* [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
@ 2022-12-06 2:34 Mina Almasry
2022-12-06 3:13 ` Huang, Ying
` (3 more replies)
0 siblings, 4 replies; 24+ messages in thread
From: Mina Almasry @ 2022-12-06 2:34 UTC (permalink / raw)
To: Andrew Morton
Cc: Johannes Weiner, Michal Hocko, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
Mina Almasry, linux-mm, linux-kernel
commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
reclaim"") enabled demotion in memcg reclaim, which is the right thing
to do, however, it introduced a regression in the behavior of
try_to_free_mem_cgroup_pages().
The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
of the cgroup should reduce by nr_pages. The callers expect
try_to_free_mem_cgroup_pages() to also return the number of pages
reclaimed, not demoted.
However, what try_to_free_mem_cgroup_pages() actually does is it
unconditionally counts demoted pages as reclaimed pages. So in practice
when it is called it will often demote nr_pages and return the number of
demoted pages to the caller. Demoted pages don't lower the memcg usage,
and so try_to_free_mem_cgroup_pages() is not actually doing what the
callers want it to do.
Various things work suboptimally on memory tiered systems or don't work
at all due to this:
- memory.high enforcement likely doesn't work (it just demotes nr_pages
instead of lowering the memcg usage by nr_pages).
- try_charge_memcg() will keep retrying the charge while
try_to_free_mem_cgroup_pages() is just demoting pages and not actually
making any room for the charge.
- memory.reclaim has a wonky interface. It advertises to the user it
reclaims the provided amount but it will actually often demote that
amount.
There may be more effects to this issue.
To fix these issues I propose shrink_folio_list() to only count pages
demoted from inside of sc->nodemask to outside of sc->nodemask as
'reclaimed'.
For callers such as reclaim_high() or try_charge_memcg() that set
sc->nodemask to NULL, try_to_free_mem_cgroup_pages() will try to
actually reclaim nr_pages and return the number of pages reclaimed. No
demoted pages would count towards the nr_pages requirement.
For callers such as memory_reclaim() that set sc->nodemask,
try_to_free_mem_cgroup_pages() will free nr_pages from that nodemask
with either reclaim or demotion.
Tested this change using memory.reclaim interface. I set up a test case where
I allocate 500m in a cgroup, and then do:
echo "50m" > memory.reclaim
Without this fix, my kernel demotes 70mb and reclaims 4 mb
(memory.current is reduced by about 4mb).
With this fix, my kernel demotes all memory possible and reclaims 60mb
(memory.current is reduced by about 60mb).
Signed-off-by: Mina Almasry <almasrymina@google.com>
---
Changes in v3:
- Reverted back to v1 implementation: "try to demote but don't count
demoted pages unless they are demoted to outside the nodemask" as Ying
suggested.
- Made sure demotions that fall back to non next_demotion_target() are
not counted as Wei suggested.
- Updated comment in shrink_folio_list() as Ying suggested.
- Added before/after for the test case in commit message since Ying
asked.
- Fixed call sites that don't provide sc->nodemask but expect demotion
from a specific node as Ying pointed out.
Cc: weixugc@google.com
Cc: ying.huang@intel.com
This is developed on top of mm-unstable largely because I want the
solution to be compatible with the recently added nodes= arg on
mm-unstable.
---
mm/vmscan.c | 91 +++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 78 insertions(+), 13 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2b42ac9ad755..f324e80395c3 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1555,13 +1555,18 @@ static void folio_check_dirty_writeback(struct folio *folio,
mapping->a_ops->is_dirty_writeback(folio, dirty, writeback);
}
+struct demotion_control {
+ struct migration_target_control *mtc;
+ nodemask_t *demote_from_nodemask;
+ unsigned long nr_demoted_outside_nodemask;
+};
+
static struct page *alloc_demote_page(struct page *page, unsigned long private)
{
struct page *target_page;
nodemask_t *allowed_mask;
- struct migration_target_control *mtc;
-
- mtc = (struct migration_target_control *)private;
+ struct demotion_control *dc = (struct demotion_control *)private;
+ struct migration_target_control *mtc = dc->mtc;
allowed_mask = mtc->nmask;
/*
@@ -1576,13 +1581,31 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
mtc->nmask = NULL;
mtc->gfp_mask |= __GFP_THISNODE;
target_page = alloc_migration_target(page, (unsigned long)mtc);
- if (target_page)
+ if (!target_page) {
+ mtc->gfp_mask &= ~__GFP_THISNODE;
+ mtc->nmask = allowed_mask;
+ target_page = alloc_migration_target(page, (unsigned long)mtc);
+ }
+
+ if (!target_page)
return target_page;
- mtc->gfp_mask &= ~__GFP_THISNODE;
- mtc->nmask = allowed_mask;
+ if (dc->demote_from_nodemask &&
+ !node_isset(page_to_nid(target_page), *dc->demote_from_nodemask))
+ dc->nr_demoted_outside_nodemask++;
- return alloc_migration_target(page, (unsigned long)mtc);
+ return target_page;
+}
+
+void free_demote_page(struct page *page, unsigned long private)
+{
+ struct demotion_control *dc = (struct demotion_control *)private;
+
+ if (dc->demote_from_nodemask &&
+ !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
+ dc->nr_demoted_outside_nodemask--;
+
+ folio_put(page_folio(page));
}
/*
@@ -1590,7 +1613,8 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
* Folios which are not demoted are left on @demote_folios.
*/
static unsigned int demote_folio_list(struct list_head *demote_folios,
- struct pglist_data *pgdat)
+ struct pglist_data *pgdat,
+ nodemask_t *nodemask)
{
int target_nid = next_demotion_node(pgdat->node_id);
unsigned int nr_succeeded;
@@ -1608,6 +1632,12 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
.nmask = &allowed_mask
};
+ struct demotion_control dc = {
+ .mtc = &mtc,
+ .demote_from_nodemask = nodemask,
+ .nr_demoted_outside_nodemask = 0,
+ };
+
if (list_empty(demote_folios))
return 0;
@@ -1617,13 +1647,13 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
node_get_allowed_targets(pgdat, &allowed_mask);
/* Demotion ignores all cpuset and mempolicy settings */
- migrate_pages(demote_folios, alloc_demote_page, NULL,
- (unsigned long)&mtc, MIGRATE_ASYNC, MR_DEMOTION,
+ migrate_pages(demote_folios, alloc_demote_page, free_demote_page,
+ (unsigned long)&dc, MIGRATE_ASYNC, MR_DEMOTION,
&nr_succeeded);
__count_vm_events(PGDEMOTE_KSWAPD + reclaimer_offset(), nr_succeeded);
- return nr_succeeded;
+ return dc.nr_demoted_outside_nodemask;
}
static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
@@ -1643,7 +1673,12 @@ static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
}
/*
- * shrink_folio_list() returns the number of reclaimed pages
+ * shrink_folio_list() returns the number of reclaimed pages.
+ *
+ * Demoted pages are counted as reclaimed iff:
+ * (a) sc->nodemask arg is provided.
+ * (b) page has been demoted from a node inside sc->nodemask to a node
+ * outside sc->nodemask.
*/
static unsigned int shrink_folio_list(struct list_head *folio_list,
struct pglist_data *pgdat, struct scan_control *sc,
@@ -1653,6 +1688,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
LIST_HEAD(free_folios);
LIST_HEAD(demote_folios);
unsigned int nr_reclaimed = 0;
+ unsigned int nr_demoted_outside_nodemask = 0;
unsigned int pgactivate = 0;
bool do_demote_pass;
struct swap_iocb *plug = NULL;
@@ -2085,7 +2121,12 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
/* 'folio_list' is always empty here */
/* Migrate folios selected for demotion */
- nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
+ nr_demoted_outside_nodemask =
+ demote_folio_list(&demote_folios, pgdat, sc->nodemask);
+
+ if (sc->nodemask)
+ nr_reclaimed += nr_demoted_outside_nodemask;
+
/* Folios that could not be demoted are still in @demote_folios */
if (!list_empty(&demote_folios)) {
/* Folios which weren't demoted go back on @folio_list */
@@ -2130,9 +2171,11 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
unsigned int reclaim_clean_pages_from_list(struct zone *zone,
struct list_head *folio_list)
{
+ nodemask_t nodemask = NODE_MASK_NONE;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_unmap = 1,
+ .nodemask = &nodemask
};
struct reclaim_stat stat;
unsigned int nr_reclaimed;
@@ -2140,6 +2183,12 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
LIST_HEAD(clean_folios);
unsigned int noreclaim_flag;
+ /*
+ * Set the nodemask in sc to indicate to shrink_folio_list() that we're
+ * looking for reclaim from this node.
+ */
+ node_set(zone->zone_pgdat->node_id, nodemask);
+
list_for_each_entry_safe(folio, next, folio_list, lru) {
if (!folio_test_hugetlb(folio) && folio_is_file_lru(folio) &&
!folio_test_dirty(folio) && !__folio_test_movable(folio) &&
@@ -7031,12 +7080,20 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int highest_zoneidx)
unsigned long zone_boosts[MAX_NR_ZONES] = { 0, };
bool boosted;
struct zone *zone;
+ nodemask_t nodemask = NODE_MASK_NONE;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.order = order,
.may_unmap = 1,
+ .nodemask = &nodemask,
};
+ /*
+ * Set the nodemask in sc to indicate to kswapd_shrink_node() that we're
+ * looking for reclaim from this node.
+ */
+ node_set(pgdat->node_id, nodemask);
+
set_task_reclaim_state(current, &sc.reclaim_state);
psi_memstall_enter(&pflags);
__fs_reclaim_acquire(_THIS_IP_);
@@ -7642,6 +7699,7 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
const unsigned long nr_pages = 1 << order;
struct task_struct *p = current;
unsigned int noreclaim_flag;
+ nodemask_t nodemask = NODE_MASK_NONE;
struct scan_control sc = {
.nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
.gfp_mask = current_gfp_context(gfp_mask),
@@ -7651,9 +7709,16 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
.may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
.may_swap = 1,
.reclaim_idx = gfp_zone(gfp_mask),
+ .nodemask = &nodemask,
};
unsigned long pflags;
+ /*
+ * Set the nodemask in sc to indicate to shrink_node() that we're
+ * looking for reclaim from this node.
+ */
+ node_set(pgdat->node_id, nodemask);
+
trace_mm_vmscan_node_reclaim_begin(pgdat->node_id, order,
sc.gfp_mask);
--
2.39.0.rc0.267.gcb52ba06e7-goog
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 2:34 [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems Mina Almasry
@ 2022-12-06 3:13 ` Huang, Ying
2022-12-06 4:15 ` Mina Almasry
2022-12-06 12:20 ` Michal Hocko
` (2 subsequent siblings)
3 siblings, 1 reply; 24+ messages in thread
From: Huang, Ying @ 2022-12-06 3:13 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Michal Hocko, Roman Gushchin,
Shakeel Butt, Muchun Song, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel, David Rientjes
Mina Almasry <almasrymina@google.com> writes:
> commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> reclaim"") enabled demotion in memcg reclaim, which is the right thing
> to do, however, it introduced a regression in the behavior of
> try_to_free_mem_cgroup_pages().
>
> The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> of the cgroup should reduce by nr_pages. The callers expect
> try_to_free_mem_cgroup_pages() to also return the number of pages
> reclaimed, not demoted.
>
> However, what try_to_free_mem_cgroup_pages() actually does is it
> unconditionally counts demoted pages as reclaimed pages. So in practnice
> when it is called it will often demote nr_pages and return the number of
> demoted pages to the caller. Demoted pages don't lower the memcg usage,
> and so try_to_free_mem_cgroup_pages() is not actually doing what the
> callers want it to do.
>
> Various things work suboptimally on memory tiered systems or don't work
> at all due to this:
>
> - memory.high enforcement likely doesn't work (it just demotes nr_pages
> instead of lowering the memcg usage by nr_pages).
> - try_charge_memcg() will keep retrying the charge while
> try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> making any room for the charge.
> - memory.reclaim has a wonky interface. It advertises to the user it
> reclaims the provided amount but it will actually often demote that
> amount.
>
> There may be more effects to this issue.
>
> To fix these issues I propose shrink_folio_list() to only count pages
> demoted from inside of sc->nodemask to outside of sc->nodemask as
> 'reclaimed'.
>
> For callers such as reclaim_high() or try_charge_memcg() that set
> sc->nodemask to NULL, try_to_free_mem_cgroup_pages() will try to
> actually reclaim nr_pages and return the number of pages reclaimed. No
> demoted pages would count towards the nr_pages requirement.
>
> For callers such as memory_reclaim() that set sc->nodemask,
> try_to_free_mem_cgroup_pages() will free nr_pages from that nodemask
> with either reclaim or demotion.
>
> Tested this change using memory.reclaim interface. I set up a test case where
> I allocate 500m in a cgroup, and then do:
>
> echo "50m" > memory.reclaim
>
> Without this fix, my kernel demotes 70mb and reclaims 4 mb
> (memory.current is reduced by about 4mb).
>
> With this fix, my kernel demotes all memory possible and reclaims 60mb
> (memory.current is reduced by about 60mb).
>
> Signed-off-by: Mina Almasry <almasrymina@google.com>
>
> ---
>
> Changes in v3:
> - Reverted back to v1 implementation: "try to demote but don't count
> demoted pages unless they are demoted to outside the nodemask" as Ying
> suggested.
> - Made sure demotions that fall back to non next_demotion_target() are
> not counted as Wei suggested.
> - Updated comment in shrink_folio_list() as Ying suggested.
> - Added before/after for the test case in commit message since Ying
> asked.
> - Fixed call sites that don't provide sc->nodemask but expect demotion
> from a specific node as Ying pointed out.
>
> Cc: weixugc@google.com
> Cc: ying.huang@intel.com
>
> This is developed on top of mm-unstable largely because I want the
> solution to be compatible with the recently added nodes= arg on
> mm-unstable.
> ---
> mm/vmscan.c | 91 +++++++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 78 insertions(+), 13 deletions(-)
>
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 2b42ac9ad755..f324e80395c3 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -1555,13 +1555,18 @@ static void folio_check_dirty_writeback(struct folio *folio,
> mapping->a_ops->is_dirty_writeback(folio, dirty, writeback);
> }
>
> +struct demotion_control {
> + struct migration_target_control *mtc;
> + nodemask_t *demote_from_nodemask;
> + unsigned long nr_demoted_outside_nodemask;
> +};
> +
> static struct page *alloc_demote_page(struct page *page, unsigned long private)
> {
> struct page *target_page;
> nodemask_t *allowed_mask;
> - struct migration_target_control *mtc;
> -
> - mtc = (struct migration_target_control *)private;
> + struct demotion_control *dc = (struct demotion_control *)private;
> + struct migration_target_control *mtc = dc->mtc;
>
> allowed_mask = mtc->nmask;
> /*
> @@ -1576,13 +1581,31 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
> mtc->nmask = NULL;
> mtc->gfp_mask |= __GFP_THISNODE;
> target_page = alloc_migration_target(page, (unsigned long)mtc);
> - if (target_page)
> + if (!target_page) {
> + mtc->gfp_mask &= ~__GFP_THISNODE;
> + mtc->nmask = allowed_mask;
> + target_page = alloc_migration_target(page, (unsigned long)mtc);
> + }
> +
> + if (!target_page)
> return target_page;
>
> - mtc->gfp_mask &= ~__GFP_THISNODE;
> - mtc->nmask = allowed_mask;
> + if (dc->demote_from_nodemask &&
> + !node_isset(page_to_nid(target_page), *dc->demote_from_nodemask))
Use mtc->nid directly?
> + dc->nr_demoted_outside_nodemask++;
>
> - return alloc_migration_target(page, (unsigned long)mtc);
> + return target_page;
> +}
> +
> +void free_demote_page(struct page *page, unsigned long private)
> +{
> + struct demotion_control *dc = (struct demotion_control *)private;
> +
> + if (dc->demote_from_nodemask &&
> + !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
ditto
> + dc->nr_demoted_outside_nodemask--;
> +
> + folio_put(page_folio(page));
> }
>
> /*
> @@ -1590,7 +1613,8 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
> * Folios which are not demoted are left on @demote_folios.
> */
> static unsigned int demote_folio_list(struct list_head *demote_folios,
> - struct pglist_data *pgdat)
> + struct pglist_data *pgdat,
> + nodemask_t *nodemask)
> {
> int target_nid = next_demotion_node(pgdat->node_id);
> unsigned int nr_succeeded;
> @@ -1608,6 +1632,12 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
> .nmask = &allowed_mask
> };
>
> + struct demotion_control dc = {
> + .mtc = &mtc,
> + .demote_from_nodemask = nodemask,
> + .nr_demoted_outside_nodemask = 0,
> + };
> +
> if (list_empty(demote_folios))
> return 0;
>
> @@ -1617,13 +1647,13 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
> node_get_allowed_targets(pgdat, &allowed_mask);
>
> /* Demotion ignores all cpuset and mempolicy settings */
> - migrate_pages(demote_folios, alloc_demote_page, NULL,
> - (unsigned long)&mtc, MIGRATE_ASYNC, MR_DEMOTION,
> + migrate_pages(demote_folios, alloc_demote_page, free_demote_page,
> + (unsigned long)&dc, MIGRATE_ASYNC, MR_DEMOTION,
> &nr_succeeded);
>
> __count_vm_events(PGDEMOTE_KSWAPD + reclaimer_offset(), nr_succeeded);
>
> - return nr_succeeded;
> + return dc.nr_demoted_outside_nodemask;
> }
>
> static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
> @@ -1643,7 +1673,12 @@ static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
> }
>
> /*
> - * shrink_folio_list() returns the number of reclaimed pages
> + * shrink_folio_list() returns the number of reclaimed pages.
> + *
> + * Demoted pages are counted as reclaimed iff:
> + * (a) sc->nodemask arg is provided.
> + * (b) page has been demoted from a node inside sc->nodemask to a node
> + * outside sc->nodemask.
> */
> static unsigned int shrink_folio_list(struct list_head *folio_list,
> struct pglist_data *pgdat, struct scan_control *sc,
> @@ -1653,6 +1688,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> LIST_HEAD(free_folios);
> LIST_HEAD(demote_folios);
> unsigned int nr_reclaimed = 0;
> + unsigned int nr_demoted_outside_nodemask = 0;
> unsigned int pgactivate = 0;
> bool do_demote_pass;
> struct swap_iocb *plug = NULL;
> @@ -2085,7 +2121,12 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> /* 'folio_list' is always empty here */
>
> /* Migrate folios selected for demotion */
> - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> + nr_demoted_outside_nodemask =
> + demote_folio_list(&demote_folios, pgdat, sc->nodemask);
> +
> + if (sc->nodemask)
> + nr_reclaimed += nr_demoted_outside_nodemask;
> +
> /* Folios that could not be demoted are still in @demote_folios */
> if (!list_empty(&demote_folios)) {
> /* Folios which weren't demoted go back on @folio_list */
> @@ -2130,9 +2171,11 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> unsigned int reclaim_clean_pages_from_list(struct zone *zone,
> struct list_head *folio_list)
> {
> + nodemask_t nodemask = NODE_MASK_NONE;
Is it necessary for us to use NODEMASK_ALLOC/NODEMASK_FREE to save stack space?
Best Regards,
Huang, Ying
> struct scan_control sc = {
> .gfp_mask = GFP_KERNEL,
> .may_unmap = 1,
> + .nodemask = &nodemask
> };
> struct reclaim_stat stat;
> unsigned int nr_reclaimed;
> @@ -2140,6 +2183,12 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
> LIST_HEAD(clean_folios);
> unsigned int noreclaim_flag;
>
> + /*
> + * Set the nodemask in sc to indicate to shrink_folio_list() that we're
> + * looking for reclaim from this node.
> + */
> + node_set(zone->zone_pgdat->node_id, nodemask);
> +
> list_for_each_entry_safe(folio, next, folio_list, lru) {
> if (!folio_test_hugetlb(folio) && folio_is_file_lru(folio) &&
> !folio_test_dirty(folio) && !__folio_test_movable(folio) &&
> @@ -7031,12 +7080,20 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int highest_zoneidx)
> unsigned long zone_boosts[MAX_NR_ZONES] = { 0, };
> bool boosted;
> struct zone *zone;
> + nodemask_t nodemask = NODE_MASK_NONE;
> struct scan_control sc = {
> .gfp_mask = GFP_KERNEL,
> .order = order,
> .may_unmap = 1,
> + .nodemask = &nodemask,
> };
>
> + /*
> + * Set the nodemask in sc to indicate to kswapd_shrink_node() that we're
> + * looking for reclaim from this node.
> + */
> + node_set(pgdat->node_id, nodemask);
> +
> set_task_reclaim_state(current, &sc.reclaim_state);
> psi_memstall_enter(&pflags);
> __fs_reclaim_acquire(_THIS_IP_);
> @@ -7642,6 +7699,7 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
> const unsigned long nr_pages = 1 << order;
> struct task_struct *p = current;
> unsigned int noreclaim_flag;
> + nodemask_t nodemask = NODE_MASK_NONE;
> struct scan_control sc = {
> .nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
> .gfp_mask = current_gfp_context(gfp_mask),
> @@ -7651,9 +7709,16 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
> .may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
> .may_swap = 1,
> .reclaim_idx = gfp_zone(gfp_mask),
> + .nodemask = &nodemask,
> };
> unsigned long pflags;
>
> + /*
> + * Set the nodemask in sc to indicate to shrink_node() that we're
> + * looking for reclaim from this node.
> + */
> + node_set(pgdat->node_id, nodemask);
> +
> trace_mm_vmscan_node_reclaim_begin(pgdat->node_id, order,
> sc.gfp_mask);
>
> --
> 2.39.0.rc0.267.gcb52ba06e7-goog
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 3:13 ` Huang, Ying
@ 2022-12-06 4:15 ` Mina Almasry
2022-12-06 5:22 ` Huang, Ying
0 siblings, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-06 4:15 UTC (permalink / raw)
To: Huang, Ying
Cc: Andrew Morton, Johannes Weiner, Michal Hocko, Roman Gushchin,
Shakeel Butt, Muchun Song, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel, David Rientjes
On Mon, Dec 5, 2022 at 7:14 PM Huang, Ying <ying.huang@intel.com> wrote:
>
> Mina Almasry <almasrymina@google.com> writes:
>
> > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > to do, however, it introduced a regression in the behavior of
> > try_to_free_mem_cgroup_pages().
> >
> > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > of the cgroup should reduce by nr_pages. The callers expect
> > try_to_free_mem_cgroup_pages() to also return the number of pages
> > reclaimed, not demoted.
> >
> > However, what try_to_free_mem_cgroup_pages() actually does is it
> > unconditionally counts demoted pages as reclaimed pages. So in practnice
> > when it is called it will often demote nr_pages and return the number of
> > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > callers want it to do.
> >
> > Various things work suboptimally on memory tiered systems or don't work
> > at all due to this:
> >
> > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > instead of lowering the memcg usage by nr_pages).
> > - try_charge_memcg() will keep retrying the charge while
> > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > making any room for the charge.
> > - memory.reclaim has a wonky interface. It advertises to the user it
> > reclaims the provided amount but it will actually often demote that
> > amount.
> >
> > There may be more effects to this issue.
> >
> > To fix these issues I propose shrink_folio_list() to only count pages
> > demoted from inside of sc->nodemask to outside of sc->nodemask as
> > 'reclaimed'.
> >
> > For callers such as reclaim_high() or try_charge_memcg() that set
> > sc->nodemask to NULL, try_to_free_mem_cgroup_pages() will try to
> > actually reclaim nr_pages and return the number of pages reclaimed. No
> > demoted pages would count towards the nr_pages requirement.
> >
> > For callers such as memory_reclaim() that set sc->nodemask,
> > try_to_free_mem_cgroup_pages() will free nr_pages from that nodemask
> > with either reclaim or demotion.
> >
> > Tested this change using memory.reclaim interface. I set up a test case where
> > I allocate 500m in a cgroup, and then do:
> >
> > echo "50m" > memory.reclaim
> >
> > Without this fix, my kernel demotes 70mb and reclaims 4 mb
> > (memory.current is reduced by about 4mb).
> >
> > With this fix, my kernel demotes all memory possible and reclaims 60mb
> > (memory.current is reduced by about 60mb).
> >
> > Signed-off-by: Mina Almasry <almasrymina@google.com>
> >
> > ---
> >
> > Changes in v3:
> > - Reverted back to v1 implementation: "try to demote but don't count
> > demoted pages unless they are demoted to outside the nodemask" as Ying
> > suggested.
> > - Made sure demotions that fall back to non next_demotion_target() are
> > not counted as Wei suggested.
> > - Updated comment in shrink_folio_list() as Ying suggested.
> > - Added before/after for the test case in commit message since Ying
> > asked.
> > - Fixed call sites that don't provide sc->nodemask but expect demotion
> > from a specific node as Ying pointed out.
> >
> > Cc: weixugc@google.com
> > Cc: ying.huang@intel.com
> >
> > This is developed on top of mm-unstable largely because I want the
> > solution to be compatible with the recently added nodes= arg on
> > mm-unstable.
> > ---
> > mm/vmscan.c | 91 +++++++++++++++++++++++++++++++++++++++++++++--------
> > 1 file changed, 78 insertions(+), 13 deletions(-)
> >
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 2b42ac9ad755..f324e80395c3 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -1555,13 +1555,18 @@ static void folio_check_dirty_writeback(struct folio *folio,
> > mapping->a_ops->is_dirty_writeback(folio, dirty, writeback);
> > }
> >
> > +struct demotion_control {
> > + struct migration_target_control *mtc;
> > + nodemask_t *demote_from_nodemask;
> > + unsigned long nr_demoted_outside_nodemask;
> > +};
> > +
> > static struct page *alloc_demote_page(struct page *page, unsigned long private)
> > {
> > struct page *target_page;
> > nodemask_t *allowed_mask;
> > - struct migration_target_control *mtc;
> > -
> > - mtc = (struct migration_target_control *)private;
> > + struct demotion_control *dc = (struct demotion_control *)private;
> > + struct migration_target_control *mtc = dc->mtc;
> >
> > allowed_mask = mtc->nmask;
> > /*
> > @@ -1576,13 +1581,31 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
> > mtc->nmask = NULL;
> > mtc->gfp_mask |= __GFP_THISNODE;
> > target_page = alloc_migration_target(page, (unsigned long)mtc);
> > - if (target_page)
> > + if (!target_page) {
> > + mtc->gfp_mask &= ~__GFP_THISNODE;
> > + mtc->nmask = allowed_mask;
> > + target_page = alloc_migration_target(page, (unsigned long)mtc);
> > + }
> > +
> > + if (!target_page)
> > return target_page;
> >
> > - mtc->gfp_mask &= ~__GFP_THISNODE;
> > - mtc->nmask = allowed_mask;
> > + if (dc->demote_from_nodemask &&
> > + !node_isset(page_to_nid(target_page), *dc->demote_from_nodemask))
>
> Use mtc->nid directly?
