* For review: documentation of clone3() system call @ 2019-10-25 16:59 Michael Kerrisk (man-pages) 2019-10-25 17:07 ` Christian Brauner ` (4 more replies) 0 siblings, 5 replies; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-10-25 16:59 UTC (permalink / raw) To: Christian Brauner Cc: lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn Hello Christian and all, I've made a first shot at adding documentation for clone3(). You can see the diff here: https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 In the end, I decided that the most straightforward approach was to add the documentation as part of the existing clone(2) page. This has the advantage of avoiding duplication of information across two pages, and perhaps also makes it easier to see the commonality of the two APIs. Because the new text is integrated into the existing page, I think it makes most sense to just show that page text for review purposes. I welcome input on the below. The notable changes are: * In the first part of the page, up to and including the paragraph with the subheading "The flags bit mask" * Minor changes in the description of CLONE_CHILD_CLEARTID, CLONE_CHILD_SETTID, CLONE_PARENT_SETTID, and CLONE_PIDFD, to reflect the argument differences between clone() and clone2() Most of the resy of page is unchanged. I welcome fixes, suggestions for improvements, etc. Thanks, Michael CLONE(2) Linux Programmer's Manual CLONE(2) NAME clone, __clone2 - create a child process SYNOPSIS /* Prototype for the glibc wrapper function */ #define _GNU_SOURCE #include <sched.h> int clone(int (*fn)(void *), void *stack, int flags, void *arg, ... /* pid_t *parent_tid, void *tls, pid_t *child_tid */ ); /* For the prototype of the raw clone() system call, see NOTES */ long clone3(struct clone_args *cl_args, size_t size); Note: There is not yet a glibc wrapper for clone3(); see NOTES. DESCRIPTION These system calls create a new process, in a manner similar to fork(2). Unlike fork(2), these system calls allow the child process to share parts of its execution context with the calling process, such as the virtual address space, the table of file descriptors, and the table of signal handlers. (Note that on this manual page, "calling process" normally corresponds to "parent process". But see the description of CLONE_PARENT below.) This page describes the following interfaces: * The glibc clone() wrapper function and the underlying system call on which it is based. The main text describes the wrapper function; the differences for the raw system call are described toward the end of this page. * The newer clone3() system call. The clone() wrapper function When the child process is created with the clone() wrapper func‐ tion, it commences execution by calling the function pointed to by the argument fn. (This differs from fork(2), where execution con‐ tinues in the child from the point of the fork(2) call.) The arg argument is passed as the argument of the function fn. When the fn(arg) function returns, the child process terminates. The integer returned by fn is the exit status for the child process. The child process may also terminate explicitly by call‐ ing exit(2) or after receiving a fatal signal. The stack argument specifies the location of the stack used by the child process. Since the child and calling process may share mem‐ ory, it is not possible for the child process to execute in the same stack as the calling process. The calling process must therefore set up memory space for the child stack and pass a pointer to this space to clone(). Stacks grow downward on all processors that run Linux (except the HP PA processors), so stack usually points to the topmost address of the memory space set up for the child stack. Note that clone() does not provide a means whereby the caller can inform the kernel of the size of the stack area. The remaining arguments to clone() are discussed below. clone3() The clone3() system call provides a superset of the functionality of the older clone() interface. It also provides a number of API improvements, including: space for additional flags bits; cleaner separation in the use of various arguments; and the ability to specify the size of the child's stack area. As with fork(2), clone3() returns in both the parent and the child. It returns 0 in the child process and returns the PID of the child in the parent. The cl_args argument of clone3() is a structure of the following form: struct clone_args { u64 flags; /* Flags bit mask */ u64 pidfd; /* Where to store PID file descriptor (int *) */ u64 child_tid; /* Where to store child TID, in child's memory (int *) */ u64 parent_tid; /* Where to store child TID, in parent's memory (int *) */ u64 exit_signal; /* Signal to deliver to parent on child termination */ u64 stack; /* Pointer to lowest byte of stack */ u64 stack_size; /* Size of stack */ u64 tls; /* Location of new TLS */ }; The size argument that is supplied to clone3() should be initial‐ ized to the size of this structure. (The existence of the size argument permits future extensions to the clone_args structure.) The stack for the child process is specified via cl_args.stack, which points to the lowest byte of the stack area, and cl_args.stack_size, which specifies the size of the stack in bytes. In the case where the CLONE_VM flag (see below) is speci‐ fied, a stack must be explicitly allocated and specified. Other‐ wise, these two fields can be specified as NULL and 0, which causes the child to use the same stack area as the parent (in the child's own virtual address space). The remaining fields in the cl_args argument are discussed below. Equivalence between clone() and clone3() arguments Unlike the older clone() interface, where arguments are passed individually, in the newer clone3() interface the arguments are packaged into the clone_args structure shown above. This struc‐ ture allows for a superset of the information passed via the clone() arguments. The following table shows the equivalence between the arguments of clone() and the fields in the clone_args argument supplied to clone3(): clone() clone(3) Notes cl_args field flags & ~0xff flags parent_tid pidfd See CLONE_PIDFD child_tid child_tid See CLONE_CHILD_SETTID parent_tid parent_tid See CLONE_PARENT_SETTID flags & 0xff exit_signal stack stack --- stack_size tls tls See CLONE_SETTLS The child termination signal When the child process terminates, a signal may be sent to the parent. The termination signal is specified in the low byte of flags (clone()) or in cl_args.exit_signal (clone3()). If this signal is specified as anything other than SIGCHLD, then the par‐ ent process must specify the __WALL or __WCLONE options when wait‐ ing for the child with wait(2). If no signal (i.e., zero) is specified, then the parent process is not signaled when the child terminates. The flags bit mask Both clone() and clone3() allow a flags bit mask that modifies their behavior and allows the caller to specify what is shared between the calling process and the child process. This bit mask is specified as a bitwise-OR of zero or more of the constants listed below. Except as otherwise noted below, these flags are available (and have the same effect) in both clone() and clone3(). CLONE_CHILD_CLEARTID (since Linux 2.5.49) Clear (zero) the child thread ID at the location pointed to by child_tid (clone()) or cl_args.child_tid (clone3()) in child memory when the child exits, and do a wakeup on the futex at that address. The address involved may be changed by the set_tid_address(2) system call. This is used by threading libraries. CLONE_CHILD_SETTID (since Linux 2.5.49) Store the child thread ID at the location pointed to by child_tid (clone()) or cl_args.child_tid (clone3()) in the child's memory. The store operation completes before clone() returns control to user space in the child process. (Note that the store operation may not have completed before clone() returns in the parent process, which will be relevant if the CLONE_VM flag is also employed.) CLONE_FILES (since Linux 2.0) If CLONE_FILES is set, the calling process and the child process share the same file descriptor table. Any file descriptor created by the calling process or by the child process is also valid in the other process. Similarly, if one of the processes closes a file descriptor, or changes its associated flags (using the fcntl(2) F_SETFD opera‐ tion), the other process is also affected. If a process sharing a file descriptor table calls execve(2), its file descriptor table is duplicated (unshared). If CLONE_FILES is not set, the child process inherits a copy of all file descriptors opened in the calling process at the time of clone(). Subsequent operations that open or close file descriptors, or change file descriptor flags, performed by either the calling process or the child process do not affect the other process. Note, however, that the duplicated file descriptors in the child refer to the same open file descriptions as the corresponding file descriptors in the calling process, and thus share file offsets and file status flags (see open(2)). CLONE_FS (since Linux 2.0) If CLONE_FS is set, the caller and the child process share the same filesystem information. This includes the root of the filesystem, the current working directory, and the umask. Any call to chroot(2), chdir(2), or umask(2) per‐ formed by the calling process or the child process also affects the other process. If CLONE_FS is not set, the child process works on a copy of the filesystem information of the calling process at the time of the clone() call. Calls to chroot(2), chdir(2), or umask(2) performed later by one of the processes do not affect the other process. CLONE_IO (since Linux 2.6.25) If CLONE_IO is set, then the new process shares an I/O con‐ text with the calling process. If this flag is not set, then (as with fork(2)) the new process has its own I/O con‐ text. The I/O context is the I/O scope of the disk scheduler (i.e., what the I/O scheduler uses to model scheduling of a process's I/O). If processes share the same I/O context, they are treated as one by the I/O scheduler. As a conse‐ quence, they get to share disk time. For some I/O sched‐ ulers, if two processes share an I/O context, they will be allowed to interleave their disk access. If several threads are doing I/O on behalf of the same process (aio_read(3), for instance), they should employ CLONE_IO to get better I/O performance. If the kernel is not configured with the CONFIG_BLOCK option, this flag is a no-op. CLONE_NEWCGROUP (since Linux 4.6) Create the process in a new cgroup namespace. If this flag is not set, then (as with fork(2)) the process is created in the same cgroup namespaces as the calling process. This flag is intended for the implementation of containers. For further information on cgroup namespaces, see cgroup_namespaces(7). Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWCGROUP. CLONE_NEWIPC (since Linux 2.6.19) If CLONE_NEWIPC is set, then create the process in a new IPC namespace. If this flag is not set, then (as with fork(2)), the process is created in the same IPC namespace as the calling process. This flag is intended for the implementation of containers. An IPC namespace provides an isolated view of System V IPC objects (see sysvipc(7)) and (since Linux 2.6.30) POSIX message queues (see mq_overview(7)). The common character‐ istic of these IPC mechanisms is that IPC objects are iden‐ tified by mechanisms other than filesystem pathnames. Objects created in an IPC namespace are visible to all other processes that are members of that namespace, but are not visible to processes in other IPC namespaces. When an IPC namespace is destroyed (i.e., when the last process that is a member of the namespace terminates), all IPC objects in the namespace are automatically destroyed. Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWIPC. This flag can't be specified in conjunction with CLONE_SYSVSEM. For further information on IPC namespaces, see names‐ paces(7). CLONE_NEWNET (since Linux 2.6.24) (The implementation of this flag was completed only by about kernel version 2.6.29.) If CLONE_NEWNET is set, then create the process in a new network namespace. If this flag is not set, then (as with fork(2)) the process is created in the same network names‐ pace as the calling process. This flag is intended for the implementation of containers. A network namespace provides an isolated view of the net‐ working stack (network device interfaces, IPv4 and IPv6 protocol stacks, IP routing tables, firewall rules, the /proc/net and /sys/class/net directory trees, sockets, etc.). A physical network device can live in exactly one network namespace. A virtual network (veth(4)) device pair provides a pipe-like abstraction that can be used to create tunnels between network namespaces, and can be used to cre‐ ate a bridge to a physical network device in another names‐ pace. When a network namespace is freed (i.e., when the last process in the namespace terminates), its physical network devices are moved back to the initial network namespace (not to the parent of the process). For further informa‐ tion on network namespaces, see namespaces(7). Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWNET. CLONE_NEWNS (since Linux 2.4.19) If CLONE_NEWNS is set, the cloned child is started in a new mount namespace, initialized with a copy of the namespace of the parent. If CLONE_NEWNS is not set, the child lives in the same mount namespace as the parent. Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWNS. It is not permitted to specify both CLONE_NEWNS and CLONE_FS in the same clone() call. For further information on mount namespaces, see names‐ paces(7) and mount_namespaces(7). CLONE_NEWPID (since Linux 2.6.24) If CLONE_NEWPID is set, then create the process in a new PID namespace. If this flag is not set, then (as with fork(2)) the process is created in the same PID namespace as the calling process. This flag is intended for the implementation of containers. For further information on PID namespaces, see names‐ paces(7) and pid_namespaces(7). Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWPID. This flag can't be specified in conjunction with CLONE_THREAD or CLONE_PARENT. CLONE_NEWUSER (This flag first became meaningful for clone() in Linux 2.6.23, the current clone() semantics were merged in Linux 3.5, and the final pieces to make the user namespaces com‐ pletely usable were merged in Linux 3.8.) If CLONE_NEWUSER is set, then create the process in a new user namespace. If this flag is not set, then (as with fork(2)) the process is created in the same user namespace as the calling process. Before Linux 3.8, use of CLONE_NEWUSER required that the caller have three capabilities: CAP_SYS_ADMIN, CAP_SETUID, and CAP_SETGID. Starting with Linux 3.8, no privileges are needed to create a user namespace. This flag can't be specified in conjunction with CLONE_THREAD or CLONE_PARENT. For security reasons, CLONE_NEWUSER cannot be specified in conjunction with CLONE_FS. For further information on user namespaces, see names‐ paces(7) and user_namespaces(7). CLONE_NEWUTS (since Linux 2.6.19) If CLONE_NEWUTS is set, then create the process in a new UTS namespace, whose identifiers are initialized by dupli‐ cating the identifiers from the UTS namespace of the call‐ ing process. If this flag is not set, then (as with fork(2)) the process is created in the same UTS namespace as the calling process. This flag is intended for the implementation of containers. A UTS namespace is the set of identifiers returned by uname(2); among these, the domain name and the hostname can be modified by setdomainname(2) and sethostname(2), respec‐ tively. Changes made to the identifiers in a UTS namespace are visible to all other processes in the same namespace, but are not visible to processes in other UTS namespaces. Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWUTS. For further information on UTS namespaces, see names‐ paces(7). CLONE_PARENT (since Linux 2.3.12) If CLONE_PARENT is set, then the parent of the new child (as returned by getppid(2)) will be the same as that of the calling process. If CLONE_PARENT is not set, then (as with fork(2)) the child's parent is the calling process. Note that it is the parent process, as returned by getp‐ pid(2), which is signaled when the child terminates, so that if CLONE_PARENT is set, then the parent of the calling process, rather than the calling process itself, will be signaled. CLONE_PARENT_SETTID (since Linux 2.5.49) Store the child thread ID at the location pointed to by parent_tid (clone()) or cl_args.child_tid (clone3()) in the parent's memory. (In Linux 2.5.32-2.5.48 there was a flag CLONE_SETTID that did this.) The store operation completes before clone() returns control to user space. CLONE_PID (Linux 2.0 to 2.5.15) If CLONE_PID is set, the child process is created with the same process ID as the calling process. This is good for hacking the system, but otherwise of not much use. From Linux 2.3.21 onward, this flag could be specified only by the system boot process (PID 0). The flag disappeared com‐ pletely from the kernel sources in Linux 2.5.16. Since then, the kernel silently ignores this bit if it is speci‐ fied in flags. CLONE_PIDFD (since Linux 5.2) If this flag is specified, a PID file descriptor referring to the child process is allocated and placed at a specified location in the parent's memory. The close-on-exec flag is set on this new file descriptor. PID file descriptors can be used for the purposes described in pidfd_open(2). * When using clone3(), the PID file descriptor is placed at the location pointed to by cl_args.pidfd. * When using clone(), the PID file descriptor is placed at the location pointed to by parent_tid. Since the par‐ ent_tid argument is used to return the PID file descrip‐ tor, CLONE_PIDFD cannot be used with CLONE_PARENT_SETTID when calling clone(). It is currently not possible to use this flag together with CLONE_THREAD. This means that the process identified by the PID file descriptor will always be a thread-group leader. For a while there was a CLONE_DETACHED flag. This flag is usually ignored when passed along with other flags. How‐ ever, when passed alongside CLONE_PIDFD, an error is returned. This ensures that this flag can be reused for further PID file descriptor features in the future. CLONE_PTRACE (since Linux 2.2) If CLONE_PTRACE is specified, and the calling process is being traced, then trace the child also (see ptrace(2)). CLONE_SETTLS (since Linux 2.5.32) The TLS (Thread Local Storage) descriptor is set to tls. The interpretation of tls and the resulting effect is architecture dependent. On x86, tls is interpreted as a struct user_desc * (see set_thread_area(2)). On x86-64 it is the new value to be set for the %fs base register (see the ARCH_SET_FS argument to arch_prctl(2)). On architec‐ tures with a dedicated TLS register, it is the new value of that register. CLONE_SIGHAND (since Linux 2.0) If CLONE_SIGHAND is set, the calling process and the child process share the same table of signal handlers. If the calling process or child process calls sigaction(2) to change the behavior associated with a signal, the behavior is changed in the other process as well. However, the calling process and child processes still have distinct signal masks and sets of pending signals. So, one of them may block or unblock signals using sigprocmask(2) without affecting the other process. If CLONE_SIGHAND is not set, the child process inherits a copy of the signal handlers of the calling process at the time clone() is called. Calls to sigaction(2) performed later by one of the processes have no effect on the other process. Since Linux 2.6.0, flags must also include CLONE_VM if CLONE_SIGHAND is specified CLONE_STOPPED (since Linux 2.6.0) If CLONE_STOPPED is set, then the child is initially stopped (as though it was sent a SIGSTOP signal), and must be resumed by sending it a SIGCONT signal. This flag was deprecated from Linux 2.6.25 onward, and was removed altogether in Linux 2.6.38. Since then, the kernel silently ignores it without error. Starting with Linux 4.6, the same bit was reused for the CLONE_NEWCGROUP flag. CLONE_SYSVSEM (since Linux 2.5.10) If CLONE_SYSVSEM is set, then the child and the calling process share a single list of System V semaphore adjust‐ ment (semadj) values (see semop(2)). In this case, the shared list accumulates semadj values across all processes sharing the list, and semaphore adjustments are performed only when the last process that is sharing the list termi‐ nates (or ceases sharing the list using unshare(2)). If this flag is not set, then the child has a separate semadj list that is initially empty. CLONE_THREAD (since Linux 2.4.0) If CLONE_THREAD is set, the child is placed in the same thread group as the calling process. To make the remainder of the discussion of CLONE_THREAD more readable, the term "thread" is used to refer to the processes within a thread group. Thread groups were a feature added in Linux 2.4 to support the POSIX threads notion of a set of threads that share a single PID. Internally, this shared PID is the so-called thread group identifier (TGID) for the thread group. Since Linux 2.4, calls to getpid(2) return the TGID of the call‐ er. The threads within a group can be distinguished by their (system-wide) unique thread IDs (TID). A new thread's TID is available as the function result returned to the caller of clone(), and a thread can obtain its own TID using get‐ tid(2). When a call is made to clone() without specifying CLONE_THREAD, then the resulting thread is placed in a new thread group whose TGID is the same as the thread's TID. This thread is the leader of the new thread group. A new thread created with CLONE_THREAD has the same parent process as the caller of clone() (i.e., like CLONE_PARENT), so that calls to getppid(2) return the same value for all of the threads in a thread group. When a CLONE_THREAD thread terminates, the thread that created it using clone() is not sent a SIGCHLD (or other termination) signal; nor can the status of such a thread be obtained using wait(2). (The thread is said to be detached.) After all of the threads in a thread group terminate the parent process of the thread group is sent a SIGCHLD (or other termination) signal. If any of the threads in a thread group performs an execve(2), then all threads other than the thread group leader are terminated, and the new program is executed in the thread group leader. If one of the threads in a thread group creates a child using fork(2), then any thread in the group can wait(2) for that child. Since Linux 2.5.35, flags must also include CLONE_SIGHAND if CLONE_THREAD is specified (and note that, since Linux 2.6.0, CLONE_SIGHAND also requires CLONE_VM to be included). Signal dispositions and actions are process-wide: if an unhandled signal is delivered to a thread, then it will affect (terminate, stop, continue, be ignored in) all mem‐ bers of the thread group. Each thread has its own signal mask, as set by sigproc‐ mask(2). A signal may be process-directed or thread-directed. A process-directed signal is targeted at a thread group (i.e., a TGID), and is delivered to an arbitrarily selected thread from among those that are not blocking the signal. A signal may be process-directed because it was generated by the kernel for reasons other than a hardware exception, or because it was sent using kill(2) or sigqueue(3). A thread-directed signal is targeted at (i.e., delivered to) a specific thread. A signal may be thread directed because it was sent using tgkill(2) or pthread_sigqueue(3), or because the thread executed a machine language instruction that triggered a hardware exception (e.g., invalid memory access triggering SIGSEGV or a floating-point exception triggering SIGFPE). A call to sigpending(2) returns a signal set that is the union of the pending process-directed signals and the sig‐ nals that are pending for the calling thread. If a process-directed signal is delivered to a thread group, and the thread group has installed a handler for the signal, then the handler will be invoked in exactly one, arbitrarily selected member of the thread group that has not blocked the signal. If multiple threads in a group are waiting to accept the same signal using sigwaitinfo(2), the kernel will arbitrarily select one of these threads to receive the signal. CLONE_UNTRACED (since Linux 2.5.46) If CLONE_UNTRACED is specified, then a tracing process can‐ not force CLONE_PTRACE on this child process. CLONE_VFORK (since Linux 2.2) If CLONE_VFORK is set, the execution of the calling process is suspended until the child releases its virtual memory resources via a call to execve(2) or _exit(2) (as with vfork(2)). If CLONE_VFORK is not set, then both the calling process and the child are schedulable after the call, and an appli‐ cation should not rely on execution occurring in any par‐ ticular order. CLONE_VM (since Linux 2.0) If CLONE_VM is set, the calling process and the child process run in the same memory space. In particular, mem‐ ory writes performed by the calling process or by the child process are also visible in the other process. Moreover, any memory mapping or unmapping performed with mmap(2) or munmap(2) by the child or calling process also affects the other process. If CLONE_VM is not set, the child process runs in a sepa‐ rate copy of the memory space of the calling process at the time of clone(). Memory writes or file mappings/unmappings performed by one of the processes do not affect the other, as with fork(2). NOTES One use of these systems calls is to implement threads: multiple flows of control in a program that run concurrently in a shared address space. Glibc does not provide a wrapper for clone(3); call it using syscall(2). Note that the glibc clone() wrapper function makes some changes in the memory pointed to by stack (changes required to set the stack up correctly for the child) before invoking the clone() system call. So, in cases where clone() is used to recursively create children, do not use the buffer employed for the parent's stack as the stack of the child. C library/kernel differences The raw clone() system call corresponds more closely to fork(2) in that execution in the child continues from the point of the call. As such, the fn and arg arguments of the clone() wrapper function are omitted. Another difference for the raw clone() system call is that the stack argument may be NULL, in which case the child uses a dupli‐ cate of the parent's stack. (Copy-on-write semantics ensure that the child gets separate copies of stack pages when either process modifies the stack.) In this case, for correct operation, the CLONE_VM option should not be specified. (If the child shares the parent's memory because of the use of the CLONE_VM flag, then no copy-on-write duplication occurs and chaos is likely to result.) The order of the arguments also differs in the raw system call, and there are variations in the arguments across architectures, as detailed in the following paragraphs. The raw system call interface on x86-64 and some other architec‐ tures (including sh, tile, ia-64, and alpha) is: long clone(unsigned long flags, void *stack, int *parent_tid, int *child_tid, unsigned long tls); On x86-32, and several other common architectures (including score, ARM, ARM 64, PA-RISC, arc, Power PC, xtensa, and MIPS), the order of the last two arguments is reversed: long clone(unsigned long flags, void *stack, int *parent_tid, unsigned long tls, int *child_tid); On the cris and s390 architectures, the order of the first two arguments is reversed: long clone(void *stack, unsigned long flags, int *parent_tid, int *child_tid, unsigned long tls); On the microblaze architecture, an additional argument is sup‐ plied: long clone(unsigned long flags, void *stack, int stack_size, /* Size of stack */ int *parent_tid, int *child_tid, unsigned long tls); blackfin, m68k, and sparc The argument-passing conventions on blackfin, m68k, and sparc are different from the descriptions above. For details, see the ker‐ nel (and glibc) source. ia64 On ia64, a different interface is used: int __clone2(int (*fn)(void *), void *stack_base, size_t stack_size, int flags, void *arg, ... /* pid_t *parent_tid, struct user_desc *tls, pid_t *child_tid */ ); The prototype shown above is for the glibc wrapper function; for the system call itself, the prototype can be described as follows (it is identical to the clone() prototype on microblaze): long clone2(unsigned long flags, void *stack_base, int stack_size, /* Size of stack */ int *parent_tid, int *child_tid, unsigned long tls); __clone2() operates in the same way as clone(), except that stack_base points to the lowest address of the child's stack area, and stack_size specifies the size of the stack pointed to by stack_base. Linux 2.4 and earlier In Linux 2.4 and earlier, clone() does not take arguments par‐ ent_tid, tls, and child_tid. RETURN VALUE On success, the thread ID of the child process is returned in the caller's thread of execution. On failure, -1 is returned in the caller's context, no child process will be created, and errno will be set appropriately. ERRORS EAGAIN Too many processes are already running; see fork(2). EINVAL CLONE_SIGHAND was specified, but CLONE_VM was not. (Since Linux 2.6.0.) EINVAL CLONE_THREAD was specified, but CLONE_SIGHAND was not. (Since Linux 2.5.35.) EINVAL CLONE_THREAD was specified, but the current process previ‐ ously called unshare(2) with the CLONE_NEWPID flag or used setns(2) to reassociate itself with a PID namespace. EINVAL Both CLONE_FS and CLONE_NEWNS were specified in flags. EINVAL (since Linux 3.9) Both CLONE_NEWUSER and CLONE_FS were specified in flags. EINVAL Both CLONE_NEWIPC and CLONE_SYSVSEM were specified in flags. EINVAL One (or both) of CLONE_NEWPID or CLONE_NEWUSER and one (or both) of CLONE_THREAD or CLONE_PARENT were specified in flags. EINVAL Returned by the glibc clone() wrapper function when fn or stack is specified as NULL. EINVAL CLONE_NEWIPC was specified in flags, but the kernel was not configured with the CONFIG_SYSVIPC and CONFIG_IPC_NS options. EINVAL CLONE_NEWNET was specified in flags, but the kernel was not configured with the CONFIG_NET_NS option. EINVAL CLONE_NEWPID was specified in flags, but the kernel was not configured with the CONFIG_PID_NS option. EINVAL CLONE_NEWUSER was specified in flags, but the kernel was not configured with the CONFIG_USER_NS option. EINVAL CLONE_NEWUTS was specified in flags, but the kernel was not configured with the CONFIG_UTS_NS option. EINVAL stack is not aligned to a suitable boundary for this archi‐ tecture. For example, on aarch64, stack must be a multiple of 16. EINVAL CLONE_PIDFD was specified together with CLONE_DETACHED. EINVAL CLONE_PIDFD was specified together with CLONE_THREAD. EINVAL (clone() only) CLONE_PIDFD was specified together with CLONE_PARENT_SET‐ TID. ENOMEM Cannot allocate sufficient memory to allocate a task struc‐ ture for the child, or to copy those parts of the caller's context that need to be copied. ENOSPC (since Linux 3.7) CLONE_NEWPID was specified in flags, but the limit on the nesting depth of PID namespaces would have been exceeded; see pid_namespaces(7). ENOSPC (since Linux 4.9; beforehand EUSERS) CLONE_NEWUSER was specified in flags, and the call would cause the limit on the number of nested user namespaces to be exceeded. See user_namespaces(7). From Linux 3.11 to Linux 4.8, the error diagnosed in this case was EUSERS. ENOSPC (since Linux 4.9) One of the values in flags specified the creation of a new user namespace, but doing so would have caused the limit defined by the corresponding file in /proc/sys/user to be exceeded. For further details, see namespaces(7). EPERM CLONE_NEWCGROUP, CLONE_NEWIPC, CLONE_NEWNET, CLONE_NEWNS, CLONE_NEWPID, or CLONE_NEWUTS was specified by an unprivi‐ leged process (process without CAP_SYS_ADMIN). EPERM CLONE_PID was specified by a process other than process 0. (This error occurs only on Linux 2.5.15 and earlier.) EPERM CLONE_NEWUSER was specified in flags, but either the effec‐ tive user ID or the effective group ID of the caller does not have a mapping in the parent namespace (see user_names‐ paces(7)). EPERM (since Linux 3.9) CLONE_NEWUSER was specified in flags and the caller is in a chroot environment (i.e., the caller's root directory does not match the root directory of the mount namespace in which it resides). ERESTARTNOINTR (since Linux 2.6.17) System call was interrupted by a signal and will be restarted. (This can be seen only during a trace.) EUSERS (Linux 3.11 to Linux 4.8) CLONE_NEWUSER was specified in flags, and the limit on the number of nested user namespaces would be exceeded. See the discussion of the ENOSPC error above. VERSIONS The clone3() system call first appeared in Linux 5.3. CONFORMING TO These system calls are Linux-specific and should not be used in programs intended to be portable. NOTES The kcmp(2) system call can be used to test whether two processes share various resources such as a file descriptor table, System V semaphore undo operations, or a virtual address space. Handlers registered using pthread_atfork(3) are not executed dur‐ ing a call to clone(). In the Linux 2.4.x series, CLONE_THREAD generally does not make the parent of the new thread the same as the parent of the calling process. However, for kernel versions 2.4.7 to 2.4.18 the CLONE_THREAD flag implied the CLONE_PARENT flag (as in Linux 2.6.0 and later). For a while there was CLONE_DETACHED (introduced in 2.5.32): par‐ ent wants no child-exit signal. In Linux 2.6.2, the need to give this flag together with CLONE_THREAD disappeared. This flag is still defined, but has no effect. On i386, clone() should not be called through vsyscall, but directly through int $0x80. BUGS GNU C library versions 2.3.4 up to and including 2.24 contained a wrapper function for getpid(2) that performed caching of PIDs. This caching relied on support in the glibc wrapper for clone(), but limitations in the implementation meant that the cache was not up to date in some circumstances. In particular, if a signal was delivered to the child immediately after the clone() call, then a call to getpid(2) in a handler for the signal could return the PID of the calling process ("the parent"), if the clone wrapper had not yet had a chance to update the PID cache in the child. (This discussion ignores the case where the child was created using CLONE_THREAD, when getpid(2) should return the same value in the child and in the process that called clone(), since the caller and the child are in the same thread group. The stale-cache problem also does not occur if the flags argument includes CLONE_VM.) To get the truth, it was sometimes necessary to use code such as the following: #include <syscall.h> pid_t mypid; mypid = syscall(SYS_getpid); Because of the stale-cache problem, as well as other problems noted in getpid(2), the PID caching feature was removed in glibc 2.25. EXAMPLE The following program demonstrates the use of clone() to create a child process that executes in a separate UTS namespace. The child changes the hostname in its UTS namespace. Both parent and child then display the system hostname, making it possible to see that the hostname differs in the UTS namespaces of the parent and child. For an example of the use of this program, see setns(2). Program source #define _GNU_SOURCE #include <sys/wait.h> #include <sys/utsname.h> #include <sched.h> #include <string.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \ } while (0) static int /* Start function for cloned child */ childFunc(void *arg) { struct utsname uts; /* Change hostname in UTS namespace of child */ if (sethostname(arg, strlen(arg)) == -1) errExit("sethostname"); /* Retrieve and display hostname */ if (uname(&uts) == -1) errExit("uname"); printf("uts.nodename in child: %s\n", uts.nodename); /* Keep the namespace open for a while, by sleeping. This allows some experimentation--for example, another process might join the namespace. */ sleep(200); return 0; /* Child terminates now */ } #define STACK_SIZE (1024 * 1024) /* Stack size for cloned child */ int main(int argc, char *argv[]) { char *stack; /* Start of stack buffer */ char *stackTop; /* End of stack buffer */ pid_t pid; struct utsname uts; if (argc < 2) { fprintf(stderr, "Usage: %s <child-hostname>\n", argv[0]); exit(EXIT_SUCCESS); } /* Allocate stack for child */ stack = malloc(STACK_SIZE); if (stack == NULL) errExit("malloc"); stackTop = stack + STACK_SIZE; /* Assume stack grows downward */ /* Create child that has its own UTS namespace; child commences execution in childFunc() */ pid = clone(childFunc, stackTop, CLONE_NEWUTS | SIGCHLD, argv[1]); if (pid == -1) errExit("clone"); printf("clone() returned %ld\n", (long) pid); /* Parent falls through to here */ sleep(1); /* Give child time to change its hostname */ /* Display hostname in parent's UTS namespace. This will be different from hostname in child's UTS namespace. */ if (uname(&uts) == -1) errExit("uname"); printf("uts.nodename in parent: %s\n", uts.nodename); if (waitpid(pid, NULL, 0) == -1) /* Wait for child */ errExit("waitpid"); printf("child has terminated\n"); exit(EXIT_SUCCESS); } SEE ALSO fork(2), futex(2), getpid(2), gettid(2), kcmp(2), pidfd_open(2), set_thread_area(2), set_tid_address(2), setns(2), tkill(2), unshare(2), wait(2), capabilities(7), namespaces(7), pthreads(7) -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) @ 2019-10-25 17:07 ` Christian Brauner 2019-11-07 12:26 ` Michael Kerrisk (man-pages) 2019-10-26 2:28 ` G. Branden Robinson ` (3 subsequent siblings) 4 siblings, 1 reply; 30+ messages in thread From: Christian Brauner @ 2019-10-25 17:07 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Christian Brauner, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: > Hello Christian and all, > > I've made a first shot at adding documentation for clone3(). You can > see the diff here: > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > > In the end, I decided that the most straightforward approach was to > add the documentation as part of the existing clone(2) page. This has > the advantage of avoiding duplication of information across two pages, > and perhaps also makes it easier to see the commonality of the two > APIs. > > Because the new text is integrated into the existing page, I think it > makes most sense to just show that page text for review purposes. I > welcome input on the below. > > The notable changes are: > * In the first part of the page, up to and including the paragraph > with the subheading "The flags bit mask" > * Minor changes in the description of CLONE_CHILD_CLEARTID, > CLONE_CHILD_SETTID, CLONE_PARENT_SETTID, and CLONE_PIDFD, to reflect > the argument differences between clone() and clone2() > > Most of the resy of page is unchanged. > > I welcome fixes, suggestions for improvements, etc. Thank you Michael, for doing this. I will hopefully get around to reviewing this soon but it might take a few days (latest after next week :( because of OSS/LSS). Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 17:07 ` Christian Brauner @ 2019-11-07 12:26 ` Michael Kerrisk (man-pages) 0 siblings, 0 replies; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-11-07 12:26 UTC (permalink / raw) To: Christian Brauner Cc: Christian Brauner, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn Hey, Christian, Ping! Cheers, Michael On Fri, 25 Oct 2019 at 19:09, Christian Brauner <christian.brauner@ubuntu.com> wrote: > > On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: > > Hello Christian and all, > > > > I've made a first shot at adding documentation for clone3(). You can > > see the diff here: > > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > > > > In the end, I decided that the most straightforward approach was to > > add the documentation as part of the existing clone(2) page. This has > > the advantage of avoiding duplication of information across two pages, > > and perhaps also makes it easier to see the commonality of the two > > APIs. > > > > Because the new text is integrated into the existing page, I think it > > makes most sense to just show that page text for review purposes. I > > welcome input on the below. > > > > The notable changes are: > > * In the first part of the page, up to and including the paragraph > > with the subheading "The flags bit mask" > > * Minor changes in the description of CLONE_CHILD_CLEARTID, > > CLONE_CHILD_SETTID, CLONE_PARENT_SETTID, and CLONE_PIDFD, to reflect > > the argument differences between clone() and clone2() > > > > Most of the resy of page is unchanged. > > > > I welcome fixes, suggestions for improvements, etc. > > Thank you Michael, for doing this. I will hopefully get around to > reviewing this soon but it might take a few days (latest after next week > :( because of OSS/LSS). > > Christian -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) 2019-10-25 17:07 ` Christian Brauner @ 2019-10-26 2:28 ` G. Branden Robinson 2019-10-31 6:06 ` Michael Kerrisk (man-pages) 2019-10-28 15:12 ` Jann Horn ` (2 subsequent siblings) 4 siblings, 1 reply; 30+ messages in thread From: G. Branden Robinson @ 2019-10-26 2:28 UTC (permalink / raw) To: Michael Kerrisk (man-pages); +Cc: linux-man [-- Attachment #1: Type: text/plain, Size: 294 bytes --] At 2019-10-25T18:59:31+0200, Michael Kerrisk (man-pages) wrote: [...] > clone() clone(3) Notes [...] > Glibc does not provide a wrapper for clone(3); call it using > syscall(2). [...] "clone3()" is probably what was intended. Regards, Branden [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-26 2:28 ` G. Branden Robinson @ 2019-10-31 6:06 ` Michael Kerrisk (man-pages) 0 siblings, 0 replies; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-10-31 6:06 UTC (permalink / raw) To: G. Branden Robinson; +Cc: mtk.manpages, linux-man Hi Branden, On 10/26/19 4:28 AM, G. Branden Robinson wrote: > At 2019-10-25T18:59:31+0200, Michael Kerrisk (man-pages) wrote: > [...] >> clone() clone(3) Notes > [...] >> Glibc does not provide a wrapper for clone(3); call it using >> syscall(2). > [...] > > "clone3()" is probably what was intended. Thanks. I happened to already notice and fix this. Cheers, Michael ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) 2019-10-25 17:07 ` Christian Brauner 2019-10-26 2:28 ` G. Branden Robinson @ 2019-10-28 15:12 ` Jann Horn 2019-10-28 17:21 ` Christian Brauner 2019-11-07 15:19 ` Christian Brauner 2019-11-11 15:03 ` Florian Weimer 4 siblings, 1 reply; 30+ messages in thread From: Jann Horn @ 2019-10-28 15:12 UTC (permalink / raw) To: Michael Kerrisk-manpages Cc: Christian Brauner, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Fri, Oct 25, 2019 at 6:59 PM Michael Kerrisk (man-pages) <mtk.manpages@gmail.com> wrote: > I've made a first shot at adding documentation for clone3(). You can > see the diff here: > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 [...] > clone3() > The clone3() system call provides a superset of the functionality > of the older clone() interface. It also provides a number of API > improvements, including: space for additional flags bits; cleaner > separation in the use of various arguments; and the ability to > specify the size of the child's stack area. You might want to note somewhere that its flags can't be seccomp-filtered because they're stored in memory, making it inappropriate to use in heavily sandboxed processes. > struct clone_args { > u64 flags; /* Flags bit mask */ > u64 pidfd; /* Where to store PID file descriptor > (int *) */ > u64 child_tid; /* Where to store child TID, > in child's memory (int *) */ > u64 parent_tid; /* Where to store child TID, > in parent's memory (int *) */ > u64 exit_signal; /* Signal to deliver to parent on > child termination */ > u64 stack; /* Pointer to lowest byte of stack */ > u64 stack_size; /* Size of stack */ > u64 tls; /* Location of new TLS */ > }; > > The size argument that is supplied to clone3() should be initial‐ > ized to the size of this structure. (The existence of the size > argument permits future extensions to the clone_args structure.) > > The stack for the child process is specified via cl_args.stack, > which points to the lowest byte of the stack area, and Here and in the comment in the struct above, you say that .stack "points to the lowest byte of the stack area", but isn't that architecture-dependent? For most architectures, I think it should instead be "is the initial stack pointer", with the exception of IA64 (and maybe others, I'm not sure). For example, on X86, when launching a thread with an initially empty stack, it points directly *after* the end of the stack area. > cl_args.stack_size, which specifies the size of the stack in > bytes. In the case where the CLONE_VM flag (see below) is speci‐ stack_size is ignored on most architectures. > fied, a stack must be explicitly allocated and specified. Other‐ > wise, these two fields can be specified as NULL and 0, which > causes the child to use the same stack area as the parent (in the > child's own virtual address space). [...] > Equivalence between clone() and clone3() arguments > Unlike the older clone() interface, where arguments are passed > individually, in the newer clone3() interface the arguments are > packaged into the clone_args structure shown above. This struc‐ > ture allows for a superset of the information passed via the > clone() arguments. > > The following table shows the equivalence between the arguments of > clone() and the fields in the clone_args argument supplied to > clone3(): > > clone() clone(3) Notes > cl_args field > flags & ~0xff flags > parent_tid pidfd See CLONE_PIDFD > child_tid child_tid See CLONE_CHILD_SETTID > parent_tid parent_tid See CLONE_PARENT_SETTID > flags & 0xff exit_signal > stack stack > > --- stack_size (except that on ia64, stack_size also exists in clone2(), and if you're not on ia64, stack_size doesn't do anything, at least on X86, so showing them side by side like this doesn't really make sense) ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-28 15:12 ` Jann Horn @ 2019-10-28 17:21 ` Christian Brauner 2019-10-28 19:09 ` Jann Horn 0 siblings, 1 reply; 30+ messages in thread From: Christian Brauner @ 2019-10-28 17:21 UTC (permalink / raw) To: Jann Horn Cc: Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Mon, Oct 28, 2019 at 04:12:09PM +0100, Jann Horn wrote: > On Fri, Oct 25, 2019 at 6:59 PM Michael Kerrisk (man-pages) > <mtk.manpages@gmail.com> wrote: > > I've made a first shot at adding documentation for clone3(). You can > > see the diff here: > > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > [...] > > clone3() > > The clone3() system call provides a superset of the functionality > > of the older clone() interface. It also provides a number of API > > improvements, including: space for additional flags bits; cleaner > > separation in the use of various arguments; and the ability to > > specify the size of the child's stack area. > > You might want to note somewhere that its flags can't be > seccomp-filtered because they're stored in memory, making it > inappropriate to use in heavily sandboxed processes. Hm, I don't think that belongs on the clone manpage. Granted that process creation is an important syscall but so are a bunch of others that aren't filterable because of pointer arguments. We can probably mention on the seccomp manpage that seccomp can't filter on pointer arguments and then provide a list of examples. If you setup a seccomp filter and don't know that you can't filter syscalls with pointer args that seems pretty bad to begin with. > > > struct clone_args { > > u64 flags; /* Flags bit mask */ > > u64 pidfd; /* Where to store PID file descriptor > > (int *) */ > > u64 child_tid; /* Where to store child TID, > > in child's memory (int *) */ > > u64 parent_tid; /* Where to store child TID, > > in parent's memory (int *) */ > > u64 exit_signal; /* Signal to deliver to parent on > > child termination */ > > u64 stack; /* Pointer to lowest byte of stack */ > > u64 stack_size; /* Size of stack */ > > u64 tls; /* Location of new TLS */ > > }; > > > > The size argument that is supplied to clone3() should be initial‐ > > ized to the size of this structure. (The existence of the size > > argument permits future extensions to the clone_args structure.) > > > > The stack for the child process is specified via cl_args.stack, > > which points to the lowest byte of the stack area, and > > Here and in the comment in the struct above, you say that .stack > "points to the lowest byte of the stack area", but isn't that > architecture-dependent? For most architectures, I think it should > instead be "is the initial stack pointer", with the exception of IA64 > (and maybe others, I'm not sure). For example, on X86, when launching > a thread with an initially empty stack, it points directly *after* the > end of the stack area. re arch and stack_size: You mentioned ia64 below (I snipped this part.) but it's not the only one. With legacy clone it's _passed_ for any architecture that has CONFIG_CLONE_BACKWARDS3. That includes at least microblaze and ia64 I think. But only ia64 makes _actual use_ of this in copy_thread() by doing user_stack_base + user_stack_size - 16. I think ia64 only needs stack_size because of the split page-table layout where two stacks grow in different directions; so the stack doesn't grow dynamically. Afair, stack_size is mainly used when PF_KTHREAD is true but that can't be set from userspace anyway, so _shrug_. One thing I never liked about clone() was that userspace had to know about stack direction. And there is a lot of ugly code in userspace that has nasty clone() wrappers like: pid_t wrap_clone(int (*fn)(void *), void *arg, int flags, int *pidfd) { pid_t ret; void *stack; stack = malloc(__STACK_SIZE); if (!stack) { SYSERROR("Failed to allocate clone stack"); return -ENOMEM; } #ifdef __ia64__ ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd); #else ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd); #endif return ret; } where stack + stack_size is addition on a void pointer which usually clang and gcc are not very happy about. I wanted to bring this up on the mailing list soon: If possible, I don't want userspace to need to know about stack direction and just have stack point to the beginning and then have the kernel do the + stack_size after the copy_clone_args_from_user() if the arch needs it. For example, by having a dumb helder similar to copy_thread_tls()/coyp_thread() that either does the + stack_size or not. Right now, clone3() is supported on parisc and afaict, the stack grows upwards for it. I'm not sure if there are obvious reasons why that won't work or it would be a bad idea... Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-28 17:21 ` Christian Brauner @ 2019-10-28 19:09 ` Jann Horn 2019-10-29 11:27 ` Christian Brauner 0 siblings, 1 reply; 30+ messages in thread From: Jann Horn @ 2019-10-28 19:09 UTC (permalink / raw) To: Christian Brauner Cc: Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Mon, Oct 28, 2019 at 6:21 PM Christian Brauner <christian.brauner@ubuntu.com> wrote: > On Mon, Oct 28, 2019 at 04:12:09PM +0100, Jann Horn wrote: > > On Fri, Oct 25, 2019 at 6:59 PM Michael Kerrisk (man-pages) > > <mtk.manpages@gmail.com> wrote: > > > I've made a first shot at adding documentation for clone3(). You can > > > see the diff here: > > > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 [...] > > You might want to note somewhere that its flags can't be > > seccomp-filtered because they're stored in memory, making it > > inappropriate to use in heavily sandboxed processes. > > Hm, I don't think that belongs on the clone manpage. Granted that > process creation is an important syscall but so are a bunch of others > that aren't filterable because of pointer arguments. > We can probably mention on the seccomp manpage that seccomp can't filter > on pointer arguments and then provide a list of examples. If you setup a > seccomp filter and don't know that you can't filter syscalls with > pointer args that seems pretty bad to begin with. Fair enough. [...] > One thing I never liked about clone() was that userspace had to know > about stack direction. And there is a lot of ugly code in userspace that > has nasty clone() wrappers like: [...] > where stack + stack_size is addition on a void pointer which usually > clang and gcc are not very happy about. > I wanted to bring this up on the mailing list soon: If possible, I don't > want userspace to need to know about stack direction and just have stack > point to the beginning and then have the kernel do the + stack_size > after the copy_clone_args_from_user() if the arch needs it. For example, > by having a dumb helder similar to copy_thread_tls()/coyp_thread() that > either does the + stack_size or not. Right now, clone3() is supported on > parisc and afaict, the stack grows upwards for it. I'm not sure if there > are obvious reasons why that won't work or it would be a bad idea... That would mean adding a new clone flag that redefines how those parameters work and describing the current behavior in the manpage as the behavior without the flag (which doesn't exist on 5.3), right? ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-28 19:09 ` Jann Horn @ 2019-10-29 11:27 ` Christian Brauner 2019-10-29 14:26 ` Christian Brauner 0 siblings, 1 reply; 30+ messages in thread From: Christian Brauner @ 2019-10-29 11:27 UTC (permalink / raw) To: Jann Horn Cc: Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Florian Weimer, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Mon, Oct 28, 2019 at 08:09:13PM +0100, Jann Horn wrote: > On Mon, Oct 28, 2019 at 6:21 PM Christian Brauner > <christian.brauner@ubuntu.com> wrote: > > On Mon, Oct 28, 2019 at 04:12:09PM +0100, Jann Horn wrote: > > > On Fri, Oct 25, 2019 at 6:59 PM Michael Kerrisk (man-pages) > > > <mtk.manpages@gmail.com> wrote: > > > > I've made a first shot at adding documentation for clone3(). You can > > > > see the diff here: > > > > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > [...] > > > You might want to note somewhere that its flags can't be > > > seccomp-filtered because they're stored in memory, making it > > > inappropriate to use in heavily sandboxed processes. > > > > Hm, I don't think that belongs on the clone manpage. Granted that > > process creation is an important syscall but so are a bunch of others > > that aren't filterable because of pointer arguments. > > We can probably mention on the seccomp manpage that seccomp can't filter > > on pointer arguments and then provide a list of examples. If you setup a > > seccomp filter and don't know that you can't filter syscalls with > > pointer args that seems pretty bad to begin with. > > Fair enough. > > [...] > > One thing I never liked about clone() was that userspace had to know > > about stack direction. And there is a lot of ugly code in userspace that > > has nasty clone() wrappers like: > [...] > > where stack + stack_size is addition on a void pointer which usually > > clang and gcc are not very happy about. > > I wanted to bring this up on the mailing list soon: If possible, I don't > > want userspace to need to know about stack direction and just have stack > > point to the beginning and then have the kernel do the + stack_size > > after the copy_clone_args_from_user() if the arch needs it. For example, > > by having a dumb helder similar to copy_thread_tls()/coyp_thread() that > > either does the + stack_size or not. Right now, clone3() is supported on > > parisc and afaict, the stack grows upwards for it. I'm not sure if there > > are obvious reasons why that won't work or it would be a bad idea... > > That would mean adding a new clone flag that redefines how those > parameters work and describing the current behavior in the manpage as > the behavior without the flag (which doesn't exist on 5.3), right? I would break API and if someone reports breakage we'll revert and go the more complicated route you outlined (see [1]). But I don't think it will a big deal. First, we haven't documented how stack needs to be passed so who knows what people currently do. Second, clone3() has not been out for a long time and currently does _not_ provide features that legacy clone() does not provide apart from a cleaner interface. So userspace has no incentive to use clone3() over clone() right now. That'll change latest with v5.5 where we have new features on top of clone3() (CLONE_CLEAR_SIGHAND). So let's just try and fix it. [1]: This is basically what Linus has repeatedly said: it's not about never breaking api in principle but rather about whether this breaks someones usecase. And if it does break, we need to revert. Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-29 11:27 ` Christian Brauner @ 2019-10-29 14:26 ` Christian Brauner 2019-10-29 14:36 ` Florian Weimer 2019-10-29 15:20 ` Jann Horn 0 siblings, 2 replies; 30+ messages in thread From: Christian Brauner @ 2019-10-29 14:26 UTC (permalink / raw) To: Jann Horn, Florian Weimer Cc: Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Tue, Oct 29, 2019 at 12:27:07PM +0100, Christian Brauner wrote: > On Mon, Oct 28, 2019 at 08:09:13PM +0100, Jann Horn wrote: > > On Mon, Oct 28, 2019 at 6:21 PM Christian Brauner > > <christian.brauner@ubuntu.com> wrote: > > > On Mon, Oct 28, 2019 at 04:12:09PM +0100, Jann Horn wrote: > > > > On Fri, Oct 25, 2019 at 6:59 PM Michael Kerrisk (man-pages) > > > > <mtk.manpages@gmail.com> wrote: > > > > > I've made a first shot at adding documentation for clone3(). You can > > > > > see the diff here: > > > > > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > > [...] > > > > You might want to note somewhere that its flags can't be > > > > seccomp-filtered because they're stored in memory, making it > > > > inappropriate to use in heavily sandboxed processes. > > > > > > Hm, I don't think that belongs on the clone manpage. Granted that > > > process creation is an important syscall but so are a bunch of others > > > that aren't filterable because of pointer arguments. > > > We can probably mention on the seccomp manpage that seccomp can't filter > > > on pointer arguments and then provide a list of examples. If you setup a > > > seccomp filter and don't know that you can't filter syscalls with > > > pointer args that seems pretty bad to begin with. > > > > Fair enough. > > > > [...] > > > One thing I never liked about clone() was that userspace had to know > > > about stack direction. And there is a lot of ugly code in userspace that > > > has nasty clone() wrappers like: > > [...] > > > where stack + stack_size is addition on a void pointer which usually > > > clang and gcc are not very happy about. > > > I wanted to bring this up on the mailing list soon: If possible, I don't > > > want userspace to need to know about stack direction and just have stack > > > point to the beginning and then have the kernel do the + stack_size > > > after the copy_clone_args_from_user() if the arch needs it. For example, > > > by having a dumb helder similar to copy_thread_tls()/coyp_thread() that > > > either does the + stack_size or not. Right now, clone3() is supported on > > > parisc and afaict, the stack grows upwards for it. I'm not sure if there > > > are obvious reasons why that won't work or it would be a bad idea... > > > > That would mean adding a new clone flag that redefines how those > > parameters work and describing the current behavior in the manpage as > > the behavior without the flag (which doesn't exist on 5.3), right? > > I would break API and if someone reports breakage we'll revert and go > the more complicated route you outlined (see [1]). @Jann, I think the following patch might even be enough?... @Florian, do you have an opinion about always passing the stack from the lowest address with clone3()? From 72b2a5711fd37e34e87df1b29b2e1885bb28cf75 Mon Sep 17 00:00:00 2001 From: Christian Brauner <christian.brauner@ubuntu.com> Date: Tue, 29 Oct 2019 13:55:39 +0100 Subject: [PATCH] fork: stack direction Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> --- kernel/fork.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/kernel/fork.c b/kernel/fork.c index bcdf53125210..22dc72071a6d 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -2584,6 +2584,13 @@ static bool clone3_args_valid(const struct kernel_clone_args *kargs) return true; } +static inline void clone3_prepare_stack(struct kernel_clone_args *kargs) +{ +#if !defined(CONFIG_STACK_GROWSUP) && !defined(CONFIG_IA64) + kargs->stack += kargs->stack_size; +#endif +} + /** * clone3 - create a new process with specific properties * @uargs: argument structure @@ -2605,6 +2612,8 @@ SYSCALL_DEFINE2(clone3, struct clone_args __user *, uargs, size_t, size) if (err) return err; + clone3_prepare_stack(&kargs); + if (!clone3_args_valid(&kargs)) return -EINVAL; -- 2.23.0 ^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-29 14:26 ` Christian Brauner @ 2019-10-29 14:36 ` Florian Weimer 2019-10-29 16:04 ` Christian Brauner 2019-10-29 15:20 ` Jann Horn 1 sibling, 1 reply; 30+ messages in thread From: Florian Weimer @ 2019-10-29 14:36 UTC (permalink / raw) To: Christian Brauner Cc: Jann Horn, Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API * Christian Brauner: > @Florian, do you have an opinion about always passing the stack from the > lowest address with clone3()? Do you mean that the stack extends from stack to stack_size? I guess that makes sense. What about architectures which need two stacks (I think ia64 is one)? There is also the matter whose responsibility is the alignment of the initial stack pointer. Thanks, Florian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-29 14:36 ` Florian Weimer @ 2019-10-29 16:04 ` Christian Brauner 0 siblings, 0 replies; 30+ messages in thread From: Christian Brauner @ 2019-10-29 16:04 UTC (permalink / raw) To: Florian Weimer Cc: Jann Horn, Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Tue, Oct 29, 2019 at 03:36:37PM +0100, Florian Weimer wrote: > * Christian Brauner: > > > @Florian, do you have an opinion about always passing the stack from the > > lowest address with clone3()? > > Do you mean that the stack extends from stack to stack_size? I guess Specifically, that userspace doesn't need to know whether it needs to pass stack or stack + stack_size. The kernel will just do the stack + stack_size if the architecture has a downwards growing stack. So for _all_ architectures, ia64 or not, you'd always pass: void *p[PAGE_SIZE]; struct clone_args args = { .stack = p, .stack_size = PAGE_SIZE, }; > that makes sense. What about architectures which need two stacks (I > think ia64 is one)? I don't think ia64 needs any special treament. ia64 requires you to pass the lowest address of the stack and the kernel does the additon to reach the top of the stack and the alignemnt too. So ia64 _in the kernel_ currently does: arch/ia64/kernel/entry.S:sys_clone2() - setup stack and stack size and call into do_fork() -> kernel/fork.c:do_fork() -> copy_thread_tls() -> arch/ia64/kernel/process.c:copy_thread(): if (user_stack_base) { child_ptregs->r12 = user_stack_base + user_stack_size - 16; child_ptregs->ar_bspstore = user_stack_base; child_ptregs->ar_rnat = 0; child_ptregs->loadrs = 0; } > There is also the matter whose responsibility is the alignment of the > initial stack pointer. Hm, probably also a detail that userspace shouldn't need to know about? Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-29 14:26 ` Christian Brauner 2019-10-29 14:36 ` Florian Weimer @ 2019-10-29 15:20 ` Jann Horn 2019-10-29 16:05 ` Christian Brauner 1 sibling, 1 reply; 30+ messages in thread From: Jann Horn @ 2019-10-29 15:20 UTC (permalink / raw) To: Christian Brauner Cc: Florian Weimer, Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Tue, Oct 29, 2019 at 3:26 PM Christian Brauner <christian.brauner@ubuntu.com> wrote: > On Tue, Oct 29, 2019 at 12:27:07PM +0100, Christian Brauner wrote: > > On Mon, Oct 28, 2019 at 08:09:13PM +0100, Jann Horn wrote: > > > On Mon, Oct 28, 2019 at 6:21 PM Christian Brauner > > > <christian.brauner@ubuntu.com> wrote: > > > > where stack + stack_size is addition on a void pointer which usually > > > > clang and gcc are not very happy about. > > > > I wanted to bring this up on the mailing list soon: If possible, I don't > > > > want userspace to need to know about stack direction and just have stack > > > > point to the beginning and then have the kernel do the + stack_size > > > > after the copy_clone_args_from_user() if the arch needs it. For example, > > > > by having a dumb helder similar to copy_thread_tls()/coyp_thread() that > > > > either does the + stack_size or not. Right now, clone3() is supported on > > > > parisc and afaict, the stack grows upwards for it. I'm not sure if there > > > > are obvious reasons why that won't work or it would be a bad idea... > > > > > > That would mean adding a new clone flag that redefines how those > > > parameters work and describing the current behavior in the manpage as > > > the behavior without the flag (which doesn't exist on 5.3), right? > > > > I would break API and if someone reports breakage we'll revert and go > > the more complicated route you outlined (see [1]). > > @Jann, I think the following patch might even be enough?... [...] > +static inline void clone3_prepare_stack(struct kernel_clone_args *kargs) > +{ > +#if !defined(CONFIG_STACK_GROWSUP) && !defined(CONFIG_IA64) > + kargs->stack += kargs->stack_size; > +#endif > +} I guess it might work as long as nobody is actually using clone3 yet and you can get this patch into the 5.3 stable tree and any distro kernels on 5.3 before people do start using clone3? ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-29 15:20 ` Jann Horn @ 2019-10-29 16:05 ` Christian Brauner 0 siblings, 0 replies; 30+ messages in thread From: Christian Brauner @ 2019-10-29 16:05 UTC (permalink / raw) To: Jann Horn Cc: Florian Weimer, Michael Kerrisk-manpages, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Tue, Oct 29, 2019 at 04:20:37PM +0100, Jann Horn wrote: > On Tue, Oct 29, 2019 at 3:26 PM Christian Brauner > <christian.brauner@ubuntu.com> wrote: > > On Tue, Oct 29, 2019 at 12:27:07PM +0100, Christian Brauner wrote: > > > On Mon, Oct 28, 2019 at 08:09:13PM +0100, Jann Horn wrote: > > > > On Mon, Oct 28, 2019 at 6:21 PM Christian Brauner > > > > <christian.brauner@ubuntu.com> wrote: > > > > > where stack + stack_size is addition on a void pointer which usually > > > > > clang and gcc are not very happy about. > > > > > I wanted to bring this up on the mailing list soon: If possible, I don't > > > > > want userspace to need to know about stack direction and just have stack > > > > > point to the beginning and then have the kernel do the + stack_size > > > > > after the copy_clone_args_from_user() if the arch needs it. For example, > > > > > by having a dumb helder similar to copy_thread_tls()/coyp_thread() that > > > > > either does the + stack_size or not. Right now, clone3() is supported on > > > > > parisc and afaict, the stack grows upwards for it. I'm not sure if there > > > > > are obvious reasons why that won't work or it would be a bad idea... > > > > > > > > That would mean adding a new clone flag that redefines how those > > > > parameters work and describing the current behavior in the manpage as > > > > the behavior without the flag (which doesn't exist on 5.3), right? > > > > > > I would break API and if someone reports breakage we'll revert and go > > > the more complicated route you outlined (see [1]). > > > > @Jann, I think the following patch might even be enough?... > [...] > > +static inline void clone3_prepare_stack(struct kernel_clone_args *kargs) > > +{ > > +#if !defined(CONFIG_STACK_GROWSUP) && !defined(CONFIG_IA64) > > + kargs->stack += kargs->stack_size; > > +#endif > > +} > > I guess it might work as long as nobody is actually using clone3 yet > and you can get this patch into the 5.3 stable tree and any distro > kernels on 5.3 before people do start using clone3? Yes, that would be my preferred approach. As I said doing it this way is pretty common. A recent example where we did this is the file_max sysctl. Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) ` (2 preceding siblings ...) 2019-10-28 15:12 ` Jann Horn @ 2019-11-07 15:19 ` Christian Brauner 2019-11-07 16:10 ` Florian Weimer 2019-11-09 8:09 ` Michael Kerrisk (man-pages) 2019-11-11 15:03 ` Florian Weimer 4 siblings, 2 replies; 30+ messages in thread From: Christian Brauner @ 2019-11-07 15:19 UTC (permalink / raw) To: Michael Kerrisk (man-pages), Florian Weimer Cc: Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: > Hello Christian and all, > > I've made a first shot at adding documentation for clone3(). You can > see the diff here: > https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 > > In the end, I decided that the most straightforward approach was to > add the documentation as part of the existing clone(2) page. This has > the advantage of avoiding duplication of information across two pages, > and perhaps also makes it easier to see the commonality of the two > APIs. > > Because the new text is integrated into the existing page, I think it > makes most sense to just show that page text for review purposes. I > welcome input on the below. > > The notable changes are: > * In the first part of the page, up to and including the paragraph > with the subheading "The flags bit mask" > * Minor changes in the description of CLONE_CHILD_CLEARTID, > CLONE_CHILD_SETTID, CLONE_PARENT_SETTID, and CLONE_PIDFD, to reflect > the argument differences between clone() and clone2() (Fyi, I think you meant to write clone3()here. clone2() is specific to ia64.) > > Most of the resy of page is unchanged. > > I welcome fixes, suggestions for improvements, etc. > > Thanks, > > Michael > > CLONE(2) Linux Programmer's Manual CLONE(2) > > NAME > clone, __clone2 - create a child process Should this include clone3()? > > SYNOPSIS > /* Prototype for the glibc wrapper function */ > > #define _GNU_SOURCE > #include <sched.h> > > int clone(int (*fn)(void *), void *stack, int flags, void *arg, ... > /* pid_t *parent_tid, void *tls, pid_t *child_tid */ ); I've always been confused by the "..." for the glibc wrapper. The glibc prototype in bits/sched.h also looks like this: extern int clone (int (*__fn) (void *__arg), void *__child_stack, int __flags, void *__arg, ...) __THROW; The additionl args parent_tid, tls, and child_tid are present in _all_ clone version in the same order. In fact the glibc wrapper here give the illusion that it's parent_tid, tls, child_tid. The underlying syscall has a different order parent_tidptr, child_tidptr, tls. Florian, can you advise what prototype we should mention for the glibc clone() wrapper here. I'd like it to be as simple as possible and get rid of the ... Architectural differences are explained in detail below anyway. > > /* For the prototype of the raw clone() system call, see NOTES */ > > long clone3(struct clone_args *cl_args, size_t size); > > Note: There is not yet a glibc wrapper for clone3(); see NOTES. > > DESCRIPTION > These system calls create a new process, in a manner similar to > fork(2). > > Unlike fork(2), these system calls allow the child process to > share parts of its execution context with the calling process, Hm, sharing part of the execution context is not the only thing that clone{3}() does. Maybe something like: Unlike fork(2), these system calls allow to create a child process with different properties than its parent. For example, these syscalls allow the child to share various parts of the execution context with the calling process such as [...]. They also allow placing the process in a new set of namespaces. Just a thought. > such as the virtual address space, the table of file descriptors, > and the table of signal handlers. (Note that on this manual page, > "calling process" normally corresponds to "parent process". But > see the description of CLONE_PARENT below.) > > This page describes the following interfaces: > > * The glibc clone() wrapper function and the underlying system > call on which it is based. The main text describes the wrapper > function; the differences for the raw system call are described > toward the end of this page. > > * The newer clone3() system call. > > The clone() wrapper function > When the child process is created with the clone() wrapper func‐ > tion, it commences execution by calling the function pointed to by > the argument fn. (This differs from fork(2), where execution con‐ > tinues in the child from the point of the fork(2) call.) The arg > argument is passed as the argument of the function fn. > > When the fn(arg) function returns, the child process terminates. > The integer returned by fn is the exit status for the child > process. The child process may also terminate explicitly by call‐ > ing exit(2) or after receiving a fatal signal. > > The stack argument specifies the location of the stack used by the > child process. Since the child and calling process may share mem‐ > ory, it is not possible for the child process to execute in the > same stack as the calling process. The calling process must > therefore set up memory space for the child stack and pass a > pointer to this space to clone(). Stacks grow downward on all It might be a good idea to advise people to use mmap() to create a stack. The "canonical" way of doing this would usually be something like #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); (Yes, the MAP_STACK is usally a noop but people should always include it in case some arch will have weird alignment requirement in which case this flag can be changed to actually do something...) > processors that run Linux (except the HP PA processors), so stack > usually points to the topmost address of the memory space set up > for the child stack. Note that clone() does not provide a means > whereby the caller can inform the kernel of the size of the stack > area. > > The remaining arguments to clone() are discussed below. > > clone3() > The clone3() system call provides a superset of the functionality > of the older clone() interface. It also provides a number of API Technically, clone3() currently provides the same functionality as clone() it just has (hopefully) saner semantics, i.e. where as clone() _silently_ ignores unknown options clone3() will reject them with EINVAL (e.g. CSIGNAL and CLONE_DETACHED). But it's good enough and will be true with v5.5 > improvements, including: space for additional flags bits; cleaner > separation in the use of various arguments; and the ability to > specify the size of the child's stack area. > > As with fork(2), clone3() returns in both the parent and the > child. It returns 0 in the child process and returns the PID of > the child in the parent. > > The cl_args argument of clone3() is a structure of the following > form: > > struct clone_args { > u64 flags; /* Flags bit mask */ > u64 pidfd; /* Where to store PID file descriptor > (int *) */ > u64 child_tid; /* Where to store child TID, > in child's memory (int *) */ > u64 parent_tid; /* Where to store child TID, > in parent's memory (int *) */ > u64 exit_signal; /* Signal to deliver to parent on > child termination */ > u64 stack; /* Pointer to lowest byte of stack */ > u64 stack_size; /* Size of stack */ > u64 tls; /* Location of new TLS */ > }; > > The size argument that is supplied to clone3() should be initial‐ > ized to the size of this structure. (The existence of the size > argument permits future extensions to the clone_args structure.) > > The stack for the child process is specified via cl_args.stack, > which points to the lowest byte of the stack area, and > cl_args.stack_size, which specifies the size of the stack in > bytes. In the case where the CLONE_VM flag (see below) is speci‐ This is now actually true. :) > fied, a stack must be explicitly allocated and specified. Other‐ > wise, these two fields can be specified as NULL and 0, which > causes the child to use the same stack area as the parent (in the > child's own virtual address space). > > The remaining fields in the cl_args argument are discussed below. > > Equivalence between clone() and clone3() arguments > Unlike the older clone() interface, where arguments are passed > individually, in the newer clone3() interface the arguments are > packaged into the clone_args structure shown above. This struc‐ > ture allows for a superset of the information passed via the > clone() arguments. > > The following table shows the equivalence between the arguments of > clone() and the fields in the clone_args argument supplied to > clone3(): > > clone() clone(3) Notes > cl_args field > flags & ~0xff flags CLONE_DETACHED doesn't work. > parent_tid pidfd See CLONE_PIDFD > child_tid child_tid See CLONE_CHILD_SETTID > parent_tid parent_tid See CLONE_PARENT_SETTID > flags & 0xff exit_signal > stack stack > > --- stack_size posterity: Apart from microblaze and ia64's clone2() which both have a stack_size argument. :) > tls tls See CLONE_SETTLS > > The child termination signal > When the child process terminates, a signal may be sent to the > parent. The termination signal is specified in the low byte of > flags (clone()) or in cl_args.exit_signal (clone3()). If this > signal is specified as anything other than SIGCHLD, then the par‐ > ent process must specify the __WALL or __WCLONE options when wait‐ > ing for the child with wait(2). If no signal (i.e., zero) is > specified, then the parent process is not signaled when the child > terminates. > > The flags bit mask > Both clone() and clone3() allow a flags bit mask that modifies > their behavior and allows the caller to specify what is shared > between the calling process and the child process. This bit mask > is specified as a bitwise-OR of zero or more of the constants > listed below. Except as otherwise noted below, these flags are > available (and have the same effect) in both clone() and clone3(). > > CLONE_CHILD_CLEARTID (since Linux 2.5.49) > Clear (zero) the child thread ID at the location pointed to > by child_tid (clone()) or cl_args.child_tid (clone3()) in > child memory when the child exits, and do a wakeup on the > futex at that address. The address involved may be changed > by the set_tid_address(2) system call. This is used by > threading libraries. > > CLONE_CHILD_SETTID (since Linux 2.5.49) > Store the child thread ID at the location pointed to by > child_tid (clone()) or cl_args.child_tid (clone3()) in the > child's memory. The store operation completes before > clone() returns control to user space in the child process. > (Note that the store operation may not have completed > before clone() returns in the parent process, which will be > relevant if