From: c0d1n61at3@gmail.com (Jiunn Chang)
Subject: [Linux-kernel-mentees] [PATCH 2/2] cec-compliance: add/refactor tuner control tests
Date: Tue, 24 Sep 2019 09:17:52 -0500 [thread overview]
Message-ID: <20190924141752.5508-3-c0d1n61at3@gmail.com> (raw)
Message-ID: <20190924141752.AqdVcbIFP7bRUhPcdhbOzQH5YHZGycK-Dl2sFjp-bQM@z> (raw)
In-Reply-To: <20190924141752.5508-1-c0d1n61at3@gmail.com>
Tests added/refactored for new features added to the cec-follower.
Analog tuner control tests added/refactored:
- give analog tuner status
- select tuner analog service
- analog tuner step decrement
- analog tuner step increment
Signed-off-by: Jiunn Chang <c0d1n61at3 at gmail.com>
---
utils/cec-compliance/cec-test.cpp | 181 +++++++++++++++++++++++-------
1 file changed, 140 insertions(+), 41 deletions(-)
diff --git a/utils/cec-compliance/cec-test.cpp b/utils/cec-compliance/cec-test.cpp
index aece546c..91600d39 100644
--- a/utils/cec-compliance/cec-test.cpp
+++ b/utils/cec-compliance/cec-test.cpp
@@ -722,9 +722,19 @@ static struct remote_subtest deck_ctl_subtests[] = {
TODO: These are very rudimentary tests which should be expanded.
*/
-static int tuner_ctl_give_status(struct node *node, unsigned me, unsigned la, bool interactive)
+static int tuner_ctl_analog_give_status(struct node *node, unsigned me, unsigned la, bool interactive)
{
struct cec_msg msg = {};
+ struct cec_op_tuner_device_info info = {};
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_select_analogue_service(&msg, CEC_OP_ANA_BCAST_TYPE_CABLE,
+ 7668, CEC_OP_BCAST_SYSTEM_PAL_BG); // 479.25 MHz analog frequency
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
cec_msg_init(&msg, me, la);
cec_msg_give_tuner_device_status(&msg, true, CEC_OP_STATUS_REQ_ONCE);
@@ -737,6 +747,14 @@ static int tuner_ctl_give_status(struct node *node, unsigned me, unsigned la, bo
if (cec_msg_status_is_abort(&msg))
return PRESUMED_OK;
+ cec_ops_tuner_device_status(&msg, &info);
+ if (info.analog.ana_bcast_type != CEC_OP_ANA_BCAST_TYPE_CABLE)
+ return FAIL;
+ if (info.analog.ana_freq != 7668)
+ return FAIL;
+ if (info.analog.bcast_system != CEC_OP_BCAST_SYSTEM_PAL_BG)
+ return FAIL;
+
return 0;
}
@@ -745,23 +763,24 @@ static int tuner_ctl_sel_analog_service(struct node *node, unsigned me, unsigned
struct cec_msg msg = {};
node->remote[la].bcast_sys = ~0;
- for (unsigned sys = 0; sys <= 8; sys++) {
- cec_msg_init(&msg, me, la);
- cec_msg_select_analogue_service(&msg, CEC_OP_ANA_BCAST_TYPE_CABLE,
- 7668, sys); // 479.25 MHz analog frequency
- fail_on_test(!transmit_timeout(node, &msg));
- if (unrecognized_op(&msg))
- return NOTSUPPORTED;
- if (abort_reason(&msg) == CEC_OP_ABORT_INVALID_OP) {
- info("Tuner supports %s, but cannot select that service.\n",
- bcast_system2s(sys));
+ for (unsigned type = 0; type < 3; type++) {
+ for (unsigned sys = 0; sys < 9; sys++) {
+ cec_msg_init(&msg, me, la);
