[PATCH 0/6] irqchip/irq-bcm7038-l1 updates

[PATCH 0/6] irqchip/irq-bcm7038-l1 updates

[Florian Fainelli]

Hi Marc, Jason, Thomas,

This patch series contains some updates from our internal tree to
support power management and allow configuring specific instances of the
brcm,bcm7038-l1-intc to leave some interrupts untouched and how the
firmware might have configured them.

Florian Fainelli (5):
  dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt
  irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary
  dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc
  irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask
  fixup! irqchip/irq-bcm7038-l1: Add PM support

Justin Chen (1):
  irqchip/irq-bcm7038-l1: Add PM support

 .../brcm,bcm7038-l1-intc.txt                  |   9 ++
 drivers/irqchip/irq-bcm7038-l1.c              | 117 +++++++++++++++++-
 2 files changed, 124 insertions(+), 2 deletions(-)

-- 
2.17.1

[PATCH 1/6] irqchip/irq-bcm7038-l1: Add PM support

[Florian Fainelli]

From: Justin Chen <justinpopo6@gmail.com>

The current l1 controller does not mask any interrupts when dropping
into suspend. This mean we can receive unexpected wake up sources.
Modified MIPS l1 controller to mask the all non-wake interrupts before
dropping into suspend.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 98 ++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index fc75c61233aa..c7e37eefec6d 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/syscore_ops.h>
 
 #define IRQS_PER_WORD		32
 #define REG_BYTES_PER_IRQ_WORD	(sizeof(u32) * 4)
@@ -39,6 +40,10 @@ struct bcm7038_l1_chip {
 	unsigned int		n_words;
 	struct irq_domain	*domain;
 	struct bcm7038_l1_cpu	*cpus[NR_CPUS];
+#ifdef CONFIG_PM_SLEEP
+	struct list_head	list;
+	u32			wake_mask[MAX_WORDS];
+#endif
 	u8			affinity[MAX_WORDS * IRQS_PER_WORD];
 };
 
@@ -47,6 +52,17 @@ struct bcm7038_l1_cpu {
 	u32			mask_cache[0];
 };
 
+/*
+ * We keep a list of bcm7038_l1_chip used for suspend/resume. This hack is
+ * used because the struct chip_type suspend/resume hooks are not called
+ * unless chip_type is hooked onto a generic_chip. Since this driver does
+ * not use generic_chip, we need to manually hook our resume/suspend to
+ * syscore_ops.
+ */
+#ifdef CONFIG_PM_SLEEP
+static LIST_HEAD(bcm7038_l1_intcs_list);
+#endif
+
 /*
  * STATUS/MASK_STATUS/MASK_SET/MASK_CLEAR are packed one right after another:
  *
@@ -287,6 +303,77 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int bcm7038_l1_suspend(void)
+{
+	struct bcm7038_l1_chip *intc;
+	unsigned long flags;
+	int boot_cpu, word;
+
+	/* Wakeup interrupt should only come from the boot cpu */
+	boot_cpu = cpu_logical_map(smp_processor_id());
+
+	list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
+		raw_spin_lock_irqsave(&intc->lock, flags);
+		for (word = 0; word < intc->n_words; word++) {
+			l1_writel(~intc->wake_mask[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_set(intc, word));
+			l1_writel(intc->wake_mask[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_clr(intc, word));
+		}
+		raw_spin_unlock_irqrestore(&intc->lock, flags);
+	}
+
+	return 0;
+}
+
+static void bcm7038_l1_resume(void)
+{
+	struct bcm7038_l1_chip *intc;
+	unsigned long flags;
+	int boot_cpu, word;
+
+	boot_cpu = cpu_logical_map(smp_processor_id());
+
+	list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
+		raw_spin_lock_irqsave(&intc->lock, flags);
+		for (word = 0; word < intc->n_words; word++) {
+			l1_writel(intc->cpus[boot_cpu]->mask_cache[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_set(intc, word));
+			l1_writel(~intc->cpus[boot_cpu]->mask_cache[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_clr(intc, word));
+		}
+		raw_spin_unlock_irqrestore(&intc->lock, flags);
+	}
+}
+
+static struct syscore_ops bcm7038_l1_syscore_ops = {
+	.suspend	= bcm7038_l1_suspend,
+	.resume		= bcm7038_l1_resume,
+};
+
+static int bcm7038_l1_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	u32 word = d->hwirq / IRQS_PER_WORD;
+	u32 mask = BIT(d->hwirq % IRQS_PER_WORD);
+
+	raw_spin_lock_irqsave(&intc->lock, flags);
+	if (on)
+		intc->wake_mask[word] |= mask;
+	else
+		intc->wake_mask[word] &= ~mask;
+	raw_spin_unlock_irqrestore(&intc->lock, flags);
+
+	return 0;
+}
+#endif
+
 static struct irq_chip bcm7038_l1_irq_chip = {
 	.name			= "bcm7038-l1",
 	.irq_mask		= bcm7038_l1_mask,
@@ -295,6 +382,9 @@ static struct irq_chip bcm7038_l1_irq_chip = {
 #ifdef CONFIG_SMP
 	.irq_cpu_offline	= bcm7038_l1_cpu_offline,
 #endif
+#if CONFIG_PM_SLEEP
+	.irq_set_wake		= bcm7038_l1_set_wake,
+#endif
 };
 
