From: Paul Cercueil <paul@crapouillou.net>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Thierry Reding <thierry.reding@gmail.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Maarten ter Huurne <maarten@treewalker.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Paul Burton <paul.burton@imgtec.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org,
james.hogan@imgtec.com, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver
Date: Wed, 18 Jan 2017 00:14:13 +0100 [thread overview]
Message-ID: <20170117231421.16310-6-paul@crapouillou.net> (raw)
In-Reply-To: <20170117231421.16310-1-paul@crapouillou.net>
For a description of the devicetree node, please read
Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/boot/dts/ingenic/jz4740.dtsi | 275 +++++++++++++++++++++++++++++++++
1 file changed, 275 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 3e1587f1f77a..c014a7159a2a 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -55,6 +55,281 @@
clock-names = "rtc";
};
+ pinctrl: ingenic-pinctrl@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio-chips {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpa: gpa {
+ reg = <0x10010000 0x100>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+
+ ingenic,pull-ups = <0xffffffff>;
+ };
+
+ gpb: gpb {
+ reg = <0x10010100 0x100>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+
+ ingenic,pull-ups = <0xffffffff>;
+ };
+
+ gpc: gpc {
+ reg = <0x10010200 0x100>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <26>;
+
+ ingenic,pull-ups = <0xffffffff>;
+ };
+
+ gpd: gpd {
+ reg = <0x10010300 0x100>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+
+ ingenic,pull-ups = <0xdfffffff>;
+ };
+ };
+
+ bias-configs {
+ nobias: pincfg-nobias {
+ bias-disable;
+ };
+
+ pull_up: pincfg-pull-up {
+ bias-pull-up;
+ };
+
+ pull_down: pincfg-pull-down {
+ bias-pull-down;
+ };
+ };
+
+ functions {
+ pinfunc-msc {
+ pins_msc_4bit: pins-msc-4bit {
+ ingenic,pins = <&gpd 8 0 &nobias
+ &gpa 9 0 &nobias
+ &gpa 10 0 &nobias
+ &gpa 11 0 &nobias
+ &gpa 12 0 &nobias
+ &gpa 13 0 &nobias>;
+ };
+ };
+
+ pinfunc-uart0 {
+ pins_uart0_data: pins-uart0-data {
+ ingenic,pins = <&gpd 26 1 &pull_up /* rxd */
+ &gpd 25 1 &nobias>; /* txd */
+ };
+
+ pins_uart0_dataplusflow: uart0-dataplusflow {
+ ingenic,pins = <&gpd 26 1 &pull_up /* rxd */
+ &gpd 25 1 &nobias /* txd */
+ &gpd 31 0 &nobias /* rts */
+ &gpd 30 0 &nobias>; /* cts */
+ };
+ };
+
+ pinfunc-uart1 {
+ pins_uart1_data: uart1-data {
+ ingenic,pins = <&gpd 30 2 &pull_up /* rxd */
+ &gpd 31 2 &nobias>; /* txd */
+ };
+ };
+
+ pinfunc-lcd {
+ pins_lcd_8bit: pins-lcd-8bit {
+ ingenic,pins = <&gpc 0 0 &nobias /* LCD_DATA0 */
+ &gpc 1 0 &nobias
+ &gpc 2 0 &nobias
+ &gpc 3 0 &nobias
+ &gpc 4 0 &nobias
+ &gpc 5 0 &nobias
+ &gpc 6 0 &nobias
+ &gpc 7 0 &nobias /* LCD_DATA7 */
+ &gpc 18 0 &nobias /* PCLK */
+ &gpc 19 0 &nobias /* HSYNC */
+ &gpc 20 0 &nobias>; /* VSYNC */
+ };
+
+ pins_lcd_16bit: pins-lcd-16bit {
+ ingenic,pins = <&gpc 0 0 &nobias /* LCD_DATA0 */
+ &gpc 1 0 &nobias
+ &gpc 2 0 &nobias
+ &gpc 3 0 &nobias
+ &gpc 4 0 &nobias
+ &gpc 5 0 &nobias
+ &gpc 6 0 &nobias
+ &gpc 7 0 &nobias
+ &gpc 8 0 &nobias
+ &gpc 9 0 &nobias
+ &gpc 10 0 &nobias
+ &gpc 11 0 &nobias
+ &gpc 12 0 &nobias
+ &gpc 13 0 &nobias
+ &gpc 14 0 &nobias
+ &gpc 15 0 &nobias /* LCD_DATA15 */
