* [PATCH V6 01/10] dt-bindings: remoteproc: convert imx rproc bindings to json-schema
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 02/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M support peng.fan
` (8 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Convert the imx rproc binding to DT schema format using json-schema.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
.../bindings/remoteproc/fsl,imx-rproc.yaml | 59 +++++++++++++++++++
.../bindings/remoteproc/imx-rproc.txt | 33 -----------
2 files changed, 59 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
delete mode 100644 Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
new file mode 100644
index 000000000000..bce6ccfe1538
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NXP iMX6SX/iMX7D Co-Processor Bindings
+
+description:
+ This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7d-cm4
+ - fsl,imx6sx-cm4
+
+ clocks:
+ description:
+ Clock for co-processor (See ../clock/clock-bindings.txt)
+
+ syscon:
+ description:
+ Phandle to syscon block which provide access to System Reset Controller
+
+ memory-region:
+ description:
+ list of phandels to the reserved memory regions.
+ (see ../reserved-memory/reserved-memory.txt)
+
+required:
+ - compatible
+ - clocks
+ - syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx7d-clock.h>
+ m4_reserved_sysmem1: cm4@80000000 {
+ reg = <0x80000000 0x80000>;
+ };
+
+ m4_reserved_sysmem2: cm4@81000000 {
+ reg = <0x81000000 0x80000>;
+ };
+
+ imx7d-cm4 {
+ compatible = "fsl,imx7d-cm4";
+ memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+ syscon = <&src>;
+ clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
deleted file mode 100644
index fbcefd965dc4..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP iMX6SX/iMX7D Co-Processor Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-NXP iMX SoCs.
-
-Required properties:
-- compatible Should be one of:
- "fsl,imx7d-cm4"
- "fsl,imx6sx-cm4"
-- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
-- syscon Phandle to syscon block which provide access to
- System Reset Controller
-
-Optional properties:
-- memory-region list of phandels to the reserved memory regions.
- (See: ../reserved-memory/reserved-memory.txt)
-
-Example:
- m4_reserved_sysmem1: cm4@80000000 {
- reg = <0x80000000 0x80000>;
- };
-
- m4_reserved_sysmem2: cm4@81000000 {
- reg = <0x81000000 0x80000>;
- };
-
- imx7d-cm4 {
- compatible = "fsl,imx7d-cm4";
- memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
- syscon = <&src>;
- clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
- };
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 02/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M support
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
2021-01-12 9:39 ` [PATCH V6 01/10] dt-bindings: remoteproc: convert imx rproc bindings to json-schema peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 03/10] remoteproc: introduce is_iomem to rproc_mem_entry peng.fan
` (7 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Add i.MX8MQ/M support, also include mailbox for rpmsg/virtio usage.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
.../bindings/remoteproc/fsl,imx-rproc.yaml | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index bce6ccfe1538..0b534ce227af 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -15,6 +15,8 @@ maintainers:
properties:
compatible:
enum:
+ - fsl,imx8mq-cm4
+ - fsl,imx8mm-cm4
- fsl,imx7d-cm4
- fsl,imx6sx-cm4
@@ -26,6 +28,20 @@ properties:
description:
Phandle to syscon block which provide access to System Reset Controller
+ mbox-names:
+ items:
+ - const: tx
+ - const: rx
+ - const: rxdb
+
+ mboxes:
+ description:
+ This property is required only if the rpmsg/virtio functionality is used.
+ List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
+ (see mailbox/fsl,mu.yaml)
+ minItems: 1
+ maxItems: 3
+
memory-region:
description:
list of phandels to the reserved memory regions.
@@ -56,4 +72,37 @@ examples:
clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
};
+ - |
+ #include <dt-bindings/clock/imx8mm-clock.h>
+ rsc_table: rsc_table@550ff000 {
+ no-map;
+ reg = <0x550ff000 0x1000>;
+ };
+
+ vdev0vring0: vdev0vring0@55000000 {
+ no-map;
+ reg = <0x55000000 0x8000>;
+ };
+
+ vdev0vring1: vdev0vring1@55008000 {
+ reg = <0x55008000 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@55400000 {
+ compatible = "shared-dma-pool";
+ reg = <0x55400000 0x100000>;
+ no-map;
+ };
+
+ imx8mm-cm4 {
+ compatible = "fsl,imx8mm-cm4";
+ clocks = <&clk IMX8MM_CLK_M4_DIV>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu 0 1
+ &mu 1 1
+ &mu 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+ syscon = <&src>;
+ };
...
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 03/10] remoteproc: introduce is_iomem to rproc_mem_entry
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
2021-01-12 9:39 ` [PATCH V6 01/10] dt-bindings: remoteproc: convert imx rproc bindings to json-schema peng.fan
2021-01-12 9:39 ` [PATCH V6 02/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M support peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 04/10] remoteproc: add is_iomem to da_to_va peng.fan
` (6 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Introduce is_iomem to indicate this piece memory is iomem or not.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
include/linux/remoteproc.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index f28ee75d1005..a5f6d2d9cde2 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -315,6 +315,7 @@ struct rproc;
/**
* struct rproc_mem_entry - memory entry descriptor
* @va: virtual address
+ * @is_iomem: io memory
* @dma: dma address
* @len: length, in bytes
* @da: device address
@@ -329,6 +330,7 @@ struct rproc;
*/
struct rproc_mem_entry {
void *va;
+ bool is_iomem;
dma_addr_t dma;
size_t len;
u32 da;
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 04/10] remoteproc: add is_iomem to da_to_va
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (2 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 03/10] remoteproc: introduce is_iomem to rproc_mem_entry peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 05/10] remoteproc: imx_rproc: correct err message peng.fan
` (5 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Introduce an extra parameter is_iomem to da_to_va, then the caller
could take the memory as normal memory or io mapped memory.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/remoteproc/imx_rproc.c | 2 +-
drivers/remoteproc/ingenic_rproc.c | 2 +-
drivers/remoteproc/keystone_remoteproc.c | 2 +-
drivers/remoteproc/mtk_scp.c | 6 +++---
drivers/remoteproc/omap_remoteproc.c | 2 +-
drivers/remoteproc/pru_rproc.c | 2 +-
drivers/remoteproc/qcom_q6v5_adsp.c | 2 +-
drivers/remoteproc/qcom_q6v5_pas.c | 2 +-
drivers/remoteproc/qcom_q6v5_wcss.c | 2 +-
drivers/remoteproc/qcom_wcnss.c | 2 +-
drivers/remoteproc/remoteproc_core.c | 7 +++++--
drivers/remoteproc/remoteproc_coredump.c | 8 ++++++--
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
drivers/remoteproc/remoteproc_elf_loader.c | 21 +++++++++++++++------
drivers/remoteproc/remoteproc_internal.h | 2 +-
drivers/remoteproc/st_slim_rproc.c | 2 +-
drivers/remoteproc/ti_k3_dsp_remoteproc.c | 2 +-
drivers/remoteproc/ti_k3_r5_remoteproc.c | 2 +-
drivers/remoteproc/wkup_m3_rproc.c | 2 +-
include/linux/remoteproc.h | 2 +-
20 files changed, 45 insertions(+), 29 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 8957ed271d20..6603e00bb6f4 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -208,7 +208,7 @@ static int imx_rproc_da_to_sys(struct imx_rproc *priv, u64 da,
return -ENOENT;
}
-static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct imx_rproc *priv = rproc->priv;
void *va = NULL;
diff --git a/drivers/remoteproc/ingenic_rproc.c b/drivers/remoteproc/ingenic_rproc.c
index 26e19e6143b7..bb5049295576 100644
--- a/drivers/remoteproc/ingenic_rproc.c
+++ b/drivers/remoteproc/ingenic_rproc.c
@@ -116,7 +116,7 @@ static void ingenic_rproc_kick(struct rproc *rproc, int vqid)
writel(vqid, vpu->aux_base + REG_CORE_MSG);
}
-static void *ingenic_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *ingenic_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct vpu *vpu = rproc->priv;
void __iomem *va = NULL;
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index cd266163a65f..54781f553f4e 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -246,7 +246,7 @@ static void keystone_rproc_kick(struct rproc *rproc, int vqid)
* can be used either by the remoteproc core for loading (when using kernel
* remoteproc loader), or by any rpmsg bus drivers.
