0/0x7b returned 0 after 73 usecs
[ 0.223610] calling sched_init_debug+0x0/0x3e @ 1
[ 0.223613] initcall sched_init_debug+0x0/0x3e returned 0 after 1 usecs
[ 0.223614] calling pm_qos_power_init+0x0/0xaf @ 1
[ 0.223672] initcall pm_qos_power_init+0x0/0xaf returned 0 after 56 usecs
[ 0.223673] calling pm_debugfs_init+0x0/0x24 @ 1
[ 0.223675] initcall pm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.223675] calling printk_late_init+0x0/0x122 @ 1
[ 0.223677] initcall printk_late_init+0x0/0x122 returned 0 after 0 usecs
[ 0.223678] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 0.223680] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 0 usecs
[ 0.223681] calling debugfs_kprobe_init+0x0/0xd2 @ 1
[ 0.223685] initcall debugfs_kprobe_init+0x0/0xd2 returned 0 after 2 usecs
[ 0.223686] calling taskstats_init+0x0/0x37 @ 1
[ 0.223689] registered taskstats version 1
[ 0.223690] initcall taskstats_init+0x0/0x37 returned 0 after 2 usecs
[ 0.223692] calling load_system_certificate_list+0x0/0xea @ 1
[ 0.223692] Loading compiled-in X.509 certificates
[ 0.223693] initcall load_system_certificate_list+0x0/0xea returned 0 after 0 usecs
[ 0.223694] calling fault_around_debugfs+0x0/0x35 @ 1
[ 0.223696] initcall fault_around_debugfs+0x0/0x35 returned 0 after 0 usecs
[ 0.223698] calling max_swapfiles_check+0x0/0x8 @ 1
[ 0.223699] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 0.223700] calling init_zswap+0x0/0x43a @ 1
[ 0.223708] zswap: loaded using pool lzo/zbud
[ 0.223763] initcall init_zswap+0x0/0x43a returned 0 after 59 usecs
[ 0.223764] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 0.223765] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
[ 0.223766] calling check_early_ioremap_leak+0x0/0x39 @ 1
[ 0.223767] initcall check_early_ioremap_leak+0x0/0x39 returned 0 after 0 usecs
[ 0.223769] calling init_root_keyring+0x0/0xa @ 1
[ 0.223868] initcall init_root_keyring+0x0/0xa returned 0 after 95 usecs
[ 0.223869] calling init_profile_hash+0x0/0x7f @ 1
[ 0.223870] initcall init_profile_hash+0x0/0x7f returned 0 after 0 usecs
[ 0.223871] calling integrity_fs_init+0x0/0x3f @ 1
[ 0.223874] initcall integrity_fs_init+0x0/0x3f returned 0 after 1 usecs
[ 0.223875] calling prandom_reseed+0x0/0x2a @ 1
[ 0.224092] initcall prandom_reseed+0x0/0x2a returned 0 after 210 usecs
[ 0.224092] calling init_error_injection+0x0/0x6a @ 1
[ 0.224322] initcall init_error_injection+0x0/0x6a returned 0 after 223 usecs
[ 0.224323] calling pci_resource_alignment_sysfs_init+0x0/0x21 @ 1
[ 0.224325] initcall pci_resource_alignment_sysfs_init+0x0/0x21 returned 0 after 1 usecs
[ 0.224326] calling pci_sysfs_init+0x0/0x50 @ 1
[ 0.224433] initcall pci_sysfs_init+0x0/0x50 returned 0 after 103 usecs
[ 0.224434] calling bert_init+0x0/0x22b @ 1
[ 0.224436] initcall bert_init+0x0/0x22b returned 0 after 0 usecs
[ 0.224437] calling clk_debug_init+0x0/0x116 @ 1
[ 0.224442] initcall clk_debug_init+0x0/0x116 returned 0 after 3 usecs
[ 0.224443] calling boot_wait_for_devices+0x0/0x29 @ 1
[ 0.224444] initcall boot_wait_for_devices+0x0/0x29 returned -19 after 0 usecs
[ 0.224446] calling dmar_free_unused_resources+0x0/0xc5 @ 1
[ 0.224447] initcall dmar_free_unused_resources+0x0/0xc5 returned 0 after 0 usecs
[ 0.224448] calling deferred_probe_initcall+0x0/0x30 @ 1
[ 0.224452] initcall deferred_probe_initcall+0x0/0x30 returned 0 after 3 usecs
[ 0.224454] calling genpd_debug_init+0x0/0x184 @ 1
[ 0.224456] initcall genpd_debug_init+0x0/0x184 returned 0 after 1 usecs
[ 0.224457] calling genpd_power_off_unused+0x0/0x7e @ 1
[ 0.224458] initcall genpd_power_off_unused+0x0/0x7e returned 0 after 0 usecs
[ 0.224459] calling rtc_hctosys+0x0/0x102 @ 1
[ 0.224502] rtc_cmos 00:02: setting system clock to 2018-07-17 14:50:58 UTC (1531839058)
[ 0.224503] initcall rtc_hctosys+0x0/0x102 returned 0 after 41 usecs
[ 0.224504] calling firmware_memmap_init+0x0/0x33 @ 1
[ 0.224562] initcall firmware_memmap_init+0x0/0x33 returned 0 after 54 usecs
[ 0.224564] calling register_update_efi_random_seed+0x0/0x20 @ 1
[ 0.224565] initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs
[ 0.224565] calling efi_shutdown_init+0x0/0x3c @ 1
[ 0.224567] initcall efi_shutdown_init+0x0/0x3c returned 0 after 0 usecs
[ 0.224568] calling pci_mmcfg_late_insert_resources+0x0/0x51 @ 1
[ 0.224569] initcall pci_mmcfg_late_insert_resources+0x0/0x51 returned 0 after 0 usecs
[ 0.224570] calling tcp_congestion_default+0x0/0x18 @ 1
[ 0.224572] initcall tcp_congestion_default+0x0/0x18 returned 0 after 0 usecs
[ 0.224573] calling software_resume+0x0/0x210 @ 1
[ 0.224575] initcall software_resume+0x0/0x210 returned -2 after 0 usecs
[ 0.224575] calling tracing_set_default_clock+0x0/0x35 @ 1
[ 0.224576] initcall tracing_set_default_clock+0x0/0x35 returned 0 after 0 usecs
[ 0.224577] calling clear_boot_tracer+0x0/0x26 @ 1
[ 0.224578] initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs
[ 0.224580] calling clk_disable_unused+0x0/0x160 @ 1
[ 0.224582] initcall clk_disable_unused+0x0/0x160 returned 0 after 0 usecs
[ 0.224582] calling regulator_init_complete+0x0/0x4d @ 1
[ 0.224584] initcall regulator_init_complete+0x0/0x4d returned 0 after 1 usecs
[ 0.445380] Freeing unused kernel memory: 1544K
[ 0.458115] Write protecting the kernel read-only data: 16384k
[ 0.460158] Freeing unused kernel memory: 2028K
[ 0.461809] Freeing unused kernel memory: 864K
[ 0.468536] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.512269] calling pt_gpio_driver_init+0x0/0x1000 [gpio_amdpt] @ 116
[ 0.512491] initcall pt_gpio_driver_init+0x0/0x1000 [gpio_amdpt] returned 0 after 212 usecs
[ 0.520004] calling usb_init+0x0/0x141 [usbcore] @ 113
[ 0.520011] ACPI: bus type USB registered
[ 0.520025] usbcore: registered new interface driver usbfs
[ 0.520037] usbcore: registered new interface driver hub
[ 0.520067] usbcore: registered new device driver usb
[ 0.520074] initcall usb_init+0x0/0x141 [usbcore] returned 0 after 60 usecs
[ 0.521177] calling init_scsi+0x0/0x7a [scsi_mod] @ 123
[ 0.521242] SCSI subsystem initialized
[ 0.521248] initcall init_scsi+0x0/0x7a [scsi_mod] returned 0 after 63 usecs
[ 0.522364] calling xhci_hcd_init+0x0/0x1f [xhci_hcd] @ 113
[ 0.522371] initcall xhci_hcd_init+0x0/0x1f [xhci_hcd] returned 0 after 1 usecs
[ 0.523631] calling cryptd_init+0x0/0x1000 [cryptd] @ 124
[ 0.523636] cryptd: max_cpu_qlen set to 1000
[ 0.523638] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 5 usecs
[ 0.523672] calling xhci_pci_init+0x0/0x1000 [xhci_pci] @ 113
[ 0.523712] calling ata_init+0x0/0x316 [libata] @ 123
[ 0.523882] calling aes_init+0x0/0x1000 [aes_x86_64] @ 124
[ 0.523942] xhci_hcd 0000:15:00.0: xHCI Host Controller
[ 0.523948] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
[ 0.526295] libata version 3.00 loaded.
[ 0.526305] initcall ata_init+0x0/0x316 [libata] returned 0 after 2356 usecs
[ 0.527171] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 115
[ 0.527194] ahci 0000:15:00.1: version 3.0
[ 0.527321] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
[ 0.527371] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.527372] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.528123] scsi host0: ahci
[ 0.528485] scsi host1: ahci
[ 0.528780] scsi host2: ahci
[ 0.531059] scsi host3: ahci
[ 0.532847] scsi host4: ahci
[ 0.532983] scsi host5: ahci
[ 0.533103] scsi host6: ahci
[ 0.533245] scsi host7: ahci
[ 0.533308] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 36
[ 0.533310] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 36
[ 0.533311] ata3: DUMMY
[ 0.533312] ata4: DUMMY
[ 0.533314] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 36
[ 0.533315] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 36
[ 0.533316] ata7: DUMMY
[ 0.533316] ata8: DUMMY
[ 0.533538] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.533540] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
[ 0.533716] scsi host8: ahci
[ 0.533785] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 38
[ 0.533804] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 6472 usecs
[ 0.558256] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 30352 usecs
[ 0.558866] calling aesni_init+0x0/0x1e7 [aesni_intel] @ 119
[ 0.558867] AVX2 version of gcm_enc/dec engaged.