+ &gpc 18 0 &nobias /* PCLK */
+ &gpc 19 0 &nobias /* HSYNC */
+ &gpc 20 0 &nobias /* VSYNC */
+ &gpc 21 0 &nobias>; /* DE */
+ };
+
+ pins_lcd_18bit: pins-lcd-18bit {
+ ingenic,pins = <&gpc 0 0 &nobias /* LCD_DATA0 */
+ &gpc 1 0 &nobias
+ &gpc 2 0 &nobias
+ &gpc 3 0 &nobias
+ &gpc 4 0 &nobias
+ &gpc 5 0 &nobias
+ &gpc 6 0 &nobias
+ &gpc 7 0 &nobias
+ &gpc 8 0 &nobias
+ &gpc 9 0 &nobias
+ &gpc 10 0 &nobias
+ &gpc 11 0 &nobias
+ &gpc 12 0 &nobias
+ &gpc 13 0 &nobias
+ &gpc 14 0 &nobias
+ &gpc 15 0 &nobias
+ &gpc 16 0 &nobias
+ &gpc 17 0 &nobias /* LCD_DATA17 */
+ &gpc 18 0 &nobias /* PCLK */
+ &gpc 19 0 &nobias /* HSYNC */
+ &gpc 20 0 &nobias /* VSYNC */
+ &gpc 21 0 &nobias>; /* DE */
+ };
+
+ pins_lcd_special_tft: pins-lcd-special-tft {
+ ingenic,pins = <&gpc 0 0 &nobias /* LCD_DATA0 */
+ &gpc 1 0 &nobias
+ &gpc 2 0 &nobias
+ &gpc 3 0 &nobias
+ &gpc 4 0 &nobias
+ &gpc 5 0 &nobias
+ &gpc 6 0 &nobias
+ &gpc 7 0 &nobias
+ &gpc 8 0 &nobias
+ &gpc 9 0 &nobias
+ &gpc 10 0 &nobias
+ &gpc 11 0 &nobias
+ &gpc 12 0 &nobias
+ &gpc 13 0 &nobias
+ &gpc 14 0 &nobias
+ &gpc 15 0 &nobias
+ &gpc 16 0 &nobias
+ &gpc 17 0 &nobias /* LCD_DATA17 */
+ &gpc 18 0 &nobias /* PCLK */
+ &gpc 19 0 &nobias /* HSYNC */
+ &gpc 20 0 &nobias /* VSYNC */
+ &gpc 21 0 &nobias /* DE */
+ &gpc 22 0 &nobias /* PS */
+ &gpc 23 0 &nobias /* REV */
+ &gpb 17 0 &nobias /* CLS */
+ &gpb 18 0 &nobias>; /* SPL */
+ };
+
+ pinfunc_lcd_nopins: pins-lcd-no-pins {
+ ingenic,pins = <>;
+ };
+ };
+
+ pinfunc-nand {
+ pins_nand: pins-nand {
+ ingenic,pins = <&gpb 25 0 &nobias
+ &gpb 26 0 &nobias
+ &gpb 27 0 &nobias
+ &gpb 28 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm0 {
+ pins_pwm0: pins-pwm0 {
+ ingenic,pins = <&gpd 23 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm1 {
+ pins_pwm1: pins-pwm1 {
+ ingenic,pins = <&gpd 24 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm2 {
+ pins_pwm2: pins-pwm2 {
+ ingenic,pins = <&gpd 25 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm3 {
+ pins_pwm3: pins-pwm3 {
+ ingenic,pins = <&gpd 26 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm4 {
+ pins_pwm4: pins-pwm4 {
+ ingenic,pins = <&gpd 27 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm5 {
+ pins_pwm5: pins-pwm5 {
+ ingenic,pins = <&gpd 28 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm6 {
+ pins_pwm6: pins-pwm6 {
+ ingenic,pins = <&gpd 30 0 &nobias>;
+ };
+ };
+
+ pinfunc-pwm7 {
+ pins_pwm7: pins-pwm7 {
+ ingenic,pins = <&gpd 31 0 &nobias>;
+ };
+ };
+ };
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4740-uart";
reg = <0x10030000 0x100>;
--
2.11.0
next prev parent reply other threads:[~2017-01-17 23:19 UTC|newest]
Thread overview: 162+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 23:14 [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-01-17 23:14 ` [PATCH 01/13] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-18 23:45 ` Linus Walleij
2017-01-17 23:14 ` [PATCH 02/13] pinctrl-jz4740: add a pinctrl driver for the Ingenic jz4740 SoC Paul Cercueil
2017-01-18 10:16 ` Linus Walleij
2017-01-17 23:14 ` [PATCH 03/13] pinctrl-jz4780: add a pinctrl driver for the Ingenic jz4780 SoC Paul Cercueil
2017-01-17 23:14 ` [PATCH 04/13] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-17 23:14 ` Paul Cercueil [this message]
