[Linux-kernel-mentees] [PATCH 05/15] usb: serial: cypress_m8: use usb_control_msg_recv() and usb_control_msg_send()

[Himadri Pandya <himadrispandya@gmail.com>]

The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly.

Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
---
 drivers/usb/serial/cypress_m8.c | 38 +++++++++++++++++----------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index cc028601c388..4d66cab8eece 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -341,20 +341,21 @@ static int cypress_serial_control(struct tty_struct *tty,
 			feature_buffer[4]);
 
 		do {
-			retval = usb_control_msg(port->serial->dev,
-					usb_sndctrlpipe(port->serial->dev, 0),
-					HID_REQ_SET_REPORT,
-					USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
-					0x0300, 0, feature_buffer,
-					feature_len, 500);
+			retval = usb_control_msg_send(port->serial->dev, 0,
+						      HID_REQ_SET_REPORT,
+						      USB_DIR_OUT |
+						      USB_RECIP_INTERFACE |
+						      USB_TYPE_CLASS, 0x0300,
+						      0, feature_buffer,
+						      feature_len, 500,
+						      GFP_KERNEL);
 
 			if (tries++ >= 3)
 				break;
 
-		} while (retval != feature_len &&
-			 retval != -ENODEV);
+		} while (retval != -ENODEV);
 
-		if (retval != feature_len) {
+		if (retval) {
 			dev_err(dev, "%s - failed sending serial line settings - %d\n",
 				__func__, retval);
 			cypress_set_dead(port);
@@ -379,19 +380,20 @@ static int cypress_serial_control(struct tty_struct *tty,
 		}
 		dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
 		do {
-			retval = usb_control_msg(port->serial->dev,
-					usb_rcvctrlpipe(port->serial->dev, 0),
-					HID_REQ_GET_REPORT,
-					USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
-					0x0300, 0, feature_buffer,
-					feature_len, 500);
+			retval = usb_control_msg_recv(port->serial->dev, 0,
+						      HID_REQ_GET_REPORT,
+						      USB_DIR_IN |
+						      USB_RECIP_INTERFACE |
+						      USB_TYPE_CLASS, 0x0300,
+						      0, feature_buffer,
+						      feature_len, 500,
+						      GFP_KERNEL);
 
 			if (tries++ >= 3)
 				break;
-		} while (retval != feature_len
-						&& retval != -ENODEV);
+		} while (retval != -ENODEV);
 
-		if (retval != feature_len) {
+		if (retval) {
 			dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
 				__func__, retval);
 			cypress_set_dead(port);
-- 
2.17.1

_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees