* [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n @ 2014-09-09 10:26 Masahiro Yamada 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada ` (2 more replies) 0 siblings, 3 replies; 18+ messages in thread From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw) To: linux-kbuild Cc: Masahiro Yamada, Mike Turquette, Linus Walleij, Takashi Yoshii, Jean-Christophe Plagniol-Villard, Hartley Sweeten, Greg Ungerer, Ryan Mallon, Geert Uytterhoeven, Laurent Pinchart, Wolfram Sang, Andrew Victor, linux-samsung-soc, Kukjin Kim, Russell King, Ben Dooks, Sam Ravnborg, Michal Marek, linux-omap, Ulrich Hecht, linux-arm-kernel, Simon Horman, Nicolas Ferre, netdev, linux-kernel, Tony Lindgren Masahiro Yamada (3): kbuild: remove unnecessary "obj- := dummy.o" trick kbuild: remove unnecessary variable initializaions kbuild: remove obj-n and lib-n handling arch/arm/mach-at91/Makefile | 3 --- arch/arm/mach-ebsa110/Makefile | 3 --- arch/arm/mach-ep93xx/Makefile | 3 --- arch/arm/mach-exynos/Makefile | 5 ----- arch/arm/mach-footbridge/Makefile | 3 --- arch/arm/mach-iop13xx/Makefile | 5 ----- arch/arm/mach-iop32x/Makefile | 3 --- arch/arm/mach-iop33x/Makefile | 3 --- arch/arm/mach-ks8695/Makefile | 3 --- arch/arm/mach-rpc/Makefile | 4 ---- arch/arm/mach-s3c24xx/Makefile | 5 ----- arch/arm/mach-s3c64xx/Makefile | 5 ----- arch/arm/mach-s5pv210/Makefile | 5 ----- arch/arm/mach-sa1100/Makefile | 3 --- arch/arm/mach-u300/Makefile | 3 --- arch/arm/plat-iop/Makefile | 6 ------ arch/arm/plat-omap/Makefile | 3 --- arch/arm/plat-samsung/Makefile | 5 ----- drivers/clk/shmobile/Makefile | 2 -- drivers/net/wimax/Makefile | 4 ---- firmware/Makefile | 2 +- scripts/Makefile.build | 4 ++-- scripts/Makefile.clean | 4 +--- scripts/Makefile.fwinst | 2 +- 24 files changed, 5 insertions(+), 83 deletions(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick 2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada @ 2014-09-09 10:26 ` Masahiro Yamada 2014-09-09 16:21 ` Peter Foley ` (2 more replies) 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada 2 siblings, 3 replies; 18+ messages in thread From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw) To: linux-kbuild Cc: Masahiro Yamada, Ben Dooks, Kukjin Kim, Russell King, Mike Turquette, Laurent Pinchart, Simon Horman, Geert Uytterhoeven, Wolfram Sang, Takashi Yoshii, Ulrich Hecht, linux-arm-kernel, linux-samsung-soc, linux-kernel, netdev In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, hence built-in.o is always created without such a trick. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> --- arch/arm/plat-samsung/Makefile | 1 - drivers/clk/shmobile/Makefile | 2 -- drivers/net/wimax/Makefile | 4 ---- 3 files changed, 7 deletions(-) diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 5fe1750..a402262 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -8,7 +8,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include obj-y := obj-m := -obj-n := dummy.o obj- := # Objects we always build independent of SoC choice diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile index e002923..9aab51c8 100644 --- a/drivers/clk/shmobile/Makefile +++ b/drivers/clk/shmobile/Makefile @@ -6,5 +6,3 @@ obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o -# for emply built-in.o -obj-n := dummy diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile index 992bc02..692184d 100644 --- a/drivers/net/wimax/Makefile +++ b/drivers/net/wimax/Makefile @@ -1,5 +1 @@ - obj-$(CONFIG_WIMAX_I2400M) += i2400m/ - -# (from Sam Ravnborg) force kbuild to create built-in.o -obj- := dummy.o -- 1.9.1 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada @ 2014-09-09 16:21 ` Peter Foley 2014-09-09 17:43 ` Mike Turquette 2014-09-10 3:40 ` David Miller 2 siblings, 0 replies; 18+ messages in thread From: Peter Foley @ 2014-09-09 16:21 UTC (permalink / raw) To: Masahiro Yamada Cc: linux-kbuild, Ben Dooks, Kukjin Kim, Russell King, Mike Turquette, Laurent Pinchart, Simon Horman, Geert Uytterhoeven, Wolfram Sang, Takashi Yoshii, Ulrich Hecht, linux-arm-kernel, linux-samsung-soc, LKML, netdev On Tue, Sep 9, 2014 at 6:26 AM, Masahiro Yamada <yamada.m@jp.panasonic.com> wrote: > In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, > hence built-in.o is always created without such a trick. > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Peter Foley <pefoley2@pefoley.com> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada 2014-09-09 16:21 ` Peter Foley @ 2014-09-09 17:43 ` Mike Turquette 2014-09-09 23:45 ` Simon Horman 2014-09-10 3:40 ` David Miller 2 siblings, 1 reply; 18+ messages in thread From: Mike Turquette @ 