[ 0.558867] AES CTR mode by8 optimization enabled
[ 0.563581] initcall aesni_init+0x0/0x1e7 [aesni_intel] returned 0 after 4594 usecs
[ 0.563843] calling crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 127
[ 0.563886] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned 0 after 38 usecs
[ 0.579333] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[ 0.579583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.579584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.579585] usb usb1: Product: xHCI Host Controller
[ 0.579586] usb usb1: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.579586] usb usb1: SerialNumber: 0000:15:00.0
[ 0.579699] hub 1-0:1.0: USB hub found
[ 0.579715] hub 1-0:1.0: 10 ports detected
[ 0.580169] xhci_hcd 0000:15:00.0: xHCI Host Controller
[ 0.580171] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
[ 0.580173] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.580198] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.580209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.580210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580211] usb usb2: Product: xHCI Host Controller
[ 0.580212] usb usb2: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.580213] usb usb2: SerialNumber: 0000:15:00.0
[ 0.580286] hub 2-0:1.0: USB hub found
[ 0.580297] hub 2-0:1.0: 4 ports detected
[ 0.580519] xhci_hcd 0000:38:00.3: xHCI Host Controller
[ 0.580521] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
[ 0.580704] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410
[ 0.581066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.581067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581068] usb usb3: Product: xHCI Host Controller
[ 0.581069] usb usb3: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.581070] usb usb3: SerialNumber: 0000:38:00.3
[ 0.581165] hub 3-0:1.0: USB hub found
[ 0.581179] hub 3-0:1.0: 4 ports detected
[ 0.581540] xhci_hcd 0000:38:00.3: xHCI Host Controller
[ 0.581542] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
[ 0.581543] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.581567] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.581578] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.581579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581580] usb usb4: Product: xHCI Host Controller
[ 0.581581] usb usb4: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.581582] usb usb4: SerialNumber: 0000:38:00.3
[ 0.581661] hub 4-0:1.0: USB hub found
[ 0.581669] hub 4-0:1.0: 4 ports detected
[ 0.582030] xhci_hcd 0000:38:00.4: xHCI Host Controller
[ 0.582032] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
[ 0.582190] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410
[ 0.582504] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.582505] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.582505] usb usb5: Product: xHCI Host Controller
[ 0.582506] usb usb5: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.582507] usb usb5: SerialNumber: 0000:38:00.4
[ 0.582588] hub 5-0:1.0: USB hub found
[ 0.582592] hub 5-0:1.0: 1 port detected
[ 0.582688] xhci_hcd 0000:38:00.4: xHCI Host Controller
[ 0.582690] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
[ 0.582692] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.582716] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.582727] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.582728] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.582729] usb usb6: Product: xHCI Host Controller
[ 0.582730] usb usb6: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[ 0.582731] usb usb6: SerialNumber: 0000:38:00.4
[ 0.582797] hub 6-0:1.0: USB hub found
[ 0.582801] hub 6-0:1.0: 1 port detected
[ 0.582905] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 18611 usecs
[ 0.850253] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.914084] usb 1-10: new low-speed USB device number 2 using xhci_hcd
[ 0.918081] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[ 1.016786] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.017684] ata9.00: supports DRM functions and may not be fully accessible
[ 1.017766] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[ 1.017769] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.018739] ata9.00: supports DRM functions and may not be fully accessible
[ 1.019487] ata9.00: configured for UDMA/133
[ 1.080915] usb 5-1: New USB device found, idVendor=413c, idProduct=3012, bcdDevice=43.01
[ 1.080918] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.080920] usb 5-1: Product: Dell USB Optical Mouse
[ 1.080922] usb 5-1: Manufacturer: Dell
[ 1.098214] calling hid_init+0x0/0x5d [hid] @ 127
[ 1.098225] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.098232] initcall hid_init+0x0/0x5d [hid] returned 0 after 13 usecs
[ 1.098894] calling hid_init+0x0/0x1000 [usbhid] @ 127
[ 1.103376] usbcore: registered new interface driver usbhid
[ 1.103377] usbhid: USB HID core driver
[ 1.103385] initcall hid_init+0x0/0x1000 [usbhid] returned 0 after 4378 usecs
[ 1.104253] calling hid_generic_init+0x0/0x1000 [hid_generic] @ 127
[ 1.104383] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:38:00.4/usb5/5-1/5-1:1.0/0003:413C:3012.0001/input/input0
[ 1.104477] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:38:00.4-1/input0
[ 1.104493] initcall hid_generic_init+0x0/0x1000 [hid_generic] returned 0 after 232 usecs
[ 1.105221] calling evdev_init+0x0/0x1000 [evdev] @ 127
[ 1.105253] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 28 usecs
[ 1.162858] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.201712] usb 1-10: New USB device found, idVendor=413c, idProduct=2105, bcdDevice= 3.52
[ 1.201716] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.201719] usb 1-10: Product: Dell USB Keyboard
[ 1.201721] usb 1-10: Manufacturer: Dell
[ 1.212049] tsc: Refined TSC clocksource calibration: 3503.008 MHz
