Linux-mm Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/8] Introduce Data Access MONitor (DAMON)
@ 2020-01-20 16:27 SeongJae Park
  2020-01-20 16:27 ` [PATCH 1/8] mm: " SeongJae Park
                   ` (5 more replies)
  0 siblings, 6 replies; 13+ messages in thread
From: SeongJae Park @ 2020-01-20 16:27 UTC (permalink / raw)
  To: akpm
  Cc: SeongJae Park, acme, brendan.d.gregg, corbet, mgorman, dwmw,
	amit, rostedt, sj38.park, linux-mm, linux-doc, linux-kernel

From: SeongJae Park <sjpark@amazon.de>

This patchset introduces a new kernel module for practical monitoring of
data accesses, namely DAMON.

The patches are organized in the following sequence.  The first four
patches implements the core logic of DAMON one by one.  After that, the
second patch allow users to use DAMON by implementing a debugfs based
low level interface.  To provide a minimal reference to the low level
interfaces and for more convenient test of the DAMON itself, the third
patch implements an user space tool for the DAMON.  The fourth patch
adds a document for administrators of DAMON, and finally the fifth patch
provides DAMON's unit tests, which is using the kunit framework.

The patches are based on the v5.4 plus the back-ported kunit, which
retrieved from v5.5-rc1.  You can also clone the complete git tree by:

    $ git clone git://github.com/sjp38/linux -b damon/patches/v1

The web is also available:
https://github.com/sjp38/linux/releases/tag/damon/patches/v1


Patch History
-------------

Changes from RFC v1
(https://lore.kernel.org/linux-mm/20200110131522.29964-1-sjpark@amazon.com/)
 - Split core logic of DAMON for more convenient review
 - Specify an ambiguous plan of access pattern based mm optimizations
 - Support loadable module build
 - Cleanup code

----

DAMON is a kernel module that allows users to monitor the actual memory
access pattern of specific user-space processes.  It aims to be 1)
accurate enough to be useful for performance-centric domains, and 2)
sufficiently light-weight so that it can be applied online.

For the goals, DAMON utilizes its two core mechanisms, called
region-based sampling and adaptive regions adjustment.  The region-based
sampling allows users to make their own trade-off between the quality
and the overhead of the monitoring and set the upperbound of the
monitoring overhead.  Further, the adaptive regions adjustment mechanism
makes DAMON to maximize the quality and minimize the overhead with its
best efforts while preserving the users configured trade-off.

Please note that the term 'memory' in this document means 'main memory'.
It also assumes that it would usually utilizes the middle level speed
memory devices such as DRAMs or NVRAMs.  CPU caches or storage devices
are not our concern, as those are too fast or too slow to be in DAMON's
scope.


Background
==========

For performance-centric analysis and optimizations of memory management
schemes (either that of kernel space or user space), the actual data
access pattern of the workloads is highly useful.  The information need
to be only reasonable rather than strictly correct, because some level
of incorrectness can be handled in many performance-centric domains.  It
also need to be taken within reasonably short time with only
light-weight overhead.

Manually extracting such data is not easy and time consuming if the
target workload is huge and complex, even for the developers of the
programs.  There are a range of tools and techniques developed for
general memory access investigations, and some of those could be
partially used for this purpose.  However, most of those are not
practical or unscalable, mainly because those are designed with no
consideration about the trade-off between the accuracy of the output and
the overhead.

The memory access instrumentation techniques which is applied to many
tools such as Intel PIN is essential for correctness required cases such
as invalid memory access bug detections.  However, those usually incur
high overhead which is unacceptable for many of the performance-centric
domains.  Periodic access checks based on H/W or S/W access counting
features (e.g., the Accessed bits of PTEs or the PG_Idle flags of pages)
can dramatically decrease the overhead by forgiving some of the quality,
compared to the instrumentation based techniques.  The reduced quality
is still reasonable for many of the domains, but the overhead can
arbitrarily increase as the size of the target workload grows.
Miniature-like static region based sampling can set the upperbound of
the overhead, but it will now decrease the quality of the output as the
size of the workload grows.


