linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Maarten ter Huurne <maarten@treewalker.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Paul Burton <paul.burton@imgtec.com>,
	james.hogan@imgtec.com, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mips@linux-mips.org, linux-mmc@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org,
	linux-fbdev@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs
Date: Sun,  2 Apr 2017 22:42:33 +0200	[thread overview]
Message-ID: <20170402204244.14216-4-paul@crapouillou.net> (raw)
In-Reply-To: <20170402204244.14216-1-paul@crapouillou.net>

This driver handles pin configuration and pin muxing for the
JZ4740 and JZ4780 SoCs from Ingenic.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/pinctrl/Kconfig           |  10 +
 drivers/pinctrl/Makefile          |   1 +
 drivers/pinctrl/pinctrl-ingenic.c | 884 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 895 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-ingenic.c

 v2: Consider it's a new patch. Completely rewritten from v1.
 v3: 'unsigned' -> 'unsigned int'
 v4: Completely rewritten from v3.

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f8c2af45781..82ce72fcb8e0 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -285,6 +285,16 @@ config PINCTRL_ZYNQ
 	help
 	  This selects the pinctrl driver for Xilinx Zynq.
 
+config PINCTRL_INGENIC
+	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
+	default y
+	depends on MACH_INGENIC || COMPILE_TEST
+	select GENERIC_PINCONF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select REGMAP_MMIO
+	select MFD_CORE
+
 source "drivers/pinctrl/aspeed/Kconfig"
 source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index a251f439626f..80f327239d4b 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
+obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o
 
 obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
 obj-y				+= bcm/
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
new file mode 100644
index 000000000000..3eeee46d7432
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -0,0 +1,884 @@
+/*
+ * Ingenic SoCs pinctrl driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/compiler.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinmux.h"
+
+#define JZ4740_GPIO_DATA	0x10
+#define JZ4740_GPIO_PULL_DIS	0x30
+#define JZ4740_GPIO_FUNC	0x40
+#define JZ4740_GPIO_SELECT	0x50
+#define JZ4740_GPIO_DIR		0x60
+#define JZ4740_GPIO_TRIG	0x70
+#define JZ4740_GPIO_FLAG	0x80
+
+#define JZ4770_GPIO_INT		0x10
+#define JZ4770_GPIO_MSK		0x20
+#define JZ4770_GPIO_PAT1	0x30
+#define JZ4770_GPIO_PAT0	0x40
+#define JZ4770_GPIO_FLAG	0x50
+#define JZ4770_GPIO_PEN		0x70
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+#define PINS_PER_GPIO_CHIP 32
+
+enum jz_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_chip_info {
+	unsigned int num_chips;
+
+	const struct group_desc *groups;
+	unsigned int num_groups;
+
+	const struct function_desc *functions;
+	unsigned int num_functions;
+
+	const u32 *pull_ups, *pull_downs;
+};
+
+struct ingenic_pinctrl {
+	struct device *dev;
+	struct regmap *map;
+	struct pinctrl_dev *pctl;
+	struct pinctrl_pin_desc *pdesc;
+	enum jz_version version;
+
+	const struct ingenic_chip_info *info;
+};
+
+static const u32 jz4740_pull_ups[4] = {
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+};
+
+static const u32 jz4740_pull_downs[4] = {
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+};
+
+static int jz4740_mmc_1bit_pins[] = { 0x69, 0x68, 0x6a, };
+static int jz4740_mmc_4bit_pins[] = { 0x6b, 0x6c, 0x6d, };
+static int jz4740_uart0_data_pins[] = { 0x7a, 0x79, };
+static int jz4740_uart0_hwflow_pins[] = { 0x7e, 0x7f, };
+static int jz4740_uart1_data_pins[] = { 0x7e, 0x7f, };
+static int jz4740_lcd_8bit_pins[] = {
+	0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x52, 0x53, 0x54,
+};
+static int jz4740_lcd_16bit_pins[] = {
+	0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x55,
+};
+static int jz4740_lcd_18bit_pins[] = { 0x50, 0x51, };
+static int jz4740_lcd_18bit_tft_pins[] = { 0x56, 0x57, 0x31, 0x32, };
+static int jz4740_nand_cs1_pins[] = { 0x39, };
+static int jz4740_nand_cs2_pins[] = { 0x3a, };
+static int jz4740_nand_cs3_pins[] = { 0x3b, };
+static int jz4740_nand_cs4_pins[] = { 0x3c, };
+static int jz4740_pwm_pwm0_pins[] = { 0x77, };
+static int jz4740_pwm_pwm1_pins[] = { 0x78, };
+static int jz4740_pwm_pwm2_pins[] = { 0x79, };
+static int jz4740_pwm_pwm3_pins[] = { 0x7a, };
+static int jz4740_pwm_pwm4_pins[] = { 0x7b, };
+static int jz4740_pwm_pwm5_pins[] = { 0x7c, };
+static int jz4740_pwm_pwm6_pins[] = { 0x7e, };
+static int jz4740_pwm_pwm7_pins[] = { 0x7f, };
+
+static int jz4740_mmc_1bit_funcs[] = { 0, 0, 0, };
+static int jz4740_mmc_4bit_funcs[] = { 0, 0, 0, };
+static int jz4740_uart0_data_funcs[] = { 1, 1, };
+static int jz4740_uart0_hwflow_funcs[] = { 1, 1, };
+static int jz4740_uart1_data_funcs[] = { 2, 2, };
+static int jz4740_lcd_8bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4740_lcd_16bit_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4740_lcd_18bit_funcs[] = { 0, 0, };