[ 1.212057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e6a7724f, max_idle_ns: 440795228212 ns
[ 1.212270] clocksource: Switched to clocksource tsc
[ 1.266120] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:413C:2105.0002/input/input1
[ 1.324665] hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:15:00.0-10/input0
[ 1.478997] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.796135] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.796567] scsi 8:0:0:0: Direct-Access ATA CT1000MX500SSD4 020 PQ: 0 ANSI: 5
[ 1.798577] calling init_sd+0x0/0x1000 [sd_mod] @ 127
[ 1.798678] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 94 usecs
[ 1.798684] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.798686] sd 8:0:0:0: [sda] 4096-byte physical blocks
[ 1.798690] sd 8:0:0:0: [sda] Write Protect is off
[ 1.798691] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.798696] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.799763] sda: sda1 sda2 sda3
[ 1.800206] sd 8:0:0:0: [sda] supports TCG Opal
[ 1.800207] sd 8:0:0:0: [sda] Attached SCSI disk
[ 1.825201] calling md_init+0x0/0x1000 [md_mod] @ 185
[ 1.825383] initcall md_init+0x0/0x1000 [md_mod] returned 0 after 169 usecs
[ 1.825574] calling linear_init+0x0/0x1000 [linear] @ 185
[ 1.825577] initcall linear_init+0x0/0x1000 [linear] returned 0 after 0 usecs
[ 1.826816] calling multipath_init+0x0/0x1000 [multipath] @ 190
[ 1.826819] initcall multipath_init+0x0/0x1000 [multipath] returned 0 after 0 usecs
[ 1.827956] calling raid0_init+0x0/0x1000 [raid0] @ 193
[ 1.827959] initcall raid0_init+0x0/0x1000 [raid0] returned 0 after 0 usecs
[ 1.829407] calling raid_init+0x0/0x1000 [raid1] @ 196
[ 1.829411] initcall raid_init+0x0/0x1000 [raid1] returned 0 after 0 usecs
[ 1.830579] calling init_module+0x0/0x1000 [raid6_pq] @ 199
[ 1.896240] raid6: sse2x1 gen() 8906 MB/s
[ 1.964295] raid6: sse2x1 xor() 7808 MB/s
[ 2.032243] raid6: sse2x2 gen() 15159 MB/s
[ 2.100021] raid6: sse2x2 xor() 10583 MB/s
[ 2.168239] raid6: sse2x4 gen() 17192 MB/s
[ 2.236250] raid6: sse2x4 xor() 9812 MB/s
[ 2.304240] raid6: avx2x1 gen() 18281 MB/s
[ 2.372022] raid6: avx2x1 xor() 13971 MB/s
[ 2.440021] raid6: avx2x2 gen() 23442 MB/s
[ 2.508342] raid6: avx2x2 xor() 15063 MB/s
[ 2.576247] raid6: avx2x4 gen() 24407 MB/s
[ 2.644022] raid6: avx2x4 xor() 13683 MB/s
[ 2.644022] raid6: using algorithm avx2x4 gen() 24407 MB/s
[ 2.644023] raid6: .... xor() 13683 MB/s, rmw enabled
[ 2.644023] raid6: using avx2x2 recovery algorithm
[ 2.644025] initcall init_module+0x0/0x1000 [raid6_pq] returned 0 after 794379 usecs
[ 2.644588] calling async_tx_init+0x0/0x1000 [async_tx] @ 199
[ 2.644595] async_tx: api initialized (async)
[ 2.644599] initcall async_tx_init+0x0/0x1000 [async_tx] returned 0 after 6 usecs
[ 2.644900] calling calibrate_xor_blocks+0x0/0xf45 [xor] @ 199
[ 2.644901] xor: automatically using best checksumming function avx
[ 2.644905] initcall calibrate_xor_blocks+0x0/0xf45 [xor] returned 0 after 1 usecs
[ 2.645388] calling async_pq_init+0x0/0x1000 [async_pq] @ 199
[ 2.645393] initcall async_pq_init+0x0/0x1000 [async_pq] returned 0 after 0 usecs
[ 2.646054] calling crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 199
[ 2.646124] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 63 usecs
[ 2.646311] calling libcrc32c_mod_init+0x0/0x1000 [libcrc32c] @ 199
[ 2.646316] initcall libcrc32c_mod_init+0x0/0x1000 [libcrc32c] returned 0 after 2 usecs
[ 2.648092] calling raid5_init+0x0/0x1000 [raid456] @ 199
[ 2.648152] initcall raid5_init+0x0/0x1000 [raid456] returned 0 after 53 usecs
[ 2.651525] calling raid_init+0x0/0x1000 [raid10] @ 215
[ 2.651529] initcall raid_init+0x0/0x1000 [raid10] returned 0 after 0 usecs
[ 2.660106] calling dm_init+0x0/0x4d [dm_mod] @ 224
[ 2.660189] device-mapper: uevent: version 1.0.3
[ 2.660281] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 2.660288] initcall dm_init+0x0/0x4d [dm_mod] returned 0 after 171 usecs
[ 2.660801] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 224
[ 2.660803] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 0 usecs
[ 20.789437] random: crng init done
[ 23.548952] calling fscrypt_init+0x0/0x1000 [fscrypto] @ 293
[ 23.549089] initcall fscrypt_init+0x0/0x1000 [fscrypto] returned 0 after 129 usecs
[ 23.550581] calling journal_init+0x0/0x556 [jbd2] @ 293
[ 23.550729] initcall journal_init+0x0/0x556 [jbd2] returned 0 after 139 usecs
[ 23.550933] calling mbcache_init+0x0/0x1000 [mbcache] @ 293
[ 23.550999] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 62 usecs
[ 23.558019] calling ext4_init_fs+0x0/0x190 [ext4] @ 293
[ 23.558275] initcall ext4_init_fs+0x0/0x190 [ext4] returned 0 after 238 usecs
[ 23.602901] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 23.712818] calling init_autofs_fs+0x0/0x26 [autofs4] @ 1
[ 23.712871] initcall init_autofs_fs+0x0/0x26 [autofs4] returned 0 after 47 usecs
[ 23.717181] calling xt_init+0x0/0x1000 [x_tables] @ 1
[ 23.717186] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 1 usecs
[ 23.718548] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[ 23.718555] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 3 usecs
[ 23.727905] calling efivarfs_init+0x0/0x1000 [efivarfs] @ 330
[ 23.727908] initcall efivarfs_init+0x0/0x1000 [efivarfs] returned 0 after 0 usecs
[ 23.760391] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 23.780129] systemd[1]: Detected architecture x86-64.
[ 23.784857] systemd[1]: Set hostname to <tokeiihto>.
[ 23.864300] systemd[1]: Listening on udev Kernel Socket.
[ 23.864390] systemd[1]: Listening on udev Control Socket.
[ 23.865191] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 23.865232] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 23.865251] systemd[1]: Reached target User and Group Name Lookups.
[ 23.865409] systemd[1]: Created slice User and Session Slice.
[ 23.865499] systemd[1]: Listening on Journal Socket (/dev/log).