*/
-static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct keystone_rproc *ksproc = rproc->priv;
void __iomem *va = NULL;
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index e0c235690361..535175f013e4 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -270,7 +270,7 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
}
/* grab the kernel address for this device address */
- ptr = (void __iomem *)rproc_da_to_va(rproc, da, memsz);
+ ptr = (void __iomem *)rproc_da_to_va(rproc, da, memsz, NULL);
if (!ptr) {
dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
ret = -EINVAL;
@@ -458,7 +458,7 @@ static int scp_start(struct rproc *rproc)
return ret;
}
-static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *scp_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct mtk_scp *scp = (struct mtk_scp *)rproc->priv;
int offset;
@@ -587,7 +587,7 @@ void *scp_mapping_dm_addr(struct mtk_scp *scp, u32 mem_addr)
{
void *ptr;
- ptr = scp_da_to_va(scp->rproc, mem_addr, 0);
+ ptr = scp_da_to_va(scp->rproc, mem_addr, 0, NULL);
if (!ptr)
return ERR_PTR(-EINVAL);
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index d94b7391bf9d..43531caa1959 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -728,7 +728,7 @@ static int omap_rproc_stop(struct rproc *rproc)
* Return: translated virtual address in kernel memory space on success,
* or NULL on failure.
*/
-static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct omap_rproc *oproc = rproc->priv;
int i;
diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 5fad787ba012..8df99318f18a 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -483,7 +483,7 @@ static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
* core for any PRU client drivers. The PRU Instruction RAM access is restricted
* only to the PRU loader code.
*/
-static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct pru_rproc *pru = rproc->priv;
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index e02450225e4a..8b0d8bbacd2e 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -281,7 +281,7 @@ static int adsp_stop(struct rproc *rproc)
return ret;
}
-static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int offset;
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index ee586226e438..333a1e389fcd 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -242,7 +242,7 @@ static int adsp_stop(struct rproc *rproc)
return ret;
}
-static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *adsp_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int offset;
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 78ebe1168b33..704cd63c9af4 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -410,7 +410,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
return 0;
}
-static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct q6v5_wcss *wcss = rproc->priv;
int offset;
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index f95854255c70..1bf60dc84f69 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -320,7 +320,7 @@ static int wcnss_stop(struct rproc *rproc)
return ret;
}
-static void *wcnss_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *wcnss_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
int offset;
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 2394eef383e3..9bec422ccce3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -189,13 +189,13 @@ EXPORT_SYMBOL(rproc_va_to_pa);
* here the output of the DMA API for the carveouts, which should be more
* correct.
*/
-void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct rproc_mem_entry *carveout;
void *ptr = NULL;
if (rproc->ops->da_to_va) {
- ptr = rproc->ops->da_to_va(rproc, da, len);
+ ptr = rproc->ops->da_to_va(rproc, da, len, is_iomem);
if (ptr)
goto out;
}
@@ -217,6 +217,9 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
ptr = carveout->va + offset;
+ if (is_iomem)
+ *is_iomem = carveout->is_iomem;
+
break;
}
diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
index 81ec154a6a5e..aee657cc08c6 100644
--- a/drivers/remoteproc/remoteproc_coredump.c
+++ b/drivers/remoteproc/remoteproc_coredump.c
@@ -153,18 +153,22 @@ static void rproc_copy_segment(struct rproc *rproc, void *dest,
size_t offset, size_t size)
{
void *ptr;
+ bool is_iomem;
if (segment->dump) {
segment->dump(rproc, segment, dest, offset, size);
} else {
- ptr = rproc_da_to_va(rproc, segment->da + offset, size);
+ ptr = rproc_da_to_va(rproc, segment->da + offset, size, &is_iomem);
if (!ptr) {
dev_err(&rproc->dev,
"invalid copy request for segment %pad with offset %zu and size %zu)\n",
&segment->da, offset, size);
memset(dest, 0xff, size);
} else {
- memcpy(dest, ptr, size);
+ if (is_iomem)
+ memcpy_fromio(dest, ptr, size);
+ else
+ memcpy(dest, ptr, size);
}
}
}
diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 7e5845376e9f..b5a1e3b697d9 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -132,7 +132,7 @@ static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf,
char buf[100];
int len;
- va = rproc_da_to_va(data->rproc, trace->da, trace->len);
+ va = rproc_da_to_va(data->rproc, trace->da, trace->len, NULL);
if (!va) {
len = scnprintf(buf, sizeof(buf), "Trace %s not available\n",
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index df68d87752e4..c02d4fec93a9 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -175,6 +175,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
u64 offset = elf_phdr_get_p_offset(class, phdr);
u32 type = elf_phdr_get_p_type(class, phdr);
void *ptr;
+ bool is_iomem;
if (type != PT_LOAD)
continue;
@@ -204,7 +205,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
}
/* grab the kernel address for this device address */
- ptr = rproc_da_to_va(rproc, da, memsz);
+ ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
if (!ptr) {
dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
memsz);
@@ -213,8 +214,12 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
}
/* put the segment where the remote processor expects it */
- if (filesz)
- memcpy(ptr, elf_data + offset, filesz);
+ if (filesz) {
+ if (is_iomem)
+ memcpy_fromio(ptr, elf_data + offset, filesz);
+ else
+ memcpy(ptr, elf_data + offset, filesz);
+ }
/*
* Zero out remaining memory for this segment.
@@ -223,8 +228,12 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
* did this for us. albeit harmless, we may consider removing
* this.