+ cec_msg_select_analogue_service(&msg, type, 7668, sys); // 479.25 MHz analog frequency
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (abort_reason(&msg) == CEC_OP_ABORT_INVALID_OP) {
+ info("Tuner supports %s, but cannot select that service.\n",
+ bcast_system2s(sys));
+ node->remote[la].bcast_sys = sys;
+ continue;
+ }
+ if (cec_msg_status_is_abort(&msg))
+ continue;
+ info("Tuner supports %s\n", bcast_system2s(sys));
node->remote[la].bcast_sys = sys;
- continue;
}
- if (cec_msg_status_is_abort(&msg))
- continue;
- info("Tuner supports %s\n", bcast_system2s(sys));
- node->remote[la].bcast_sys = sys;
}
if (node->remote[la].bcast_sys == (__u8)~0)
@@ -854,43 +873,123 @@ static int tuner_ctl_tuner_dev_status(struct node *node, unsigned me, unsigned l
return 0;
}
-static int tuner_ctl_step_dec(struct node *node, unsigned me, unsigned la, bool interactive)
+static int tuner_ctl_analog_step_dec(struct node *node, unsigned me, unsigned la, bool interactive)
{
struct cec_msg msg = {};
+ struct cec_op_tuner_device_info info = {};
+ __u16 freq = 0;
+
+ info.is_analog = true;
+ for (unsigned type = 0; type < 3; type++) {
+ for (unsigned sys = 0; sys < 9; sys++) {
+ cec_msg_init(&msg, me, la);
+ cec_msg_select_analogue_service(&msg, type, 16000, sys); // 1000 MHz analog frequency
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_give_tuner_device_status(&msg, true, CEC_OP_STATUS_REQ_ONCE);
+ fail_on_test(!transmit_timeout(node, &msg));
+ fail_on_test(timed_out(&msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ cec_ops_tuner_device_status(&msg, &info);
+ freq = info.analog.ana_freq;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_tuner_step_decrement(&msg);
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ if (cec_msg_status_is_abort(&msg))
+ return PRESUMED_OK;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_give_tuner_device_status(&msg, true, CEC_OP_STATUS_REQ_ONCE);
+ fail_on_test(!transmit_timeout(node, &msg));
+ fail_on_test(timed_out(&msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ cec_ops_tuner_device_status(&msg, &info);
+ if (!(info.analog.ana_freq < freq))
+ return FAIL;
+ }
+ }
- cec_msg_init(&msg, me, la);
- cec_msg_tuner_step_decrement(&msg);
- fail_on_test(!transmit_timeout(node, &msg));
- if (unrecognized_op(&msg))
- return NOTSUPPORTED;
- if (refused(&msg))
- return REFUSED;
-
- return PRESUMED_OK;
+ return 0;
}
-static int tuner_ctl_step_inc(struct node *node, unsigned me, unsigned la, bool interactive)
+static int tuner_ctl_analog_step_inc(struct node *node, unsigned me, unsigned la, bool interactive)
{
struct cec_msg msg = {};
+ struct cec_op_tuner_device_info info = {};
+ __u16 freq = 0;
+
+ info.is_analog = true;
+ for (unsigned type = 0; type < 3; type++) {
+ for (unsigned sys = 0; sys < 9; sys++) {
+ cec_msg_init(&msg, me, la);
+ cec_msg_select_analogue_service(&msg, type, 0, sys); // 0 MHz analog frequency