[ 23.884770] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 23.987637] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 377
[ 23.987685] acpi_cpufreq: overriding BIOS provided _PSD data
[ 23.987784] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 139 usecs
[ 23.988924] calling pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] @ 364
[ 23.988943] initcall pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] returned -19 after 15 usecs
[ 23.991239] calling acpi_button_driver_init+0x0/0x1000 [button] @ 372
[ 23.991331] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 23.991373] ACPI: Power Button [PWRB]
[ 23.991428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 23.991470] ACPI: Power Button [PWRF]
[ 23.991504] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 253 usecs
[ 23.999945] calling fjes_init_module+0x0/0xd1 [fjes] @ 366
[ 24.000058] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 105 usecs
[ 24.001615] calling acpi_video_init+0x0/0x1000 [video] @ 379
[ 24.001690] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 70 usecs
[ 24.002284] systemd-journald[350]: Received request to flush runtime journal from PID 1
[ 24.007644] systemd-journald[350]: File /var/log/journal/b2c50e138489450cac9b1fc61f4d89bc/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 24.055286] calling parport_default_proc_register+0x0/0x1000 [parport] @ 368
[ 24.055299] calling acpi_wmi_init+0x0/0x1000 [wmi] @ 364
[ 24.055302] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 10 usecs
[ 24.055701] calling piix4_driver_init+0x0/0x1000 [i2c_piix4] @ 367
[ 24.055770] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 24.055771] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 24.056033] calling init_soundcore+0x0/0x1000 [soundcore] @ 371
[ 24.056039] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 3 usecs
[ 24.056119] initcall piix4_driver_init+0x0/0x1000 [i2c_piix4] returned 0 after 81 usecs
[ 24.056391] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 345 usecs
[ 24.056945] calling parport_pc_init+0x0/0xf25 [parport_pc] @ 368
[ 24.057004] parport_pc 00:04: reported by Plug and Play ACPI
[ 24.057113] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 24.058985] calling alsa_sound_init+0x0/0x82 [snd] @ 371
[ 24.059005] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 14 usecs
[ 24.059186] calling sp5100_tco_init+0x0/0x1000 [sp5100_tco] @ 367
[ 24.059189] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 24.059266] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 24.059276] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 24.059302] initcall sp5100_tco_init+0x0/0x1000 [sp5100_tco] returned 0 after 111 usecs
[ 24.060430] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 371
[ 24.060459] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 25 usecs
[ 24.075236] calling fjes_init_module+0x0/0xd1 [fjes] @ 372
[ 24.075240] calling rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 366
[ 24.075260] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 24.075413] calling drm_core_init+0x0/0xcd [drm] @ 369
[ 24.075546] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 371
[ 24.075575] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 16 usecs
[ 24.075674] initcall drm_core_init+0x0/0xcd [drm] returned 0 after 108 usecs
[ 24.076746] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 377
[ 24.076752] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 3 usecs
[ 24.077040] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 281 usecs
[ 24.081560] calling k10temp_driver_init+0x0/0x1000 [k10temp] @ 374
[ 24.081570] calling hda_bus_init+0x0/0x11 [snd_hda_core] @ 377
[ 24.081588] initcall hda_bus_init+0x0/0x11 [snd_hda_core] returned 0 after 12 usecs
[ 24.081632] initcall k10temp_driver_init+0x0/0x1000 [k10temp] returned 0 after 57 usecs
[ 24.081770] calling drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 369
[ 24.081789] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 12 usecs
[ 24.084241] calling pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 375
[ 24.084289] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 24.084337] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 90 usecs
[ 24.087063] calling pcsp_init+0x0/0x1000 [snd_pcsp] @ 375
[ 24.087067] Error: Driver 'pcspkr' is already registered, aborting...
[ 24.087092] initcall pcsp_init+0x0/0x1000 [snd_pcsp] returned -16 after 25 usecs
[ 24.087972] calling azx_driver_init+0x0/0xfd8 [snd_hda_intel] @ 377
[ 24.088127] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
[ 24.088420] initcall azx_driver_init+0x0/0xfd8 [snd_hda_intel] returned 0 after 432 usecs
[ 24.089391] calling init_sg+0x0/0x1000 [sg] @ 373
[ 24.089464] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 24.089467] initcall init_sg+0x0/0x1000 [sg] returned 0 after 72 usecs
[ 24.092721] calling init_module+0x0/0x2f [efivars] @ 378
[ 24.092722] EFI Variables Facility v0.08 2004-May-17
[ 24.095193] r8169 0000:18:00.0 eth0: RTL8168h/8111h, 30:9c:23:04:d6:98, XID 54100800, IRQ 55
[ 24.095195] r8169 0000:18:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 24.096629] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 3810 usecs
[ 24.098160] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 386
[ 24.107427] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 9042 usecs
[ 24.109682] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
[ 24.109921] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
[ 24.109966] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
[ 24.110155] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
[ 24.110201] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
[ 24.110391] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10
[ 24.112394] initcall init_module+0x0/0x2f [efivars] returned 0 after 13894 usecs
[ 24.156519] initcall parport_pc_init+0x0/0xf25 [parport_pc] returned 0 after 56984 usecs
[ 24.165454] calling efivars_pstore_init+0x0/0x1000 [efi_pstore] @ 378
[ 24.167320] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 374
[ 24.167433] pstore: Registered efi as persistent store backend
[ 24.167437] initcall efivars_pstore_init+0x0/0x1000 [efi_pstore] returned 0 after 109 usecs
[ 24.167470] calling fjes_init_module+0x0/0xd1 [fjes] @ 370
[ 24.167579] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 102 usecs
[ 24.169886] EXT4-fs (sda2): recovery complete
[ 24.169888] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 24.170238] calling ttm_init+0x0/0x1000 [ttm] @ 369
[ 24.171195] initcall ttm_init+0x0/0x1000 [ttm] returned 0 after 926 usecs
[ 24.172318] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 2025 usecs
[ 24.173451] calling drm_sched_fence_slab_init+0x0/0xec9 [gpu_sched] @ 369
[ 24.173457] initcall drm_sched_fence_slab_init+0x0/0xec9 [gpu_sched] returned 0 after 3 usecs
[ 24.173903] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 364
[ 24.176529] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 2559 usecs
[ 24.180255] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 376
[ 24.184255] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 3897 usecs
[ 24.217425] r8169 0000:18:00.0 enp24s0: renamed from eth0
[ 24.227433] calling ppdev_init+0x0/0x1000 [ppdev] @ 372
[ 24.227528] ppdev: user-space parallel port driver
[ 24.227533] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 93 usecs
[ 24.227822] calling wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] @ 368
[ 24.227886] initcall wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] returned 0 after 58 usecs
[ 24.228988] calling init_fat_fs+0x0/0xfcb [fat] @ 405
[ 24.229079] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 85 usecs
[ 24.232267] calling init_vfat_fs+0x0/0x1000 [vfat] @ 405
[ 24.232273] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 3 usecs
[ 24.251445] calling hwrng_modinit+0x0/0x1000 [rng_core] @ 364
[ 24.251487] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 38 usecs
[ 24.254758] calling sp_mod_init+0x0/0x1000 [ccp] @ 366
[ 24.254781] initcall sp_mod_init+0x0/0x1000 [ccp] returned 0 after 18 usecs
[ 24.255142] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 406
[ 24.255145] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs
[ 24.255831] calling amdgpu_init+0x0/0x86 [amdgpu] @ 369
[ 24.255843] [drm] amdgpu kernel modesetting enabled.