+static int jz4740_lcd_18bit_tft_funcs[] = { 0, 0, 0, 0, };
+static int jz4740_nand_cs1_funcs[] = { 0, };
+static int jz4740_nand_cs2_funcs[] = { 0, };
+static int jz4740_nand_cs3_funcs[] = { 0, };
+static int jz4740_nand_cs4_funcs[] = { 0, };
+static int jz4740_pwm_pwm0_funcs[] = { 0, };
+static int jz4740_pwm_pwm1_funcs[] = { 0, };
+static int jz4740_pwm_pwm2_funcs[] = { 0, };
+static int jz4740_pwm_pwm3_funcs[] = { 0, };
+static int jz4740_pwm_pwm4_funcs[] = { 0, };
+static int jz4740_pwm_pwm5_funcs[] = { 0, };
+static int jz4740_pwm_pwm6_funcs[] = { 0, };
+static int jz4740_pwm_pwm7_funcs[] = { 0, };
+
+#define INGENIC_PIN_GROUP(name, id)			\
+	{						\
+		name,					\
+		id##_pins,				\
+		ARRAY_SIZE(id##_pins),			\
+		id##_funcs,				\
+	}
+
+static const struct group_desc jz4740_groups[] = {
+	INGENIC_PIN_GROUP("mmc-1bit", jz4740_mmc_1bit),
+	INGENIC_PIN_GROUP("mmc-4bit", jz4740_mmc_4bit),
+	INGENIC_PIN_GROUP("uart0-data", jz4740_uart0_data),
+	INGENIC_PIN_GROUP("uart0-hwflow", jz4740_uart0_hwflow),
+	INGENIC_PIN_GROUP("uart1-data", jz4740_uart1_data),
+	INGENIC_PIN_GROUP("lcd-8bit", jz4740_lcd_8bit),
+	INGENIC_PIN_GROUP("lcd-16bit", jz4740_lcd_16bit),
+	INGENIC_PIN_GROUP("lcd-18bit", jz4740_lcd_18bit),
+	INGENIC_PIN_GROUP("lcd-18bit-tft", jz4740_lcd_18bit_tft),
+	{ "lcd-no-pins", },
+	INGENIC_PIN_GROUP("nand-cs1", jz4740_nand_cs1),
+	INGENIC_PIN_GROUP("nand-cs2", jz4740_nand_cs2),
+	INGENIC_PIN_GROUP("nand-cs3", jz4740_nand_cs3),
+	INGENIC_PIN_GROUP("nand-cs4", jz4740_nand_cs4),
+	INGENIC_PIN_GROUP("pwm0", jz4740_pwm_pwm0),
+	INGENIC_PIN_GROUP("pwm1", jz4740_pwm_pwm1),
+	INGENIC_PIN_GROUP("pwm2", jz4740_pwm_pwm2),
+	INGENIC_PIN_GROUP("pwm3", jz4740_pwm_pwm3),
+	INGENIC_PIN_GROUP("pwm4", jz4740_pwm_pwm4),
+	INGENIC_PIN_GROUP("pwm5", jz4740_pwm_pwm5),
+	INGENIC_PIN_GROUP("pwm6", jz4740_pwm_pwm6),
+	INGENIC_PIN_GROUP("pwm7", jz4740_pwm_pwm7),
+};
+
+static const char *jz4740_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
+static const char *jz4740_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *jz4740_uart1_groups[] = { "uart1-data", };
+static const char *jz4740_lcd_groups[] = {
+	"lcd-8bit", "lcd-16bit", "lcd-18bit", "lcd-18bit-tft", "lcd-no-pins",
+};
+static const char *jz4740_nand_groups[] = {
+	"nand-cs1", "nand-cs2", "nand-cs3", "nand-cs4",
+};
+static const char *jz4740_pwm0_groups[] = { "pwm0", };
+static const char *jz4740_pwm1_groups[] = { "pwm1", };
+static const char *jz4740_pwm2_groups[] = { "pwm2", };
+static const char *jz4740_pwm3_groups[] = { "pwm3", };
+static const char *jz4740_pwm4_groups[] = { "pwm4", };
+static const char *jz4740_pwm5_groups[] = { "pwm5", };
+static const char *jz4740_pwm6_groups[] = { "pwm6", };
+static const char *jz4740_pwm7_groups[] = { "pwm7", };
+
+static const struct function_desc jz4740_functions[] = {
+	{ "mmc", jz4740_mmc_groups, ARRAY_SIZE(jz4740_mmc_groups), },
+	{ "uart0", jz4740_uart0_groups, ARRAY_SIZE(jz4740_uart0_groups), },
+	{ "uart1", jz4740_uart1_groups, ARRAY_SIZE(jz4740_uart1_groups), },
+	{ "lcd", jz4740_lcd_groups, ARRAY_SIZE(jz4740_lcd_groups), },
+	{ "nand", jz4740_nand_groups, ARRAY_SIZE(jz4740_nand_groups), },
+	{ "pwm0", jz4740_pwm0_groups, ARRAY_SIZE(jz4740_pwm0_groups), },
+	{ "pwm1", jz4740_pwm1_groups, ARRAY_SIZE(jz4740_pwm1_groups), },
+	{ "pwm2", jz4740_pwm2_groups, ARRAY_SIZE(jz4740_pwm2_groups), },
+	{ "pwm3", jz4740_pwm3_groups, ARRAY_SIZE(jz4740_pwm3_groups), },
+	{ "pwm4", jz4740_pwm4_groups, ARRAY_SIZE(jz4740_pwm4_groups), },
+	{ "pwm5", jz4740_pwm5_groups, ARRAY_SIZE(jz4740_pwm5_groups), },
+	{ "pwm6", jz4740_pwm6_groups, ARRAY_SIZE(jz4740_pwm6_groups), },
+	{ "pwm7", jz4740_pwm7_groups, ARRAY_SIZE(jz4740_pwm7_groups), },
+};
+
+static const struct ingenic_chip_info jz4740_chip_info = {
+	.num_chips = 4,
+	.groups = jz4740_groups,
+	.num_groups = ARRAY_SIZE(jz4740_groups),
+	.functions = jz4740_functions,
+	.num_functions = ARRAY_SIZE(jz4740_functions),
+	.pull_ups = jz4740_pull_ups,
+	.pull_downs = jz4740_pull_downs,
+};
+
+static const u32 jz4770_pull_ups[6] = {
+	0x3fffffff, 0xfff0030c, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0xffa7f00f,
+};
+
+static const u32 jz4770_pull_downs[6] = {
+	0x00000000, 0x000f0c03, 0x00000000, 0x0000b000, 0x00000483, 0x00580ff0,
+};
+
+static int jz4770_uart0_data_pins[] = { 0xa0, 0xa3, };
+static int jz4770_uart0_hwflow_pins[] = { 0xa1, 0xa2, };
+static int jz4770_uart1_data_pins[] = { 0x7a, 0x7c, };
+static int jz4770_uart1_hwflow_pins[] = { 0x7b, 0x7d, };
+static int jz4770_uart2_data_pins[] = { 0x66, 0x67, };
+static int jz4770_uart2_hwflow_pins[] = { 0x65, 0x64, };
+static int jz4770_uart3_data_pins[] = { 0x6c, 0x85, };
+static int jz4770_uart3_hwflow_pins[] = { 0x88, 0x89, };
+static int jz4770_uart4_data_pins[] = { 0x54, 0x4a, };
+static int jz4770_mmc0_8bit_a_pins[] = { 0x04, 0x05, 0x06, 0x07, 0x18, };
+static int jz4770_mmc0_4bit_a_pins[] = { 0x15, 0x16, 0x17, };
+static int jz4770_mmc0_1bit_a_pins[] = { 0x12, 0x13, 0x14, };
+static int jz4770_mmc0_4bit_e_pins[] = { 0x95, 0x96, 0x97, };