>
mtc->nid is the next_demotion_node(). Wei's earlier comment is that
the page may be allocated anywhere on the get_allowed_targets(), not
necessarily the next_demotion_node(), so I don't think I can use
mtc->nid. I think I have to check on which node the page was allocated
as I'm doing here. Let me know if I missed something.
> > + dc->nr_demoted_outside_nodemask++;
> >
> > - return alloc_migration_target(page, (unsigned long)mtc);
> > + return target_page;
> > +}
> > +
> > +void free_demote_page(struct page *page, unsigned long private)
> > +{
> > + struct demotion_control *dc = (struct demotion_control *)private;
> > +
> > + if (dc->demote_from_nodemask &&
> > + !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
>
> ditto
>
> > + dc->nr_demoted_outside_nodemask--;
> > +
> > + folio_put(page_folio(page));
> > }
> >
> > /*
> > @@ -1590,7 +1613,8 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
> > * Folios which are not demoted are left on @demote_folios.
> > */
> > static unsigned int demote_folio_list(struct list_head *demote_folios,
> > - struct pglist_data *pgdat)
> > + struct pglist_data *pgdat,
> > + nodemask_t *nodemask)
> > {
> > int target_nid = next_demotion_node(pgdat->node_id);
> > unsigned int nr_succeeded;
> > @@ -1608,6 +1632,12 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
> > .nmask = &allowed_mask
> > };
> >
> > + struct demotion_control dc = {
> > + .mtc = &mtc,
> > + .demote_from_nodemask = nodemask,
> > + .nr_demoted_outside_nodemask = 0,
> > + };
> > +
> > if (list_empty(demote_folios))
> > return 0;
> >
> > @@ -1617,13 +1647,13 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
> > node_get_allowed_targets(pgdat, &allowed_mask);
> >
> > /* Demotion ignores all cpuset and mempolicy settings */
> > - migrate_pages(demote_folios, alloc_demote_page, NULL,
> > - (unsigned long)&mtc, MIGRATE_ASYNC, MR_DEMOTION,
> > + migrate_pages(demote_folios, alloc_demote_page, free_demote_page,
> > + (unsigned long)&dc, MIGRATE_ASYNC, MR_DEMOTION,
> > &nr_succeeded);
> >
> > __count_vm_events(PGDEMOTE_KSWAPD + reclaimer_offset(), nr_succeeded);
> >
> > - return nr_succeeded;
> > + return dc.nr_demoted_outside_nodemask;
> > }
> >
> > static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
> > @@ -1643,7 +1673,12 @@ static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
> > }
> >
> > /*
> > - * shrink_folio_list() returns the number of reclaimed pages
> > + * shrink_folio_list() returns the number of reclaimed pages.
> > + *
> > + * Demoted pages are counted as reclaimed iff:
> > + * (a) sc->nodemask arg is provided.
> > + * (b) page has been demoted from a node inside sc->nodemask to a node
> > + * outside sc->nodemask.
> > */
> > static unsigned int shrink_folio_list(struct list_head *folio_list,
> > struct pglist_data *pgdat, struct scan_control *sc,
> > @@ -1653,6 +1688,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > LIST_HEAD(free_folios);
> > LIST_HEAD(demote_folios);
> > unsigned int nr_reclaimed = 0;
> > + unsigned int nr_demoted_outside_nodemask = 0;
> > unsigned int pgactivate = 0;
> > bool do_demote_pass;
> > struct swap_iocb *plug = NULL;
> > @@ -2085,7 +2121,12 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > /* 'folio_list' is always empty here */
> >
> > /* Migrate folios selected for demotion */
> > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> > + nr_demoted_outside_nodemask =
> > + demote_folio_list(&demote_folios, pgdat, sc->nodemask);
> > +
> > + if (sc->nodemask)
> > + nr_reclaimed += nr_demoted_outside_nodemask;
> > +
> > /* Folios that could not be demoted are still in @demote_folios */
> > if (!list_empty(&demote_folios)) {
> > /* Folios which weren't demoted go back on @folio_list */
> > @@ -2130,9 +2171,11 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > unsigned int reclaim_clean_pages_from_list(struct zone *zone,
> > struct list_head *folio_list)
> > {
> > + nodemask_t nodemask = NODE_MASK_NONE;
>
> Is it necessary for us to use NODEMASK_ALLOC/NODEMASK_FREE to save stack space?
>
I can certainly use NODEMASK_ALLOC/NODEMASK_FREE if you'd like. I
think there are a few places that stack allocate nodemask_t already,
including one place I recently added in memory_reclaim(), so it
doesn't seem _necessary_ per say.
If you're asking my opinion, AFAICT it's not an issue. I think you
need > 32 numa nodes before nodemask_t becomes an array of size 2
longs on a 32-bit machine, and even then I think it's not a huge deal.
Up to you; I have no issue with converting to
NODEMASK_ALLOC/NODEMASK_FREE in v4.
> Best Regards,
> Huang, Ying
>
> > struct scan_control sc = {
> > .gfp_mask = GFP_KERNEL,
> > .may_unmap = 1,
> > + .nodemask = &nodemask
> > };
> > struct reclaim_stat stat;
> > unsigned int nr_reclaimed;
> > @@ -2140,6 +2183,12 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
> > LIST_HEAD(clean_folios);
> > unsigned int noreclaim_flag;
> >
> > + /*
> > + * Set the nodemask in sc to indicate to shrink_folio_list() that we're
> > + * looking for reclaim from this node.
> > + */
> > + node_set(zone->zone_pgdat->node_id, nodemask);
> > +
> > list_for_each_entry_safe(folio, next, folio_list, lru) {
> > if (!folio_test_hugetlb(folio) && folio_is_file_lru(folio) &&
> > !folio_test_dirty(folio) && !__folio_test_movable(folio) &&
> > @@ -7031,12 +7080,20 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int highest_zoneidx)
> > unsigned long zone_boosts[MAX_NR_ZONES] = { 0, };
> > bool boosted;
> > struct zone *zone;
> > + nodemask_t nodemask = NODE_MASK_NONE;
> > struct scan_control sc = {
> > .gfp_mask = GFP_KERNEL,
> > .order = order,
> > .may_unmap = 1,
> > + .nodemask = &nodemask,
> > };
> >
> > + /*
> > + * Set the nodemask in sc to indicate to kswapd_shrink_node() that we're
> > + * looking for reclaim from this node.
> > + */
> > + node_set(pgdat->node_id, nodemask);
> > +
> > set_task_reclaim_state(current, &sc.reclaim_state);
> > psi_memstall_enter(&pflags);
> > __fs_reclaim_acquire(_THIS_IP_);
> > @@ -7642,6 +7699,7 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
> > const unsigned long nr_pages = 1 << order;
> > struct task_struct *p = current;
> > unsigned int noreclaim_flag;
> > + nodemask_t nodemask = NODE_MASK_NONE;
> > struct scan_control sc = {
> > .nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
> > .gfp_mask = current_gfp_context(gfp_mask),
> > @@ -7651,9 +7709,16 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
> > .may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
> > .may_swap = 1,
> > .reclaim_idx = gfp_zone(gfp_mask),
> > + .nodemask = &nodemask,
> > };
> > unsigned long pflags;
> >
> > + /*
> > + * Set the nodemask in sc to indicate to shrink_node() that we're
> > + * looking for reclaim from this node.
> > + */
> > + node_set(pgdat->node_id, nodemask);
> > +
> > trace_mm_vmscan_node_reclaim_begin(pgdat->node_id, order,
> > sc.gfp_mask);
> >
> > --
> > 2.39.0.rc0.267.gcb52ba06e7-goog
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 4:15 ` Mina Almasry
@ 2022-12-06 5:22 ` Huang, Ying
0 siblings, 0 replies; 24+ messages in thread
From: Huang, Ying @ 2022-12-06 5:22 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Michal Hocko, Roman Gushchin,
Shakeel Butt, Muchun Song, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel, David Rientjes
Mina Almasry <almasrymina@google.com> writes:
> On Mon, Dec 5, 2022 at 7:14 PM Huang, Ying <ying.huang@intel.com> wrote:
>>
>> Mina Almasry <almasrymina@google.com> writes:
>>
>> > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
>> > reclaim"") enabled demotion in memcg reclaim, which is the right thing
>> > to do, however, it introduced a regression in the behavior of
>> > try_to_free_mem_cgroup_pages().
>> >
>> > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
>> > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
>> > of the cgroup should reduce by nr_pages. The callers expect
>> > try_to_free_mem_cgroup_pages() to also return the number of pages
>> > reclaimed, not demoted.
>> >
>> > However, what try_to_free_mem_cgroup_pages() actually does is it
>> > unconditionally counts demoted pages as reclaimed pages. So in practnice
>> > when it is called it will often demote nr_pages and return the number of
>> > demoted pages to the caller. Demoted pages don't lower the memcg usage,
>> > and so try_to_free_mem_cgroup_pages() is not actually doing what the
>> > callers want it to do.
>> >
>> > Various things work suboptimally on memory tiered systems or don't work
>> > at all due to this:
>> >
>> > - memory.high enforcement likely doesn't work (it just demotes nr_pages
>> > instead of lowering the memcg usage by nr_pages).
>> > - try_charge_memcg() will keep retrying the charge while
>> > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
>> > making any room for the charge.
>> > - memory.reclaim has a wonky interface. It advertises to the user it
>> > reclaims the provided amount but it will actually often demote that
>> > amount.
>> >
>> > There may be more effects to this issue.
>> >
>> > To fix these issues I propose shrink_folio_list() to only count pages
>> > demoted from inside of sc->nodemask to outside of sc->nodemask as
>> > 'reclaimed'.
>> >
>> > For callers such as reclaim_high() or try_charge_memcg() that set
>> > sc->nodemask to NULL, try_to_free_mem_cgroup_pages() will try to
>> > actually reclaim nr_pages and return the number of pages reclaimed. No
>> > demoted pages would count towards the nr_pages requirement.
>> >
>> > For callers such as memory_reclaim() that set sc->nodemask,
>> > try_to_free_mem_cgroup_pages() will free nr_pages from that nodemask
>> > with either reclaim or demotion.
>> >
>> > Tested this change using memory.reclaim interface. I set up a test case where
>> > I allocate 500m in a cgroup, and then do:
>> >
>> > echo "50m" > memory.reclaim
>> >
>> > Without this fix, my kernel demotes 70mb and reclaims 4 mb
>> > (memory.current is reduced by about 4mb).
>> >
>> > With this fix, my kernel demotes all memory possible and reclaims 60mb
>> > (memory.current is reduced by about 60mb).
>> >
>> > Signed-off-by: Mina Almasry <almasrymina@google.com>
>> >
>> > ---
>> >
>> > Changes in v3:
>> > - Reverted back to v1 implementation: "try to demote but don't count
>> > demoted pages unless they are demoted to outside the nodemask" as Ying
>> > suggested.
>> > - Made sure demotions that fall back to non next_demotion_target() are
>> > not counted as Wei suggested.
>> > - Updated comment in shrink_folio_list() as Ying suggested.
>> > - Added before/after for the test case in commit message since Ying
>> > asked.
>> > - Fixed call sites that don't provide sc->nodemask but expect demotion
>> > from a specific node as Ying pointed out.
>> >
>> > Cc: weixugc@google.com
>> > Cc: ying.huang@intel.com
>> >
>> > This is developed on top of mm-unstable largely because I want the
>> > solution to be compatible with the recently added nodes= arg on
>> > mm-unstable.
>> > ---
>> > mm/vmscan.c | 91 +++++++++++++++++++++++++++++++++++++++++++++--------
>> > 1 file changed, 78 insertions(+), 13 deletions(-)
>> >
>> > diff --git a/mm/vmscan.c b/mm/vmscan.c
>> > index 2b42ac9ad755..f324e80395c3 100644
>> > --- a/mm/vmscan.c
>> > +++ b/mm/vmscan.c
>> > @@ -1555,13 +1555,18 @@ static void folio_check_dirty_writeback(struct folio *folio,
>> > mapping->a_ops->is_dirty_writeback(folio, dirty, writeback);
>> > }
>> >
>> > +struct demotion_control {
>> > + struct migration_target_control *mtc;
>> > + nodemask_t *demote_from_nodemask;
>> > + unsigned long nr_demoted_outside_nodemask;
>> > +};
>> > +
>> > static struct page *alloc_demote_page(struct page *page, unsigned long private)
>> > {
>> > struct page *target_page;
>> > nodemask_t *allowed_mask;
>> > - struct migration_target_control *mtc;
>> > -
>> > - mtc = (struct migration_target_control *)private;
>> > + struct demotion_control *dc = (struct demotion_control *)private;
>> > + struct migration_target_control *mtc = dc->mtc;
>> >
>> > allowed_mask = mtc->nmask;
>> > /*
>> > @@ -1576,13 +1581,31 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
>> > mtc->nmask = NULL;
>> > mtc->gfp_mask |= __GFP_THISNODE;
>> > target_page = alloc_migration_target(page, (unsigned long)mtc);
>> > - if (target_page)
>> > + if (!target_page) {
>> > + mtc->gfp_mask &= ~__GFP_THISNODE;
>> > + mtc->nmask = allowed_mask;
>> > + target_page = alloc_migration_target(page, (unsigned long)mtc);
>> > + }
>> > +
>> > + if (!target_page)
>> > return target_page;
>> >
>> > - mtc->gfp_mask &= ~__GFP_THISNODE;
>> > - mtc->nmask = allowed_mask;
>> > + if (dc->demote_from_nodemask &&
>> > + !node_isset(page_to_nid(target_page), *dc->demote_from_nodemask))
>>
>> Use mtc->nid directly?
>>
>
> mtc->nid is the next_demotion_node(). Wei's earlier comment is that
> the page may be allocated anywhere on the get_allowed_targets(), not
> necessarily the next_demotion_node(), so I don't think I can use
> mtc->nid. I think I have to check on which node the page was allocated
> as I'm doing here. Let me know if I missed something.
Yes. You are right.
>> > + dc->nr_demoted_outside_nodemask++;
>> >
>> > - return alloc_migration_target(page, (unsigned long)mtc);
>> > + return target_page;
>> > +}
>> > +
>> > +void free_demote_page(struct page *page, unsigned long private)
>> > +{
>> > + struct demotion_control *dc = (struct demotion_control *)private;
>> > +
>> > + if (dc->demote_from_nodemask &&
>> > + !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
>>
>> ditto
>>
>> > + dc->nr_demoted_outside_nodemask--;
>> > +
>> > + folio_put(page_folio(page));
>> > }
>> >
>> > /*
>> > @@ -1590,7 +1613,8 @@ static struct page *alloc_demote_page(struct page *page, unsigned long private)
>> > * Folios which are not demoted are left on @demote_folios.
>> > */
>> > static unsigned int demote_folio_list(struct list_head *demote_folios,
>> > - struct pglist_data *pgdat)
>> > + struct pglist_data *pgdat,
>> > + nodemask_t *nodemask)
>> > {
>> > int target_nid = next_demotion_node(pgdat->node_id);
>> > unsigned int nr_succeeded;
>> > @@ -1608,6 +1632,12 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
>> > .nmask = &allowed_mask
>> > };
>> >
>> > + struct demotion_control dc = {
>> > + .mtc = &mtc,
>> > + .demote_from_nodemask = nodemask,
>> > + .nr_demoted_outside_nodemask = 0,
>> > + };
>> > +
>> > if (list_empty(demote_folios))
>> > return 0;
>> >
>> > @@ -1617,13 +1647,13 @@ static unsigned int demote_folio_list(struct list_head *demote_folios,
>> > node_get_allowed_targets(pgdat, &allowed_mask);
>> >
>> > /* Demotion ignores all cpuset and mempolicy settings */
>> > - migrate_pages(demote_folios, alloc_demote_page, NULL,
>> > - (unsigned long)&mtc, MIGRATE_ASYNC, MR_DEMOTION,
>> > + migrate_pages(demote_folios, alloc_demote_page, free_demote_page,
>> > + (unsigned long)&dc, MIGRATE_ASYNC, MR_DEMOTION,
>> > &nr_succeeded);
>> >
>> > __count_vm_events(PGDEMOTE_KSWAPD + reclaimer_offset(), nr_succeeded);
>> >
>> > - return nr_succeeded;
>> > + return dc.nr_demoted_outside_nodemask;
>> > }
>> >
>> > static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
>> > @@ -1643,7 +1673,12 @@ static bool may_enter_fs(struct folio *folio, gfp_t gfp_mask)
>> > }
>> >
>> > /*
>> > - * shrink_folio_list() returns the number of reclaimed pages
>> > + * shrink_folio_list() returns the number of reclaimed pages.
>> > + *
>> > + * Demoted pages are counted as reclaimed iff:
>> > + * (a) sc->nodemask arg is provided.
>> > + * (b) page has been demoted from a node inside sc->nodemask to a node
>> > + * outside sc->nodemask.
>> > */
>> > static unsigned int shrink_folio_list(struct list_head *folio_list,
>> > struct pglist_data *pgdat, struct scan_control *sc,
>> > @@ -1653,6 +1688,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
>> > LIST_HEAD(free_folios);
>> > LIST_HEAD(demote_folios);
>> > unsigned int nr_reclaimed = 0;
>> > + unsigned int nr_demoted_outside_nodemask = 0;
>> > unsigned int pgactivate = 0;
>> > bool do_demote_pass;
>> > struct swap_iocb *plug = NULL;
>> > @@ -2085,7 +2121,12 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
>> > /* 'folio_list' is always empty here */
>> >
>> > /* Migrate folios selected for demotion */
>> > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
>> > + nr_demoted_outside_nodemask =
>> > + demote_folio_list(&demote_folios, pgdat, sc->nodemask);
>> > +
>> > + if (sc->nodemask)
>> > + nr_reclaimed += nr_demoted_outside_nodemask;
>> > +
>> > /* Folios that could not be demoted are still in @demote_folios */
>> > if (!list_empty(&demote_folios)) {
>> > /* Folios which weren't demoted go back on @folio_list */
>> > @@ -2130,9 +2171,11 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
>> > unsigned int reclaim_clean_pages_from_list(struct zone *zone,
>> > struct list_head *folio_list)
>> > {
>> > + nodemask_t nodemask = NODE_MASK_NONE;
>>
>> Is it necessary for us to use NODEMASK_ALLOC/NODEMASK_FREE to save stack space?
>>
>
> I can certainly use NODEMASK_ALLOC/NODEMASK_FREE if you'd like. I
> think there are a few places that stack allocate nodemask_t already,
> including one place I recently added in memory_reclaim(), so it
> doesn't seem _necessary_ per say.
>
> If you're asking my opinion, AFAICT it's not an issue. I think you
> need > 32 numa nodes before nodemask_t becomes an array of size 2
> longs on a 32-bit machine, and even then I think it's not a huge deal.
> Up to you; I have no issue with converting to
> NODEMASK_ALLOC/NODEMASK_FREE in v4.
Both are OK for me. Want to know David Rientjes's idea here.
Best Regards,
Huang, Ying
>>
>> > struct scan_control sc = {
>> > .gfp_mask = GFP_KERNEL,
>> > .may_unmap = 1,
>> > + .nodemask = &nodemask
>> > };
>> > struct reclaim_stat stat;
>> > unsigned int nr_reclaimed;
>> > @@ -2140,6 +2183,12 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
>> > LIST_HEAD(clean_folios);
>> > unsigned int noreclaim_flag;
>> >
>> > + /*
>> > + * Set the nodemask in sc to indicate to shrink_folio_list() that we're
>> > + * looking for reclaim from this node.
>> > + */
>> > + node_set(zone->zone_pgdat->node_id, nodemask);
>> > +
>> > list_for_each_entry_safe(folio, next, folio_list, lru) {
>> > if (!folio_test_hugetlb(folio) && folio_is_file_lru(folio) &&
>> > !folio_test_dirty(folio) && !__folio_test_movable(folio) &&
>> > @@ -7031,12 +7080,20 @@ static int balance_pgdat(pg_data_t *pgdat, int order, int highest_zoneidx)
>> > unsigned long zone_boosts[MAX_NR_ZONES] = { 0, };
>> > bool boosted;
>> > struct zone *zone;
>> > + nodemask_t nodemask = NODE_MASK_NONE;
>> > struct scan_control sc = {
>> > .gfp_mask = GFP_KERNEL,
>> > .order = order,
>> > .may_unmap = 1,
>> > + .nodemask = &nodemask,
>> > };
>> >
>> > + /*
>> > + * Set the nodemask in sc to indicate to kswapd_shrink_node() that we're
>> > + * looking for reclaim from this node.
>> > + */
>> > + node_set(pgdat->node_id, nodemask);
>> > +
>> > set_task_reclaim_state(current, &sc.reclaim_state);
>> > psi_memstall_enter(&pflags);
>> > __fs_reclaim_acquire(_THIS_IP_);
>> > @@ -7642,6 +7699,7 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
>> > const unsigned long nr_pages = 1 << order;
>> > struct task_struct *p = current;
>> > unsigned int noreclaim_flag;
>> > + nodemask_t nodemask = NODE_MASK_NONE;
>> > struct scan_control sc = {
>> > .nr_to_reclaim = max(nr_pages, SWAP_CLUSTER_MAX),
>> > .gfp_mask = current_gfp_context(gfp_mask),
>> > @@ -7651,9 +7709,16 @@ static int __node_reclaim(struct pglist_data *pgdat, gfp_t gfp_mask, unsigned in
>> > .may_unmap = !!(node_reclaim_mode & RECLAIM_UNMAP),
>> > .may_swap = 1,
>> > .reclaim_idx = gfp_zone(gfp_mask),
>> > + .nodemask = &nodemask,
>> > };
>> > unsigned long pflags;
>> >
>> > + /*
>> > + * Set the nodemask in sc to indicate to shrink_node() that we're
>> > + * looking for reclaim from this node.
>> > + */
>> > + node_set(pgdat->node_id, nodemask);
>> > +
>> > trace_mm_vmscan_node_reclaim_begin(pgdat->node_id, order,
>> > sc.gfp_mask);
>> >
>> > --
>> > 2.39.0.rc0.267.gcb52ba06e7-goog
>>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 2:34 [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems Mina Almasry
2022-12-06 3:13 ` Huang, Ying
@ 2022-12-06 12:20 ` Michal Hocko
2022-12-06 16:06 ` Mina Almasry
2022-12-06 15:15 ` kernel test robot
2022-12-06 18:17 ` kernel test robot
3 siblings, 1 reply; 24+ messages in thread
From: Michal Hocko @ 2022-12-06 12:20 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> reclaim"") enabled demotion in memcg reclaim, which is the right thing
> to do, however, it introduced a regression in the behavior of
> try_to_free_mem_cgroup_pages().
>
> The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> of the cgroup should reduce by nr_pages. The callers expect
> try_to_free_mem_cgroup_pages() to also return the number of pages
> reclaimed, not demoted.
>
> However, what try_to_free_mem_cgroup_pages() actually does is it
> unconditionally counts demoted pages as reclaimed pages. So in practice
> when it is called it will often demote nr_pages and return the number of
> demoted pages to the caller. Demoted pages don't lower the memcg usage,
> and so try_to_free_mem_cgroup_pages() is not actually doing what the
> callers want it to do.
>
> Various things work suboptimally on memory tiered systems or don't work
> at all due to this:
>
> - memory.high enforcement likely doesn't work (it just demotes nr_pages
> instead of lowering the memcg usage by nr_pages).
> - try_charge_memcg() will keep retrying the charge while
> try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> making any room for the charge.
This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
> - memory.reclaim has a wonky interface. It advertises to the user it
> reclaims the provided amount but it will actually often demote that
> amount.
>
> There may be more effects to this issue.
>
> To fix these issues I propose shrink_folio_list() to only count pages
> demoted from inside of sc->nodemask to outside of sc->nodemask as
> 'reclaimed'.
Could you expand on why the node mask matters? From the charge point of
view it should be completely uninteresting as the charge remains.
I suspect we really need to change to reclaim metrics for memcg reclaim.