*/
- if (memsz > filesz)
- memset(ptr + filesz, 0, memsz - filesz);
+ if (memsz > filesz) {
+ if (is_iomem)
+ memset_io(ptr + filesz, 0, memsz - filesz);
+ else
+ memset(ptr + filesz, 0, memsz - filesz);
+ }
}
return ret;
@@ -377,6 +386,6 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
return NULL;
}
- return rproc_da_to_va(rproc, sh_addr, sh_size);
+ return rproc_da_to_va(rproc, sh_addr, sh_size, NULL);
}
EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table);
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c..9ea37aa687d2 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -84,7 +84,7 @@ static inline void rproc_char_device_remove(struct rproc *rproc)
void rproc_free_vring(struct rproc_vring *rvring);
int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
-void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len);
+void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem);
phys_addr_t rproc_va_to_pa(void *cpu_addr);
int rproc_trigger_recovery(struct rproc *rproc);
diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
index 09bcb4d8b9e0..22096adc1ad3 100644
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@@ -174,7 +174,7 @@ static int slim_rproc_stop(struct rproc *rproc)
return 0;
}
-static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct st_slim_rproc *slim_rproc = rproc->priv;
void *va = NULL;
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 863c0214e0a8..fd4eb67a6681 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -354,7 +354,7 @@ static int k3_dsp_rproc_stop(struct rproc *rproc)
* can be used either by the remoteproc core for loading (when using kernel
* remoteproc loader), or by any rpmsg bus drivers.
*/
-static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct k3_dsp_rproc *kproc = rproc->priv;
void __iomem *va = NULL;
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index 62b5a4c29456..5cf8d030a1f0 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -590,7 +590,7 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
* present in a DSP or IPU device). The translated addresses can be used
* either by the remoteproc core for loading, or by any rpmsg bus drivers.
*/
-static void *k3_r5_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *k3_r5_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct k3_r5_rproc *kproc = rproc->priv;
struct k3_r5_core *core = kproc->core;
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 92d387dfc03b..484f7605823e 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -89,7 +89,7 @@ static int wkup_m3_rproc_stop(struct rproc *rproc)
return error;
}
-static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
+static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
{
struct wkup_m3_rproc *wkupm3 = rproc->priv;
void *va = NULL;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index a5f6d2d9cde2..1b7d56c7a453 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -386,7 +386,7 @@ struct rproc_ops {
int (*stop)(struct rproc *rproc);
int (*attach)(struct rproc *rproc);
void (*kick)(struct rproc *rproc, int vqid);
- void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len);
+ void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len, bool *is_iomem);
int (*parse_fw)(struct rproc *rproc, const struct firmware *fw);
int (*handle_rsc)(struct rproc *rproc, u32 rsc_type, void *rsc,
int offset, int avail);
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 05/10] remoteproc: imx_rproc: correct err message
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (3 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 04/10] remoteproc: add is_iomem to da_to_va peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 18:47 ` Mathieu Poirier
2021-01-12 9:39 ` [PATCH V6 06/10] remoteproc: imx_rproc: use devm_ioremap peng.fan
` (4 subsequent siblings)
9 siblings, 1 reply; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
It is using devm_ioremap, so not devm_ioremap_resource. Correct
the error message and print out sa/size.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/remoteproc/imx_rproc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 6603e00bb6f4..2a093cea4997 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -268,7 +268,7 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
priv->mem[b].cpu_addr = devm_ioremap(&pdev->dev,
att->sa, att->size);
if (!priv->mem[b].cpu_addr) {
- dev_err(dev, "devm_ioremap_resource failed\n");
+ dev_err(dev, "failed to remap %#x bytes from %#x\n", att->size, att->sa);
return -ENOMEM;
}
priv->mem[b].sys_addr = att->sa;
@@ -298,7 +298,7 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
priv->mem[b].cpu_addr = devm_ioremap_resource(&pdev->dev, &res);
if (IS_ERR(priv->mem[b].cpu_addr)) {
- dev_err(dev, "devm_ioremap_resource failed\n");
+ dev_err(dev, "failed to remap %pr\n", &res);
err = PTR_ERR(priv->mem[b].cpu_addr);
return err;
}
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH V6 05/10] remoteproc: imx_rproc: correct err message
2021-01-12 9:39 ` [PATCH V6 05/10] remoteproc: imx_rproc: correct err message peng.fan
@ 2021-01-12 18:47 ` Mathieu Poirier
0 siblings, 0 replies; 17+ messages in thread
From: Mathieu Poirier @ 2021-01-12 18:47 UTC (permalink / raw)
To: peng.fan
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, linux-imx, linux-remoteproc, linux-arm-kernel,
linux-kernel, paul, matthias.bgg, agross, patrice.chotard
On Tue, Jan 12, 2021 at 05:39:14PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> It is using devm_ioremap, so not devm_ioremap_resource. Correct
> the error message and print out sa/size.
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
That was a finger problem on my side, no need to add my RB twice.
> ---
> drivers/remoteproc/imx_rproc.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 6603e00bb6f4..2a093cea4997 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -268,7 +268,7 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
> priv->mem[b].cpu_addr = devm_ioremap(&pdev->dev,
> att->sa, att->size);
> if (!priv->mem[b].cpu_addr) {
> - dev_err(dev, "devm_ioremap_resource failed\n");
> + dev_err(dev, "failed to remap %#x bytes from %#x\n", att->size, att->sa);
> return -ENOMEM;
> }
> priv->mem[b].sys_addr = att->sa;
> @@ -298,7 +298,7 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
>
> priv->mem[b].cpu_addr = devm_ioremap_resource(&pdev->dev, &res);
> if (IS_ERR(priv->mem[b].cpu_addr)) {
> - dev_err(dev, "devm_ioremap_resource failed\n");
> + dev_err(dev, "failed to remap %pr\n", &res);
> err = PTR_ERR(priv->mem[b].cpu_addr);
> return err;
> }
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH V6 06/10] remoteproc: imx_rproc: use devm_ioremap
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (4 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 05/10] remoteproc: imx_rproc: correct err message peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook peng.fan
` (3 subsequent siblings)
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
We might need to map an region multiple times, becaue the region might
be shared between remote processors, such i.MX8QM with dual M4 cores.
So use devm_ioremap, not devm_ioremap_resource.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/remoteproc/imx_rproc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 2a093cea4997..47fc1d06be6a 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -296,7 +296,8 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
if (b >= IMX7D_RPROC_MEM_MAX)
break;
- priv->mem[b].cpu_addr = devm_ioremap_resource(&pdev->dev, &res);
+ /* Not use resource version, because we might share region */
+ priv->mem[b].cpu_addr = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
if (IS_ERR(priv->mem[b].cpu_addr)) {
dev_err(dev, "failed to remap %pr\n", &res);
err = PTR_ERR(priv->mem[b].cpu_addr);
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (5 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 06/10] remoteproc: imx_rproc: use devm_ioremap peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-14 21:38 ` Mathieu Poirier
2021-01-12 9:39 ` [PATCH V6 08/10] remoteproc: imx_rproc: support i.MX8MQ/M peng.fan
` (2 subsequent siblings)
9 siblings, 1 reply; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
The hook is used to parse memory-regions and load resource table
from the address the remote processor published.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/remoteproc/imx_rproc.c | 93 ++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 47fc1d06be6a..3c0075dc1787 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -10,6 +10,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -241,10 +242,102 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *i
return va;
}
+static int imx_rproc_mem_alloc(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ struct device *dev = rproc->dev.parent;
+ void *va;
+
+ dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
+ va = ioremap_wc(mem->dma, mem->len);
+ if (IS_ERR_OR_NULL(va)) {
+ dev_err(dev, "Unable to map memory region: %p+%zx\n",
+ &mem->dma, mem->len);
+ return -ENOMEM;
+ }
+
+ /* Update memory entry va */
+ mem->va = va;
+
+ return 0;
+}
+
+static int imx_rproc_mem_release(struct rproc *rproc,
+ struct rproc_mem_entry *mem)
+{
+ dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
+ iounmap(mem->va);
+
+ return 0;
+}
+
+static int imx_rproc_parse_memory_regions(struct rproc *rproc)
+{
+ struct imx_rproc *priv = rproc->priv;
+ struct device_node *np = priv->dev->of_node;
+ struct of_phandle_iterator it;
+ struct rproc_mem_entry *mem;
+ struct reserved_mem *rmem;
+ u32 da;
+
+ /* Register associated reserved memory regions */
+ of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+ while (of_phandle_iterator_next(&it) == 0) {
+ /*
+ * Ignore the first memory region which will be used vdev buffer.
