* linux-next: build warnings after merge of the clk tree
@ 2017-06-20 23:34 Stephen Rothwell
2017-06-21 15:15 ` Anup Patel
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Rothwell @ 2017-06-20 23:34 UTC (permalink / raw)
To: Mike Turquette, Stephen Boyd
Cc: Linux-Next Mailing List, Linux Kernel Mailing List,
Sandeep Tripathy, Anup Patel, Ray Jui, Scott Branden
Hi all,
After merging the clk tree, today's linux-next build (x86_64 allmodconfig)
produced these warnings:
WARNING: drivers/clk/bcm/built-in.o(.text+0x4022): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll3_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll3_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x4069): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll_pcie_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll_pcie_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x40b9): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll1_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll1_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x4109): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x4159): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll5_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll5_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x41a9): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll4_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll4_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/bcm/built-in.o(.text+0x41f9): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14bf2): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll3_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll3_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14c39): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll_pcie_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll_pcie_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14c89): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll1_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll1_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14cd9): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14d29): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll5_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll5_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14d79): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll4_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll4_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/clk/built-in.o(.text+0x14dc9): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e3a2): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll3_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll3_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e3e9): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll_pcie_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll_pcie_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e439): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll1_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll1_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e489): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e4d9): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll5_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll5_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e529): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll4_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll4_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: drivers/built-in.o(.text+0x13e579): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x819132): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll3_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll3_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x819179): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll_pcie_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll_pcie_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x8191c9): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll1_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll1_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x819219): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_lcpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_lcpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x819269): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll5_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll5_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x8192b9): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll4_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll4_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
WARNING: vmlinux.o(.text+0x819309): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
The function sr_genpll0_clk_init() references
the function __init iproc_pll_clk_setup().
This is often because sr_genpll0_clk_init lacks a __init
annotation or the annotation of iproc_pll_clk_setup is wrong.
Introduced by commit
654cdd3229cd ("clk: bcm: Add clocks for Stingray SOC")
--
Cheers,
Stephen Rothwell
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: linux-next: build warnings after merge of the clk tree
2017-06-20 23:34 linux-next: build warnings after merge of the clk tree Stephen Rothwell
@ 2017-06-21 15:15 ` Anup Patel
2017-06-21 16:13 ` Stephen Boyd
0 siblings, 1 reply; 5+ messages in thread
From: Anup Patel @ 2017-06-21 15:15 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Mike Turquette, Stephen Boyd, Linux-Next Mailing List,
Linux Kernel Mailing List, Sandeep Tripathy, Ray Jui,
Scott Branden
On Wed, Jun 21, 2017 at 5:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi all,
>
> After merging the clk tree, today's linux-next build (x86_64 allmodconfig)
> produced these warnings:
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x4022): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll3_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll3_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x4069): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll_pcie_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll_pcie_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x40b9): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll1_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll1_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x4109): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x4159): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll5_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll5_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x41a9): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll4_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll4_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/bcm/built-in.o(.text+0x41f9): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14bf2): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll3_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll3_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14c39): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll_pcie_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll_pcie_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14c89): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll1_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll1_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14cd9): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14d29): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll5_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll5_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14d79): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll4_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll4_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/clk/built-in.o(.text+0x14dc9): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e3a2): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll3_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll3_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e3e9): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll_pcie_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll_pcie_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e439): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll1_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll1_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e489): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e4d9): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll5_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll5_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e529): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll4_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll4_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: drivers/built-in.o(.text+0x13e579): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x819132): Section mismatch in reference from the function sr_genpll3_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll3_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll3_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x819179): Section mismatch in reference from the function sr_lcpll_pcie_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll_pcie_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll_pcie_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x8191c9): Section mismatch in reference from the function sr_lcpll1_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll1_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll1_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x819219): Section mismatch in reference from the function sr_lcpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_lcpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_lcpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x819269): Section mismatch in reference from the function sr_genpll5_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll5_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll5_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x8192b9): Section mismatch in reference from the function sr_genpll4_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll4_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll4_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> WARNING: vmlinux.o(.text+0x819309): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> The function sr_genpll0_clk_init() references
> the function __init iproc_pll_clk_setup().
> This is often because sr_genpll0_clk_init lacks a __init
> annotation or the annotation of iproc_pll_clk_setup is wrong.
>
> Introduced by commit
>
> 654cdd3229cd ("clk: bcm: Add clocks for Stingray SOC")
All sr_xxx_init() had __init attribute but we had removed it based on
review comments.
The iproc_pll_xxx() APIs are shared across various clk drivers of iproc SoCs.
I suggest we bring back __init attribute for all sr_xxx_init() in sr_clk.c ??
Regards,
Anup
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: linux-next: build warnings after merge of the clk tree
2017-06-21 15:15 ` Anup Patel
@ 2017-06-21 16:13 ` Stephen Boyd
0 siblings, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2017-06-21 16:13 UTC (permalink / raw)
To: Anup Patel
Cc: Stephen Rothwell, Mike Turquette, Linux-Next Mailing List,
Linux Kernel Mailing List, Sandeep Tripathy, Ray Jui,
Scott Branden
On 06/21, Anup Patel wrote:
> On Wed, Jun 21, 2017 at 5:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > Hi all,
> >
> > After merging the clk tree, today's linux-next build (x86_64 allmodconfig)
> > produced these warnings:
> >
> > WARNING: vmlinux.o(.text+0x819309): Section mismatch in reference from the function sr_genpll0_clk_init() to the function .init.text:iproc_pll_clk_setup()
> > The function sr_genpll0_clk_init() references
> > the function __init iproc_pll_clk_setup().