In the memory balancing reclaim we can indeed consider demotions as a
reclaim because the memory is freed in the end but for the memcg reclaim
we really should be counting discharges instead. No demotion/migration will
free up charges.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 2:34 [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems Mina Almasry
2022-12-06 3:13 ` Huang, Ying
2022-12-06 12:20 ` Michal Hocko
@ 2022-12-06 15:15 ` kernel test robot
2022-12-06 18:17 ` kernel test robot
3 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2022-12-06 15:15 UTC (permalink / raw)
To: Mina Almasry, Andrew Morton
Cc: oe-kbuild-all, Linux Memory Management List, Johannes Weiner,
Michal Hocko, Roman Gushchin, Shakeel Butt, Muchun Song,
Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl, Mina Almasry,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2163 bytes --]
Hi Mina,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on akpm-mm/mm-everything]
url: https://github.com/intel-lab-lkp/linux/commits/Mina-Almasry/mm-Fix-memcg-reclaim-on-memory-tiered-systems/20221206-103512
base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/r/20221206023406.3182800-1-almasrymina%40google.com
patch subject: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
config: openrisc-randconfig-r012-20221206
compiler: or1k-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d326a3b857c743d1e64b73a752505a65732b4e51
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Mina-Almasry/mm-Fix-memcg-reclaim-on-memory-tiered-systems/20221206-103512
git checkout d326a3b857c743d1e64b73a752505a65732b4e51
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=openrisc SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> mm/vmscan.c:1599:6: warning: no previous prototype for 'free_demote_page' [-Wmissing-prototypes]
1599 | void free_demote_page(struct page *page, unsigned long private)
| ^~~~~~~~~~~~~~~~
vim +/free_demote_page +1599 mm/vmscan.c
1598
> 1599 void free_demote_page(struct page *page, unsigned long private)
1600 {
1601 struct demotion_control *dc = (struct demotion_control *)private;
1602
1603 if (dc->demote_from_nodemask &&
1604 !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
1605 dc->nr_demoted_outside_nodemask--;
1606
1607 folio_put(page_folio(page));
1608 }
1609
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 155663 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/openrisc 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="or1k-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_BPF=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_OPENRISC=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_MMU=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_GENERIC_CSUM=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
#
# Processor type and features
#
CONFIG_OR1K_1200=y
CONFIG_DCACHE_WRITETHROUGH=y
CONFIG_OPENRISC_BUILTIN_DTB=""
#
# Class II Instructions
#
CONFIG_OPENRISC_HAVE_INST_FF1=y
CONFIG_OPENRISC_HAVE_INST_FL1=y
# CONFIG_OPENRISC_HAVE_INST_MUL is not set
CONFIG_OPENRISC_HAVE_INST_DIV=y
# CONFIG_OPENRISC_HAVE_INST_CMOV is not set
# CONFIG_OPENRISC_HAVE_INST_ROR is not set
# CONFIG_OPENRISC_HAVE_INST_RORI is not set
# CONFIG_OPENRISC_HAVE_INST_SEXT is not set
# end of Class II Instructions
CONFIG_NR_CPUS=2
CONFIG_SMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_OPENRISC_NO_SPR_SR_DSX=y
CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
CONFIG_CMDLINE=""
#
# Debugging options
#
# CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION is not set
CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK=y
# end of Debugging options
# end of Processor type and features
#
# General architecture-dependent options
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y
CONFIG_ARCH_HAS_DMA_CLEAR_UNCACHED=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
# CONFIG_COMPAT_32BIT_TIME is not set
# CONFIG_LOCK_EVENT_COUNTS is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
# CONFIG_MODULE_COMPRESS_NONE is not set
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_DECOMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_MQ is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CMA is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
# CONFIG_NET is not set
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
#
# PC-card bridges
#
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=m
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
CONFIG_INTEL_IXP4XX_EB=y
# CONFIG_QCOM_EBI2 is not set
CONFIG_MHI_BUS=m
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
# CONFIG_ARM_SCPI_POWER_DOMAIN is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_BCM47XX_NVRAM=y
# CONFIG_BCM47XX_SPROM is not set
CONFIG_CS_DSP=m
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
# CONFIG_GOOGLE_MEMCONSOLE_COREBOOT is not set
CONFIG_GOOGLE_VPD=m
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
# CONFIG_GNSS_USB is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_PARPORT=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=y
# CONFIG_NVME_FC is not set
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_FC=y
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=m
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HI6421V600_IRQ is not set
CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=m
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_SRAM=y
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=y
# CONFIG_HISI_HIKEY_USB is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
# CONFIG_ALTERA_STAPL is not set
CONFIG_ECHO=m
CONFIG_MISC_RTSX_USB=y
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_EBS=m
# CONFIG_DM_ERA is not set
CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_MULTIPATH_HST is not set
CONFIG_DM_MULTIPATH_IOA=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_PXRC=m
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=m
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ADC=m
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_ILITEK is not set
CONFIG_TOUCHSCREEN_IPROC=m
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MSG2638=m
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
# CONFIG_TOUCHSCREEN_MIGOR is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=y
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MXS_LRADC=m
CONFIG_TOUCHSCREEN_MX25=m
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
CONFIG_TOUCHSCREEN_USB_ELO=y
# CONFIG_TOUCHSCREEN_USB_E2I is not set
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TS4800 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=m
CONFIG_TOUCHSCREEN_STMPE=m
CONFIG_TOUCHSCREEN_SUN4I=m
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=m
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_TOUCHSCREEN_ZINITIX=m
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
CONFIG_RMI4_SMB=m
# CONFIG_RMI4_F03 is not set
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
# CONFIG_RMI4_F30 is not set
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=m
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_IOC3 is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
CONFIG_SERIAL_8250_MT6577=m
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=m
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
# CONFIG_SERIAL_8250_BCM7271 is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=m
# CONFIG_SERIAL_ATMEL is not set
CONFIG_SERIAL_MESON=m
# CONFIG_SERIAL_MESON_CONSOLE is not set
CONFIG_SERIAL_CLPS711X=y
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=m
# CONFIG_SERIAL_IMX_EARLYCON is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_HS_LPC32XX=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MSM=m
# CONFIG_SERIAL_QCOM_GENI is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
CONFIG_SERIAL_SIFIVE=m
CONFIG_SERIAL_LANTIQ=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=m
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART_CONSOLE is not set
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_SERIAL_ST_ASC=m
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_STM32=m
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
# CONFIG_SERIAL_OWL_CONSOLE is not set
CONFIG_SERIAL_RDA=y
# CONFIG_SERIAL_RDA_CONSOLE is not set
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
# CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_GOLDFISH_TTY=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_SERIAL_DEV_BUS=m
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
# CONFIG_IPMI_IPMB is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=m
CONFIG_IPMI_KCS_BMC=m
CONFIG_ASPEED_KCS_IPMI_BMC=m
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=m
CONFIG_IPMI_KCS_BMC_SERIO=m
CONFIG_ASPEED_BT_IPMI_BMC=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
# CONFIG_HW_RANDOM_IXP4XX is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
# CONFIG_HW_RANDOM_STM32 is not set
# CONFIG_HW_RANDOM_MESON is not set
CONFIG_HW_RANDOM_MTK=m
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_HW_RANDOM_NPCM is not set
# CONFIG_HW_RANDOM_KEYSTONE is not set
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
# CONFIG_DEVMEM is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=m
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_HIX5HD2=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=m
# CONFIG_I2C_AT91 is not set
CONFIG_I2C_AXXIA=y
# CONFIG_I2C_BCM2835 is not set
CONFIG_I2C_BCM_IPROC=m
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DAVINCI is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=m
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_HIGHLANDER is not set
CONFIG_I2C_HISI=m
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
CONFIG_I2C_IMX_LPI2C=m
# CONFIG_I2C_IOP3XX is not set
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=m
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
CONFIG_I2C_MT65XX=m
CONFIG_I2C_MT7621=m
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=m
CONFIG_I2C_OWL=m
# CONFIG_I2C_APPLE is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PNX=m
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
# CONFIG_I2C_QCOM_GENI is not set
# CONFIG_I2C_QUP is not set
CONFIG_I2C_RIIC=y
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_SPRD is not set
CONFIG_I2C_ST=m
CONFIG_I2C_STM32F4=m
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
CONFIG_I2C_SYNQUACER=y
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_WMT=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_XLP9XX=m
CONFIG_I2C_RCAR=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=y
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
CONFIG_SPMI=m
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=m
CONFIG_SPMI_MTK_PMIF=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
# CONFIG_PPS is not set
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_AS3722 is not set
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=m
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_DA850_PUPD=m
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
CONFIG_PINCTRL_LPC18XX=y
# CONFIG_PINCTRL_MAX77620 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PISTACHIO=y
# CONFIG_PINCTRL_RK805 is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_STMFX=m
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_OWL=y
# CONFIG_PINCTRL_S500 is not set
# CONFIG_PINCTRL_S700 is not set
# CONFIG_PINCTRL_S900 is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
CONFIG_PINCTRL_BCM2835=y
# CONFIG_PINCTRL_BCM4908 is not set
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
# CONFIG_PINCTRL_BCM6362 is not set
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
# CONFIG_PINCTRL_MT7623 is not set
CONFIG_PINCTRL_MT7629=y
# CONFIG_PINCTRL_MT8135 is not set
CONFIG_PINCTRL_MT8127=y
# CONFIG_PINCTRL_MT2712 is not set
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
# CONFIG_PINCTRL_MT6795 is not set
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
# CONFIG_PINCTRL_MT7986 is not set
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
# CONFIG_PINCTRL_MT8183 is not set
CONFIG_PINCTRL_MT8186=y
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
CONFIG_PINCTRL_MT8195=y
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=m
CONFIG_PINCTRL_PXA27X=m
# CONFIG_PINCTRL_MSM is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
# CONFIG_PINCTRL_SC7280_LPASS_LPI is not set
# CONFIG_PINCTRL_SM8250_LPASS_LPI is not set
# CONFIG_PINCTRL_SM8450_LPASS_LPI is not set
# CONFIG_PINCTRL_SC8280XP_LPASS_LPI is not set
CONFIG_PINCTRL_LPASS_LPI=y
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
# CONFIG_PINCTRL_PFC_EMEV2 is not set
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
CONFIG_PINCTRL_PFC_R8A7792=y
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
CONFIG_PINCTRL_PFC_R8A7740=y
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
# CONFIG_PINCTRL_RZG2L is not set
CONFIG_PINCTRL_PFC_R8A77470=y
# CONFIG_PINCTRL_PFC_R8A7745 is not set
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
CONFIG_PINCTRL_RZN1=y
# CONFIG_PINCTRL_RZV2M is not set
CONFIG_PINCTRL_PFC_SH7203=y
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
CONFIG_PINCTRL_PFC_SH7722=y
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
# CONFIG_PINCTRL_PFC_SH7724 is not set
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
CONFIG_PINCTRL_SPRD=m
CONFIG_PINCTRL_SPRD_SC9860=m
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
CONFIG_PINCTRL_STM32H743=y
# CONFIG_PINCTRL_STM32MP135 is not set
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_TI_IODELAY=m
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
CONFIG_PINCTRL_UNIPHIER_PXS3=y
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
CONFIG_GPIO_ASPEED=y
# CONFIG_GPIO_ASPEED_SGPIO is not set
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=y
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=m
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=m
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=m
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_PMIC_EIC_SPRD=y
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=m
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SNPS_CREG is not set
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=m
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
CONFIG_GPIO_TS4800=m
CONFIG_GPIO_UNIPHIER=y
# CONFIG_GPIO_VISCONTI is not set
CONFIG_GPIO_XGENE_SB=y
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_AMD_FCH is not set
CONFIG_GPIO_IDT3243X=m
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=m
CONFIG_GPIO_TS4900=m
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DLN2 is not set
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=m
CONFIG_GPIO_SL28CPLD=y
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=y
# CONFIG_GPIO_TWL4030 is not set
CONFIG_GPIO_TWL6040=m
# CONFIG_GPIO_UCB1400 is not set
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=m
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=m
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_MASTER_DS1WM=m
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=m
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_BRCMKONA=y
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
# CONFIG_POWER_RESET_GPIO is not set
CONFIG_POWER_RESET_GPIO_RESTART=y
# CONFIG_POWER_RESET_OCELOT_RESET is not set
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=m
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=m
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=m
CONFIG_BATTERY_88PM860X=m
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_INGENIC=m
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=y
# CONFIG_BATTERY_BQ27XXX_I2C is not set
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_CHARGER_AXP20X=m
# CONFIG_BATTERY_AXP20X is not set
CONFIG_AXP20X_POWER=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_BATTERY_TWL4030_MADC=m
# CONFIG_CHARGER_88PM860X is not set
CONFIG_CHARGER_PCF50633=m
# CONFIG_BATTERY_RX51 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_TWL4030=m
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=m
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77650=m
# CONFIG_CHARGER_MAX77976 is not set
CONFIG_CHARGER_MP2629=m
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_RK817 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_SC2731=m
# CONFIG_FUEL_GAUGE_SC27XX is not set
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD99954=m
CONFIG_RN5T618_POWER=m
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_BT1_PVT=m
CONFIG_SENSORS_BT1_PVT_ALARMS=y
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9052_ADC=m
# CONFIG_SENSORS_SPARX5 is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LAN966X is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC2992=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31730=m
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
CONFIG_SENSORS_NZXT_KRAKEN2=m
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1266=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_BEL_PFE is not set
CONFIG_SENSORS_BPA_RS600=m
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
# CONFIG_SENSORS_LT7182S is not set
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STPDDC60=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_TPS546D24 is not set
CONFIG_SENSORS_UCD9000=m
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
CONFIG_SENSORS_XDPE122=m
# CONFIG_SENSORS_XDPE122_REGULATOR is not set
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_PWM_FAN is not set
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
# CONFIG_SENSORS_SL28CPLD is not set
CONFIG_SENSORS_SBTSI=m
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=m
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM8350=m
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_DEVFREQ_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_HISI_THERMAL is not set
CONFIG_IMX_THERMAL=m
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
# CONFIG_MAX77620_THERMAL is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_SPEAR_THERMAL is not set
CONFIG_SUN8I_THERMAL=y
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
CONFIG_RCAR_GEN3_THERMAL=m
# CONFIG_RZG2L_THERMAL is not set
CONFIG_KIRKWOOD_THERMAL=m
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=m
#
# Intel thermal drivers
#
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
# CONFIG_BCM2711_THERMAL is not set
CONFIG_BCM2835_THERMAL=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_BCM_NS_THERMAL=m
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=m
# CONFIG_TI_THERMAL is not set
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=m
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=m
# end of NVIDIA Tegra thermal drivers
# CONFIG_GENERIC_ADC_THERMAL is not set
#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_SPMI_ADC_TM5 is not set
# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
# end of Qualcomm thermal drivers
# CONFIG_UNIPHIER_THERMAL is not set
CONFIG_SPRD_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BD957XMUF_WATCHDOG=m
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=y
# CONFIG_DA9063_WATCHDOG is not set
CONFIG_DA9062_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
CONFIG_WM8350_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=m
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=m
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_FTWDT010_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_EP93XX_WATCHDOG=m
CONFIG_OMAP_WATCHDOG=y
# CONFIG_PNX4008_WATCHDOG is not set
CONFIG_DAVINCI_WATCHDOG=y
# CONFIG_K3_RTI_WATCHDOG is not set
CONFIG_RN5T618_WATCHDOG=m
CONFIG_SUNXI_WATCHDOG=y
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_TWL4030_WATCHDOG is not set
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
# CONFIG_IMX7ULP_WDT is not set
CONFIG_RETU_WATCHDOG=y
# CONFIG_MOXART_WDT is not set
CONFIG_ST_LPC_WATCHDOG=m
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=m
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=m
CONFIG_DIGICOLOR_WATCHDOG=m
# CONFIG_LPC18XX_WATCHDOG is not set
CONFIG_RENESAS_WDT=m
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
# CONFIG_UNIPHIER_WATCHDOG is not set
CONFIG_RTD119X_WATCHDOG=y
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_PM8916_WATCHDOG is not set
CONFIG_VISCONTI_WATCHDOG=m
CONFIG_MSC313E_WATCHDOG=y
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_SC520_WDT=y
# CONFIG_KEMPLD_WDT is not set
CONFIG_BCM47XX_WDT=m
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=m
CONFIG_BCM_KONA_WDT_DEBUG=y
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
CONFIG_UML_WATCHDOG=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_SUN4I_GPADC=m
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_AT91_USART=m
CONFIG_MFD_ATMEL_FLEXCOM=m
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=m
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=y
CONFIG_MFD_MXS_LRADC=m
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=m
CONFIG_MFD_HI655X_PMIC=m
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=m
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
# CONFIG_PCF50633_GPIO is not set
CONFIG_UCB1400_CORE=m
CONFIG_MFD_PM8XXX=m
CONFIG_MFD_SPMI_PMIC=m
# CONFIG_MFD_SY7636A is not set
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=m
CONFIG_MFD_RN5T618=m
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=m
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# end of STMicroelectronics STMPE Interface Drivers
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
CONFIG_TPS65010=m
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
CONFIG_MFD_STW481X=m
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_ROHM_BD957XMUF=y
# CONFIG_MFD_STM32_LPTIMER is not set
CONFIG_MFD_STM32_TIMERS=m
# CONFIG_MFD_STPMIC1 is not set
CONFIG_MFD_STMFX=m
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_RSMU_I2C=m
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AS3722=m
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_BD957XMUF=m
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=m
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9121 is not set
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=m
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_HI6421 is not set
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=m
# CONFIG_REGULATOR_HI6421V600 is not set
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP873X=m
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LP87565 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=y
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
# CONFIG_REGULATOR_MC13892 is not set
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=m
# CONFIG_REGULATOR_MP8859 is not set
CONFIG_REGULATOR_MP886X=m
# CONFIG_REGULATOR_MPQ7920 is not set
CONFIG_REGULATOR_MT6311=m
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_MT6323=m
# CONFIG_REGULATOR_MT6331 is not set
# CONFIG_REGULATOR_MT6332 is not set
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_PBIAS is not set
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=m
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
# CONFIG_REGULATOR_RK808 is not set
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT4801=m
# CONFIG_REGULATOR_RT4831 is not set
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=m
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_STM32_BOOSTER is not set
CONFIG_REGULATOR_STM32_VREFBUF=m
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=m
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS65218=m
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_TPS65910=m
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=m
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=m
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
# CONFIG_IR_IMON is not set
CONFIG_IR_IMON_RAW=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_MESON=m
CONFIG_IR_MESON_TX=m
# CONFIG_IR_MTK is not set
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_REDRAT3=m
CONFIG_IR_RX51=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_STREAMZAP=m
CONFIG_IR_SUNXI=m
# CONFIG_IR_TOY is not set
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_ATI_REMOTE=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_RC_ST=m
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_IMG is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_MESON_AO=y
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
CONFIG_CEC_STI=m
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=m
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=m
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices
# CONFIG_DRM_KMB_DISPLAY is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=m
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=m
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=m
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=m
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_PANEL_DSI_CM=m
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=m
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
# CONFIG_DRM_PANEL_JDI_R63452 is not set
CONFIG_DRM_PANEL_KHADAS_TS050=m
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=m
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=m
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=m
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
CONFIG_DRM_PANEL_TDO_TL070WSH30=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
# CONFIG_DRM_CROS_EC_ANX7688 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_FSL_LDB=m
CONFIG_DRM_ITE_IT6505=m
# CONFIG_DRM_LONTIUM_LT8912B is not set
CONFIG_DRM_LONTIUM_LT9211=m
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=m
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=m
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=m
CONFIG_DRM_SII902X=m
# CONFIG_DRM_SII9234 is not set
CONFIG_DRM_SIMPLE_BRIDGE=y
# CONFIG_DRM_THINE_THC63LVD1024 is not set
CONFIG_DRM_TOSHIBA_TC358762=m
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=m
CONFIG_DRM_TOSHIBA_TC358768=y
# CONFIG_DRM_TOSHIBA_TC358775 is not set
CONFIG_DRM_TI_DLPC3433=y
# CONFIG_DRM_TI_TFP410 is not set
CONFIG_DRM_TI_SN65DSI83=m
# CONFIG_DRM_TI_SN65DSI86 is not set
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=y
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
CONFIG_DRM_ANALOGIX_DP=y
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
# CONFIG_DRM_I2C_ADV7511_CEC is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=m
# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set
# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set
CONFIG_DRM_DW_HDMI_GP_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=m
# end of Display Interface Bridges
CONFIG_DRM_IMX=m
# CONFIG_DRM_IMX_PARALLEL_DISPLAY is not set
# CONFIG_DRM_IMX_TVE is not set
# CONFIG_DRM_IMX_LDB is not set
CONFIG_DRM_IMX_HDMI=m
# CONFIG_DRM_V3D is not set
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_ETNAVIV_THERMAL=y
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_MXSFB is not set
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_LIMA is not set
# CONFIG_DRM_ASPEED_GFX is not set
CONFIG_DRM_TIDSS=y
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_SPRD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CLPS711X=m
# CONFIG_FB_IMX is not set
CONFIG_FB_ARC=m
CONFIG_FB_PVR2=m
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_ATMEL is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
CONFIG_FB_GOLDFISH=m
# CONFIG_FB_DA8XX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
CONFIG_FB_BROADSHEET=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_OMAP2 is not set
CONFIG_MMP_DISP=y
# CONFIG_MMP_DISP_CONTROLLER is not set
# CONFIG_MMP_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_QCOM_WLED=m
# CONFIG_BACKLIGHT_RT4831 is not set
CONFIG_BACKLIGHT_ADP5520=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=m
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_PROC_FS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
CONFIG_SND_HDA_CODEC_CIRRUS=m
# CONFIG_SND_HDA_CODEC_CS8409 is not set
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_PXA2XX_LIB=m
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_ADI=m
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_AMD_ACP_CONFIG=m
# CONFIG_SND_SOC_APPLE_MCA is not set
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_ATMEL_SOC_CLASSD=m
CONFIG_SND_ATMEL_SOC_PDMIC=m
# CONFIG_SND_ATMEL_SOC_I2S is not set
CONFIG_SND_SOC_MIKROE_PROTO=m
CONFIG_SND_MCHP_SOC_I2S_MCC=m
CONFIG_SND_MCHP_SOC_SPDIFTX=m
# CONFIG_SND_MCHP_SOC_SPDIFRX is not set
# CONFIG_SND_MCHP_SOC_PDMC is not set
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_CYGNUS=m
CONFIG_SND_BCM63XX_I2S_WHISTLER=m
# CONFIG_SND_EP93XX_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=m
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=m
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_AUD2HTX=m
CONFIG_SND_SOC_FSL_UTILS=m
CONFIG_SND_SOC_IMX_AUDMUX=m
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_JZ4740_SOC_I2S=m
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
# CONFIG_SND_SOC_IMG_SPDIF_OUT is not set
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
# CONFIG_SND_SOC_MT8186 is not set
CONFIG_SND_SOC_MTK_BTCVSD=m
# CONFIG_SND_SOC_MT8195 is not set
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
# CONFIG_SND_MESON_AXG_TDMIN is not set
# CONFIG_SND_MESON_AXG_TDMOUT is not set
# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
# CONFIG_SND_MESON_AXG_SPDIFOUT is not set
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
# CONFIG_SND_MESON_AXG_PDM is not set
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
# CONFIG_SND_MESON_G12A_TOACODEC is not set
# CONFIG_SND_MESON_G12A_TOHDMITX is not set
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
# CONFIG_SND_MXS_SOC is not set
CONFIG_SND_PXA2XX_SOC=m
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
# CONFIG_SND_SOC_SAMSUNG is not set
#
# SoC Audio support for Renesas SoCs
#
# CONFIG_SND_SOC_SH4_FSI is not set
# CONFIG_SND_SOC_RCAR is not set
CONFIG_SND_SOC_RZ=m
# end of SoC Audio support for Renesas SoCs
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
CONFIG_SND_SOC_SPRD=m
CONFIG_SND_SOC_SPRD_MCDT=m
CONFIG_SND_SOC_STI=m
#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_STM32_SAI is not set
# CONFIG_SND_SOC_STM32_I2S is not set
CONFIG_SND_SOC_STM32_SPDIFRX=m
CONFIG_SND_SOC_STM32_DFSDM=m
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
# CONFIG_SND_SUN4I_I2S is not set
CONFIG_SND_SUN4I_SPDIF=m
# CONFIG_SND_SUN50I_DMIC is not set
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=m
CONFIG_SND_SOC_TI_SDMA_PCM=m
#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=m
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
CONFIG_SND_SOC_DAVINCI_VCIF=m
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP3_TWL4030 is not set
# CONFIG_SND_SOC_OMAP_ABE_TWL6040 is not set
CONFIG_SND_SOC_OMAP_HDMI=m
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
CONFIG_SND_SOC_UNIPHIER=m
CONFIG_SND_SOC_UNIPHIER_AIO=m
# CONFIG_SND_SOC_UNIPHIER_LD11 is not set
CONFIG_SND_SOC_UNIPHIER_PXS2=m
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=m
CONFIG_SND_SOC_XILINX_I2S=m
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_88PM860X=m