+static int jz4770_mmc0_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, };
+static int jz4770_mmc1_4bit_d_pins[] = { 0x75, 0x76, 0x77, };
+static int jz4770_mmc1_1bit_d_pins[] = { 0x78, 0x79, 0x74, };
+static int jz4770_mmc1_4bit_e_pins[] = { 0x95, 0x96, 0x97, };
+static int jz4770_mmc1_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, };
+static int jz4770_nemc_data_pins[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+};
+static int jz4770_nemc_cle_ale_pins[] = { 0x20, 0x21, };
+static int jz4770_nemc_addr_pins[] = { 0x22, 0x23, 0x24, 0x25, };
+static int jz4770_nemc_rd_we_pins[] = { 0x10, 0x11, };
+static int jz4770_nemc_frd_fwe_pins[] = { 0x12, 0x13, };
+static int jz4770_nemc_cs1_pins[] = { 0x15, };
+static int jz4770_nemc_cs2_pins[] = { 0x16, };
+static int jz4770_nemc_cs3_pins[] = { 0x17, };
+static int jz4770_nemc_cs4_pins[] = { 0x18, };
+static int jz4770_nemc_cs5_pins[] = { 0x19, };
+static int jz4770_nemc_cs6_pins[] = { 0x1a, };
+static int jz4770_i2c0_pins[] = { 0x6e, 0x6f, };
+static int jz4770_i2c1_pins[] = { 0x8e, 0x8f, };
+static int jz4770_i2c2_pins[] = { 0xb0, 0xb1, };
+static int jz4770_i2c3_pins[] = { 0x6a, 0x6b, };
+static int jz4770_i2c4_e_pins[] = { 0x8c, 0x8d, };
+static int jz4770_i2c4_f_pins[] = { 0xb9, 0xb8, };
+static int jz4770_cim_pins[] = {
+	0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31,
+};
+static int jz4770_lcd_32bit_pins[] = {
+	0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+	0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+	0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+	0x58, 0x59, 0x51,
+};
+static int jz4770_pwm_pwm0_pins[] = { 0x80, };
+static int jz4770_pwm_pwm1_pins[] = { 0x81, };
+static int jz4770_pwm_pwm2_pins[] = { 0x82, };
+static int jz4770_pwm_pwm3_pins[] = { 0x83, };
+static int jz4770_pwm_pwm4_pins[] = { 0x84, };
+static int jz4770_pwm_pwm5_pins[] = { 0x85, };
+static int jz4770_pwm_pwm6_pins[] = { 0x6a, };
+static int jz4770_pwm_pwm7_pins[] = { 0x6b, };
+
+static int jz4770_uart0_data_funcs[] = { 0, 0, };
+static int jz4770_uart0_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart1_data_funcs[] = { 0, 0, };
+static int jz4770_uart1_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart2_data_funcs[] = { 1, 1, };
+static int jz4770_uart2_hwflow_funcs[] = { 1, 1, };
+static int jz4770_uart3_data_funcs[] = { 0, 1, };
+static int jz4770_uart3_hwflow_funcs[] = { 0, 0, };
+static int jz4770_uart4_data_funcs[] = { 2, 2, };
+static int jz4770_mmc0_8bit_a_funcs[] = { 1, 1, 1, 1, 1, };
+static int jz4770_mmc0_4bit_a_funcs[] = { 1, 1, 1, };
+static int jz4770_mmc0_1bit_a_funcs[] = { 1, 1, 0, };
+static int jz4770_mmc0_4bit_e_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc0_1bit_e_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_4bit_d_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_1bit_d_funcs[] = { 0, 0, 0, };
+static int jz4770_mmc1_4bit_e_funcs[] = { 1, 1, 1, };
+static int jz4770_mmc1_1bit_e_funcs[] = { 1, 1, 1, };
+static int jz4770_nemc_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4770_nemc_cle_ale_funcs[] = { 0, 0, };
+static int jz4770_nemc_addr_funcs[] = { 0, 0, 0, 0, };
+static int jz4770_nemc_rd_we_funcs[] = { 0, 0, };
+static int jz4770_nemc_frd_fwe_funcs[] = { 0, 0, };
+static int jz4770_nemc_cs1_funcs[] = { 0, };
+static int jz4770_nemc_cs2_funcs[] = { 0, };
+static int jz4770_nemc_cs3_funcs[] = { 0, };
+static int jz4770_nemc_cs4_funcs[] = { 0, };
+static int jz4770_nemc_cs5_funcs[] = { 0, };
+static int jz4770_nemc_cs6_funcs[] = { 0, };
+static int jz4770_i2c0_funcs[] = { 0, 0, };
+static int jz4770_i2c1_funcs[] = { 0, 0, };
+static int jz4770_i2c2_funcs[] = { 2, 2, };
+static int jz4770_i2c3_funcs[] = { 1, 1, };
+static int jz4770_i2c4_e_funcs[] = { 1, 1, };
+static int jz4770_i2c4_f_funcs[] = { 1, 1, };
+static int jz4770_cim_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+static int jz4770_lcd_32bit_funcs[] = {
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0,
+};
+static int jz4770_pwm_pwm0_funcs[] = { 0, };
+static int jz4770_pwm_pwm1_funcs[] = { 0, };
+static int jz4770_pwm_pwm2_funcs[] = { 0, };
+static int jz4770_pwm_pwm3_funcs[] = { 0, };
+static int jz4770_pwm_pwm4_funcs[] = { 0, };
+static int jz4770_pwm_pwm5_funcs[] = { 0, };
+static int jz4770_pwm_pwm6_funcs[] = { 0, };
+static int jz4770_pwm_pwm7_funcs[] = { 0, };
+
+static const struct group_desc jz4770_groups[] = {
+	INGENIC_PIN_GROUP("uart0-data", jz4770_uart0_data),
+	INGENIC_PIN_GROUP("uart0-hwflow", jz4770_uart0_hwflow),
+	INGENIC_PIN_GROUP("uart1-data", jz4770_uart1_data),
+	INGENIC_PIN_GROUP("uart1-hwflow", jz4770_uart1_hwflow),
+	INGENIC_PIN_GROUP("uart2-data", jz4770_uart2_data),
+	INGENIC_PIN_GROUP("uart2-hwflow", jz4770_uart2_hwflow),
+	INGENIC_PIN_GROUP("uart3-data", jz4770_uart3_data),
+	INGENIC_PIN_GROUP("uart3-hwflow", jz4770_uart3_hwflow),
+	INGENIC_PIN_GROUP("uart4-data", jz4770_uart4_data),
+	INGENIC_PIN_GROUP("mmc0-8bit-a", jz4770_mmc0_8bit_a),
+	INGENIC_PIN_GROUP("mmc0-4bit-a", jz4770_mmc0_4bit_a),
