linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Vlastimil Babka <vbabka@suse.cz>, linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, Michal Hocko <mhocko@kernel.org>,
	Pavel Tatashin <pasha.tatashin@soleen.com>,
	Oscar Salvador <osalvador@suse.de>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	Michal Hocko <mhocko@suse.com>
Subject: Re: [PATCH 9/9] mm, page_alloc: optionally disable pcplists during page isolation
Date: Fri, 25 Sep 2020 12:53:03 +0200	[thread overview]
Message-ID: <10cdae53-c64b-e371-1b83-01d1af7a131e@redhat.com> (raw)
In-Reply-To: <20200922143712.12048-10-vbabka@suse.cz>

On 22.09.20 16:37, Vlastimil Babka wrote:
> Page isolation can race with process freeing pages to pcplists in a way that
> a page from isolated pageblock can end up on pcplist. This can be fixed by
> repeated draining of pcplists, as done by patch "mm/memory_hotplug: drain
> per-cpu pages again during memory offline" in [1].
> 
> David and Michal would prefer that this race was closed in a way that callers
> of page isolation who need stronger guarantees don't need to repeatedly drain.
> David suggested disabling pcplists usage completely during page isolation,
> instead of repeatedly draining them.
> 
> To achieve this without adding special cases in alloc/free fastpath, we can use
> the same approach as boot pagesets - when pcp->high is 0, any pcplist addition
> will be immediately flushed.
> 
> The race can thus be closed by setting pcp->high to 0 and draining pcplists
> once, before calling start_isolate_page_range(). The draining will serialize
> after processes that already disabled interrupts and read the old value of
> pcp->high in free_unref_page_commit(), and processes that have not yet disabled
> interrupts, will observe pcp->high == 0 when they are rescheduled, and skip
> pcplists. This guarantees no stray pages on pcplists in zones where isolation
> happens.
> 
> This patch thus adds zone_pcplist_disable() and zone_pcplist_enable() functions
> that page isolation users can call before start_isolate_page_range() and after
> unisolating (or offlining) the isolated pages. A new zone->pcplist_disabled
> atomic variable makes sure we disable only pcplists once and don't enable
> them prematurely in case there are multiple users in parallel.
> 
> We however have to avoid external updates to high and batch by taking
> pcp_batch_high_lock. To allow multiple isolations in parallel, change this lock
> from mutex to rwsem.
> 
> Currently the only user of this functionality is offline_pages().
> 
> [1] https://lore.kernel.org/linux-mm/20200903140032.380431-1-pasha.tatashin@soleen.com/
> 
> Suggested-by: David Hildenbrand <david@redhat.com>
> Suggested-by: Michal Hocko <mhocko@suse.com>
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
>  include/linux/mmzone.h         |  2 ++
>  include/linux/page-isolation.h |  2 ++
>  mm/internal.h                  |  4 ++++
>  mm/memory_hotplug.c            | 28 ++++++++++++----------------
>  mm/page_alloc.c                | 29 ++++++++++++++++++-----------
>  mm/page_isolation.c            | 22 +++++++++++++++++++---
>  6 files changed, 57 insertions(+), 30 deletions(-)
> 
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index 7ad3f14dbe88..3c653d6348b1 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -536,6 +536,8 @@ struct zone {
>  	 * of pageblock. Protected by zone->lock.
>  	 */
>  	unsigned long		nr_isolate_pageblock;
> +	/* Track requests for disabling pcplists */
> +	atomic_t		pcplist_disabled;
>  #endif
>  
>  #ifdef CONFIG_MEMORY_HOTPLUG
> diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h