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_WM_ADSP=m
# CONFIG_SND_SOC_AB8500_CODEC is not set
CONFIG_SND_SOC_AC97_CODEC=m
# CONFIG_SND_SOC_AD1836 is not set
CONFIG_SND_SOC_AD193X=m
# CONFIG_SND_SOC_AD193X_SPI is not set
CONFIG_SND_SOC_AD193X_I2C=m
CONFIG_SND_SOC_AD1980=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1372_I2C is not set
# CONFIG_SND_SOC_ADAU1372_SPI is not set
CONFIG_SND_SOC_ADAU1373=m
# CONFIG_SND_SOC_ADAU1701 is not set
CONFIG_SND_SOC_ADAU17X1=m
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
CONFIG_SND_SOC_ADAU1781=m
CONFIG_SND_SOC_ADAU1781_I2C=m
# CONFIG_SND_SOC_ADAU1781_SPI is not set
CONFIG_SND_SOC_ADAU1977=m
# CONFIG_SND_SOC_ADAU1977_SPI is not set
CONFIG_SND_SOC_ADAU1977_I2C=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_ADAV80X=m
# CONFIG_SND_SOC_ADAV801 is not set
CONFIG_SND_SOC_ADAV803=m
CONFIG_SND_SOC_ADS117X=m
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
CONFIG_SND_SOC_AK4375=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4535=m
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
CONFIG_SND_SOC_AK4641=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK4671=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_ALC5632=m
CONFIG_SND_SOC_AW8738=m
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=m
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CQ0093VC=m
# CONFIG_SND_SOC_CROS_EC_CODEC is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
# CONFIG_SND_SOC_CS35L36 is not set
# CONFIG_SND_SOC_CS35L41_SPI is not set
# CONFIG_SND_SOC_CS35L41_I2C is not set
CONFIG_SND_SOC_CS35L45_TABLES=m
CONFIG_SND_SOC_CS35L45=m
# CONFIG_SND_SOC_CS35L45_SPI is not set
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
# CONFIG_SND_SOC_CS42L83 is not set
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
# CONFIG_SND_SOC_CS4271_SPI is not set
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
CONFIG_SND_SOC_CS4349=m
# CONFIG_SND_SOC_CS47L15 is not set
# CONFIG_SND_SOC_CS47L24 is not set
# CONFIG_SND_SOC_CS47L35 is not set
# CONFIG_SND_SOC_CS47L85 is not set
# CONFIG_SND_SOC_CS47L90 is not set
# CONFIG_SND_SOC_CS47L92 is not set
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CX20442=m
CONFIG_SND_SOC_CX2072X=m
CONFIG_SND_SOC_JZ4740_CODEC=m
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
CONFIG_SND_SOC_JZ4760_CODEC=m
# CONFIG_SND_SOC_JZ4770_CODEC is not set
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_DA7210=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7218=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DA732X=m
CONFIG_SND_SOC_DA9055=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES7241=m
# CONFIG_SND_SOC_ES8316 is not set
CONFIG_SND_SOC_ES8326=m
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=m
CONFIG_SND_SOC_HDAC_HDA=m
CONFIG_SND_SOC_HDA=m
CONFIG_SND_SOC_ICS43432=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_ISABELLE=m
CONFIG_SND_SOC_LM49453=m
# CONFIG_SND_SOC_LOCHNAGAR_SC is not set
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98371=m
CONFIG_SND_SOC_MAX98504=m
# CONFIG_SND_SOC_MAX9867 is not set
CONFIG_SND_SOC_MAX98925=m
CONFIG_SND_SOC_MAX98926=m
# CONFIG_SND_SOC_MAX98927 is not set
CONFIG_SND_SOC_MAX98520=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
# CONFIG_SND_SOC_MAX98373_SDW is not set
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX98396=m
CONFIG_SND_SOC_MAX9850=m
CONFIG_SND_SOC_MAX9860=m
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
# CONFIG_SND_SOC_PCM179X_SPI is not set
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
# CONFIG_SND_SOC_PCM186X_SPI is not set
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM5102A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RK817=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT274=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT1011=m
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1016=m
CONFIG_SND_SOC_RT1019=m
CONFIG_SND_SOC_RT1305=m
CONFIG_SND_SOC_RT1308=m
CONFIG_SND_SOC_RT1308_SDW=m
# CONFIG_SND_SOC_RT1316_SDW is not set
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
# CONFIG_SND_SOC_RT5640 is not set
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5665=m
CONFIG_SND_SOC_RT5668=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_I2C=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT5682S=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
# CONFIG_SND_SOC_RT711_SDW is not set
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
# CONFIG_SND_SOC_RT715_SDCA_SDW is not set
CONFIG_SND_SOC_RT9120=m
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
# CONFIG_SND_SOC_SIMPLE_MUX is not set
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SRC4XXX_I2C=m
CONFIG_SND_SOC_SRC4XXX=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2518=m
CONFIG_SND_SOC_SSM2602=m
# CONFIG_SND_SOC_SSM2602_SPI is not set
CONFIG_SND_SOC_SSM2602_I2C=m
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STA529=m
CONFIG_SND_SOC_STAC9766=m
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS2780=m
CONFIG_SND_SOC_TAS5086=m
# CONFIG_SND_SOC_TAS571X is not set
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS5805M is not set
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TFA989X is not set
CONFIG_SND_SOC_TLV320ADC3XXX=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC26 is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
# CONFIG_SND_SOC_TLV320AIC3X_SPI is not set
CONFIG_SND_SOC_TLV320DAC33=m
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
CONFIG_SND_SOC_TSCS454=m
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
# CONFIG_SND_SOC_WCD9335 is not set
CONFIG_SND_SOC_WCD_MBHC=m
# CONFIG_SND_SOC_WCD934X is not set
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WL1273=m
# CONFIG_SND_SOC_WM0010 is not set
CONFIG_SND_SOC_WM1250_EV1=m
CONFIG_SND_SOC_WM2000=m
CONFIG_SND_SOC_WM2200=m
CONFIG_SND_SOC_WM5100=m
# CONFIG_SND_SOC_WM5102 is not set
CONFIG_SND_SOC_WM5110=m
CONFIG_SND_SOC_WM8350=m
CONFIG_SND_SOC_WM8400=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
CONFIG_SND_SOC_WM8727=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
# CONFIG_SND_SOC_WM8731_SPI is not set
CONFIG_SND_SOC_WM8737=m
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8955=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8983=m
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WM8988=m
CONFIG_SND_SOC_WM8990=m
CONFIG_SND_SOC_WM8991=m
CONFIG_SND_SOC_WM8993=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM8995=m
CONFIG_SND_SOC_WM8996=m
CONFIG_SND_SOC_WM8997=m
CONFIG_SND_SOC_WM8998=m
CONFIG_SND_SOC_WM9081=m
CONFIG_SND_SOC_WM9090=m
CONFIG_SND_SOC_WM9705=m
CONFIG_SND_SOC_WM9712=m
CONFIG_SND_SOC_WM9713=m
# CONFIG_SND_SOC_WSA881X is not set
CONFIG_SND_SOC_WSA883X=m
# CONFIG_SND_SOC_ZL38060 is not set
CONFIG_SND_SOC_LM4857=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MAX9768=m
CONFIG_SND_SOC_MAX9877=m
CONFIG_SND_SOC_MC13783=m
CONFIG_SND_SOC_ML26124=m
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_MT6359 is not set
CONFIG_SND_SOC_MT6660=m
# CONFIG_SND_SOC_NAU8315 is not set
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD is not set
CONFIG_SND_AUDIO_GRAPH_CARD2=m
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=m
CONFIG_SND_TEST_COMPONENT=m
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_VIVALDI is not set
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
# CONFIG_HID_LOGITECH_HIDPP is not set
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
# CONFIG_HID_MEGAWORLD_FF is not set
CONFIG_HID_REDRAGON=m
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_RETRODE=m
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
# CONFIG_HID_SIGMAMICRO is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=m
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_UDRAW_PS3=m
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_OF_ELAN=y
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
CONFIG_I2C_HID_CORE=m
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG_PRODUCTLIST=y
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_BRCMSTB=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SPEAR=m
# CONFIG_USB_OHCI_HCD_STI is not set
CONFIG_USB_OHCI_HCD_S3C2410=m
CONFIG_USB_OHCI_HCD_LPC32XX=m
CONFIG_USB_OHCI_HCD_AT91=m
CONFIG_USB_OHCI_HCD_OMAP3=m
# CONFIG_USB_OHCI_HCD_DAVINCI is not set
# CONFIG_USB_OHCI_SH is not set
# CONFIG_USB_OHCI_EXYNOS is not set
# CONFIG_USB_CNS3XXX_OHCI is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_RENESAS_USBHS_HCD is not set
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=m
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
# CONFIG_USB_CDNS_SUPPORT is not set
CONFIG_USB_MTU3=y
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
# CONFIG_USB_MTU3_DEBUG is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_ULPI is not set
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=m
CONFIG_USB_DWC3_EXYNOS=m
# CONFIG_USB_DWC3_KEYSTONE is not set
CONFIG_USB_DWC3_MESON_G12A=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC3_ST=m
# CONFIG_USB_DWC3_QCOM is not set
CONFIG_USB_DWC3_IMX8MP=m
CONFIG_USB_DWC3_AM62=m
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=y
# CONFIG_USB_CHIPIDEA_UDC is not set
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=m
# CONFIG_USB_SERIAL_SSU100 is not set
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_QCOM_EUD is not set
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_CHAOSKEY is not set
CONFIG_BRCM_USB_PINMAP=m
CONFIG_USB_ONBOARD_HUB=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=m
# CONFIG_USB_TEGRA_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_JZ4770_PHY=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=m
# CONFIG_USB_FUSB300 is not set
CONFIG_USB_FOTG210_UDC=m
# CONFIG_USB_GR_UDC is not set
CONFIG_USB_R8A66597=m
# CONFIG_USB_RENESAS_USBHS_UDC is not set
# CONFIG_USB_RENESAS_USB3 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=m
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_ASPEED_UDC is not set
CONFIG_USB_ASPEED_VHUB=m
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_CONFIGFS=y
# CONFIG_USB_CONFIGFS_SERIAL is not set
CONFIG_USB_CONFIGFS_ACM=y
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
# CONFIG_GADGET_UAC1 is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
# CONFIG_TYPEC_TCPCI is not set
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_TPS6598X=m
# CONFIG_TYPEC_ANX7411 is not set
# CONFIG_TYPEC_RT1719 is not set
# CONFIG_TYPEC_HD3SS3220 is not set
# CONFIG_TYPEC_STUSB160X is not set
CONFIG_TYPEC_QCOM_PMIC=m
# CONFIG_TYPEC_WUSB3801 is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_FSA4480 is not set
CONFIG_TYPEC_MUX_PI3USB30532=m
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
# CONFIG_TYPEC_NVIDIA_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=m
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_CRYPTO is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=m
# CONFIG_MMC_SDHCI_SPEAR is not set
CONFIG_MMC_SDHCI_S3C_DMA=y
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_DAVINCI is not set
CONFIG_MMC_S3C=m
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_TMIO_CORE=m
# CONFIG_MMC_TMIO is not set
CONFIG_MMC_SDHI=m
# CONFIG_MMC_SDHI_SYS_DMAC is not set
CONFIG_MMC_SDHI_INTERNAL_DMAC=m
CONFIG_MMC_UNIPHIER=m
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
# CONFIG_MMC_DW_BLUEFIELD is not set
CONFIG_MMC_DW_EXYNOS=m
CONFIG_MMC_DW_HI3798CV200=m
CONFIG_MMC_DW_K3=m
# CONFIG_MMC_SH_MMCIF is not set
CONFIG_MMC_VUB300=m
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_USB is not set
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
# CONFIG_MMC_BCM2835 is not set
# CONFIG_MMC_MTK is not set
CONFIG_MMC_OWL=m
# CONFIG_MMC_LITEX is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_ARIEL=m
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=m
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_TURRIS_OMNIA is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_COBALT_QUBE=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
# CONFIG_LEDS_MAX77650 is not set
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=m
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_PM8058=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_TPS6105X is not set
CONFIG_LEDS_IP30=m
# CONFIG_LEDS_BCM63138 is not set
CONFIG_LEDS_LGM=m
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=m
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_RT4505=m
CONFIG_LEDS_RT8515=m
# CONFIG_LEDS_SGM3140 is not set
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
CONFIG_LEDS_TRIGGER_TTY=m
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SERIALIO=y
# CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
# CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
# CONFIG_SPEAKUP_SYNTH_APOLLO is not set
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
# CONFIG_SPEAKUP_SYNTH_DECEXT is not set
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
# CONFIG_SPEAKUP_SYNTH_KEYPC is not set
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
# end of Speakup console speech
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_IMG_ASCII_LCD=y
# CONFIG_HT16K33 is not set
CONFIG_LCD2S=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=m
CONFIG_UIO=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_PRUSS=y
CONFIG_VFIO=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PLATFORM=m
CONFIG_VFIO_AMBA=m
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=m
CONFIG_VFIO_MDEV=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=m
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
# CONFIG_ADT7316_I2C is not set
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_USB_EMXX=m
CONFIG_STAGING_MEDIA=y
# CONFIG_STAGING_BOARD is not set
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
# CONFIG_GREYBUS_BOOTROM is not set
CONFIG_GREYBUS_HID=m
# CONFIG_GREYBUS_LIGHT is not set
# CONFIG_GREYBUS_LOG is not set
CONFIG_GREYBUS_LOOPBACK=m
# CONFIG_GREYBUS_POWER is not set
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
# CONFIG_GREYBUS_GPIO is not set
CONFIG_GREYBUS_I2C=m
# CONFIG_GREYBUS_SDIO is not set
# CONFIG_GREYBUS_UART is not set
# CONFIG_GREYBUS_USB is not set
CONFIG_GREYBUS_ARCHE=y
CONFIG_BCM_VIDEOCORE=m
CONFIG_BCM2835_VCHIQ=m
CONFIG_VCHIQ_CDEV=y
# CONFIG_SND_BCM2835 is not set
CONFIG_BCM2835_VCHIQ_MMAL=m
CONFIG_XIL_AXIS_FIFO=m
# CONFIG_FIELDBUS_DEV is not set
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_RK808 is not set
CONFIG_COMMON_CLK_HI655X=m
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
CONFIG_DW_APB_TIMER=y
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
# CONFIG_MESON6_TIMER is not set
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
CONFIG_TEGRA_TIMER=y
# CONFIG_TEGRA186_TIMER is not set
CONFIG_VT8500_TIMER=y
CONFIG_NPCM7XX_TIMER=y
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_ARMV7M_SYSTICK is not set
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_FSL_FTM_TIMER=y
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_PXA=y
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_QCOM is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
CONFIG_ASPEED_LPC_SNOOP=y
# CONFIG_ASPEED_UART_ROUTING is not set
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers
CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=m
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# CONFIG_DPAA2_CONSOLE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_MMSYS=y
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
# CONFIG_QCOM_GSBI is not set
CONFIG_QCOM_LLCC=y
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
CONFIG_SOC_RENESAS=y
# CONFIG_RST_RCAR is not set
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
# CONFIG_SYSC_R8A77995 is not set
# CONFIG_SYSC_R8A7794 is not set
# CONFIG_SYSC_R8A77990 is not set
# CONFIG_SYSC_R8A7779 is not set
CONFIG_SYSC_R8A7790=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
# CONFIG_SYSC_R8A77965 is not set
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
# CONFIG_SYSC_R8A779F0 is not set
# CONFIG_SYSC_R8A7792 is not set
# CONFIG_SYSC_R8A77980 is not set
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
# CONFIG_SYSC_R8A779G0 is not set
# CONFIG_SYSC_RMOBILE is not set
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
# CONFIG_SYSC_R8A774E1 is not set
# CONFIG_SYSC_R8A774A1 is not set
CONFIG_SYSC_R8A774B1=y
# CONFIG_ROCKCHIP_GRF is not set
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_CHIPID is not set
# CONFIG_EXYNOS_USI is not set
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_EXYNOS_REGULATOR_COUPLER is not set
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
# CONFIG_SOC_TI is not set
CONFIG_UX500_SOC_ID=y
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=m
# CONFIG_ARM_TEGRA_DEVFREQ is not set
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
# CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU is not set
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=y
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_QCOM_SPMI_MISC=y
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
CONFIG_DDR=y
# CONFIG_ATMEL_SDRAMC is not set
# CONFIG_ATMEL_EBI is not set
CONFIG_BRCMSTB_DPFE=y
# CONFIG_BRCMSTB_MEMC is not set
# CONFIG_BT1_L2_CTL is not set
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=m
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_GPMC_DEBUG=y
# CONFIG_MVEBU_DEVBUS is not set
CONFIG_FSL_CORENET_CF=m
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=m
# CONFIG_DA8XX_DDRCTL is not set
CONFIG_RENESAS_RPCIF=m
CONFIG_STM32_FMC2_EBI=m
CONFIG_SAMSUNG_MC=y
# CONFIG_EXYNOS5422_DMC is not set
# CONFIG_EXYNOS_SROM is not set
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
# CONFIG_TEGRA210_EMC is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
# CONFIG_IIO_SW_TRIGGER is not set
# CONFIG_IIO_TRIGGERED_EVENT is not set
#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA180=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
CONFIG_DMARD06=m
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
CONFIG_FXLS8962AF_I2C=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
# CONFIG_MC3230 is not set
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
# CONFIG_MMA9553 is not set
# CONFIG_MSA311 is not set
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD799X is not set
CONFIG_ADI_AXI_ADC=m
# CONFIG_ASPEED_ADC is not set
CONFIG_AT91_ADC=m
CONFIG_AT91_SAMA5D2_ADC=m
CONFIG_AXP20X_ADC=m
# CONFIG_AXP288_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_EXYNOS_ADC=m
CONFIG_MXS_LRADC_ADC=m
CONFIG_FSL_MX25_ADC=m
CONFIG_HX711=m
# CONFIG_INA2XX_ADC is not set
CONFIG_INGENIC_ADC=m
CONFIG_IMX7D_ADC=m
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LPC18XX_ADC=m
# CONFIG_LPC32XX_ADC is not set
CONFIG_LTC2471=m
# CONFIG_LTC2485 is not set
CONFIG_LTC2497=m
CONFIG_MAX1363=m
# CONFIG_MAX9611 is not set
CONFIG_MCP3422=m
CONFIG_MEDIATEK_MT6577_AUXADC=m
# CONFIG_MESON_SARADC is not set
CONFIG_MP2629_ADC=m
# CONFIG_NAU7802 is not set
CONFIG_NPCM_ADC=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_PM8XXX_XOADC=m
# CONFIG_QCOM_SPMI_RRADC is not set
CONFIG_QCOM_SPMI_IADC=m
# CONFIG_QCOM_SPMI_VADC is not set
# CONFIG_QCOM_SPMI_ADC5 is not set
# CONFIG_RCAR_GYRO_ADC is not set
CONFIG_RN5T618_ADC=m
CONFIG_ROCKCHIP_SARADC=m
# CONFIG_RICHTEK_RTQ6056 is not set
CONFIG_RZG2L_ADC=m
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=m
# CONFIG_STM32_ADC_CORE is not set
CONFIG_STM32_DFSDM_CORE=m
CONFIG_STM32_DFSDM_ADC=m
# CONFIG_STMPE_ADC is not set
CONFIG_SUN4I_GPADC=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADS1015=m
CONFIG_TI_AM335X_ADC=m
CONFIG_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
# CONFIG_VF610_ADC is not set
CONFIG_VIPERBOARD_ADC=m
CONFIG_XILINX_XADC=m
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_HMC425=m
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_CCS811=m
# CONFIG_IAQCORE is not set
# CONFIG_PMS7003 is not set
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
# CONFIG_SENSIRION_SGP30 is not set
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
# CONFIG_SPS30_SERIAL is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=m
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=m
CONFIG_AD5593R=m
CONFIG_AD5686=m
CONFIG_AD5696_I2C=m
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=m
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MAX5821=m
# CONFIG_MCP4725 is not set
CONFIG_STM32_DAC=m
CONFIG_STM32_DAC_CORE=m
CONFIG_TI_DAC5571=m
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver
#
# Filters
#
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
CONFIG_MAX30102=m
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
# CONFIG_HDC2010 is not set
# CONFIG_HID_SENSOR_HUMIDITY is not set
# CONFIG_HTS221 is not set
CONFIG_HTU21=m
# CONFIG_SI7005 is not set
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
# CONFIG_BOSCH_BNO055_SERIAL is not set
# CONFIG_BOSCH_BNO055_I2C is not set
# CONFIG_FXOS8700_I2C is not set
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=m
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
CONFIG_CM3323=m
CONFIG_CM3605=m
CONFIG_CM36651=m
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=m
# CONFIG_IQS621_ALS is not set
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
# CONFIG_RPR0521 is not set
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
# CONFIG_LTRF216A is not set
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2591=m
CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=m
# CONFIG_VEML6030 is not set
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone
#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MCP4018=m
CONFIG_MCP4531=m
CONFIG_TPL0102=m
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HID_SENSOR_PRESS=m
# CONFIG_HP03 is not set
CONFIG_ICP10100=m
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=m
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=m
CONFIG_HP206C=m
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=m
CONFIG_PING=m
# CONFIG_RFD77402 is not set
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
# CONFIG_SX9500 is not set
CONFIG_SRF08=m
# CONFIG_VCNL3020 is not set
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
# CONFIG_HID_SENSOR_TEMP is not set
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TMP117=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
# end of Temperature sensors
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_OMPIC=y
CONFIG_OR1K_PIC=y
CONFIG_JCORE_AIC=y
# CONFIG_RENESAS_INTC_IRQPIN is not set
CONFIG_RENESAS_IRQC=y
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
CONFIG_SL28CPLD_INTC=y
CONFIG_TS4800_IRQ=y
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
CONFIG_IMX_IRQSTEER=y
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
# CONFIG_RESET_BCM6345 is not set
CONFIG_RESET_BERLIN=y
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
CONFIG_RESET_MESON=m
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
CONFIG_RESET_SIMPLE=y
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
# CONFIG_RESET_ZYNQ is not set
CONFIG_COMMON_RESET_HI3660=m
CONFIG_COMMON_RESET_HI6220=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
CONFIG_PHY_XGENE=m
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_SUN4I_USB=y
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
CONFIG_PHY_SUN9I_USB=m
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
CONFIG_PHY_MESON_G12A_USB2=y
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=m
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=m
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=m
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_TORRENT is not set
CONFIG_PHY_CADENCE_DPHY=y
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
CONFIG_PHY_MIXEL_MIPI_DPHY=m
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
CONFIG_PHY_HI6220_USB=m
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=m
# CONFIG_PHY_HI3670_PCIE is not set
CONFIG_PHY_HISTB_COMBPHY=y
# CONFIG_PHY_HISI_INNO_USB2 is not set
CONFIG_PHY_INGENIC_USB=m
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=y
CONFIG_PHY_MVEBU_CP110_UTMI=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_PXA_USB=m
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
# CONFIG_PHY_MTK_PCIE is not set
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=m
CONFIG_PHY_MTK_XSPHY=m
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_MAPPHONE_MDM6600=m
CONFIG_PHY_OCELOT_SERDES=m
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_EDP is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
CONFIG_PHY_QCOM_QUSB2=m
# CONFIG_PHY_QCOM_USB_HS is not set
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
CONFIG_PHY_QCOM_USB_SS=y
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
CONFIG_PHY_MT7621_PCI=m
# CONFIG_PHY_RALINK_USB is not set
CONFIG_PHY_RCAR_GEN3_USB3=m
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PHY_EXYNOS_DP_VIDEO=m
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=m
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=m
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
# CONFIG_PHY_UNIPHIER_PCIE is not set
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=m
CONFIG_PHY_ST_SPEAR1340_MIPHY=m
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=m
CONFIG_PHY_DM816X_USB=m
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
CONFIG_OMAP_CONTROL_PHY=m
CONFIG_TI_PIPE3=m
CONFIG_PHY_TUSB1210=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_BRCM_NVRAM=m
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=m
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
CONFIG_NVMEM_LPC18XX_EEPROM=m
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=y
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_MSU=m
# CONFIG_INTEL_TH_PTI is not set
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=m
# CONFIG_FSI_SBEFIFO is not set
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=m
CONFIG_STM32_TIMER_CNT=m
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_TI_EQEP=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
# CONFIG_TI_ECAP_CAPTURE is not set
CONFIG_MOST=y
# CONFIG_MOST_USB_HDM is not set
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=m
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_SYSCTL is not set
# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set
CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=m
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=m
CONFIG_EROFS_FS_DEBUG=y
# CONFIG_EROFS_FS_XATTR is not set
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_SM4=m
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
CONFIG_CRYPTO_DEV_S5P=y
# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_QCE is not set
CONFIG_CRYPTO_DEV_QCOM_RNG=m
CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=m
CONFIG_CRYPTO_DEV_HISI_SEC=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_CRYPTO_DEV_SA2UL=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=y
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set
CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_POLYNOMIAL=m
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_VMLINUX_MAP is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
#
# openrisc Debugging
#
# end of openrisc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAULT_INJECTION_USERCOPY is not set
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_MMC_REQUEST is not set
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
CONFIG_WARN_MISSING_DOCUMENTS=y
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 12:20 ` Michal Hocko
@ 2022-12-06 16:06 ` Mina Almasry
2022-12-06 19:55 ` Michal Hocko
0 siblings, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-06 16:06 UTC (permalink / raw)
To: Michal Hocko
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > to do, however, it introduced a regression in the behavior of
> > try_to_free_mem_cgroup_pages().
> >
> > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > of the cgroup should reduce by nr_pages. The callers expect
> > try_to_free_mem_cgroup_pages() to also return the number of pages
> > reclaimed, not demoted.
> >
> > However, what try_to_free_mem_cgroup_pages() actually does is it
> > unconditionally counts demoted pages as reclaimed pages. So in practice
> > when it is called it will often demote nr_pages and return the number of
> > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > callers want it to do.
> >
> > Various things work suboptimally on memory tiered systems or don't work
> > at all due to this:
> >
> > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > instead of lowering the memcg usage by nr_pages).
> > - try_charge_memcg() will keep retrying the charge while
> > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > making any room for the charge.
>
> This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
>
Ah, I did indeed miss this. Thanks for the pointer. However I don't
understand this bit from your email (sorry I'm probably missing
something):
"I suspect this is rather unlikely situation, though. The last tear
(without any fallback) should have some memory to reclaim most of
the time."
Reading the code in try_charge_memcg(), I don't see the last retry for
try_to_free_mem_cgroup_pages() do anything special. My concern here is
that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
report back that it was able to 'reclaim' memory, but the charge keeps
failing because the memcg reclaim didn't actually make room for the
charge. What happens in this case? My understanding is that the memcg
oom-killer gets wrongly invoked.
> > - memory.reclaim has a wonky interface. It advertises to the user it
> > reclaims the provided amount but it will actually often demote that
> > amount.
> >
> > There may be more effects to this issue.
> >
> > To fix these issues I propose shrink_folio_list() to only count pages
> > demoted from inside of sc->nodemask to outside of sc->nodemask as
> > 'reclaimed'.
>
> Could you expand on why the node mask matters? From the charge point of
> view it should be completely uninteresting as the charge remains.
>
> I suspect we really need to change to reclaim metrics for memcg reclaim.
> In the memory balancing reclaim we can indeed consider demotions as a
> reclaim because the memory is freed in the end but for the memcg reclaim
> we really should be counting discharges instead. No demotion/migration will
> free up charges.
I think what you're describing is exactly what this patch aims to do.
I'm proposing an interface change to shrink_folio_list() such that it
only counts demoted pages as reclaimed iff sc->nodemask is provided by
the caller and the demotion removed pages from inside sc->nodemask to
outside sc->nodemask. In this case:
1. memory balancing reclaim would pass sc->nodemask=nid to
shrink_folio_list() indicating that it should count pages demoted from
sc->nodemask as reclaimed.
2. memcg reclaim would pass sc->nodemask=NULL to shrink_folio_list()
indicating that it is looking for reclaim across all nodes and no
demoted pages should count as reclaimed.
Sorry if the commit message was not clear. I can try making it clearer
in the next version but it's already very long.
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 2:34 [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems Mina Almasry
` (2 preceding siblings ...)