+	INGENIC_PIN_GROUP("mmc0-1bit-a", jz4770_mmc0_1bit_a),
+	INGENIC_PIN_GROUP("mmc0-4bit-e", jz4770_mmc0_4bit_e),
+	INGENIC_PIN_GROUP("mmc0-1bit-e", jz4770_mmc0_1bit_e),
+	INGENIC_PIN_GROUP("mmc1-4bit-d", jz4770_mmc1_4bit_d),
+	INGENIC_PIN_GROUP("mmc1-1bit-d", jz4770_mmc1_1bit_d),
+	INGENIC_PIN_GROUP("mmc1-4bit-e", jz4770_mmc1_4bit_e),
+	INGENIC_PIN_GROUP("mmc1-1bit-e", jz4770_mmc1_1bit_e),
+	INGENIC_PIN_GROUP("nemc-data", jz4770_nemc_data),
+	INGENIC_PIN_GROUP("nemc-cle-ale", jz4770_nemc_cle_ale),
+	INGENIC_PIN_GROUP("nemc-addr", jz4770_nemc_addr),
+	INGENIC_PIN_GROUP("nemc-rd-we", jz4770_nemc_rd_we),
+	INGENIC_PIN_GROUP("nemc-frd-fwe", jz4770_nemc_frd_fwe),
+	INGENIC_PIN_GROUP("nemc-cs1", jz4770_nemc_cs1),
+	INGENIC_PIN_GROUP("nemc-cs2", jz4770_nemc_cs2),
+	INGENIC_PIN_GROUP("nemc-cs3", jz4770_nemc_cs3),
+	INGENIC_PIN_GROUP("nemc-cs4", jz4770_nemc_cs4),
+	INGENIC_PIN_GROUP("nemc-cs5", jz4770_nemc_cs5),
+	INGENIC_PIN_GROUP("nemc-cs6", jz4770_nemc_cs6),
+	INGENIC_PIN_GROUP("i2c0-data", jz4770_i2c0),
+	INGENIC_PIN_GROUP("i2c1-data", jz4770_i2c1),
+	INGENIC_PIN_GROUP("i2c2-data", jz4770_i2c2),
+	INGENIC_PIN_GROUP("i2c3-data", jz4770_i2c3),
+	INGENIC_PIN_GROUP("i2c4-data-e", jz4770_i2c4_e),
+	INGENIC_PIN_GROUP("i2c4-data-f", jz4770_i2c4_f),
+	INGENIC_PIN_GROUP("cim-data", jz4770_cim),
+	INGENIC_PIN_GROUP("lcd-32bit", jz4770_lcd_32bit),
+	{ "lcd-no-pins", },
+	INGENIC_PIN_GROUP("pwm0", jz4770_pwm_pwm0),
+	INGENIC_PIN_GROUP("pwm1", jz4770_pwm_pwm1),
+	INGENIC_PIN_GROUP("pwm2", jz4770_pwm_pwm2),
+	INGENIC_PIN_GROUP("pwm3", jz4770_pwm_pwm3),
+	INGENIC_PIN_GROUP("pwm4", jz4770_pwm_pwm4),
+	INGENIC_PIN_GROUP("pwm5", jz4770_pwm_pwm5),
+	INGENIC_PIN_GROUP("pwm6", jz4770_pwm_pwm6),
+	INGENIC_PIN_GROUP("pwm7", jz4770_pwm_pwm7),
+};
+
+static const char *jz4770_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *jz4770_uart1_groups[] = { "uart1-data", "uart1-hwflow", };
+static const char *jz4770_uart2_groups[] = { "uart2-data", "uart2-hwflow", };
+static const char *jz4770_uart3_groups[] = { "uart3-data", "uart3-hwflow", };
+static const char *jz4770_uart4_groups[] = { "uart4-data", };
+static const char *jz4770_mmc0_groups[] = {
+	"mmc0-8bit-a", "mmc0-4bit-a", "mmc0-1bit-a",
+	"mmc0-1bit-e", "mmc0-4bit-e",
+};
+static const char *jz4770_mmc1_groups[] = {
+	"mmc1-1bit-d", "mmc1-4bit-d", "mmc1-1bit-e", "mmc1-4bit-e",
+};
+static const char *jz4770_nemc_groups[] = {
+	"nemc-data", "nemc-cle-ale", "nemc-addr", "nemc-rd-we", "nemc-frd-fwe",
+};
+static const char *jz4770_cs1_groups[] = { "nemc-cs1", };
+static const char *jz4770_cs6_groups[] = { "nemc-cs6", };
+static const char *jz4770_i2c0_groups[] = { "i2c0-data", };
+static const char *jz4770_i2c1_groups[] = { "i2c1-data", };
+static const char *jz4770_i2c2_groups[] = { "i2c2-data", };
+static const char *jz4770_i2c3_groups[] = { "i2c3-data", };
+static const char *jz4770_i2c4_groups[] = { "i2c4-data-e", "i2c4-data-f", };
+static const char *jz4770_cim_groups[] = { "cim-data", };
+static const char *jz4770_lcd_groups[] = { "lcd-32bit", "lcd-no-pins", };
+static const char *jz4770_pwm0_groups[] = { "pwm0", };
+static const char *jz4770_pwm1_groups[] = { "pwm1", };
+static const char *jz4770_pwm2_groups[] = { "pwm2", };
+static const char *jz4770_pwm3_groups[] = { "pwm3", };
+static const char *jz4770_pwm4_groups[] = { "pwm4", };
+static const char *jz4770_pwm5_groups[] = { "pwm5", };
+static const char *jz4770_pwm6_groups[] = { "pwm6", };
+static const char *jz4770_pwm7_groups[] = { "pwm7", };
+
+static const struct function_desc jz4770_functions[] = {
+	{ "uart0", jz4770_uart0_groups, ARRAY_SIZE(jz4770_uart0_groups), },
+	{ "uart1", jz4770_uart1_groups, ARRAY_SIZE(jz4770_uart1_groups), },
+	{ "uart2", jz4770_uart2_groups, ARRAY_SIZE(jz4770_uart2_groups), },
+	{ "uart3", jz4770_uart3_groups, ARRAY_SIZE(jz4770_uart3_groups), },
+	{ "uart4", jz4770_uart4_groups, ARRAY_SIZE(jz4770_uart4_groups), },
+	{ "mmc0", jz4770_mmc0_groups, ARRAY_SIZE(jz4770_mmc0_groups), },
+	{ "mmc1", jz4770_mmc1_groups, ARRAY_SIZE(jz4770_mmc1_groups), },
+	{ "nemc", jz4770_nemc_groups, ARRAY_SIZE(jz4770_nemc_groups), },
+	{ "nemc-cs1", jz4770_cs1_groups, ARRAY_SIZE(jz4770_cs1_groups), },
+	{ "nemc-cs6", jz4770_cs6_groups, ARRAY_SIZE(jz4770_cs6_groups), },
+	{ "i2c0", jz4770_i2c0_groups, ARRAY_SIZE(jz4770_i2c0_groups), },
+	{ "i2c1", jz4770_i2c1_groups, ARRAY_SIZE(jz4770_i2c1_groups), },
+	{ "i2c2", jz4770_i2c2_groups, ARRAY_SIZE(jz4770_i2c2_groups), },
+	{ "i2c3", jz4770_i2c3_groups, ARRAY_SIZE(jz4770_i2c3_groups), },
+	{ "i2c4", jz4770_i2c4_groups, ARRAY_SIZE(jz4770_i2c4_groups), },
+	{ "cim", jz4770_cim_groups, ARRAY_SIZE(jz4770_cim_groups), },
+	{ "lcd", jz4770_lcd_groups, ARRAY_SIZE(jz4770_lcd_groups), },
+	{ "pwm0", jz4770_pwm0_groups, ARRAY_SIZE(jz4770_pwm0_groups), },
+	{ "pwm1", jz4770_pwm1_groups, ARRAY_SIZE(jz4770_pwm1_groups), },
+	{ "pwm2", jz4770_pwm2_groups, ARRAY_SIZE(jz4770_pwm2_groups), },
+	{ "pwm3", jz4770_pwm3_groups, ARRAY_SIZE(jz4770_pwm3_groups), },
+	{ "pwm4", jz4770_pwm4_groups, ARRAY_SIZE(jz4770_pwm4_groups), },