Related Works
=============

There are a number of researches[1,2,3,4,5,6] optimizing memory
management mechanisms based on the actual memory access patterns that
shows impressive results.  However, most of those has no deep
consideration about the monitoring of the accesses itself.  Some of
those focused on the overhead of the monitoring, but does not consider
the accuracy scalability[6] or has additional dependencies[7].  Indeed,
one recent research[5] about the proactive reclamation has also
proposed[8] to the kernel community but the monitoring overhead was
considered a main problem.

[1] Subramanya R Dulloor, Amitabha Roy, Zheguang Zhao, Narayanan
    Sundaram, Nadathur Satish, Rajesh Sankaran, Jeff Jackson, and
    Karsten Schwan. 2016.  Data tiering in heterogeneous memory systems.
    In Proceedings of the 11th European Conference on Computer Systems
    (EuroSys). ACM, 15.
[2] Youngjin Kwon, Hangchen Yu, Simon Peter, Christopher J Rossbach, and
    Emmett Witchel. 2016. Coordinated and efficient huge page management
    with ingens.  In 12th USENIX Symposium on Operating Systems Design
    and Implementation (OSDI).  705–721.
[3] Harald Servat, Antonio J Peña, Germán Llort, Estanislao Mercadal,
    HansChristian Hoppe, and Jesús Labarta. 2017. Automating the
    application data placement in hybrid memory systems. In 2017 IEEE
    International Conference on Cluster Computing (CLUSTER). IEEE, 126–136.
[4] Vlad Nitu, Boris Teabe, Alain Tchana, Canturk Isci, and Daniel
    Hagimont.  2018. Welcome to zombieland: practical and
    energy-efficient memory disaggregation in a datacenter. In
    Proceedings of the 13th European Conference on Computer Systems
    (EuroSys). ACM, 16.
[5] Andres Lagar-Cavilla, Junwhan Ahn, Suleiman Souhlal, Neha Agarwal,
    Radoslaw Burny, Shakeel Butt, Jichuan Chang, Ashwin Chaugule, Nan
    Deng, Junaid Shahid, Greg Thelen, Kamil Adam Yurtsever, Yu Zhao, and
    Parthasarathy Ranganathan.  2019. Software-Defined Far Memory in
    Warehouse-Scale Computers.  In Proceedings of the 24th International
    Conference on Architectural Support for Programming Languages and
    Operating Systems (ASPLOS).  ACM, New York, NY, USA, 317–330.
    DOI:https://doi.org/10.1145/3297858.3304053
[6] Carl Waldspurger, Trausti Saemundsson, Irfan Ahmad, and Nohhyun
    Park.  2017. Cache Modeling and Optimization using Miniature
    Simulations. In 2017 USENIX Annual Technical Conference (ATC).
    USENIX Association, Santa Clara, CA, 487–498.
    https://www.usenix.org/conference/atc17/technical-sessions/
[7] Haojie Wang, Jidong Zhai, Xiongchao Tang, Bowen Yu, Xiaosong Ma, and
    Wenguang Chen. 2018. Spindle: Informed Memory Access Monitoring. In
    2018 USENIX Annual Technical Conference (ATC). USENIX Association,
    Boston, MA, 561–574.
    https://www.usenix.org/conference/atc18/presentation/wang-haojie
[8] Jonathan Corbet. 2019. Proactively reclaiming idle memory. (2019).
    https://lwn.net/Articles/787611/.


Expected Use-cases
==================

A straightforward usecase of DAMON would be the program behavior
analysis.  With the DAMON output, users can confirm whether the program
is running as intended or not.  This will be useful for debuggings and
tests of design points.

The monitored results can also be useful for counting the dynamic
working set size of workloads.  For the administration of memory
overcommitted systems or selection of the environments (e.g., containers
providing different amount of memory) for your workloads, this will be
useful.