2022-12-06 15:15 ` kernel test robot
@ 2022-12-06 18:17 ` kernel test robot
3 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2022-12-06 18:17 UTC (permalink / raw)
To: Mina Almasry, Andrew Morton
Cc: llvm, oe-kbuild-all, Linux Memory Management List,
Johannes Weiner, Michal Hocko, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
Mina Almasry, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2540 bytes --]
Hi Mina,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on akpm-mm/mm-everything]
url: https://github.com/intel-lab-lkp/linux/commits/Mina-Almasry/mm-Fix-memcg-reclaim-on-memory-tiered-systems/20221206-103512
base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/r/20221206023406.3182800-1-almasrymina%40google.com
patch subject: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
config: arm-randconfig-r036-20221206
compiler: clang version 16.0.0 (https://github.com/llvm/llvm-project 6e4cea55f0d1104408b26ac574566a0e4de48036)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm cross compiling tool for clang build
# apt-get install binutils-arm-linux-gnueabi
# https://github.com/intel-lab-lkp/linux/commit/d326a3b857c743d1e64b73a752505a65732b4e51
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Mina-Almasry/mm-Fix-memcg-reclaim-on-memory-tiered-systems/20221206-103512
git checkout d326a3b857c743d1e64b73a752505a65732b4e51
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> mm/vmscan.c:1599:6: warning: no previous prototype for function 'free_demote_page' [-Wmissing-prototypes]
void free_demote_page(struct page *page, unsigned long private)
^
mm/vmscan.c:1599:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void free_demote_page(struct page *page, unsigned long private)
^
static
1 warning generated.
vim +/free_demote_page +1599 mm/vmscan.c
1598
> 1599 void free_demote_page(struct page *page, unsigned long private)
1600 {
1601 struct demotion_control *dc = (struct demotion_control *)private;
1602
1603 if (dc->demote_from_nodemask &&
1604 !node_isset(page_to_nid(page), *dc->demote_from_nodemask))
1605 dc->nr_demoted_outside_nodemask--;
1606
1607 folio_put(page_folio(page));
1608 }
1609
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 153596 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 6.1.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 16.0.0 (git://gitmirror/llvm_project 6e4cea55f0d1104408b26ac574566a0e4de48036)"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=160000
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=160000
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=160000
CONFIG_RUST_IS_AVAILABLE=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_WATCH_QUEUE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem
CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# CONFIG_FORCE_TASKS_RCU is not set
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
# CONFIG_KALLSYMS is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PHYS_OFFSET=0x00800000
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2
#
# System Type
#
# CONFIG_MMU is not set
CONFIG_ARM_SINGLE_ARMV7M=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
# CONFIG_ARCH_AT91 is not set
CONFIG_ARCH_MXC=y
#
# Cortex-A/Cortex-M asymmetric multiprocessing platforms
#
# CONFIG_SOC_IMX7D is not set
# CONFIG_SOC_IMX7ULP is not set
CONFIG_SOC_IMXRT=y
# CONFIG_SOC_VF610 is not set
CONFIG_ARCH_STM32=y
# CONFIG_MACH_STM32F429 is not set
CONFIG_MACH_STM32F469=y
CONFIG_MACH_STM32F746=y
CONFIG_MACH_STM32F769=y
# CONFIG_MACH_STM32H743 is not set
# CONFIG_ARCH_LPC18XX is not set
# CONFIG_ARCH_MPS2 is not set
#
# Processor Type
#
CONFIG_CPU_V7M=y
CONFIG_CPU_THUMBONLY=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_32v7M=y
CONFIG_CPU_ABRT_NOMMU=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_NOP=y
CONFIG_CPU_CACHE_V7M=y
CONFIG_CPU_V7M_NUM_IRQ=90
#
# Processor Features
#
CONFIG_ARM_THUMB=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
# CONFIG_SET_MEM_PARAM is not set
CONFIG_DRAM_BASE=0x00800000
CONFIG_DRAM_SIZE=0x00800000
# CONFIG_REMAP_VECTORS_TO_RAM is not set
CONFIG_ARM_MPU=y
# end of System Type
#
# Bus support
#
# end of Bus support
#
# Kernel Features
#
CONFIG_IRQSTACKS=y
CONFIG_PAGE_OFFSET=0x00800000
CONFIG_ARCH_NR_GPIO=0
CONFIG_HZ_FIXED=0
# CONFIG_HZ_100 is not set
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_THUMB2_KERNEL=y
CONFIG_AEABI=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
# end of Kernel Features
#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
# end of Boot options
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_CPUIDLE is not set
# CONFIG_ARM_CLPS711X_CPUIDLE is not set
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
# CONFIG_ARM_ZYNQ_CPUIDLE is not set
CONFIG_ARM_AT91_CPUIDLE=y
# CONFIG_ARM_EXYNOS_CPUIDLE is not set
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
# end of ARM CPU Idle Drivers
# end of CPU Idle
# end of CPU Power Management
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# end of Floating point emulation
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_USERSPACE_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_APM_EMULATION=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
# end of Power management options
CONFIG_AS_VFP_VMRS_FPINST=y
#
# General architecture-dependent options
#
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_HAVE_ARCH_PFN_VALID=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_FREEZER=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF_FDPIC is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BINFMT_FLAT_OLD=y
# CONFIG_BINFMT_ZFLAT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_PAGE_REPORTING=y
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
# CONFIG_ATM_LANE is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_MRP is not set
CONFIG_BRIDGE_CFM=y
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_CLS_FLOWER is not set
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_VSOCKETS=y
# CONFIG_VSOCKETS_DIAG is not set
# CONFIG_VSOCKETS_LOOPBACK is not set
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
# CONFIG_QRTR_TUN is not set
CONFIG_QRTR_MHI=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
# CONFIG_BT_LE is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
# CONFIG_BT_HCIBTUSB_BCM is not set
# CONFIG_BT_HCIBTUSB_MTK is not set
# CONFIG_BT_HCIBTUSB_RTL is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_ATH3K=y
# CONFIG_BT_QCOMSMD is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_PN544_I2C is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
# CONFIG_NFC_ST21NFCA_I2C is not set
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_SELFTESTS is not set
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
# CONFIG_NETDEV_ADDR_LIST_TEST is not set
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
#
# PC-card bridges
#
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_PM_QOS_KUNIT_TEST is not set
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_MOXTET is not set
# CONFIG_HISILICON_LPC is not set
CONFIG_IMX_WEIM=y
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
CONFIG_VEXPRESS_CONFIG=y
# CONFIG_FSL_MC_BUS is not set
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
CONFIG_CS_DSP=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_GNSS=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_OF_PARTS_BCM4908 is not set
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_IMPA7=y
# CONFIG_MTD_UCLINUX is not set
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_MCHP48L640 is not set
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
CONFIG_MTD_SPI_NAND=y
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_LPDDR2_NVM=y
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
#
# NVME Support
#
# end of NVME Support
#
# Misc devices
#
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_GEHC_ACHC is not set
CONFIG_HI6421V600_IRQ=y
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
# CONFIG_XILINX_SDFEC is not set
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_ALTERA_STAPL=y
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
# end of SCSI device support
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=y
CONFIG_MACSEC=y
# CONFIG_NETCONSOLE is not set
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
# CONFIG_VSOCKMON is not set
CONFIG_MHI_NET=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_VIRTIO=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_ACTIONS is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_XGENE is not set
# CONFIG_NET_XGENE_V2 is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CORTINA is not set
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=y
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
CONFIG_DM9051=y
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_FTMAC100=y
CONFIG_FTGMAC100=y
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
# CONFIG_FSL_FMAN is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_FSL_XGMAC_MDIO is not set
CONFIG_GIANFAR=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_ADI=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
# CONFIG_PXA168_ETH is not set
# CONFIG_NET_VENDOR_MEDIATEK is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLXSW_CORE is not set
CONFIG_MLXFW=y
# CONFIG_MLXBF_GIGE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_AX88796=y
# CONFIG_AX88796_93CX6 is not set
# CONFIG_LPC_ENET is not set
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_SH_ETH is not set
# CONFIG_RAVB is not set
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_NET_VENDOR_SOLARFLARE is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
CONFIG_SMC911X=y
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_SNI_AVE is not set
# CONFIG_SNI_NETSEC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUNPLUS=y
# CONFIG_SP7021_EMAC is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_FIXED_PHY=y
# CONFIG_SFP is not set
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
# CONFIG_MESON_GXL_PHY is not set
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
# CONFIG_BCM63XX_PHY is not set
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MARVELL_PHY is not set
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
# CONFIG_MAXLINEAR_GPHY is not set
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_AT803X_PHY is not set
CONFIG_QSEMI_PHY=y
# CONFIG_REALTEK_PHY is not set
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PSE_CONTROLLER=y
# CONFIG_PSE_REGULATOR is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_AT91 is not set
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
# CONFIG_CAN_SUN4I is not set
CONFIG_CAN_TI_HECC=y
# CONFIG_CAN_XILINXCAN is not set
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
# CONFIG_CAN_CC770_PLATFORM is not set
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_SOFTING=y
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
# CONFIG_CAN_KVASER_USB is not set
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
# CONFIG_MDIO_ASPEED is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_IPQ4019 is not set
CONFIG_MDIO_IPQ8064=y
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
#
# PCS device drivers
#
# CONFIG_PCS_RZN1_MIIC is not set
CONFIG_PCS_ALTERA_TSE=y
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
CONFIG_USB_AN2720=y
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
# CONFIG_P54_SPI is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2U=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921U=y
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_USB=y
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_MAC80211_HWSIM is not set
CONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_VIRT_WIFI is not set
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
# CONFIG_SLIC_DS26522 is not set
#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
# CONFIG_WWAN_HWSIM is not set
# CONFIG_MHI_WWAN_CTRL is not set
CONFIG_MHI_WWAN_MBIM=y
# CONFIG_QCOM_BAM_DMUX is not set
# CONFIG_RPMSG_WWAN_CTRL is not set
# end of Wireless WAN
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
# CONFIG_MISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_IPMB=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
# CONFIG_HW_RANDOM_CCTRNG is not set
CONFIG_HW_RANDOM_XIPHERA=y
# CONFIG_DEVMEM is not set
CONFIG_TCG_TPM=y
# CONFIG_HW_RANDOM_TPM is not set
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C=y
# CONFIG_TCG_TIS_SYNQUACER is not set
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=y
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
CONFIG_I2C_MUX_LTC4306=y
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
# CONFIG_I2C_HIX5HD2 is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
# CONFIG_I2C_CADENCE is not set
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_NPCM is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIPERBOARD is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_CROS_EC_TUNNEL is not set
# CONFIG_I2C_FSI is not set
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
# CONFIG_SPI_AR934X is not set
# CONFIG_SPI_ATH79 is not set
# CONFIG_SPI_ARMADA_3700 is not set
# CONFIG_SPI_ASPEED_SMC is not set
# CONFIG_SPI_ATMEL is not set
# CONFIG_SPI_ATMEL_QUADSPI is not set
CONFIG_SPI_AXI_SPI_ENGINE=y
# CONFIG_SPI_BCM2835 is not set
# CONFIG_SPI_BCM2835AUX is not set
# CONFIG_SPI_BCM63XX is not set
# CONFIG_SPI_BCM63XX_HSSPI is not set
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
# CONFIG_SPI_CLPS711X is not set
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_MMIO=y
# CONFIG_SPI_DW_BT1 is not set
# CONFIG_SPI_EP93XX is not set
CONFIG_SPI_FSI=y
CONFIG_SPI_FSL_LPSPI=y
CONFIG_SPI_FSL_QUADSPI=y
# CONFIG_SPI_GXP is not set
# CONFIG_SPI_HISI_KUNPENG is not set
# CONFIG_SPI_HISI_SFC_V3XX is not set
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
# CONFIG_SPI_IMG_SPFI is not set
# CONFIG_SPI_IMX is not set
# CONFIG_SPI_INGENIC is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_JCORE is not set
# CONFIG_SPI_LP8841_RTC is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_FSL_DSPI is not set
# CONFIG_SPI_MESON_SPICC is not set
# CONFIG_SPI_MESON_SPIFC is not set
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
# CONFIG_SPI_MT65XX is not set
# CONFIG_SPI_MT7621 is not set
# CONFIG_SPI_MTK_NOR is not set
# CONFIG_SPI_NPCM_FIU is not set
# CONFIG_SPI_NPCM_PSPI is not set
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_OMAP_UWIRE is not set
# CONFIG_SPI_OMAP24XX is not set
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_OMAP_100K is not set
# CONFIG_SPI_ORION is not set
# CONFIG_SPI_PIC32 is not set
# CONFIG_SPI_PIC32_SQI is not set
CONFIG_SPI_PL022=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_ROCKCHIP_SFC is not set
# CONFIG_SPI_RSPI is not set
# CONFIG_SPI_QUP is not set
# CONFIG_SPI_S3C64XX is not set
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SH_MSIOF is not set
# CONFIG_SPI_SH is not set
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SLAVE_MT27XX is not set
# CONFIG_SPI_SPRD is not set
# CONFIG_SPI_SPRD_ADI is not set
CONFIG_SPI_STM32=y
# CONFIG_SPI_STM32_QSPI is not set
# CONFIG_SPI_ST_SSC4 is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_SUNPLUS_SP7021 is not set
# CONFIG_SPI_SYNQUACER is not set
CONFIG_SPI_MXIC=y
# CONFIG_SPI_TEGRA210_QUAD is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
# CONFIG_SPI_TEGRA20_SLINK is not set
# CONFIG_SPI_UNIPHIER is not set
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_XLP is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
# CONFIG_SPI_ZYNQ_QSPI is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
CONFIG_SPI_AMD=y
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPI_SLAVE=y
# CONFIG_SPI_SLAVE_TIME is not set
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
# CONFIG_PTP_1588_CLOCK_QORIQ is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AT91PIO4 is not set
# CONFIG_PINCTRL_BM1880 is not set
CONFIG_PINCTRL_CY8C95X0=y
# CONFIG_PINCTRL_DA850_PUPD is not set
CONFIG_PINCTRL_DA9062=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LPC18XX is not set
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_PALMAS is not set
# CONFIG_PINCTRL_PISTACHIO is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_ROCKCHIP is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX8MM=y
# CONFIG_PINCTRL_IMX8MN is not set
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
# CONFIG_PINCTRL_IMX8ULP is not set
# CONFIG_PINCTRL_IMXRT1050 is not set
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_IMXRT1170=y
#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON8=y
CONFIG_PINCTRL_MESON8B=y
CONFIG_PINCTRL_MESON8_PMX=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set
#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers
# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_CLPS711X is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_MXC=y
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_OMAP is not set
CONFIG_GPIO_PL061=y
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
CONFIG_GPIO_VF610=y
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_AMD_FCH is not set
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_BD71815 is not set
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
# CONFIG_HTC_EGPIO is not set
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_MADERA is not set
CONFIG_GPIO_MAX77650=y
# CONFIG_GPIO_PALMAS is not set
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_TC3589X is not set
# CONFIG_GPIO_TPS65086 is not set
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_XRA1403=y
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_APM_POWER=y
CONFIG_IP5XXX_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
# CONFIG_BATTERY_BQ27XXX_I2C is not set
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_LTC4162L=y
# CONFIG_CHARGER_MAX14577 is not set
CONFIG_CHARGER_DETECTOR_MAX14656=y
# CONFIG_CHARGER_MAX77650 is not set
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MAX8998=y
# CONFIG_CHARGER_QCOM_SMBB is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_BQ25980=y
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_RK817 is not set
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_CHARGER_UCS1002 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_BATTERY_UG3105=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
# CONFIG_MENF21BMC_WATCHDOG is not set
# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_WM831X_WATCHDOG=y
# CONFIG_WM8350_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_MLX_WDT=y
# CONFIG_SL28CPLD_WATCHDOG is not set
CONFIG_ARM_SP805_WATCHDOG=y
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_977_WATCHDOG is not set
CONFIG_FTWDT010_WATCHDOG=y
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_ORION_WATCHDOG is not set
CONFIG_RN5T618_WATCHDOG=y
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=y
# CONFIG_MAX77620_WATCHDOG is not set
CONFIG_IMX2_WDT=y
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=y
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
CONFIG_STM32_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
# CONFIG_SC520_WDT is not set
CONFIG_KEMPLD_WDT=y
# CONFIG_ATH79_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_UML_WATCHDOG is not set
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_SOC=y
# CONFIG_BCMA_DRIVER_MIPS is not set
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
# CONFIG_MFD_CS47L92 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
CONFIG_MFD_IQS62X=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_OCELOT=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_UCB1400_CORE=y
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
# CONFIG_MFD_SC27XX_PMIC is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
# end of STMicroelectronics STMPE Interface Drivers
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_STW481X is not set
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
CONFIG_MFD_QCOM_PM8008=y
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_MFD_INTEL_M10_BMC=y
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM800=y
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
# CONFIG_REGULATOR_AS3722 is not set
CONFIG_REGULATOR_ATC260X=y
# CONFIG_REGULATOR_BCM590XX is not set
CONFIG_REGULATOR_BD71815=y
# CONFIG_REGULATOR_BD71828 is not set
# CONFIG_REGULATOR_BD9571MWV is not set
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
# CONFIG_REGULATOR_CROS_EC is not set
CONFIG_REGULATOR_DA9062=y
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_FAN53880 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
# CONFIG_REGULATOR_HI6421V530 is not set
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX77620 is not set
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
# CONFIG_REGULATOR_MPQ7920 is not set
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
# CONFIG_REGULATOR_MT6332 is not set
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6397=y
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PF8X00 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
# CONFIG_REGULATOR_RK808 is not set
# CONFIG_REGULATOR_RN5T618 is not set
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_SC2731 is not set
# CONFIG_REGULATOR_SKY81452 is not set
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_STM32_BOOSTER=y
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY7636A=y
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_CEC_CORE=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
# CONFIG_VIDEO_VIVID_CEC is not set
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# end of Media drivers
#
# Media ancillary drivers
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA1997X=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_ADV748X is not set
CONFIG_VIDEO_ADV7604=y
# CONFIG_VIDEO_ADV7604_CEC is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
# CONFIG_VIDEO_BT866 is not set
CONFIG_VIDEO_ISL7998X=y
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
# CONFIG_VIDEO_TC358743_CEC is not set
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=y
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
CONFIG_VIDEO_ADV7170=y
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_ST_MIPID02=y
# CONFIG_VIDEO_THS7303 is not set
# end of Miscellaneous helper chips
#
# Media SPI Adapters
#
CONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=y
# CONFIG_MEDIA_TUNER_FC2580 is not set
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
#
# Tools to develop new frontends
#
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_KUNIT_TEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_GEM_DMA_HELPER=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=y
# end of ARM devices
# CONFIG_DRM_KMB_DISPLAY is not set
# CONFIG_DRM_RCAR_DU is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
# CONFIG_DRM_SHMOBILE is not set
# CONFIG_DRM_SUN4I is not set
# CONFIG_DRM_TILCDC is not set
# CONFIG_DRM_FSL_DCU is not set
# CONFIG_DRM_TEGRA is not set
CONFIG_DRM_STM=y
# CONFIG_DRM_STM_DSI is not set
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=y
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
CONFIG_DRM_PANEL_LG_LB035Q02=y
# CONFIG_DRM_PANEL_LG_LG4573 is not set
CONFIG_DRM_PANEL_NEC_NL8048HL11=y
CONFIG_DRM_PANEL_NEWVISION_NV3052C=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
CONFIG_DRM_PANEL_SITRONIX_ST7789V=y
CONFIG_DRM_PANEL_SONY_ACX565AKM=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
CONFIG_DRM_PANEL_TPO_TPG110=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
# CONFIG_DRM_CROS_EC_ANX7688 is not set
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_FSL_LDB=y
# CONFIG_DRM_ITE_IT6505 is not set
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
# CONFIG_DRM_TOSHIBA_TC358775 is not set
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# end of Display Interface Bridges
# CONFIG_DRM_VC4 is not set
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
# CONFIG_DRM_IMX_LCDIF is not set
# CONFIG_DRM_MESON is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_PANEL_MIPI_DBI=y
CONFIG_TINYDRM_HX8357D=y
CONFIG_TINYDRM_ILI9163=y
# CONFIG_TINYDRM_ILI9225 is not set
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_ILI9486=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
CONFIG_TINYDRM_ST7586=y
CONFIG_TINYDRM_ST7735R=y
# CONFIG_DRM_PL111 is not set
CONFIG_DRM_TIDSS=y
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_CLPS711X is not set
CONFIG_FB_IMX=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_ATMEL is not set
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_OMAP is not set
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_FB_OMAP2 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=y
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
# CONFIG_SND_USB_PODHD is not set
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_SOC_AMD_ACP=y
# CONFIG_SND_SOC_AMD_CZ_RT5645_MACH is not set
CONFIG_SND_AMD_ACP_CONFIG=y
# CONFIG_SND_SOC_APPLE_MCA is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_BCM2835_SOC_I2S is not set
# CONFIG_SND_SOC_CYGNUS is not set
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# CONFIG_SND_EP93XX_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_AUDMIX=y
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_XCVR=y
# CONFIG_SND_SOC_FSL_AUD2HTX is not set
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_FSL_RPMSG=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=y
# CONFIG_SND_JZ4740_SOC_I2S is not set
# CONFIG_SND_KIRKWOOD_SOC is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
# CONFIG_SND_SOC_MT8186 is not set
CONFIG_SND_SOC_MTK_BTCVSD=y
# CONFIG_SND_SOC_MT8195 is not set
#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
# CONFIG_SND_MESON_AXG_TDMIN is not set
# CONFIG_SND_MESON_AXG_TDMOUT is not set
# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
# CONFIG_SND_MESON_AXG_SPDIFOUT is not set
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
# CONFIG_SND_MESON_AXG_PDM is not set
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
# CONFIG_SND_MESON_G12A_TOACODEC is not set
# CONFIG_SND_MESON_G12A_TOHDMITX is not set
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms
# CONFIG_SND_MXS_SOC is not set
# CONFIG_SND_PXA2XX_SOC is not set
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
# CONFIG_SND_SOC_SAMSUNG is not set
#
# SoC Audio support for Renesas SoCs
#
# CONFIG_SND_SOC_SH4_FSI is not set
# CONFIG_SND_SOC_RCAR is not set
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
# CONFIG_SND_SOC_SPRD is not set
# CONFIG_SND_SOC_STI is not set
#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SAI=y
# CONFIG_SND_SOC_STM32_I2S is not set
CONFIG_SND_SOC_STM32_SPDIFRX=y
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
# CONFIG_SND_SUN4I_I2S is not set
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SUN50I_DMIC is not set
# end of Allwinner SoC Audio support
# CONFIG_SND_SOC_TEGRA is not set
#
# Audio support for Texas Instruments SoCs
#
#
# Texas Instruments DAI support for:
#
# CONFIG_SND_SOC_DAVINCI_ASP is not set
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
# CONFIG_SND_SOC_DAVINCI_VCIF is not set
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set
#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs
# CONFIG_SND_SOC_UNIPHIER is not set
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
# CONFIG_SND_SOC_ADAU1761_SPI is not set
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
# CONFIG_SND_SOC_ADAU7118_HW is not set
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_AW8738=y
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=y
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=y
# CONFIG_SND_SOC_CS35L36 is not set
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_SPI=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_SPI=y
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L73=y
# CONFIG_SND_SOC_CS42L83 is not set
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=y
# CONFIG_SND_SOC_JZ4740_CODEC is not set
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
# CONFIG_SND_SOC_JZ4760_CODEC is not set
# CONFIG_SND_SOC_JZ4770_CODEC is not set
CONFIG_SND_SOC_DA7213=y
# CONFIG_SND_SOC_DMIC is not set
CONFIG_SND_SOC_HDMI_CODEC=y
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8326=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
# CONFIG_SND_SOC_ES8328_SPI is not set
CONFIG_SND_SOC_GTM601=y
# CONFIG_SND_SOC_HDA is not set
# CONFIG_SND_SOC_ICS43432 is not set
CONFIG_SND_SOC_INNO_RK3036=y
# CONFIG_SND_SOC_LOCHNAGAR_SC is not set
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
# CONFIG_SND_SOC_MAX9867 is not set
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
# CONFIG_SND_SOC_MAX98373_SDW is not set
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
# CONFIG_SND_SOC_PCM179X_SPI is not set
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3060_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM5102A=y
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=y
# CONFIG_SND_SOC_RT5616 is not set
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
# CONFIG_SND_SOC_RT5659 is not set
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_SDW=y
# CONFIG_SND_SOC_RT700_SDW is not set
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
# CONFIG_SND_SOC_RT711_SDCA_SDW is not set
CONFIG_SND_SOC_RT715=y
CONFIG_SND_SOC_RT715_SDW=y
# CONFIG_SND_SOC_RT715_SDCA_SDW is not set
CONFIG_SND_SOC_RT9120=y
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SRC4XXX_I2C=y
CONFIG_SND_SOC_SRC4XXX=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS2562 is not set
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TAS5805M=y
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD938X=y
CONFIG_SND_SOC_WCD938X_SDW=y
CONFIG_SND_SOC_WM8510=y
# CONFIG_SND_SOC_WM8523 is not set
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
# CONFIG_SND_SOC_WM8731_I2C is not set
CONFIG_SND_SOC_WM8731_SPI=y
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=y
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
CONFIG_SND_SOC_WM8770=y
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8974 is not set
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_WSA883X=y
CONFIG_SND_SOC_ZL38060=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
# CONFIG_SND_SOC_MT6358 is not set
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8821=y
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HISTB is not set
# CONFIG_USB_XHCI_MTK is not set
# CONFIG_USB_XHCI_MVEBU is not set
# CONFIG_USB_XHCI_RCAR is not set
# CONFIG_USB_BRCMSTB is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
CONFIG_USB_EHCI_HCD_OMAP=y
# CONFIG_USB_EHCI_HCD_ORION is not set
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_MAX3421_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_CDNS_SUPPORT=y
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MTU3 is not set
# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_AM62=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=y
# CONFIG_BRCM_USB_PINMAP is not set
# CONFIG_USB_ONBOARD_HUB is not set
CONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_ISP1301_OMAP is not set
# CONFIG_KEYSTONE_USB_PHY is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
# CONFIG_USB_TEGRA_PHY is not set
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# CONFIG_JZ4770_PHY is not set
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
CONFIG_USB_FUSB300=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USB3 is not set
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_GADGET_XILINX=y
# CONFIG_USB_MAX3420_UDC is not set
# CONFIG_USB_ASPEED_UDC is not set
# CONFIG_USB_ASPEED_VHUB is not set
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_NCM=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_SUBSET=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_NCM=y
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
CONFIG_USB_CONFIGFS_F_MIDI=y
# CONFIG_USB_CONFIGFS_F_HID is not set
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FUNCTIONFS=y
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_USB_G_PRINTER=y
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_RAW_GADGET is not set
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
# CONFIG_TYPEC_RT1711H is not set
# CONFIG_TYPEC_TCPCI_MAXIM is not set
# CONFIG_TYPEC_FUSB302 is not set
CONFIG_TYPEC_UCSI=y
CONFIG_UCSI_CCG=y
# CONFIG_UCSI_STM32G0 is not set
CONFIG_TYPEC_TPS6598X=y
# CONFIG_TYPEC_ANX7411 is not set
# CONFIG_TYPEC_RT1719 is not set
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
# CONFIG_TYPEC_QCOM_PMIC is not set
CONFIG_TYPEC_WUSB3801=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
# CONFIG_LEDS_TURRIS_OMNIA is not set
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77650 is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set
#
# Flash and Torch LED drivers
#
# CONFIG_LEDS_AAT1290 is not set
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
# CONFIG_LEDS_SGM3140 is not set
#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
# CONFIG_LEDS_QCOM_LPG is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_AMBA_PL08X=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
CONFIG_DW_AXI_DMAC=y
# CONFIG_EP93XX_DMA is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_FSL_QDMA is not set
# CONFIG_IMG_MDC_DMA is not set
CONFIG_IMX_DMA=y
# CONFIG_IMX_SDMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOP_ADMA is not set
# CONFIG_K3_DMA is not set
# CONFIG_LPC18XX_DMAMUX is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_MX3_IPU is not set
CONFIG_NBPFAXI_DMA=y
CONFIG_PL330_DMA=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