+ * No need to do extra handlings, rproc_add_virtio_dev will handle it.
+ */
+ if (!strcmp(it.node->name, "vdevbuffer"))
+ continue;
+
+ rmem = of_reserved_mem_lookup(it.node);
+ if (!rmem) {
+ dev_err(priv->dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ /* No need to translate pa to da, i.MX use same map */
+ da = rmem->base;
+
+ /* Register memory region */
+ mem = rproc_mem_entry_init(priv->dev, NULL, (dma_addr_t)rmem->base, rmem->size, da,
+ imx_rproc_mem_alloc, imx_rproc_mem_release,
+ it.node->name);
+
+ if (mem)
+ rproc_coredump_add_segment(rproc, da, rmem->size);
+ else
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ }
+
+ return 0;
+}
+
+static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ int ret = imx_rproc_parse_memory_regions(rproc);
+
+ if (ret)
+ return ret;
+
+ ret = rproc_elf_load_rsc_table(rproc, fw);
+ if (ret)
+ dev_info(&rproc->dev, "No resource table in elf\n");
+
+ return 0;
+}
+
static const struct rproc_ops imx_rproc_ops = {
.start = imx_rproc_start,
.stop = imx_rproc_stop,
.da_to_va = imx_rproc_da_to_va,
+ .load = rproc_elf_load_segments,
+ .parse_fw = imx_rproc_parse_fw,
+ .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
+ .sanity_check = rproc_elf_sanity_check,
+ .get_boot_addr = rproc_elf_get_boot_addr,
};
static int imx_rproc_addr_init(struct imx_rproc *priv,
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
2021-01-12 9:39 ` [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook peng.fan
@ 2021-01-14 21:38 ` Mathieu Poirier
2021-01-15 3:28 ` Peng Fan
0 siblings, 1 reply; 17+ messages in thread
From: Mathieu Poirier @ 2021-01-14 21:38 UTC (permalink / raw)
To: peng.fan
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, linux-imx, linux-remoteproc, linux-arm-kernel,
linux-kernel, paul, matthias.bgg, agross, patrice.chotard
On Tue, Jan 12, 2021 at 05:39:16PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> The hook is used to parse memory-regions and load resource table
> from the address the remote processor published.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
> drivers/remoteproc/imx_rproc.c | 93 ++++++++++++++++++++++++++++++++++
> 1 file changed, 93 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 47fc1d06be6a..3c0075dc1787 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -10,6 +10,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -241,10 +242,102 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *i
> return va;
> }
>
> +static int imx_rproc_mem_alloc(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + struct device *dev = rproc->dev.parent;
> + void *va;
> +
> + dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> + va = ioremap_wc(mem->dma, mem->len);
> + if (IS_ERR_OR_NULL(va)) {
> + dev_err(dev, "Unable to map memory region: %p+%zx\n",
> + &mem->dma, mem->len);
> + return -ENOMEM;
> + }
> +
> + /* Update memory entry va */
> + mem->va = va;
> +
> + return 0;
> +}
> +
> +static int imx_rproc_mem_release(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> + iounmap(mem->va);
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_memory_regions(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + struct device_node *np = priv->dev->of_node;
> + struct of_phandle_iterator it;
> + struct rproc_mem_entry *mem;
> + struct reserved_mem *rmem;
> + u32 da;
> +
> + /* Register associated reserved memory regions */
> + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> + while (of_phandle_iterator_next(&it) == 0) {
> + /*
> + * Ignore the first memory region which will be used vdev buffer.
> + * No need to do extra handlings, rproc_add_virtio_dev will handle it.
> + */
> + if (!strcmp(it.node->name, "vdevbuffer"))
Because you are doing a V8, please use "vdev0buffer" and make the change in the
.yaml file.
> + continue;
> +
> + rmem = of_reserved_mem_lookup(it.node);
> + if (!rmem) {
> + dev_err(priv->dev, "unable to acquire memory-region\n");
> + return -EINVAL;
> + }
> +
> + /* No need to translate pa to da, i.MX use same map */
> + da = rmem->base;
> +
> + /* Register memory region */
> + mem = rproc_mem_entry_init(priv->dev, NULL, (dma_addr_t)rmem->base, rmem->size, da,
> + imx_rproc_mem_alloc, imx_rproc_mem_release,
> + it.node->name);
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da, rmem->size);
> + else
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + }
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> +{
> + int ret = imx_rproc_parse_memory_regions(rproc);
> +
> + if (ret)
> + return ret;
> +
> + ret = rproc_elf_load_rsc_table(rproc, fw);
> + if (ret)
> + dev_info(&rproc->dev, "No resource table in elf\n");
> +
> + return 0;
> +}
> +
> static const struct rproc_ops imx_rproc_ops = {
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> .da_to_va = imx_rproc_da_to_va,
> + .load = rproc_elf_load_segments,
> + .parse_fw = imx_rproc_parse_fw,
> + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> + .sanity_check = rproc_elf_sanity_check,
> + .get_boot_addr = rproc_elf_get_boot_addr,
> };
>
> static int imx_rproc_addr_init(struct imx_rproc *priv,
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
2021-01-14 21:38 ` Mathieu Poirier
@ 2021-01-15 3:28 ` Peng Fan
0 siblings, 0 replies; 17+ messages in thread
From: Peng Fan @ 2021-01-15 3:28 UTC (permalink / raw)
To: Mathieu Poirier
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, dl-linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard
> Subject: Re: [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific
> parse fw hook
>
> On Tue, Jan 12, 2021 at 05:39:16PM +0800, peng.fan@nxp.com wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > The hook is used to parse memory-regions and load resource table from
> > the address the remote processor published.