 static int bcm7038_l1_map(struct irq_domain *d, unsigned int virq,
@@ -340,6 +430,14 @@ int __init bcm7038_l1_of_init(struct device_node *dn,
 		goto out_unmap;
 	}
 
+#ifdef CONFIG_PM_SLEEP
+	/* Add bcm7038_l1_chip into a list */
+	INIT_LIST_HEAD(&intc->list);
+	list_add_tail(&intc->list, &bcm7038_l1_intcs_list);
+
+	register_syscore_ops(&bcm7038_l1_syscore_ops);
+#endif
+
 	pr_info("registered BCM7038 L1 intc (%pOF, IRQs: %d)\n",
 		dn, IRQS_PER_WORD * intc->n_words);
 
-- 
2.17.1

[PATCH 2/6] dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt

[Florian Fainelli]

The BCM7038 L1 interrupt controller can be used as a wake-up interrupt
controller on MIPS and ARM-based systems, document the brcm,irq-can-wake
which has been "standardized" across Broadcom interrupt controllers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt   | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index 2117d4ac1ae5..4eb043270f5b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -31,6 +31,11 @@ Required properties:
 - interrupts: specifies the interrupt line(s) in the interrupt-parent controller
   node; valid values depend on the type of parent interrupt controller
 
+Optional properties:
+
+- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
+  wakeup source for system suspend/resume.
+
 If multiple reg ranges and interrupt-parent entries are present on an SMP
 system, the driver will allow IRQ SMP affinity to be set up through the
 /proc/irq/ interface.  In the simplest possible configuration, only one
-- 
2.17.1

[PATCH 3/6] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

[Florian Fainelli]

If the 'brcm,irq-can-wake' property is specified, make sure we also
enable the corresponding parent interrupt we are attached to.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index c7e37eefec6d..0ad473249f16 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -297,6 +297,10 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 		pr_err("failed to map parent interrupt %d\n", parent_irq);
 		return -EINVAL;
 	}
+
+	if (of_property_read_bool(dn, "brcm,irq-can-wake"))
+		enable_irq_wake(parent_irq);
+
 	irq_set_chained_handler_and_data(parent_irq, bcm7038_l1_irq_handle,
 					 intc);
 
-- 
2.17.1

[PATCH 4/6] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc

[Florian Fainelli]

Indicate that the brcm,int-fwd-mask property is optional and can be
optionaly set on platforms which require to leave specific interrupts
untouched from Linux and retain the firmware configuration.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index 4eb043270f5b..31d31af408c5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -36,6 +36,10 @@ Optional properties:
 - brcm,irq-can-wake: If present, this means the L1 controller can be used as a
   wakeup source for system suspend/resume.
 
+- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
+  have already been configured by the firmware and should be left untouched.
+  This should have one 32-bit word per status/set/clear/mask group.
+
 If multiple reg ranges and interrupt-parent entries are present on an SMP
 system, the driver will allow IRQ SMP affinity to be set up through the
 /proc/irq/ interface.  In the simplest possible configuration, only one
-- 
2.17.1

[PATCH 5/6] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask

[Florian Fainelli]

On some specific chips like 7211 we need to leave some interrupts
untouched/forwarded to the VPU which is another agent in the system
making use of that interrupt controller hardware (goes to both ARM GIC
and VPU L1 interrupt controller). Make that possible by using the
existing brcm,int-fwd-mask property.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 0ad473249f16..5e8f0fbc5f20 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -44,6 +44,7 @@ struct bcm7038_l1_chip {
 	struct list_head	list;
 	u32			wake_mask[MAX_WORDS];
 #endif
+	u32			irq_fwd_mask[MAX_WORDS];
 	u8			affinity[MAX_WORDS * IRQS_PER_WORD];
 };
 
@@ -265,6 +266,7 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	resource_size_t sz;
 	struct bcm7038_l1_cpu *cpu;
 	unsigned int i, n_words, parent_irq;
+	int ret;
 
 	if (of_address_to_resource(dn, idx, &res))
 		return -EINVAL;
@@ -278,6 +280,14 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	else if (intc->n_words != n_words)
 		return -EINVAL;
 
+	ret = of_property_read_u32_array(dn , "brcm,int-fwd-mask",
+					 intc->irq_fwd_mask, n_words);
+	if (ret != 0 && ret != -EINVAL) {
+		/* property exists but has the wrong number of words */
+		pr_err("invalid brcm,int-fwd-mask property\n");
+		return -EINVAL;
+	}
+
 	cpu = intc->cpus[idx] = kzalloc(sizeof(*cpu) + n_words * sizeof(u32),
 					GFP_KERNEL);
 	if (!cpu)
@@ -288,8 +298,9 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 		return -ENOMEM;
 
 	for (i = 0; i < n_words; i++) {
-		l1_writel(0xffffffff, cpu->map_base + reg_mask_set(intc, i));
-		cpu->mask_cache[i] = 0xffffffff;
+		l1_writel(0xffffffff & ~intc->irq_fwd_mask[i],
+			  cpu->map_base + reg_mask_set(intc, i));
+		cpu->mask_cache[i] = 0xffffffff & ~intc->irq_fwd_mask[i];
 	}
 
 	parent_irq = irq_of_parse_and_map(dn, idx);
-- 
2.17.1

[PATCH 6/6] fixup! irqchip/irq-bcm7038-l1: Add PM support

[Florian Fainelli]

---
 drivers/irqchip/irq-bcm7038-l1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 5e8f0fbc5f20..811a34201dd4 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -397,7 +397,7 @@ static struct irq_chip bcm7038_l1_irq_chip = {
 #ifdef CONFIG_SMP
 	.irq_cpu_offline	= bcm7038_l1_cpu_offline,
 #endif
-#if CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
 	.irq_set_wake		= bcm7038_l1_set_wake,
 #endif
 };
-- 
2.17.1

Re: [PATCH 6/6] fixup! irqchip/irq-bcm7038-l1: Add PM support

[Florian Fainelli]

On 9/13/19 12:10 PM, Florian Fainelli wrote:
> ---
>  drivers/irqchip/irq-bcm7038-l1.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
> index 5e8f0fbc5f20..811a34201dd4 100644
> --- a/drivers/irqchip/irq-bcm7038-l1.c
> +++ b/drivers/irqchip/irq-bcm7038-l1.c
> @@ -397,7 +397,7 @@ static struct irq_chip bcm7038_l1_irq_chip = {
>  #ifdef CONFIG_SMP
>  	.irq_cpu_offline	= bcm7038_l1_cpu_offline,
>  #endif
> -#if CONFIG_PM_SLEEP
> +#ifdef CONFIG_PM_SLEEP
>  	.irq_set_wake		= bcm7038_l1_set_wake,
>  #endif
>  };
> 

This should have been part of patch #1, I will resubmit this series,
sorry about that.
-- 
Florian