# CONFIG_UNIPHIER_XDMAC is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_ADM is not set
# CONFIG_QCOM_BAM_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=y
# CONFIG_DW_DMAC is not set
# CONFIG_SF_PDMA is not set
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_IMG_ASCII_LCD=y
CONFIG_LCD2S=y
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_CHARLCD_BL_OFF=y
# CONFIG_CHARLCD_BL_ON is not set
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_VFIO=y
# CONFIG_VFIO_NOIOMMU is not set
# CONFIG_VFIO_PLATFORM is not set
# CONFIG_VFIO_MDEV is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_VDPA is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VDPA=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_VSOCK=y
# CONFIG_VHOST_VDPA is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
# CONFIG_COMEDI_BOND is not set
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
# CONFIG_COMEDI_SSV_DNP is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
# CONFIG_COMEDI_TESTS_NI_ROUTES is not set
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
# CONFIG_R8712U is not set
# CONFIG_OCTEON_ETHERNET is not set
# CONFIG_USB_EMXX is not set
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
#
# i.MX5/6/7/8 Media Sub devices
#
CONFIG_VIDEO_IMX7_CSI=y
# end of i.MX5/6/7/8 Media Sub devices
CONFIG_VIDEO_MAX96712=y
# CONFIG_VIDEO_MESON_VDEC is not set
# CONFIG_VIDEO_OMAP4 is not set
# CONFIG_VIDEO_ROCKCHIP_VDEC is not set
# CONFIG_VIDEO_SUNXI is not set
CONFIG_STAGING_MEDIA_DEPRECATED=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_STKWEBCAM=y
CONFIG_USB_ZR364XX=y
CONFIG_STAGING_BOARD=y
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
# CONFIG_FB_TFT_HX8357D is not set
CONFIG_FB_TFT_ILI9163=y
# CONFIG_FB_TFT_ILI9320 is not set
# CONFIG_FB_TFT_ILI9325 is not set
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
# CONFIG_FB_TFT_ILI9481 is not set
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
CONFIG_FB_TFT_RA8875=y
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
CONFIG_FB_TFT_SEPS525=y
# CONFIG_FB_TFT_SH1106 is not set
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
# CONFIG_FB_TFT_SSD1306 is not set
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
# CONFIG_FB_TFT_ST7735R is not set
# CONFIG_FB_TFT_ST7789V is not set
# CONFIG_FB_TFT_TINYLCD is not set
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
# CONFIG_GREYBUS_AUDIO is not set
# CONFIG_GREYBUS_BOOTROM is not set
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_LIGHT=y
# CONFIG_GREYBUS_LOG is not set
CONFIG_GREYBUS_LOOPBACK=y
# CONFIG_GREYBUS_POWER is not set
# CONFIG_GREYBUS_RAW is not set
CONFIG_GREYBUS_VIBRATOR=y
# CONFIG_GREYBUS_BRIDGED_PHY is not set
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_SND_BCM2835 is not set
# CONFIG_VIDEO_BCM2835 is not set
CONFIG_PI433=y
# CONFIG_XIL_AXIS_FIFO is not set
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_GOLDFISH=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
# CONFIG_CROS_EC_RPMSG is not set
# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CROS_EC_CHARDEV=y
# CONFIG_CROS_EC_LIGHTBAR is not set
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_DEBUGFS=y
# CONFIG_CROS_EC_SENSORHUB is not set
CONFIG_CROS_EC_SYSFS=y
# CONFIG_CROS_EC_TYPEC is not set
CONFIG_CROS_USBPD_LOGGER=y
CONFIG_CROS_USBPD_NOTIFY=y
# CONFIG_CROS_KUNIT is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
# CONFIG_CLK_SP810 is not set
CONFIG_CLK_VEXPRESS_OSC=y
# end of Clock driver for ARM Reference designs
# CONFIG_CLK_HSDK is not set
CONFIG_LMK04832=y
# CONFIG_COMMON_CLK_APPLE_NCO is not set
CONFIG_COMMON_CLK_MAX77686=y
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_HI655X is not set
# CONFIG_COMMON_CLK_SCMI is not set
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_BM1880 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=y
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_PALMAS is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
CONFIG_COMMON_CLK_RS9_PCIE=y
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_VC7=y
CONFIG_COMMON_CLK_STM32F=y
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_STUB_CLK_HI6220 is not set
# CONFIG_STUB_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_MXC_CLK=y
# CONFIG_CLK_IMX8MM is not set
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
# CONFIG_CLK_IMX8MQ is not set
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y
CONFIG_CLK_IMXRT1050=y
#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers
# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set
#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC
#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON8B=y
# end of Clock support for Amlogic platforms
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_COMMON_CLK_ZYNQMP is not set
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
# CONFIG_HWSPINLOCK_OMAP is not set
# CONFIG_HWSPINLOCK_QCOM is not set
# CONFIG_HWSPINLOCK_SPRD is not set
# CONFIG_HWSPINLOCK_STM32 is not set
# CONFIG_HWSPINLOCK_SUN6I is not set
# CONFIG_HSEM_U8500 is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_ROCKCHIP_TIMER is not set
# CONFIG_ARMADA_370_XP_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_ORION_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_NOMADIK_MTU is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_KEYSTONE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_LPC32XX is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
CONFIG_CLKSRC_STM32=y
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_GLOBAL_TIMER is not set
# CONFIG_ARM_TIMER_SP804 is not set
CONFIG_ARMV7M_SYSTICK=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_ATMEL_TCB_CLKSRC is not set
# CONFIG_CLKSRC_EXYNOS_MCT is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SPRD_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_QCOM is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
CONFIG_CLKSRC_IMX_GPT=y
# CONFIG_CLKSRC_IMX_TPM is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MILBEAUT_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_ARM_MHU_V2=y
# CONFIG_IMX_MBOX is not set
# CONFIG_PLATFORM_MHU is not set
# CONFIG_PL320_MBOX is not set
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_HI3660_MBOX is not set
# CONFIG_HI6220_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
CONFIG_STM32_RPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_QCOM is not set
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_OWL_PM_DOMAINS is not set
#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_GX_PM_DOMAINS is not set
# CONFIG_MESON_EE_PM_DOMAINS is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Apple SoC drivers
#
# CONFIG_APPLE_PMGR_PWRSTATE is not set
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers
#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers
# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set
#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
CONFIG_FSL_RCPM=y
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
CONFIG_SOC_IMX8M=y
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_SCPSYS_PM_DOMAINS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_AOSS_QMP is not set
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMEM is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_ROCKCHIP_PM_DOMAINS is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
CONFIG_SOC_TI=y
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_IMX_BUS_DEVFREQ=y
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
# CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU is not set
# CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=y
# CONFIG_EXTCON_USBC_TUSB320 is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_ATMEL is not set
CONFIG_PWM_ATMEL_TCB=y
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
CONFIG_PWM_CROS_EC=y
# CONFIG_PWM_EP93XX is not set
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
CONFIG_PWM_IMX1=y
# CONFIG_PWM_IMX27 is not set
CONFIG_PWM_IMX_TPM=y
# CONFIG_PWM_INTEL_LGM is not set
CONFIG_PWM_IQS620A=y
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
CONFIG_PWM_NTXEC=y
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_STMPE is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
CONFIG_PWM_XILINX=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_NVIC=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
CONFIG_XILINX_INTC=y
# CONFIG_INGENIC_TCU_IRQ is not set
CONFIG_STM32_EXTI=y
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
# CONFIG_RESET_SIMPLE is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
CONFIG_RESET_TI_TPS380X=y
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_EXYNOS5_USBDRD=y
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
CONFIG_PHY_STM32_USBPHYC=y
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_DM816X_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_IDLE_INJECT is not set
CONFIG_DTPM=y
CONFIG_MCB=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
CONFIG_ARM_CCN=y
# CONFIG_ARM_CMN is not set
# CONFIG_ARM_PMU is not set
CONFIG_FSL_IMX8_DDR_PMU=y
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
#
# Android
#
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
CONFIG_NVMEM_IMX_OCOTP=y
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
CONFIG_NVMEM_U_BOOT_ENV=y
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set
#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_GTH is not set
# CONFIG_INTEL_TH_STH is not set
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_ASPEED=y
# CONFIG_FSI_SCOM is not set
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
CONFIG_COUNTER=y
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=y
# CONFIG_STM32_TIMER_CNT is not set
CONFIG_STM32_LPTIMER_CNT=y
# CONFIG_TI_EQEP is not set
CONFIG_FTM_QUADDEC=y
# CONFIG_MICROCHIP_TCB_CAPTURE is not set
# CONFIG_TI_ECAP_CAPTURE is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
# CONFIG_OVERLAY_FS_NFS_EXPORT is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_DEBUG is not set
# end of Caches
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
CONFIG_CC_HAS_RANDSTRUCT=y
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_VMAC is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (arm)
#
# CONFIG_CRYPTO_POLY1305_ARM is not set
# CONFIG_CRYPTO_BLAKE2S_ARM is not set
CONFIG_CRYPTO_SHA1_ARM=y
CONFIG_CRYPTO_AES_ARM=y
# CONFIG_CRYPTO_CHACHA20_NEON is not set
# end of Accelerated Cryptographic Algorithms for CPU (arm)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ALLWINNER is not set
# CONFIG_CRYPTO_DEV_SL3516 is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG=y
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
# CONFIG_CRYPTO_DEV_SAHARA is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
# CONFIG_CRYPTO_DEV_MXS_DCP is not set
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_STM32_CRC=y
CONFIG_CRYPTO_DEV_STM32_HASH=y
# CONFIG_CRYPTO_DEV_STM32_CRYP is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_ARTPEC6 is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking
#
# Library routines
#
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_GLOBAL_POOL=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_STACKDEPOT=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_DEBUG_INFO_DWARF5=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_PAHOLE_HAS_BTF_TAG=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_VMLINUX_MAP=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_SLUB_DEBUG is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_SCF_TORTURE_TEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set
#
# arm Debugging
#
CONFIG_UNWINDER_ARM=y
CONFIG_ARM_UNWIND=y
CONFIG_BACKTRACE_VERBOSE=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_LINKS_AND_SINKS=y
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
CONFIG_CORESIGHT_CATU=y
CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y
# CONFIG_CORESIGHT_SOURCE_ETM3X is not set
CONFIG_CORESIGHT_STM=y
CONFIG_CORESIGHT_CPU_DEBUG=y
CONFIG_CORESIGHT_CPU_DEBUG_DEFAULT_ON=y
CONFIG_CORESIGHT_CTI=y
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS=y
# end of arm Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 16:06 ` Mina Almasry
@ 2022-12-06 19:55 ` Michal Hocko
2022-12-07 1:22 ` Huang, Ying
2022-12-07 1:55 ` Mina Almasry
0 siblings, 2 replies; 24+ messages in thread
From: Michal Hocko @ 2022-12-06 19:55 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Tue 06-12-22 08:06:51, Mina Almasry wrote:
> On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> > > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > > to do, however, it introduced a regression in the behavior of
> > > try_to_free_mem_cgroup_pages().
> > >
> > > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > > of the cgroup should reduce by nr_pages. The callers expect
> > > try_to_free_mem_cgroup_pages() to also return the number of pages
> > > reclaimed, not demoted.
> > >
> > > However, what try_to_free_mem_cgroup_pages() actually does is it
> > > unconditionally counts demoted pages as reclaimed pages. So in practice
> > > when it is called it will often demote nr_pages and return the number of
> > > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > > callers want it to do.
> > >
> > > Various things work suboptimally on memory tiered systems or don't work
> > > at all due to this:
> > >
> > > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > > instead of lowering the memcg usage by nr_pages).
> > > - try_charge_memcg() will keep retrying the charge while
> > > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > > making any room for the charge.
> >
> > This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
> >
>
> Ah, I did indeed miss this. Thanks for the pointer. However I don't
> understand this bit from your email (sorry I'm probably missing
> something):
>
> "I suspect this is rather unlikely situation, though. The last tear
> (without any fallback) should have some memory to reclaim most of
> the time."
>
> Reading the code in try_charge_memcg(), I don't see the last retry for
> try_to_free_mem_cgroup_pages() do anything special. My concern here is
> that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
> MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
> report back that it was able to 'reclaim' memory, but the charge keeps
> failing because the memcg reclaim didn't actually make room for the
> charge. What happens in this case? My understanding is that the memcg
> oom-killer gets wrongly invoked.
The memcg reclaim shrinks from all zones in the allowed zonelist. In
general from all nodes. So unless the lower tier is outside of this
zonelist then there is a zone to reclaim from which cannot demote.
Correct?
> > > - memory.reclaim has a wonky interface. It advertises to the user it
> > > reclaims the provided amount but it will actually often demote that
> > > amount.
> > >
> > > There may be more effects to this issue.
> > >
> > > To fix these issues I propose shrink_folio_list() to only count pages
> > > demoted from inside of sc->nodemask to outside of sc->nodemask as
> > > 'reclaimed'.
> >
> > Could you expand on why the node mask matters? From the charge point of
> > view it should be completely uninteresting as the charge remains.
> >
> > I suspect we really need to change to reclaim metrics for memcg reclaim.
> > In the memory balancing reclaim we can indeed consider demotions as a
> > reclaim because the memory is freed in the end but for the memcg reclaim
> > we really should be counting discharges instead. No demotion/migration will
> > free up charges.
>
> I think what you're describing is exactly what this patch aims to do.
> I'm proposing an interface change to shrink_folio_list() such that it
> only counts demoted pages as reclaimed iff sc->nodemask is provided by
> the caller and the demotion removed pages from inside sc->nodemask to
> outside sc->nodemask. In this case:
>
> 1. memory balancing reclaim would pass sc->nodemask=nid to
> shrink_folio_list() indicating that it should count pages demoted from
> sc->nodemask as reclaimed.
>
> 2. memcg reclaim would pass sc->nodemask=NULL to shrink_folio_list()
> indicating that it is looking for reclaim across all nodes and no
> demoted pages should count as reclaimed.
>
> Sorry if the commit message was not clear. I can try making it clearer
> in the next version but it's already very long.
Either I am missing something or I simply do not understand why you are
hooked into nodemask so much. Why cannot we have a simple rule that
only global reclaim considers demotions as nr_reclaimed?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 19:55 ` Michal Hocko
@ 2022-12-07 1:22 ` Huang, Ying
2022-12-07 1:55 ` Mina Almasry
1 sibling, 0 replies; 24+ messages in thread
From: Huang, Ying @ 2022-12-07 1:22 UTC (permalink / raw)
To: Michal Hocko
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
Michal Hocko <mhocko@suse.com> writes:
> On Tue 06-12-22 08:06:51, Mina Almasry wrote:
>> On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
>> >
>> > On Mon 05-12-22 18:34:05, Mina Almasry wrote:
>> > > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
>> > > reclaim"") enabled demotion in memcg reclaim, which is the right thing
>> > > to do, however, it introduced a regression in the behavior of
>> > > try_to_free_mem_cgroup_pages().
>> > >
>> > > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
>> > > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
>> > > of the cgroup should reduce by nr_pages. The callers expect
>> > > try_to_free_mem_cgroup_pages() to also return the number of pages
>> > > reclaimed, not demoted.
>> > >
>> > > However, what try_to_free_mem_cgroup_pages() actually does is it
>> > > unconditionally counts demoted pages as reclaimed pages. So in practice
>> > > when it is called it will often demote nr_pages and return the number of
>> > > demoted pages to the caller. Demoted pages don't lower the memcg usage,
>> > > and so try_to_free_mem_cgroup_pages() is not actually doing what the
>> > > callers want it to do.
>> > >
>> > > Various things work suboptimally on memory tiered systems or don't work
>> > > at all due to this:
>> > >
>> > > - memory.high enforcement likely doesn't work (it just demotes nr_pages
>> > > instead of lowering the memcg usage by nr_pages).
>> > > - try_charge_memcg() will keep retrying the charge while
>> > > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
>> > > making any room for the charge.
>> >
>> > This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
>> >
>>
>> Ah, I did indeed miss this. Thanks for the pointer. However I don't
>> understand this bit from your email (sorry I'm probably missing
>> something):
>>
>> "I suspect this is rather unlikely situation, though. The last tear
>> (without any fallback) should have some memory to reclaim most of
>> the time."
>>
>> Reading the code in try_charge_memcg(), I don't see the last retry for
>> try_to_free_mem_cgroup_pages() do anything special. My concern here is
>> that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
>> MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
>> report back that it was able to 'reclaim' memory, but the charge keeps
>> failing because the memcg reclaim didn't actually make room for the
>> charge. What happens in this case? My understanding is that the memcg
>> oom-killer gets wrongly invoked.
>
> The memcg reclaim shrinks from all zones in the allowed zonelist. In
> general from all nodes. So unless the lower tier is outside of this
> zonelist then there is a zone to reclaim from which cannot demote.
> Correct?
>
>> > > - memory.reclaim has a wonky interface. It advertises to the user it
>> > > reclaims the provided amount but it will actually often demote that
>> > > amount.
>> > >
>> > > There may be more effects to this issue.
>> > >
>> > > To fix these issues I propose shrink_folio_list() to only count pages
>> > > demoted from inside of sc->nodemask to outside of sc->nodemask as
>> > > 'reclaimed'.
>> >
>> > Could you expand on why the node mask matters? From the charge point of
>> > view it should be completely uninteresting as the charge remains.
>> >
>> > I suspect we really need to change to reclaim metrics for memcg reclaim.
>> > In the memory balancing reclaim we can indeed consider demotions as a
>> > reclaim because the memory is freed in the end but for the memcg reclaim
>> > we really should be counting discharges instead. No demotion/migration will
>> > free up charges.
>>
>> I think what you're describing is exactly what this patch aims to do.
>> I'm proposing an interface change to shrink_folio_list() such that it
>> only counts demoted pages as reclaimed iff sc->nodemask is provided by
>> the caller and the demotion removed pages from inside sc->nodemask to
>> outside sc->nodemask. In this case:
>>
>> 1. memory balancing reclaim would pass sc->nodemask=nid to
>> shrink_folio_list() indicating that it should count pages demoted from
>> sc->nodemask as reclaimed.
>>
>> 2. memcg reclaim would pass sc->nodemask=NULL to shrink_folio_list()
>> indicating that it is looking for reclaim across all nodes and no
>> demoted pages should count as reclaimed.
>>
>> Sorry if the commit message was not clear. I can try making it clearer
>> in the next version but it's already very long.
>
> Either I am missing something or I simply do not understand why you are
> hooked into nodemask so much. Why cannot we have a simple rule that
> only global reclaim considers demotions as nr_reclaimed?
Yes. This sounds reasonable to me and this simplify the logic greatly!
Best Regards,
Huang, Ying
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-06 19:55 ` Michal Hocko
2022-12-07 1:22 ` Huang, Ying
@ 2022-12-07 1:55 ` Mina Almasry
2022-12-07 11:12 ` Michal Hocko
1 sibling, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-07 1:55 UTC (permalink / raw)
To: Michal Hocko
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Tue, Dec 6, 2022 at 11:55 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Tue 06-12-22 08:06:51, Mina Almasry wrote:
> > On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
> > >
> > > On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> > > > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > > > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > > > to do, however, it introduced a regression in the behavior of
> > > > try_to_free_mem_cgroup_pages().
> > > >
> > > > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > > > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > > > of the cgroup should reduce by nr_pages. The callers expect
> > > > try_to_free_mem_cgroup_pages() to also return the number of pages
> > > > reclaimed, not demoted.
> > > >
> > > > However, what try_to_free_mem_cgroup_pages() actually does is it
> > > > unconditionally counts demoted pages as reclaimed pages. So in practice
> > > > when it is called it will often demote nr_pages and return the number of
> > > > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > > > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > > > callers want it to do.
> > > >
> > > > Various things work suboptimally on memory tiered systems or don't work
> > > > at all due to this:
> > > >
> > > > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > > > instead of lowering the memcg usage by nr_pages).
> > > > - try_charge_memcg() will keep retrying the charge while
> > > > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > > > making any room for the charge.
> > >
> > > This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
> > >
> >
> > Ah, I did indeed miss this. Thanks for the pointer. However I don't
> > understand this bit from your email (sorry I'm probably missing
> > something):
> >
> > "I suspect this is rather unlikely situation, though. The last tear
> > (without any fallback) should have some memory to reclaim most of
> > the time."
> >
> > Reading the code in try_charge_memcg(), I don't see the last retry for
> > try_to_free_mem_cgroup_pages() do anything special. My concern here is
> > that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
> > MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
> > report back that it was able to 'reclaim' memory, but the charge keeps
> > failing because the memcg reclaim didn't actually make room for the
> > charge. What happens in this case? My understanding is that the memcg
> > oom-killer gets wrongly invoked.
>
> The memcg reclaim shrinks from all zones in the allowed zonelist. In
> general from all nodes. So unless the lower tier is outside of this
> zonelist then there is a zone to reclaim from which cannot demote.
> Correct?
>
Ah, thanks for pointing this out. I did indeed miss that the memcg
reclaim tries to apply pressure equally to all the nodes. With some
additional testing I'm able to see what you said: there could be no
premature oom kill invocation because generally the memcg reclaim will
find some pages to reclaim from lower tier nodes.
I do find that the first call to try_to_free_mem_cgroup_pages()
sometimes will mostly demote and not do much reclaim. I haven't been
able to fully track the cause of that down but I suspect that the
first call in my test will find most of the cgroup's memory on top
tier nodes. However we do retry a bunch of times before we invoke oom,
and in my testing subsequent calls will find plenty of memory in the
lower tier nodes that it can reclaim. I'll update the commit message
in the next version.
> > > > - memory.reclaim has a wonky interface. It advertises to the user it
> > > > reclaims the provided amount but it will actually often demote that
> > > > amount.
> > > >
> > > > There may be more effects to this issue.
> > > >
> > > > To fix these issues I propose shrink_folio_list() to only count pages
> > > > demoted from inside of sc->nodemask to outside of sc->nodemask as
> > > > 'reclaimed'.
> > >
> > > Could you expand on why the node mask matters? From the charge point of
> > > view it should be completely uninteresting as the charge remains.
> > >
> > > I suspect we really need to change to reclaim metrics for memcg reclaim.
> > > In the memory balancing reclaim we can indeed consider demotions as a
> > > reclaim because the memory is freed in the end but for the memcg reclaim
> > > we really should be counting discharges instead. No demotion/migration will
> > > free up charges.
> >
> > I think what you're describing is exactly what this patch aims to do.
> > I'm proposing an interface change to shrink_folio_list() such that it
> > only counts demoted pages as reclaimed iff sc->nodemask is provided by
> > the caller and the demotion removed pages from inside sc->nodemask to
> > outside sc->nodemask. In this case:
> >
> > 1. memory balancing reclaim would pass sc->nodemask=nid to
> > shrink_folio_list() indicating that it should count pages demoted from
> > sc->nodemask as reclaimed.
> >
> > 2. memcg reclaim would pass sc->nodemask=NULL to shrink_folio_list()
> > indicating that it is looking for reclaim across all nodes and no
> > demoted pages should count as reclaimed.
> >
> > Sorry if the commit message was not clear. I can try making it clearer
> > in the next version but it's already very long.
>
> Either I am missing something or I simply do not understand why you are
> hooked into nodemask so much. Why cannot we have a simple rule that
> only global reclaim considers demotions as nr_reclaimed?
>
Thanks. I think this approach would work for most callers. My issue
here is properly supporting the recently added nodes= arg[1] to
memory.reclaim. If the user specifies all nodes or provides no arg,
I'd like to treat it as memcg reclaim which doesn't count demotions.
If the user provides the top tier nodes, I would like to count
demotions as this interface is the way to trigger proactive demotion
from top tier nodes.
I guess I can check which args the user is passing and decide whether
or not to count demotions. But the user right now can specify any
combination of nodes, some of them top tier, some lower tier, some in
the middle. I can return -EINVAL for that, but that seems like a
shame. I thought a generic way to address this was what I'm doing
here, i.e. counting pages demoted from the nodemask as reclaimed. Is
that not acceptable? Is -EINVAL preferred here?
[1] https://lore.kernel.org/linux-mm/87tu2a1v3y.fsf@yhuang6-desk2.ccr.corp.intel.com/
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-07 1:55 ` Mina Almasry
@ 2022-12-07 11:12 ` Michal Hocko
2022-12-07 21:43 ` Mina Almasry
0 siblings, 1 reply; 24+ messages in thread
From: Michal Hocko @ 2022-12-07 11:12 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Tue 06-12-22 17:55:58, Mina Almasry wrote:
> On Tue, Dec 6, 2022 at 11:55 AM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Tue 06-12-22 08:06:51, Mina Almasry wrote:
> > > On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
> > > >
> > > > On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> > > > > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > > > > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > > > > to do, however, it introduced a regression in the behavior of
> > > > > try_to_free_mem_cgroup_pages().
> > > > >
> > > > > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > > > > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > > > > of the cgroup should reduce by nr_pages. The callers expect
> > > > > try_to_free_mem_cgroup_pages() to also return the number of pages
> > > > > reclaimed, not demoted.
> > > > >
> > > > > However, what try_to_free_mem_cgroup_pages() actually does is it
> > > > > unconditionally counts demoted pages as reclaimed pages. So in practice
> > > > > when it is called it will often demote nr_pages and return the number of
> > > > > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > > > > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > > > > callers want it to do.
> > > > >
> > > > > Various things work suboptimally on memory tiered systems or don't work
> > > > > at all due to this:
> > > > >
> > > > > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > > > > instead of lowering the memcg usage by nr_pages).
> > > > > - try_charge_memcg() will keep retrying the charge while
> > > > > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > > > > making any room for the charge.
> > > >
> > > > This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
> > > >
> > >
> > > Ah, I did indeed miss this. Thanks for the pointer. However I don't
> > > understand this bit from your email (sorry I'm probably missing
> > > something):
> > >
> > > "I suspect this is rather unlikely situation, though. The last tear
> > > (without any fallback) should have some memory to reclaim most of
> > > the time."
> > >
> > > Reading the code in try_charge_memcg(), I don't see the last retry for
> > > try_to_free_mem_cgroup_pages() do anything special. My concern here is
> > > that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
> > > MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
> > > report back that it was able to 'reclaim' memory, but the charge keeps
> > > failing because the memcg reclaim didn't actually make room for the
> > > charge. What happens in this case? My understanding is that the memcg
> > > oom-killer gets wrongly invoked.
> >
> > The memcg reclaim shrinks from all zones in the allowed zonelist. In
> > general from all nodes. So unless the lower tier is outside of this
> > zonelist then there is a zone to reclaim from which cannot demote.
> > Correct?
> >
>
> Ah, thanks for pointing this out. I did indeed miss that the memcg
> reclaim tries to apply pressure equally to all the nodes. With some
> additional testing I'm able to see what you said: there could be no
> premature oom kill invocation because generally the memcg reclaim will
> find some pages to reclaim from lower tier nodes.
>
> I do find that the first call to try_to_free_mem_cgroup_pages()
> sometimes will mostly demote and not do much reclaim. I haven't been
> able to fully track the cause of that down but I suspect that the
> first call in my test will find most of the cgroup's memory on top
> tier nodes. However we do retry a bunch of times before we invoke oom,
> and in my testing subsequent calls will find plenty of memory in the
> lower tier nodes that it can reclaim. I'll update the commit message
> in the next version.
In the past we used to break out early from the memcg reclaim if the
reclaim target has been completed - see 1ba6fc9af35b ("mm: vmscan: do
not share cgroup iteration between reclaimers"). But I do not see early
break from the reclaim anywhere anymore so the precise nr_reclaimed
tracking shouldn't make a lot of difference. There are cases where we
really have hard time to find proper candidates and need to dip into
hogher reclaim priorities though.
Anyway a proper nr_reclaimed tracking should be rather straightforward
but I do not expect to make a big difference in practice
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 026199c047e0..1b7f2d8cb128 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
LIST_HEAD(ret_folios);
LIST_HEAD(free_folios);
LIST_HEAD(demote_folios);
- unsigned int nr_reclaimed = 0;
+ unsigned int nr_reclaimed = 0, nr_demoted = 0;
unsigned int pgactivate = 0;
bool do_demote_pass;
struct swap_iocb *plug = NULL;
@@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
}
/* 'folio_list' is always empty here */
- /* Migrate folios selected for demotion */
- nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
+ /*
+ * Migrate folios selected for demotion.
