From: James Hogan <james.hogan@imgtec.com>
To: linux-mips@linux-mips.org
Cc: "James Hogan" <james.hogan@imgtec.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
"Ralf Baechle" <ralf@linux-mips.org>,
kvm@vger.kernel.org
Subject: [PATCH 16/30] KVM: MIPS: Support NetLogic KScratch registers
Date: Fri, 6 Jan 2017 01:32:48 +0000 [thread overview]
Message-ID: <610a667f2bb87443b20a9f9bc1b4bddfc3ae0b09.1483665879.git-series.james.hogan@imgtec.com> (raw)
Message-ID: <20170106013248.aPOMm7vZZCPIC6iigoBYrDXfmYY15O3hVUf2FNwnZrg@z> (raw)
In-Reply-To: <cover.d6d201de414322ed2c1372e164254e6055ef7db9.1483665879.git-series.james.hogan@imgtec.com>
tlbex.c uses the implementation dependent $22 CP0 register group on
NetLogic cores, with the help of the c0_kscratch() helper. Allow these
registers to be allocated by the KVM entry code too instead of assuming
KScratch registers are all $31, which will also allow pgd_reg to be
handled since it is allocated that way.
We also drop the masking of kscratch_mask with 0xfc, as it is redundant
for the standard KScratch registers (Config4.KScrExist won't have the
low 2 bits set anyway), and apparently not necessary for NetLogic.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
---
arch/mips/kvm/entry.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/mips/kvm/entry.c b/arch/mips/kvm/entry.c
index f683d123172c..7424d3d566ff 100644
--- a/arch/mips/kvm/entry.c
+++ b/arch/mips/kvm/entry.c
@@ -91,6 +91,21 @@ static void *kvm_mips_build_ret_from_exit(void *addr);
static void *kvm_mips_build_ret_to_guest(void *addr);
static void *kvm_mips_build_ret_to_host(void *addr);
+/*
+ * The version of this function in tlbex.c uses current_cpu_type(), but for KVM
+ * we assume symmetry.
+ */
+static int c0_kscratch(void)
+{
+ switch (boot_cpu_type()) {
+ case CPU_XLP:
+ case CPU_XLR:
+ return 22;
+ default:
+ return 31;
+ }
+}
+
/**
* kvm_mips_entry_setup() - Perform global setup for entry code.
*
@@ -105,18 +120,18 @@ int kvm_mips_entry_setup(void)
* We prefer to use KScratchN registers if they are available over the
* defaults above, which may not work on all cores.
*/
- unsigned int kscratch_mask = cpu_data[0].kscratch_mask & 0xfc;
+ unsigned int kscratch_mask = cpu_data[0].kscratch_mask;
/* Pick a scratch register for storing VCPU */
if (kscratch_mask) {
- scratch_vcpu[0] = 31;
+ scratch_vcpu[0] = c0_kscratch();
scratch_vcpu[1] = ffs(kscratch_mask) - 1;
kscratch_mask &= ~BIT(scratch_vcpu[1]);
}
/* Pick a scratch register to use as a temp for saving state */
if (kscratch_mask) {
- scratch_tmp[0] = 31;
+ scratch_tmp[0] = c0_kscratch();
scratch_tmp[1] = ffs(kscratch_mask) - 1;
kscratch_mask &= ~BIT(scratch_tmp[1]);
}
@@ -132,7 +147,7 @@ static void kvm_mips_build_save_scratch(u32 **p, unsigned int tmp,
UASM_i_SW(p, tmp, offsetof(struct pt_regs, cp0_epc), frame);
/* Save the temp scratch register value in cp0_cause of stack frame */
- if (scratch_tmp[0] == 31) {
+ if (scratch_tmp[0] == c0_kscratch()) {
UASM_i_MFC0(p, tmp, scratch_tmp[0], scratch_tmp[1]);
UASM_i_SW(p, tmp, offsetof(struct pt_regs, cp0_cause), frame);
}
@@ -148,7 +163,7 @@ static void kvm_mips_build_restore_scratch(u32 **p, unsigned int tmp,
UASM_i_LW(p, tmp, offsetof(struct pt_regs, cp0_epc), frame);
UASM_i_MTC0(p, tmp, scratch_vcpu[0], scratch_vcpu[1]);
- if (scratch_tmp[0] == 31) {
+ if (scratch_tmp[0] == c0_kscratch()) {
UASM_i_LW(p, tmp, offsetof(struct pt_regs, cp0_cause), frame);
UASM_i_MTC0(p, tmp, scratch_tmp[0], scratch_tmp[1]);
}
--
git-series 0.8.10
next prev parent reply other threads:[~2017-01-06 1:33 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-06 1:32 [PATCH 0/30] KVM: MIPS: Implement GVA page tables James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 1/30] mm: Export init_mm for MIPS KVM use of pgd_alloc() James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-17 16:23 ` Ralf Baechle