> index 572458016331..1dec5d0f62a6 100644
> --- a/include/linux/page-isolation.h
> +++ b/include/linux/page-isolation.h
> @@ -38,6 +38,8 @@ struct page *has_unmovable_pages(struct zone *zone, struct page *page,
>  void set_pageblock_migratetype(struct page *page, int migratetype);
>  int move_freepages_block(struct zone *zone, struct page *page,
>  				int migratetype, int *num_movable);
> +void zone_pcplist_disable(struct zone *zone);
> +void zone_pcplist_enable(struct zone *zone);
>  
>  /*
>   * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE.
> diff --git a/mm/internal.h b/mm/internal.h
> index ea66ef45da6c..154e38e702dd 100644
> --- a/mm/internal.h
> +++ b/mm/internal.h
> @@ -7,6 +7,7 @@
>  #ifndef __MM_INTERNAL_H
>  #define __MM_INTERNAL_H
>  
> +#include <linux/rwsem.h>
>  #include <linux/fs.h>
>  #include <linux/mm.h>
>  #include <linux/pagemap.h>
> @@ -199,8 +200,11 @@ extern void post_alloc_hook(struct page *page, unsigned int order,
>  					gfp_t gfp_flags);
>  extern int user_min_free_kbytes;
>  
> +extern struct rw_semaphore pcp_batch_high_lock;
>  extern void zone_pcp_update(struct zone *zone);
>  extern void zone_pcp_reset(struct zone *zone);
> +extern void zone_update_pageset_high_and_batch(struct zone *zone,
> +		unsigned long high, unsigned long batch);
>  
>  #if defined CONFIG_COMPACTION || defined CONFIG_CMA
>  
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index bbde415b558b..6fe9be550160 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -1515,17 +1515,21 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
>  	}
>  	node = zone_to_nid(zone);
>  
> +	/*
> +	 * Disable pcplists so that page isolation cannot race with freeing
> +	 * in a way that pages from isolated pageblock are left on pcplists.
> +	 */
> +	zone_pcplist_disable(zone);
> +
>  	/* set above range as isolated */
>  	ret = start_isolate_page_range(start_pfn, end_pfn,
>  				       MIGRATE_MOVABLE,
>  				       MEMORY_OFFLINE | REPORT_FAILURE);
>  	if (ret) {
>  		reason = "failure to isolate range";
> -		goto failed_removal;
> +		goto failed_removal_pcplists_disabled;
>  	}
>  
> -	__drain_all_pages(zone, true);
> -
>  	arg.start_pfn = start_pfn;
>  	arg.nr_pages = nr_pages;
>  	node_states_check_changes_offline(nr_pages, zone, &arg);
> @@ -1575,20 +1579,8 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
>  			goto failed_removal_isolated;
>  		}
>  
> -		/*
> -		 * per-cpu pages are drained after start_isolate_page_range, but
> -		 * if there are still pages that are not free, make sure that we
> -		 * drain again, because when we isolated range we might have
> -		 * raced with another thread that was adding pages to pcp list.
> -		 *
> -		 * Forward progress should be still guaranteed because
> -		 * pages on the pcp list can only belong to MOVABLE_ZONE
> -		 * because has_unmovable_pages explicitly checks for
> -		 * PageBuddy on freed pages on other zones.
> -		 */
>  		ret = test_pages_isolated(start_pfn, end_pfn, MEMORY_OFFLINE);
> -		if (ret)
> -			__drain_all_pages(zone, true);
> +
>  	} while (ret);
>  
>  	/* Mark all sections offline and remove free pages from the buddy. */
> @@ -1604,6 +1596,8 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
>  	zone->nr_isolate_pageblock -= nr_pages / pageblock_nr_pages;
>  	spin_unlock_irqrestore(&zone->lock, flags);
>  
> +	zone_pcplist_enable(zone);
> +
>  	/* removal success */
>  	adjust_managed_page_count(pfn_to_page(start_pfn), -nr_pages);
>  	zone->present_pages -= nr_pages;
> @@ -1637,6 +1631,8 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