2014-09-09 17:43 UTC (permalink / raw) To: Masahiro Yamada, linux-kbuild Cc: Ben Dooks, Kukjin Kim, Russell King, Laurent Pinchart, Simon Horman, Geert Uytterhoeven, Wolfram Sang, Takashi Yoshii, Ulrich Hecht, linux-arm-kernel, linux-samsung-soc, linux-kernel, netdev Quoting Masahiro Yamada (2014-09-09 03:26:19) > In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, > hence built-in.o is always created without such a trick. > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Mike Turquette <mturquette@linaro.org> > --- > > arch/arm/plat-samsung/Makefile | 1 - > drivers/clk/shmobile/Makefile | 2 -- > drivers/net/wimax/Makefile | 4 ---- > 3 files changed, 7 deletions(-) > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > index 5fe1750..a402262 100644 > --- a/arch/arm/plat-samsung/Makefile > +++ b/arch/arm/plat-samsung/Makefile > @@ -8,7 +8,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include > > obj-y := > obj-m := > -obj-n := dummy.o > obj- := > > # Objects we always build independent of SoC choice > diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile > index e002923..9aab51c8 100644 > --- a/drivers/clk/shmobile/Makefile > +++ b/drivers/clk/shmobile/Makefile > @@ -6,5 +6,3 @@ obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o > obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o > -# for emply built-in.o > -obj-n := dummy > diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile > index 992bc02..692184d 100644 > --- a/drivers/net/wimax/Makefile > +++ b/drivers/net/wimax/Makefile > @@ -1,5 +1 @@ > - > obj-$(CONFIG_WIMAX_I2400M) += i2400m/ > - > -# (from Sam Ravnborg) force kbuild to create built-in.o > -obj- := dummy.o > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick 2014-09-09 17:43 ` Mike Turquette @ 2014-09-09 23:45 ` Simon Horman 0 siblings, 0 replies; 18+ messages in thread From: Simon Horman @ 2014-09-09 23:45 UTC (permalink / raw) To: Mike Turquette Cc: Masahiro Yamada, linux-kbuild, Ben Dooks, Kukjin Kim, Russell King, Laurent Pinchart, Geert Uytterhoeven, Wolfram Sang, Takashi Yoshii, Ulrich Hecht, linux-arm-kernel, linux-samsung-soc, linux-kernel, netdev On Tue, Sep 09, 2014 at 10:43:37AM -0700, Mike Turquette wrote: > Quoting Masahiro Yamada (2014-09-09 03:26:19) > > In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, > > hence built-in.o is always created without such a trick. > > > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> > > Acked-by: Mike Turquette <mturquette@linaro.org> shmobile portion: Acked-by: Simon Horman <horms+renesas@verge.net.au> > > > --- > > > > arch/arm/plat-samsung/Makefile | 1 - > > drivers/clk/shmobile/Makefile | 2 -- > > drivers/net/wimax/Makefile | 4 ---- > > 3 files changed, 7 deletions(-) > > > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > > index 5fe1750..a402262 100644 > > --- a/arch/arm/plat-samsung/Makefile > > +++ b/arch/arm/plat-samsung/Makefile > > @@ -8,7 +8,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include > > > > obj-y := > > obj-m := > > -obj-n := dummy.o > > obj- := > > > > # Objects we always build independent of SoC choice > > diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile > > index e002923..9aab51c8 100644 > > --- a/drivers/clk/shmobile/Makefile > > +++ b/drivers/clk/shmobile/Makefile > > @@ -6,5 +6,3 @@ obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o > > obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o > > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o > > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o > > -# for emply built-in.o > > -obj-n := dummy > > diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile > > index 992bc02..692184d 100644 > > --- a/drivers/net/wimax/Makefile > > +++ b/drivers/net/wimax/Makefile > > @@ -1,5 +1 @@ > > - > > obj-$(CONFIG_WIMAX_I2400M) += i2400m/ > > - > > -# (from Sam Ravnborg) force kbuild to create built-in.o > > -obj- := dummy.o > > -- > > 1.9.1 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada 2014-09-09 16:21 ` Peter Foley 2014-09-09 17:43 ` Mike Turquette @ 2014-09-10 3:40 ` David Miller 2 siblings, 0 replies; 18+ messages in thread From: David Miller @ 2014-09-10 3:40 UTC (permalink / raw) To: yamada.m Cc: linux-kbuild, ben-linux, kgene.kim, linux, mturquette, laurent.pinchart+renesas, horms+renesas, geert, wsa, takasi-y, ulrich.hecht, linux-arm-kernel, linux-samsung-soc, linux-kernel, netdev From: Masahiro Yamada <yamada.m@jp.panasonic.com> Date: Tue, 9 Sep 2014 19:26:19 +0900 > In these Makefiles, at least one of "obj-y" and "obj-" is non-empty, > hence built-in.o is always created without such a