Linux-mtd Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 00/40] Introduce the generic ECC engine abstraction
@ 2019-09-19 19:31 Miquel Raynal
  2019-09-19 19:31 ` [PATCH v3 01/40] mtd: rawnand: Avoid a typedef Miquel Raynal
                   ` (39 more replies)
  0 siblings, 40 replies; 56+ messages in thread
From: Miquel Raynal @ 2019-09-19 19:31 UTC (permalink / raw)
  To: Richard Weinberger, David Woodhouse, Brian Norris, Marek Vasut,
	Tudor Ambarus, Vignesh Raghavendra
  Cc: Tudor Ambarus, Julien Su, Schrempf Frieder, Paul Cercueil,
	Boris Brezillon, linux-mtd, Thomas Petazzoni, Miquel Raynal,
	Mason Yang, linux-arm-kernel

As of today, only raw NAND controllers used to feature an integrated
ECC engine and so controller drivers always embedded some code to
enable/disable the correction.

This statement is no longer correct as SPI-NAND devices might not
embed an on-die ECC engine and must make use of an external ECC
engine. We figured there are three possible situations for (generic)
NAND devices: either the engine is 'on-die' (most of the SPI-NANDs, a
few raw NANDs), or the engine is part of the host controller (most raw
NANDs), or the engine may be external (SPI controllers might feature
an hardware ECC engine, otherwise software correction can also be
used).


To solve this situation, this is a proposal on how to make things
work. We want to create an ECC engine object which has simple
callbacks:
* init/cleanup its context
* prepare an I/O operation
* finish an I/O operation
Details about what is going to happen in these callbacks is described
in drivers/mtd/nand/ecc/engine.c.

The logic in this series is:
1/ Use the generic NAND core for all NAND devices (raw and SPI).
2/ Create the ECC engine interface in drivers/mtd/nand/ecc.c
3/ Move code in driver/mtd/nand/ecc.c
4/ Make both software engines (Hamming and BCH) generic, move them in
   the ecc/ directory, clean them a bit and instantiate ECC
   engines. Write raw NAND helpers to use these two new engines.
5/ Isolate SPI-NAND on-die ECC engine in its own driver.
6/ Make use from the SPI-NAND layer of all the ECC engines listed
   above (on user request, people can now make use of soft BCH if they
   don't have an ECC-engine).
7/ Extend the logic to hardware external engines. A proposal of a
   driver for Macronix external ECC engine will follow in another
   series.

This work is now almost ready, the next steps are:
1/ Migrate the raw NAND core to make a proper use of these ECC
   engines.
2/ Deprecate in the raw NAND subsystem the interfaces used until now
   (I expect we should get rid of a lot of boilerplate).


Thanks,
Miquèl


Changes in v3
=============
* Added Boris' Reviewed-by tags.
* Added a kernel doc header on the nand_page_io_req enumeration.
* Added support for HW engines.
* Droped the patch clarifying the value of the first entry in
  enumerations (which is always 0).
* Rename the nand_ecc_conf structure as nand_ecc_props because the
  _conf suffix implies that it is possible to edit it, while in some
  cases (eg. on-die ECC) there is nothing to tweak.
* Smoother introduction of the ECC engine abstraction.
* Renamed the ECC engine module nand_ecc_engine.ko.
* Moved all the ECC files into drivers/mtd/nand/. Forgot the ecc/
  subdirectory.
* Added a new series to drop the ECC mode enumeration wich mixes the
  provider (none, hw, sw, on-die) and the OOB placement (first,
  syndrome).
* Various typos fixed.
* Added a few patches to fix bugs found in SPI-NAND/mtdchar.c.
* Introduced the external hardware ECC engine boilerplate.

Changes in v2
=============
* SPDX license identifiers for soft BCH and Hamming: the license macro
  was right, "GPL" means "GPLv2 or higher", so do not change this
  portion. Also update the commit messages to fit the actual change.
* Do not compile-in the NAND core by default, do it only for raw
  NAND. Remove the dependencies on CONFIG_MTD in a different
  patch. Also, keep an extra level of hierarchy in Kconfig for the
  NAND bits by adding a menu instead of a config.
* Moved the standard OOB layouts in the ecc/engine.c driver instead of
  in the NAND core.
* Used the nand_ecc_ prefix in most of the engines functions instead
  of just ecc_, which is now reserved for bare helpers. Get rid of the
  __ecc prefix.
* In the sunxi NAND controller driver: moved the ECC structure from
  sunxi_nfc to sunxi_nand_chip as the ECC engine is per-chip and not
  per controller.
* Software Hamming ECC engine is only enabled by default if raw NAND
  is also enabled. NDFC now selects the software Hamming ECC engine
  (instead of depending on it).
* Mention in software BCH and Hamming Kconfig entries that booting
  from NAND is very likely to fail if the user selects these symbols
  as modules.
* Added Boris Reviewed-by tag on the SPI-NAND typo fixing patch.
* Renamed the "mode" into a "provider" entry in the ECC configuration
  structures.
* Moved the "total" entry of the ECC configuration directly in the
  context structure (should probably not be public but let's keep it
  as is for now).
* Split the generic ECC engine introduction into smaller patches to do
  some renaming aside.
* Drop the "maximize" entry in the ECC engine configuration structure,
  keep using a flag like before.
* Canceled the move of the SPI-NAND specific ECC engine out of the
  core file.
* Amended the root ECC structures to have three nand_ecc_conf
  structures: one for the defaults, one for the chip requirements, one
  for the user desires.
* Created a *ondie_engine pointer in the nand_ecc structure to save
  the on-die ECC engine, if any. For instance, saving a reference to
  this engine is done by the SPI-NAND core.
* Dropped the SPI-NAND flag that was used to distinguish between NAND
  flavors from the NAND core, it should not be needed anymore.
* Added an helper in the NAND core to put a reference on an ECC
  engine. This will be used by the hardware engines only.
* Renamed the files ecc/sw-{bch,hamming}.c and their headers
  include/linux/mtd/nand-ecc-sw-{bch,hamming}-engine.h.
* Created a MTD_NAND_ECC invisible Kconfig symbol.
* Added plenty of missing EXPORT_SYMBOL{,_GPL}().
* Minor modifications so that everything still compiles even when
  modules and built-in drivers are mixed in Kconfig in the whole NAND
  directory.


Miquel Raynal (40):
  mtd: rawnand: Avoid a typedef
  mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
  mtd: rawnand: Create a new enumeration to describe OOB placement
  mtd: rawnand: Separate the ECC engine type and the OOB placement
  mtd: rawnand: Create a new enumeration to describe properly ECC types
  mtd: rawnand: Use the new ECC engine type enumeration
  mtd: rawnand: Drop the legacy ECC type enumeration
  mtd: nand: Move nand_device forward declaration to the top
  mtd: nand: Add an extra level in the Kconfig hierarchy
  mtd: nand: Drop useless 'depends on' in Kconfig
  mtd: nand: Add a NAND page I/O request type
  mtd: nand: Rename a core structure
  mtd: nand: Add more parameters to the nand_ecc_props structure
  mtd: nand: Introduce the ECC engine abstraction
  mtd: nand: Convert the generic NAND layer to the generic ECC framework
  mtd: Fix typo in mtd_ooblayout_set_databytes() description
  mtd: nand: Move standard OOB layouts to the generic ECC core
  mtd: nand: Move ECC specific functions to the ECC core
  mtd: nand: ecc: Turn the software BCH implementation generic
  mtd: rawnand: Get rid of chip->ecc.priv
  mtd: nand: ecc: Move Hamming code to the generic NAND layer
  mtd: nand: ecc: Clarify the software Hamming introductory line
  mtd: nand: ecc: Turn the software Hamming implementation generic
  mtd: nand: Remove useless include about software Hamming ECC
  mtd: nand: ecc: Let the software Hamming ECC engine be unselected
  mtd: nand: ecc: Create the software BCH engine instance
  mtd: nand: ecc: Create the software Hamming engine instance
  mtd: nand: Let software ECC engines be retrieved from the NAND core
  mtd: spinand: Fix typo in comment
  mtd: spinand: Move ECC related definitions earlier in the driver
  mtd: spinand: Instantiate a SPI-NAND on-die ECC engine
  mtd: nand: Let on-die ECC engines be retrieved from the NAND core
  mtd: rawnand: Fill a default ECC provider/algorithm
  mtd: spinand: Fill a default ECC provider/algorithm
  mtd: nand: Add helpers to manage ECC engines and configurations
  mtd: spinand: Use the external ECC engine logic
  mtd: spinand: Propagate ECC information to the MTD structure
  mtd: spinand: Allow the case where there is no ECC engine
  mtd: spinand: Fix OOB read
  mtd: nand: ecc: Add infrastructure to support hardware engines

 arch/arm/mach-davinci/board-da830-evm.c       |   2 +-
 arch/arm/mach-davinci/board-da850-evm.c       |   2 +-
 arch/arm/mach-davinci/board-dm355-evm.c       |   2 +-
 arch/arm/mach-davinci/board-dm355-leopard.c   |   3 +-
 arch/arm/mach-davinci/board-dm365-evm.c       |   2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c      |   2 +-
 arch/arm/mach-davinci/board-dm646x-evm.c      |   2 +-
 arch/arm/mach-davinci/board-mityomapl138.c    |   2 +-
 arch/arm/mach-davinci/board-neuros-osd2.c     |   2 +-
 arch/arm/mach-davinci/board-omapl138-hawk.c   |   2 +-
 arch/arm/mach-s3c24xx/common-smdk.c           |   3 +-
 arch/arm/mach-s3c24xx/mach-anubis.c           |   3 +-
 arch/arm/mach-s3c24xx/mach-at2440evb.c        |   3 +-
 arch/arm/mach-s3c24xx/mach-bast.c             |   3 +-
 arch/arm/mach-s3c24xx/mach-gta02.c            |   3 +-
 arch/arm/mach-s3c24xx/mach-jive.c             |   3 +-
 arch/arm/mach-s3c24xx/mach-mini2440.c         |   3 +-
 arch/arm/mach-s3c24xx/mach-osiris.c           |   3 +-
 arch/arm/mach-s3c24xx/mach-qt2410.c           |   3 +-
 arch/arm/mach-s3c24xx/mach-rx1950.c           |   2 +-
 arch/arm/mach-s3c24xx/mach-rx3715.c           |   3 +-
 arch/arm/mach-s3c24xx/mach-vstms.c            |   3 +-
 arch/arm/mach-s3c64xx/mach-hmt.c              |   2 +-
 arch/arm/mach-s3c64xx/mach-mini6410.c         |   2 +-
 arch/arm/mach-s3c64xx/mach-real6410.c         |   2 +-
 drivers/mtd/mtdcore.c                         |   2 +-
 drivers/mtd/nand/Kconfig                      |  43 ++
 drivers/mtd/nand/Makefile                     |   4 +
 drivers/mtd/nand/core.c                       | 128 ++++
 drivers/mtd/nand/ecc-sw-bch.c                 | 423 +++++++++++
 .../nand/{raw/nand_ecc.c => ecc-sw-hamming.c} | 331 +++++++--
 drivers/mtd/nand/ecc.c                        | 614 ++++++++++++++++
 drivers/mtd/nand/onenand/Kconfig              |   1 -
 drivers/mtd/nand/raw/Kconfig                  |  25 +-
 drivers/mtd/nand/raw/Makefile                 |   2 -
 drivers/mtd/nand/raw/ams-delta.c              |   2 +-
 drivers/mtd/nand/raw/atmel/nand-controller.c  |  22 +-
 drivers/mtd/nand/raw/au1550nd.c               |   2 +-
 .../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c  |   2 +-
 drivers/mtd/nand/raw/brcmnand/brcmnand.c      |   4 +-
 drivers/mtd/nand/raw/cafe_nand.c              |   3 +-
 drivers/mtd/nand/raw/cmx270_nand.c            |   2 +-
 drivers/mtd/nand/raw/cs553x_nand.c            |   5 +-
 drivers/mtd/nand/raw/davinci_nand.c           |  22 +-
 drivers/mtd/nand/raw/denali.c                 |   6 +-
 drivers/mtd/nand/raw/diskonchip.c             |   3 +-
 drivers/mtd/nand/raw/fsl_elbc_nand.c          |  13 +-
 drivers/mtd/nand/raw/fsl_ifc_nand.c           |   7 +-
 drivers/mtd/nand/raw/fsl_upm.c                |   3 +-
 drivers/mtd/nand/raw/fsmc_nand.c              |  13 +-
 drivers/mtd/nand/raw/gpio.c                   |   2 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c    |  14 +-
 drivers/mtd/nand/raw/hisi504_nand.c           |   6 +-
 .../mtd/nand/raw/ingenic/ingenic_nand_drv.c   |  10 +-
 drivers/mtd/nand/raw/ingenic/jz4740_nand.c    |   3 +-
 drivers/mtd/nand/raw/lpc32xx_mlc.c            |   3 +-
 drivers/mtd/nand/raw/lpc32xx_slc.c            |   6 +-
 drivers/mtd/nand/raw/marvell_nand.c           |  21 +-
 drivers/mtd/nand/raw/meson_nand.c             |   2 +-
 drivers/mtd/nand/raw/mpc5121_nfc.c            |   2 +-
 drivers/mtd/nand/raw/mtk_nand.c               |   8 +-
 drivers/mtd/nand/raw/mxc_nand.c               |  20 +-
 drivers/mtd/nand/raw/nand_base.c              | 687 +++++++-----------
 drivers/mtd/nand/raw/nand_bch.c               | 218 ------
 drivers/mtd/nand/raw/nand_esmt.c              |  11 +-
 drivers/mtd/nand/raw/nand_hynix.c             |  41 +-
 drivers/mtd/nand/raw/nand_jedec.c             |   4 +-
 drivers/mtd/nand/raw/nand_micron.c            |  18 +-
 drivers/mtd/nand/raw/nand_onfi.c              |   8 +-
 drivers/mtd/nand/raw/nand_samsung.c           |  19 +-
 drivers/mtd/nand/raw/nand_toshiba.c           |  15 +-
 drivers/mtd/nand/raw/nandsim.c                |   7 +-
 drivers/mtd/nand/raw/ndfc.c                   |   5 +-
 drivers/mtd/nand/raw/nuc900_nand.c            |   2 +-
 drivers/mtd/nand/raw/omap2.c                  |  50 +-
 drivers/mtd/nand/raw/orion_nand.c             |   2 +-
 drivers/mtd/nand/raw/pasemi_nand.c            |   3 +-
 drivers/mtd/nand/raw/plat_nand.c              |   2 +-
 drivers/mtd/nand/raw/qcom_nandc.c             |   2 +-
 drivers/mtd/nand/raw/r852.c                   |   3 +-
 drivers/mtd/nand/raw/s3c2410.c                |   9 +-
 drivers/mtd/nand/raw/sh_flctl.c               |   4 +-
 drivers/mtd/nand/raw/sharpsl.c                |   5 +-
 drivers/mtd/nand/raw/socrates_nand.c          |   2 +-
 drivers/mtd/nand/raw/stm32_fmc2_nand.c        |   8 +-
 drivers/mtd/nand/raw/sunxi_nand.c             |  53 +-
 drivers/mtd/nand/raw/tango_nand.c             |   2 +-
 drivers/mtd/nand/raw/tegra_nand.c             |  14 +-
 drivers/mtd/nand/raw/tmio_nand.c              |   9 +-
 drivers/mtd/nand/raw/txx9ndfmc.c              |   7 +-
 drivers/mtd/nand/raw/vf610_nfc.c              |   4 +-
 drivers/mtd/nand/raw/xway_nand.c              |   2 +-
 drivers/mtd/nand/spi/Kconfig                  |   1 +
 drivers/mtd/nand/spi/core.c                   | 300 +++++---
 drivers/mtd/nand/spi/macronix.c               |   6 +-
 drivers/mtd/nand/spi/on-die-ecc-engine.c      |   0
 drivers/mtd/nand/spi/toshiba.c                |   6 +-
 drivers/mtd/sm_ftl.c                          |  30 +-
 drivers/mtd/tests/mtd_nandecctest.c           |  31 +-
 include/linux/mtd/nand-ecc-sw-bch.h           |  80 ++
 include/linux/mtd/nand-ecc-sw-hamming.h       |  99 +++
 include/linux/mtd/nand.h                      | 188 ++++-
 include/linux/mtd/nand_bch.h                  |  66 --
 include/linux/mtd/nand_ecc.h                  |  39 -
 include/linux/mtd/rawnand.h                   |  48 +-
 include/linux/mtd/sharpsl.h                   |   1 -
 include/linux/mtd/spinand.h                   |  13 +-
 include/linux/platform_data/mtd-davinci.h     |   9 +-
 .../linux/platform_data/mtd-nand-s3c2410.h    |   2 +-
 109 files changed, 2650 insertions(+), 1326 deletions(-)
 create mode 100644 drivers/mtd/nand/ecc-sw-bch.c
 rename drivers/mtd/nand/{raw/nand_ecc.c => ecc-sw-hamming.c} (60%)
 create mode 100644 drivers/mtd/nand/ecc.c
 delete mode 100644 drivers/mtd/nand/raw/nand_bch.c
 create mode 100644 drivers/mtd/nand/spi/on-die-ecc-engine.c
 create mode 100644 include/linux/mtd/nand-ecc-sw-bch.h
 create mode 100644 include/linux/mtd/nand-ecc-sw-hamming.h
 delete mode 100644 include/linux/mtd/nand_bch.h
 delete mode 100644 include/linux/mtd/nand_ecc.h

-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 56+ messages in thread

end of thread, back to index

Thread overview: 56+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-19 19:31 [PATCH v3 00/40] Introduce the generic ECC engine abstraction Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 01/40] mtd: rawnand: Avoid a typedef Miquel Raynal
2019-10-12  8:41   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 02/40] mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones Miquel Raynal
2019-10-12  8:48   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 03/40] mtd: rawnand: Create a new enumeration to describe OOB placement Miquel Raynal
2019-10-12  9:02   ` Boris Brezillon
2019-10-12  9:07     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 04/40] mtd: rawnand: Separate the ECC engine type and the " Miquel Raynal
2019-10-12  9:05   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 05/40] mtd: rawnand: Create a new enumeration to describe properly ECC types Miquel Raynal
2019-10-12  9:14   ` Boris Brezillon
2019-10-12  9:55   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 06/40] mtd: rawnand: Use the new ECC engine type enumeration Miquel Raynal
2019-10-12  9:15   ` Boris Brezillon
2019-10-12  9:17   ` Boris Brezillon
2019-10-12  9:28   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 07/40] mtd: rawnand: Drop the legacy ECC " Miquel Raynal
2019-10-12  9:29   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 08/40] mtd: nand: Move nand_device forward declaration to the top Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 09/40] mtd: nand: Add an extra level in the Kconfig hierarchy Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 10/40] mtd: nand: Drop useless 'depends on' in Kconfig Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 11/40] mtd: nand: Add a NAND page I/O request type Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 12/40] mtd: nand: Rename a core structure Miquel Raynal
2019-10-12  9:35   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 13/40] mtd: nand: Add more parameters to the nand_ecc_props structure Miquel Raynal
2019-10-12  9:37   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 14/40] mtd: nand: Introduce the ECC engine abstraction Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 15/40] mtd: nand: Convert the generic NAND layer to the generic ECC framework Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 16/40] mtd: Fix typo in mtd_ooblayout_set_databytes() description Miquel Raynal
2019-10-12 10:58   ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 17/40] mtd: nand: Move standard OOB layouts to the generic ECC core Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 18/40] mtd: nand: Move ECC specific functions to the " Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 19/40] mtd: nand: ecc: Turn the software BCH implementation generic Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 20/40] mtd: rawnand: Get rid of chip->ecc.priv Miquel Raynal
2019-09-20  6:18   ` Maxime Ripard
2019-09-19 19:31 ` [PATCH v3 21/40] mtd: nand: ecc: Move Hamming code to the generic NAND layer Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 22/40] mtd: nand: ecc: Clarify the software Hamming introductory line Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 23/40] mtd: nand: ecc: Turn the software Hamming implementation generic Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 24/40] mtd: nand: Remove useless include about software Hamming ECC Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 25/40] mtd: nand: ecc: Let the software Hamming ECC engine be unselected Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 26/40] mtd: nand: ecc: Create the software BCH engine instance Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 27/40] mtd: nand: ecc: Create the software Hamming " Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 28/40] mtd: nand: Let software ECC engines be retrieved from the NAND core Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 29/40] mtd: spinand: Fix typo in comment Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 30/40] mtd: spinand: Move ECC related definitions earlier in the driver Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 31/40] mtd: spinand: Instantiate a SPI-NAND on-die ECC engine Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 32/40] mtd: nand: Let on-die ECC engines be retrieved from the NAND core Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 33/40] mtd: rawnand: Fill a default ECC provider/algorithm Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 34/40] mtd: spinand: " Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 35/40] mtd: nand: Add helpers to manage ECC engines and configurations Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 36/40] mtd: spinand: Use the external ECC engine logic Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 37/40] mtd: spinand: Propagate ECC information to the MTD structure Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 38/40] mtd: spinand: Allow the case where there is no ECC engine Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 39/40] mtd: spinand: Fix OOB read Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 40/40] mtd: nand: ecc: Add infrastructure to support hardware engines Miquel Raynal

Linux-mtd Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mtd/0 linux-mtd/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mtd linux-mtd/ https://lore.kernel.org/linux-mtd \
		linux-mtd@lists.infradead.org
	public-inbox-index linux-mtd

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-mtd


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git