Re: [PATCH v5 3/7] dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema

[Paul Cercueil <paul@crapouillou.net>]

Hi Nikolaus,

Le mar., oct. 5 2021 at 14:29:15 +0200, H. Nikolaus Schaller 
<hns@goldelico.com> a écrit :
> From: Sam Ravnborg <sam@ravnborg.org>
> 
> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
> Based on .txt binding from Zubair Lutfullah Kakakhel
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> ---
>  .../bindings/display/ingenic-jz4780-hdmi.yaml | 79 
> +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml 
> b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> new file mode 100644
> index 000000000000..5bcb342da86f
> --- /dev/null
> +++ 
> b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/ingenic-jz4780-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Ingenic JZ4780 HDMI Transmitter
> +
> +maintainers:
> +  - H. Nikolaus Schaller <hns@goldelico.com>
> +
> +description: |
> +  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys 
> DesignWare HDMI 1.4
> +  TX controller IP with accompanying PHY IP.

My dmesg disagrees:
dw-hdmi-ingenic 10180000.hdmi: Detected HDMI TX controller v1.31a with 
HDCP (DWC HDMI 3D TX PHY)

Or am I comparing apples to oranges?

> +
> +allOf:
> +  - $ref: bridge/synopsys,dw-hdmi.yaml#
> +
> +properties:
> +  compatible:
> +    const: ingenic,jz4780-dw-hdmi
> +
> +  reg-io-width:
> +    const: 4
> +
> +  clocks:
> +    maxItems: 2
> +
> +  hdmi-5v-supply:
> +    description: Optional regulator to provide +5V at the connector
> +
> +  ddc-i2c-bus:
> +    description: An I2C interface if the internal DDC I2C driver is 
> not to be used

This property is used within 
(drivers/gpu/drm/bridge/synopsys/dw-hdmi.c); I think it would make 
sense to move it to bridge/synopsys,dw-hdmi.yaml.

Cheers,
-Paul

> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +required:
> +    - compatible
> +    - clocks
> +    - clock-names
> +    - ports
> +    - reg-io-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/jz4780-cgu.h>
> +
> +    hdmi: hdmi@10180000 {
> +        compatible = "ingenic,jz4780-dw-hdmi";
> +        reg = <0x10180000 0x8000>;
> +        reg-io-width = <4>;
> +        ddc-i2c-bus = <&i2c4>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <3>;
> +        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
> +        clock-names = "iahb", "isfr";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            hdmi_in: port@0 {
> +                reg = <0>;
> +                dw_hdmi_in: endpoint {
> +                    remote-endpoint = <&jz4780_lcd_out>;
> +                };
> +            };
> +            hdmi_out: port@1 {
> +                reg = <1>;
> +                dw_hdmi_out: endpoint {
> +                    remote-endpoint = <&hdmi_con>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> --
> 2.33.0
>