+	{ "pwm5", jz4770_pwm5_groups, ARRAY_SIZE(jz4770_pwm5_groups), },
+	{ "pwm6", jz4770_pwm6_groups, ARRAY_SIZE(jz4770_pwm6_groups), },
+	{ "pwm7", jz4770_pwm7_groups, ARRAY_SIZE(jz4770_pwm7_groups), },
+};
+
+static const struct ingenic_chip_info jz4770_chip_info = {
+	.num_chips = 6,
+	.groups = jz4770_groups,
+	.num_groups = ARRAY_SIZE(jz4770_groups),
+	.functions = jz4770_functions,
+	.num_functions = ARRAY_SIZE(jz4770_functions),
+	.pull_ups = jz4770_pull_ups,
+	.pull_downs = jz4770_pull_downs,
+};
+
+static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
+		unsigned int pin, u8 reg, bool set)
+{
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+	regmap_write(jzpc->map, offt * 0x100 +
+			(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+}
+
+static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc,
+		unsigned int pin, u8 reg)
+{
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+	unsigned int val;
+
+	regmap_read(jzpc->map, offt * 0x100 + reg, &val);
+
+	return val & BIT(idx);
+}
+
+static struct pinctrl_ops ingenic_pctlops = {
+	.get_groups_count = pinctrl_generic_get_group_count,
+	.get_group_name = pinctrl_generic_get_group_name,
+	.get_group_pins = pinctrl_generic_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
+		int pin, int func)
+{
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+	dev_dbg(jzpc->dev, "set pin P%c%u to function %u\n",
+			'A' + offt, idx, func);
+
+	if (jzpc->version >= ID_JZ4770) {
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, false);
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
+	} else {
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true);
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2);
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func > 0);
+	}
+
+	return 0;
+}
+
+static int ingenic_pinmux_set_mux(struct pinctrl_dev *pctldev,
+		unsigned int selector, unsigned int group)
+{
+	struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+	struct function_desc *func;
+	struct group_desc *grp;
+	unsigned int i;
+
+	func = pinmux_generic_get_function(pctldev, selector);
+	if (!func)
+		return -EINVAL;
+
+	grp = pinctrl_generic_get_group(pctldev, group);
+	if (!grp)
+		return -EINVAL;
+
+	dev_dbg(pctldev->dev, "enable function %s group %s\n",
+		func->name, grp->name);
+
+	for (i = 0; i < grp->num_pins; i++) {
+		int *pin_modes = grp->data;
+
+		ingenic_pinmux_set_pin_fn(jzpc, grp->pins[i], pin_modes[i]);
+	}
+
+	return 0;
+}
+
+static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+		struct pinctrl_gpio_range *range,
+		unsigned int pin, bool input)
+{
+	struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+	dev_dbg(pctldev->dev, "set pin P%c%u to %sput\n",
+			'A' + offt, idx, input ? "in" : "out");
+
+	if (jzpc->version >= ID_JZ4770) {
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_MSK, true);
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
+	} else {
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, input);
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false);
+	}
+
+	return 0;
+}
+
+static struct pinmux_ops ingenic_pmxops = {
+	.get_functions_count = pinmux_generic_get_function_count,
+	.get_function_name = pinmux_generic_get_function_name,
+	.get_function_groups = pinmux_generic_get_function_groups,
+	.set_mux = ingenic_pinmux_set_mux,
+	.gpio_set_direction = ingenic_pinmux_gpio_set_direction,
+};
+
+static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
+		unsigned int pin, unsigned long *config)
+{
+	struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+	bool pull;
+
+	if (jzpc->version >= ID_JZ4770)
+		pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
+	else
+		pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (pull)
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (!pull || !(jzpc->info->pull_ups[offt] & BIT(idx)))
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (!pull || !(jzpc->info->pull_downs[offt] & BIT(idx)))
+			return -EINVAL;
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, 1);
+	return 0;
+}
+
+static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
+		unsigned int pin, bool enabled)
+{
+	if (jzpc->version >= ID_JZ4770)
+		ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !enabled);
+	else
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled);
+}
+
+static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+		unsigned long *configs, unsigned int num_configs)
+{
+	struct ingenic_pinctrl *jzpc = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+	unsigned int cfg;
+
+	for (cfg = 0; cfg < num_configs; cfg++) {
+		switch (pinconf_to_config_param(configs[cfg])) {
+		case PIN_CONFIG_BIAS_DISABLE:
+		case PIN_CONFIG_BIAS_PULL_UP:
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			continue;
+		default:
+			return -ENOTSUPP;
+		}
+	}
+
+	for (cfg = 0; cfg < num_configs; cfg++) {
+		switch (pinconf_to_config_param(configs[cfg])) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n",
+					'A' + offt, idx);
+			ingenic_set_bias(jzpc, pin, false);
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			if (!(jzpc->info->pull_ups[offt] & BIT(idx)))
+				return -EINVAL;
+			dev_dbg(jzpc->dev, "set pull-up for pin P%c%u\n",
+					'A' + offt, idx);
+			ingenic_set_bias(jzpc, pin, true);
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			if (!(jzpc->info->pull_downs[offt] & BIT(idx)))
+				return -EINVAL;
+			dev_dbg(jzpc->dev, "set pull-down for pin P%c%u\n",
+					'A' + offt, idx);
+			ingenic_set_bias(jzpc, pin, true);
+			break;
+
+		default:
+			unreachable();
+		}
+	}
+
+	return 0;
+}
+
+static int ingenic_pinconf_group_get(struct pinctrl_dev *pctldev,
+		unsigned int group, unsigned long *config)
+{
+	const unsigned *pins;
+	unsigned int i, npins, old = 0;
+	int ret;
+
+	ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < npins; i++) {
+		if (ingenic_pinconf_get(pctldev, pins[i], config))
+			return -ENOTSUPP;
+
+		/* configs do not match between two pins */
+		if (i && (old != *config))
+			return -ENOTSUPP;
+
+		old = *config;
+	}
+
+	return 0;
+}
+
+static int ingenic_pinconf_group_set(struct pinctrl_dev *pctldev,
+		unsigned int group, unsigned long *configs,
+		unsigned int num_configs)
+{
+	const unsigned *pins;
+	unsigned int i, npins;
+	int ret;
+
+	ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < npins; i++) {
+		ret = ingenic_pinconf_set(pctldev,
+				pins[i], configs, num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct pinconf_ops ingenic_confops = {
+	.is_generic = true,
+	.pin_config_get = ingenic_pinconf_get,
+	.pin_config_set = ingenic_pinconf_set,
+	.pin_config_group_get = ingenic_pinconf_group_get,
+	.pin_config_group_set = ingenic_pinconf_group_set,
+};
+
+static struct mfd_cell ingenic_pinctrl_mfd_cells[] = {
+	{
+		.id = 0,
+		.name = "GPIOA",
+		.of_compatible = "ingenic,gpio-bank-a",
+	},
+	{
+		.id = 1,
+		.name = "GPIOB",
+		.of_compatible = "ingenic,gpio-bank-b",
+	},
+	{
+		.id = 2,
+		.name = "GPIOC",
+		.of_compatible = "ingenic,gpio-bank-c",
+	},
+	{
+		.id = 3,
+		.name = "GPIOD",
+		.of_compatible = "ingenic,gpio-bank-d",
+	},
+	{
+		.id = 4,
+		.name = "GPIOE",
+		.of_compatible = "ingenic,gpio-bank-e",
+	},
+	{
+		.id = 5,
+		.name = "GPIOF",
+		.of_compatible = "ingenic,gpio-bank-f",
+	},
+};
+
+static const struct regmap_config ingenic_pinctrl_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static const struct of_device_id ingenic_pinctrl_of_match[] = {
+	{ .compatible = "ingenic,jz4740-pinctrl", .data = (void *) ID_JZ4740 },
+	{ .compatible = "ingenic,jz4770-pinctrl", .data = (void *) ID_JZ4770 },
+	{ .compatible = "ingenic,jz4780-pinctrl", .data = (void *) ID_JZ4780 },
+	{},
+};
+
+int ingenic_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_pinctrl *jzpc;
+	struct pinctrl_desc *pctl_desc;
+	void __iomem *base;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct of_device_id *of_id = of_match_device(
+			ingenic_pinctrl_of_match, dev);
+	const struct ingenic_chip_info *chip_info;
+	unsigned int i;
+	int err;
+
+	jzpc = devm_kzalloc(dev, sizeof(*jzpc), GFP_KERNEL);
+	if (!jzpc)
+		return -ENOMEM;
+
+	base = devm_ioremap_resource(dev,
+			platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(base)) {
+		dev_err(dev, "Failed to ioremap registers\n");
+		return PTR_ERR(base);
+	}
+
+	jzpc->map = devm_regmap_init_mmio(dev, base,
+			&ingenic_pinctrl_regmap_config);
+	if (IS_ERR(jzpc->map)) {
+		dev_err(dev, "Failed to create regmap\n");
+		return PTR_ERR(jzpc->map);
+	}
+
+	jzpc->dev = dev;
+
+	if (of_id)
+		jzpc->version = (enum jz_version)of_id->data;
+	else
+		jzpc->version = (enum jz_version)id->driver_data;
+
+	if (jzpc->version >= ID_JZ4770)
+		chip_info = &jz4770_chip_info;
+	else
+		chip_info = &jz4740_chip_info;
+	jzpc->info = chip_info;
+
+	pctl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctl_desc), GFP_KERNEL);
+	if (!pctl_desc)
+		return -ENOMEM;
+
+	/* fill in pinctrl_desc structure */
+	pctl_desc->name = dev_name(dev);
+	pctl_desc->owner = THIS_MODULE;
+	pctl_desc->pctlops = &ingenic_pctlops;
+	pctl_desc->pmxops = &ingenic_pmxops;
+	pctl_desc->confops = &ingenic_confops;
+	pctl_desc->npins = chip_info->num_chips * PINS_PER_GPIO_CHIP;
+	pctl_desc->pins = jzpc->pdesc = devm_kzalloc(&pdev->dev,
+			sizeof(*jzpc->pdesc) * pctl_desc->npins, GFP_KERNEL);
+	if (!jzpc->pdesc)
+		return -ENOMEM;
+
+	for (i = 0; i < pctl_desc->npins; i++) {
+		jzpc->pdesc[i].number = i;
+		jzpc->pdesc[i].name = kasprintf(GFP_KERNEL, "P%c%d",
+						'A' + (i / PINS_PER_GPIO_CHIP),
+						i % PINS_PER_GPIO_CHIP);
+	}
+
+	jzpc->pctl = devm_pinctrl_register(dev, pctl_desc, jzpc);
+	if (!jzpc->pctl) {
+		dev_err(dev, "Failed to register pinctrl\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < chip_info->num_groups; i++) {
+		const struct group_desc *group = &chip_info->groups[i];
+
+		err = pinctrl_generic_add_group(jzpc->pctl, group->name,
+				group->pins, group->num_pins, group->data);
+		if (err) {
+			dev_err(dev, "Failed to register group %s\n",
+					group->name);
+			return err;
+		}
+	}
+
+	for (i = 0; i < chip_info->num_functions; i++) {