trick. > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> For networking: Acked-by: David S. Miller <davem@davemloft.net> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/3] kbuild: remove unnecessary variable initializaions 2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada @ 2014-09-09 10:26 ` Masahiro Yamada 2014-09-09 11:52 ` Nicolas Ferre ` (2 more replies) 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada 2 siblings, 3 replies; 18+ messages in thread From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw) To: linux-kbuild Cc: Masahiro Yamada, Andrew Victor, Nicolas Ferre, Jean-Christophe Plagniol-Villard, Russell King, Hartley Sweeten, Ryan Mallon, Kukjin Kim, Greg Ungerer, Ben Dooks, Linus Walleij, Tony Lindgren, linux-arm-kernel, linux-kernel, linux-samsung-soc, linux-omap Clearing obj-y, obj-m, obj-n, obj- in each Makefile is a useless habit. They are non-exported variables; therefore they are always empty whenever descending into each subdirectory. (Moreorver, obj-y and obj-m are also set to empty at the beginning of scripts/Makefile.build) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> --- arch/arm/mach-at91/Makefile | 3 --- arch/arm/mach-ebsa110/Makefile | 3 --- arch/arm/mach-ep93xx/Makefile | 3 --- arch/arm/mach-exynos/Makefile | 5 ----- arch/arm/mach-footbridge/Makefile | 3 --- arch/arm/mach-iop13xx/Makefile | 5 ----- arch/arm/mach-iop32x/Makefile | 3 --- arch/arm/mach-iop33x/Makefile | 3 --- arch/arm/mach-ks8695/Makefile | 3 --- arch/arm/mach-rpc/Makefile | 4 ---- arch/arm/mach-s3c24xx/Makefile | 5 ----- arch/arm/mach-s3c64xx/Makefile | 5 ----- arch/arm/mach-s5pv210/Makefile | 5 ----- arch/arm/mach-sa1100/Makefile | 3 --- arch/arm/mach-u300/Makefile | 3 --- arch/arm/plat-iop/Makefile | 6 ------ arch/arm/plat-omap/Makefile | 3 --- arch/arm/plat-samsung/Makefile | 4 ---- 18 files changed, 69 deletions(-) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec..75033839 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -3,9 +3,6 @@ # obj-y := irq.o gpio.o setup.o sysirq_mask.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile index 935e4af..a7d68c1 100644 --- a/arch/arm/mach-ebsa110/Makefile +++ b/arch/arm/mach-ebsa110/Makefile @@ -5,6 +5,3 @@ # Object file lists. obj-y := core.o io.o leds.o -obj-m := -obj-n := -obj- := diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0dc51f9..78d427b 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -2,9 +2,6 @@ # Makefile for the linux kernel. # obj-y := core.o clock.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 788f26d..27ae614 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index c3faa3b..e83d5c8 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -5,9 +5,6 @@ # Object file lists. obj-y := common.o dma.o isa-irq.o -obj-m := -obj-n := -obj- := pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile index cad015f..a3d9260 100644 --- a/arch/arm/mach-iop13xx/Makefile +++ b/arch/arm/mach-iop13xx/Makefile @@ -1,8 +1,3 @@ -obj-y := -obj-m := -obj-n := -obj- := - obj-$(CONFIG_ARCH_IOP13XX) += setup.o obj-$(CONFIG_ARCH_IOP13XX) += irq.o obj-$(CONFIG_ARCH_IOP13XX) += pci.o diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index cfdf8a1..2d4010a 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile @@ -3,9 +3,6 @@ # obj-y := irq.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_GLANTANK) += glantank.o obj-$(CONFIG_ARCH_IQ80321) += iq80321.o diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index 90081d8..e95db30 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile @@ -3,9 +3,6 @@ # obj-y := irq.o uart.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_ARCH_IQ80331) += iq80331.o obj-$(CONFIG_MACH_IQ80332) += iq80332.o diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index e370caf..8ecb797 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -4,9 +4,6 @@ # obj-y := cpu.o irq.o time.o devices.o -obj-m := -obj-n := -obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 992e28b..2ebc687 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -5,7 +5,3 @@ # Object file lists. obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o -obj-m := -obj-n := -obj- := - diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 2235d0d..b920716 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -7,11 +7,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # core obj-y += common.o diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 58069a7..12f67b6 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -5,11 +5,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-y += common.o diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 7dc2d0e..72b9e96 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 2732eef..f1114d1 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -4,9 +4,6 @@ # Common support obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o -obj-m := -obj-n := -obj- := # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 3ec74ac..87d37de 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -3,9 +3,6 @@ # obj-y := core.