2017-01-17 16:27 ` Ralf Baechle
2017-01-06 1:32 ` [PATCH 2/30] MIPS: Export pgd/pmd symbols for KVM James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-17 16:24 ` Ralf Baechle
2017-01-06 1:32 ` [PATCH 3/30] MIPS: uasm: Add include guards in asm/uasm.h James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-17 16:25 ` Ralf Baechle
2017-01-06 1:32 ` [PATCH 4/30] MIPS: Export some tlbex internals for KVM to use James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-17 16:26 ` Ralf Baechle
2017-01-06 1:32 ` [PATCH 5/30] KVM: MIPS: Drop partial KVM_NMI implementation James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 6/30] KVM: MIPS/MMU: Simplify ASID restoration James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 7/30] KVM: MIPS: Convert get/set_regs -> vcpu_load/put James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 8/30] KVM: MIPS/MMU: Move preempt/ASID handling to implementation James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 9/30] KVM: MIPS: Remove duplicated ASIDs from vcpu James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 10/30] KVM: MIPS: Add vcpu_run() & vcpu_reenter() callbacks James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 11/30] KVM: MIPS/T&E: Restore host asid on return to host James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 12/30] KVM: MIPS/T&E: active_mm = init_mm in guest context James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 13/30] KVM: MIPS: Wire up vcpu uninit James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 14/30] KVM: MIPS/T&E: Allocate GVA -> HPA page tables James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 15/30] KVM: MIPS/T&E: Activate GVA page tables in guest context James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` James Hogan [this message]
2017-01-06 1:32 ` [PATCH 16/30] KVM: MIPS: Support NetLogic KScratch registers James Hogan
2017-01-06 1:32 ` [PATCH 17/30] KVM: MIPS: Add fast path TLB refill handler James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 18/30] KVM: MIPS/TLB: Fix off-by-one in TLB invalidate James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 19/30] KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 20/30] KVM: MIPS/MMU: Invalidate GVA PTs on ASID changes James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 21/30] KVM: MIPS/MMU: Invalidate stale GVA PTEs on TLBW James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 22/30] KVM: MIPS/MMU: Convert KSeg0 faults to page tables James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 23/30] KVM: MIPS/MMU: Convert TLB mapped " James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 24/30] KVM: MIPS/MMU: Convert commpage fault handling " James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 25/30] KVM: MIPS: Drop vm_init() callback James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 26/30] KVM: MIPS: Use uaccess to read/modify guest instructions James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:32 ` [PATCH 27/30] KVM: MIPS/Emulate: Fix CACHE emulation for EVA hosts James Hogan
2017-01-06 1:32 ` James Hogan
2017-01-06 1:33 ` [PATCH 28/30] KVM: MIPS/TLB: Drop kvm_local_flush_tlb_all() James Hogan
2017-01-06 1:33 ` James Hogan
2017-01-06 1:33 ` [PATCH 29/30] KVM: MIPS/Emulate: Drop redundant TLB flushes on exceptions James Hogan
2017-01-06 1:33 ` James Hogan
2017-01-06 1:33 ` [PATCH 30/30] KVM: MIPS/MMU: Drop kvm_get_new_mmu_context() James Hogan
2017-01-06 1:33 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=610a667f2bb87443b20a9f9bc1b4bddfc3ae0b09.1483665879.git-series.james.hogan@imgtec.com \
--to=james.hogan@imgtec.com \
--cc=kvm@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=pbonzini@redhat.com \
--cc=ralf@linux-mips.org \
--cc=rkrcmar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).