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> > ---
> > drivers/remoteproc/imx_rproc.c | 93
> > ++++++++++++++++++++++++++++++++++
> > 1 file changed, 93 insertions(+)
> >
> > diff --git a/drivers/remoteproc/imx_rproc.c
> > b/drivers/remoteproc/imx_rproc.c index 47fc1d06be6a..3c0075dc1787
> > 100644
> > --- a/drivers/remoteproc/imx_rproc.c
> > +++ b/drivers/remoteproc/imx_rproc.c
> > @@ -10,6 +10,7 @@
> > #include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > #include <linux/of_address.h>
> > +#include <linux/of_reserved_mem.h>
> > #include <linux/of_device.h>
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > @@ -241,10 +242,102 @@ static void *imx_rproc_da_to_va(struct rproc
> *rproc, u64 da, size_t len, bool *i
> > return va;
> > }
> >
> > +static int imx_rproc_mem_alloc(struct rproc *rproc,
> > + struct rproc_mem_entry *mem) {
> > + struct device *dev = rproc->dev.parent;
> > + void *va;
> > +
> > + dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> > + va = ioremap_wc(mem->dma, mem->len);
> > + if (IS_ERR_OR_NULL(va)) {
> > + dev_err(dev, "Unable to map memory region: %p+%zx\n",
> > + &mem->dma, mem->len);
> > + return -ENOMEM;
> > + }
> > +
> > + /* Update memory entry va */
> > + mem->va = va;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_rproc_mem_release(struct rproc *rproc,
> > + struct rproc_mem_entry *mem)
> > +{
> > + dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> > + iounmap(mem->va);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_rproc_parse_memory_regions(struct rproc *rproc) {
> > + struct imx_rproc *priv = rproc->priv;
> > + struct device_node *np = priv->dev->of_node;
> > + struct of_phandle_iterator it;
> > + struct rproc_mem_entry *mem;
> > + struct reserved_mem *rmem;
> > + u32 da;
> > +
> > + /* Register associated reserved memory regions */
> > + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> > + while (of_phandle_iterator_next(&it) == 0) {
> > + /*
> > + * Ignore the first memory region which will be used vdev buffer.
> > + * No need to do extra handlings, rproc_add_virtio_dev will handle
> it.
> > + */
> > + if (!strcmp(it.node->name, "vdevbuffer"))
>
> Because you are doing a V8, please use "vdev0buffer" and make the change in
> the .yaml file.
V7, I have not post out V7 yet.
Seems I forgot the change this to vdev0buffer, I recalled you have same comments
before.
Thanks,
Peng.
>
> > + continue;
> > +
> > + rmem = of_reserved_mem_lookup(it.node);
> > + if (!rmem) {
> > + dev_err(priv->dev, "unable to acquire memory-region\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* No need to translate pa to da, i.MX use same map */
> > + da = rmem->base;
> > +
> > + /* Register memory region */
> > + mem = rproc_mem_entry_init(priv->dev, NULL,
> (dma_addr_t)rmem->base, rmem->size, da,
> > + imx_rproc_mem_alloc, imx_rproc_mem_release,
> > + it.node->name);
> > +
> > + if (mem)
> > + rproc_coredump_add_segment(rproc, da, rmem->size);
> > + else
> > + return -ENOMEM;
> > +
> > + rproc_add_carveout(rproc, mem);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_rproc_parse_fw(struct rproc *rproc, const struct
> > +firmware *fw) {
> > + int ret = imx_rproc_parse_memory_regions(rproc);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + ret = rproc_elf_load_rsc_table(rproc, fw);
> > + if (ret)
> > + dev_info(&rproc->dev, "No resource table in elf\n");
> > +
> > + return 0;
> > +}
> > +
> > static const struct rproc_ops imx_rproc_ops = {
> > .start = imx_rproc_start,
> > .stop = imx_rproc_stop,
> > .da_to_va = imx_rproc_da_to_va,
> > + .load = rproc_elf_load_segments,
> > + .parse_fw = imx_rproc_parse_fw,
> > + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> > + .sanity_check = rproc_elf_sanity_check,
> > + .get_boot_addr = rproc_elf_get_boot_addr,
> > };
> >
> > static int imx_rproc_addr_init(struct imx_rproc *priv,
> > --
> > 2.28.0
> >
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH V6 08/10] remoteproc: imx_rproc: support i.MX8MQ/M
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (6 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-12 9:39 ` [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions peng.fan
2021-01-12 9:39 ` [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox peng.fan
9 siblings, 0 replies; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Add i.MX8MQ dev/sys addr map and configuration data structure
i.MX8MM share i.MX8MQ settings.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
drivers/remoteproc/imx_rproc.c | 39 ++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 3c0075dc1787..f80428afb8a7 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -88,6 +88,34 @@ struct imx_rproc {
struct clk *clk;
};
+static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
+ /* dev addr , sys addr , size , flags */
+ /* TCML - alias */
+ { 0x00000000, 0x007e0000, 0x00020000, 0 },
+ /* OCRAM_S */
+ { 0x00180000, 0x00180000, 0x00008000, 0 },
+ /* OCRAM */
+ { 0x00900000, 0x00900000, 0x00020000, 0 },
+ /* OCRAM */
+ { 0x00920000, 0x00920000, 0x00020000, 0 },
+ /* QSPI Code - alias */
+ { 0x08000000, 0x08000000, 0x08000000, 0 },
+ /* DDR (Code) - alias */
+ { 0x10000000, 0x80000000, 0x0FFE0000, 0 },
+ /* TCML */
+ { 0x1FFE0000, 0x007E0000, 0x00020000, ATT_OWN },
+ /* TCMU */
+ { 0x20000000, 0x00800000, 0x00020000, ATT_OWN },
+ /* OCRAM_S */
+ { 0x20180000, 0x00180000, 0x00008000, ATT_OWN },
+ /* OCRAM */
+ { 0x20200000, 0x00900000, 0x00020000, ATT_OWN },
+ /* OCRAM */
+ { 0x20220000, 0x00920000, 0x00020000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x40000000, 0x40000000, 0x80000000, 0 },
+};
+
static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
/* dev addr , sys addr , size , flags */
/* OCRAM_S (M4 Boot code) - alias */
@@ -138,6 +166,15 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
{ 0x80000000, 0x80000000, 0x60000000, 0 },
};
+static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
+ .src_reg = IMX7D_SRC_SCR,
+ .src_mask = IMX7D_M4_RST_MASK,
+ .src_start = IMX7D_M4_START,
+ .src_stop = IMX7D_M4_STOP,
+ .att = imx_rproc_att_imx8mq,
+ .att_size = ARRAY_SIZE(imx_rproc_att_imx8mq),
+};
+
static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
.src_reg = IMX7D_SRC_SCR,
.src_mask = IMX7D_M4_RST_MASK,
@@ -496,6 +533,8 @@ static int imx_rproc_remove(struct platform_device *pdev)
static const struct of_device_id imx_rproc_of_match[] = {
{ .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
+ { .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
+ { .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
{},
};
MODULE_DEVICE_TABLE(of, imx_rproc_of_match);
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (7 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 08/10] remoteproc: imx_rproc: support i.MX8MQ/M peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-14 20:54 ` Mathieu Poirier
2021-01-12 9:39 ` [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox peng.fan
9 siblings, 1 reply; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar.
