From: David Hildenbrand <david@redhat.com>
To: Vlastimil Babka <vbabka@suse.cz>, linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, Michal Hocko <mhocko@kernel.org>,
Pavel Tatashin <pasha.tatashin@soleen.com>,
Oscar Salvador <osalvador@suse.de>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: Re: [PATCH 1/9] mm, page_alloc: clean up pageset high and batch update
Date: Fri, 25 Sep 2020 12:18:24 +0200 [thread overview]
Message-ID: <42a55288-b593-a5f8-ce7b-ca86d28fcc7a@redhat.com> (raw)
In-Reply-To: <20200922143712.12048-2-vbabka@suse.cz>
On 22.09.20 16:37, Vlastimil Babka wrote:
> The updates to pcplists' high and batch valued are handled by multiple
> functions that make the calculations hard to follow. Consolidate everything
> to pageset_set_high_and_batch() and remove pageset_set_batch() and
> pageset_set_high() wrappers.
>
> The only special case using one of the removed wrappers was:
> build_all_zonelists_init()
> setup_pageset()
> pageset_set_batch()
> which was hardcoding batch as 0, so we can just open-code a call to
> pageset_update() with constant parameters instead.
>
> No functional change.
>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> Reviewed-by: Oscar Salvador <osalvador@suse.de>
> ---
> mm/page_alloc.c | 49 ++++++++++++++++++++-----------------------------
> 1 file changed, 20 insertions(+), 29 deletions(-)
>
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 60a0e94645a6..a163c5e561f2 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -5823,7 +5823,7 @@ static void build_zonelists(pg_data_t *pgdat)
> * not check if the processor is online before following the pageset pointer.
> * Other parts of the kernel may not check if the zone is available.
> */
> -static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch);
> +static void setup_pageset(struct per_cpu_pageset *p);
> static DEFINE_PER_CPU(struct per_cpu_pageset, boot_pageset);
> static DEFINE_PER_CPU(struct per_cpu_nodestat, boot_nodestats);
>
> @@ -5891,7 +5891,7 @@ build_all_zonelists_init(void)
> * (a chicken-egg dilemma).
> */
> for_each_possible_cpu(cpu)
> - setup_pageset(&per_cpu(boot_pageset, cpu), 0);
> + setup_pageset(&per_cpu(boot_pageset, cpu));
>
> mminit_verify_zonelist();
> cpuset_init_current_mems_allowed();
> @@ -6200,12 +6200,6 @@ static void pageset_update(struct per_cpu_pages *pcp, unsigned long high,
> pcp->batch = batch;
> }
>
> -/* a companion to pageset_set_high() */
> -static void pageset_set_batch(struct per_cpu_pageset *p, unsigned long batch)
> -{
> - pageset_update(&p->pcp, 6 * batch, max(1UL, 1 * batch));
> -}
> -
> static void pageset_init(struct per_cpu_pageset *p)
> {
> struct per_cpu_pages *pcp;
> @@ -6218,35 +6212,32 @@ static void pageset_init(struct per_cpu_pageset *p)
> INIT_LIST_HEAD(&pcp->lists[migratetype]);
> }
>
> -static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
> +static void setup_pageset(struct per_cpu_pageset *p)
> {
> pageset_init(p);
> - pageset_set_batch(p, batch);
> + pageset_update(&p->pcp, 0, 1);
> }
>
> /*
> - * pageset_set_high() sets the high water mark for hot per_cpu_pagelist
> - * to the value high for the pageset p.
> + * Calculate and set new high and batch values for given per-cpu pageset of a
> + * zone, based on the zone's size and the percpu_pagelist_fraction sysctl.
> */
> -static void pageset_set_high(struct per_cpu_pageset *p,
> - unsigned long high)
> -{
> - unsigned long batch = max(1UL, high / 4);
> - if ((high / 4) > (PAGE_SHIFT * 8))
> - batch = PAGE_SHIFT * 8;
> -
> - pageset_update(&p->pcp, high, batch);
> -}
> -
> static void pageset_set_high_and_batch(struct zone *zone,
> - struct per_cpu_pageset *pcp)
> + struct per_cpu_pageset *p)
> {
> - if (percpu_pagelist_fraction)
> - pageset_set_high(pcp,
> - (zone_managed_pages(zone) /
> - percpu_pagelist_fraction));
> - else
> - pageset_set_batch(pcp, zone_batchsize(zone));
> + unsigned long new_high, new_batch;
> +
> + if (percpu_pagelist_fraction) {
> + new_high = zone_managed_pages(zone) / percpu_pagelist_fraction;
> + new_batch = max(1UL, new_high / 4);
> + if ((new_high / 4) > (PAGE_SHIFT * 8))
> + new_batch = PAGE_SHIFT * 8;
> + } else {
> + new_batch = zone_batchsize(zone);
> + new_high = 6 * new_batch;
> + new_batch = max(1UL, 1 * new_batch);
> + }
> + pageset_update(&p->pcp, new_high, new_batch);
> }
>
> static void __meminit zone_pageset_init(struct zone *zone, int cpu)
>
Reviewed-by: David Hildenbrand <david@redhat.com>
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2020-09-25 10:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-22 14:37 [PATCH 0/9] disable pcplists during memory offline Vlastimil Babka
2020-09-22 14:37 ` [PATCH 1/9] mm, page_alloc: clean up pageset high and batch update Vlastimil Babka
2020-09-25 10:18 ` David Hildenbrand [this message]
2020-10-05 12:03 ` Michal Hocko
2020-09-22 14:37 ` [PATCH 2/9] mm, page_alloc: calculate pageset high and batch once per zone Vlastimil Babka
2020-10-05 12:52 ` Michal Hocko
2020-10-06 22:04 ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 3/9] mm, page_alloc: remove setup_pageset() Vlastimil Babka
2020-09-25 10:19 ` David Hildenbrand
2020-10-05 12:59 ` Michal Hocko
2020-10-06 22:11 ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 4/9] mm, page_alloc: simplify pageset_update() Vlastimil Babka
2020-09-25 10:23 ` David Hildenbrand
2020-10-05 13:20 ` Michal Hocko
2020-09-22 14:37 ` [PATCH 5/9] mm, page_alloc: make per_cpu_pageset accessible only after init Vlastimil Babka
2020-09-25 10:25 ` David Hildenbrand
2020-10-05 13:24 ` Michal Hocko
2020-10-06 22:28 ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 6/9] mm, page_alloc: cache pageset high and batch in struct zone Vlastimil Babka
2020-09-25 10:34 ` David Hildenbrand
2020-10-06 22:31 ` Vlastimil Babka
2020-10-05 13:28 ` Michal Hocko
2020-10-06 22:34 ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 7/9] mm, page_alloc: move draining pcplists to page isolation users Vlastimil Babka
2020-09-25 10:39 ` David Hildenbrand
2020-10-05 13:57 ` Michal Hocko
2020-09-22 14:37 ` [PATCH 8/9] mm, page_alloc: drain all pcplists during memory offline Vlastimil Babka
2020-09-25 10:46 ` David Hildenbrand
2020-10-05 14:03 ` Michal Hocko
2020-09-22 14:37 ` [PATCH 9/9] mm, page_alloc: optionally disable pcplists during page isolation Vlastimil Babka
2020-09-25 10:53 ` David Hildenbrand
2020-09-25 10:54 ` David Hildenbrand
2020-09-25 11:10 ` Vlastimil Babka
2020-10-01 8:47 ` David Hildenbrand
2020-10-05 14:05 ` Michal Hocko
2020-10-05 14:22 ` Vlastimil Babka
2020-10-05 16:56 ` Michal Hocko
2020-10-06 8:34 ` Michal Hocko
2020-10-06 8:40 ` David Hildenbrand
2020-10-06 10:05 ` Michal Hocko
2020-09-22 17:15 ` [PATCH 0/9] disable pcplists during memory offline David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42a55288-b593-a5f8-ce7b-ca86d28fcc7a@redhat.com \
--to=david@redhat.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=osalvador@suse.de \
--cc=pasha.tatashin@soleen.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).