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_give_tuner_device_status(&msg, true, CEC_OP_STATUS_REQ_ONCE);
+ fail_on_test(!transmit_timeout(node, &msg));
+ fail_on_test(timed_out(&msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ cec_ops_tuner_device_status(&msg, &info);
+ freq = info.analog.ana_freq;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_tuner_step_increment(&msg);
+ fail_on_test(!transmit_timeout(node, &msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ if (cec_msg_status_is_abort(&msg))
+ return PRESUMED_OK;
+
+ cec_msg_init(&msg, me, la);
+ cec_msg_give_tuner_device_status(&msg, true, CEC_OP_STATUS_REQ_ONCE);
+ fail_on_test(!transmit_timeout(node, &msg));
+ fail_on_test(timed_out(&msg));
+ if (unrecognized_op(&msg))
+ return NOTSUPPORTED;
+ if (refused(&msg))
+ return REFUSED;
+ cec_ops_tuner_device_status(&msg, &info);
+ if (!(info.analog.ana_freq > freq))
+ return FAIL;
+ }
+ }
- cec_msg_init(&msg, me, la);
- cec_msg_tuner_step_increment(&msg);
- fail_on_test(!transmit_timeout(node, &msg));
- if (unrecognized_op(&msg))
- return NOTSUPPORTED;
- if (refused(&msg))
- return REFUSED;
-
- return PRESUMED_OK;
+ return 0;
}
static struct remote_subtest tuner_ctl_subtests[] = {
- { "Give Tuner Device Status", CEC_LOG_ADDR_MASK_TUNER, tuner_ctl_give_status },
- { "Select Analogue Service", CEC_LOG_ADDR_MASK_TUNER, tuner_ctl_sel_analog_service },
- { "Select Digital Service", CEC_LOG_ADDR_MASK_TUNER, tuner_ctl_sel_digital_service },
+ { "Give Tuner Device Status", CEC_LOG_ADDR_MASK_TUNER | CEC_LOG_ADDR_MASK_TV, tuner_ctl_analog_give_status },
+ { "Select Analogue Service", CEC_LOG_ADDR_MASK_TUNER | CEC_LOG_ADDR_MASK_TV, tuner_ctl_sel_analog_service },
+ { "Select Digital Service", CEC_LOG_ADDR_MASK_TUNER | CEC_LOG_ADDR_MASK_TV, tuner_ctl_sel_digital_service },
{ "Tuner Device Status", CEC_LOG_ADDR_MASK_ALL, tuner_ctl_tuner_dev_status },
- { "Tuner Step Decrement", CEC_LOG_ADDR_MASK_TUNER, tuner_ctl_step_dec },
- { "Tuner Step Increment", CEC_LOG_ADDR_MASK_TUNER, tuner_ctl_step_inc },
+ { "Tuner Analog Step Decrement", CEC_LOG_ADDR_MASK_TUNER | CEC_LOG_ADDR_MASK_TV, tuner_ctl_analog_step_dec },
+ { "Tuner Analog Step Increment", CEC_LOG_ADDR_MASK_TUNER | CEC_LOG_ADDR_MASK_TV, tuner_ctl_analog_step_inc },
};
--
2.23.0
next prev parent reply other threads:[~2019-09-24 14:17 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-24 14:17 [Linux-kernel-mentees] [PATCH 0/2] cec-compliance: tuner control c0d1n61at3
2019-09-24 14:17 ` Jiunn Chang
2019-09-24 14:17 ` [Linux-kernel-mentees] [PATCH 1/2] cec-follower: add tuner step increment/decrement c0d1n61at3
2019-09-24 14:17 ` Jiunn Chang
2019-09-24 15:20 ` hverkuil
2019-09-24 15:20 ` Hans Verkuil
2019-09-24 14:17 ` c0d1n61at3 [this message]
2019-09-24 14:17 ` [Linux-kernel-mentees] [PATCH 2/2] cec-compliance: add/refactor tuner control tests Jiunn Chang