If you are a programmer, you can optimize your program by managing the
memory based on the actual data access pattern.  For example, you can
identify the dynamic hotness of your data using DAMON and call
``mlock()`` to keep your hot data in DRAM, or call ``madvise()`` with
``MADV_PAGEOUT`` to proactively reclaim cold data.  Even though your
program is guaranteed to not encounter memory pressure, you can still
improve the performance by applying the DAMON outputs for call of
``MADV_HUGEPAGE`` and ``MADV_NOHUGEPAGE``.  More creative optimizations
would be possible.  Our evaluations of DAMON includes a straightforward
optimization using the ``mlock()``.  Please refer to the below
Evaluation section for more detail.

As DAMON incurs very low overhead, such optimizations can be applied not
only offline, but also online.  Also, there is no reason to limit such
optimizations to the user space.  Several parts of the kernel's memory
management mechanisms could be also optimized using DAMON. The
reclamation, the THP (de)promotion decisions, and the compaction would
be such a candidates.  Nevertheless, current version of DAMON is not
highly optimized for the online/in-kernel uses.


A Future Plan: Data Access Based Optimizations Support
------------------------------------------------------

As described in the above section, DAMON could be helpful for actual
access based memory management optimizations.  Nevertheless, users who
want to do such optimizations should run DAMON, read the traced data
(either online or offline), analyze it, plan a new memory management
scheme, and apply the new scheme by themselves.  It must be easier than
the past, but could still require some level of efforts.  In its next
development stage, DAMON will reduce some of such efforts by allowing
users to specify some access based memory management rules for their
specific processes.

Because this is just a plan, the specific interface is not fixed yet,
but for example, users will be allowed to write their desired memory
management rules to a special file in a DAMON specific format.  The
rules will be something like 'if a memory region of size in a range is
keeping a range of hotness for more than a duration, apply specific
memory management rule using madvise() or mlock() to the region'.  For
example, we can imagine rules like below:

    $ cat <debugfs>/damon/rules
    # format is: <min/max size> <min/max frequency> <duration> <action>
    # Below rules assume the frequency score is in [0,20].

    # if a region of a size keeps a very high access frequency for more
    # than 100ms, lock the region in the main memory (call mlock()).
    # But, if the region is larger than 500 MiB, skip it.  The exception
    # might be helpful if the system has only, say, 600 MiB of DRAM, a
    # region of size larger than 600 MiB cannot be locked in the DRAM at
    # all.
    na 500M 15 20 100ms mlock

    # if a region keeps a high access frequency for more than 100ms, put
    # the region in the head of the LRU list (call madvise() with
    # MADV_WILLNEED).
    na na 12 15 100ms madv_willneed

    # if a region keeps a low access frequency for more than 100ms, put
    # the region in the tail of the LRU list (call madvise() with
    # MADV_COLD).
    na na 3  5  100ms madv_cold

    # if a region keeps a very low access frequency for more than 100ms,
    # swap out the region immediately (call madvise() with
    # MADV_PAGEOUT).
    na na 0  3  100ms madv_pageout

    # if a region of size bigger than 2MB keeps a very high access
    # frequency for more than 100ms, let the region to use huge pages
    # (call madvise() with MADV_HUGEPAGE).
    2M na 15 20 100ms madv_hugepage

    # If a regions of size bigger than > 2MB keeps no high access
    # frequency for more than 100ms, avoid the region from using huge
    # pages (call madvise() with MADV_NOHUGEPAGE).
    2M na 0 15 100ms madv_nohugepage


Mechanisms of DAMON
===================


Basic Access Check
------------------

DAMON basically reports what pages are how frequently accessed.  The
report is passed to users in binary format via a ``result file`` which
users can set it's path.  Note that the frequency is not an absolute
number of accesses, but a relative frequency among the pages of the
target workloads.

Users can also control the resolution of the reports by setting two time
intervals, ``sampling interval`` and ``aggregation interval``.  In
detail, DAMON checks access to each page per ``sampling interval``,
aggregates the results (counts the number of the accesses to each page),
and reports the aggregated results per ``aggregation interval``.  For
the access check of each page, DAMON uses the Accessed bits of PTEs.