> > This is often because sr_genpll0_clk_init lacks a __init
> > annotation or the annotation of iproc_pll_clk_setup is wrong.
> >
> > Introduced by commit
> >
> > 654cdd3229cd ("clk: bcm: Add clocks for Stingray SOC")
Thanks for the report!
>
> All sr_xxx_init() had __init attribute but we had removed it based on
> review comments.
>
> The iproc_pll_xxx() APIs are shared across various clk drivers of iproc SoCs.
>
> I suggest we bring back __init attribute for all sr_xxx_init() in sr_clk.c ??
>
No. We should remove __init from the iproc_pll_clk_setup()
function.
---8<---
From: Stephen Boyd <sboyd@codeaurora.org>
Subject: [PATCH] clk: iproc: Remove __init marking on iproc_pll_clk_setup()
Now that this function is called from driver probe routines, it
needs to drop the __init marking because it isn't just called
from init code.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Cc: Anup Patel <anup.patel@broadcom.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Scott Branden <scott.branden@broadcom.com>
Fixes: 654cdd3229cd ("clk: bcm: Add clocks for Stingray SOC")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/bcm/clk-iproc-pll.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
index 2d61893da024..375d8dd80d45 100644
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -617,12 +617,12 @@ static void iproc_pll_sw_cfg(struct iproc_pll *pll)
}
}
-void __init iproc_pll_clk_setup(struct device_node *node,
- const struct iproc_pll_ctrl *pll_ctrl,
- const struct iproc_pll_vco_param *vco,
- unsigned int num_vco_entries,
- const struct iproc_clk_ctrl *clk_ctrl,
- unsigned int num_clks)
+void iproc_pll_clk_setup(struct device_node *node,
+ const struct iproc_pll_ctrl *pll_ctrl,
+ const struct iproc_pll_vco_param *vco,
+ unsigned int num_vco_entries,
+ const struct iproc_clk_ctrl *clk_ctrl,
+ unsigned int num_clks)
{
int i, ret;
struct iproc_pll *pll;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 5+ messages in thread
* linux-next: build warnings after merge of the clk tree
@ 2020-02-02 22:16 Stephen Rothwell
2020-02-03 5:25 ` Stephen Boyd
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Rothwell @ 2020-02-02 22:16 UTC (permalink / raw)
To: Mike Turquette, Stephen Boyd
Cc: Linux Next Mailing List, Linux Kernel Mailing List, Wen He
[-- Attachment #1: Type: text/plain, Size: 22223 bytes --]
Hi all,
After merging the clk tree, today's linux-next build (x86_64 allmodconfig)
produced these warnings:
In file included from include/linux/list.h:9,
from include/linux/kobject.h:19,
from include/linux/of.h:17,
from include/linux/clk-provider.h:9,
from drivers/clk/clk-plldig.c:8:
drivers/clk/clk-plldig.c: In function 'plldig_determine_rate':
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:843:48: note: in definition of macro '__is_constexpr'
843 | (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
| ^
include/linux/kernel.h:849:25: note: in expansion of macro '__no_side_effects'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:851:27: note: in definition of macro '__cmp'
851 | #define __cmp(x, y, op) ((x) op (y) ? (x) : (y))
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:851:40: note: in definition of macro '__cmp'
851 | #define __cmp(x, y, op) ((x) op (y) ? (x) : (y))
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:854:10: note: in definition of macro '__cmp_once'
854 | typeof(x) unique_x = (x); \
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:854:25: note: in definition of macro '__cmp_once'
854 | typeof(x) unique_x = (x); \
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:145:14: note: in expansion of macro 'clamp'
145 | req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
drivers/clk/clk-plldig.c: In function 'plldig_set_rate':
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:843:48: note: in definition of macro '__is_constexpr'
843 | (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8)))
| ^
include/linux/kernel.h:849:25: note: in expansion of macro '__no_side_effects'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:851:27: note: in definition of macro '__cmp'
851 | #define __cmp(x, y, op) ((x) op (y) ? (x) : (y))
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:851:40: note: in definition of macro '__cmp'
851 | #define __cmp(x, y, op) ((x) op (y) ? (x) : (y))
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:854:10: note: in definition of macro '__cmp_once'
854 | typeof(x) unique_x = (x); \
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
include/linux/kernel.h:835:29: warning: comparison of distinct pointer types lacks a cast
835 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
include/linux/kernel.h:854:25: note: in definition of macro '__cmp_once'
854 | typeof(x) unique_x = (x); \
| ^
include/linux/kernel.h:868:19: note: in expansion of macro '__careful_cmp'
868 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:28: note: in expansion of macro 'min'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
include/linux/kernel.h:849:4: note: in expansion of macro '__typecheck'
849 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
include/linux/kernel.h:859:24: note: in expansion of macro '__safe_cmp'
859 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
include/linux/kernel.h:875:19: note: in expansion of macro '__careful_cmp'
875 | #define max(x, y) __careful_cmp(x, y, >)
| ^~~~~~~~~~~~~
include/linux/kernel.h:912:45: note: in expansion of macro 'max'
912 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~
drivers/clk/clk-plldig.c:159:9: note: in expansion of macro 'clamp'
159 | rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
| ^~~~~
Introduced by commit
d37010a3c162 ("clk: ls1028a: Add clock driver for Display output interface")
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-02-03 5:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-20 23:34 linux-next: build warnings after merge of the clk tree Stephen Rothwell
2017-06-21 15:15 ` Anup Patel
2017-06-21 16:13 ` Stephen Boyd
2020-02-02 22:16 Stephen Rothwell
2020-02-03 5:25 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).