+ * Do not consider demoted pages to be reclaimed for the memcg reclaim
+ * because no charges are really freed during the migration. Global
+ * reclaim aims at releasing memory from nodes/zones so consider
+ * demotion to reclaim memory.
+ */
+ nr_demoted += demote_folio_list(&demote_folios, pgdat);
+ if (!cgroup_reclaim(sc))
+ nr_reclaimed += nr_demoted;
+
/* Folios that could not be demoted are still in @demote_folios */
if (!list_empty(&demote_folios)) {
/* Folios which weren't demoted go back on @folio_list for retry: */
[...]
> > Either I am missing something or I simply do not understand why you are
> > hooked into nodemask so much. Why cannot we have a simple rule that
> > only global reclaim considers demotions as nr_reclaimed?
> >
>
> Thanks. I think this approach would work for most callers. My issue
> here is properly supporting the recently added nodes= arg[1] to
> memory.reclaim. If the user specifies all nodes or provides no arg,
> I'd like to treat it as memcg reclaim which doesn't count demotions.
> If the user provides the top tier nodes, I would like to count
> demotions as this interface is the way to trigger proactive demotion
> from top tier nodes.
Sorry to repeat myself but nodemask doesn't really make any difference.
The reclaim should only count pages which really free memory in the
domain. Even if you demote to a node outside of the given nodemask then
the charge stays with the existing memcg so it is rather dubious to
count it as a reclaimed page. Or do I still miss what you are trying to
achieve?
--
Michal Hocko
SUSE Labs
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-07 11:12 ` Michal Hocko
@ 2022-12-07 21:43 ` Mina Almasry
2022-12-08 8:09 ` Michal Hocko
0 siblings, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-07 21:43 UTC (permalink / raw)
To: Michal Hocko
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Wed, Dec 7, 2022 at 3:12 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Tue 06-12-22 17:55:58, Mina Almasry wrote:
> > On Tue, Dec 6, 2022 at 11:55 AM Michal Hocko <mhocko@suse.com> wrote:
> > >
> > > On Tue 06-12-22 08:06:51, Mina Almasry wrote:
> > > > On Tue, Dec 6, 2022 at 4:20 AM Michal Hocko <mhocko@suse.com> wrote:
> > > > >
> > > > > On Mon 05-12-22 18:34:05, Mina Almasry wrote:
> > > > > > commit 3f1509c57b1b ("Revert "mm/vmscan: never demote for memcg
> > > > > > reclaim"") enabled demotion in memcg reclaim, which is the right thing
> > > > > > to do, however, it introduced a regression in the behavior of
> > > > > > try_to_free_mem_cgroup_pages().
> > > > > >
> > > > > > The callers of try_to_free_mem_cgroup_pages() expect it to attempt to
> > > > > > reclaim - not demote - nr_pages from the cgroup. I.e. the memory usage
> > > > > > of the cgroup should reduce by nr_pages. The callers expect
> > > > > > try_to_free_mem_cgroup_pages() to also return the number of pages
> > > > > > reclaimed, not demoted.
> > > > > >
> > > > > > However, what try_to_free_mem_cgroup_pages() actually does is it
> > > > > > unconditionally counts demoted pages as reclaimed pages. So in practice
> > > > > > when it is called it will often demote nr_pages and return the number of
> > > > > > demoted pages to the caller. Demoted pages don't lower the memcg usage,
> > > > > > and so try_to_free_mem_cgroup_pages() is not actually doing what the
> > > > > > callers want it to do.
> > > > > >
> > > > > > Various things work suboptimally on memory tiered systems or don't work
> > > > > > at all due to this:
> > > > > >
> > > > > > - memory.high enforcement likely doesn't work (it just demotes nr_pages
> > > > > > instead of lowering the memcg usage by nr_pages).
> > > > > > - try_charge_memcg() will keep retrying the charge while
> > > > > > try_to_free_mem_cgroup_pages() is just demoting pages and not actually
> > > > > > making any room for the charge.
> > > > >
> > > > > This has been brought up during the review https://lore.kernel.org/all/YoYTEDD+c4GT0xYY@dhcp22.suse.cz/
> > > > >
> > > >
> > > > Ah, I did indeed miss this. Thanks for the pointer. However I don't
> > > > understand this bit from your email (sorry I'm probably missing
> > > > something):
> > > >
> > > > "I suspect this is rather unlikely situation, though. The last tear
> > > > (without any fallback) should have some memory to reclaim most of
> > > > the time."
> > > >
> > > > Reading the code in try_charge_memcg(), I don't see the last retry for
> > > > try_to_free_mem_cgroup_pages() do anything special. My concern here is
> > > > that try_charge_memcg() calls try_to_free_mem_cgroup_pages()
> > > > MAX_RECLAIM_RETRIES times. Each time that call may demote pages and
> > > > report back that it was able to 'reclaim' memory, but the charge keeps
> > > > failing because the memcg reclaim didn't actually make room for the
> > > > charge. What happens in this case? My understanding is that the memcg
> > > > oom-killer gets wrongly invoked.
> > >
> > > The memcg reclaim shrinks from all zones in the allowed zonelist. In
> > > general from all nodes. So unless the lower tier is outside of this
> > > zonelist then there is a zone to reclaim from which cannot demote.
> > > Correct?
> > >
> >
> > Ah, thanks for pointing this out. I did indeed miss that the memcg
> > reclaim tries to apply pressure equally to all the nodes. With some
> > additional testing I'm able to see what you said: there could be no
> > premature oom kill invocation because generally the memcg reclaim will
> > find some pages to reclaim from lower tier nodes.
> >
> > I do find that the first call to try_to_free_mem_cgroup_pages()
> > sometimes will mostly demote and not do much reclaim. I haven't been
> > able to fully track the cause of that down but I suspect that the
> > first call in my test will find most of the cgroup's memory on top
> > tier nodes. However we do retry a bunch of times before we invoke oom,
> > and in my testing subsequent calls will find plenty of memory in the
> > lower tier nodes that it can reclaim. I'll update the commit message
> > in the next version.
>
> In the past we used to break out early from the memcg reclaim if the
> reclaim target has been completed - see 1ba6fc9af35b ("mm: vmscan: do
> not share cgroup iteration between reclaimers"). But I do not see early
> break from the reclaim anywhere anymore so the precise nr_reclaimed
> tracking shouldn't make a lot of difference. There are cases where we
> really have hard time to find proper candidates and need to dip into
> hogher reclaim priorities though.
>
Yes, I agree. Thank you for your patient explanation. I now see why
precise accounting of nr_reclaimed is not an issue (or at least as big
an issue as I once thought).
> Anyway a proper nr_reclaimed tracking should be rather straightforward
> but I do not expect to make a big difference in practice
>
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 026199c047e0..1b7f2d8cb128 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> LIST_HEAD(ret_folios);
> LIST_HEAD(free_folios);
> LIST_HEAD(demote_folios);
> - unsigned int nr_reclaimed = 0;
> + unsigned int nr_reclaimed = 0, nr_demoted = 0;
> unsigned int pgactivate = 0;
> bool do_demote_pass;
> struct swap_iocb *plug = NULL;
> @@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> }
> /* 'folio_list' is always empty here */
>
> - /* Migrate folios selected for demotion */
> - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> + /*
> + * Migrate folios selected for demotion.
> + * Do not consider demoted pages to be reclaimed for the memcg reclaim
> + * because no charges are really freed during the migration. Global
> + * reclaim aims at releasing memory from nodes/zones so consider
> + * demotion to reclaim memory.
> + */
> + nr_demoted += demote_folio_list(&demote_folios, pgdat);
> + if (!cgroup_reclaim(sc))
> + nr_reclaimed += nr_demoted;
> +
> /* Folios that could not be demoted are still in @demote_folios */
> if (!list_empty(&demote_folios)) {
> /* Folios which weren't demoted go back on @folio_list for retry: */
>
> [...]
Thank you again, but this patch breaks the memory.reclaim nodes arg
for me. This is my test case. I run it on a machine with 2 memory
tiers.
Memory tier 1= nodes 0-2
Memory tier 2= node 3
mkdir -p /sys/fs/cgroup/unified/test
cd /sys/fs/cgroup/unified/test
echo $$ > cgroup.procs
head -c 500m /dev/random > /tmp/testfile
echo $$ > /sys/fs/cgroup/unified/cgroup.procs
echo "1m nodes=0-2" > memory.reclaim
In my opinion the expected behavior is for the kernel to demote 1mb of
memory from nodes 0-2 to node 3.
Actual behavior on the tip of mm-unstable is as expected.
Actual behavior with your patch cherry-picked to mm-unstable is that
the kernel demotes all 500mb of memory from nodes 0-2 to node 3, and
returns -EAGAIN to the user. This may be the correct behavior you're
intending, but it completely breaks the use case I implemented the
nodes= arg for and listed on the commit message of that change.
> > > Either I am missing something or I simply do not understand why you are
> > > hooked into nodemask so much. Why cannot we have a simple rule that
> > > only global reclaim considers demotions as nr_reclaimed?
> > >
> >
> > Thanks. I think this approach would work for most callers. My issue
> > here is properly supporting the recently added nodes= arg[1] to
> > memory.reclaim. If the user specifies all nodes or provides no arg,
> > I'd like to treat it as memcg reclaim which doesn't count demotions.
> > If the user provides the top tier nodes, I would like to count
> > demotions as this interface is the way to trigger proactive demotion
> > from top tier nodes.
>
> Sorry to repeat myself but nodemask doesn't really make any difference.
> The reclaim should only count pages which really free memory in the
> domain. Even if you demote to a node outside of the given nodemask then
> the charge stays with the existing memcg so it is rather dubious to
> count it as a reclaimed page. Or do I still miss what you are trying to
> achieve?
>
I think you've convinced me that the issue is not as serious as I
first thought, thanks. We can maybe abandon this fix? If we do want to
fix this now or in the future, if possible let the fix be compatible
with memory.reclaim and its nodes= arg. I'm happy to provide patches
for whatever fix you find acceptable.
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-07 21:43 ` Mina Almasry
@ 2022-12-08 8:09 ` Michal Hocko
2022-12-08 9:00 ` Mina Almasry
0 siblings, 1 reply; 24+ messages in thread
From: Michal Hocko @ 2022-12-08 8:09 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Wed 07-12-22 13:43:55, Mina Almasry wrote:
> On Wed, Dec 7, 2022 at 3:12 AM Michal Hocko <mhocko@suse.com> wrote:
[...]
> > Anyway a proper nr_reclaimed tracking should be rather straightforward
> > but I do not expect to make a big difference in practice
> >
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 026199c047e0..1b7f2d8cb128 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > LIST_HEAD(ret_folios);
> > LIST_HEAD(free_folios);
> > LIST_HEAD(demote_folios);
> > - unsigned int nr_reclaimed = 0;
> > + unsigned int nr_reclaimed = 0, nr_demoted = 0;
> > unsigned int pgactivate = 0;
> > bool do_demote_pass;
> > struct swap_iocb *plug = NULL;
> > @@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > }
> > /* 'folio_list' is always empty here */
> >
> > - /* Migrate folios selected for demotion */
> > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> > + /*
> > + * Migrate folios selected for demotion.
> > + * Do not consider demoted pages to be reclaimed for the memcg reclaim
> > + * because no charges are really freed during the migration. Global
> > + * reclaim aims at releasing memory from nodes/zones so consider
> > + * demotion to reclaim memory.
> > + */
> > + nr_demoted += demote_folio_list(&demote_folios, pgdat);
> > + if (!cgroup_reclaim(sc))
> > + nr_reclaimed += nr_demoted;
> > +
> > /* Folios that could not be demoted are still in @demote_folios */
> > if (!list_empty(&demote_folios)) {
> > /* Folios which weren't demoted go back on @folio_list for retry: */
> >
> > [...]
>
> Thank you again, but this patch breaks the memory.reclaim nodes arg
> for me. This is my test case. I run it on a machine with 2 memory
> tiers.
>
> Memory tier 1= nodes 0-2
> Memory tier 2= node 3
>
> mkdir -p /sys/fs/cgroup/unified/test
> cd /sys/fs/cgroup/unified/test
> echo $$ > cgroup.procs
> head -c 500m /dev/random > /tmp/testfile
> echo $$ > /sys/fs/cgroup/unified/cgroup.procs
> echo "1m nodes=0-2" > memory.reclaim
>
> In my opinion the expected behavior is for the kernel to demote 1mb of
> memory from nodes 0-2 to node 3.
>
> Actual behavior on the tip of mm-unstable is as expected.
>
> Actual behavior with your patch cherry-picked to mm-unstable is that
> the kernel demotes all 500mb of memory from nodes 0-2 to node 3, and
> returns -EAGAIN to the user. This may be the correct behavior you're
> intending, but it completely breaks the use case I implemented the
> nodes= arg for and listed on the commit message of that change.
Yes, strictly speaking the behavior is correct albeit unexpected. You
have told the kernel to _reclaim_ that much memory but demotion are
simply aging handling rather than a reclaim if the demotion target has a
lot of memory free. This would be the case without any nodemask as well
btw.
I am worried this will popping up again and again. I thought your nodes
subset approach could deal with this but I have overlooked one important
thing in your patch. The user provided nodemask controls where to
reclaim from but it doesn't constrain demotion targets. Is this
intentional? Would it actually make more sense to control demotion by
addint demotion nodes into the nodemask?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-08 8:09 ` Michal Hocko
@ 2022-12-08 9:00 ` Mina Almasry
2022-12-08 11:54 ` Michal Hocko
0 siblings, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-08 9:00 UTC (permalink / raw)
To: Michal Hocko
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Thu, Dec 8, 2022 at 12:09 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Wed 07-12-22 13:43:55, Mina Almasry wrote:
> > On Wed, Dec 7, 2022 at 3:12 AM Michal Hocko <mhocko@suse.com> wrote:
> [...]
> > > Anyway a proper nr_reclaimed tracking should be rather straightforward
> > > but I do not expect to make a big difference in practice
> > >
> > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > index 026199c047e0..1b7f2d8cb128 100644
> > > --- a/mm/vmscan.c
> > > +++ b/mm/vmscan.c
> > > @@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > LIST_HEAD(ret_folios);
> > > LIST_HEAD(free_folios);
> > > LIST_HEAD(demote_folios);
> > > - unsigned int nr_reclaimed = 0;
> > > + unsigned int nr_reclaimed = 0, nr_demoted = 0;
> > > unsigned int pgactivate = 0;
> > > bool do_demote_pass;
> > > struct swap_iocb *plug = NULL;
> > > @@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > }
> > > /* 'folio_list' is always empty here */
> > >
> > > - /* Migrate folios selected for demotion */
> > > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> > > + /*
> > > + * Migrate folios selected for demotion.
> > > + * Do not consider demoted pages to be reclaimed for the memcg reclaim
> > > + * because no charges are really freed during the migration. Global
> > > + * reclaim aims at releasing memory from nodes/zones so consider
> > > + * demotion to reclaim memory.
> > > + */
> > > + nr_demoted += demote_folio_list(&demote_folios, pgdat);
> > > + if (!cgroup_reclaim(sc))
> > > + nr_reclaimed += nr_demoted;
> > > +
> > > /* Folios that could not be demoted are still in @demote_folios */
> > > if (!list_empty(&demote_folios)) {
> > > /* Folios which weren't demoted go back on @folio_list for retry: */
> > >
> > > [...]
> >
> > Thank you again, but this patch breaks the memory.reclaim nodes arg
> > for me. This is my test case. I run it on a machine with 2 memory
> > tiers.
> >
> > Memory tier 1= nodes 0-2
> > Memory tier 2= node 3
> >
> > mkdir -p /sys/fs/cgroup/unified/test
> > cd /sys/fs/cgroup/unified/test
> > echo $$ > cgroup.procs
> > head -c 500m /dev/random > /tmp/testfile
> > echo $$ > /sys/fs/cgroup/unified/cgroup.procs
> > echo "1m nodes=0-2" > memory.reclaim
> >
> > In my opinion the expected behavior is for the kernel to demote 1mb of
> > memory from nodes 0-2 to node 3.
> >
> > Actual behavior on the tip of mm-unstable is as expected.
> >
> > Actual behavior with your patch cherry-picked to mm-unstable is that
> > the kernel demotes all 500mb of memory from nodes 0-2 to node 3, and
> > returns -EAGAIN to the user. This may be the correct behavior you're
> > intending, but it completely breaks the use case I implemented the
> > nodes= arg for and listed on the commit message of that change.
>
> Yes, strictly speaking the behavior is correct albeit unexpected. You
> have told the kernel to _reclaim_ that much memory but demotion are
> simply aging handling rather than a reclaim if the demotion target has a
> lot of memory free.
Yes, by the strict definition of reclaim, you're completely correct.
But in reality earlier I proposed a patch to the kernel that disables
demotion in proactive reclaim. That would have been a correct change
by the strict definition of reclaim, but Johannes informed me that
meta already has a dependency on proactive reclaim triggering demotion
and directed me to add a nodes= arg to memory.reclaim to trigger
demotion instead, to satisfy both use cases. Seems both us and meta
are using this interface to trigger both reclaim and demotion, despite
the strict definition of the word?
> This would be the case without any nodemask as well
> btw.
>
The difference here is that without any nodemask, the kernel will also
reclaim from bottom tier nodes, which will count towards the user's
request so the behavior makes sense in my opinion. If nodemask=NULL or
nodemask=ALL_NODES, then the caller is asking for reclaim across all
nodes which should not count demoted pages IMO. The kernel can still
look for demotion opportunities, but the demoted pages would not count
towards the user's request.
> I am worried this will popping up again and again. I thought your nodes
> subset approach could deal with this but I have overlooked one important
> thing in your patch. The user provided nodemask controls where to
> reclaim from but it doesn't constrain demotion targets. Is this
> intentional? Would it actually make more sense to control demotion by
> addint demotion nodes into the nodemask?
>
IMO, yes it is intentional, and no I would not recommend adding
demotion nodes (I assume you mean adding both demote_from_nodes and
demote_to_nodes as arg). My opinion is based on 2 reasons:
1. We control proactive reclaim by looking for nodes/tiers approaching
pressure and triggering reclaim/demotion from said nodes/tiers. So we
know the node/tier we would like to reclaim from, but not necessarily
have a requirement on where the memory should go. I think it should be
up to the kernel.
2. Currently I think most tiered machines will have 2 memory tiers,
but I think the code is designed to support N memory tiers. What
happens if N=3 and the user asks you to demote from the top tier nodes
to the bottom tier nodes (skipping the middle tier)? The user in this
case is explicitly asking to break the aging pipeline. From my short
while on the mailing list I see great interest in respecting the aging
pipeline, so it seems to me the demotion target should be decided by
the kernel based on the aging pipeline, and the user should not be
able to override it? I don't know. Maybe there is a valid use case for
that somewhere.
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-08 9:00 ` Mina Almasry
@ 2022-12-08 11:54 ` Michal Hocko
2022-12-09 0:59 ` Wei Xu
0 siblings, 1 reply; 24+ messages in thread
From: Michal Hocko @ 2022-12-08 11:54 UTC (permalink / raw)
To: Mina Almasry
Cc: Andrew Morton, Johannes Weiner, Roman Gushchin, Shakeel Butt,
Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed, weixugc, fvdl,
linux-mm, linux-kernel
On Thu 08-12-22 01:00:40, Mina Almasry wrote:
> On Thu, Dec 8, 2022 at 12:09 AM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Wed 07-12-22 13:43:55, Mina Almasry wrote:
> > > On Wed, Dec 7, 2022 at 3:12 AM Michal Hocko <mhocko@suse.com> wrote:
> > [...]
> > > > Anyway a proper nr_reclaimed tracking should be rather straightforward
> > > > but I do not expect to make a big difference in practice
> > > >
> > > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > > index 026199c047e0..1b7f2d8cb128 100644
> > > > --- a/mm/vmscan.c
> > > > +++ b/mm/vmscan.c
> > > > @@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > > LIST_HEAD(ret_folios);
> > > > LIST_HEAD(free_folios);
> > > > LIST_HEAD(demote_folios);
> > > > - unsigned int nr_reclaimed = 0;
> > > > + unsigned int nr_reclaimed = 0, nr_demoted = 0;
> > > > unsigned int pgactivate = 0;
> > > > bool do_demote_pass;
> > > > struct swap_iocb *plug = NULL;
> > > > @@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > > }
> > > > /* 'folio_list' is always empty here */
> > > >
> > > > - /* Migrate folios selected for demotion */
> > > > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> > > > + /*
> > > > + * Migrate folios selected for demotion.
> > > > + * Do not consider demoted pages to be reclaimed for the memcg reclaim
> > > > + * because no charges are really freed during the migration. Global
> > > > + * reclaim aims at releasing memory from nodes/zones so consider
> > > > + * demotion to reclaim memory.
> > > > + */
> > > > + nr_demoted += demote_folio_list(&demote_folios, pgdat);
> > > > + if (!cgroup_reclaim(sc))
> > > > + nr_reclaimed += nr_demoted;
> > > > +
> > > > /* Folios that could not be demoted are still in @demote_folios */
> > > > if (!list_empty(&demote_folios)) {
> > > > /* Folios which weren't demoted go back on @folio_list for retry: */
> > > >
> > > > [...]
> > >
> > > Thank you again, but this patch breaks the memory.reclaim nodes arg
> > > for me. This is my test case. I run it on a machine with 2 memory
> > > tiers.
> > >
> > > Memory tier 1= nodes 0-2
> > > Memory tier 2= node 3
> > >
> > > mkdir -p /sys/fs/cgroup/unified/test
> > > cd /sys/fs/cgroup/unified/test
> > > echo $$ > cgroup.procs
> > > head -c 500m /dev/random > /tmp/testfile
> > > echo $$ > /sys/fs/cgroup/unified/cgroup.procs
> > > echo "1m nodes=0-2" > memory.reclaim
> > >
> > > In my opinion the expected behavior is for the kernel to demote 1mb of
> > > memory from nodes 0-2 to node 3.
> > >
> > > Actual behavior on the tip of mm-unstable is as expected.
> > >
> > > Actual behavior with your patch cherry-picked to mm-unstable is that
> > > the kernel demotes all 500mb of memory from nodes 0-2 to node 3, and
> > > returns -EAGAIN to the user. This may be the correct behavior you're
> > > intending, but it completely breaks the use case I implemented the
> > > nodes= arg for and listed on the commit message of that change.
> >
> > Yes, strictly speaking the behavior is correct albeit unexpected. You
> > have told the kernel to _reclaim_ that much memory but demotion are
> > simply aging handling rather than a reclaim if the demotion target has a
> > lot of memory free.
>
> Yes, by the strict definition of reclaim, you're completely correct.
> But in reality earlier I proposed a patch to the kernel that disables
> demotion in proactive reclaim. That would have been a correct change
> by the strict definition of reclaim, but Johannes informed me that
> meta already has a dependency on proactive reclaim triggering demotion
> and directed me to add a nodes= arg to memory.reclaim to trigger
> demotion instead, to satisfy both use cases. Seems both us and meta
> are using this interface to trigger both reclaim and demotion, despite
> the strict definition of the word?
Well, demotion is a part of aging and that is a part of the reclaim so I
believe we want both and demotion mostly an implementation detail. If
you want to have a very precise control then the nodemask should drive
you there.
[...]
> > I am worried this will popping up again and again. I thought your nodes
> > subset approach could deal with this but I have overlooked one important
> > thing in your patch. The user provided nodemask controls where to
> > reclaim from but it doesn't constrain demotion targets. Is this
> > intentional? Would it actually make more sense to control demotion by
> > addint demotion nodes into the nodemask?
> >
>
> IMO, yes it is intentional, and no I would not recommend adding
> demotion nodes (I assume you mean adding both demote_from_nodes and
> demote_to_nodes as arg).
What I really mean is to add demotion nodes to the nodemask along with
the set of nodes you want to reclaim from. To me that sounds like a
more natural interface allowing for all sorts of usecases:
- free up demotion targets (only specify demotion nodes in the mask)
- control where to demote (e.g. select specific demotion target(s))
- do not demote at all (skip demotion nodes from the node mask)
> My opinion is based on 2 reasons:
>
> 1. We control proactive reclaim by looking for nodes/tiers approaching
> pressure and triggering reclaim/demotion from said nodes/tiers. So we
> know the node/tier we would like to reclaim from, but not necessarily
> have a requirement on where the memory should go. I think it should be
> up to the kernel.
> 2. Currently I think most tiered machines will have 2 memory tiers,
> but I think the code is designed to support N memory tiers. What
> happens if N=3 and the user asks you to demote from the top tier nodes
> to the bottom tier nodes (skipping the middle tier)? The user in this
> case is explicitly asking to break the aging pipeline. From my short
> while on the mailing list I see great interest in respecting the aging
> pipeline, so it seems to me the demotion target should be decided by
> the kernel based on the aging pipeline, and the user should not be
> able to override it? I don't know. Maybe there is a valid use case for
> that somewhere.
I agree that the agining should be preserved as much as possible unless
there is an explicit requirement to do otherwise which might be
something application specific.
It is really hard to assume all the usecases at this stage but we should
keep in mind that the semantic of the interface will get cast into stone
once it is released. As of now I do see a great confusion point in the
nodemask semantic which pretends to allow some fine control while it is
largerly hard to predict because it makes some assumptions about the
reclaim while it has a very limited control of the demotion.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-08 11:54 ` Michal Hocko
@ 2022-12-09 0:59 ` Wei Xu
2022-12-09 8:08 ` Michal Hocko
0 siblings, 1 reply; 24+ messages in thread
From: Wei Xu @ 2022-12-09 0:59 UTC (permalink / raw)
To: Michal Hocko
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Thu, Dec 8, 2022 at 3:54 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Thu 08-12-22 01:00:40, Mina Almasry wrote:
> > On Thu, Dec 8, 2022 at 12:09 AM Michal Hocko <mhocko@suse.com> wrote:
> > >
> > > On Wed 07-12-22 13:43:55, Mina Almasry wrote:
> > > > On Wed, Dec 7, 2022 at 3:12 AM Michal Hocko <mhocko@suse.com> wrote:
> > > [...]
> > > > > Anyway a proper nr_reclaimed tracking should be rather straightforward
> > > > > but I do not expect to make a big difference in practice
> > > > >
> > > > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > > > index 026199c047e0..1b7f2d8cb128 100644
> > > > > --- a/mm/vmscan.c
> > > > > +++ b/mm/vmscan.c
> > > > > @@ -1633,7 +1633,7 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > > > LIST_HEAD(ret_folios);
> > > > > LIST_HEAD(free_folios);
> > > > > LIST_HEAD(demote_folios);
> > > > > - unsigned int nr_reclaimed = 0;
> > > > > + unsigned int nr_reclaimed = 0, nr_demoted = 0;
> > > > > unsigned int pgactivate = 0;
> > > > > bool do_demote_pass;
> > > > > struct swap_iocb *plug = NULL;
> > > > > @@ -2065,8 +2065,17 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
> > > > > }
> > > > > /* 'folio_list' is always empty here */
> > > > >
> > > > > - /* Migrate folios selected for demotion */
> > > > > - nr_reclaimed += demote_folio_list(&demote_folios, pgdat);
> > > > > + /*
> > > > > + * Migrate folios selected for demotion.
