[PATCH 0/3] DVFS support for Venus

[PATCH 0/3] DVFS support for Venus

[Rajendra Nayak]

These patches add DVFS support for Venus. Where posted
earlier as part of a series with multiple different drivers [1]
I have split them into specific driver changes in order to avoid
confusion on dependencies. Also added the corresponding device tree
changes for sdm845 and sc7180 platforms.

These patches are dependent on the bindings update [2] which is still
pending an ack from Rob.

Patch 1/3 will need to be picked by Stan and pushed via the linux-media tree.

DT patches (2/3 and 3/3) will need to land via the msm tree.

[1] https://lkml.org/lkml/2020/6/15/535
[2] https://lore.kernel.org/patchwork/patch/1241077/

Rajendra Nayak (3):
  media: venus: core: Add support for opp tables/perf voting
  arm64: dts: sdm845: Add OPP tables and power-domains for venus
  arm64: dts: sc7180: Add OPP tables and power-domains for venus

 arch/arm64/boot/dts/qcom/sc7180.dtsi           | 35 ++++++++++++++++-
 arch/arm64/boot/dts/qcom/sdm845.dtsi           | 40 ++++++++++++++++++-
 drivers/media/platform/qcom/venus/core.c       | 43 +++++++++++++++++---
 drivers/media/platform/qcom/venus/core.h       |  5 +++
 drivers/media/platform/qcom/venus/pm_helpers.c | 54 ++++++++++++++++++++++++--
 5 files changed, 163 insertions(+), 14 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH 1/3] media: venus: core: Add support for opp tables/perf voting

[Rajendra Nayak]

Add support to add OPP tables and perf voting on the OPP powerdomain.
This is needed so venus votes on the corresponding performance state
for the OPP powerdomain along with setting the core clock rate.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/media/platform/qcom/venus/core.c       | 43 +++++++++++++++++---
 drivers/media/platform/qcom/venus/core.h       |  5 +++
 drivers/media/platform/qcom/venus/pm_helpers.c | 54 ++++++++++++++++++++++++--
 3 files changed, 92 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 203c653..630f61b 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <media/videobuf2-v4l2.h>
 #include <media/v4l2-mem2mem.h>
@@ -216,21 +217,37 @@ static int venus_probe(struct platform_device *pdev)
 	if (!core->pm_ops)
 		return -ENODEV;
 
+	core->opp_table = dev_pm_opp_set_clkname(dev, "core");
+	if (IS_ERR(core->opp_table))
+		return PTR_ERR(core->opp_table);
+
+	if (core->res->opp_pmdomain) {
+		ret = dev_pm_opp_of_add_table(dev);
+		if (!ret) {
+			core->has_opp_table = true;
+		} else if (ret != -ENODEV) {
+			dev_err(dev, "invalid OPP table in device tree\n");
+			return ret;
+		}
+	}
+
 	if (core->pm_ops->core_get) {
 		ret = core->pm_ops->core_get(dev);
 		if (ret)
-			return ret;
+			goto err_opp_cleanup;
 	}
 
 	ret = dma_set_mask_and_coherent(dev, core->res->dma_mask);
 	if (ret)
-		return ret;
+		goto err_opp_cleanup;
 
 	if (!dev->dma_parms) {
 		dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
 					      GFP_KERNEL);
-		if (!dev->dma_parms)
-			return -ENOMEM;
+		if (!dev->dma_parms) {
+			ret = -ENOMEM;
+			goto err_opp_cleanup;
+		}
 	}
 	dma_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
@@ -242,11 +259,11 @@ static int venus_probe(struct platform_device *pdev)
 					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 					"venus", core);
 	if (ret)
-		return ret;
+		goto err_opp_cleanup;
 
 	ret = hfi_create(core, &venus_core_ops);
 	if (ret)
-		return ret;
+		goto err_opp_cleanup;
 
 	pm_runtime_enable(dev);
 
@@ -302,6 +319,10 @@ static int venus_probe(struct platform_device *pdev)
 	pm_runtime_set_suspended(dev);
 	pm_runtime_disable(dev);
 	hfi_destroy(core);
+err_opp_cleanup:
+	if (core->has_opp_table)
+		dev_pm_opp_of_remove_table(dev);
+	dev_pm_opp_put_clkname(core->opp_table);
 	return ret;
 }
 