>  failed_removal_isolated:
>  	undo_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE);
>  	memory_notify(MEM_CANCEL_OFFLINE, &arg);
> +failed_removal_pcplists_disabled:
> +	zone_pcplist_enable(zone);
>  failed_removal:
>  	pr_debug("memory offlining [mem %#010llx-%#010llx] failed due to %s\n",
>  		 (unsigned long long) start_pfn << PAGE_SHIFT,
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 33cc35d152b1..673d353f9311 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -78,7 +78,7 @@
>  #include "page_reporting.h"
>  
>  /* prevent >1 _updater_ of zone percpu pageset ->high and ->batch fields */
> -static DEFINE_MUTEX(pcp_batch_high_lock);
> +DECLARE_RWSEM(pcp_batch_high_lock);
>  #define MIN_PERCPU_PAGELIST_FRACTION	(8)
>  
>  #ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
> @@ -6230,6 +6230,18 @@ static void pageset_init(struct per_cpu_pageset *p)
>  	pcp->batch = BOOT_PAGESET_BATCH;
>  }
>  
> +void zone_update_pageset_high_and_batch(struct zone *zone, unsigned long high,
> +		unsigned long batch)
> +{
> +	struct per_cpu_pageset *p;
> +	int cpu;
> +
> +	for_each_possible_cpu(cpu) {
> +		p = per_cpu_ptr(zone->pageset, cpu);
> +		pageset_update(&p->pcp, high, batch);
> +	}
> +}
> +
>  /*
>   * Calculate and set new high and batch values for all per-cpu pagesets of a
>   * zone, based on the zone's size and the percpu_pagelist_fraction sysctl.
> @@ -6237,8 +6249,6 @@ static void pageset_init(struct per_cpu_pageset *p)
>  static void zone_set_pageset_high_and_batch(struct zone *zone)
>  {
>  	unsigned long new_high, new_batch;
> -	struct per_cpu_pageset *p;
> -	int cpu;
>  
>  	if (percpu_pagelist_fraction) {
>  		new_high = zone_managed_pages(zone) / percpu_pagelist_fraction;
> @@ -6259,10 +6269,7 @@ static void zone_set_pageset_high_and_batch(struct zone *zone)
>  		return;
>  	}
>  
> -	for_each_possible_cpu(cpu) {
> -		p = per_cpu_ptr(zone->pageset, cpu);
> -		pageset_update(&p->pcp, new_high, new_batch);
> -	}
> +	zone_update_pageset_high_and_batch(zone, new_high, new_batch);
>  }
>  
>  void __meminit setup_zone_pageset(struct zone *zone)
> @@ -8024,7 +8031,7 @@ int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *table, int write,
>  	int old_percpu_pagelist_fraction;
>  	int ret;
>  
> -	mutex_lock(&pcp_batch_high_lock);
> +	down_write(&pcp_batch_high_lock);
>  	old_percpu_pagelist_fraction = percpu_pagelist_fraction;
>  
>  	ret = proc_dointvec_minmax(table, write, buffer, length, ppos);
> @@ -8046,7 +8053,7 @@ int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *table, int write,
>  	for_each_populated_zone(zone)
>  		zone_set_pageset_high_and_batch(zone);
>  out:
> -	mutex_unlock(&pcp_batch_high_lock);
> +	up_write(&pcp_batch_high_lock);
>  	return ret;
>  }
>  
> @@ -8652,9 +8659,9 @@ EXPORT_SYMBOL(free_contig_range);
>   */
>  void __meminit zone_pcp_update(struct zone *zone)
>  {
> -	mutex_lock(&pcp_batch_high_lock);
> +	down_write(&pcp_batch_high_lock);
>  	zone_set_pageset_high_and_batch(zone);
> -	mutex_unlock(&pcp_batch_high_lock);
> +	up_write(&pcp_batch_high_lock);
>  }
>  
>  void zone_pcp_reset(struct zone *zone)
> diff --git a/mm/page_isolation.c b/mm/page_isolation.c
> index 57d8bc1e7760..c0e895e8f322 100644
> --- a/mm/page_isolation.c
> +++ b/mm/page_isolation.c
> @@ -15,6 +15,22 @@
>  #define CREATE_TRACE_POINTS
>  #include <trace/events/page_isolation.h>
>  
> +void zone_pcplist_disable(struct zone *zone)
> +{
> +	down_read(&pcp_batch_high_lock);
> +	if (atomic_inc_return(&zone->pcplist_disabled) == 1) {
> +		zone_update_pageset_high_and_batch(zone, 0, 1);
> +		__drain_all_pages(zone, true);
> +	}

