linux-kernel-mentees.lists.linuxfoundation.org archive mirror
 help / color / mirror / Atom feed
From: Himadri Pandya <himadrispandya@gmail.com>
To: johan@kernel.org, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: linux-kernel-mentees@lists.linuxfoundation.org
Subject: [Linux-kernel-mentees] [PATCH 10/15] usb: serial: io_ti: use usb_control_msg_recv() and usb_control_msg_send()
Date: Wed,  4 Nov 2020 12:16:58 +0530	[thread overview]
Message-ID: <20201104064703.15123-11-himadrispandya@gmail.com> (raw)
In-Reply-To: <20201104064703.15123-1-himadrispandya@gmail.com>

The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly

Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
---
 drivers/usb/serial/io_ti.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c327d4cf7928..ab2370b80b3c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -260,16 +260,12 @@ static int ti_vread_sync(struct usb_device *dev, __u8 request,
 {
 	int status;
 
-	status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
-			(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
-			value, index, data, size, 1000);
-	if (status < 0)
+	status = usb_control_msg_recv(dev, 0, request, USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE | USB_DIR_IN, value,
+				      index, data, size, 1000, GFP_KERNEL);
+	if (status)
 		return status;
-	if (status != size) {
-		dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n",
-			__func__, size, status);
-		return -ECOMM;
-	}
+
 	return 0;
 }
 
@@ -278,16 +274,12 @@ static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value,
 {
 	int status;
 
-	status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
-			(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
-			value, index, data, size, timeout);
-	if (status < 0)
+	status = usb_control_msg_send(dev, 0, request, USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE | USB_DIR_OUT, value,
+				      index, data, size, timeout, GFP_KERNEL);
+	if (status)
 		return status;
-	if (status != size) {
-		dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n",
-			__func__, size, status);
-		return -ECOMM;
-	}
+
 	return 0;
 }
 
-- 
2.17.1

_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees

  parent reply	other threads:[~2020-11-04  6:48 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04  6:46 [Linux-kernel-mentees] [PATCH 00/15] usb: serial: avoid using usb_control_msg() directly Himadri Pandya
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 01/15] usb: serial: ark3116: use usb_control_msg_recv() and usb_control_msg_send() Himadri Pandya
2020-12-04  9:16   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 02/15] usb: serial: belkin_sa: use usb_control_msg_send() Himadri Pandya
2020-12-04  9:17   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 03/15] usb: serial: ch314: use usb_control_msg_recv() and usb_control_msg_send() Himadri Pandya
2020-12-04  9:24   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 04/15] usb: serial: cp210x: " Himadri Pandya
2020-12-04  9:34   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 05/15] usb: serial: cypress_m8: " Himadri Pandya
2020-12-04  9:37   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 06/15] usb: serial: f81232: " Himadri Pandya
2020-12-04  9:49   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 07/15] usb: serial: f81534: " Himadri Pandya
2020-12-04  9:55   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 08/15] usb: serial: ftdi_sio: " Himadri Pandya
2020-12-04 10:03   ` Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 09/15] usb: serial: io_edgeport: " Himadri Pandya
2020-12-04 10:10   ` Johan Hovold
2020-11-04  6:46 ` Himadri Pandya [this message]
2020-12-04 10:12   ` [Linux-kernel-mentees] [PATCH 10/15] usb: serial: io_ti: " Johan Hovold
2020-11-04  6:46 ` [Linux-kernel-mentees] [PATCH 11/15] usb: serial: ipaq: use usb_control_msg_send() Himadri Pandya
2020-12-04 10:21   ` Johan Hovold
2020-11-04  6:47 ` [Linux-kernel-mentees] [PATCH 12/15] usb: serial: ipw: " Himadri Pandya
2020-12-04 10:27   ` Johan Hovold
2020-11-04  6:47 ` [Linux-kernel-mentees] [PATCH 13/15] usb: serial: iuu_phoenix: " Himadri Pandya
2020-12-04 10:28   ` Johan Hovold
2020-11-04  6:47 ` [Linux-kernel-mentees] [PATCH 14/15] usb: serial: keyspan_pda: use usb_control_msg_recv() and usb_control_msg_send() Himadri Pandya
2020-12-04 10:31   ` Johan Hovold
2020-11-04  6:47 ` [Linux-kernel-mentees] [PATCH 15/15] usb: serial: kl5kusb105: " Himadri Pandya
2020-12-04 10:37   ` Johan Hovold
2020-11-06 10:43 ` [Linux-kernel-mentees] [PATCH 00/15] usb: serial: avoid using usb_control_msg() directly Greg KH
2020-12-04  9:09 ` Johan Hovold
2020-12-24 10:01   ` Himadri Pandya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201104064703.15123-11-himadrispandya@gmail.com \
    --to=himadrispandya@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).