the CLONE_VM flag is also employed.) > > CLONE_FILES (since Linux 2.0) > If CLONE_FILES is set, the calling process and the child > process share the same file descriptor table. Any file > descriptor created by the calling process or by the child > process is also valid in the other process. Similarly, if > one of the processes closes a file descriptor, or changes > its associated flags (using the fcntl(2) F_SETFD opera‐ > tion), the other process is also affected. If a process > sharing a file descriptor table calls execve(2), its file > descriptor table is duplicated (unshared). > > If CLONE_FILES is not set, the child process inherits a > copy of all file descriptors opened in the calling process > at the time of clone(). Subsequent operations that open or > close file descriptors, or change file descriptor flags, > performed by either the calling process or the child > process do not affect the other process. Note, however, > that the duplicated file descriptors in the child refer to > the same open file descriptions as the corresponding file > descriptors in the calling process, and thus share file > offsets and file status flags (see open(2)). > > CLONE_FS (since Linux 2.0) > If CLONE_FS is set, the caller and the child process share > the same filesystem information. This includes the root of > the filesystem, the current working directory, and the > umask. Any call to chroot(2), chdir(2), or umask(2) per‐ > formed by the calling process or the child process also > affects the other process. > > If CLONE_FS is not set, the child process works on a copy > of the filesystem information of the calling process at the > time of the clone() call. Calls to chroot(2), chdir(2), or > umask(2) performed later by one of the processes do not > affect the other process. > > CLONE_IO (since Linux 2.6.25) > If CLONE_IO is set, then the new process shares an I/O con‐ > text with the calling process. If this flag is not set, > then (as with fork(2)) the new process has its own I/O con‐ > text. > > The I/O context is the I/O scope of the disk scheduler > (i.e., what the I/O scheduler uses to model scheduling of a > process's I/O). If processes share the same I/O context, > they are treated as one by the I/O scheduler. As a conse‐ > quence, they get to share disk time. For some I/O sched‐ > ulers, if two processes share an I/O context, they will be > allowed to interleave their disk access. If several > threads are doing I/O on behalf of the same process > (aio_read(3), for instance), they should employ CLONE_IO to > get better I/O performance. > > If the kernel is not configured with the CONFIG_BLOCK > option, this flag is a no-op. > > CLONE_NEWCGROUP (since Linux 4.6) > Create the process in a new cgroup namespace. If this flag > is not set, then (as with fork(2)) the process is created > in the same cgroup namespaces as the calling process. This > flag is intended for the implementation of containers. > > For further information on cgroup namespaces, see > cgroup_namespaces(7). > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWCGROUP. > > CLONE_NEWIPC (since Linux 2.6.19) > If CLONE_NEWIPC is set, then create the process in a new > IPC namespace. If this flag is not set, then (as with > fork(2)), the process is created in the same IPC namespace > as the calling process. This flag is intended for the > implementation of containers. > > An IPC namespace provides an isolated view of System V IPC > objects (see sysvipc(7)) and (since Linux 2.6.30) POSIX > message queues (see mq_overview(7)). The common character‐ > istic of these IPC mechanisms is that IPC objects are iden‐ > tified by mechanisms other than filesystem pathnames. > > Objects created in an IPC namespace are visible to all > other processes that are members of that namespace, but are > not visible to processes in other IPC namespaces. > > When an IPC namespace is destroyed (i.e., when the last > process that is a member of the namespace terminates), all > IPC objects in the namespace are automatically destroyed. > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWIPC. This flag can't be specified in conjunction > with CLONE_SYSVSEM. > > For further information on IPC namespaces, see names‐ > paces(7). > > CLONE_NEWNET (since Linux 2.6.24) > (The implementation of this flag was completed only by > about kernel version 2.6.29.) > > If CLONE_NEWNET is set, then create the process in a new > network namespace. If this flag is not set, then (as with > fork(2)) the process is created in the same network names‐ > pace as the calling process. This flag is intended for the > implementation of containers. > > A network namespace provides an isolated view of the net‐ > working stack (network device interfaces, IPv4 and IPv6 > protocol stacks, IP routing tables, firewall rules, the > /proc/net and /sys/class/net directory trees, sockets, > etc.). A physical network device can live in exactly one > network namespace. A virtual network (veth(4)) device pair > provides a pipe-like abstraction that can be used to create > tunnels between network namespaces, and can be used to cre‐ > ate a bridge to a physical network device in another names‐ > pace. > > When a network namespace is freed (i.e., when the last > process in the namespace terminates), its physical network > devices are moved back to the initial network namespace > (not to the parent of the process). For further informa‐ > tion on network namespaces, see namespaces(7). That's a lot of network namespace specific information, no? Maybe just point to man network_namespaces? > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWNET. > > CLONE_NEWNS (since Linux 2.4.19) > If CLONE_NEWNS is set, the cloned child is started in a new > mount namespace, initialized with a copy of the namespace > of the parent. If CLONE_NEWNS is not set, the child lives > in the same mount namespace as the parent. > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWNS. It is not permitted to specify both > CLONE_NEWNS and CLONE_FS in the same clone() call. Wait, I just realized that CLONE_FS has __different__ semantics in clone(2) than in unshare(2). That's crazy. unshare(2)'s basically ~CLONE_FS for clone2()... That deserves a big fat warning imho. At leats it's mentioned in the unshare(2) manpage. > > For further information on mount namespaces, see names‐ > paces(7) and mount_namespaces(7). > > CLONE_NEWPID (since Linux 2.6.24) > If CLONE_NEWPID is set, then create the process in a new > PID namespace. If this flag is not set, then (as with > fork(2)) the process is created in the same PID namespace > as the calling process. This flag is intended for the > implementation of containers. > > For further information on PID namespaces, see names‐ > paces(7) and pid_namespaces(7). > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWPID. This flag can't be specified in conjunction > with CLONE_THREAD or CLONE_PARENT. > > CLONE_NEWUSER > (This flag first became meaningful for clone() in Linux > 2.6.23, the current clone() semantics were merged in Linux > 3.5, and the final pieces to make the user namespaces com‐ > pletely usable were merged in Linux 3.8.) > > If CLONE_NEWUSER is set, then create the process in a new > user namespace. If this flag is not set, then (as with > fork(2)) the process is created in the same user namespace > as the calling process. > > Before Linux 3.8, use of CLONE_NEWUSER required that the > caller have three capabilities: CAP_SYS_ADMIN, CAP_SETUID, > and CAP_SETGID. Starting with Linux 3.8, no privileges are > needed to create a user namespace. > > This flag can't be specified in conjunction with > CLONE_THREAD or CLONE_PARENT. For security reasons, > CLONE_NEWUSER cannot be specified in conjunction with > CLONE_FS. > > For further information on user namespaces, see names‐ > paces(7) and user_namespaces(7). > > CLONE_NEWUTS (since Linux 2.6.19) > If CLONE_NEWUTS is set, then create the process in a new > UTS namespace, whose identifiers are initialized by dupli‐ > cating the identifiers from the UTS namespace of the call‐ > ing process. If this flag is not set, then (as with > fork(2)) the process is created in the same UTS namespace > as the calling process. This flag is intended for the > implementation of containers. > > A UTS namespace is the set of identifiers returned by > uname(2); among these, the domain name and the hostname can > be modified by setdomainname(2) and sethostname(2), respec‐ > tively. Changes made to the identifiers in a UTS namespace > are visible to all other processes in the same namespace, > but are not visible to processes in other UTS namespaces. Might again be a little too detailed but that's just my opinion. :) > > Only a privileged process (CAP_SYS_ADMIN) can employ > CLONE_NEWUTS. > > For further information on UTS namespaces, see names‐ > paces(7). > > CLONE_PARENT (since Linux 2.3.12) > If CLONE_PARENT is set, then the parent of the new child > (as returned by getppid(2)) will be the same as that of the > calling process. > > If CLONE_PARENT is not set, then (as with fork(2)) the > child's parent is the calling process. > > Note that it is the parent process, as returned by getp‐ > pid(2), which is signaled when the child terminates, so > that if CLONE_PARENT is set, then the parent of the calling > process, rather than the calling process itself, will be > signaled. > > CLONE_PARENT_SETTID (since Linux 2.5.49) > Store the child thread ID at the location pointed to by > parent_tid (clone()) or cl_args.child_tid (clone3()) in the > parent's memory. (In Linux 2.5.32-2.5.48 there was a flag > CLONE_SETTID that did this.) The store operation completes > before clone() returns control to user space. > > CLONE_PID (Linux 2.0 to 2.5.15) > If CLONE_PID is set, the child process is created with the > same process ID as the calling process. This is good for > hacking the system, but otherwise of not much use. From > Linux 2.3.21 onward, this flag could be specified only by > the system boot process (PID 0). The flag disappeared com‐ > pletely from the kernel sources in Linux 2.5.16. Since > then, the kernel silently ignores this bit if it is speci‐ > fied in flags. He, not true anymore. :) If Thomas' history tree is not lying to me than CLONE_PID used to be: #define CLONE_PID 0x00001000 /* set if pid shared */ which then got replaced with #define CLONE_IDLETASK 0x00001000 /* set if new pid should be 0 in 27568369be8c ("[PATCH] Hotplug CPU prep") CLONE_IDLETASK itself got removed in f4205a53c8f5 ("[PATCH] sched: consolidate CLONE_IDLETASK masking") And then CLONE_PIDFD took that bit. :) > > CLONE_PIDFD (since Linux 5.2) > If this flag is specified, a PID file descriptor referring > to the child process is allocated and placed at a specified > location in the parent's memory. The close-on-exec flag is > set on this new file descriptor. PID file descriptors can > be used for the purposes described in pidfd_open(2). > > * When using clone3(), the PID file descriptor is placed > at the location pointed to by cl_args.pidfd. > > * When using clone(), the PID file descriptor is placed at > the location pointed to by parent_tid. Since the par‐ > ent_tid argument is used to return the PID file descrip‐ > tor, CLONE_PIDFD cannot be used with CLONE_PARENT_SETTID > when calling clone(). > > It is currently not possible to use this flag together with > CLONE_THREAD. This means that the process identified by > the PID file descriptor will always be a thread-group > leader. > > For a while there was a CLONE_DETACHED flag. This flag is > usually ignored when passed along with other flags. How‐ > ever, when passed alongside CLONE_PIDFD, an error is > returned. This ensures that this flag can be reused for > further PID file descriptor features in the future. This section only applies to legacy clone(), i.e. legacy clone EINVALs you with CLONE_DETACHED | CLONE_PIDFD whereas clone3() EINVALS you for CLONE_DETACHED by itself. > > CLONE_PTRACE (since Linux 2.2) > If CLONE_PTRACE is specified, and the calling process is > being traced, then trace the child also (see ptrace(2)). > > CLONE_SETTLS (since Linux 2.5.32) > The TLS (Thread Local Storage) descriptor is set to tls. > > The interpretation of tls and the resulting effect is > architecture dependent. On x86, tls is interpreted as a > struct user_desc * (see set_thread_area(2)). On x86-64 it > is the new value to be set for the %fs base register (see > the ARCH_SET_FS argument to arch_prctl(2)). On architec‐ > tures with a dedicated TLS register, it is the new value of > that register. Probably a gentle warning that this is a very advanced option and usually should not be used by callers other than libraries implementing threading or with specific use cases directly. > > CLONE_SIGHAND (since Linux 2.0) > If CLONE_SIGHAND is set, the calling process and the child > process share the same table of signal handlers. If the > calling process or child process calls sigaction(2) to > change the behavior associated with a signal, the behavior > is changed in the other process as well. However, the > calling process and child processes still have distinct > signal masks and sets of pending signals. So, one of them > may block or unblock signals using sigprocmask(2) without > affecting the other process. > > If CLONE_SIGHAND is not set, the child process inherits a > copy of the signal handlers of the calling process at the > time clone() is called. Calls to sigaction(2) performed > later by one of the processes have no effect on the other > process. > > Since Linux 2.6.0, flags must also include CLONE_VM if > CLONE_SIGHAND is specified > > CLONE_STOPPED (since Linux 2.6.0) > If CLONE_STOPPED is set, then the child is initially > stopped (as though it was sent a SIGSTOP signal), and must > be resumed by sending it a SIGCONT signal. > > This flag was deprecated from Linux 2.6.25 onward, and was > removed altogether in Linux 2.6.38. Since then, the kernel > silently ignores it without error. Starting with Linux > 4.6, the same bit was reused for the CLONE_NEWCGROUP flag. > > CLONE_SYSVSEM (since Linux 2.5.10) > If CLONE_SYSVSEM is set, then the child and the calling > process share a single list of System V semaphore adjust‐ > ment (semadj) values (see semop(2)). In this case, the > shared list accumulates semadj values across all processes > sharing the list, and semaphore adjustments are performed > only when the last process that is sharing the list termi‐ > nates (or ceases sharing the list using unshare(2)). If > this flag is not set, then the child has a separate semadj > list that is initially empty. > > CLONE_THREAD (since Linux 2.4.0) > If CLONE_THREAD is set, the child is placed in the same > thread group as the calling process. To make the remainder > of the discussion of CLONE_THREAD more readable, the term > "thread" is used to refer to the processes within a thread > group. > > Thread groups were a feature added in Linux 2.4 to support > the POSIX threads notion of a set of threads that share a > single PID. Internally, this shared PID is the so-called > thread group identifier (TGID) for the thread group. Since > Linux 2.4, calls to getpid(2) return the TGID of the call‐ > er. > > The threads within a group can be distinguished by their > (system-wide) unique thread IDs (TID). A new thread's TID > is available as the function result returned to the caller > of clone(), and a thread can obtain its own TID using get‐ > tid(2). > > When a call is made to clone() without specifying > CLONE_THREAD, then the resulting thread is placed in a new > thread group whose TGID is the same as the thread's TID. > This thread is the leader of the new thread group. > > A new thread created with CLONE_THREAD has the same parent > process as the caller of clone() (i.e., like CLONE_PARENT), Nit: s/i.e.,/i.e./? > so that calls to getppid(2) return the same value for all > of the threads in a thread group. When a CLONE_THREAD > thread terminates, the thread that created it using clone() > is not sent a SIGCHLD (or other termination) signal; nor > can the status of such a thread be obtained using wait(2). > (The thread is said to be detached.) > > After all of the threads in a thread group terminate the > parent process of the thread group is sent a SIGCHLD (or > other termination) signal. > > If any of the threads in a thread group performs an > execve(2), then all threads other than the thread group > leader are terminated, and the new program is executed in s/is executed in/becomes the/? > the thread group leader. > > If one of the threads in a thread group creates a child > using fork(2), then any thread in the group can wait(2) for > that child. > > Since Linux 2.5.35, flags must also include CLONE_SIGHAND > if CLONE_THREAD is specified (and note that, since Linux > 2.6.0, CLONE_SIGHAND also requires CLONE_VM to be > included). > > Signal dispositions and actions are process-wide: if an > unhandled signal is delivered to a thread, then it will > affect (terminate, stop, continue, be ignored in) all mem‐ > bers of the thread group. > > Each thread has its own signal mask, as set by sigproc‐ > mask(2). > > A signal may be process-directed or thread-directed. A > process-directed signal is targeted at a thread group > (i.e., a TGID), and is delivered to an arbitrarily selected > thread from among those that are not blocking the signal. > A signal may be process-directed because it was generated > by the kernel for reasons other than a hardware exception, > or because it was sent using kill(2) or sigqueue(3). A > thread-directed signal is targeted at (i.e., delivered to) > a specific thread. A signal may be thread directed because > it was sent using tgkill(2) or pthread_sigqueue(3), or > because the thread executed a machine language instruction > that triggered a hardware exception (e.g., invalid memory > access triggering SIGSEGV or a floating-point exception > triggering SIGFPE). > > A call to sigpending(2) returns a signal set that is the > union of the pending process-directed signals and the sig‐ > nals that are pending for the calling thread. > > If a process-directed signal is delivered to a thread > group, and the thread group has installed a handler for the > signal, then the handler will be invoked in exactly one, > arbitrarily selected member of the thread group that has > not blocked the signal. If multiple threads in a group are > waiting to accept the same signal using sigwaitinfo(2), the > kernel will arbitrarily select one of these threads to > receive the signal. I won't do a deep review of the thread section now but you might want to mention that fatal signals always take down the whole thread-group, i.e. SIGKILL, SIGSEGV, etc... > > CLONE_UNTRACED (since Linux 2.5.46) > If CLONE_UNTRACED is specified, then a tracing process can‐ > not force CLONE_PTRACE on this child process. > > CLONE_VFORK (since Linux 2.2) > If CLONE_VFORK is set, the execution of the calling process > is suspended until the child releases its virtual memory > resources via a call to execve(2) or _exit(2) (as with > vfork(2)). > > If CLONE_VFORK is not set, then both the calling process > and the child are schedulable after the call, and an appli‐ > cation should not rely on execution occurring in any par‐ > ticular order. > > CLONE_VM (since Linux 2.0) > If CLONE_VM is set, the calling process and the child > process run in the same memory space. In particular, mem‐ > ory writes performed by the calling process or by the child > process are also visible in the other process. Moreover, > any memory mapping or unmapping performed with mmap(2) or > munmap(2) by the child or calling process also affects the > other process. > > If CLONE_VM is not set, the child process runs in a sepa‐ > rate copy of the memory space of the calling process at the > time of clone(). Memory writes or file mappings/unmappings > performed by one of the processes do not affect the other, > as with fork(2). > > NOTES > One use of these systems calls is to implement threads: multiple > flows of control in a program that run concurrently in a shared > address space. > > Glibc does not provide a wrapper for clone(3); call it using s/clone(3)/clone(2)/? > syscall(2). > > Note that the glibc clone() wrapper function makes some changes in > the memory pointed to by stack (changes required to set the stack > up correctly for the child) before invoking the clone() system In essence, you can't really use the clone{3}() syscall with a stack argument directly without having to do some assembly. User needing to mess with stacks are well-advised to use the glibc wrapper or need to really know what they are doing for _each_ arch they are using the syscall on. > call. So, in cases where clone() is used to recursively create > children, do not use the buffer employed for the parent's stack as > the stack of the child. > > C library/kernel differences > The raw clone() system call corresponds more closely to fork(2) in > that execution in the child continues from the point of the call. > As such, the fn and arg arguments of the clone() wrapper function > are omitted. > > Another difference for the raw clone() system call is that the > stack argument may be NULL, in which case the child uses a dupli‐ > cate of the parent's stack. (Copy-on-write semantics ensure that That reads misleading, I think. It seems to me what you want to say is that the raw syscall is perfectly happy to accept a NULL stack argument for both clone() and clone3() but that the glibc wrapper does not allow that. So this should probably read: In contrast to the glibc wrapper the raw clone() system call accepts NULL as stack argument. In this case the child uses a dupli‐ cate of the parent's stack. (Copy-on-write semantics ensure that or something similar. :) > the child gets separate copies of stack pages when either process > modifies the stack.) In this case, for correct operation, the > CLONE_VM option should not be specified. (If the child shares the > parent's memory because of the use of the CLONE_VM flag, then no > copy-on-write duplication occurs and chaos is likely to result.) +1 on this. This is very important to mention! > > The order of the arguments also differs in the raw system call, > and there are variations in the arguments across architectures, as > detailed in the following paragraphs. _sigh_ don't remind me... > > The raw system call interface on x86-64 and some other architec‐ > tures (including sh, tile, ia-64, and alpha) is: > > long clone(unsigned long flags, void *stack, > int *parent_tid, int *child_tid, > unsigned long tls); I wouldn't even mention clone() for ia64 anymore. It will _not_ work correctly at all. ia64 requires stack_size as it expects the stack to be passed pointing to the lowest address but the clone() version for ia64 does not have a stack_size argument... So the only way to get clone() to work on ia64 is by using the ia64 specific clone2(). > > On x86-32, and several other common architectures (including > score, ARM, ARM 64, PA-RISC, arc, Power PC, xtensa, and MIPS), the > order of the last two arguments is reversed: > > long clone(unsigned long flags, void *stack, > int *parent_tid, unsigned long tls, > int *child_tid); > > On the cris and s390 architectures, the order of the first two > arguments is reversed: > > long clone(void *stack, unsigned long flags, > int *parent_tid, int *child_tid, > unsigned long tls); > > On the microblaze architecture, an additional argument is sup‐ > plied: > > long clone(unsigned long flags, void *stack, > int stack_size, /* Size of stack */ > int *parent_tid, int *child_tid, > unsigned long tls); The additional argument is stack_size and contrary to what one would expect _ignored_. I.e. on microblaze one still needs to pass stack pointing to the top of the stack. > > blackfin, m68k, and sparc > The argument-passing conventions on blackfin, m68k, and sparc are > different from the descriptions above. For details, see the ker‐ > nel (and glibc) source. > > ia64 > On ia64, a different interface is used: > > int __clone2(int (*fn)(void *), > void *stack_base, size_t stack_size, > int flags, void *arg, ... > /* pid_t *parent_tid, struct user_desc *tls, > pid_t *child_tid */ ); > > The prototype shown above is for the glibc wrapper function; for > the system call itself, the prototype can be described as follows > (it is identical to the clone() prototype on microblaze): > > long clone2(unsigned long flags, void *stack_base, > int stack_size, /* Size of stack */ > int *parent_tid, int *child_tid, > unsigned long tls); > > __clone2() operates in the same way as clone(), except that > stack_base points to the lowest address of the child's stack area, > and stack_size specifies the size of the stack pointed to by > stack_base. > > Linux 2.4 and earlier > In Linux 2.4 and earlier, clone() does not take arguments par‐ > ent_tid, tls, and child_tid. > > RETURN VALUE > On success, the thread ID of the child process is returned in the > caller's thread of execution. On failure, -1 is returned in the > caller's context, no child process will be created, and errno will > be set appropriately. > > ERRORS > EAGAIN Too many processes are already running; see fork(2). > > EINVAL CLONE_SIGHAND was specified, but CLONE_VM was not. (Since > Linux 2.6.0.) > > EINVAL CLONE_THREAD was specified, but CLONE_SIGHAND was not. > (Since Linux 2.5.35.) > > EINVAL CLONE_THREAD was specified, but the current process previ‐ > ously called unshare(2) with the CLONE_NEWPID flag or used > setns(2) to reassociate itself with a PID namespace. > > EINVAL Both CLONE_FS and CLONE_NEWNS were specified in flags. > > EINVAL (since Linux 3.9) > Both CLONE_NEWUSER and CLONE_FS were specified in flags. > > EINVAL Both CLONE_NEWIPC and CLONE_SYSVSEM were specified in > flags. > > EINVAL One (or both) of CLONE_NEWPID or CLONE_NEWUSER and one (or > both) of CLONE_THREAD or CLONE_PARENT were specified in > flags. > > EINVAL Returned by the glibc clone() wrapper function when fn or > stack is specified as NULL. > > EINVAL CLONE_NEWIPC was specified in flags, but the kernel was not > configured with the CONFIG_SYSVIPC and CONFIG_IPC_NS > options. > > EINVAL CLONE_NEWNET was specified in flags, but the kernel was not > configured with the CONFIG_NET_NS option. > > EINVAL CLONE_NEWPID was specified in flags, but