+		const struct function_desc *func = &chip_info->functions[i];
+
+		err = pinmux_generic_add_function(jzpc->pctl, func->name,
+				func->group_names, func->num_group_names,
+				func->data);
+		if (err) {
+			dev_err(dev, "Failed to register function %s\n",
+					func->name);
+			return err;
+		}
+	}
+
+	dev_set_drvdata(dev, jzpc->map);
+
+	err = devm_mfd_add_devices(dev, 0, ingenic_pinctrl_mfd_cells,
+			ARRAY_SIZE(ingenic_pinctrl_mfd_cells), NULL, 0, NULL);
+	if (err) {
+		dev_err(dev, "Failed to add MFD devices\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id ingenic_pinctrl_ids[] = {
+	{ "jz4740-pinctrl", ID_JZ4740 },
+	{ "jz4770-pinctrl", ID_JZ4770 },
+	{ "jz4780-pinctrl", ID_JZ4780 },
+	{},
+};
+
+static struct platform_driver ingenic_pinctrl_driver = {
+	.driver = {
+		.name = "pinctrl-ingenic",
+		.of_match_table = of_match_ptr(ingenic_pinctrl_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe = ingenic_pinctrl_probe,
+	.id_table = ingenic_pinctrl_ids,
+};
+
+static int __init ingenic_pinctrl_drv_register(void)
+{
+	return platform_driver_register(&ingenic_pinctrl_driver);
+}
+postcore_initcall(ingenic_pinctrl_drv_register);
-- 
2.11.0

  parent reply	other threads:[~2017-04-02 20:44 UTC|newest]

Thread overview: 162+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-17 23:14 [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-01-17 23:14 ` [PATCH 01/13] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-18 23:45   ` Linus Walleij
2017-01-17 23:14 ` [PATCH 02/13] pinctrl-jz4740: add a pinctrl driver for the Ingenic jz4740 SoC Paul Cercueil
2017-01-18 10:16   ` Linus Walleij
2017-01-17 23:14 ` [PATCH 03/13] pinctrl-jz4780: add a pinctrl driver for the Ingenic jz4780 SoC Paul Cercueil
2017-01-17 23:14 ` [PATCH 04/13] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-17 23:14 ` [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver Paul Cercueil
2017-01-18 23:50   ` Linus Walleij
2017-01-17 23:14 ` [PATCH 06/13] MIPS: jz4780: DTS: Add node for the jz4780-pinctrl driver Paul Cercueil
2017-01-17 23:14 ` [PATCH 07/13] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-17 23:14 ` [PATCH 08/13] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-17 23:14 ` [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-19 10:55   ` Ulf Hansson
2017-01-20 11:59     ` Paul Cercueil
2017-01-17 23:14 ` [PATCH 10/13] mtd: nand: " Paul Cercueil
2017-01-27 17:33   ` Boris Brezillon
2017-01-17 23:14 ` [PATCH 11/13] fbdev: jz4740-fb: " Paul Cercueil
2017-01-17 23:14 ` [PATCH 12/13] pwm: jz4740: " Paul Cercueil
2017-01-18  7:20   ` Thierry Reding
2017-01-17 23:14 ` [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-18  7:27   ` Thierry Reding
2017-01-19 11:24     ` Paul Cercueil
2017-01-19  9:07   ` Linus Walleij
2017-01-20 10:01     ` Paul Cercueil
2017-01-18  7:15 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Thierry Reding
2017-01-19 11:19   ` Paul Cercueil
2017-01-20  8:40     ` Linus Walleij
2017-01-20 10:17       ` Paul Cercueil
2017-01-22 14:49     ` [PATCH v2 00/14] " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-27 11:18         ` Linus Walleij
2017-01-27 15:27           ` Paul Cercueil
2017-01-31 12:59             ` Linus Walleij
2017-01-22 14:49       ` [PATCH v2 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-01-22 16:21         ` kbuild test robot
2017-01-22 16:21           ` kbuild test robot
2017-01-22 17:49         ` kbuild test robot
2017-01-22 17:49           ` kbuild test robot
2017-01-22 17:49         ` [PATCH] GPIO: fix semicolon.cocci warnings kbuild test robot
2017-01-22 17:49           ` kbuild test robot
2017-01-22 14:49       ` [PATCH v2 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 07/14] MIPS: jz4780: " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-23 10:40         ` Ulf Hansson
2017-01-22 14:49       ` [PATCH v2 11/14] mtd: nand: " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 13/14] pwm: jz4740: " Paul Cercueil
2017-01-22 14:49       ` [PATCH v2 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-25 18:51     ` [PATCH v3 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-01-25 18:51       ` [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-01-30 20:36         ` Rob Herring
2017-01-30 20:36           ` Rob Herring
2017-01-31 10:31           ` Paul Cercueil
2017-01-31 13:09             ` Linus Walleij
2017-02-09 17:28               ` Paul Cercueil
2017-02-20 13:56                 ` Linus Walleij
2017-02-21 11:20                   ` Paul Cercueil
2017-02-23  9:59                     ` Linus Walleij
2017-04-02 20:42         ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-04-04 14:48             ` Rob Herring
2017-04-28 20:08             ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil
2017-05-12 16:52                 ` [PATCH v6 " Paul Cercueil