@@ -326,6 +347,10 @@ static int venus_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
+	if (core->has_opp_table)
+		dev_pm_opp_of_remove_table(dev);
+	dev_pm_opp_put_clkname(core->opp_table);
+
 	if (pm_ops->core_put)
 		pm_ops->core_put(dev);
 
@@ -355,6 +380,10 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	/* Drop the performance state vote */
+	if (core->opp_pmdomain)
+		dev_pm_opp_set_rate(dev, 0);
+
 	if (pm_ops->core_power)
 		ret = pm_ops->core_power(dev, POWER_OFF);
 
@@ -520,6 +549,7 @@ static const struct venus_resources sdm845_res_v2 = {
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0", "vcodec1" },
 	.vcodec_pmdomains_num = 3,
+	.opp_pmdomain = (const char *[]) { "opp-pd", NULL },
 	.vcodec_num = 2,
 	.max_load = 3110400,	/* 4096x2160@90 */
 	.hfi_version = HFI_VERSION_4XX,
@@ -565,6 +595,7 @@ static const struct venus_resources sc7180_res = {
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0" },
 	.vcodec_pmdomains_num = 2,
+	.opp_pmdomain = (const char *[]) { "opp-pd", NULL },
 	.vcodec_num = 1,
 	.hfi_version = HFI_VERSION_4XX,
 	.vmem_id = VIDC_RESOURCE_NONE,
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index 7118612..b0cc544 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -62,6 +62,7 @@ struct venus_resources {
 	unsigned int vcodec_clks_num;
 	const char * const vcodec_pmdomains[VIDC_PMDOMAINS_NUM_MAX];
 	unsigned int vcodec_pmdomains_num;
+	const char **opp_pmdomain;
 	unsigned int vcodec_num;
 	enum hfi_version hfi_version;
 	u32 max_load;
@@ -145,8 +146,12 @@ struct venus_core {
 	struct clk *vcodec1_clks[VIDC_VCODEC_CLKS_NUM_MAX];
 	struct icc_path *video_path;
 	struct icc_path *cpucfg_path;
+	struct opp_table *opp_table;
+	bool has_opp_table;
 	struct device_link *pd_dl_venus;
 	struct device *pmdomains[VIDC_PMDOMAINS_NUM_MAX];
+	struct device_link *opp_dl_venus;
+	struct device *opp_pmdomain;
 	struct video_device *vdev_dec;
 	struct video_device *vdev_enc;
 	struct v4l2_device v4l2_dev;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index abf9315..4149ab8 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -9,6 +9,7 @@
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/types.h>
 #include <media/v4l2-mem2mem.h>
@@ -66,10 +67,9 @@ static void core_clks_disable(struct venus_core *core)
 
 static int core_clks_set_rate(struct venus_core *core, unsigned long freq)
 {
-	struct clk *clk = core->clks[0];
 	int ret;
 
-	ret = clk_set_rate(clk, freq);
+	ret = dev_pm_opp_set_rate(core->dev, freq);
 	if (ret)
 		return ret;
 
@@ -740,13 +740,16 @@ static int venc_power_v4(struct device *dev, int on)
 
 static int vcodec_domains_get(struct device *dev)
 {
+	int ret;
+	struct opp_table *opp_table;
+	struct device **opp_virt_dev;
 	struct venus_core *core = dev_get_drvdata(dev);
 	const struct venus_resources *res = core->res;
 	struct device *pd;
 	unsigned int i;
 
 	if (!res->vcodec_pmdomains_num)
-		return -ENODEV;
+		goto skip_pmdomains;
 
 	for (i = 0; i < res->vcodec_pmdomains_num; i++) {
 		pd = dev_pm_domain_attach_by_name(dev,
@@ -763,7 +766,41 @@ static int vcodec_domains_get(struct device *dev)
 	if (!core->pd_dl_venus)
 		return -ENODEV;
 