the kernel was not > configured with the CONFIG_PID_NS option. > > EINVAL CLONE_NEWUSER was specified in flags, but the kernel was > not configured with the CONFIG_USER_NS option. > > EINVAL CLONE_NEWUTS was specified in flags, but the kernel was not > configured with the CONFIG_UTS_NS option. > > EINVAL stack is not aligned to a suitable boundary for this archi‐ > tecture. For example, on aarch64, stack must be a multiple > of 16. If the stack was created with mmap(NULL, ...) as outlined above this should be taken care of, I think. > > EINVAL CLONE_PIDFD was specified together with CLONE_DETACHED. Should be: EINVAL (clone3() only) CLONE_DETACHED was specified (only with clone3()). EINVAL (clone() only) CLONE_PIDFD was specified together with CLONE_DETACHED > > EINVAL CLONE_PIDFD was specified together with CLONE_THREAD. > > EINVAL (clone() only) > CLONE_PIDFD was specified together with CLONE_PARENT_SET‐ > TID. > > ENOMEM Cannot allocate sufficient memory to allocate a task struc‐ > ture for the child, or to copy those parts of the caller's > context that need to be copied. > > ENOSPC (since Linux 3.7) > CLONE_NEWPID was specified in flags, but the limit on the > nesting depth of PID namespaces would have been exceeded; > see pid_namespaces(7). > > ENOSPC (since Linux 4.9; beforehand EUSERS) > CLONE_NEWUSER was specified in flags, and the call would > cause the limit on the number of nested user namespaces to > be exceeded. See user_namespaces(7). > > From Linux 3.11 to Linux 4.8, the error diagnosed in this > case was EUSERS. > > ENOSPC (since Linux 4.9) > One of the values in flags specified the creation of a new > user namespace, but doing so would have caused the limit > defined by the corresponding file in /proc/sys/user to be > exceeded. For further details, see namespaces(7). > > EPERM CLONE_NEWCGROUP, CLONE_NEWIPC, CLONE_NEWNET, CLONE_NEWNS, > CLONE_NEWPID, or CLONE_NEWUTS was specified by an unprivi‐ > leged process (process without CAP_SYS_ADMIN). > > EPERM CLONE_PID was specified by a process other than process 0. > (This error occurs only on Linux 2.5.15 and earlier.) > > EPERM CLONE_NEWUSER was specified in flags, but either the effec‐ > tive user ID or the effective group ID of the caller does > not have a mapping in the parent namespace (see user_names‐ > paces(7)). > > EPERM (since Linux 3.9) > CLONE_NEWUSER was specified in flags and the caller is in a > chroot environment (i.e., the caller's root directory does > not match the root directory of the mount namespace in > which it resides). > > ERESTARTNOINTR (since Linux 2.6.17) > System call was interrupted by a signal and will be > restarted. (This can be seen only during a trace.) > > EUSERS (Linux 3.11 to Linux 4.8) > CLONE_NEWUSER was specified in flags, and the limit on the > number of nested user namespaces would be exceeded. See > the discussion of the ENOSPC error above. > > VERSIONS > The clone3() system call first appeared in Linux 5.3. > > CONFORMING TO > These system calls are Linux-specific and should not be used in > programs intended to be portable. > > NOTES > The kcmp(2) system call can be used to test whether two processes > share various resources such as a file descriptor table, System V > semaphore undo operations, or a virtual address space. > > Handlers registered using pthread_atfork(3) are not executed dur‐ > ing a call to clone(). > > In the Linux 2.4.x series, CLONE_THREAD generally does not make > the parent of the new thread the same as the parent of the calling > process. However, for kernel versions 2.4.7 to 2.4.18 the > CLONE_THREAD flag implied the CLONE_PARENT flag (as in Linux 2.6.0 > and later). > > For a while there was CLONE_DETACHED (introduced in 2.5.32): par‐ > ent wants no child-exit signal. In Linux 2.6.2, the need to give > this flag together with CLONE_THREAD disappeared. This flag is > still defined, but has no effect. This is clone() specific and not true when passed together with CLONE_PIDFD. clone3() will EINVAL all instances where CLONE_DETACHED is passed. > > On i386, clone() should not be called through vsyscall, but > directly through int $0x80. > > BUGS > GNU C library versions 2.3.4 up to and including 2.24 contained a > wrapper function for getpid(2) that performed caching of PIDs. > This caching relied on support in the glibc wrapper for clone(), > but limitations in the implementation meant that the cache was not > up to date in some circumstances. In particular, if a signal was > delivered to the child immediately after the clone() call, then a > call to getpid(2) in a handler for the signal could return the PID > of the calling process ("the parent"), if the clone wrapper had > not yet had a chance to update the PID cache in the child. (This > discussion ignores the case where the child was created using > CLONE_THREAD, when getpid(2) should return the same value in the > child and in the process that called clone(), since the caller and > the child are in the same thread group. The stale-cache problem > also does not occur if the flags argument includes CLONE_VM.) To > get the truth, it was sometimes necessary to use code such as the > following: > > #include <syscall.h> > > pid_t mypid; > > mypid = syscall(SYS_getpid); > > Because of the stale-cache problem, as well as other problems > noted in getpid(2), the PID caching feature was removed in glibc > 2.25. > > EXAMPLE > The following program demonstrates the use of clone() to create a > child process that executes in a separate UTS namespace. The > child changes the hostname in its UTS namespace. Both parent and > child then display the system hostname, making it possible to see > that the hostname differs in the UTS namespaces of the parent and > child. For an example of the use of this program, see setns(2). > > Program source > #define _GNU_SOURCE > #include <sys/wait.h> > #include <sys/utsname.h> > #include <sched.h> > #include <string.h> > #include <stdio.h> > #include <stdlib.h> > #include <unistd.h> > > #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \ > } while (0) > > static int /* Start function for cloned child */ > childFunc(void *arg) > { > struct utsname uts; > > /* Change hostname in UTS namespace of child */ > > if (sethostname(arg, strlen(arg)) == -1) > errExit("sethostname"); > > /* Retrieve and display hostname */ > > if (uname(&uts) == -1) > errExit("uname"); > printf("uts.nodename in child: %s\n", uts.nodename); > > /* Keep the namespace open for a while, by sleeping. > This allows some experimentation--for example, another > process might join the namespace. */ > > sleep(200); > > return 0; /* Child terminates now */ > } > > #define STACK_SIZE (1024 * 1024) /* Stack size for cloned child */ > > int > main(int argc, char *argv[]) > { > char *stack; /* Start of stack buffer */ > char *stackTop; /* End of stack buffer */ > pid_t pid; > struct utsname uts; > > if (argc < 2) { > fprintf(stderr, "Usage: %s <child-hostname>\n", argv[0]); > exit(EXIT_SUCCESS); > } > > /* Allocate stack for child */ > > stack = malloc(STACK_SIZE); I'd really change this to mmap() since it makes some of the requirements more obvious including the MAP_STACK flag. Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-07 15:19 ` Christian Brauner @ 2019-11-07 16:10 ` Florian Weimer 2019-11-09 8:09 ` Michael Kerrisk (man-pages) 1 sibling, 0 replies; 30+ messages in thread From: Florian Weimer @ 2019-11-07 16:10 UTC (permalink / raw) To: Christian Brauner Cc: Michael Kerrisk (man-pages), Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn * Christian Brauner: > I've always been confused by the "..." for the glibc wrapper. The glibc > prototype in bits/sched.h also looks like this: > > extern int clone (int (*__fn) (void *__arg), void *__child_stack, int __flags, void *__arg, ...) __THROW; > > The additionl args parent_tid, tls, and child_tid are present in _all_ > clone version in the same order. In fact the glibc wrapper here give the > illusion that it's parent_tid, tls, child_tid. The underlying syscall > has a different order parent_tidptr, child_tidptr, tls. > > Florian, can you advise what prototype we should mention for the glibc > clone() wrapper here. I'd like it to be as simple as possible and get > rid of the ... > Architectural differences are explained in detail below anyway. Our header has: /* Clone current process. */ extern int clone (int (*__fn) (void *__arg), void *__child_stack, int __flags, void *__arg, ...) __THROW; I have not checked all assembler implementations. In theory there could be one that relies on the different calling convention for variadic functions (e.g., the existence of a parameter save area on POWER). Or that swaps arguments in some architecure-specific way. 8-( I don't have much guidance on this matter, sorry. I expect that for clone3, we'll provide a same-stack variant as well (for fork/vfork-like usage), which will be much closer to the kernel interface. clone/clone2 doesn't seem very fixable to me at this point. Thanks, Florian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-07 15:19 ` Christian Brauner 2019-11-07 16:10 ` Florian Weimer @ 2019-11-09 8:09 ` Michael Kerrisk (man-pages) 2019-11-09 16:53 ` Christian Brauner 2019-11-11 14:55 ` Jann Horn 1 sibling, 2 replies; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-11-09 8:09 UTC (permalink / raw) To: Christian Brauner, Florian Weimer Cc: mtk.manpages, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn, Ingo Molnar [CC += Ingo, in case he has something to add re MAP_STACK; perhaps Florian also might have some thoughts] Hello Christian, Thanks not only for reviewing the clone3() stuff, but also in effect the entire page! You turned up some useful points from the historical text. On 11/7/19 4:19 PM, Christian Brauner wrote: > On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: >> Hello Christian and all, >> >> I've made a first shot at adding documentation for clone3(). You can >> see the diff here: >> https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=faa0e55ae9e490d71c826546bbdef954a1800969 >> >> In the end, I decided that the most straightforward approach was to >> add the documentation as part of the existing clone(2) page. This has >> the advantage of avoiding duplication of information across two pages, >> and perhaps also makes it easier to see the commonality of the two >> APIs. >> >> Because the new text is integrated into the existing page, I think it >> makes most sense to just show that page text for review purposes. I >> welcome input on the below. >> >> The notable changes are: >> * In the first part of the page, up to and including the paragraph >> with the subheading "The flags bit mask" >> * Minor changes in the description of CLONE_CHILD_CLEARTID, >> CLONE_CHILD_SETTID, CLONE_PARENT_SETTID, and CLONE_PIDFD, to reflect >> the argument differences between clone() and clone2() > > (Fyi, I think you meant to write clone3()here. clone2() is specific to ia64.) (Yes.) >> Most of the resy of page is unchanged. >> >> I welcome fixes, suggestions for improvements, etc. >> >> Thanks, >> >> Michael >> >> CLONE(2) Linux Programmer's Manual CLONE(2) >> >> NAME >> clone, __clone2 - create a child process > > Should this include clone3()? > >> >> SYNOPSIS >> /* Prototype for the glibc wrapper function */ >> >> #define _GNU_SOURCE >> #include <sched.h> >> >> int clone(int (*fn)(void *), void *stack, int flags, void *arg, ... >> /* pid_t *parent_tid, void *tls, pid_t *child_tid */ ); > > I've always been confused by the "..." for the glibc wrapper. The glibc > prototype in bits/sched.h also looks like this: I'm not sure that I understand your confusion. The point is, it's a variadic function: the extra arguments are only ever touched if the relevant flags are specified. Or maybe you just meant: "this should not be a variadic function, but rather that all 7 arguments should always be specified"? But, then I think the point is that clone() (and the underlying syscall) did not always have this number of arguments. Before Linux 2.6, the wrapper and syscall only had 4 arguments. > extern int clone (int (*__fn) (void *__arg), void *__child_stack, int __flags, void *__arg, ...) __THROW; > > The additionl args parent_tid, tls, and child_tid are present in _all_ > clone version in the same order. In fact the glibc wrapper here give the > illusion that it's parent_tid, tls, child_tid. The underlying syscall > has a different order parent_tidptr, child_tidptr, tls. > > Florian, can you advise what prototype we should mention for the glibc > clone() wrapper here. I'd like it to be as simple as possible and get > rid of the ... > Architectural differences are explained in detail below anyway. > >> >> /* For the prototype of the raw clone() system call, see NOTES */ >> >> long clone3(struct clone_args *cl_args, size_t size); >> >> Note: There is not yet a glibc wrapper for clone3(); see NOTES. >> >> DESCRIPTION >> These system calls create a new process, in a manner similar to >> fork(2). >> >> Unlike fork(2), these system calls allow the child process to >> share parts of its execution context with the calling process, > > Hm, sharing part of the execution context is not the only thing that > clone{3}() does. True. That text has been in the page for 21 years. It probably needs a new coat of paint... > Maybe something like: > > Unlike fork(2), these system calls allow to create a child process with > different properties than its parent. For example, these syscalls allow > the child to share various parts of the execution context with the > calling process such as [...]. They also allow placing the process in a > new set of namespaces. > > Just a thought. A good thought... I changed the text to read: Unlike fork(2), these system calls allow the child to be created with various properties that differ from the parent. For example, these system calls provide more precise control over what pieces of execution context are shared between the calling process and the child process. For example, using these system calls, the caller can control whether or not the two processes share the vir‐ tual address space, the table of file descriptors, and the table of signal handlers. These system system calls also allow the new child process to placed in separate namespaces(7). Okay? >> such as the virtual address space, the table of file descriptors, >> and the table of signal handlers. (Note that on this manual page, >> "calling process" normally corresponds to "parent process". But >> see the description of CLONE_PARENT below.) >> >> This page describes the following interfaces: >> >> * The glibc clone() wrapper function and the underlying system >> call on which it is based. The main text describes the wrapper >> function; the differences for the raw system call are described >> toward the end of this page. >> >> * The newer clone3() system call. >> >> The clone() wrapper function >> When the child process is created with the clone() wrapper func‐ >> tion, it commences execution by calling the function pointed to by >> the argument fn. (This differs from fork(2), where execution con‐ >> tinues in the child from the point of the fork(2) call.) The arg >> argument is passed as the argument of the function fn. >> >> When the fn(arg) function returns, the child process terminates. >> The integer returned by fn is the exit status for the child >> process. The child process may also terminate explicitly by call‐ >> ing exit(2) or after receiving a fatal signal. >> >> The stack argument specifies the location of the stack used by the >> child process. Since the child and calling process may share mem‐ >> ory, it is not possible for the child process to execute in the >> same stack as the calling process. The calling process must >> therefore set up memory space for the child stack and pass a >> pointer to this space to clone(). Stacks grow downward on all > > It might be a good idea to advise people to use mmap() to create a > stack. The "canonical" way of doing this would usually be something like > > #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ > void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); > > (Yes, the MAP_STACK is usally a noop but people should always include it > in case some arch will have weird alignment requirement in which case > this flag can be changed to actually do something...) So, I'm getting a little bit of an education here, and maybe you are going to further educate me. Long ago, I added the documentation of MAP_STACK to mmap(2), but I never quite connected the dots. However, you say MAP_STACK is *usually* a noop. As far as I can see, in current kernels it is *always* a noop. And AFAICS, since it was first added in 2.6.27 (2008), it has always been a noop. I wonder if it will always be a noop. If we go back and look at the commit: [[ commit 2fdc86901d2ab30a12402b46238951d2a7891590 Author: Ingo Molnar <mingo@elte.hu> Date: Wed Aug 13 18:02:18 2008 +0200 x86: add MAP_STACK mmap flag as per this discussion: http://lkml.org/lkml/2008/8/12/423 Pardo reported that 64-bit threaded apps, if their stacks exceed the combined size of ~4GB, slow down drastically in pthread_create() - because glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is a legacy hack - to speed up context switching on certain early model 64-bit P4 CPUs. So introduce a new flag to be used by glibc instead, to not constrain 64-bit apps like this. glibc can switch to this new flag straight away - it will be ignored by the kernel. If those old CPUs ever matter to anyone, support for it can be implemented. ]] And see also https://lwn.net/Articles/294642/ So, my understanding from the above is that MAP_STACK was added to allow a possible fix on some old architectures, should anyone decide it was worth doing the work of implementing it. But so far, after 12 years, no one did. It kind of looks like no one ever will (since those old architectures become less and less relevant). So, AFAICT, while it's not wrong to tell people to use mmap(MAP_STACKED), it doesn't provide any benefit (and perhaps never will), and it is a more clumsy than plain old malloc(). But, it could well be that there's something I still don't know here, and I'd be interested to get further education. >> processors that run Linux (except the HP PA processors), so stack >> usually points to the topmost address of the memory space set up >> for the child stack. Note that clone() does not provide a means >> whereby the caller can inform the kernel of the size of the stack >> area. >> >> The remaining arguments to clone() are discussed below. >> >> clone3() >> The clone3() system call provides a superset of the functionality >> of the older clone() interface. It also provides a number of API > > Technically, clone3() currently provides the same functionality as > clone() it just has (hopefully) saner semantics, i.e. where as clone() > _silently_ ignores unknown options clone3() will reject them with > EINVAL (e.g. CSIGNAL and CLONE_DETACHED). > But it's good enough and will be true with v5.5 Exactly. My text was future-proofing ;-). >> improvements, including: space for additional flags bits; cleaner >> separation in the use of various arguments; and the ability to >> specify the size of the child's stack area. >> >> As with fork(2), clone3() returns in both the parent and the >> child. It returns 0 in the child process and returns the PID of >> the child in the parent. >> >> The cl_args argument of clone3() is a structure of the following >> form: >> >> struct clone_args { >> u64 flags; /* Flags bit mask */ >> u64 pidfd; /* Where to store PID file descriptor >> (int *) */ >> u64 child_tid; /* Where to store child TID, >> in child's memory (int *) */ >> u64 parent_tid; /* Where to store child TID, >> in parent's memory (int *) */ >> u64 exit_signal; /* Signal to deliver to parent on >> child termination */ >> u64 stack; /* Pointer to lowest byte of stack */ >> u64 stack_size; /* Size of stack */ >> u64 tls; /* Location of new TLS */ >> }; >> >> The size argument that is supplied to clone3() should be initial‐ >> ized to the size of this structure. (The existence of the size >> argument permits future extensions to the clone_args structure.) >> >> The stack for the child process is specified via cl_args.stack, >> which points to the lowest byte of the stack area, and >> cl_args.stack_size, which specifies the size of the stack in >> bytes. In the case where the CLONE_VM flag (see below) is speci‐ > > This is now actually true. :) Yeah, but I didn't get mentioned in the commit ;-) >> fied, a stack must be explicitly allocated and specified. Other‐ >> wise, these two fields can be specified as NULL and 0, which >> causes the child to use the same stack area as the parent (in the >> child's own virtual address space). >> >> The remaining fields in the cl_args argument are discussed below. >> >> Equivalence between clone() and clone3() arguments >> Unlike the older clone() interface, where arguments are passed >> individually, in the newer clone3() interface the arguments are >> packaged into the clone_args structure shown above. This struc‐ >> ture allows for a superset of the information passed via the >> clone() arguments. >> >> The following table shows the equivalence between the arguments of >> clone() and the fields in the clone_args argument supplied to >> clone3(): >> >> clone() clone(3) Notes >> cl_args field >> flags & ~0xff flags > > CLONE_DETACHED doesn't work. So, in the Notes column I added "For most flags; details below". >> parent_tid pidfd See CLONE_PIDFD >> child_tid child_tid See CLONE_CHILD_SETTID >> parent_tid parent_tid See CLONE_PARENT_SETTID >> flags & 0xff exit_signal >> stack stack >> >> --- stack_size > > posterity: Apart from microblaze and ia64's clone2() which both have a > stack_size argument. :) Yes, but those are details I only want to get into later in the page. >> tls tls See CLONE_SETTLS >> >> The child termination signal >> When the child process terminates, a signal may be sent to the >> parent. The termination signal is specified in the low byte of >> flags (clone()) or in cl_args.exit_signal (clone3()). If this >> signal is specified as anything other than SIGCHLD, then the par‐ >> ent process must specify the __WALL or __WCLONE options when wait‐ >> ing for the child with wait(2). If no signal (i.e., zero) is >> specified, then the parent process is not signaled when the child >> terminates. >> >> The flags bit mask >> Both clone() and clone3() allow a flags bit mask that modifies >> their behavior and allows the caller to specify what is shared >> between the calling process and the child process. This bit mask >> is specified as a bitwise-OR of zero or more of the constants >> listed below. Except as otherwise noted below, these flags are >> available (and have the same effect) in both clone() and clone3(). >> >> CLONE_CHILD_CLEARTID (since Linux 2.5.49) >> Clear (zero) the child thread ID at the location pointed to >> by child_tid (clone()) or cl_args.child_tid (clone3()) in >> child memory when the child exits, and do a wakeup on the >> futex at that address. The address involved may be changed >> by the set_tid_address(2) system call. This is used by >> threading libraries. >> >> CLONE_CHILD_SETTID (since Linux 2.5.49) >> Store the child thread ID at the location pointed to by >> child_tid (clone()) or cl_args.child_tid (clone3()) in the >> child's memory. The store operation completes before >> clone() returns control to user space in the child process. >> (Note that the store operation may not have completed >> before clone() returns in the parent process, which will be >> relevant if the CLONE_VM flag is also employed.) >> >> CLONE_FILES (since Linux 2.0) >> If CLONE_FILES is set, the calling process and the child >> process share the same file descriptor table. Any file >> descriptor created by the calling process or by the child >> process is also valid in the other process. Similarly, if >> one of the processes closes a file descriptor, or changes >> its associated flags (using the fcntl(2) F_SETFD opera‐ >> tion), the other process is also affected. If a process >> sharing a file descriptor table calls execve(2), its file >> descriptor table is duplicated (unshared). >> >> If CLONE_FILES is not set, the child process inherits a >> copy of all file descriptors opened in the calling process >> at the time of clone(). Subsequent operations that open or >> close file descriptors, or change file descriptor flags, >> performed by either the calling process or the child >> process do not affect the other process. Note, however, >> that the duplicated file descriptors in the child refer to >> the same open file descriptions as the corresponding file >> descriptors in the calling process, and thus share file >> offsets and file status flags (see open(2)). >> >> CLONE_FS (since Linux 2.0) >> If CLONE_FS is set, the caller and the child process share >> the same filesystem information. This includes the root of >> the filesystem, the current working directory, and the >> umask. Any call to chroot(2), chdir(2), or umask(2) per‐ >> formed by the calling process or the child process also >> affects the other process. >> >> If CLONE_FS is not set, the child process works on a copy >> of the filesystem information of the calling process at the >> time of the clone() call. Calls to chroot(2), chdir(2), or >> umask(2) performed later by one of the processes do not >> affect the other process. >> >> CLONE_IO (since Linux 2.6.25) >> If CLONE_IO is set, then the new process shares an I/O con‐ >> text with the calling process. If this flag is not set, >> then (as with fork(2)) the new process has its own I/O con‐ >> text. >> >> The I/O context is the I/O scope of the disk scheduler >> (i.e., what the I/O scheduler uses to model scheduling of a >> process's I/O). If processes share the same I/O context, >> they are treated as one by the I/O scheduler. As a conse‐ >> quence, they get to share disk time. For some I/O sched‐ >> ulers, if two processes share an I/O context, they will be >> allowed to interleave their disk access. If several >> threads are doing I/O on behalf of the same process >> (aio_read(3), for instance), they should employ CLONE_IO to >> get better I/O performance. >> >> If the kernel is not configured with the CONFIG_BLOCK >> option, this flag is a no-op. >> >> CLONE_NEWCGROUP (since Linux 4.6) >> Create the process in a new cgroup namespace. If this flag >> is not set, then (as with fork(2)) the process is created >> in the same cgroup namespaces as the calling process. This >> flag is intended for the implementation of containers. >> >> For further information on cgroup namespaces, see >> cgroup_namespaces(7). >> >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWCGROUP. >> >> CLONE_NEWIPC (since Linux 2.6.19) >> If CLONE_NEWIPC is set, then create the process in a new >> IPC namespace. If this flag is not set, then (as with >> fork(2)), the process is created in the same IPC namespace >> as the calling process. This flag is intended for the >> implementation of containers. >> >> An IPC namespace provides an isolated view of System V IPC >> objects (see sysvipc(7)) and (since Linux 2.6.30) POSIX >> message queues (see mq_overview(7)). The common character‐ >> istic of these IPC mechanisms is that IPC objects are iden‐ >> tified by mechanisms other than filesystem pathnames. >> >> Objects created in an IPC namespace are visible to all >> other processes that are members of that namespace, but are >> not visible to processes in other IPC namespaces. >> >> When an IPC namespace is destroyed (i.e., when the last >> process that is a member of the namespace terminates), all >> IPC objects in the namespace are automatically destroyed. >> >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWIPC. This flag can't be specified in conjunction >> with CLONE_SYSVSEM. >> >> For further information on IPC namespaces, see names‐ >> paces(7). >> >> CLONE_NEWNET (since Linux 2.6.24) >> (The implementation of this flag was completed only by >> about kernel version 2.6.29.) >> >> If CLONE_NEWNET is set, then create the process in a new >> network namespace. If this flag is not set, then (as with >> fork(2)) the process is created in the same network names‐ >> pace as the calling process. This flag is intended for the >> implementation of containers. >> >> A network namespace provides an isolated view of the net‐ >> working stack (network device interfaces, IPv4 and IPv6 >> protocol stacks, IP routing tables, firewall rules, the >> /proc/net and /sys/class/net directory trees, sockets, >> etc.). A physical network device can live in exactly one >> network namespace. A virtual network (veth(4)) device pair >> provides a pipe-like abstraction that can be used to create >> tunnels between network namespaces, and can be used to cre‐ >> ate a bridge to a physical network device in another names‐ >> pace. >> >> When a network namespace is freed (i.e., when the last >> process in the namespace terminates), its physical network >> devices are moved back to the initial network namespace >> (not to the parent of the process). For further informa‐ >> tion on network namespaces, see namespaces(7). > > That's a lot of network namespace specific information, no? Maybe just > point to man network_namespaces? It's true. See below. >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWNET. >> >> CLONE_NEWNS (since Linux 2.4.19) >> If CLONE_NEWNS is set, the cloned child is started in a new >> mount namespace, initialized with a copy of the namespace >> of the parent. If CLONE_NEWNS is not set, the child lives >> in the same mount namespace as the parent. >> >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWNS. It is not permitted to specify both >> CLONE_NEWNS and CLONE_FS in the same clone() call. > > Wait, I just realized that CLONE_FS has __different__ semantics in > clone(2) than in unshare(2). That's crazy. > unshare(2)'s basically ~CLONE_FS for clone2()... > That deserves a big fat warning imho. At leats it's mentioned in the > unshare(2) manpage. Sigh.... https://lore.kernel.org/lkml/1101.1141274924@www008.gmx.net/ >> For further information on mount namespaces, see names‐ >> paces(7) and mount_namespaces(7). >> >> CLONE_NEWPID (since Linux 2.6.24) >> If CLONE_NEWPID is set, then create the process in a new >> PID namespace. If this flag is not set, then (as with >> fork(2)) the process is created in the same PID namespace >> as the calling process. This flag is intended for the >> implementation of containers. >> >> For further information on PID namespaces, see names‐ >> paces(7) and pid_namespaces(7). >> >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWPID. This flag can't be specified in conjunction >> with CLONE_THREAD or CLONE_PARENT. >> >> CLONE_NEWUSER >> (This flag first became meaningful for clone() in Linux >> 2.6.23, the current clone() semantics were merged in Linux >> 3.5, and the final pieces to make the user namespaces com‐ >> pletely usable were merged in Linux 3.8.) >> >> If CLONE_NEWUSER is set, then create the process in a new >> user namespace. If this flag is not set, then (as with >> fork(2)) the process is created in the same user namespace >> as the calling process. >> >> Before Linux 3.8, use of CLONE_NEWUSER required that the >> caller have three capabilities: CAP_SYS_ADMIN, CAP_SETUID, >> and CAP_SETGID. Starting with Linux 3.8, no privileges are >> needed to create a user namespace. >> >> This flag can't be specified in conjunction with >> CLONE_THREAD or CLONE_PARENT. For security reasons, >> CLONE_NEWUSER cannot be specified in conjunction with >> CLONE_FS. >> >> For further information on user namespaces, see names‐ >> paces(7) and user_namespaces(7). >> >> CLONE_NEWUTS (since Linux 2.6.19) >> If CLONE_NEWUTS is set, then create the process in a new >> UTS namespace, whose identifiers are initialized by dupli‐ >> cating the identifiers from the UTS namespace of the call‐ >> ing process. If this flag is not set, then (as with >> fork(2)) the process is created in the same UTS namespace >> as the calling process. This flag is intended for the >> implementation of containers. >> >> A UTS namespace is the set of identifiers returned by >> uname(2); among these, the domain name and the hostname can >> be modified by setdomainname(2) and sethostname(2), respec‐ >> tively. Changes made to the identifiers in a UTS namespace >> are visible to all other processes in the same namespace, >> but are not visible to processes in other UTS namespaces. > > Might again be a little too detailed but that's just my opinion. :) I agree. The thing is that the clone(2) text was written long before the section 7 namespaces manual pages, and some duplication occurred. I've removed this text, and done the same for the corresponding text in CLONE_NEWNET and CLONE_NEWIPC. >> Only a privileged process (CAP_SYS_ADMIN) can employ >> CLONE_NEWUTS. >> >> For further information on UTS namespaces, see names‐ >> paces(7). >> >> CLONE_PARENT (since Linux 2.3.12) >> If CLONE_PARENT is set, then the parent of the new child >> (as returned by getppid(2)) will be the same as that of the >> calling process. >> >> If CLONE_PARENT is not set, then (as with fork(2)) the >> child's parent is the calling process. >> >> Note that it is the parent process, as returned by getp‐ >> pid(2), which is signaled when the child terminates, so >> that if CLONE_PARENT is set, then the parent of the calling >> process, rather than the calling process itself, will be >> signaled. >> >> CLONE_PARENT_SETTID (since Linux 2.5.49) >> Store the child thread ID at the location pointed to by >> parent_tid (clone()) or cl_args.child_tid (clone3()) in the >> parent's memory. (In Linux 2.5.32-2.5.48 there was a flag >> CLONE_SETTID that did this.) The store operation completes >> before clone() returns control to user space. >> >> CLONE_PID (Linux 2.0 to 2.5.15) >> If CLONE_PID is set, the child process is created with the >> same process ID as the calling process. This is good for >> hacking the system, but otherwise of not much use. From >> Linux 2.3.21 onward, this flag could be specified only by >> the system boot process (PID 0). The flag disappeared com‐ >> pletely from the kernel sources in Linux 2.5.16. Since >> then, the kernel silently ignores this bit if it is speci‐ >> fied in flags. > > He, not true anymore. :) > If Thomas' history tree is not lying to me than CLONE_PID used to be: > #define CLONE_PID 0x00001000 /* set if pid shared */ > which then got replaced with > #define CLONE_IDLETASK 0x00001000 /* set if new pid should be 0 > in 27568369be8c ("[PATCH] Hotplug CPU prep") > CLONE_IDLETASK itself got removed in f4205a53c8f5 ("[PATCH] sched: consolidate CLONE_IDLETASK masking") Yes, but CLONE_IDLETASK was never accessible from userspace, as far as I know. (That is, if you specified that bit in flags, it was ignored. Rusty's commit message obliquely states this.) > And then CLONE_PIDFD took that bit. :) Congratulations :-). I changed the text here to read: CLONE_PID (Linux 2.0 to 2.5.15) If CLONE_PID is set, the child process is created with the same process ID as the calling process. This is good for hacking the system, but otherwise of not much use. From Linux 2.3.21 onward, this flag could be specified only by the system boot process (PID 0). The flag disappeared com‐ pletely from the kernel sources in Linux 2.5.16. Subse‐ quently, the kernel silently ignored this bit if it was specified in the flags mask. Much later, the same bit was recycled for use as the CLONE_PIDFD flag. >> CLONE_PIDFD (since Linux 5.2) >> If this flag is specified, a PID file descriptor referring >> to the child process is allocated and placed at a specified >> location in the parent's memory. The close-on-exec flag is >> set on this new file descriptor. PID file descriptors can >> be used for the purposes described in pidfd_open(2). >> >> * When using clone3(), the PID file descriptor is placed >> at the location pointed to by cl_args.pidfd. >> >> * When using clone(), the PID file descriptor is placed at >> the location pointed to by parent_tid. Since the par‐ >> ent_tid argument is used to return the PID file descrip‐ >> tor, CLONE_PIDFD cannot be used with CLONE_PARENT_SETTID >> when calling clone(). >> >> It is currently not possible to use this flag together with >> CLONE_THREAD. This means that the process identified by >> the PID file descriptor will always be a thread-group >> leader. >> >> For a while there was a CLONE_DETACHED flag. This flag is >> usually ignored when passed along with other flags. How‐ >> ever, when passed alongside CLONE_PIDFD, an error is >> returned. This ensures that this flag can be reused for >> further PID file descriptor features in the future. > > This section only applies to legacy clone(), i.e. legacy clone EINVALs > you with CLONE_DETACHED | CLONE_PIDFD whereas clone3() EINVALS you for > CLONE_DETACHED by itself. Okay -- but *you* added this text to the man page ;-). So, here's what I have done. 15 years after its demise, CLONE_DETACHED gets equal status with other flags in the manual page: CLONE_DETACHED (historical) For a while (during the Linux 2.5 development series) there was a CLONE_DETACHED flag, which caused the parent not to receive a signal when the child terminated. Ultimately, the effect of this flag was subsumed under the CLONE_THREAD flag and by the time Linux 2.6.0 was released, this flag had no effect. Starting in Linux 2.6.2, the need to give this flag together with CLONE_THREAD disappeared. This flag is still defined, but it is usually ignored when calling clone(). However, see the description of CLONE_PIDFD for some exceptions. And then under CLONE_PIDFD, I have: If the obsolete CLONE_DETACHED flag is specified alongside CLONE_PIDFD when calling clone(), an error is returned. An error also results if CLONE_DETACHED is specified when calling clone3(). This error behavior ensures that the bit corresponding to CLONE_DETACHED can be reused for further PID file descriptor features in the future. Okay? >> CLONE_PTRACE (since Linux 2.2) >> If CLONE_PTRACE is specified, and the calling process is >> being traced, then trace the child also (see ptrace(2)). >> >> CLONE_SETTLS (since Linux 2.5.32) >> The TLS (Thread Local Storage) descriptor is set to tls. >> >> The interpretation of tls and the resulting effect is >> architecture dependent. On x86, tls is interpreted as a >> struct user_desc * (see set_thread_area(2)). On x86-64 it >> is the new value to be set for the %fs base register (see >> the ARCH_SET_FS argument to arch_prctl(2)). On architec‐ >> tures with a dedicated TLS register, it is the new value of >> that register. > > Probably a gentle warning that this is a very advanced option and > usually should not be used by callers other than libraries implementing > threading or with specific use cases directly. I added: Use of this flag requires detailed knowledge and generally it should not be used except in libraries implementing threading. >> >> CLONE_SIGHAND (since Linux 2.0) >> If CLONE_SIGHAND is set, the calling process and the child >> process share the same table of signal handlers. If the >> calling process or child process calls sigaction(2) to >> change the behavior associated with a signal, the behavior >> is changed in the other process as well. However, the >> calling process and child processes still have distinct >> signal masks and sets of pending signals. So, one of them >> may block or unblock signals using sigprocmask(2) without >> affecting the other process. >> >> If CLONE_SIGHAND is not set, the child process inherits a >> copy of the signal handlers of the calling process at the >> time clone() is called. Calls to sigaction(2) performed >> later by one of the processes have no effect on the other >> process. >> >> Since Linux 2.6.0, flags must also include CLONE_VM if >> CLONE_SIGHAND is specified >> >> CLONE_STOPPED (since Linux 2.6.0) >> If CLONE_STOPPED is set, then the child is initially >> stopped (as though it was sent a SIGSTOP signal), and must >> be resumed by sending it a SIGCONT signal. >> >> This flag was deprecated from Linux 2.6.25 onward, and was >> removed altogether in Linux 2.6.38. Since then, the kernel >> silently ignores it without error. Starting with Linux >> 4.6, the same bit was reused for the CLONE_NEWCGROUP flag. >> >> CLONE_SYSVSEM (since Linux 2.5.10) >> If CLONE_SYSVSEM is set, then the child and the calling >> process share a single list of System V semaphore adjust‐ >> ment (semadj) values (see semop(2)). In this case, the >> shared list accumulates semadj values across all processes >> sharing the list, and semaphore adjustments are performed >> only when the last process that is sharing the list termi‐ >> nates (or ceases sharing the list using unshare(2)). If >> this flag is not set, then the child has a separate semadj >> list that is initially empty. >> >> CLONE_THREAD (since Linux 2.4.0) >> If CLONE_THREAD is set, the child is placed in the same >> thread group as the calling process. To make the remainder >> of the discussion of CLONE_THREAD more readable, the term >> "thread" is used to refer to the processes within a thread >> group. >> >> Thread groups were a feature added in Linux 2.4 to support >> the POSIX threads notion of a set of threads that share a >> single PID. Internally, this shared PID is the so-called >> thread group identifier (TGID) for the thread group. Since >> Linux 2.4, calls to getpid(2) return the TGID of the call‐ >> er. >> >> The threads within a group can be distinguished by their >> (system-wide) unique thread IDs (TID). A new thread's TID >> is available as the function result returned to the caller >> of clone(), and a thread can obtain its own TID using get‐ >> tid(2). >> >> When a call is made to clone() without specifying >> CLONE_THREAD, then the resulting thread is placed in a new >> thread group whose TGID is the same as the thread's TID. >> This thread is the leader of the new thread group. >> >> A new thread created with CLONE_THREAD has the same parent >> process as the caller of clone() (i.e., like CLONE_PARENT), > > Nit: s/i.e.,/i.e./? Actually not. "i.e." is considered equal to "for example" and the latter would be followed by a comma. >> so that calls to getppid(2) return the same value for all >> of the threads in a thread group. When a CLONE_THREAD >> thread terminates, the thread that created it using clone() >> is not sent a SIGCHLD (or other termination) signal; nor >> can the status of such a thread be obtained using wait(2). >> (The thread is said to be detached.) >> >> After all of the threads in a thread group terminate the >> parent process of the thread group is sent a SIGCHLD (or >> other termination) signal. >> >> If any of the threads in a thread group performs an >> execve(2), then all threads other than the thread group >> leader are terminated, and the new program is executed in > > s/is executed in/becomes the/? Hmmm, a program is not a task, so this doesn't feel quite right. Why don't you like the existing text? >> the thread group leader. >> >> If one of the threads in a thread group creates a child >> using fork(2), then any thread in the group can wait(2) for >> that child. >> >> Since Linux 2.5.35, flags must also include CLONE_SIGHAND >> if CLONE_THREAD is specified (and note that, since Linux >> 2.6.0, CLONE_SIGHAND also requires CLONE_VM to be >> included). >> >> Signal dispositions and actions are process-wide: if an >> unhandled signal is delivered to a thread, then it will >> affect (terminate, stop, continue, be ignored in) all mem‐ >> bers of the thread group. >> >> Each thread has its own signal mask, as set by sigproc‐ >> mask(2). >> >> A signal may be process-directed or thread-directed. A >> process-directed signal is targeted at a thread group >> (i.e., a TGID), and is delivered to an arbitrarily selected >> thread from among those that are not blocking the signal. >> A signal may be process-directed because it was generated >> by the kernel for reasons other than a hardware exception, >> or because it was sent using kill(2) or sigqueue(3). A >> thread-directed signal is targeted at (i.e., delivered to) >> a specific thread. A signal may be thread directed because >> it was sent using tgkill(2) or pthread_sigqueue(3), or >> because the thread executed a machine language instruction >> that triggered a hardware exception (e.g., invalid memory >> access triggering SIGSEGV or a floating-point exception >> triggering SIGFPE). >> >> A call to sigpending(2) returns a signal set that is the >> union of the pending process-directed signals and the sig‐ >> nals that are pending for the calling thread. >> >> If a process-directed signal is delivered to a thread >> group, and the thread group has installed a handler for the >> signal, then the handler will be invoked in exactly one, >> arbitrarily selected member of the thread group that has >> not blocked the signal. If multiple threads in a group are >> waiting to accept the same signal using sigwaitinfo(2), the >> kernel will arbitrarily select one of these threads to >> receive the signal. > > I won't do a deep review of the thread section now but you might want to > mention that fatal signals always take down the whole thread-group, i.e. > SIGKILL, SIGSEGV, etc... That point is covered above, in the paragraph that begins: "Signal dispositions and actions are process-wide...". Does that not suffice? >> >> CLONE_UNTRACED (since Linux 2.5.46) >> If CLONE_UNTRACED is specified, then a tracing process can‐ >> not force CLONE_PTRACE on this child process. >> >> CLONE_VFORK (since Linux 2.2) >> If CLONE_VFORK is set, the execution of the calling process >> is suspended until the child releases its virtual memory >> resources via a call to execve(2) or _exit(2) (as with >> vfork(2)). >> >> If CLONE_VFORK is not set, then both the calling process >> and the child are schedulable after the call, and an appli‐ >> cation should not rely on execution occurring in any par‐ >> ticular order. >> >> CLONE_VM (since Linux 2.0) >> If CLONE_VM is set, the calling process and the child >> process run in the same memory space. In particular, mem‐ >> ory writes performed by the calling process or by the child >> process are also visible in the other process. Moreover, >> any memory mapping or unmapping performed with mmap(2) or >> munmap(2) by the child or calling process also affects the >> other process. >> >> If CLONE_VM is not set, the child process runs in a sepa‐ >> rate copy of the memory space of the calling process at the >> time of clone(). Memory writes or file mappings/unmappings >> performed by one of the processes do not affect the other, >> as with fork(2). >> >> NOTES >> One use of these systems calls is to implement threads: multiple >> flows of control in a program that run concurrently in a shared >> address space. >> >> Glibc does not provide a wrapper for clone(3); call it using > > s/clone(3)/clone(2)/? Yep. Branden Robinson already reported this and I fixed it. >> syscall(2). >> >> Note that the glibc clone() wrapper function makes some changes in >> the memory pointed to by stack (changes required to set the stack >> up correctly for the child) before invoking the clone() system > > In essence, you can't really use the clone{3}() syscall with a stack > argument directly without having to do some assembly. (Yes.) > User needing to > mess with stacks are well-advised to use the glibc wrapper or need to > really know what they are doing for _each_ arch they are using the > syscall on. I understand the issues (I think), but it's not clear to me if you mean that some text in the manual page needs changing. >> call. So, in cases where clone() is used to recursively create >> children, do not use the buffer employed for the parent's stack as >> the stack of the child. >> >> C library/kernel differences >> The raw clone() system call corresponds more closely to fork(2) in >> that execution in the child continues from the point of the call. >> As such, the fn and arg arguments of the clone() wrapper function >> are omitted. >> >> Another difference for the raw clone() system call is that the >> stack argument may be NULL, in which case the child uses a dupli‐ >> cate of the parent's stack. (Copy-on-write semantics ensure that > > That reads misleading, I think. It seems to me what you want to say is > that the raw syscall is perfectly happy to accept a NULL stack argument > for both clone() and clone3() but that the glibc wrapper does not allow > that. So this should probably read: > > In contrast to the glibc wrapper the raw clone() system call > accepts NULL as stack argument. In this case the child uses a dupli‐ > cate of the parent's stack. (Copy-on-write semantics ensure that > > or something similar. :) Thanks. I made it: In contrast to the glibc wrapper, the raw clone() system call accepts NULL as a stack argument (and clone3() likewise allows cl_args.stack to be NULL). In this case, the child uses a dupli‐ cate of the parent's stack. [...] >> the child gets separate copies of stack pages when either process >> modifies the stack.) In this case, for correct operation, the >> CLONE_VM option should not be specified. (If the child shares the >> parent's memory because of the use of the CLONE_VM flag, then no >> copy-on-write duplication occurs and chaos is likely to result.) > > +1 on this. This is very important to mention! > >> >> The order of the arguments also differs in the raw system call, >> and there are variations in the arguments across architectures, as >> detailed in the following paragraphs. > > _sigh_ don't remind me... arch/Kconfig -- "ABI hall of shame" :-) >> The raw system call interface on x86-64 and some other architec‐ >> tures (including sh, tile, ia-64, and alpha) is: >> >> long clone(unsigned long flags, void *stack, >> int *parent_tid, int *child_tid, >> unsigned long tls); > > I wouldn't even mention clone() for ia64 anymore. It will _not_ work > correctly at all. ia64 requires stack_size as it expects the stack to be > passed pointing to the lowest address but the clone() version for ia64 > does not have a stack_size argument... So the only way to get clone() to > work on ia64 is by using the ia64 specific clone2(). Fair enough. I removed mention of is-64 here. >> On x86-32, and several other common architectures (including >> score, ARM, ARM 64, PA-RISC, arc, Power PC, xtensa, and MIPS), the >> order of the last two arguments is reversed: >> >> long clone(unsigned long flags, void *stack, >> int *parent_tid, unsigned long tls, >> int *child_tid); >> >> On the cris and s390 architectures, the order of the first two >> arguments is reversed: >> >> long clone(void *stack, unsigned long flags, >> int *parent_tid, int *child_tid, >> unsigned long tls); >> >> On the microblaze architecture, an additional argument is sup‐ >> plied: >> >> long clone(unsigned long flags, void *stack, >> int stack_size, /* Size of stack */ >> int *parent_tid, int *child_tid, >> unsigned long tls); > > The additional argument is stack_size and contrary to what one would > expect _ignored_. I.e. on microblaze one still needs to pass stack > pointing to the top of the stack. I added this sentence: Although a stack_size argument is provided, stack must still point to the top of the stack. >> blackfin, m68k, and sparc >> The argument-passing conventions on blackfin, m68k, and sparc are >> different from the descriptions above. For details, see the ker‐ >> nel (and glibc) source. >> >> ia64 >> On ia64, a different interface is used: >> >> int __clone2(int (*fn)(void *), >> void *stack_base, size_t stack_size, >> int flags, void *arg, ... >> /* pid_t *parent_tid, struct user_desc *tls, >> pid_t *child_tid */ ); >> >> The prototype shown above is for the glibc wrapper function; for >> the system call itself, the prototype can be described as follows >> (it is identical to the clone() prototype on microblaze): >> >> long clone2(unsigned long flags, void *stack_base, >> int stack_size, /* Size of stack */ >> int *parent_tid, int *child_tid, >> unsigned long tls); >> >> __clone2() operates in the same way as clone(), except that >> stack_base points to the lowest address of the child's stack area, >> and stack_size specifies the size of the stack pointed to by >> stack_base. >> >> Linux 2.4 and earlier >> In Linux 2.4 and earlier, clone() does not take arguments par‐ >> ent_tid, tls, and child_tid. >> >> RETURN VALUE >> On success, the thread ID of the child process is returned in the >> caller's thread of execution. On failure, -1 is