> > > > > + * Do not consider demoted pages to be reclaimed for the memcg reclaim
> > > > > + * because no charges are really freed during the migration. Global
> > > > > + * reclaim aims at releasing memory from nodes/zones so consider
> > > > > + * demotion to reclaim memory.
> > > > > + */
> > > > > + nr_demoted += demote_folio_list(&demote_folios, pgdat);
> > > > > + if (!cgroup_reclaim(sc))
> > > > > + nr_reclaimed += nr_demoted;
> > > > > +
> > > > > /* Folios that could not be demoted are still in @demote_folios */
> > > > > if (!list_empty(&demote_folios)) {
> > > > > /* Folios which weren't demoted go back on @folio_list for retry: */
> > > > >
> > > > > [...]
> > > >
> > > > Thank you again, but this patch breaks the memory.reclaim nodes arg
> > > > for me. This is my test case. I run it on a machine with 2 memory
> > > > tiers.
> > > >
> > > > Memory tier 1= nodes 0-2
> > > > Memory tier 2= node 3
> > > >
> > > > mkdir -p /sys/fs/cgroup/unified/test
> > > > cd /sys/fs/cgroup/unified/test
> > > > echo $$ > cgroup.procs
> > > > head -c 500m /dev/random > /tmp/testfile
> > > > echo $$ > /sys/fs/cgroup/unified/cgroup.procs
> > > > echo "1m nodes=0-2" > memory.reclaim
> > > >
> > > > In my opinion the expected behavior is for the kernel to demote 1mb of
> > > > memory from nodes 0-2 to node 3.
> > > >
> > > > Actual behavior on the tip of mm-unstable is as expected.
> > > >
> > > > Actual behavior with your patch cherry-picked to mm-unstable is that
> > > > the kernel demotes all 500mb of memory from nodes 0-2 to node 3, and
> > > > returns -EAGAIN to the user. This may be the correct behavior you're
> > > > intending, but it completely breaks the use case I implemented the
> > > > nodes= arg for and listed on the commit message of that change.
> > >
> > > Yes, strictly speaking the behavior is correct albeit unexpected. You
> > > have told the kernel to _reclaim_ that much memory but demotion are
> > > simply aging handling rather than a reclaim if the demotion target has a
> > > lot of memory free.
> >
> > Yes, by the strict definition of reclaim, you're completely correct.
> > But in reality earlier I proposed a patch to the kernel that disables
> > demotion in proactive reclaim. That would have been a correct change
> > by the strict definition of reclaim, but Johannes informed me that
> > meta already has a dependency on proactive reclaim triggering demotion
> > and directed me to add a nodes= arg to memory.reclaim to trigger
> > demotion instead, to satisfy both use cases. Seems both us and meta
> > are using this interface to trigger both reclaim and demotion, despite
> > the strict definition of the word?
>
> Well, demotion is a part of aging and that is a part of the reclaim so I
> believe we want both and demotion mostly an implementation detail. If
> you want to have a very precise control then the nodemask should drive
> you there.
>
> [...]
> > > I am worried this will popping up again and again. I thought your nodes
> > > subset approach could deal with this but I have overlooked one important
> > > thing in your patch. The user provided nodemask controls where to
> > > reclaim from but it doesn't constrain demotion targets. Is this
> > > intentional? Would it actually make more sense to control demotion by
> > > addint demotion nodes into the nodemask?
> > >
> >
> > IMO, yes it is intentional, and no I would not recommend adding
> > demotion nodes (I assume you mean adding both demote_from_nodes and
> > demote_to_nodes as arg).
>
> What I really mean is to add demotion nodes to the nodemask along with
> the set of nodes you want to reclaim from. To me that sounds like a
> more natural interface allowing for all sorts of usecases:
> - free up demotion targets (only specify demotion nodes in the mask)
> - control where to demote (e.g. select specific demotion target(s))
> - do not demote at all (skip demotion nodes from the node mask)
For clarification, do you mean to add another argument (e.g.
demotion_nodes) in addition to the "nodes" argument? Also, which
meaning do these arguments have?
- Option 1: The "nodes" argument specifies the source nodes where
pages should be reclaimed (but not demoted) from and the
"demotion_nodes" argument specifies the source nodes where pages
should be demoted (but not reclaimed) from.
- Option 2: The "nodes" argument specifies the source nodes where
pages should be reclaimed or demoted from and the "demotion_nodes"
argument specifies the allowed demotion target nodes.
Option 1 is more flexible in allowing various use cases. Option 2 can
also support the use cases to reclaim only without demotion and
demotion with fallback to reclaim, but cannot support demotion only
without reclaim.
> > My opinion is based on 2 reasons:
> >
> > 1. We control proactive reclaim by looking for nodes/tiers approaching
> > pressure and triggering reclaim/demotion from said nodes/tiers. So we
> > know the node/tier we would like to reclaim from, but not necessarily
> > have a requirement on where the memory should go. I think it should be
> > up to the kernel.
> > 2. Currently I think most tiered machines will have 2 memory tiers,
> > but I think the code is designed to support N memory tiers. What
> > happens if N=3 and the user asks you to demote from the top tier nodes
> > to the bottom tier nodes (skipping the middle tier)? The user in this
> > case is explicitly asking to break the aging pipeline. From my short
> > while on the mailing list I see great interest in respecting the aging
> > pipeline, so it seems to me the demotion target should be decided by
> > the kernel based on the aging pipeline, and the user should not be
> > able to override it? I don't know. Maybe there is a valid use case for
> > that somewhere.
>
> I agree that the agining should be preserved as much as possible unless
> there is an explicit requirement to do otherwise which might be
> something application specific.
>
> It is really hard to assume all the usecases at this stage but we should
> keep in mind that the semantic of the interface will get cast into stone
> once it is released. As of now I do see a great confusion point in the
> nodemask semantic which pretends to allow some fine control while it is
> largerly hard to predict because it makes some assumptions about the
> reclaim while it has a very limited control of the demotion.
>
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 0:59 ` Wei Xu
@ 2022-12-09 8:08 ` Michal Hocko
2022-12-09 16:41 ` Wei Xu
0 siblings, 1 reply; 24+ messages in thread
From: Michal Hocko @ 2022-12-09 8:08 UTC (permalink / raw)
To: Wei Xu
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Thu 08-12-22 16:59:36, Wei Xu wrote:
[...]
> > What I really mean is to add demotion nodes to the nodemask along with
> > the set of nodes you want to reclaim from. To me that sounds like a
> > more natural interface allowing for all sorts of usecases:
> > - free up demotion targets (only specify demotion nodes in the mask)
> > - control where to demote (e.g. select specific demotion target(s))
> > - do not demote at all (skip demotion nodes from the node mask)
>
> For clarification, do you mean to add another argument (e.g.
> demotion_nodes) in addition to the "nodes" argument?
No, nodes=mask argument should control the domain where the memory
reclaim should happen. That includes both aging and the reclaim. If the
mask doesn't contain any lower tier node then no demotion will happen.
If only a subset of lower tiers are specified then only those could be
used for the demotion process. Or put it otherwise, the nodemask is not
only used to filter out zonelists during reclaim it also restricts
migration targets.
Is this more clear now?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 8:08 ` Michal Hocko
@ 2022-12-09 16:41 ` Wei Xu
2022-12-09 21:16 ` Michal Hocko
0 siblings, 1 reply; 24+ messages in thread
From: Wei Xu @ 2022-12-09 16:41 UTC (permalink / raw)
To: Michal Hocko
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
>
> On Thu 08-12-22 16:59:36, Wei Xu wrote:
> [...]
> > > What I really mean is to add demotion nodes to the nodemask along with
> > > the set of nodes you want to reclaim from. To me that sounds like a
> > > more natural interface allowing for all sorts of usecases:
> > > - free up demotion targets (only specify demotion nodes in the mask)
> > > - control where to demote (e.g. select specific demotion target(s))
> > > - do not demote at all (skip demotion nodes from the node mask)
> >
> > For clarification, do you mean to add another argument (e.g.
> > demotion_nodes) in addition to the "nodes" argument?
>
> No, nodes=mask argument should control the domain where the memory
> reclaim should happen. That includes both aging and the reclaim. If the
> mask doesn't contain any lower tier node then no demotion will happen.
> If only a subset of lower tiers are specified then only those could be
> used for the demotion process. Or put it otherwise, the nodemask is not
> only used to filter out zonelists during reclaim it also restricts
> migration targets.
>
> Is this more clear now?
In that case, how can we request demotion only from toptier nodes
(without counting any reclaimed bytes from other nodes), which is our
memory tiering use case?
Besides, when both toptier and demotion nodes are specified, the
demoted pages should only be counted as aging and not be counted
towards the requested bytes of try_to_free_mem_cgroup_pages(), which
is what this patch tries to address.
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 16:41 ` Wei Xu
@ 2022-12-09 21:16 ` Michal Hocko
2022-12-09 21:39 ` Mina Almasry
2022-12-10 8:01 ` Wei Xu
0 siblings, 2 replies; 24+ messages in thread
From: Michal Hocko @ 2022-12-09 21:16 UTC (permalink / raw)
To: Wei Xu
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Fri 09-12-22 08:41:47, Wei Xu wrote:
> On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Thu 08-12-22 16:59:36, Wei Xu wrote:
> > [...]
> > > > What I really mean is to add demotion nodes to the nodemask along with
> > > > the set of nodes you want to reclaim from. To me that sounds like a
> > > > more natural interface allowing for all sorts of usecases:
> > > > - free up demotion targets (only specify demotion nodes in the mask)
> > > > - control where to demote (e.g. select specific demotion target(s))
> > > > - do not demote at all (skip demotion nodes from the node mask)
> > >
> > > For clarification, do you mean to add another argument (e.g.
> > > demotion_nodes) in addition to the "nodes" argument?
> >
> > No, nodes=mask argument should control the domain where the memory
> > reclaim should happen. That includes both aging and the reclaim. If the
> > mask doesn't contain any lower tier node then no demotion will happen.
> > If only a subset of lower tiers are specified then only those could be
> > used for the demotion process. Or put it otherwise, the nodemask is not
> > only used to filter out zonelists during reclaim it also restricts
> > migration targets.
> >
> > Is this more clear now?
>
> In that case, how can we request demotion only from toptier nodes
> (without counting any reclaimed bytes from other nodes), which is our
> memory tiering use case?
I am not sure I follow. Could you be more specific please?
> Besides, when both toptier and demotion nodes are specified, the
> demoted pages should only be counted as aging and not be counted
> towards the requested bytes of try_to_free_mem_cgroup_pages(), which
> is what this patch tries to address.
This should be addressed by
http://lkml.kernel.org/r/Y5B1K5zAE0PkjFZx@dhcp22.suse.cz, no?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 21:16 ` Michal Hocko
@ 2022-12-09 21:39 ` Mina Almasry
2022-12-12 8:33 ` Michal Hocko
2022-12-10 8:01 ` Wei Xu
1 sibling, 1 reply; 24+ messages in thread
From: Mina Almasry @ 2022-12-09 21:39 UTC (permalink / raw)
To: Michal Hocko
Cc: Wei Xu, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Fri, Dec 9, 2022 at 1:16 PM Michal Hocko <mhocko@suse.com> wrote:
>
> On Fri 09-12-22 08:41:47, Wei Xu wrote:
> > On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
> > >
> > > On Thu 08-12-22 16:59:36, Wei Xu wrote:
> > > [...]
> > > > > What I really mean is to add demotion nodes to the nodemask along with
> > > > > the set of nodes you want to reclaim from. To me that sounds like a
> > > > > more natural interface allowing for all sorts of usecases:
> > > > > - free up demotion targets (only specify demotion nodes in the mask)
> > > > > - control where to demote (e.g. select specific demotion target(s))
> > > > > - do not demote at all (skip demotion nodes from the node mask)
> > > >
> > > > For clarification, do you mean to add another argument (e.g.
> > > > demotion_nodes) in addition to the "nodes" argument?
> > >
> > > No, nodes=mask argument should control the domain where the memory
> > > reclaim should happen. That includes both aging and the reclaim. If the
> > > mask doesn't contain any lower tier node then no demotion will happen.
> > > If only a subset of lower tiers are specified then only those could be
> > > used for the demotion process. Or put it otherwise, the nodemask is not
> > > only used to filter out zonelists during reclaim it also restricts
> > > migration targets.
> > >
> > > Is this more clear now?
> >
I think putting the demotion sources and demotion targets in the same
nodemask is a bit confusing, and prone to error. IIUC the user puts
both the demotion source and the demotion target in the nodemaks, and
the kernel infers which is which depending on whether the node is a
top-tier node, or a bottom tier node. I think in the future this will
become ambiguous. What happens in the future when the user when the
machine has N memory tiers and the user specifies a node in a middle
tier in the nodemask? Does that mean the user wants demotion from or
to this node? Middle memory tiers can act as both...
I think if your goal is to constrain demotion targets then a much more
clear and future proof way is to simply add a second arg to
memory.reclaim "allowed_demotion_targets=".\
> > In that case, how can we request demotion only from toptier nodes
> > (without counting any reclaimed bytes from other nodes), which is our
> > memory tiering use case?
>
> I am not sure I follow. Could you be more specific please?
>
> > Besides, when both toptier and demotion nodes are specified, the
> > demoted pages should only be counted as aging and not be counted
> > towards the requested bytes of try_to_free_mem_cgroup_pages(), which
> > is what this patch tries to address.
>
> This should be addressed by
> http://lkml.kernel.org/r/Y5B1K5zAE0PkjFZx@dhcp22.suse.cz, no?
I think I provided a test case in [1] showing very clearly that this
breaks one of our use cases, i.e. the use case where the user is
asking to demote X bytes from the top tier nodes to the lower tier
nodes. I would not like to proceed with a fix that breaks one of our
use cases. I believe I provided in this patch a fix that caters to all
existing users, and we should take the fix in this patch over a fix
that breaks use cases.
[1] https://lore.kernel.org/all/CAHS8izMKK107wVFSJvg36nQ=WzXd8_cjYBtR0p47L+XLYUSsqA@mail.gmail.com/
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 21:16 ` Michal Hocko
2022-12-09 21:39 ` Mina Almasry
@ 2022-12-10 8:01 ` Wei Xu
2022-12-12 8:36 ` Michal Hocko
1 sibling, 1 reply; 24+ messages in thread
From: Wei Xu @ 2022-12-10 8:01 UTC (permalink / raw)
To: Michal Hocko
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Fri, Dec 9, 2022 at 1:16 PM Michal Hocko <mhocko@suse.com> wrote:
>
> On Fri 09-12-22 08:41:47, Wei Xu wrote:
> > On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
> > >
> > > On Thu 08-12-22 16:59:36, Wei Xu wrote:
> > > [...]
> > > > > What I really mean is to add demotion nodes to the nodemask along with
> > > > > the set of nodes you want to reclaim from. To me that sounds like a
> > > > > more natural interface allowing for all sorts of usecases:
> > > > > - free up demotion targets (only specify demotion nodes in the mask)
> > > > > - control where to demote (e.g. select specific demotion target(s))
> > > > > - do not demote at all (skip demotion nodes from the node mask)
> > > >
> > > > For clarification, do you mean to add another argument (e.g.
> > > > demotion_nodes) in addition to the "nodes" argument?
> > >
> > > No, nodes=mask argument should control the domain where the memory
> > > reclaim should happen. That includes both aging and the reclaim. If the
> > > mask doesn't contain any lower tier node then no demotion will happen.
> > > If only a subset of lower tiers are specified then only those could be
> > > used for the demotion process. Or put it otherwise, the nodemask is not
> > > only used to filter out zonelists during reclaim it also restricts
> > > migration targets.
> > >
> > > Is this more clear now?
> >
> > In that case, how can we request demotion only from toptier nodes
> > (without counting any reclaimed bytes from other nodes), which is our
> > memory tiering use case?
>
> I am not sure I follow. Could you be more specific please?
In our memory tiering use case, we would like to proactively free up
memory on top-tier nodes by demoting cold pages to lower-tier nodes.
This is to create enough free top-tier memory for new allocations and
promotions. How many pages and how often to demote from top-tier
nodes can depend on a number of factors (e.g. the amount of free
top-tier memory, the amount of cold pages, the bandwidth pressure on
lower-tier, the task tolerance of slower memory on performance) and
are controlled by the userspace policies.
Because the purpose of such proactive demotions is to free up top-tier
memory, not to lower the amount of memory charged to the memcg, we'd
like that memory.reclaim can demote the specified amount of bytes from
the given top-tier nodes. If we have to also provide the lower-tier
nodes to memory.reclaim to allow demotions, the kernel can reclaim
from the lower-tier nodes in the same memory.reclaim request. We then
won't be able to control the amount of bytes to be demoted from
top-tier nodes.
> > Besides, when both toptier and demotion nodes are specified, the
> > demoted pages should only be counted as aging and not be counted
> > towards the requested bytes of try_to_free_mem_cgroup_pages(), which
> > is what this patch tries to address.
>
> This should be addressed by
> http://lkml.kernel.org/r/Y5B1K5zAE0PkjFZx@dhcp22.suse.cz, no?
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-09 21:39 ` Mina Almasry
@ 2022-12-12 8:33 ` Michal Hocko
0 siblings, 0 replies; 24+ messages in thread
From: Michal Hocko @ 2022-12-12 8:33 UTC (permalink / raw)
To: Mina Almasry
Cc: Wei Xu, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Fri 09-12-22 13:39:44, Mina Almasry wrote:
> On Fri, Dec 9, 2022 at 1:16 PM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Fri 09-12-22 08:41:47, Wei Xu wrote:
> > > On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
> > > >
> > > > On Thu 08-12-22 16:59:36, Wei Xu wrote:
> > > > [...]
> > > > > > What I really mean is to add demotion nodes to the nodemask along with
> > > > > > the set of nodes you want to reclaim from. To me that sounds like a
> > > > > > more natural interface allowing for all sorts of usecases:
> > > > > > - free up demotion targets (only specify demotion nodes in the mask)
> > > > > > - control where to demote (e.g. select specific demotion target(s))
> > > > > > - do not demote at all (skip demotion nodes from the node mask)
> > > > >
> > > > > For clarification, do you mean to add another argument (e.g.
> > > > > demotion_nodes) in addition to the "nodes" argument?
> > > >
> > > > No, nodes=mask argument should control the domain where the memory
> > > > reclaim should happen. That includes both aging and the reclaim. If the
> > > > mask doesn't contain any lower tier node then no demotion will happen.
> > > > If only a subset of lower tiers are specified then only those could be
> > > > used for the demotion process. Or put it otherwise, the nodemask is not
> > > > only used to filter out zonelists during reclaim it also restricts
> > > > migration targets.
> > > >
> > > > Is this more clear now?
> > >
>
> I think putting the demotion sources and demotion targets in the same
> nodemask is a bit confusing, and prone to error. IIUC the user puts
> both the demotion source and the demotion target in the nodemaks, and
> the kernel infers which is which depending on whether the node is a
> top-tier node, or a bottom tier node.
The level of the tier is not really all that important. All you request
from the userspace is to free up some charges based on aging (it is a
reclaim interface). The specified nodemask doesn't and cannot really
tell anything about how that is achieved because that is an internal
implementation detail. The nodemask extension defines a domain where
that aging and reclaim should happen. Treating demotion special and
assuming a certain behavior is a free ticket to future headaches.
> I think in the future this will
> become ambiguous. What happens in the future when the user when the
> machine has N memory tiers and the user specifies a node in a middle
> tier in the nodemask? Does that mean the user wants demotion from or
> to this node? Middle memory tiers can act as both...
It's really very simple. The memory reclaim (both aging and actual
eviction) is bound to the given nodemask. Full stop. See how that
doesn't say anything about demotion? It simply is not important.
Say you have a multi-layer system with nodes 0-3 with RAM, 4, 5 with
tier 1 and nodes 6, 7 as a second tier with the following topology.
RAM nodes can demote to any lower tiers. Node 4 can demote to 6 and node
5 to node 7. Now say you want to release some memory from node 2 and 3
to release some memory from there also globally yet node 5 should be
avoided for whatever reason. If you reclaim with nodemask=2,3,4,6 will
achieve exactly that without any ambiguity. Each node in the node mask
will get aged and demotion targets will be filtered based on the
nodemask as well so you cannot really end up aging (and demoting from)
nodes 5, 7 even if they are part of the demotion path. This is simply
impossible if the demotion target is implicit and it can live outside of
the provided nodemask. Are you on the same page that this would be
problematic?
> I think if your goal is to constrain demotion targets then a much more
> clear and future proof way is to simply add a second arg to
> memory.reclaim "allowed_demotion_targets=".\
That would be an option as well but what is the exact semantic? Do you
control the demotion path as well?
> > > In that case, how can we request demotion only from toptier nodes
> > > (without counting any reclaimed bytes from other nodes), which is our
> > > memory tiering use case?
> >
> > I am not sure I follow. Could you be more specific please?
> >
> > > Besides, when both toptier and demotion nodes are specified, the
> > > demoted pages should only be counted as aging and not be counted
> > > towards the requested bytes of try_to_free_mem_cgroup_pages(), which
> > > is what this patch tries to address.
> >
> > This should be addressed by
> > http://lkml.kernel.org/r/Y5B1K5zAE0PkjFZx@dhcp22.suse.cz, no?
>
> I think I provided a test case in [1] showing very clearly that this
> breaks one of our use cases, i.e. the use case where the user is
> asking to demote X bytes from the top tier nodes to the lower tier
> nodes.
Are you referring to EAGAIN situation as a result of the nr_reclaimed
patch? Please note that the patch was untested and likely incomplete.
Also really slightly independent on the actual nodemask reclaim
extension. Btw. based on these discussions I have to retract my ack and
reopen the discussion (will follow up on the original email thread). The
current semantic is really concerning.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems
2022-12-10 8:01 ` Wei Xu
@ 2022-12-12 8:36 ` Michal Hocko
0 siblings, 0 replies; 24+ messages in thread
From: Michal Hocko @ 2022-12-12 8:36 UTC (permalink / raw)
To: Wei Xu
Cc: Mina Almasry, Andrew Morton, Johannes Weiner, Roman Gushchin,
Shakeel Butt, Muchun Song, Huang Ying, Yang Shi, Yosry Ahmed,
fvdl, linux-mm, linux-kernel
On Sat 10-12-22 00:01:28, Wei Xu wrote:
> On Fri, Dec 9, 2022 at 1:16 PM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Fri 09-12-22 08:41:47, Wei Xu wrote:
> > > On Fri, Dec 9, 2022 at 12:08 AM Michal Hocko <mhocko@suse.com> wrote:
> > > >
> > > > On Thu 08-12-22 16:59:36, Wei Xu wrote:
> > > > [...]
> > > > > > What I really mean is to add demotion nodes to the nodemask along with
> > > > > > the set of nodes you want to reclaim from. To me that sounds like a
> > > > > > more natural interface allowing for all sorts of usecases:
> > > > > > - free up demotion targets (only specify demotion nodes in the mask)
> > > > > > - control where to demote (e.g. select specific demotion target(s))
> > > > > > - do not demote at all (skip demotion nodes from the node mask)
> > > > >
> > > > > For clarification, do you mean to add another argument (e.g.
> > > > > demotion_nodes) in addition to the "nodes" argument?
> > > >
> > > > No, nodes=mask argument should control the domain where the memory
> > > > reclaim should happen. That includes both aging and the reclaim. If the
> > > > mask doesn't contain any lower tier node then no demotion will happen.
> > > > If only a subset of lower tiers are specified then only those could be
> > > > used for the demotion process. Or put it otherwise, the nodemask is not
> > > > only used to filter out zonelists during reclaim it also restricts
> > > > migration targets.
> > > >
> > > > Is this more clear now?
> > >
> > > In that case, how can we request demotion only from toptier nodes
> > > (without counting any reclaimed bytes from other nodes), which is our
> > > memory tiering use case?
> >
> > I am not sure I follow. Could you be more specific please?
>
> In our memory tiering use case, we would like to proactively free up
> memory on top-tier nodes by demoting cold pages to lower-tier nodes.
> This is to create enough free top-tier memory for new allocations and
> promotions. How many pages and how often to demote from top-tier
> nodes can depend on a number of factors (e.g. the amount of free
> top-tier memory, the amount of cold pages, the bandwidth pressure on
> lower-tier, the task tolerance of slower memory on performance) and
> are controlled by the userspace policies.
>
> Because the purpose of such proactive demotions is to free up top-tier
> memory, not to lower the amount of memory charged to the memcg, we'd
> like that memory.reclaim can demote the specified amount of bytes from
> the given top-tier nodes. If we have to also provide the lower-tier
> nodes to memory.reclaim to allow demotions, the kernel can reclaim
> from the lower-tier nodes in the same memory.reclaim request. We then
> won't be able to control the amount of bytes to be demoted from
> top-tier nodes.
I am not sure this is something to be handled by the reclaim interface
because now you are creating an ambiguity what the interface should do
and start depend on it. Consider that we will change the reclaim
algorithm in the future and the node you request to demote will simply
reclaim rather than demote. This will break your usecase, right?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2022-12-12 8:36 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-06 2:34 [PATCH v3] [mm-unstable] mm: Fix memcg reclaim on memory tiered systems Mina Almasry
2022-12-06 3:13 ` Huang, Ying
2022-12-06 4:15 ` Mina Almasry
2022-12-06 5:22 ` Huang, Ying
2022-12-06 12:20 ` Michal Hocko
2022-12-06 16:06 ` Mina Almasry
2022-12-06 19:55 ` Michal Hocko
2022-12-07 1:22 ` Huang, Ying
2022-12-07 1:55 ` Mina Almasry
2022-12-07 11:12 ` Michal Hocko
2022-12-07 21:43 ` Mina Almasry
2022-12-08 8:09 ` Michal Hocko
2022-12-08 9:00 ` Mina Almasry
2022-12-08 11:54 ` Michal Hocko
2022-12-09 0:59 ` Wei Xu
2022-12-09 8:08 ` Michal Hocko
2022-12-09 16:41 ` Wei Xu
2022-12-09 21:16 ` Michal Hocko
2022-12-09 21:39 ` Mina Almasry
2022-12-12 8:33 ` Michal Hocko
2022-12-10 8:01 ` Wei Xu
2022-12-12 8:36 ` Michal Hocko
2022-12-06 15:15 ` kernel test robot
2022-12-06 18:17 ` kernel test robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).