+skip_pmdomains:
+	if (!core->has_opp_table)
+		return 0;
+
+	/* Attach the power domain for setting performance state */
+	opp_table = dev_pm_opp_attach_genpd(dev, res->opp_pmdomain, &opp_virt_dev);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		goto opp_attach_err;
+	}
+
+	core->opp_pmdomain = *opp_virt_dev;
+	core->opp_dl_venus = device_link_add(dev, core->opp_pmdomain,
+					     DL_FLAG_RPM_ACTIVE |
+					     DL_FLAG_PM_RUNTIME |
+					     DL_FLAG_STATELESS);
+	if (!core->opp_dl_venus) {
+		ret = -ENODEV;
+		goto opp_dl_add_err;
+	}
+
 	return 0;
+
+opp_dl_add_err:
+	dev_pm_domain_detach(core->opp_pmdomain, true);
+opp_attach_err:
+	if (core->pd_dl_venus) {
+		device_link_del(core->pd_dl_venus);
+		for (i = 0; i < res->vcodec_pmdomains_num; i++) {
+			if (IS_ERR_OR_NULL(core->pmdomains[i]))
+				continue;
+			dev_pm_domain_detach(core->pmdomains[i], true);
+		}
+	}
+	return ret;
 }
 
 static void vcodec_domains_put(struct device *dev)
@@ -773,7 +810,7 @@ static void vcodec_domains_put(struct device *dev)
 	unsigned int i;
 
 	if (!res->vcodec_pmdomains_num)
-		return;
+		goto skip_pmdomains;
 
 	if (core->pd_dl_venus)
 		device_link_del(core->pd_dl_venus);
@@ -783,6 +820,15 @@ static void vcodec_domains_put(struct device *dev)
 			continue;
 		dev_pm_domain_detach(core->pmdomains[i], true);
 	}
+
+skip_pmdomains:
+	if (!core->has_opp_table)
+		return;
+
+	if (core->opp_dl_venus)
+		device_link_del(core->opp_dl_venus);
+
+	dev_pm_domain_detach(core->opp_pmdomain, true);
 }
 
 static int core_get_v4(struct device *dev)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH 2/3] arm64: dts: sdm845: Add OPP tables and power-domains for venus

[Rajendra Nayak]

Add the OPP tables in order to be able to vote on the performance state of
a power-domain.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 ++++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31..b5bc885 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3206,8 +3206,10 @@
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&videocc VENUS_GDSC>,
 					<&videocc VCODEC0_GDSC>,
-					<&videocc VCODEC1_GDSC>;
-			power-domain-names = "venus", "vcodec0", "vcodec1";
+					<&videocc VCODEC1_GDSC>,
+					<&rpmhpd SDM845_CX>;
+			power-domain-names = "venus", "vcodec0", "vcodec1", "opp-pd";
+			operating-points-v2 = <&venus_opp_table>;
 			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
 				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
 				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -3229,6 +3231,40 @@
 			video-core1 {
 				compatible = "venus-encoder";
 			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
 		};
 
 		videocc: clock-controller@ab00000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 2/3] arm64: dts: sdm845: Add OPP tables and power-domains for venus

[Matthias Kaehlcke]

On Wed, Jul 01, 2020 at 05:10:37PM +0530, Rajendra Nayak wrote:
> Add the OPP tables in order to be able to vote on the performance state of
> a power-domain.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

[PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Rajendra Nayak]

Add the OPP tables in order to be able to vote on the performance state
of a power-domain

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ad57df2..738a741 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2392,8 +2392,10 @@
 			reg = <0 0x0aa00000 0 0xff000>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>;
-			power-domain-names = "venus", "vcodec0";
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd SC7180_CX>;
+			power-domain-names = "venus", "vcodec0", "opp-pd";
+			operating-points-v2 = <&venus_opp_table>;
 			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
 				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
 				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -2414,6 +2416,35 @@
 			video-encoder {
 				compatible = "venus-encoder";
 			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <340000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <434000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
 		};
 
 		videocc: clock-controller@ab00000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Matthias Kaehlcke]

On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
> Add the OPP tables in order to be able to vote on the performance state
> of a power-domain
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
>  1 file changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index ad57df2..738a741 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2392,8 +2392,10 @@
>  			reg = <0 0x0aa00000 0 0xff000>;
>  			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>  			power-domains = <&videocc VENUS_GDSC>,
> -					<&videocc VCODEC0_GDSC>;
> -			power-domain-names = "venus", "vcodec0";
> +					<&videocc VCODEC0_GDSC>,
> +					<&rpmhpd SC7180_CX>;
> +			power-domain-names = "venus", "vcodec0", "opp-pd";
> +			operating-points-v2 = <&venus_opp_table>;
>  			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>  				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>  				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> @@ -2414,6 +2416,35 @@
>  			video-encoder {
>  				compatible = "venus-encoder";
>  			};
> +
> +			venus_opp_table: venus-opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-200000000 {
> +					opp-hz = /bits/ 64 <150000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-320000000 {
> +					opp-hz = /bits/ 64 <270000000>;
> +					required-opps = <&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-380000000 {
> +					opp-hz = /bits/ 64 <340000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +
> +				opp-444000000 {
> +					opp-hz = /bits/ 64 <434000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +
> +				opp-533000000 {
> +					opp-hz = /bits/ 64 <500000000>;
> +					required-opps = <&rpmhpd_opp_turbo>;
> +				};