returned in the >> caller's context, no child process will be created, and errno will >> be set appropriately. >> >> ERRORS >> EAGAIN Too many processes are already running; see fork(2). >> >> EINVAL CLONE_SIGHAND was specified, but CLONE_VM was not. (Since >> Linux 2.6.0.) >> >> EINVAL CLONE_THREAD was specified, but CLONE_SIGHAND was not. >> (Since Linux 2.5.35.) >> >> EINVAL CLONE_THREAD was specified, but the current process previ‐ >> ously called unshare(2) with the CLONE_NEWPID flag or used >> setns(2) to reassociate itself with a PID namespace. >> >> EINVAL Both CLONE_FS and CLONE_NEWNS were specified in flags. >> >> EINVAL (since Linux 3.9) >> Both CLONE_NEWUSER and CLONE_FS were specified in flags. >> >> EINVAL Both CLONE_NEWIPC and CLONE_SYSVSEM were specified in >> flags. >> >> EINVAL One (or both) of CLONE_NEWPID or CLONE_NEWUSER and one (or >> both) of CLONE_THREAD or CLONE_PARENT were specified in >> flags. >> >> EINVAL Returned by the glibc clone() wrapper function when fn or >> stack is specified as NULL. >> >> EINVAL CLONE_NEWIPC was specified in flags, but the kernel was not >> configured with the CONFIG_SYSVIPC and CONFIG_IPC_NS >> options. >> >> EINVAL CLONE_NEWNET was specified in flags, but the kernel was not >> configured with the CONFIG_NET_NS option. >> >> EINVAL CLONE_NEWPID was specified in flags, but the kernel was not >> configured with the CONFIG_PID_NS option. >> >> EINVAL CLONE_NEWUSER was specified in flags, but the kernel was >> not configured with the CONFIG_USER_NS option. >> >> EINVAL CLONE_NEWUTS was specified in flags, but the kernel was not >> configured with the CONFIG_UTS_NS option. >> >> EINVAL stack is not aligned to a suitable boundary for this archi‐ >> tecture. For example, on aarch64, stack must be a multiple >> of 16. > > If the stack was created with mmap(NULL, ...) as outlined above this > should be taken care of, I think. Because mmap() will return a page-aligned address? But, see my comments above. >> EINVAL CLONE_PIDFD was specified together with CLONE_DETACHED. > > Should be: > > EINVAL (clone3() only) > CLONE_DETACHED was specified (only with clone3()). > > EINVAL (clone() only) > CLONE_PIDFD was specified together with CLONE_DETACHED I made it: EINVAL (clone3() only) CLONE_DETACHED was specified in the flags mask. EINVAL (clone() only) CLONE_PIDFD was specified together with CLONE_DETACHED in the flags mask. Okay? >> >> EINVAL CLONE_PIDFD was specified together with CLONE_THREAD. >> >> EINVAL (clone() only) >> CLONE_PIDFD was specified together with CLONE_PARENT_SET‐ >> TID. >> >> ENOMEM Cannot allocate sufficient memory to allocate a task struc‐ >> ture for the child, or to copy those parts of the caller's >> context that need to be copied. >> >> ENOSPC (since Linux 3.7) >> CLONE_NEWPID was specified in flags, but the limit on the >> nesting depth of PID namespaces would have been exceeded; >> see pid_namespaces(7). >> >> ENOSPC (since Linux 4.9; beforehand EUSERS) >> CLONE_NEWUSER was specified in flags, and the call would >> cause the limit on the number of nested user namespaces to >> be exceeded. See user_namespaces(7). >> >> From Linux 3.11 to Linux 4.8, the error diagnosed in this >> case was EUSERS. >> >> ENOSPC (since Linux 4.9) >> One of the values in flags specified the creation of a new >> user namespace, but doing so would have caused the limit >> defined by the corresponding file in /proc/sys/user to be >> exceeded. For further details, see namespaces(7). >> >> EPERM CLONE_NEWCGROUP, CLONE_NEWIPC, CLONE_NEWNET, CLONE_NEWNS, >> CLONE_NEWPID, or CLONE_NEWUTS was specified by an unprivi‐ >> leged process (process without CAP_SYS_ADMIN). >> >> EPERM CLONE_PID was specified by a process other than process 0. >> (This error occurs only on Linux 2.5.15 and earlier.) >> >> EPERM CLONE_NEWUSER was specified in flags, but either the effec‐ >> tive user ID or the effective group ID of the caller does >> not have a mapping in the parent namespace (see user_names‐ >> paces(7)). >> >> EPERM (since Linux 3.9) >> CLONE_NEWUSER was specified in flags and the caller is in a >> chroot environment (i.e., the caller's root directory does >> not match the root directory of the mount namespace in >> which it resides). >> >> ERESTARTNOINTR (since Linux 2.6.17) >> System call was interrupted by a signal and will be >> restarted. (This can be seen only during a trace.) >> >> EUSERS (Linux 3.11 to Linux 4.8) >> CLONE_NEWUSER was specified in flags, and the limit on the >> number of nested user namespaces would be exceeded. See >> the discussion of the ENOSPC error above. >> >> VERSIONS >> The clone3() system call first appeared in Linux 5.3. >> >> CONFORMING TO >> These system calls are Linux-specific and should not be used in >> programs intended to be portable. >> >> NOTES >> The kcmp(2) system call can be used to test whether two processes >> share various resources such as a file descriptor table, System V >> semaphore undo operations, or a virtual address space. >> >> Handlers registered using pthread_atfork(3) are not executed dur‐ >> ing a call to clone(). >> >> In the Linux 2.4.x series, CLONE_THREAD generally does not make >> the parent of the new thread the same as the parent of the calling >> process. However, for kernel versions 2.4.7 to 2.4.18 the >> CLONE_THREAD flag implied the CLONE_PARENT flag (as in Linux 2.6.0 >> and later). >> >> For a while there was CLONE_DETACHED (introduced in 2.5.32): par‐ >> ent wants no child-exit signal. In Linux 2.6.2, the need to give >> this flag together with CLONE_THREAD disappeared. This flag is >> still defined, but has no effect. > > This is clone() specific and not true when passed together with > CLONE_PIDFD. clone3() will EINVAL all instances where CLONE_DETACHED is > passed. Yes. See above. The paragraph just above has now been removed from the page, in favor of the other text that I added (as described above). >> >> On i386, clone() should not be called through vsyscall, but >> directly through int $0x80. >> >> BUGS >> GNU C library versions 2.3.4 up to and including 2.24 contained a >> wrapper function for getpid(2) that performed caching of PIDs. >> This caching relied on support in the glibc wrapper for clone(), >> but limitations in the implementation meant that the cache was not >> up to date in some circumstances. In particular, if a signal was >> delivered to the child immediately after the clone() call, then a >> call to getpid(2) in a handler for the signal could return the PID >> of the calling process ("the parent"), if the clone wrapper had >> not yet had a chance to update the PID cache in the child. (This >> discussion ignores the case where the child was created using >> CLONE_THREAD, when getpid(2) should return the same value in the >> child and in the process that called clone(), since the caller and >> the child are in the same thread group. The stale-cache problem >> also does not occur if the flags argument includes CLONE_VM.) To >> get the truth, it was sometimes necessary to use code such as the >> following: >> >> #include <syscall.h> >> >> pid_t mypid; >> >> mypid = syscall(SYS_getpid); >> >> Because of the stale-cache problem, as well as other problems >> noted in getpid(2), the PID caching feature was removed in glibc >> 2.25. >> >> EXAMPLE >> The following program demonstrates the use of clone() to create a >> child process that executes in a separate UTS namespace. The >> child changes the hostname in its UTS namespace. Both parent and >> child then display the system hostname, making it possible to see >> that the hostname differs in the UTS namespaces of the parent and >> child. For an example of the use of this program, see setns(2). >> >> Program source >> #define _GNU_SOURCE >> #include <sys/wait.h> >> #include <sys/utsname.h> >> #include <sched.h> >> #include <string.h> >> #include <stdio.h> >> #include <stdlib.h> >> #include <unistd.h> >> >> #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \ >> } while (0) >> >> static int /* Start function for cloned child */ >> childFunc(void *arg) >> { >> struct utsname uts; >> >> /* Change hostname in UTS namespace of child */ >> >> if (sethostname(arg, strlen(arg)) == -1) >> errExit("sethostname"); >> >> /* Retrieve and display hostname */ >> >> if (uname(&uts) == -1) >> errExit("uname"); >> printf("uts.nodename in child: %s\n", uts.nodename); >> >> /* Keep the namespace open for a while, by sleeping. >> This allows some experimentation--for example, another >> process might join the namespace. */ >> >> sleep(200); >> >> return 0; /* Child terminates now */ >> } >> >> #define STACK_SIZE (1024 * 1024) /* Stack size for cloned child */ >> >> int >> main(int argc, char *argv[]) >> { >> char *stack; /* Start of stack buffer */ >> char *stackTop; /* End of stack buffer */ >> pid_t pid; >> struct utsname uts; >> >> if (argc < 2) { >> fprintf(stderr, "Usage: %s <child-hostname>\n", argv[0]); >> exit(EXIT_SUCCESS); >> } >> >> /* Allocate stack for child */ >> >> stack = malloc(STACK_SIZE); > > I'd really change this to mmap() since it makes some of the requirements > more obvious including the MAP_STACK flag. See my comments above. Thanks for the detailed feedback, Christian! Cheers, Michael -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-09 8:09 ` Michael Kerrisk (man-pages) @ 2019-11-09 16:53 ` Christian Brauner 2019-11-11 9:02 ` Michael Kerrisk (man-pages) 2019-11-11 14:55 ` Jann Horn 1 sibling, 1 reply; 30+ messages in thread From: Christian Brauner @ 2019-11-09 16:53 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn, Ingo Molnar On Sat, Nov 09, 2019 at 09:09:51AM +0100, Michael Kerrisk (man-pages) wrote: > [CC += Ingo, in case he has something to add re MAP_STACK; perhaps > Florian also might have some thoughts] Good idea. > >> NAME > >> clone, __clone2 - create a child process > > > > Should this include clone3()? > > > >> > >> SYNOPSIS > >> /* Prototype for the glibc wrapper function */ > >> > >> #define _GNU_SOURCE > >> #include <sched.h> > >> > >> int clone(int (*fn)(void *), void *stack, int flags, void *arg, ... > >> /* pid_t *parent_tid, void *tls, pid_t *child_tid */ ); > > > > I've always been confused by the "..." for the glibc wrapper. The glibc > > prototype in bits/sched.h also looks like this: > > I'm not sure that I understand your confusion. The point is, it's a > variadic function: the extra arguments are only ever touched if the > relevant flags are specified. Sure. My confusion is why it is a) variadic in the first place and b) even if it is can't we just advertise it as non-variadic since these functions will not grow any additional arguments. > > Or maybe you just meant: "this should not be a variadic function, > but rather that all 7 arguments should always be specified"? But, > then I think the point is that clone() (and the underlying syscall) > did not always have this number of arguments. Before Linux 2.6, the > wrapper and syscall only had 4 arguments. Yeah, though I wonder whether this is all so ancient that it doesn't matter anymore at this point in time. > >> DESCRIPTION > >> These system calls create a new process, in a manner similar to > >> fork(2). > >> > >> Unlike fork(2), these system calls allow the child process to > >> share parts of its execution context with the calling process, > > > > Hm, sharing part of the execution context is not the only thing that > > clone{3}() does. > > True. That text has been in the page for 21 years. It probably needs > a new coat of paint... > > > Maybe something like: > > > > Unlike fork(2), these system calls allow to create a child process with > > different properties than its parent. For example, these syscalls allow > > the child to share various parts of the execution context with the > > calling process such as [...]. They also allow placing the process in a > > new set of namespaces. > > > > Just a thought. > > A good thought... > > I changed the text to read: > > Unlike fork(2), these system calls allow the child to be created > with various properties that differ from the parent. For example, > these system calls provide more precise control over what pieces > of execution context are shared between the calling process and > the child process. For example, using these system calls, the > caller can control whether or not the two processes share the vir‐ > tual address space, the table of file descriptors, and the table > of signal handlers. These system system calls also allow the new > child process to placed in separate namespaces(7). > > Okay? Nit: The second and thirs sentence both start with "For example". Otherwise sounds great. > > >> such as the virtual address space, the table of file descriptors, > >> and the table of signal handlers. (Note that on this manual page, > >> "calling process" normally corresponds to "parent process". But > >> see the description of CLONE_PARENT below.) > >> > >> This page describes the following interfaces: > >> > >> * The glibc clone() wrapper function and the underlying system > >> call on which it is based. The main text describes the wrapper > >> function; the differences for the raw system call are described > >> toward the end of this page. > >> > >> * The newer clone3() system call. > >> > >> The clone() wrapper function > >> When the child process is created with the clone() wrapper func‐ > >> tion, it commences execution by calling the function pointed to by > >> the argument fn. (This differs from fork(2), where execution con‐ > >> tinues in the child from the point of the fork(2) call.) The arg > >> argument is passed as the argument of the function fn. > >> > >> When the fn(arg) function returns, the child process terminates. > >> The integer returned by fn is the exit status for the child > >> process. The child process may also terminate explicitly by call‐ > >> ing exit(2) or after receiving a fatal signal. > >> > >> The stack argument specifies the location of the stack used by the > >> child process. Since the child and calling process may share mem‐ > >> ory, it is not possible for the child process to execute in the > >> same stack as the calling process. The calling process must > >> therefore set up memory space for the child stack and pass a > >> pointer to this space to clone(). Stacks grow downward on all > > > > It might be a good idea to advise people to use mmap() to create a > > stack. The "canonical" way of doing this would usually be something like > > > > #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ > > void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); > > > > (Yes, the MAP_STACK is usally a noop but people should always include it > > in case some arch will have weird alignment requirement in which case > > this flag can be changed to actually do something...) > > So, I'm getting a little bit of an education here, and maybe you are > going to further educate me. Long ago, I added the documentation of > MAP_STACK to mmap(2), but I never quite connected the dots. > > However, you say MAP_STACK is *usually* a noop. As far as I can see, > in current kernels it is *always* a noop. And AFAICS, since it was first > added in 2.6.27 (2008), it has always been a noop. > > I wonder if it will always be a noop. > > If we go back and look at the commit: > > [[ > commit 2fdc86901d2ab30a12402b46238951d2a7891590 > Author: Ingo Molnar <mingo@elte.hu> > Date: Wed Aug 13 18:02:18 2008 +0200 > > x86: add MAP_STACK mmap flag > > as per this discussion: > > http://lkml.org/lkml/2008/8/12/423 > > Pardo reported that 64-bit threaded apps, if their stacks exceed the > combined size of ~4GB, slow down drastically in pthread_create() - because > glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is > a legacy hack - to speed up context switching on certain early model > 64-bit P4 CPUs. > > So introduce a new flag to be used by glibc instead, to not constrain > 64-bit apps like this. > > glibc can switch to this new flag straight away - it will be ignored > by the kernel. If those old CPUs ever matter to anyone, support for > it can be implemented. > ]] > > And see also https://lwn.net/Articles/294642/ > > So, my understanding from the above is that MAP_STACK was added to > allow a possible fix on some old architectures, should anyone decide it > was worth doing the work of implementing it. But so far, after 12 years, > no one did. It kind of looks like no one ever will (since those old > architectures become less and less relevant). > > So, AFAICT, while it's not wrong to tell people to use mmap(MAP_STACKED), > it doesn't provide any benefit (and perhaps never will), and it is a > more clumsy than plain old malloc(). Apart from MAP_STACK at some point (however unlikely) becoming relevant I also like that mmap() makes it explicit that the page needs to be readable (PROT_READ) and writeable (PROT_WRITE) and also every (relevant) libc I know uses the explicit mmap() in their pthread implementation. If you prefer the malloc() as an example that's obviously fine. > Yeah, but I didn't get mentioned in the commit ;-) You provided your Ack after I had taken the patch into my tree and I've already changed it once for Arnd's ack so I didn't want to change it again. > >> CLONE_NEWUTS (since Linux 2.6.19) > >> If CLONE_NEWUTS is set, then create the process in a new > >> UTS namespace, whose identifiers are initialized by dupli‐ > >> cating the identifiers from the UTS namespace of the call‐ > >> ing process. If this flag is not set, then (as with > >> fork(2)) the process is created in the same UTS namespace > >> as the calling process. This flag is intended for the > >> implementation of containers. > >> > >> A UTS namespace is the set of identifiers returned by > >> uname(2); among these, the domain name and the hostname can > >> be modified by setdomainname(2) and sethostname(2), respec‐ > >> tively. Changes made to the identifiers in a UTS namespace > >> are visible to all other processes in the same namespace, > >> but are not visible to processes in other UTS namespaces. > > > > Might again be a little too detailed but that's just my opinion. :) > > I agree. The thing is that the clone(2) text was written long before > the section 7 namespaces manual pages, and some duplication occurred. > I've removed this text, and done the same for the corresponding text > in CLONE_NEWNET and CLONE_NEWIPC. Excellent. > I changed the text here to read: > > CLONE_PID (Linux 2.0 to 2.5.15) > If CLONE_PID is set, the child process is created with the > same process ID as the calling process. This is good for > hacking the system, but otherwise of not much use. From > Linux 2.3.21 onward, this flag could be specified only by > the system boot process (PID 0). The flag disappeared com‐ > pletely from the kernel sources in Linux 2.5.16. Subse‐ > quently, the kernel silently ignored this bit if it was > specified in the flags mask. Much later, the same bit was > recycled for use as the CLONE_PIDFD flag. Yip, sounds good. > CLONE_DETACHED (historical) > For a while (during the Linux 2.5 development series) there > was a CLONE_DETACHED flag, which caused the parent not to > receive a signal when the child terminated. Ultimately, > the effect of this flag was subsumed under the CLONE_THREAD > flag and by the time Linux 2.6.0 was released, this flag > had no effect. Starting in Linux 2.6.2, the need to give > this flag together with CLONE_THREAD disappeared. > > This flag is still defined, but it is usually ignored when > calling clone(). However, see the description of > CLONE_PIDFD for some exceptions. > > And then under CLONE_PIDFD, I have: > > If the obsolete CLONE_DETACHED flag is specified alongside > CLONE_PIDFD when calling clone(), an error is returned. An > error also results if CLONE_DETACHED is specified when > calling clone3(). This error behavior ensures that the bit > corresponding to CLONE_DETACHED can be reused for further > PID file descriptor features in the future. > > Okay? Yip. > >> CLONE_SETTLS (since Linux 2.5.32) > >> The TLS (Thread Local Storage) descriptor is set to tls. > >> > >> The interpretation of tls and the resulting effect is > >> architecture dependent. On x86, tls is interpreted as a > >> struct user_desc * (see set_thread_area(2)). On x86-64 it > >> is the new value to be set for the %fs base register (see > >> the ARCH_SET_FS argument to arch_prctl(2)). On architec‐ > >> tures with a dedicated TLS register, it is the new value of > >> that register. > > > > Probably a gentle warning that this is a very advanced option and > > usually should not be used by callers other than libraries implementing > > threading or with specific use cases directly. > > I added: > > Use of this flag requires detailed knowledge and generally it > should not be used except in libraries implementing threading. Sounds good. > >> If any of the threads in a thread group performs an > >> execve(2), then all threads other than the thread group > >> leader are terminated, and the new program is executed in > > > > s/is executed in/becomes the/? > > Hmmm, a program is not a task, so this doesn't feel quite right. > Why don't you like the existing text? Just read odd to me "executed in the thread group leader". > > I won't do a deep review of the thread section now but you might want to > > mention that fatal signals always take down the whole thread-group, i.e. > > SIGKILL, SIGSEGV, etc... > > That point is covered above, in the paragraph that begins: "Signal > dispositions and actions are process-wide...". Does that not > suffice? This is probably too detailed from my end. Signals can be either thread-group-directed or thread-directed. That's one aspect. The other aspect is whether they are delivered thread-specific or thread-group-wide. While signals can be thread-group-directed kill() they are not necessarily delivered thread-group-wide. (I can go into details but that's not necessarily too useful for this manpage.) My point was just that mentioning fatal signals (e.g. SIGKILL, SIGSTOP) are always delivered thread-group-wide no matter if they are thread-group-directed or thread-directed. This might all be covered by your wording already and I just didn't read close enough. > >> Note that the glibc clone() wrapper function makes some changes in > >> the memory pointed to by stack (changes required to set the stack > >> up correctly for the child) before invoking the clone() system > > > > In essence, you can't really use the clone{3}() syscall with a stack > > argument directly without having to do some assembly. > > (Yes.) > > > User needing to > > mess with stacks are well-advised to use the glibc wrapper or need to > > really know what they are doing for _each_ arch they are using the > > syscall on. > > I understand the issues (I think), but it's not clear to me if > you mean that some text in the manual page needs changing. It might be worth mentioning that using it with a stack involves more than just allocating and passing it because people tend to assume that using the syscall (not the glibc wrapper) with a stack just works. So it's similar to the TLS comment we added with the difference that once we have a glibc wrapper for clone3() the stack argument becomes easier to use. > Thanks. I made it: > > In contrast to the glibc wrapper, the raw clone() system call > accepts NULL as a stack argument (and clone3() likewise allows > cl_args.stack to be NULL). In this case, the child uses a dupli‐ > cate of the parent's stack. [...] Sounds good. > > I wouldn't even mention clone() for ia64 anymore. It will _not_ work > > correctly at all. ia64 requires stack_size as it expects the stack to be > > passed pointing to the lowest address but the clone() version for ia64 > > does not have a stack_size argument... So the only way to get clone() to > > work on ia64 is by using the ia64 specific clone2(). > > Fair enough. I removed mention of is-64 here. Thanks. > >> long clone(unsigned long flags, void *stack, > >> int stack_size, /* Size of stack */ > >> int *parent_tid, int *child_tid, > >> unsigned long tls); > > > > The additional argument is stack_size and contrary to what one would > > expect _ignored_. I.e. on microblaze one still needs to pass stack > > pointing to the top of the stack. > > I added this sentence: > > Although a stack_size argument is provided, stack must still point > to the top of the stack. Thanks. > I made it: > > EINVAL (clone3() only) > CLONE_DETACHED was specified in the flags mask. > > EINVAL (clone() only) > CLONE_PIDFD was specified together with CLONE_DETACHED in > the flags mask. > > Okay? Yip. > Thanks for the detailed feedback, Christian! Thanks for the detailed manpage. Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-09 16:53 ` Christian Brauner @ 2019-11-11 9:02 ` Michael Kerrisk (man-pages) 2019-11-11 11:36 ` Christian Brauner 0 siblings, 1 reply; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-11-11 9:02 UTC (permalink / raw) To: Christian Brauner Cc: mtk.manpages, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn, Ingo Molnar Hello Christian, [...] >>>> These system calls create a new process, in a manner similar to >>>> fork(2). >>>> >>>> Unlike fork(2), these system calls allow the child process to >>>> share parts of its execution context with the calling process, >>> >>> Hm, sharing part of the execution context is not the only thing that >>> clone{3}() does. >> >> True. That text has been in the page for 21 years. It probably needs >> a new coat of paint... >> >>> Maybe something like: >>> >>> Unlike fork(2), these system calls allow to create a child process with >>> different properties than its parent. For example, these syscalls allow >>> the child to share various parts of the execution context with the >>> calling process such as [...]