* [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a
@ 2019-05-03 8:53 Simon Goldschmidt
2019-05-03 10:00 ` Marek Vasut
0 siblings, 1 reply; 4+ messages in thread
From: Simon Goldschmidt @ 2019-05-03 8:53 UTC (permalink / raw)
To: Marek Vasut, linux-mtd
Cc: Boris Brezillon, Richard Weinberger, Simon Goldschmidt,
linux-kernel, Tudor Ambarus, Brian Norris, David Woodhouse
Tested on socfpga cyclone5 where this is required to ensure that the
boot rom can access this flash after warm reboot.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
---
drivers/mtd/spi-nor/spi-nor.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index fae147452..4cdec2cc2 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1874,7 +1874,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a
2019-05-03 8:53 [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a Simon Goldschmidt
@ 2019-05-03 10:00 ` Marek Vasut
2019-05-03 10:37 ` Simon Goldschmidt
0 siblings, 1 reply; 4+ messages in thread
From: Marek Vasut @ 2019-05-03 10:00 UTC (permalink / raw)
To: Simon Goldschmidt, linux-mtd
Cc: Tudor Ambarus, Richard Weinberger, Boris Brezillon, linux-kernel,
Brian Norris, David Woodhouse
On 5/3/19 10:53 AM, Simon Goldschmidt wrote:
> Tested on socfpga cyclone5 where this is required to ensure that the
> boot rom can access this flash after warm reboot.
Are you sure _all_ variants of the N25Q256 support 4NB opcodes ?
I think there were some which didn't, but I might be wrong.
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
> ---
>
> drivers/mtd/spi-nor/spi-nor.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index fae147452..4cdec2cc2 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1874,7 +1874,7 @@ static const struct flash_info spi_nor_ids[] = {
> { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
> { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
> { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
>
--
Best regards,
Marek Vasut
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a
2019-05-03 10:00 ` Marek Vasut
@ 2019-05-03 10:37 ` Simon Goldschmidt
2019-05-03 11:27 ` Marek Vasut
0 siblings, 1 reply; 4+ messages in thread
From: Simon Goldschmidt @ 2019-05-03 10:37 UTC (permalink / raw)
To: Marek Vasut
Cc: Boris Brezillon, Richard Weinberger, Tudor Ambarus, linux-kernel,
linux-mtd, Brian Norris, David Woodhouse
On Fri, May 3, 2019 at 12:00 PM Marek Vasut <marek.vasut@gmail.com> wrote:
>
> On 5/3/19 10:53 AM, Simon Goldschmidt wrote:
> > Tested on socfpga cyclone5 where this is required to ensure that the
> > boot rom can access this flash after warm reboot.
>
> Are you sure _all_ variants of the N25Q256 support 4NB opcodes ?
> I think there were some which didn't, but I might be wrong.
Oh, damn, you're right. The documentation [1] statest that 4-byte erase and
program opcodes are only supported for part numbers N25Q256A83ESF40x,
N25Q256A83E1240x and N25QA83ESFA0F.
Any idea of how I can still enable 4-byte opcodes for my chip?
Regards,
Simon
>
> > Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
> > ---
> >
> > drivers/mtd/spi-nor/spi-nor.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index fae147452..4cdec2cc2 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -1874,7 +1874,7 @@ static const struct flash_info spi_nor_ids[] = {
> > { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
> > { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> > { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
> > - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> > + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
> > { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
> > { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> > { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
> >
>
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a
2019-05-03 10:37 ` Simon Goldschmidt
@ 2019-05-03 11:27 ` Marek Vasut
0 siblings, 0 replies; 4+ messages in thread
From: Marek Vasut @ 2019-05-03 11:27 UTC (permalink / raw)
To: Simon Goldschmidt
Cc: Boris Brezillon, Richard Weinberger, Tudor Ambarus, linux-kernel,
linux-mtd, Brian Norris, David Woodhouse
On 5/3/19 12:37 PM, Simon Goldschmidt wrote:
> On Fri, May 3, 2019 at 12:00 PM Marek Vasut <marek.vasut@gmail.com> wrote:
>>
>> On 5/3/19 10:53 AM, Simon Goldschmidt wrote:
>>> Tested on socfpga cyclone5 where this is required to ensure that the
>>> boot rom can access this flash after warm reboot.
>>
>> Are you sure _all_ variants of the N25Q256 support 4NB opcodes ?
>> I think there were some which didn't, but I might be wrong.
>
> Oh, damn, you're right. The documentation [1] statest that 4-byte erase and
> program opcodes are only supported for part numbers N25Q256A83ESF40x,
> N25Q256A83E1240x and N25QA83ESFA0F.
;-)
> Any idea of how I can still enable 4-byte opcodes for my chip?
Maybe SFDP tables contains some information whether the chip supports
the 4B opcodes ?
--
Best regards,
Marek Vasut
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-05-03 11:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-03 8:53 [PATCH] mtd: spi-nor: enable 4B opcodes for n25q256a Simon Goldschmidt
2019-05-03 10:00 ` Marek Vasut
2019-05-03 10:37 ` Simon Goldschmidt
2019-05-03 11:27 ` Marek Vasut
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).