2017-01-18 23:50 ` [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver Linus Walleij
2017-01-17 23:14 ` [PATCH 06/13] MIPS: jz4780: DTS: Add node for the jz4780-pinctrl driver Paul Cercueil
2017-01-17 23:14 ` [PATCH 07/13] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-17 23:14 ` [PATCH 08/13] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-17 23:14 ` [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-19 10:55 ` Ulf Hansson
2017-01-20 11:59 ` Paul Cercueil
2017-01-17 23:14 ` [PATCH 10/13] mtd: nand: " Paul Cercueil
2017-01-27 17:33 ` Boris Brezillon
2017-01-17 23:14 ` [PATCH 11/13] fbdev: jz4740-fb: " Paul Cercueil
2017-01-17 23:14 ` [PATCH 12/13] pwm: jz4740: " Paul Cercueil
2017-01-18 7:20 ` Thierry Reding
2017-01-17 23:14 ` [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-18 7:27 ` Thierry Reding
2017-01-19 11:24 ` Paul Cercueil
2017-01-19 9:07 ` Linus Walleij
2017-01-20 10:01 ` Paul Cercueil
2017-01-18 7:15 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Thierry Reding
2017-01-19 11:19 ` Paul Cercueil
2017-01-20 8:40 ` Linus Walleij
2017-01-20 10:17 ` Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 00/14] " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-27 11:18 ` Linus Walleij
2017-01-27 15:27 ` Paul Cercueil
2017-01-31 12:59 ` Linus Walleij
2017-01-22 14:49 ` [PATCH v2 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-01-22 16:21 ` kbuild test robot
2017-01-22 16:21 ` kbuild test robot
2017-01-22 17:49 ` kbuild test robot
2017-01-22 17:49 ` kbuild test robot
2017-01-22 17:49 ` [PATCH] GPIO: fix semicolon.cocci warnings kbuild test robot
2017-01-22 17:49 ` kbuild test robot
2017-01-22 14:49 ` [PATCH v2 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 07/14] MIPS: jz4780: " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-23 10:40 ` Ulf Hansson
2017-01-22 14:49 ` [PATCH v2 11/14] mtd: nand: " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 13/14] pwm: jz4740: " Paul Cercueil
2017-01-22 14:49 ` [PATCH v2 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-25 18:51 ` [PATCH v3 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-01-25 18:51 ` [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-30 20:36 ` Rob Herring
2017-01-30 20:36 ` Rob Herring
2017-01-31 10:31 ` Paul Cercueil
2017-01-31 13:09 ` Linus Walleij
2017-02-09 17:28 ` Paul Cercueil
2017-02-20 13:56 ` Linus Walleij
2017-02-21 11:20 ` Paul Cercueil
2017-02-23 9:59 ` Linus Walleij
2017-04-02 20:42 ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-04-04 14:48 ` Rob Herring
2017-04-28 20:08 ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 " Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-05-12 16:52 ` [PATCH v6 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 07/14] MIPS: jz4780: " Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 11/14] mtd: nand: " Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 13/14] pwm: jz4740: " Paul Cercueil
2017-05-12 16:53 ` [PATCH v6 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-05-05 19:57 ` Rob Herring
2017-04-28 20:08 ` [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-05-03 9:12 ` Paul Cercueil
2017-05-11 11:01 ` Linus Walleij
2017-04-28 20:08 ` [PATCH v5 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-05-07 22:05 ` Paul Cercueil