They are handled by remoteproc common code, no need to map in imx
rproc driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/remoteproc/imx_rproc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index f80428afb8a7..e62a53ee128e 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -417,6 +417,9 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
struct resource res;
node = of_parse_phandle(np, "memory-region", a);
+ /* Not map vdev region */
+ if (!strcmp(node->name, "vdev"))
+ continue;
err = of_address_to_resource(node, 0, &res);
if (err) {
dev_err(dev, "unable to resolve memory region\n");
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions
2021-01-12 9:39 ` [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions peng.fan
@ 2021-01-14 20:54 ` Mathieu Poirier
0 siblings, 0 replies; 17+ messages in thread
From: Mathieu Poirier @ 2021-01-14 20:54 UTC (permalink / raw)
To: peng.fan
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, linux-imx, linux-remoteproc, linux-arm-kernel,
linux-kernel, paul, matthias.bgg, agross, patrice.chotard
On Tue, Jan 12, 2021 at 05:39:18PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar.
> They are handled by remoteproc common code, no need to map in imx
> rproc driver.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index f80428afb8a7..e62a53ee128e 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -417,6 +417,9 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
> struct resource res;
>
> node = of_parse_phandle(np, "memory-region", a);
> + /* Not map vdev region */
> + if (!strcmp(node->name, "vdev"))
> + continue;
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> err = of_address_to_resource(node, 0, &res);
> if (err) {
> dev_err(dev, "unable to resolve memory region\n");
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
2021-01-12 9:39 [PATCH V6 00/10] remoteproc: imx_rproc: support iMX8MQ/M peng.fan
` (8 preceding siblings ...)
2021-01-12 9:39 ` [PATCH V6 09/10] remoteproc: imx_rproc: ignore mapping vdev regions peng.fan
@ 2021-01-12 9:39 ` peng.fan
2021-01-14 21:36 ` Mathieu Poirier
9 siblings, 1 reply; 17+ messages in thread
From: peng.fan @ 2021-01-12 9:39 UTC (permalink / raw)
To: ohad, bjorn.andersson, mathieu.poirier, o.rempel, robh+dt
Cc: shawnguo, s.hauer, kernel, festevam, linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Use virtio/mailbox to build connection between Remote Proccessors
and Linux. Add work queue to handle incoming messages.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/remoteproc/imx_rproc.c | 115 ++++++++++++++++++++++++++++++++-
1 file changed, 112 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index e62a53ee128e..812b077f1282 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -7,6 +7,7 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -15,6 +16,9 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
+#include <linux/workqueue.h>
+
+#include "remoteproc_internal.h"
#define IMX7D_SRC_SCR 0x0C
#define IMX7D_ENABLE_M4 BIT(3)
@@ -86,6 +90,11 @@ struct imx_rproc {
const struct imx_rproc_dcfg *dcfg;
struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
struct clk *clk;
+ struct mbox_client cl;
+ struct mbox_chan *tx_ch;
+ struct mbox_chan *rx_ch;
+ struct work_struct rproc_work;
+ struct workqueue_struct *workqueue;
};
static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
@@ -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
return 0;
}
+static void imx_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct imx_rproc *priv = rproc->priv;
+ int err;
+ __u32 mmsg;
+
+ if (!priv->tx_ch) {
+ dev_err(priv->dev, "No initialized mbox tx channel\n");
+ return;
+ }
+
+ /*
+ * Send the index of the triggered virtqueue as the mu payload.
+ * Let remote processor know which virtqueue is used.
+ */
+ mmsg = vqid << 16;
+
+ err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (err < 0)
+ dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
+ __func__, vqid, err);
+}
+
static const struct rproc_ops imx_rproc_ops = {
.start = imx_rproc_start,
.stop = imx_rproc_stop,
+ .kick = imx_rproc_kick,
.da_to_va = imx_rproc_da_to_va,
.load = rproc_elf_load_segments,
.parse_fw = imx_rproc_parse_fw,
@@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
return 0;
}
+static void imx_rproc_vq_work(struct work_struct *work)
+{
+ struct imx_rproc *priv = container_of(work, struct imx_rproc,
+ rproc_work);
+
+ rproc_vq_interrupt(priv->rproc, 0);
+ rproc_vq_interrupt(priv->rproc, 1);
+}
+
+static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_rproc *priv = rproc->priv;
+
+ queue_work(priv->workqueue, &priv->rproc_work);
+}
+
+static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
+{
+ struct imx_rproc *priv = rproc->priv;
+ struct device *dev = priv->dev;
+ struct mbox_client *cl;
+ int ret;
+
+ if (!of_get_property(dev->of_node, "mbox-names", NULL))
+ return 0;
+
+ cl = &priv->cl;
+ cl->dev = dev;
+ cl->tx_block = true;
+ cl->tx_tout = 100;
+ cl->knows_txdone = false;
+ cl->rx_callback = imx_rproc_rx_callback;
+
+ priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(priv->tx_ch)) {
+ ret = PTR_ERR(priv->tx_ch);
+ return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
+ "failed to request tx mailbox channel: %d\n", ret);
+ }
+
+ priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(priv->rx_ch)) {
+ mbox_free_channel(priv->tx_ch);
+ return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
+ "failed to request mbox tx chan\n");
+ }
+
+ return 0;
+}
+
+static void imx_rproc_free_mbox(struct rproc *rproc)
+{
+ struct imx_rproc *priv = rproc->priv;
+
+ mbox_free_channel(priv->tx_ch);
+ mbox_free_channel(priv->rx_ch);
+}
+
static int imx_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -481,18 +573,28 @@ static int imx_rproc_probe(struct platform_device *pdev)
priv->dev = dev;
dev_set_drvdata(dev, rproc);
+ priv->workqueue = create_workqueue(dev_name(dev));
+ if (!priv->workqueue) {
+ dev_err(dev, "cannot create workqueue\n");
+ ret = -ENOMEM;
+ goto err_put_rproc;
+ }
+
+ ret = imx_rproc_xtr_mbox_init(rproc);
+ if (ret)
+ goto err_put_wkq;
ret = imx_rproc_addr_init(priv, pdev);
if (ret) {
dev_err(dev, "failed on imx_rproc_addr_init\n");
- goto err_put_rproc;
+ goto err_put_mbox;
}
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(dev, "Failed to get clock\n");
ret = PTR_ERR(priv->clk);
- goto err_put_rproc;
+ goto err_put_mbox;
}
/*
@@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(&rproc->dev, "Failed to enable clock\n");
- goto err_put_rproc;
+ goto err_put_mbox;
}
+ INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
+
ret = rproc_add(rproc);
if (ret) {
dev_err(dev, "rproc_add failed\n");
@@ -515,6 +619,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
err_put_clk:
clk_disable_unprepare(priv->clk);
+err_put_mbox:
+ imx_rproc_free_mbox(rproc);
+err_put_wkq:
+ destroy_workqueue(priv->workqueue);
err_put_rproc:
rproc_free(rproc);
@@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
struct imx_rproc *priv = rproc->priv;
clk_disable_unprepare(priv->clk);
+ imx_rproc_free_mbox(rproc);
rproc_del(rproc);
rproc_free(rproc);
--
2.28.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
2021-01-12 9:39 ` [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox peng.fan
@ 2021-01-14 21:36 ` Mathieu Poirier
2021-01-15 3:27 ` Peng Fan
0 siblings, 1 reply; 17+ messages in thread
From: Mathieu Poirier @ 2021-01-14 21:36 UTC (permalink / raw)
To: peng.fan
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, linux-imx, linux-remoteproc, linux-arm-kernel,
linux-kernel, paul, matthias.bgg, agross, patrice.chotard
On Tue, Jan 12, 2021 at 05:39:19PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Use virtio/mailbox to build connection between Remote Proccessors
> and Linux. Add work queue to handle incoming messages.