. They also allow placing the process in a >>> new set of namespaces. >>> >>> Just a thought. >> >> A good thought... >> >> I changed the text to read: >> >> Unlike fork(2), these system calls allow the child to be created >> with various properties that differ from the parent. For example, >> these system calls provide more precise control over what pieces >> of execution context are shared between the calling process and >> the child process. For example, using these system calls, the >> caller can control whether or not the two processes share the vir‐ >> tual address space, the table of file descriptors, and the table >> of signal handlers. These system system calls also allow the new >> child process to placed in separate namespaces(7). >> >> Okay? > > Nit: The second and thirs sentence both start with "For example". > Otherwise sounds great. You gotta love it when the nonnative speaker points out the style errors of the native speaker :-). I fixed this. [...] >>>> The stack argument specifies the location of the stack used by the >>>> child process. Since the child and calling process may share mem‐ >>>> ory, it is not possible for the child process to execute in the >>>> same stack as the calling process. The calling process must >>>> therefore set up memory space for the child stack and pass a >>>> pointer to this space to clone(). Stacks grow downward on all >>> >>> It might be a good idea to advise people to use mmap() to create a >>> stack. The "canonical" way of doing this would usually be something like >>> >>> #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ >>> void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); >>> >>> (Yes, the MAP_STACK is usally a noop but people should always include it >>> in case some arch will have weird alignment requirement in which case >>> this flag can be changed to actually do something...) >> >> So, I'm getting a little bit of an education here, and maybe you are >> going to further educate me. Long ago, I added the documentation of >> MAP_STACK to mmap(2), but I never quite connected the dots. >> >> However, you say MAP_STACK is *usually* a noop. As far as I can see, >> in current kernels it is *always* a noop. And AFAICS, since it was first >> added in 2.6.27 (2008), it has always been a noop. >> >> I wonder if it will always be a noop. >> >> If we go back and look at the commit: >> >> [[ >> commit 2fdc86901d2ab30a12402b46238951d2a7891590 >> Author: Ingo Molnar <mingo@elte.hu> >> Date: Wed Aug 13 18:02:18 2008 +0200 >> >> x86: add MAP_STACK mmap flag >> >> as per this discussion: >> >> http://lkml.org/lkml/2008/8/12/423 >> >> Pardo reported that 64-bit threaded apps, if their stacks exceed the >> combined size of ~4GB, slow down drastically in pthread_create() - because >> glibc uses MAP_32BIT to allocate the stacks. The use of MAP_32BIT is >> a legacy hack - to speed up context switching on certain early model >> 64-bit P4 CPUs. >> >> So introduce a new flag to be used by glibc instead, to not constrain >> 64-bit apps like this. >> >> glibc can switch to this new flag straight away - it will be ignored >> by the kernel. If those old CPUs ever matter to anyone, support for >> it can be implemented. >> ]] >> >> And see also https://lwn.net/Articles/294642/ >> >> So, my understanding from the above is that MAP_STACK was added to >> allow a possible fix on some old architectures, should anyone decide it >> was worth doing the work of implementing it. But so far, after 12 years, >> no one did. It kind of looks like no one ever will (since those old >> architectures become less and less relevant). >> >> So, AFAICT, while it's not wrong to tell people to use mmap(MAP_STACKED), >> it doesn't provide any benefit (and perhaps never will), and it is a >> more clumsy than plain old malloc(). > > Apart from MAP_STACK at some point (however unlikely) becoming relevant > I also like that mmap() makes it explicit that the page needs to be > readable (PROT_READ) and writeable (PROT_WRITE) and also every > (relevant) libc I know uses the explicit mmap() in their pthread > implementation. If you prefer the malloc() as an example that's > obviously fine. I think the benefits you point out are not so significant. The default assumption is that a given piece of memory is readable and writable. Does musl use MAP_STACKED? AFAICT, it doesn't. I suppose it's not that I prefer malloc(), but rather that (first I was ignorant, and second that) I prefer simplicity. In fact I even set up a branch to change various pieces of code I had to use MAP_STACKED, and then had an "if I had thought about this for 30 minutes, I might have saved myself a couple of hours of work" moment after I researched the history of MAP_STACKED a little. I still don't know the answer for sure. I'm inclined to leave things as they are until I hear a compelling argument to change things. >> Yeah, but I didn't get mentioned in the commit ;-) > > You provided your Ack after I had taken the patch into my tree and I've > already changed it once for Arnd's ack so I didn't want to change it > again. Yes. But I *motivated* the commit :-). Just saying. I'm not too concerned! [...] >> I changed the text here to read: >> >> CLONE_PID (Linux 2.0 to 2.5.15) >> If CLONE_PID is set, the child process is created with the >> same process ID as the calling process. This is good for >> hacking the system, but otherwise of not much use. From >> Linux 2.3.21 onward, this flag could be specified only by >> the system boot process (PID 0). The flag disappeared com‐ >> pletely from the kernel sources in Linux 2.5.16. Subse‐ >> quently, the kernel silently ignored this bit if it was >> specified in the flags mask. Much later, the same bit was >> recycled for use as the CLONE_PIDFD flag. > > Yip, sounds good. Are you making fun of my accent? ;-) Thanks again for your feedback, Christian. Cheers, Michael -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 9:02 ` Michael Kerrisk (man-pages) @ 2019-11-11 11:36 ` Christian Brauner 2019-11-11 19:56 ` Michael Kerrisk (man-pages) 0 siblings, 1 reply; 30+ messages in thread From: Christian Brauner @ 2019-11-11 11:36 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn, Ingo Molnar On Mon, Nov 11, 2019 at 10:02:30AM +0100, Michael Kerrisk (man-pages) wrote: > > Yip, sounds good. > > Are you making fun of my accent? ;-) I hope that's no a serious question. Of course not. :) I've been using "yip" quite often. ;) https://lore.kernel.org/r/20190531221356.uekyzxhtuijgj4pg@brauner.io https://lore.kernel.org/r/20190924061950.cu6aosio57pz4r3m@wittgenstein > > Thanks again for your feedback, Christian. Thanks for the manpage! Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 11:36 ` Christian Brauner @ 2019-11-11 19:56 ` Michael Kerrisk (man-pages) 0 siblings, 0 replies; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-11-11 19:56 UTC (permalink / raw) To: Christian Brauner Cc: mtk.manpages, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn, Ingo Molnar On 11/11/19 12:36 PM, Christian Brauner wrote: > On Mon, Nov 11, 2019 at 10:02:30AM +0100, Michael Kerrisk (man-pages) wrote: >>> Yip, sounds good. >> >> Are you making fun of my accent? ;-) > > I hope that's no a serious question. Of course not. :) I know. I'm just playing about with with a common joke about what Kiwis do with their vowels ;-). -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-09 8:09 ` Michael Kerrisk (man-pages) 2019-11-09 16:53 ` Christian Brauner @ 2019-11-11 14:55 ` Jann Horn 2019-11-11 16:58 ` Theodore Y. Ts'o 2019-11-14 12:15 ` Michael Kerrisk (man-pages) 1 sibling, 2 replies; 30+ messages in thread From: Jann Horn @ 2019-11-11 14:55 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Christian Brauner, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar On Sat, Nov 9, 2019 at 9:10 AM Michael Kerrisk (man-pages) <mtk.manpages@gmail.com> wrote: [...] > On 11/7/19 4:19 PM, Christian Brauner wrote: > > On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: [...] > >> The stack argument specifies the location of the stack used by the > >> child process. Since the child and calling process may share mem‐ > >> ory, it is not possible for the child process to execute in the > >> same stack as the calling process. The calling process must > >> therefore set up memory space for the child stack and pass a > >> pointer to this space to clone(). Stacks grow downward on all > > > > It might be a good idea to advise people to use mmap() to create a > > stack. The "canonical" way of doing this would usually be something like > > > > #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ > > void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); > > > > (Yes, the MAP_STACK is usally a noop but people should always include it > > in case some arch will have weird alignment requirement in which case > > this flag can be changed to actually do something...) > > So, I'm getting a little bit of an education here, and maybe you are > going to further educate me. Long ago, I added the documentation of > MAP_STACK to mmap(2), but I never quite connected the dots. > > However, you say MAP_STACK is *usually* a noop. As far as I can see, > in current kernels it is *always* a noop. And AFAICS, since it was first > added in 2.6.27 (2008), it has always been a noop. > > I wonder if it will always be a noop. [...] > So, my understanding from the above is that MAP_STACK was added to > allow a possible fix on some old architectures, should anyone decide it > was worth doing the work of implementing it. But so far, after 12 years, > no one did. It kind of looks like no one ever will (since those old > architectures become less and less relevant). > > So, AFAICT, while it's not wrong to tell people to use mmap(MAP_STACKED), > it doesn't provide any benefit (and perhaps never will), and it is a > more clumsy than plain old malloc(). > > But, it could well be that there's something I still don't know here, > and I'd be interested to get further education. Not on Linux, but on OpenBSD, they do use MAP_STACK now AFAIK; this was announced here: <http://openbsd-archive.7691.n7.nabble.com/stack-register-checking-td338238.html>. Basically they periodically check whether the userspace stack pointer points into a MAP_STACK region, and if not, they kill the process. So even if it's a no-op on Linux, it might make sense to advise people to use the flag to improve portability? I'm not sure if that's something that belongs in Linux manpages. Another reason against malloc() is that when setting up thread stacks in proper, reliable software, you'll probably want to place a guard page (in other words, a 4K PROT_NONE VMA) at the bottom of the stack to reliably catch stack overflows; and you probably don't want to do that with malloc, in particular with non-page-aligned allocations. ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 14:55 ` Jann Horn @ 2019-11-11 16:58 ` Theodore Y. Ts'o 2019-11-11 20:24 ` Jann Horn 2019-11-14 12:15 ` Michael Kerrisk (man-pages) 1 sibling, 1 reply; 30+ messages in thread From: Theodore Y. Ts'o @ 2019-11-11 16:58 UTC (permalink / raw) To: Jann Horn Cc: Michael Kerrisk (man-pages), Christian Brauner, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar On Mon, Nov 11, 2019 at 03:55:35PM +0100, Jann Horn wrote: > Not on Linux, but on OpenBSD, they do use MAP_STACK now AFAIK; this > was announced here: > <http://openbsd-archive.7691.n7.nabble.com/stack-register-checking-td338238.html>. > Basically they periodically check whether the userspace stack pointer > points into a MAP_STACK region, and if not, they kill the process. So > even if it's a no-op on Linux... Hmm, is that something we should do in Linux? Even if we only check on syscall entry, which should be pretty inexpensive, it seems like it would be very effective in protecting various ROP techniques. - Ted ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 16:58 ` Theodore Y. Ts'o @ 2019-11-11 20:24 ` Jann Horn 2019-11-12 23:03 ` Kees Cook 0 siblings, 1 reply; 30+ messages in thread From: Jann Horn @ 2019-11-11 20:24 UTC (permalink / raw) To: Theodore Y. Ts'o Cc: Michael Kerrisk (man-pages), Christian Brauner, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar On Mon, Nov 11, 2019 at 5:58 PM Theodore Y. Ts'o <tytso@mit.edu> wrote: > On Mon, Nov 11, 2019 at 03:55:35PM +0100, Jann Horn wrote: > > Not on Linux, but on OpenBSD, they do use MAP_STACK now AFAIK; this > > was announced here: > > <http://openbsd-archive.7691.n7.nabble.com/stack-register-checking-td338238.html>. > > Basically they periodically check whether the userspace stack pointer > > points into a MAP_STACK region, and if not, they kill the process. So > > even if it's a no-op on Linux... > > Hmm, is that something we should do in Linux? Even if we only check > on syscall entry, which should be pretty inexpensive, it seems like it > would be very effective in protecting various ROP techniques. I'm not a big fan, especially if that would only happen on syscall entry; at the point where you have enough control to perform syscalls, it probably isn't too difficult to move your ROP stack over to a legitimate stack. ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 20:24 ` Jann Horn @ 2019-11-12 23:03 ` Kees Cook 0 siblings, 0 replies; 30+ messages in thread From: Kees Cook @ 2019-11-12 23:03 UTC (permalink / raw) To: Jann Horn Cc: Theodore Y. Ts'o, Michael Kerrisk (man-pages), Christian Brauner, Florian Weimer, Christian Brauner, lkml, linux-man, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar On Mon, Nov 11, 2019 at 09:24:33PM +0100, Jann Horn wrote: > On Mon, Nov 11, 2019 at 5:58 PM Theodore Y. Ts'o <tytso@mit.edu> wrote: > > On Mon, Nov 11, 2019 at 03:55:35PM +0100, Jann Horn wrote: > > > Not on Linux, but on OpenBSD, they do use MAP_STACK now AFAIK; this > > > was announced here: > > > <http://openbsd-archive.7691.n7.nabble.com/stack-register-checking-td338238.html>. > > > Basically they periodically check whether the userspace stack pointer > > > points into a MAP_STACK region, and if not, they kill the process. So > > > even if it's a no-op on Linux... > > > > Hmm, is that something we should do in Linux? Even if we only check > > on syscall entry, which should be pretty inexpensive, it seems like it > > would be very effective in protecting various ROP techniques. > > I'm not a big fan, especially if that would only happen on syscall > entry; at the point where you have enough control to perform syscalls, > it probably isn't too difficult to move your ROP stack over to a > legitimate stack. It does have "your process is doing something unexpected" checking, though, if we want to declare (and enforce) the expected behavior of userspace stack usage. (i.e. not strictly as a ROP defense.) -- Kees Cook ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 14:55 ` Jann Horn 2019-11-11 16:58 ` Theodore Y. Ts'o @ 2019-11-14 12:15 ` Michael Kerrisk (man-pages) 2019-11-14 12:29 ` Christian Brauner 1 sibling, 1 reply; 30+ messages in thread From: Michael Kerrisk (man-pages) @ 2019-11-14 12:15 UTC (permalink / raw) To: Jann Horn Cc: mtk.manpages, Christian Brauner, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar Hello Jann, Christian, On 11/11/19 3:55 PM, Jann Horn wrote: > On Sat, Nov 9, 2019 at 9:10 AM Michael Kerrisk (man-pages) > <mtk.manpages@gmail.com> wrote: > [...] >> On 11/7/19 4:19 PM, Christian Brauner wrote: >>> On Fri, Oct 25, 2019 at 06:59:31PM +0200, Michael Kerrisk (man-pages) wrote: > [...] >>>> The stack argument specifies the location of the stack used by the >>>> child process. Since the child and calling process may share mem‐ >>>> ory, it is not possible for the child process to execute in the >>>> same stack as the calling process. The calling process must >>>> therefore set up memory space for the child stack and pass a >>>> pointer to this space to clone(). Stacks grow downward on all >>> >>> It might be a good idea to advise people to use mmap() to create a >>> stack. The "canonical" way of doing this would usually be something like >>> >>> #define DEFAULT_STACK_SIZE (4 * 1024 * 1024) /* 8 MB usually on Linux */ >>> void *stack = mmap(NULL, DEFAULT_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); >>> >>> (Yes, the MAP_STACK is usally a noop but people should always include it >>> in case some arch will have weird alignment requirement in which case >>> this flag can be changed to actually do something...) >> >> So, I'm getting a little bit of an education here, and maybe you are >> going to further educate me. Long ago, I added the documentation of >> MAP_STACK to mmap(2), but I never quite connected the dots. >> >> However, you say MAP_STACK is *usually* a noop. As far as I can see, >> in current kernels it is *always* a noop. And AFAICS, since it was first >> added in 2.6.27 (2008), it has always been a noop. >> >> I wonder if it will always be a noop. > [...] >> So, my understanding from the above is that MAP_STACK was added to >> allow a possible fix on some old architectures, should anyone decide it >> was worth doing the work of implementing it. But so far, after 12 years, >> no one did. It kind of looks like no one ever will (since those old >> architectures become less and less relevant). >> >> So, AFAICT, while it's not wrong to tell people to use mmap(MAP_STACKED), >> it doesn't provide any benefit (and perhaps never will), and it is a >> more clumsy than plain old malloc(). >> >> But, it could well be that there's something I still don't know here, >> and I'd be interested to get further education. > > Not on Linux, but on OpenBSD, they do use MAP_STACK now AFAIK; this > was announced here: > <http://openbsd-archive.7691.n7.nabble.com/stack-register-checking-td338238.html>. Indeed, thank you for that pointer. The OpenBSD mmap(2) manual page also says: MAP_STACK Indicate that the mapping is used as a stack. This flag must be used in combination with MAP_ANON and MAP_PRIVATE. > Basically they periodically check whether the userspace stack pointer > points into a MAP_STACK region, and if not, they kill the process. And I now see that FreeBSD also has MAP_STACK (already since FreeBSD 3.1, by the look of things!): MAP_STACK MAP_STACK implies MAP_ANON, ando ffset of 0. The fd argument must be -1 and prot must include at least PROT_READ and PROT_WRITE. This option creates a memory region that grows to at most len bytes in size, starting from the stack top and growing down. The stack top is the starting ad- dress returned by the call, plus len bytes. The bot- tom of the stack at maximum growth is the starting ad- dress returned by the call. Stacks created with MAP_STACK automatically grow. Guards prevent inadvertent use of the regions into which those stacks can grow without requiring mapping the whole stack in advance. And on DragonflyBSD: MAP_STACK Map the area as a stack. MAP_ANON is implied. Offset should be 0, fd must be -1, and prot should include at least PROT_READ and PROT_WRITE. This option creates a memory region that grows to at most len bytes in size, starting from the stack top and growing down. The stack top is the start‐ ing address returned by the call, plus len bytes. The bottom of the stack at maximum growth is the starting address returned by the call. The entire area is reserved from the point of view of other mmap() calls, even if not faulted in yet. WARNING! We currently allow MAP_STACK mappings to provide a hint that points within an existing MAP_STACK mapping's space, and this will succeed as long as no page have been faulted in the area specified, but this behavior is no longer sup‐ ported unless you also specify the MAP_TRYFIXED flag. Note that unless MAP_FIXED or MAP_TRYFIXED is used, you cannot count on the returned address matching the hint you have provided. > So > even if it's a no-op on Linux, it might make sense to advise people to > use the flag to improve portability? I'm not sure if that's something > that belongs in Linux manpages. Actually, the Linux manual pages frequently carry such hints, so this is a good point. > Another reason against malloc() is that when setting up thread stacks > in proper, reliable software, you'll probably want to place a guard > page (in other words, a 4K PROT_NONE VMA) at the bottom of the stack > to reliably catch stack overflows; and you probably don't want to do > that with malloc, in particular with non-page-aligned allocations. Ahh yes, another good point. I've fixed the example code in the manual page to use mmap(MAP_STACK), rather than malloc(), to allocate the stack. Thanks, Michael -- Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/ ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-14 12:15 ` Michael Kerrisk (man-pages) @ 2019-11-14 12:29 ` Christian Brauner 0 siblings, 0 replies; 30+ messages in thread From: Christian Brauner @ 2019-11-14 12:29 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Jann Horn, Florian Weimer, Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Ingo Molnar On Thu, Nov 14, 2019 at 01:15:58PM +0100, Michael Kerrisk (man-pages) wrote: > I've fixed the example code in the manual page to use > mmap(MAP_STACK), rather than malloc(), to allocate the stack. Thank you! Christian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) ` (3 preceding siblings ...) 2019-11-07 15:19 ` Christian Brauner @ 2019-11-11 15:03 ` Florian Weimer 2019-11-11 15:15 ` Jann Horn 4 siblings, 1 reply; 30+ messages in thread From: Florian Weimer @ 2019-11-11 15:03 UTC (permalink / raw) To: Michael Kerrisk (man-pages) Cc: Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API, Jann Horn * Michael Kerrisk: > Another difference for the raw clone() system call is that the > stack argument may be NULL, in which case the child uses a dupli‐ > cate of the parent's stack. (Copy-on-write semantics ensure that > the child gets separate copies of stack pages when either process > modifies the stack.) In this case, for correct operation, the > CLONE_VM option should not be specified. (If the child shares the > parent's memory because of the use of the CLONE_VM flag, then no > copy-on-write duplication occurs and chaos is likely to result.) I think sharing the stack also works with CLONE_VFORK with CLONE_VM, as long as measures are taken to preserve the return address in a register. Thanks, Florian ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 15:03 ` Florian Weimer @ 2019-11-11 15:15 ` Jann Horn 2019-11-11 15:20 ` Florian Weimer 0 siblings, 1 reply; 30+ messages in thread From: Jann Horn @ 2019-11-11 15:15 UTC (permalink / raw) To: Florian Weimer Cc: Michael Kerrisk (man-pages), Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API On Mon, Nov 11, 2019 at 4:03 PM Florian Weimer <fweimer@redhat.com> wrote: > > * Michael Kerrisk: > > > Another difference for the raw clone() system call is that the > > stack argument may be NULL, in which case the child uses a dupli‐ > > cate of the parent's stack. (Copy-on-write semantics ensure that > > the child gets separate copies of stack pages when either process > > modifies the stack.) In this case, for correct operation, the > > CLONE_VM option should not be specified. (If the child shares the > > parent's memory because of the use of the CLONE_VM flag, then no > > copy-on-write duplication occurs and chaos is likely to result.) > > I think sharing the stack also works with CLONE_VFORK with CLONE_VM, as > long as measures are taken to preserve the return address in a register. That basically just requires that the userspace function declaration for clone3 includes __attribute__((returns_twice)), right? ^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: For review: documentation of clone3() system call 2019-11-11 15:15 ` Jann Horn @ 2019-11-11 15:20 ` Florian Weimer 0 siblings, 0 replies; 30+ messages in thread From: Florian Weimer @ 2019-11-11 15:20 UTC (permalink / raw) To: Jann Horn Cc: Michael Kerrisk (man-pages), Christian Brauner, lkml, linux-man, Kees Cook, Oleg Nesterov, Arnd Bergmann, David Howells, Pavel Emelyanov, Andrew Morton, Adrian Reber, Andrei Vagin, Linux API * Jann Horn: > On Mon, Nov 11, 2019 at 4:03 PM Florian Weimer <fweimer@redhat.com> wrote: >> >> * Michael Kerrisk: >> >> > Another difference for the raw clone() system call is that the >> > stack argument may be NULL, in which case the child uses a dupli‐ >> > cate of the parent's stack. (Copy-on-write semantics ensure that >> > the child gets separate copies of stack pages when either process >> > modifies the stack.) In this case, for correct operation, the >> > CLONE_VM option should not be specified. (If the child shares the >> > parent's memory because of the use of the CLONE_VM flag, then no >> > copy-on-write duplication occurs and chaos is likely to result.) >> >> I think sharing the stack also works with CLONE_VFORK with CLONE_VM, as >> long as measures are taken to preserve the return address in a register. > > That basically just requires that the userspace function declaration > for clone3 includes __attribute__((returns_twice)), right? The clone3 implementation itself would have to store the return address in a register because at the time of the second return, a return address on the stack may have been corrupted by the subprocess because what used to be the stack frame of the clone function has since been reused for something else. __attribute__ ((returns_twice)) is likely needed as well, but that benefits the caller. It's also not clear that it is sufficient for this to work in all cases. (But the mandatory-to-implement vfork function faces the same problems.) Thanks, Florian ^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2019-11-14 12:29 UTC | newest] Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-10-25 16:59 For review: documentation of clone3() system call Michael Kerrisk (man-pages) 2019-10-25 17:07 ` Christian Brauner 2019-11-07 12:26 ` Michael Kerrisk (man-pages) 2019-10-26 2:28 ` G. Branden Robinson 2019-10-31 6:06 ` Michael Kerrisk (man-pages) 2019-10-28 15:12 ` Jann Horn 2019-10-28 17:21 ` Christian Brauner 2019-10-28 19:09 ` Jann Horn 2019-10-29 11:27 ` Christian Brauner 2019-10-29 14:26 ` Christian Brauner 2019-10-29 14:36 ` Florian Weimer 2019-10-29 16:04 ` Christian Brauner 2019-10-29 15:20 ` Jann Horn 2019-10-29 16:05 ` Christian Brauner 2019-11-07 15:19 ` Christian Brauner 2019-11-07 16:10 ` Florian Weimer 2019-11-09 8:09 ` Michael Kerrisk (man-pages) 2019-11-09 16:53 ` Christian Brauner 2019-11-11 9:02 ` Michael Kerrisk (man-pages) 2019-11-11 11:36 ` Christian Brauner 2019-11-11 19:56 ` Michael Kerrisk (man-pages) 2019-11-11 14:55 ` Jann Horn 2019-11-11 16:58 ` Theodore Y. Ts'o 2019-11-11 20:24 ` Jann Horn 2019-11-12 23:03 ` Kees Cook 2019-11-14 12:15 ` Michael Kerrisk (man-pages) 2019-11-14 12:29 ` Christian Brauner 2019-11-11 15:03 ` Florian Weimer 2019-11-11 15:15 ` Jann Horn 2019-11-11 15:20 ` Florian Weimer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).