2017-05-11 11:06 ` Linus Walleij
2017-04-28 20:08 ` [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-05-11 11:08 ` Linus Walleij
2017-05-12 17:00 ` Paul Cercueil
2017-05-22 15:31 ` Linus Walleij
2017-07-02 16:35 ` Paul Cercueil
2017-07-03 9:07 ` Linus Walleij
2017-07-03 13:55 ` Ralf Baechle
2017-07-31 13:29 ` Linus Walleij
2017-04-28 20:08 ` [PATCH v5 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 07/14] MIPS: jz4780: " Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 11/14] mtd: nand: " Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 13/14] pwm: jz4740: " Paul Cercueil
2017-04-28 20:08 ` [PATCH v5 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-04-04 14:52 ` Rob Herring
2017-04-02 20:42 ` [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-04-07 9:41 ` Linus Walleij
2017-04-07 10:56 ` Lee Jones
2017-04-02 20:42 ` [PATCH v4 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-04-03 14:15 ` kbuild test robot
2017-04-03 14:15 ` kbuild test robot
2017-04-07 9:34 ` Linus Walleij
2017-04-02 20:42 ` [PATCH v4 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-04-03 9:57 ` Sergei Shtylyov
2017-04-03 10:20 ` Paul Cercueil
2017-04-03 10:32 ` Sergei Shtylyov
2017-04-07 9:44 ` Linus Walleij
2017-04-07 13:57 ` Paul Cercueil
2017-04-24 12:58 ` Linus Walleij
2017-04-02 20:42 ` [PATCH v4 07/14] MIPS: jz4780: " Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 11/14] mtd: nand: " Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-04-02 20:42 ` [PATCH v4 13/14] pwm: jz4740: " Paul Cercueil
2017-04-06 14:40 ` Thierry Reding
2017-04-02 20:42 ` [PATCH v4 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-25 18:51 ` [PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil
2017-01-30 20:33 ` Rob Herring
2017-01-25 18:51 ` [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-01-31 14:05 ` Linus Walleij
2017-01-31 14:12 ` Paul Cercueil
2017-01-25 18:51 ` [PATCH v3 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-01-31 14:13 ` Linus Walleij
2017-02-09 17:14 ` Paul Cercueil
2017-02-12 20:48 ` Linus Walleij
2017-01-31 14:20 ` Linus Walleij
2017-01-31 15:29 ` Paul Cercueil
2017-02-03 13:58 ` Linus Walleij
2017-01-25 18:51 ` [PATCH v3 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-25 18:51 ` [PATCH v3 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-01-31 14:16 ` Linus Walleij
2017-01-25 18:52 ` [PATCH v3 07/14] MIPS: jz4780: " Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-26 6:11 ` kbuild test robot
2017-01-26 6:11 ` kbuild test robot
2017-01-26 10:10 ` Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 11/14] mtd: nand: " Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-01-30 16:10 ` Bartlomiej Zolnierkiewicz
2017-01-25 18:52 ` [PATCH v3 13/14] pwm: jz4740: " Paul Cercueil
2017-01-25 18:52 ` [PATCH v3 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-19 6:38 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170117231421.16310-6-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=b.zolnierkie@samsung.com \
--cc=boris.brezillon@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=james.hogan@imgtec.com \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=maarten@treewalker.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@imgtec.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).