2017-05-12 16:52                   ` [PATCH v6 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-05-12 16:52                   ` [PATCH v6 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-05-12 16:52                   ` [PATCH v6 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-05-12 16:52                   ` [PATCH v6 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-05-12 16:52                   ` [PATCH v6 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 07/14] MIPS: jz4780: " Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 11/14] mtd: nand: " Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 13/14] pwm: jz4740: " Paul Cercueil
2017-05-12 16:53                   ` [PATCH v6 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-05-05 19:57                 ` Rob Herring
2017-04-28 20:08               ` [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-05-03  9:12                 ` Paul Cercueil
2017-05-11 11:01                   ` Linus Walleij
2017-04-28 20:08               ` [PATCH v5 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-05-07 22:05                 ` Paul Cercueil
2017-05-11 11:06                   ` Linus Walleij
2017-04-28 20:08               ` [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-05-11 11:08                 ` Linus Walleij
2017-05-12 17:00                   ` Paul Cercueil
2017-05-22 15:31                 ` Linus Walleij
2017-07-02 16:35                   ` Paul Cercueil
2017-07-03  9:07                     ` Linus Walleij
2017-07-03 13:55                       ` Ralf Baechle
2017-07-31 13:29                         ` Linus Walleij
2017-04-28 20:08               ` [PATCH v5 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 07/14] MIPS: jz4780: " Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 11/14] mtd: nand: " Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 13/14] pwm: jz4740: " Paul Cercueil
2017-04-28 20:08               ` [PATCH v5 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil
2017-04-04 14:52             ` Rob Herring
2017-04-02 20:42           ` Paul Cercueil [this message]
2017-04-07  9:41             ` [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Linus Walleij
2017-04-07 10:56               ` Lee Jones
2017-04-02 20:42           ` [PATCH v4 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-04-03 14:15             ` kbuild test robot
2017-04-03 14:15               ` kbuild test robot
2017-04-07  9:34             ` Linus Walleij
2017-04-02 20:42           ` [PATCH v4 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-04-03  9:57             ` Sergei Shtylyov
2017-04-03 10:20               ` Paul Cercueil
2017-04-03 10:32                 ` Sergei Shtylyov
2017-04-07  9:44             ` Linus Walleij
2017-04-07 13:57               ` Paul Cercueil
2017-04-24 12:58                 ` Linus Walleij
2017-04-02 20:42           ` [PATCH v4 07/14] MIPS: jz4780: " Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 11/14] mtd: nand: " Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-04-02 20:42           ` [PATCH v4 13/14] pwm: jz4740: " Paul Cercueil
2017-04-06 14:40             ` Thierry Reding
2017-04-02 20:42           ` [PATCH v4 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-25 18:51       ` [PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil
2017-01-30 20:33         ` Rob Herring
2017-01-25 18:51       ` [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil
2017-01-31 14:05         ` Linus Walleij
2017-01-31 14:12           ` Paul Cercueil
2017-01-25 18:51       ` [PATCH v3 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil
2017-01-31 14:13         ` Linus Walleij
2017-02-09 17:14           ` Paul Cercueil
2017-02-12 20:48             ` Linus Walleij
2017-01-31 14:20         ` Linus Walleij
2017-01-31 15:29           ` Paul Cercueil
2017-02-03 13:58             ` Linus Walleij
2017-01-25 18:51       ` [PATCH v3 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil
2017-01-25 18:51       ` [PATCH v3 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil
2017-01-31 14:16         ` Linus Walleij
2017-01-25 18:52       ` [PATCH v3 07/14] MIPS: jz4780: " Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 09/14] MIPS: JZ4780: CI20: " Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil
2017-01-26  6:11         ` kbuild test robot
2017-01-26  6:11           ` kbuild test robot
2017-01-26 10:10           ` Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 11/14] mtd: nand: " Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 12/14] fbdev: jz4740-fb: " Paul Cercueil
2017-01-30 16:10         ` Bartlomiej Zolnierkiewicz
2017-01-25 18:52       ` [PATCH v3 13/14] pwm: jz4740: " Paul Cercueil
2017-01-25 18:52       ` [PATCH v3 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil
2017-01-19  6:38 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170402204244.14216-4-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=b.zolnierkie@samsung.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gnurou@gmail.com \
    --cc=james.hogan@imgtec.com \
    --cc=lars@metafoo.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=maarten@treewalker.org \
    --cc=mark.rutland@arm.com \
    --cc=paul.burton@imgtec.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).