[ 24.257503] calling svm_init+0x0/0xb8e [kvm_amd] @ 364
[ 24.257505] kvm: disabled by bios
[ 24.257529] initcall svm_init+0x0/0xb8e [kvm_amd] returned -95 after 21 usecs
[ 24.258660] calling init_nls_ascii+0x0/0x1000 [nls_ascii] @ 410
[ 24.258663] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0 after 0 usecs
[ 24.259706] calling mce_amd_init+0x0/0x1000 [edac_mce_amd] @ 374
[ 24.259707] MCE: In-kernel MCE decoding enabled.
[ 24.259709] initcall mce_amd_init+0x0/0x1000 [edac_mce_amd] returned 0 after 0 usecs
[ 24.260789] calling amd64_edac_init+0x0/0x2000 [amd64_edac_mod] @ 374
[ 24.260799] EDAC amd64: Node 0: DRAM ECC disabled.
[ 24.260800] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 24.260804] initcall amd64_edac_init+0x0/0x2000 [amd64_edac_mod] returned -19 after 11 usecs
[ 24.263395] calling kfd_module_init+0x0/0x1000 [amdkfd] @ 411
[ 24.263441] Parsing CRAT table with 1 nodes
[ 24.263451] Creating topology SYSFS entries
[ 24.263480] Topology: Add APU node [0x0:0x0]
[ 24.263480] Finished initializing topology
[ 24.263503] kfd kfd: Initialized module
[ 24.263510] initcall kfd_module_init+0x0/0x1000 [amdkfd] returned 0 after 104 usecs
[ 24.263660] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 24.263661] fb: switching to amdgpudrmfb from EFI VGA
[ 24.263676] Console: switching to colour dummy device 80x25
[ 24.263908] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
[ 24.263919] [drm] register mmio base: 0xFE600000
[ 24.263919] [drm] register mmio size: 524288
[ 24.263925] [drm] probing gen 2 caps for device 1022:15db = 700d03/e
[ 24.263926] [drm] probing mlw for device 1022:15db = 700d03
[ 24.263929] [drm] add ip block number 0 <soc15_common>
[ 24.263929] [drm] add ip block number 1 <gmc_v9_0>
[ 24.263930] [drm] add ip block number 2 <vega10_ih>
[ 24.263930] [drm] add ip block number 3 <psp>
[ 24.263931] [drm] add ip block number 4 <powerplay>
[ 24.263932] [drm] add ip block number 5 <dm>
[ 24.263932] [drm] add ip block number 6 <gfx_v9_0>
[ 24.263933] [drm] add ip block number 7 <sdma_v4_0>
[ 24.263933] [drm] add ip block number 8 <vcn_v1_0>
[ 24.266813] kfd kfd: DID 15dd is missing in supported_devices
[ 24.266815] kfd kfd: kgd2kfd_probe failed
[ 24.266826] [drm] VCN decode is enabled in VM mode
[ 24.266826] [drm] VCN encode is enabled in VM mode
[ 24.289341] [drm] BIOS signature incorrect 0 0
[ 24.289373] ATOM BIOS: 113-RAVEN-106
[ 24.289410] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 24.289432] amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[ 24.289434] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[ 24.289438] [drm] Detected VRAM RAM=1024M, BAR=1024M
[ 24.289439] [drm] RAM width 128bits DDR4
[ 24.289542] [TTM] Zone kernel: Available graphics memory: 7701238 kiB
[ 24.289543] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 24.289543] [TTM] Initializing pool allocator
[ 24.289558] [TTM] Initializing DMA pool allocator
[ 24.289612] [drm] amdgpu: 1024M of VRAM memory ready
[ 24.289613] [drm] amdgpu: 3072M of GTT memory ready.
[ 24.289635] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 24.289817] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 24.323790] [drm] use_doorbell being set to: [true]
[ 24.328718] calling amd64_edac_init+0x0/0x2000 [amd64_edac_mod] @ 364
[ 24.328728] EDAC amd64: Node 0: DRAM ECC disabled.
[ 24.328729] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 24.328732] initcall amd64_edac_init+0x0/0x2000 [amd64_edac_mod] returned -19 after 11 usecs
[ 24.331368] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[ 24.480285] amdgpu: [powerplay] dpm has been enabled
[ 24.490994] [drm] Display Core initialized with v3.1.44!
[ 24.519242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.519243] [drm] Driver supports precise vblank timestamp query.
[ 24.541977] [drm] VCN decode and encode initialized successfully.