>
> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 115 ++++++++++++++++++++++++++++++++-
> 1 file changed, 112 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index e62a53ee128e..812b077f1282 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -7,6 +7,7 @@
> #include <linux/err.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> @@ -15,6 +16,9 @@
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/remoteproc.h>
> +#include <linux/workqueue.h>
> +
> +#include "remoteproc_internal.h"
>
> #define IMX7D_SRC_SCR 0x0C
> #define IMX7D_ENABLE_M4 BIT(3)
> @@ -86,6 +90,11 @@ struct imx_rproc {
> const struct imx_rproc_dcfg *dcfg;
> struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
> struct clk *clk;
> + struct mbox_client cl;
> + struct mbox_chan *tx_ch;
> + struct mbox_chan *rx_ch;
> + struct work_struct rproc_work;
> + struct workqueue_struct *workqueue;
> };
>
> static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
> @@ -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> return 0;
> }
>
> +static void imx_rproc_kick(struct rproc *rproc, int vqid)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + int err;
> + __u32 mmsg;
> +
> + if (!priv->tx_ch) {
> + dev_err(priv->dev, "No initialized mbox tx channel\n");
> + return;
> + }
> +
> + /*
> + * Send the index of the triggered virtqueue as the mu payload.
> + * Let remote processor know which virtqueue is used.
> + */
> + mmsg = vqid << 16;
> +
> + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (err < 0)
> + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> + __func__, vqid, err);
> +}
> +
> static const struct rproc_ops imx_rproc_ops = {
> .start = imx_rproc_start,
> .stop = imx_rproc_stop,
> + .kick = imx_rproc_kick,
> .da_to_va = imx_rproc_da_to_va,
> .load = rproc_elf_load_segments,
> .parse_fw = imx_rproc_parse_fw,
> @@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
> return 0;
> }
>
> +static void imx_rproc_vq_work(struct work_struct *work)
> +{
> + struct imx_rproc *priv = container_of(work, struct imx_rproc,
> + rproc_work);
> +
> + rproc_vq_interrupt(priv->rproc, 0);
> + rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_rproc *priv = rproc->priv;
> +
> + queue_work(priv->workqueue, &priv->rproc_work);
> +}
> +
> +static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + struct device *dev = priv->dev;
> + struct mbox_client *cl;
> + int ret;
> +
> + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> + return 0;
> +
> + cl = &priv->cl;
> + cl->dev = dev;
> + cl->tx_block = true;
> + cl->tx_tout = 100;
> + cl->knows_txdone = false;
> + cl->rx_callback = imx_rproc_rx_callback;
> +
> + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> + if (IS_ERR(priv->tx_ch)) {
> + ret = PTR_ERR(priv->tx_ch);
> + return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
> + "failed to request tx mailbox channel: %d\n", ret);
return dev_err_probe(cl->dev, ret,
"failed to request tx mailbox channel: %d\n", ret);
> + }
> +
> + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> + if (IS_ERR(priv->rx_ch)) {
> + mbox_free_channel(priv->tx_ch);
> + return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
> + "failed to request mbox tx chan\n");
ret = PTR_ERR(priv->rx_ch);
return dev_err_probe(cl->dev, ret,
"failed to request rx mailbox channel: %d\n", ret);
> + }
> +
> + return 0;
> +}
> +
> +static void imx_rproc_free_mbox(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> +
> + mbox_free_channel(priv->tx_ch);
> + mbox_free_channel(priv->rx_ch);
> +}
> +
> static int imx_rproc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -481,18 +573,28 @@ static int imx_rproc_probe(struct platform_device *pdev)
> priv->dev = dev;
>
> dev_set_drvdata(dev, rproc);
> + priv->workqueue = create_workqueue(dev_name(dev));
> + if (!priv->workqueue) {
> + dev_err(dev, "cannot create workqueue\n");
> + ret = -ENOMEM;
> + goto err_put_rproc;
> + }
> +
> + ret = imx_rproc_xtr_mbox_init(rproc);
> + if (ret)
> + goto err_put_wkq;
>
> ret = imx_rproc_addr_init(priv, pdev);
> if (ret) {
> dev_err(dev, "failed on imx_rproc_addr_init\n");
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> priv->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(priv->clk)) {
> dev_err(dev, "Failed to get clock\n");
> ret = PTR_ERR(priv->clk);
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> /*
> @@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
> ret = clk_prepare_enable(priv->clk);
> if (ret) {
> dev_err(&rproc->dev, "Failed to enable clock\n");
> - goto err_put_rproc;
> + goto err_put_mbox;
> }
>
> + INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> +
> ret = rproc_add(rproc);
> if (ret) {
> dev_err(dev, "rproc_add failed\n");
> @@ -515,6 +619,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
>
> err_put_clk:
> clk_disable_unprepare(priv->clk);
> +err_put_mbox:
> + imx_rproc_free_mbox(rproc);
> +err_put_wkq:
> + destroy_workqueue(priv->workqueue);
> err_put_rproc:
> rproc_free(rproc);
>
> @@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
> struct imx_rproc *priv = rproc->priv;
>
> clk_disable_unprepare(priv->clk);
> + imx_rproc_free_mbox(rproc);
Function rproc_del() needs to be called first so that rproc_shutdown() is
executed (because rproc->auto_boot is true).
Thanks,
Mathieu
> rproc_del(rproc);
> rproc_free(rproc);
>
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
2021-01-14 21:36 ` Mathieu Poirier
@ 2021-01-15 3:27 ` Peng Fan
0 siblings, 0 replies; 17+ messages in thread
From: Peng Fan @ 2021-01-15 3:27 UTC (permalink / raw)
To: Mathieu Poirier
Cc: ohad, bjorn.andersson, o.rempel, robh+dt, shawnguo, s.hauer,
kernel, festevam, dl-linux-imx, linux-remoteproc,
linux-arm-kernel, linux-kernel, paul, matthias.bgg, agross,
patrice.chotard
> Subject: Re: [PATCH V6 10/10] remoteproc: imx_proc: enable virtio/mailbox
>
> On Tue, Jan 12, 2021 at 05:39:19PM +0800, peng.fan@nxp.com wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Use virtio/mailbox to build connection between Remote Proccessors and
> > Linux. Add work queue to handle incoming messages.