Hm, if one CPU is still inside the if-clause, the other one would
continue, however pcp wpould not be disabled and zones not drained when
returning.

(while we only allow a single Offline_pages() call, it will be different
when we use the function in other context - especially,
alloc_contig_range() for some users)

Can't we use down_write() here? So it's serialized and everybody has to
properly wait. (and we would not have to rely on an atomic_t)

> +}
> +
> +void zone_pcplist_enable(struct zone *zone)
> +{
> +	if (atomic_dec_return(&zone->pcplist_disabled) == 0)
> +		zone_update_pageset_high_and_batch(zone, zone->pageset_high, zone->pageset_batch);
> +	up_read(&pcp_batch_high_lock);
> +}
> +
>  static int set_migratetype_isolate(struct page *page, int migratetype, int isol_flags)
>  {
>  	struct zone *zone = page_zone(page);

In general, I like that approach. But I do wonder if we can tweak the
rwsem + atomic_t handling.

-- 
Thanks,

David / dhildenb



  reply	other threads:[~2020-09-25 10:53 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-22 14:37 [PATCH 0/9] disable pcplists during memory offline Vlastimil Babka
2020-09-22 14:37 ` [PATCH 1/9] mm, page_alloc: clean up pageset high and batch update Vlastimil Babka
2020-09-25 10:18   ` David Hildenbrand
2020-10-05 12:03   ` Michal Hocko
2020-09-22 14:37 ` [PATCH 2/9] mm, page_alloc: calculate pageset high and batch once per zone Vlastimil Babka
2020-10-05 12:52   ` Michal Hocko
2020-10-06 22:04     ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 3/9] mm, page_alloc: remove setup_pageset() Vlastimil Babka
2020-09-25 10:19   ` David Hildenbrand
2020-10-05 12:59   ` Michal Hocko
2020-10-06 22:11     ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 4/9] mm, page_alloc: simplify pageset_update() Vlastimil Babka
2020-09-25 10:23   ` David Hildenbrand
2020-10-05 13:20   ` Michal Hocko
2020-09-22 14:37 ` [PATCH 5/9] mm, page_alloc: make per_cpu_pageset accessible only after init Vlastimil Babka
2020-09-25 10:25   ` David Hildenbrand
2020-10-05 13:24   ` Michal Hocko
2020-10-06 22:28     ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 6/9] mm, page_alloc: cache pageset high and batch in struct zone Vlastimil Babka
2020-09-25 10:34   ` David Hildenbrand
2020-10-06 22:31     ` Vlastimil Babka
2020-10-05 13:28   ` Michal Hocko
2020-10-06 22:34     ` Vlastimil Babka
2020-09-22 14:37 ` [PATCH 7/9] mm, page_alloc: move draining pcplists to page isolation users Vlastimil Babka
2020-09-25 10:39   ` David Hildenbrand
2020-10-05 13:57   ` Michal Hocko
2020-09-22 14:37 ` [PATCH 8/9] mm, page_alloc: drain all pcplists during memory offline Vlastimil Babka
2020-09-25 10:46   ` David Hildenbrand
2020-10-05 14:03     ` Michal Hocko
2020-09-22 14:37 ` [PATCH 9/9] mm, page_alloc: optionally disable pcplists during page isolation Vlastimil Babka
2020-09-25 10:53   ` David Hildenbrand [this message]
2020-09-25 10:54     ` David Hildenbrand
2020-09-25 11:10       ` Vlastimil Babka
2020-10-01  8:47         ` David Hildenbrand
2020-10-05 14:05         ` Michal Hocko
2020-10-05 14:22           ` Vlastimil Babka
2020-10-05 16:56             ` Michal Hocko
2020-10-06  8:34   ` Michal Hocko
2020-10-06  8:40     ` David Hildenbrand
2020-10-06 10:05       ` Michal Hocko
2020-09-22 17:15 ` [PATCH 0/9] disable pcplists during memory offline David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=10cdae53-c64b-e371-1b83-01d1af7a131e@redhat.com \
    --to=david@redhat.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=mhocko@suse.com \
    --cc=osalvador@suse.de \
    --cc=pasha.tatashin@soleen.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).