[ 24.547379] [drm] fb mappable at 0xA1100000
[ 24.547380] [drm] vram apper at 0xA0000000
[ 24.547381] [drm] size 33177600
[ 24.547382] [drm] fb depth is 24
[ 24.547382] [drm] pitch is 15360
[ 24.547462] fbcon: amdgpudrmfb (fb0) is primary device
[ 24.578543] Console: switching to colour frame buffer device 480x135
[ 24.625399] amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
[ 24.644117] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[ 24.644120] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
[ 24.644122] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
[ 24.644123] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
[ 24.644125] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
[ 24.644126] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
[ 24.644127] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
[ 24.644129] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
[ 24.644130] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
[ 24.644132] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
[ 24.644134] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
[ 24.644135] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
[ 24.644137] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
[ 24.644138] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[ 24.644462] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 24.644656] r8169 0000:18:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
[ 24.644660] r8169 0000:18:00.0 enp24s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
[ 24.647332] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:38:00.0 on minor 0
[ 24.647464] initcall amdgpu_init+0x0/0x86 [amdgpu] returned 0 after 311212 usecs
[ 24.686588] r8169 0000:18:00.0 enp24s0: link down
[ 24.686622] r8169 0000:18:00.0 enp24s0: link down
[ 24.686733] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[ 25.109476] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 543
[ 25.109496] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 12 usecs
[ 25.111935] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 542
[ 25.113064] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 25.113067] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 25.113069] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 25.113070] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 25.113071] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 25.113073] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 25.113075] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 25.113076] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 25.113078] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 25.132732] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 20298 usecs
[ 25.133145] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
[ 25.133197] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
[ 25.133231] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
[ 25.133278] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
[ 25.133320] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
[ 25.133358] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
[ 25.133397] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17
[ 28.457629] r8169 0000:18:00.0 enp24s0: link up
[ 28.457637] IPv6: ADDRCONF(NETDEV_CHANGE): enp24s0: link becomes ready
[ 42.169412] calling fuse_init+0x0/0x1a6 [fuse] @ 938
[ 42.169414] fuse init (API version 7.27)
[ 42.169613] initcall fuse_init+0x0/0x1a6 [fuse] returned 0 after 187 usecs
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
2018-07-17 16:02 MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A` Paul Menzel
@ 2018-07-20 12:31 ` Jörg Rödel
[not found] ` <20180720123153.GC18541-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Jörg Rödel @ 2018-07-20 12:31 UTC (permalink / raw)
To: Paul Menzel; +Cc: iommu, Linux Kernel Mailing List
Hi Paul,
On Tue, Jul 17, 2018 at 06:02:07PM +0200, Paul Menzel wrote:
> $ dmesg
> […]
> [ 0.145696] calling pci_iommu_init+0x0/0x3f @ 1
> [ 0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
This is likely a firmware issue. Either the IVRS ACPI table is incorrect
or the BIOS did not enable the performance counter feature in the IOMMU
hardware. Are you running on the latest BIOS?
Joerg
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
[not found] ` <20180720123153.GC18541-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2018-07-23 10:09 ` Paul Menzel
[not found] ` <d2c5ee4a-e72b-672e-ae30-7b3cd5a43c63-KUpvgZVWgV9o1qOY/usvUg@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Paul Menzel @ 2018-07-23 10:09 UTC (permalink / raw)
To: Jörg Rödel
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1.1.1: Type: text/plain, Size: 1006 bytes --]
Dear Jörg,
On 07/20/18 14:31, Jörg Rödel wrote:
> On Tue, Jul 17, 2018 at 06:02:07PM +0200, Paul Menzel wrote:
>> $ dmesg
>> […]
>> [ 0.145696] calling pci_iommu_init+0x0/0x3f @ 1
>> [ 0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
>
> This is likely a firmware issue. Either the IVRS ACPI table is incorrect
Please find the output from
sudo iasl -d -p /dev/shm/ivrs.dsl /sys/firmware/acpi/tables/IVRS
attached.
[ 0.000000] ACPI: IVRS 0x000000009D3D8588 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
> or the BIOS did not enable the performance counter feature in the IOMMU
> hardware.
Is it possible to check that from the OS side?
> Are you running on the latest BIOS?
Yes, I am even using a “beta“ one from [1].
DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.G1 05/17/2018
Kind regards,
Paul
[1]: http://msi-ftp.de:8080/main.html?download&weblink=99df4e98c25ca3dcf0f6e7f8366cc1c7&realfilename=7A37_1g1.zip
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.1.2: ivrs.dsl --]
[-- Type: text/x-dsl; name="ivrs.dsl", Size: 4762 bytes --]
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180629 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembly of /sys/firmware/acpi/tables/IVRS, Mon Jul 23 12:07:58 2018
*
* ACPI Data Table [IVRS]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "IVRS" [I/O Virtualization Reporting Structure]
[004h 0004 4] Table Length : 000000D0
[008h 0008 1] Revision : 02
[009h 0009 1] Checksum : 7C
[00Ah 0010 6] Oem ID : "AMD "
[010h 0016 8] Oem Table ID : "AMD IVRS"
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "AMD "
[020h 0032 4] Asl Compiler Revision : 00000000
[024h 0036 4] Virtualization Info : 00203041
[028h 0040 8] Reserved : 0000000000000000
[030h 0048 1] Subtable Type : 10 [Hardware Definition Block]
[031h 0049 1] Flags : B0
[032h 0050 2] Length : 0048
[034h 0052 2] DeviceId : 0002
[036h 0054 2] Capability Offset : 0040
[038h 0056 8] Base Address : 00000000FEB80000
[040h 0064 2] PCI Segment Group : 0000
[042h 0066 2] Virtualization Info : 0000
[044h 0068 4] Reserved : 80048F6E
[048h 0072 1] Entry Type : 03
[049h 0073 2] Device ID : 0008
[04Bh 0075 1] Data Setting : 00
[04Ch 0076 1] Entry Type : 04
[04Dh 0077 2] Device ID : FFFE
[04Fh 0079 1] Data Setting : 00
[050h 0080 1] Entry Type : 43
[051h 0081 2] Device ID : FF00
[053h 0083 1] Data Setting : 00
[054h 0084 1] Reserved : 00
[055h 0085 2] Source Used Device ID : 00A4
[057h 0087 1] Reserved : 00
[058h 0088 1] Entry Type : 04
[059h 0089 2] Device ID : FFFF
[05Bh 0091 1] Data Setting : 00
[05Ch 0092 1] Entry Type : 00
[05Dh 0093 2] Device ID : 0000
[05Fh 0095 1] Data Setting : 00
[060h 0096 1] Entry Type : 48
[061h 0097 2] Device ID : 0000
[063h 0099 1] Data Setting : 00
[064h 0100 1] Handle : 00
[065h 0101 2] Source Used Device ID : 00A0
[067h 0103 1] Variety : 02
[068h 0104 1] Entry Type : 48
[069h 0105 2] Device ID : 0000
[06Bh 0107 1] Data Setting : D7
[06Ch 0108 1] Handle : 05
[06Dh 0109 2] Source Used Device ID : 00A0
[06Fh 0111 1] Variety : 01
[070h 0112 1] Entry Type : 48
[071h 0113 2] Device ID : 0000
[073h 0115 1] Data Setting : 00
[074h 0116 1] Handle : 06
[075h 0117 2] Source Used Device ID : 0001
[077h 0119 1] Variety : 01
[078h 0120 1] Subtable Type : 11 [Unknown Subtable Type]
[079h 0121 1] Flags : B0
[07Ah 0122 2] Length : 0058
[07Ch 0124 2] DeviceId : 0002
**** Unknown IVRS subtable type 0x11
Raw Table Data: Length 208 (0xD0)
0000: 49 56 52 53 D0 00 00 00 02 7C 41 4D 44 20 20 00 // IVRS.....|AMD .