the labels of the OPP nodes don't match the specified frequencies

Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Rajendra Nayak]

On 7/1/2020 10:24 PM, Matthias Kaehlcke wrote:
> On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
>> Add the OPP tables in order to be able to vote on the performance state
>> of a power-domain
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
>>   1 file changed, 33 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index ad57df2..738a741 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -2392,8 +2392,10 @@
>>   			reg = <0 0x0aa00000 0 0xff000>;
>>   			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>   			power-domains = <&videocc VENUS_GDSC>,
>> -					<&videocc VCODEC0_GDSC>;
>> -			power-domain-names = "venus", "vcodec0";
>> +					<&videocc VCODEC0_GDSC>,
>> +					<&rpmhpd SC7180_CX>;
>> +			power-domain-names = "venus", "vcodec0", "opp-pd";
>> +			operating-points-v2 = <&venus_opp_table>;
>>   			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>>   				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>>   				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
>> @@ -2414,6 +2416,35 @@
>>   			video-encoder {
>>   				compatible = "venus-encoder";
>>   			};
>> +
>> +			venus_opp_table: venus-opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-200000000 {
>> +					opp-hz = /bits/ 64 <150000000>;
>> +					required-opps = <&rpmhpd_opp_low_svs>;
>> +				};
>> +
>> +				opp-320000000 {
>> +					opp-hz = /bits/ 64 <270000000>;
>> +					required-opps = <&rpmhpd_opp_svs>;
>> +				};
>> +
>> +				opp-380000000 {
>> +					opp-hz = /bits/ 64 <340000000>;
>> +					required-opps = <&rpmhpd_opp_svs_l1>;
>> +				};
>> +
>> +				opp-444000000 {
>> +					opp-hz = /bits/ 64 <434000000>;
>> +					required-opps = <&rpmhpd_opp_nom>;
>> +				};
>> +
>> +				opp-533000000 {
>> +					opp-hz = /bits/ 64 <500000000>;
>> +					required-opps = <&rpmhpd_opp_turbo>;
>> +				};
> 
> the labels of the OPP nodes don't match the specified frequencies

Oops, I'll fix and respin.

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Matthias Kaehlcke]

On Thu, Jul 02, 2020 at 02:26:14PM +0530, Rajendra Nayak wrote:
> 
> On 7/1/2020 10:24 PM, Matthias Kaehlcke wrote:
> > On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
> > > Add the OPP tables in order to be able to vote on the performance state
> > > of a power-domain
> > > 
> > > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> > > ---
> > >   arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
> > >   1 file changed, 33 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > index ad57df2..738a741 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > > @@ -2392,8 +2392,10 @@
> > >   			reg = <0 0x0aa00000 0 0xff000>;
> > >   			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > >   			power-domains = <&videocc VENUS_GDSC>,
> > > -					<&videocc VCODEC0_GDSC>;
> > > -			power-domain-names = "venus", "vcodec0";
> > > +					<&videocc VCODEC0_GDSC>,
> > > +					<&rpmhpd SC7180_CX>;
> > > +			power-domain-names = "venus", "vcodec0", "opp-pd";
> > > +			operating-points-v2 = <&venus_opp_table>;
> > >   			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> > >   				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> > >   				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> > > @@ -2414,6 +2416,35 @@
> > >   			video-encoder {
> > >   				compatible = "venus-encoder";
> > >   			};
> > > +
> > > +			venus_opp_table: venus-opp-table {
> > > +				compatible = "operating-points-v2";
> > > +
> > > +				opp-200000000 {
> > > +					opp-hz = /bits/ 64 <150000000>;
> > > +					required-opps = <&rpmhpd_opp_low_svs>;
> > > +				};
> > > +
> > > +				opp-320000000 {
> > > +					opp-hz = /bits/ 64 <270000000>;
> > > +					required-opps = <&rpmhpd_opp_svs>;
> > > +				};
> > > +
> > > +				opp-380000000 {
> > > +					opp-hz = /bits/ 64 <340000000>;
> > > +					required-opps = <&rpmhpd_opp_svs_l1>;
> > > +				};
> > > +
> > > +				opp-444000000 {
> > > +					opp-hz = /bits/ 64 <434000000>;
> > > +					required-opps = <&rpmhpd_opp_nom>;
> > > +				};
> > > +
> > > +				opp-533000000 {
> > > +					opp-hz = /bits/ 64 <500000000>;
> > > +					required-opps = <&rpmhpd_opp_turbo>;
> > > +				};
> > 
> > the labels of the OPP nodes don't match the specified frequencies
> 
> Oops, I'll fix and respin.