> >
> > Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> > drivers/remoteproc/imx_rproc.c | 115
> > ++++++++++++++++++++++++++++++++-
> > 1 file changed, 112 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/remoteproc/imx_rproc.c
> > b/drivers/remoteproc/imx_rproc.c index e62a53ee128e..812b077f1282
> > 100644
> > --- a/drivers/remoteproc/imx_rproc.c
> > +++ b/drivers/remoteproc/imx_rproc.c
> > @@ -7,6 +7,7 @@
> > #include <linux/err.h>
> > #include <linux/interrupt.h>
> > #include <linux/kernel.h>
> > +#include <linux/mailbox_client.h>
> > #include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > #include <linux/of_address.h>
> > @@ -15,6 +16,9 @@
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> > #include <linux/remoteproc.h>
> > +#include <linux/workqueue.h>
> > +
> > +#include "remoteproc_internal.h"
> >
> > #define IMX7D_SRC_SCR 0x0C
> > #define IMX7D_ENABLE_M4 BIT(3)
> > @@ -86,6 +90,11 @@ struct imx_rproc {
> > const struct imx_rproc_dcfg *dcfg;
> > struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
> > struct clk *clk;
> > + struct mbox_client cl;
> > + struct mbox_chan *tx_ch;
> > + struct mbox_chan *rx_ch;
> > + struct work_struct rproc_work;
> > + struct workqueue_struct *workqueue;
> > };
> >
> > static const struct imx_rproc_att imx_rproc_att_imx8mq[] = { @@
> > -366,9 +375,33 @@ static int imx_rproc_parse_fw(struct rproc *rproc,
> const struct firmware *fw)
> > return 0;
> > }
> >
> > +static void imx_rproc_kick(struct rproc *rproc, int vqid) {
> > + struct imx_rproc *priv = rproc->priv;
> > + int err;
> > + __u32 mmsg;
> > +
> > + if (!priv->tx_ch) {
> > + dev_err(priv->dev, "No initialized mbox tx channel\n");
> > + return;
> > + }
> > +
> > + /*
> > + * Send the index of the triggered virtqueue as the mu payload.
> > + * Let remote processor know which virtqueue is used.
> > + */
> > + mmsg = vqid << 16;
> > +
> > + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > + if (err < 0)
> > + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> > + __func__, vqid, err);
> > +}
> > +
> > static const struct rproc_ops imx_rproc_ops = {
> > .start = imx_rproc_start,
> > .stop = imx_rproc_stop,
> > + .kick = imx_rproc_kick,
> > .da_to_va = imx_rproc_da_to_va,
> > .load = rproc_elf_load_segments,
> > .parse_fw = imx_rproc_parse_fw,
> > @@ -444,6 +477,65 @@ static int imx_rproc_addr_init(struct imx_rproc
> *priv,
> > return 0;
> > }
> >
> > +static void imx_rproc_vq_work(struct work_struct *work) {
> > + struct imx_rproc *priv = container_of(work, struct imx_rproc,
> > + rproc_work);
> > +
> > + rproc_vq_interrupt(priv->rproc, 0);
> > + rproc_vq_interrupt(priv->rproc, 1);
> > +}
> > +
> > +static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(cl->dev);
> > + struct imx_rproc *priv = rproc->priv;
> > +
> > + queue_work(priv->workqueue, &priv->rproc_work); }
> > +
> > +static int imx_rproc_xtr_mbox_init(struct rproc *rproc) {
> > + struct imx_rproc *priv = rproc->priv;
> > + struct device *dev = priv->dev;
> > + struct mbox_client *cl;
> > + int ret;
> > +
> > + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> > + return 0;
> > +
> > + cl = &priv->cl;
> > + cl->dev = dev;
> > + cl->tx_block = true;
> > + cl->tx_tout = 100;
> > + cl->knows_txdone = false;
> > + cl->rx_callback = imx_rproc_rx_callback;
> > +
> > + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> > + if (IS_ERR(priv->tx_ch)) {
> > + ret = PTR_ERR(priv->tx_ch);
> > + return dev_err_probe(cl->dev, PTR_ERR(priv->tx_ch),
> > + "failed to request tx mailbox channel: %d\n", ret);
>
> return dev_err_probe(cl->dev, ret,
> "failed to request tx mailbox channel: %d\n", ret);
> > + }
> > +
> > + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> > + if (IS_ERR(priv->rx_ch)) {
> > + mbox_free_channel(priv->tx_ch);
> > + return dev_err_probe(cl->dev, PTR_ERR(priv->rx_ch),
> > + "failed to request mbox tx chan\n");
>
> ret = PTR_ERR(priv->rx_ch);
> return dev_err_probe(cl->dev, ret,
> "failed to request rx mailbox channel: %d\n", ret);
>
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_rproc_free_mbox(struct rproc *rproc) {
> > + struct imx_rproc *priv = rproc->priv;
> > +
> > + mbox_free_channel(priv->tx_ch);
> > + mbox_free_channel(priv->rx_ch);
> > +}
> > +
> > static int imx_rproc_probe(struct platform_device *pdev) {
> > struct device *dev = &pdev->dev;
> > @@ -481,18 +573,28 @@ static int imx_rproc_probe(struct
> platform_device *pdev)
> > priv->dev = dev;
> >
> > dev_set_drvdata(dev, rproc);
> > + priv->workqueue = create_workqueue(dev_name(dev));
> > + if (!priv->workqueue) {
> > + dev_err(dev, "cannot create workqueue\n");
> > + ret = -ENOMEM;
> > + goto err_put_rproc;
> > + }
> > +
> > + ret = imx_rproc_xtr_mbox_init(rproc);
> > + if (ret)
> > + goto err_put_wkq;
> >
> > ret = imx_rproc_addr_init(priv, pdev);
> > if (ret) {
> > dev_err(dev, "failed on imx_rproc_addr_init\n");
> > - goto err_put_rproc;
> > + goto err_put_mbox;
> > }
> >
> > priv->clk = devm_clk_get(dev, NULL);
> > if (IS_ERR(priv->clk)) {
> > dev_err(dev, "Failed to get clock\n");
> > ret = PTR_ERR(priv->clk);
> > - goto err_put_rproc;
> > + goto err_put_mbox;
> > }
> >
> > /*
> > @@ -502,9 +604,11 @@ static int imx_rproc_probe(struct platform_device
> *pdev)
> > ret = clk_prepare_enable(priv->clk);
> > if (ret) {
> > dev_err(&rproc->dev, "Failed to enable clock\n");
> > - goto err_put_rproc;
> > + goto err_put_mbox;
> > }
> >
> > + INIT_WORK(&(priv->rproc_work), imx_rproc_vq_work);
> > +
> > ret = rproc_add(rproc);
> > if (ret) {
> > dev_err(dev, "rproc_add failed\n"); @@ -515,6 +619,10 @@ static
> int
> > imx_rproc_probe(struct platform_device *pdev)
> >
> > err_put_clk:
> > clk_disable_unprepare(priv->clk);
> > +err_put_mbox:
> > + imx_rproc_free_mbox(rproc);
> > +err_put_wkq:
> > + destroy_workqueue(priv->workqueue);
> > err_put_rproc:
> > rproc_free(rproc);
> >
> > @@ -527,6 +635,7 @@ static int imx_rproc_remove(struct platform_device
> *pdev)
> > struct imx_rproc *priv = rproc->priv;
> >
> > clk_disable_unprepare(priv->clk);
> > + imx_rproc_free_mbox(rproc);
>
> Function rproc_del() needs to be called first so that rproc_shutdown() is
> executed (because rproc->auto_boot is true).
Will fix it in next version.
Thanks,
Peng.
>
> Thanks,
> Mathieu
>
> > rproc_del(rproc);
> > rproc_free(rproc);
> >
> > --
> > 2.28.0
> >
^ permalink raw reply [flat|nested] 17+ messages in thread