0010: 41 4D 44 20 49 56 52 53 01 00 00 00 41 4D 44 20 // AMD IVRS....AMD
0020: 00 00 00 00 41 30 20 00 00 00 00 00 00 00 00 00 // ....A0 .........
0030: 10 B0 48 00 02 00 40 00 00 00 B8 FE 00 00 00 00 // ..H...@.........
0040: 00 00 00 00 6E 8F 04 80 03 08 00 00 04 FE FF 00 // ....n...........
0050: 43 00 FF 00 00 A4 00 00 04 FF FF 00 00 00 00 00 // C...............
0060: 48 00 00 00 00 A0 00 02 48 00 00 D7 05 A0 00 01 // H.......H.......
0070: 48 00 00 00 06 01 00 01 11 B0 58 00 02 00 40 00 // H.........X...@.
0080: 00 00 B8 FE 00 00 00 00 00 00 00 00 00 02 04 00 // ................
0090: DA 4A 29 22 EF 77 4F 00 00 00 00 00 00 00 00 00 // .J)".wO.........
00A0: 03 08 00 00 04 FE FF 00 43 00 FF 00 00 A4 00 00 // ........C.......
00B0: 04 FF FF 00 00 00 00 00 48 00 00 00 00 A0 00 02 // ........H.......
00C0: 48 00 00 D7 05 A0 00 01 48 00 00 00 06 01 00 01 // H.......H.......
[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
[not found] ` <d2c5ee4a-e72b-672e-ae30-7b3cd5a43c63-KUpvgZVWgV9o1qOY/usvUg@public.gmane.org>
@ 2018-07-27 8:27 ` Jörg Rödel
2018-07-27 9:18 ` Paul Menzel
0 siblings, 1 reply; 6+ messages in thread
From: Jörg Rödel @ 2018-07-27 8:27 UTC (permalink / raw)
To: Paul Menzel
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Hi Paul,
On Mon, Jul 23, 2018 at 12:09:37PM +0200, Paul Menzel wrote:
> > or the BIOS did not enable the performance counter feature in the IOMMU
> > hardware.
>
> Is it possible to check that from the OS side?
It would be if we had the NB documentation, but I guess those details
are not publicly available.
> > Are you running on the latest BIOS?
>
> Yes, I am even using a “beta“ one from [1].
>
> DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.G1 05/17/2018
I think the best you can do is to report this as a bug to your BIOS
vendor and hope they'll fix it.
Joerg
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
2018-07-27 8:27 ` Jörg Rödel
@ 2018-07-27 9:18 ` Paul Menzel
2018-07-27 10:27 ` Jörg Rödel
0 siblings, 1 reply; 6+ messages in thread
From: Paul Menzel @ 2018-07-27 9:18 UTC (permalink / raw)
To: Jörg Rödel; +Cc: iommu, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1193 bytes --]
Dear Jörg,
On 07/27/18 10:27, Jörg Rödel wrote:
> On Mon, Jul 23, 2018 at 12:09:37PM +0200, Paul Menzel wrote:
>>> or the BIOS did not enable the performance counter feature in the IOMMU
>>> hardware.
>>
>> Is it possible to check that from the OS side?
>
> It would be if we had the NB documentation, but I guess those details
> are not publicly available.
On the AMD site [1] I see the three family 0x17 documents below.
1. Open-Source Register Reference for AMD Family 17h Processors (PUB)
2. Processor Programming Reference (PPR) for AMD Family 17h Models 00h-0Fh Processors (PUB)
3. Software Optimization Guide for AMD Family 17h Processors (PUB)
What documented is required? The BKDG?
>>> Are you running on the latest BIOS?
>>
>> Yes, I am even using a “beta“ one from [1].
>>
>> DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.G1 05/17/2018
>
> I think the best you can do is to report this as a bug to your BIOS
> vendor and hope they'll fix it.
I contacted them with the problem description. Let’s see what the
result will be.
Kind regards,
Paul
[1]: https://developer.amd.com/resources/developer-guides-manuals/
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
2018-07-27 9:18 ` Paul Menzel
@ 2018-07-27 10:27 ` Jörg Rödel
0 siblings, 0 replies; 6+ messages in thread
From: Jörg Rödel @ 2018-07-27 10:27 UTC (permalink / raw)
To: Paul Menzel; +Cc: iommu, linux-kernel
On Fri, Jul 27, 2018 at 11:18:56AM +0200, Paul Menzel wrote:
> On the AMD site [1] I see the three family 0x17 documents below.
>
> 1. Open-Source Register Reference for AMD Family 17h Processors (PUB)
> 2. Processor Programming Reference (PPR) for AMD Family 17h Models 00h-0Fh Processors (PUB)
> 3. Software Optimization Guide for AMD Family 17h Processors (PUB)
>
> What documented is required? The BKDG?
IIRC the PPR is the new BKDG, but the public version does not seem to
contain any references about how the IOMMU needs to be set up by
firmware.
Thanks,
Joerg
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-07-27 10:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-17 16:02 MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A` Paul Menzel
2018-07-20 12:31 ` Jörg Rödel
[not found] ` <20180720123153.GC18541-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2018-07-23 10:09 ` Paul Menzel
[not found] ` <d2c5ee4a-e72b-672e-ae30-7b3cd5a43c63-KUpvgZVWgV9o1qOY/usvUg@public.gmane.org>
2018-07-27 8:27 ` Jörg Rödel
2018-07-27 9:18 ` Paul Menzel
2018-07-27 10:27 ` Jörg Rödel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).