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 224e56c..f2af203 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -2,8 +2,6 @@ # Makefile for the linux kernel. # -obj-y := - # IOP32X obj-$(CONFIG_ARCH_IOP32X) += i2c.o obj-$(CONFIG_ARCH_IOP32X) += pci.o @@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o obj-$(CONFIG_ARCH_IOP13XX) += time.o - -obj-m := -obj-n := -obj- := diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 0b01b68..97a50e8 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include # Common support obj-y := sram.o dma.o counter_32k.o -obj-m := -obj-n := -obj- := # omap_device support (OMAP2+ only at the moment) diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index a402262..f0a0084 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -6,10 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include -obj-y := -obj-m := -obj- := - # Objects we always build independent of SoC choice obj-y += init.o cpu.o -- 1.9.1 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada @ 2014-09-09 11:52 ` Nicolas Ferre 2014-09-09 16:23 ` Peter Foley 2014-09-23 14:56 ` Linus Walleij 2 siblings, 0 replies; 18+ messages in thread From: Nicolas Ferre @ 2014-09-09 11:52 UTC (permalink / raw) To: Masahiro Yamada, linux-kbuild Cc: Kukjin Kim, Russell King, Ryan Mallon, Tony Lindgren, Linus Walleij, linux-kernel, Hartley Sweeten, linux-samsung-soc, Ben Dooks, Greg Ungerer, linux-omap, Jean-Christophe Plagniol-Villard, Andrew Victor, linux-arm-kernel On 09/09/2014 12:26, Masahiro Yamada : > Clearing obj-y, obj-m, obj-n, obj- in each Makefile is > a useless habit. > > They are non-exported variables; therefore they are always empty > whenever descending into each subdirectory. > (Moreorver, obj-y and obj-m are also set to empty at the beginning > of scripts/Makefile.build) > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> > --- > > arch/arm/mach-at91/Makefile | 3 --- > arch/arm/mach-ebsa110/Makefile | 3 --- > arch/arm/mach-ep93xx/Makefile | 3 --- > arch/arm/mach-exynos/Makefile | 5 ----- > arch/arm/mach-footbridge/Makefile | 3 --- > arch/arm/mach-iop13xx/Makefile | 5 ----- > arch/arm/mach-iop32x/Makefile | 3 --- > arch/arm/mach-iop33x/Makefile | 3 --- > arch/arm/mach-ks8695/Makefile | 3 --- > arch/arm/mach-rpc/Makefile | 4 ---- > arch/arm/mach-s3c24xx/Makefile | 5 ----- > arch/arm/mach-s3c64xx/Makefile | 5 ----- > arch/arm/mach-s5pv210/Makefile | 5 ----- > arch/arm/mach-sa1100/Makefile | 3 --- > arch/arm/mach-u300/Makefile | 3 --- > arch/arm/plat-iop/Makefile | 6 ------ > arch/arm/plat-omap/Makefile | 3 --- > arch/arm/plat-samsung/Makefile | 4 ---- > 18 files changed, 69 deletions(-) > > diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile > index 78e9cec..75033839 100644 > --- a/arch/arm/mach-at91/Makefile > +++ b/arch/arm/mach-at91/Makefile > @@ -3,9 +3,6 @@ > # > > obj-y := irq.o gpio.o setup.o sysirq_mask.o > -obj-m := > -obj-n := > -obj- := I agree: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> But I have patches that will mess with these changes already queued for 3.18. You may have to signal these conflicts when carrying the patch upstream. Thanks, best regards, > obj-$(CONFIG_OLD_CLK_AT91) += clock.o > obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o > diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile > index 935e4af..a7d68c1 100644 > --- a/arch/arm/mach-ebsa110/Makefile > +++ b/arch/arm/mach-ebsa110/Makefile > @@ -5,6 +5,3 @@ > # Object file lists. > > obj-y := core.o io.o leds.o > -obj-m := > -obj-n := > -obj- := > diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile > index 0dc51f9..78d427b 100644 > --- a/arch/arm/mach-ep93xx/Makefile > +++ b/arch/arm/mach-ep93xx/Makefile > @@ -2,9 +2,6 @@ > # Makefile for the linux kernel. > # > obj-y := core.o clock.o > -obj-m := > -obj-n := > -obj- := > > obj-$(CONFIG_EP93XX_DMA) += dma.o > > diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile > index 788f26d..27ae614 100644 > --- a/arch/arm/mach-exynos/Makefile > +++ b/arch/arm/mach-exynos/Makefile > @@ -7,11 +7,6 @@ > > ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include > > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > # Core > > obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o > diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile > index c3faa3b..e83d5c8 100644 > --- a/arch/arm/mach-footbridge/Makefile > +++ b/arch/arm/mach-footbridge/Makefile > @@ -5,9 +5,6 @@ > # Object file lists. > > obj-y := common.o dma.o isa-irq.o > -obj-m := > -obj-n := > -obj- := > > pci-y += dc21285.o > pci-$(CONFIG_ARCH_CATS) += cats-pci.o > diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile > index cad015f..a3d9260 100644 > --- a/arch/arm/mach-iop13xx/Makefile > +++ b/arch/arm/mach-iop13xx/Makefile > @@ -1,8 +1,3 @@ > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > obj-$(CONFIG_ARCH_IOP13XX) += setup.o > obj-$(CONFIG_ARCH_IOP13XX) += irq.o > obj-$(CONFIG_ARCH_IOP13XX) += pci.o > diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile > index cfdf8a1..2d4010a 100644 > --- a/arch/arm/mach-iop32x/Makefile > +++ b/arch/arm/mach-iop32x/Makefile > @@ -3,9 +3,6 @@ > # > > obj-y := irq.o > -obj-m := > -obj-n := > -obj- := > > obj-$(CONFIG_MACH_GLANTANK) += glantank.o > obj-$(CONFIG_ARCH_IQ80321) += iq80321.o > diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile > index 90081d8..e95db30 100644 > --- a/arch/arm/mach-iop33x/Makefile > +++ b/arch/arm/mach-iop33x/Makefile > @@ -3,9 +3,6 @@ > # > > obj-y := irq.o uart.o > -obj-m := > -obj-n := > -obj- := > > obj-$(CONFIG_ARCH_IQ80331) += iq80331.o > obj-$(CONFIG_MACH_IQ80332) += iq80332.o > diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile > index e370caf..8ecb797 100644 > --- a/arch/arm/mach-ks8695/Makefile > +++ b/arch/arm/mach-ks8695/Makefile > @@ -4,9 +4,6 @@ > # > > obj-y := cpu.o irq.o time.o devices.o > -obj-m := > -obj-n := > -obj- := > > # PCI support is optional > obj-$(CONFIG_PCI) += pci.o > diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile > index 992e28b..2ebc687 100644 > --- a/arch/arm/mach-rpc/Makefile > +++ b/arch/arm/mach-rpc/Makefile > @@ -5,7 +5,3 @@ > # Object file lists. > > obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o > -obj-m := > -obj-n := > -obj- := > - > diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile > index 2235d0d..b920716 100644 > --- a/arch/arm/mach-s3c24xx/Makefile > +++ b/arch/arm/mach-s3c24xx/Makefile > @@ -7,11 +7,6 @@ > # > # Licensed under GPLv2 > > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > # core > > obj-y += common.o > diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile > index 58069a7..12f67b6 100644 > --- a/arch/arm/mach-s3c64xx/Makefile > +++ b/arch/arm/mach-s3c64xx/Makefile > @@ -5,11 +5,6 @@ > # > # Licensed under GPLv2 > > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > # Core > > obj-y += common.o > diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile > index 7dc2d0e..72b9e96 100644 > --- a/arch/arm/mach-s5pv210/Makefile > +++ b/arch/arm/mach-s5pv210/Makefile > @@ -7,11 +7,6 @@ > > ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include > > -obj-y := > -obj-m := > -obj-n := > -obj- := > - > # Core > > obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o > diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile > index 2732eef..f1114d1 100644 > --- a/arch/arm/mach-sa1100/Makefile > +++ b/arch/arm/mach-sa1100/Makefile > @@ -4,9 +4,6 @@ > > # Common support > obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o > -obj-m := > -obj-n := > -obj- := > > # Specific board support > obj-$(CONFIG_SA1100_ASSABET) += assabet.o > diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile > index 3ec74ac..87d37de 100644 > --- a/arch/arm/mach-u300/Makefile > +++ b/arch/arm/mach-u300/Makefile > @@ -3,9 +3,6 @@ > # > > obj-y := core.o > -obj-m := > -obj-n := > -obj- := > > obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o > obj-$(CONFIG_REGULATOR_AB3100) += regulator.o > diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile > index 224e56c..f2af203 100644 > --- a/arch/arm/plat-iop/Makefile > +++ b/arch/arm/plat-iop/Makefile > @@ -2,8 +2,6 @@ > # Makefile for the linux kernel. > # > > -obj-y := > - > # IOP32X > obj-$(CONFIG_ARCH_IOP32X) += i2c.o > obj-$(CONFIG_ARCH_IOP32X) += pci.o > @@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o > # IOP13XX > obj-$(CONFIG_ARCH_IOP13XX) += cp6.o > obj-$(CONFIG_ARCH_IOP13XX) += time.o > - > -obj-m := > -obj-n := > -obj- := > diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile > index 0b01b68..97a50e8 100644 > --- a/arch/arm/plat-omap/Makefile > +++ b/arch/arm/plat-omap/Makefile > @@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include > > # Common support > obj-y := sram.o dma.o counter_32k.o > -obj-m := > -obj-n := > -obj- := > > # omap_device support (OMAP2+ only at the moment) > > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile > index a402262..f0a0084 100644 > --- a/arch/arm/plat-samsung/Makefile > +++ b/arch/arm/plat-samsung/Makefile > @@ -6,10 +6,6 @@ > > ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include > > -obj-y := > -obj-m := > -obj- := > - > # Objects we always build independent of SoC choice > > obj-y += init.o cpu.o > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada 2014-09-09 11:52 ` Nicolas Ferre @ 2014-09-09 16:23 ` Peter Foley 2014-09-23 14:56 ` Linus Walleij 2 siblings, 0 replies; 18+ messages in thread From: Peter Foley @ 2014-09-09 16:23 UTC (permalink / raw) To: Masahiro Yamada Cc: linux-kbuild, Andrew Victor, Nicolas Ferre, Jean-Christophe Plagniol-Villard, Russell King, Hartley Sweeten, Ryan Mallon, Kukjin Kim, Greg Ungerer, Ben Dooks, Linus Walleij, Tony Lindgren, linux-arm-kernel, LKML, linux-samsung-soc, linux-omap On Tue, Sep 9, 2014 at 6:26 AM, Masahiro Yamada <yamada.m@jp.panasonic.com> wrote: > Clearing obj-y, obj-m, obj-n, obj- in each Makefile is > a useless habit. > > They are non-exported variables; therefore they are always empty > whenever descending into each subdirectory. > (Moreorver, obj-y and obj-m are also set to empty at the beginning > of scripts/Makefile.build) > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Peter Foley <pefoley2@pefoley.com> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada 2014-09-09 11:52 ` Nicolas Ferre 2014-09-09 16:23 ` Peter Foley @ 2014-09-23 14:56 ` Linus Walleij 2 siblings, 0 replies; 18+ messages in thread From: Linus Walleij @ 2014-09-23 14:56 UTC (permalink / raw) To: Masahiro Yamada Cc: linux-kbuild, Andrew Victor, Nicolas Ferre, Jean-Christophe Plagniol-Villard, Russell King, Hartley Sweeten, Ryan Mallon, Kukjin Kim, Greg Ungerer, Ben Dooks, Tony Lindgren, linux-arm-kernel, linux-kernel, linux-samsung-soc, Linux-OMAP On Tue, Sep 9, 2014 at 12:26 PM, Masahiro Yamada <yamada.m@jp.panasonic.com> wrote: > Clearing obj-y, obj-m, obj-n, obj- in each Makefile is > a useless habit. > > They are non-exported variables; therefore they are always empty > whenever descending into each subdirectory. > (Moreorver, obj-y and obj-m are also set to empty at the beginning > of scripts/Makefile.build) > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 3/3] kbuild: remove obj-n and lib-n handling 2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada @ 2014-09-09 10:26 ` Masahiro Yamada 2014-09-09 16:20 ` Peter Foley ` (2 more replies) 2 siblings, 3 replies; 18+ messages in thread From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw) To: linux-kbuild; +Cc: Masahiro Yamada, Michal Marek, Sam Ravnborg, linux-kernel Kconfig never defines CONFIG_* as 'n'. Now obj-n is only used in firmware/Makefile and it can be replaced with obj-. No makefile uses lib-n. Let's rip off obj-n and lib-n. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> --- firmware/Makefile | 2 +- scripts/Makefile.build | 4 ++-- scripts/Makefile.clean | 4 +--- scripts/Makefile.fwinst | 2 +- 4 files changed, 5 insertions(+), 7 deletions(-) diff --git a/firmware/Makefile b/firmware/Makefile index 0862d34..e297e1b 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -232,6 +232,6 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ # Without this, built-in.o won't be created when it's empty, and the # final vmlinux link will fail. -obj-n := dummy +obj- := dummy hostprogs-y := ihex2fw diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 5b09d36..649ce68 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -79,11 +79,11 @@ endif # =========================================================================== -ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) +ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) lib-target := $(obj)/lib.a endif -ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) +ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) builtin-target := $(obj)/built-in.o endif diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index a651cee..c630ab5 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -23,15 +23,13 @@ __subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) subdir-y += $(__subdir-y) __subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) subdir-m += $(__subdir-m) -__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n))) -subdir-n += $(__subdir-n) __subdir- := $(patsubst %/,%,$(filter %/, $(obj-))) subdir- += $(__subdir-) # Subdirectories we need to descend into subdir-ym := $(sort $(subdir-y) $(subdir-m)) -subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-)) +subdir-ymn := $(sort $(subdir-ym) $(subdir-)) # Add subdir path diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index d8e335e..5b698ad 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -2,7 +2,7 @@ # Installing firmware # # We don't include the .config, so all firmware files are in $(fw-shipped-) -# rather than in $(fw-shipped-y) or $(fw-shipped-n). +# rather than in $(fw-shipped-y) or $(fw-shipped-m). # ========================================================================== INSTALL := install -- 1.9.1 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 3/3] kbuild: remove obj-n and lib-n handling 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada @ 2014-09-09 16:20 ` Peter Foley 2014-10-02 13:02 ` Michal Marek 2014-10-02 13:04 ` Michal Marek 2 siblings, 0 replies; 18+ messages in thread From: Peter Foley @ 2014-09-09 16:20 UTC (permalink / raw) To: Masahiro Yamada; +Cc: linux-kbuild, Michal Marek, Sam Ravnborg, LKML On Tue, Sep 9, 2014 at 6:26 AM, Masahiro Yamada <yamada.m@jp.panasonic.com> wrote: > Kconfig never defines CONFIG_* as 'n'. > Now obj-n is only used in firmware/Makefile and it can be > replaced with obj-. No makefile uses lib-n. > > Let's rip off obj-n and lib-n. > > Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Peter Foley <pefoley2@pefoley.com> ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 3/3] kbuild: remove obj-n and lib-n handling 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada 2014-09-09 16:20 ` Peter Foley @ 2014-10-02 13:02 ` Michal Marek 2014-10-02 13:04 ` Michal Marek 2 siblings, 0 replies; 18+ messages in thread From: Michal Marek @ 2014-10-02 13:02 UTC (permalink / raw) To: Masahiro Yamada; +Cc: linux-kbuild, Sam Ravnborg, linux-kernel On 2014-09-09 12:26, Masahiro Yamada wrote: > Kconfig never defines CONFIG_* as 'n'. > Now obj-n is only used in firmware/Makefile and it can be > replaced with obj-. No makefile uses lib-n. A possible usecase would be overriding CONFIG_ options on the commandline: make CONFIG_FOOBAR=n but CONFIG_FOOBAR= works as well. > Let's rip off obj-n and lib-n. Agreed, I applied your series to kbuild.git#kbuild now. Michal ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 3/3] kbuild: remove obj-n and lib-n handling 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada 2014-09-09 16:20 ` Peter Foley 2014-10-02 13:02 ` Michal Marek @ 2014-10-02 13:04 ` Michal Marek 2014-10-02 13:17 ` Masahiro Yamada 2 siblings, 1 reply; 18+ messages in thread From: Michal Marek @ 2014-10-02 13:04 UTC (permalink / raw) To: Masahiro Yamada; +Cc: linux-kbuild, Sam Ravnborg, linux-kernel On 2014-09-09 12:26, Masahiro Yamada wrote: > Kconfig never defines CONFIG_* as 'n'. > Now obj-n is only used in firmware/Makefile and it can be > replaced with obj-. No makefile uses lib-n. BTW, there are a few more instances of *-n, none of which seem useful: $ git --no-pager grep -e '[a-z]-n\>' -- '*Makefile*' '*Kbuild*' Makefile: $(init-n) $(init-) \ Makefile: $(core-n) $(core-) $(drivers-n) $(drivers-) \ Makefile: $(net-n) $(net-) $(libs-n) $(libs-)))) arch/arm/mach-ixp4xx/Makefile:obj-pci-n := arch/powerpc/boot/Makefile:initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) Michal ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 3/3] kbuild: remove obj-n and lib-n handling 2014-10-02 13:04 ` Michal Marek @ 2014-10-02 13:17 ` Masahiro Yamada 2014-10-02 13:33 ` [PATCH] kbuild: Do not reference *-n variables in the Makefile Michal Marek 0 siblings, 1 reply; 18+ messages in thread From: Masahiro Yamada @ 2014-10-02 13:17 UTC (permalink / raw) To: Michal Marek; +Cc: linux-kbuild, Sam Ravnborg, linux-kernel Hi Michal, On Thu, 02 Oct 2014 15:04:44 +0200 Michal Marek <mmarek@suse.cz> wrote: > On 2014-09-09 12:26, Masahiro Yamada wrote: > > Kconfig never defines CONFIG_* as 'n'. > > Now obj-n is only used in firmware/Makefile and it can be > > replaced with obj-. No makefile uses lib-n. > > BTW, there are a few more instances of *-n, none of which seem useful: > > $ git --no-pager grep -e '[a-z]-n\>' -- '*Makefile*' '*Kbuild*' > Makefile: $(init-n) $(init-) \ > Makefile: $(core-n) $(core-) $(drivers-n) $(drivers-) \ > Makefile: $(net-n) $(net-) $(libs-n) $(libs-)))) > arch/arm/mach-ixp4xx/Makefile:obj-pci-n := > arch/powerpc/boot/Makefile:initrd- := $(patsubst zImage%, > zImage.initrd%, $(image-n) $(image-)) Uh, I missed them. Anyway, it should be done in a separate patch even if we fix them. Can you fix them, please? (I do not want to steal what you found.) Simpler makefiles seem better. Best Regards Masahiro Yamada ^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH] kbuild: Do not reference *-n variables in the Makefile 2014-10-02 13:17 ` Masahiro Yamada @ 2014-10-02 13:33 ` Michal Marek 2014-10-02 13:35 ` Michal Marek 0 siblings, 1 reply; 18+ messages in thread From: Michal Marek @ 2014-10-02 13:33 UTC (permalink / raw) To: linux-kbuild; +Cc: sam, yamada.m, linux-kernel Kconfig options are either 'y', 'm', or undefined. Signed-off-by: Michal Marek <mmarek@suse.cz> --- Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Makefile b/Makefile index efbd2cb..106f300 100644 --- a/Makefile +++ b/Makefile @@ -868,9 +868,7 @@ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ $(net-y) $(net-m) $(libs-y) $(libs-m))) vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ - $(init-n) $(init-) \ - $(core-n) $(core-) $(drivers-n) $(drivers-) \ - $(net-n) $(net-) $(libs-n) $(libs-)))) + $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) init-y := $(patsubst %/, %/built-in.o, $(init-y)) core-y := $(patsubst %/, %/built-in.o, $(core-y)) -- 1.8.4.5 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH] kbuild: Do not reference *-n variables in the Makefile 2014-10-02 13:33 ` [PATCH] kbuild: Do not reference *-n variables in the Makefile Michal Marek @ 2014-10-02 13:35 ` Michal Marek 2014-10-02 13:55 ` Masahiro Yamada 0 siblings, 1 reply; 18+ messages in thread From: Michal Marek @ 2014-10-02 13:35 UTC (permalink / raw) To: linux-kbuild; +Cc: sam, yamada.m, linux-kernel On 2014-10-02 15:33, Michal Marek wrote: > Kconfig options are either 'y', 'm', or undefined. > > Signed-off-by: Michal Marek <mmarek@suse.cz> > --- > Makefile | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/Makefile b/Makefile > index efbd2cb..106f300 100644 > --- a/Makefile > +++ b/Makefile > @@ -868,9 +868,7 @@ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ > $(net-y) $(net-m) $(libs-y) $(libs-m))) > > vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ > - $(init-n) $(init-) \ > - $(core-n) $(core-) $(drivers-n) $(drivers-) \ > - $(net-n) $(net-) $(libs-n) $(libs-)))) > + $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) Actually, all the directories are hardcoded in {init,code,drivers,net,libs}-y; there are currently no Kconfig variables involved. But let's keep this generic and handle *-m and *- just in case. Michal ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH] kbuild: Do not reference *-n variables in the Makefile 2014-10-02 13:35 ` Michal Marek @ 2014-10-02 13:55 ` Masahiro Yamada 0 siblings, 0 replies; 18+ messages in thread From: Masahiro Yamada @ 2014-10-02 13:55 UTC (permalink / raw) To: Michal Marek; +Cc: linux-kbuild, sam, linux-kernel Hi Michal, On Thu, 02 Oct 2014 15:35:35 +0200 Michal Marek <mmarek@suse.cz> wrote: > On 2014-10-02 15:33, Michal Marek wrote: > > Kconfig options are either 'y', 'm', or undefined. > > > > Signed-off-by: Michal Marek <mmarek@suse.cz> > > --- > > Makefile | 4 +--- > > 1 file changed, 1 insertion(+), 3 deletions(-) > > > > diff --git a/Makefile b/Makefile > > index efbd2cb..106f300 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -868,9 +868,7 @@ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ > > $(net-y) $(net-m) $(libs-y) $(libs-m))) > > > > vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ > > - $(init-n) $(init-) \ > > - $(core-n) $(core-) $(drivers-n) $(drivers-) \ > > - $(net-n) $(net-) $(libs-n) $(libs-)))) > > + $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) > > Actually, all the directories are hardcoded in > {init,code,drivers,net,libs}-y; there are currently no Kconfig variables > involved. But let's keep this generic and handle *-m and *- just in case. > Agreed and thank you! Best Regards Masahiro Yamada ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2014-10-02 13:55 UTC | newest] Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada 2014-09-09 10:26 ` [PATCH 1/3] kbuild: remove unnecessary "obj- := dummy.o" trick Masahiro Yamada 2014-09-09 16:21 ` Peter Foley 2014-09-09 17:43 ` Mike Turquette 2014-09-09 23:45 ` Simon Horman 2014-09-10 3:40 ` David Miller 2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada 2014-09-09 11:52 ` Nicolas Ferre 2014-09-09 16:23 ` Peter Foley 2014-09-23 14:56 ` Linus Walleij 2014-09-09 10:26 ` [PATCH 3/3] kbuild: remove obj-n and lib-n handling Masahiro Yamada 2014-09-09 16:20 ` Peter Foley 2014-10-02 13:02 ` Michal Marek 2014-10-02 13:04 ` Michal Marek 2014-10-02 13:17 ` Masahiro Yamada 2014-10-02 13:33 ` [PATCH] kbuild: Do not reference *-n variables in the Makefile Michal Marek 2014-10-02 13:35 ` Michal Marek 2014-10-02 13:55 ` Masahiro Yamada
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).