This is thus similar to the previously mentioned periodic access checks
based mechanisms, which overhead is increasing as the size of the target
process grows.


Region Based Sampling
---------------------

To avoid the unbounded increase of the overhead, DAMON groups a number
of adjacent pages that assumed to have same access frequencies into a
region.  As long as the assumption (pages in a region have same access
frequencies) is kept, only one page in the region is required to be
checked.  Thus, for each ``sampling interval``, DAMON randomly picks one
page in each region and clears its Accessed bit.  After one more
``sampling interval``, DAMON reads the Accessed bit of the page and
increases the access frequency of the region if the bit has set
meanwhile.  Therefore, the monitoring overhead is controllable by
setting the number of regions.  DAMON allows users to set the minimal
and maximum number of regions for the trade-off.

Except the assumption, this is almost same with the above-mentioned
miniature-like static region based sampling.  In other words, this
scheme cannot preserve the quality of the output if the assumption is
not guaranteed.


Adaptive Regions Adjustment
---------------------------

At the beginning of the monitoring, DAMON constructs the initial regions
by evenly splitting the memory mapped address space of the process into
the user-specified minimal number of regions.  In this initial state,
the assumption is normally not kept and thus the quality could be low.
To keep the assumption as much as possible, DAMON adaptively merges and
splits each region.  For each ``aggregation interval``, it compares the
access frequencies of adjacent regions and merges those if the frequency
difference is small.  Then, after it reports and clears the aggregated
access frequency of each region, it splits each region into two regions
if the total number of regions is smaller than the half of the
user-specified maximum number of regions.

In this way, DAMON provides its best-effort quality and minimal overhead
while keeping the bounds users set for their trade-off.


Applying Dynamic Memory Mappings
--------------------------------

Only a number of small parts in the super-huge virtual address space of
the processes is mapped to physical memory and accessed.  Thus, tracking
the unmapped address regions is just wasteful.  However, tracking every
memory mapping change might incur an overhead.  For the reason, DAMON
applies the dynamic memory mapping changes to the tracking regions only
for each of an user-specified time interval (``regions update
interval``).


Evaluations
===========

A prototype of DAMON has evaluated on an Intel Xeon E7-8837 machine
using 20 benchmarks that picked from SPEC CPU 2006, NAS, Tensorflow
Benchmark, SPLASH-2X, and PARSEC 3 benchmark suite.  Nonethless, this
section provides only summary of the results.  For more detail, please
refer to the slides used for the introduction of DAMON at the Linux
Plumbers Conference 2019[1] or the MIDDLEWARE'19 industrial track
paper[2].


Quality
-------

We first traced and visualized the data access pattern of each workload.
We were able to confirm that the visualized results are reasonably
accurate by manually comparing those with the source code of the
workloads.

To see the usefulness of the monitoring, we optimized 9 memory intensive
workloads among them for memory pressure situations using the DAMON
outputs.  In detail, we identified frequently accessed memory regions in
each workload based on the DAMON results and protected them with
``mlock()`` system calls.  The optimized versions consistently show
speedup (2.55x in best case, 1.65x in average) under memory pressure
situation.


Overhead
--------

We also measured the overhead of DAMON.  It was not only under the
upperbound we set, but was much lower (0.6 percent of the bound in best
case, 13.288 percent of the bound in average).  This reduction of the
overhead is mainly resulted from the adaptive regions adjustment.  We
also compared the overhead with that of the straightforward periodic
Accessed bit check-based monitoring, which checks the access of every
page frame.  DAMON's overhead was much smaller than the straightforward
mechanism by 94,242.42x in best case, 3,159.61x in average.


References
==========

Prototypes of DAMON have introduced by an LPC kernel summit track
talk[1] and two academic papers[2,3].  Please refer to those for more
detailed information, especially the evaluations.