2019-09-24 19:24 ` [Linux-kernel-mentees] [PATCH v2 0/2] cec-compliance: tuner control c0d1n61at3
2019-09-24 19:24 ` Jiunn Chang
2019-09-30 4:30 ` [Linux-kernel-mentees] [PATCH v3 0/3] " c0d1n61at3
2019-09-30 4:30 ` Jiunn Chang
2019-10-01 3:18 ` [Linux-kernel-mentees] [PATCH v4 " c0d1n61at3
2019-10-01 3:18 ` Jiunn Chang
2019-10-03 3:18 ` [Linux-kernel-mentees] [PATCH v5 0/2] " c0d1n61at3
2019-10-03 3:18 ` Jiunn Chang
2019-10-04 4:05 ` [Linux-kernel-mentees] [PATCH v6 0/1] " c0d1n61at3
2019-10-04 4:05 ` Jiunn Chang
2019-10-04 4:05 ` [Linux-kernel-mentees] [PATCH v6 1/1] Add test for new features in cec-follower c0d1n61at3
2019-10-04 4:05 ` Jiunn Chang
2019-10-03 3:18 ` [Linux-kernel-mentees] [PATCH v5 1/2] cec-follower: add tuner step increment/decrement c0d1n61at3
2019-10-03 3:18 ` Jiunn Chang
2019-10-03 3:18 ` [Linux-kernel-mentees] [PATCH v5 2/2] Add test for new features in cec-follower c0d1n61at3
2019-10-03 3:18 ` Jiunn Chang
2019-10-03 6:51 ` hverkuil
2019-10-03 6:51 ` Hans Verkuil
2019-10-01 3:18 ` [Linux-kernel-mentees] [PATCH v4 1/3] cec-follower: fix bugs for tuner emulation c0d1n61at3
2019-10-01 3:18 ` Jiunn Chang
2019-10-01 3:18 ` [Linux-kernel-mentees] [PATCH v4 2/3] cec-follower: add tuner step increment/decrement c0d1n61at3
2019-10-01 3:18 ` Jiunn Chang
2019-10-01 7:12 ` hverkuil
2019-10-01 7:12 ` Hans Verkuil
2019-10-01 3:18 ` [Linux-kernel-mentees] [PATCH v4 3/3] cec-compliance: add tuner control test c0d1n61at3
2019-10-01 3:18 ` Jiunn Chang
2019-10-01 7:51 ` hverkuil
2019-10-01 7:51 ` Hans Verkuil
2019-09-30 4:30 ` [Linux-kernel-mentees] [PATCH v3 1/3] cec-follower: fix bugs for tuner emulation c0d1n61at3
2019-09-30 4:30 ` Jiunn Chang
2019-09-30 9:12 ` hverkuil
2019-09-30 9:12 ` Hans Verkuil
2019-09-30 4:30 ` [Linux-kernel-mentees] [PATCH v3 2/3] cec-follower: add tuner step increment/decrement c0d1n61at3
2019-09-30 4:30 ` Jiunn Chang
2019-09-30 9:35 ` hverkuil
2019-09-30 9:35 ` Hans Verkuil
2019-09-30 4:30 ` [Linux-kernel-mentees] [PATCH v3 3/3] cec-compliance: refactor tuner control tests c0d1n61at3
2019-09-30 4:30 ` Jiunn Chang
2019-09-30 9:43 ` hverkuil
2019-09-30 9:43 ` Hans Verkuil
2019-09-24 19:24 ` [Linux-kernel-mentees] [PATCH v2 1/2] cec-follower: add tuner step increment/decrement c0d1n61at3
2019-09-24 19:24 ` Jiunn Chang
2019-09-24 19:31 ` skhan
2019-09-24 19:31 ` Shuah Khan
2019-09-25 6:54 ` hverkuil
2019-09-25 6:54 ` Hans Verkuil
2019-09-25 7:12 ` hverkuil
2019-09-25 7:12 ` Hans Verkuil
2019-09-24 19:24 ` [Linux-kernel-mentees] [PATCH v2 2/2] cec-compliance: add/refactor tuner control tests c0d1n61at3
2019-09-24 19:24 ` Jiunn Chang
2019-09-24 19:44 ` skhan
2019-09-24 19:44 ` Shuah Khan
2019-09-25 7:22 ` hverkuil
2019-09-25 7:22 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190924141752.5508-3-c0d1n61at3@gmail.com \
--to=c0d1n61at3@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).