ping, it seems the respin is still pending

Re: [PATCH 3/3] arm64: dts: sc7180: Add OPP tables and power-domains for venus

[Rajendra Nayak]

On 7/14/2020 6:06 AM, Matthias Kaehlcke wrote:
> On Thu, Jul 02, 2020 at 02:26:14PM +0530, Rajendra Nayak wrote:
>>
>> On 7/1/2020 10:24 PM, Matthias Kaehlcke wrote:
>>> On Wed, Jul 01, 2020 at 05:10:38PM +0530, Rajendra Nayak wrote:
>>>> Add the OPP tables in order to be able to vote on the performance state
>>>> of a power-domain
>>>>
>>>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>>>> ---
>>>>    arch/arm64/boot/dts/qcom/sc7180.dtsi | 35 +++++++++++++++++++++++++++++++++--
>>>>    1 file changed, 33 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>>>> index ad57df2..738a741 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>>>> @@ -2392,8 +2392,10 @@
>>>>    			reg = <0 0x0aa00000 0 0xff000>;
>>>>    			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>>>    			power-domains = <&videocc VENUS_GDSC>,
>>>> -					<&videocc VCODEC0_GDSC>;
>>>> -			power-domain-names = "venus", "vcodec0";
>>>> +					<&videocc VCODEC0_GDSC>,
>>>> +					<&rpmhpd SC7180_CX>;
>>>> +			power-domain-names = "venus", "vcodec0", "opp-pd";
>>>> +			operating-points-v2 = <&venus_opp_table>;
>>>>    			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>>>>    				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>>>>    				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
>>>> @@ -2414,6 +2416,35 @@
>>>>    			video-encoder {
>>>>    				compatible = "venus-encoder";
>>>>    			};
>>>> +
>>>> +			venus_opp_table: venus-opp-table {
>>>> +				compatible = "operating-points-v2";
>>>> +
>>>> +				opp-200000000 {
>>>> +					opp-hz = /bits/ 64 <150000000>;
>>>> +					required-opps = <&rpmhpd_opp_low_svs>;
>>>> +				};
>>>> +
>>>> +				opp-320000000 {
>>>> +					opp-hz = /bits/ 64 <270000000>;
>>>> +					required-opps = <&rpmhpd_opp_svs>;
>>>> +				};
>>>> +
>>>> +				opp-380000000 {
>>>> +					opp-hz = /bits/ 64 <340000000>;
>>>> +					required-opps = <&rpmhpd_opp_svs_l1>;
>>>> +				};
>>>> +
>>>> +				opp-444000000 {
>>>> +					opp-hz = /bits/ 64 <434000000>;
>>>> +					required-opps = <&rpmhpd_opp_nom>;
>>>> +				};
>>>> +
>>>> +				opp-533000000 {
>>>> +					opp-hz = /bits/ 64 <500000000>;
>>>> +					required-opps = <&rpmhpd_opp_turbo>;
>>>> +				};
>>>
>>> the labels of the OPP nodes don't match the specified frequencies
>>
>> Oops, I'll fix and respin.
> 
> ping, it seems the respin is still pending

I was waiting on Rob to first ack the bindings update patch [1] before I respin
these, however I have not seen a response from Rob on the bindings patch yet,
despite a couple pings. So I'll respin this series anyway.

[1] https://lore.kernel.org/patchwork/patch/1241077/

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation