linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Johan Jonker <jbx6244@gmail.com>
Cc: richard@nod.at, vigneshr@ti.com, heiko@sntech.de,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, yifeng.zhao@rock-chips.com
Subject: Re: [PATCH v3 2/3] mtd: rawnand: rockchip-nand-controller: copy hwecc PA data to oob_poi buffer
Date: Tue, 4 Jul 2023 17:08:58 +0200	[thread overview]
Message-ID: <20230704170858.2a64c181@xps-13> (raw)
In-Reply-To: <539cfba7-dd6f-015e-b990-a2335cb3aac9@gmail.com>

Hi Johan,

jbx6244@gmail.com wrote on Thu, 15 Jun 2023 19:34:13 +0200:

> Rockchip boot blocks are written per 4 x 512 byte sectors per page.
> Each page must have a page address (PA) pointer in OOB to the next page.

Only when used as boot device I guess? It's a BootROM limitation.

> Pages are written in a pattern depending on the NAND chip ID.
> This logic used to build a page pattern table is not fully disclosed and
> is not easy to fit in the MTD framework.
> The formula in rk_nfc_write_page_hwecc() function is not correct.
> Make hwecc and raw behavior identical.

So this is a fix as well, deserves a tag. Whatever the reason why you
need this, the issue you are solving is: write_page_hwecc and
write_page_raw are not aligned.

> Generate boot block page address and pattern for hwecc in user space
> and copy PA data to/from the already reserved last 4 bytes before EEC

ECC

> in the chip->oob_poi data layout.
> 
> This patch breaks all existing jffs2 users that have free OOB overlap
> with the reserved space for PA data.
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V3:
>   Change prefixes
>   Reword
> ---
>  .../mtd/nand/raw/rockchip-nand-controller.c   | 34 ++++++++++++-------
>  1 file changed, 21 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c
> index 37fc07ba5..5a0468034 100644
> --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c
> +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c
> @@ -598,7 +598,7 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	int pages_per_blk = mtd->erasesize / mtd->writesize;
>  	int ret = 0, i, boot_rom_mode = 0;
>  	dma_addr_t dma_data, dma_oob;
> -	u32 reg;
> +	u32 tmp;
>  	u8 *oob;
> 
>  	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
> @@ -625,6 +625,13 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	 *
>  	 *   0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ...
>  	 *
> +	 * The code here just swaps the first 4 bytes with the last
> +	 * 4 bytes without losing any data.
> +	 *
> +	 * The chip->oob_poi data layout:
> +	 *
> +	 *    BBM  OOB1 OOB2 OOB3 |......|  PA0  PA1  PA2  PA3
> +	 *
>  	 * Configure the ECC algorithm supported by the boot ROM.
>  	 */
>  	if ((page < (pages_per_blk * rknand->boot_blks)) &&
> @@ -635,21 +642,17 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	}
> 
>  	for (i = 0; i < ecc->steps; i++) {
> -		if (!i) {
> -			reg = 0xFFFFFFFF;
> -		} else {
> +		if (!i)
> +			oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE;
> +		else
>  			oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> -			reg = oob[0] | oob[1] << 8 | oob[2] << 16 |
> -			      oob[3] << 24;
> -		}
> 
> -		if (!i && boot_rom_mode)

So we no longer need boot_rom_mode? Or do we?

> -			reg = (page & (pages_per_blk - 1)) * 4;
> +		tmp = oob[0] | oob[1] << 8 | oob[2] << 16 | oob[3] << 24;
> 
>  		if (nfc->cfg->type == NFC_V9)
> -			nfc->oob_buf[i] = reg;
> +			nfc->oob_buf[i] = tmp;
>  		else
> -			nfc->oob_buf[i * (oob_step / 4)] = reg;
> +			nfc->oob_buf[i * (oob_step / 4)] = tmp;
>  	}
> 
>  	dma_data = dma_map_single(nfc->dev, (void *)nfc->page_buf,
> @@ -812,12 +815,17 @@ static int rk_nfc_read_page_hwecc(struct nand_chip *chip, u8 *buf, int oob_on,
>  		goto timeout_err;
>  	}
> 
> -	for (i = 1; i < ecc->steps; i++) {
> -		oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> +	for (i = 0; i < ecc->steps; i++) {
> +		if (!i)
> +			oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE;
> +		else
> +			oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> +
>  		if (nfc->cfg->type == NFC_V9)
>  			tmp = nfc->oob_buf[i];
>  		else
>  			tmp = nfc->oob_buf[i * (oob_step / 4)];
> +
>  		*oob++ = (u8)tmp;
>  		*oob++ = (u8)(tmp >> 8);
>  		*oob++ = (u8)(tmp >> 16);
> --
> 2.30.2
> 


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2023-07-04 15:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 17:32 [PATCH v3 0/3] Fixes for Rockchip NAND controller driver Johan Jonker
2023-06-15 17:34 ` [PATCH v3 1/3] mtd: rawnand: rockchip-nand-controller: fix oobfree offset and description Johan Jonker
2023-07-04 15:03   ` Miquel Raynal
2023-06-15 17:34 ` [PATCH v3 2/3] mtd: rawnand: rockchip-nand-controller: copy hwecc PA data to oob_poi buffer Johan Jonker
2023-07-04 15:08   ` Miquel Raynal [this message]
2023-07-05 18:20     ` Johan Jonker
2023-06-15 17:34 ` [PATCH v3 3/3] mtd: rawnand: rockchip-nand-controller: add skipbbt option Johan Jonker
2023-07-04 15:13   ` Miquel Raynal
2023-07-07 15:27     ` Johan Jonker
2023-07-12 13:57       ` Miquel Raynal
2023-07-13 15:17         ` Richard Weinberger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230704170858.2a64c181@xps-13 \
    --to=miquel.raynal@bootlin.com \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    --cc=yifeng.zhao@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).