[1] SeongJae Park, Tracing Data Access Pattern with Bounded Overhead and
    Best-effort Accuracy. In The Linux Kernel Summit, September 2019.
    https://linuxplumbersconf.org/event/4/contributions/548/
[2] SeongJae Park, Yunjae Lee, Heon Y. Yeom, Profiling Dynamic Data
    Access Patterns with Controlled Overhead and Quality. In 20th
    ACM/IFIP International Middleware Conference Industry, December
    2019.  https://dl.acm.org/doi/10.1145/3366626.3368125
[3] SeongJae Park, Yunjae Lee, Yunhee Kim, Heon Y. Yeom, Profiling
    Dynamic Data Access Patterns with Bounded Overhead and Accuracy. In
    IEEE International Workshop on Foundations and Applications of Self-
    Systems (FAS 2019), June 2019.

SeongJae Park (8):
  mm: Introduce Data Access MONitor (DAMON)
  mm/damon: Implement region based sampling
  mm/damon: Adaptively adjust regions
  mm/damon: Apply dynamic memory mapping changes
  mm/damon: Add debugfs interface
  mm/damon: Add minimal user-space tools
  Documentation/admin-guide/mm: Add a document for DAMON
  mm/damon: Add kunit tests

 .../admin-guide/mm/data_access_monitor.rst    |  240 ++++
 Documentation/admin-guide/mm/index.rst        |    1 +
 MAINTAINERS                                   |    9 +
 mm/Kconfig                                    |   23 +
 mm/Makefile                                   |    1 +
 mm/damon-test.h                               |  571 ++++++++
 mm/damon.c                                    | 1279 +++++++++++++++++
 tools/damon/.gitignore                        |    1 +
 tools/damon/_dist.py                          |   35 +
 tools/damon/bin2txt.py                        |   64 +
 tools/damon/damo                              |   37 +
 tools/damon/heats.py                          |  358 +++++
 tools/damon/nr_regions.py                     |   88 ++
 tools/damon/record.py                         |  193 +++
 tools/damon/report.py                         |   45 +
 tools/damon/wss.py                            |   94 ++
 16 files changed, 3039 insertions(+)
 create mode 100644 Documentation/admin-guide/mm/data_access_monitor.rst
 create mode 100644 mm/damon-test.h
 create mode 100644 mm/damon.c
 create mode 100644 tools/damon/.gitignore
 create mode 100644 tools/damon/_dist.py
 create mode 100644 tools/damon/bin2txt.py
 create mode 100755 tools/damon/damo
 create mode 100644 tools/damon/heats.py
 create mode 100644 tools/damon/nr_regions.py
 create mode 100644 tools/damon/record.py
 create mode 100644 tools/damon/report.py
 create mode 100644 tools/damon/wss.py

-- 
2.17.1



^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-20 16:27 [PATCH 0/8] Introduce Data Access MONitor (DAMON) SeongJae Park
2020-01-20 16:27 ` [PATCH 1/8] mm: " SeongJae Park
2020-01-20 16:27 ` [PATCH 2/8] mm/damon: Implement region based sampling SeongJae Park
2020-01-22  8:15   ` SeongJae Park
2020-01-20 16:27 ` [PATCH 3/8] mm/damon: Adaptively adjust regions SeongJae Park
2020-01-20 16:27 ` [PATCH 4/8] mm/damon: Apply dynamic memory mapping changes SeongJae Park
2020-01-20 16:30 ` [PATCH 5/8] mm/damon: Add debugfs interface SeongJae Park
2020-01-20 16:30   ` [PATCH 6/8] mm/damon: Add minimal user-space tools SeongJae Park
2020-01-20 16:30   ` [PATCH 7/8] Documentation/admin-guide/mm: Add a document for DAMON SeongJae Park
2020-01-20 16:30   ` [PATCH 8/8] mm/damon: Add kunit tests SeongJae Park
2020-01-20 16:55 ` [PATCH 0/8] Introduce Data Access MONitor (DAMON) Kirill A. Shutemov
2020-01-20 18:14   ` SeongJae Park
2020-01-27 16:53     ` sjpark

Linux-mm Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mm/0 linux-mm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mm linux-mm/ https://lore.kernel.org/linux-mm \
		linux-mm@kvack.org
	public-inbox-index linux-mm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kvack.linux-mm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git