* [PATCH v9] board-omap3-beagle: add DSS2 support
@ 2010-04-22 8:23 Koen Kooi
2010-04-27 7:58 ` Koen Kooi
2010-05-03 14:15 ` Tomi Valkeinen
0 siblings, 2 replies; 7+ messages in thread
From: Koen Kooi @ 2010-04-22 8:23 UTC (permalink / raw)
To: tomi.valkeinen, tony; +Cc: linux-omap, Koen Kooi
This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
Changes since v1:
* removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
Changes since v2:
* changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
Changes since v3:
* really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
* moved comments to this section
Changes since v4:
* remove trailing whitespace
Changes since v5:
* fix semicolon typo
Changes since v6:
* use gpio_is_valid(dssdev->reset_gpio)
Changes since v8:
* fix missing whitespace before __init omap3_beagle_map_io(){}
arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
1 files changed, 75 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 962d377..69b154c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -39,6 +39,7 @@
#include <plat/board.h>
#include <plat/common.h>
+#include <plat/display.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = {
.resource = &omap3beagle_nand_resource,
};
+/* DSS */
+
+static int beagle_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 1);
+
+ return 0;
+}
+
+static void beagle_disable_dvi(struct omap_dss_device *dssdev)
+{
+ if (gpio_is_valid(dssdev->reset_gpio))
+ gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device beagle_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .reset_gpio = 170,
+ .platform_enable = beagle_enable_dvi,
+ .platform_disable = beagle_disable_dvi,
+};
+
+static struct omap_dss_device beagle_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *beagle_dss_devices[] = {
+ &beagle_dvi_device,
+ &beagle_tv_device,
+};
+
+static struct omap_dss_board_info beagle_dss_data = {
+ .num_devices = ARRAY_SIZE(beagle_dss_devices),
+ .devices = beagle_dss_devices,
+ .default_device = &beagle_dvi_device,
+};
+
+static struct platform_device beagle_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &beagle_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply beagle_vdac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply beagle_vdvi_supply =
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+
+static void __init beagle_display_init(void)
+{
+ int r;
+
+ r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
+ if (r < 0) {
+ printk(KERN_ERR "Unable to get DVI reset GPIO\n");
+ return;
+ }
+
+ gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
+}
+
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap2_hsmmc_info mmc[] = {
@@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct regulator_consumer_supply beagle_vmmc1_supply = {
.supply = "vmmc",
};
@@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
.setup = beagle_twl_gpio_setup,
};
-static struct regulator_consumer_supply beagle_vdac_supply = {
- .supply = "vdac",
- .dev = &omap3_beagle_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supply = {
- .supply = "vdvi",
- .dev = &omap3_beagle_lcd_device.dev,
-};
-
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data beagle_vmmc1 = {
.constraints = {
@@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
},
};
-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
-};
-
static void __init omap3_beagle_init_irq(void)
{
- omap_board_config = omap3_beagle_config;
- omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
@@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
- &omap3_beagle_lcd_device,
&leds_gpio,
&keys_gpio,
+ &beagle_dss_device,
};
static void __init omap3beagle_flash_init(void)
@@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void)
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+ beagle_display_init();
}
static void __init omap3_beagle_map_io(void)
--
1.6.6.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-04-22 8:23 [PATCH v9] board-omap3-beagle: add DSS2 support Koen Kooi
@ 2010-04-27 7:58 ` Koen Kooi
2010-04-27 13:27 ` Thomas Weber
2010-05-02 15:58 ` Felipe Contreras
2010-05-03 14:15 ` Tomi Valkeinen
1 sibling, 2 replies; 7+ messages in thread
From: Koen Kooi @ 2010-04-27 7:58 UTC (permalink / raw)
To: linux-omap@vger.kernel.org List
No more comments? Can it go in?
Op 22 apr 2010, om 10:23 heeft Koen Kooi het volgende geschreven:
> This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> Changes since v1:
> * removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
> Changes since v2:
> * changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
> Changes since v3:
> * really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
> * moved comments to this section
> Changes since v4:
> * remove trailing whitespace
> Changes since v5:
> * fix semicolon typo
> Changes since v6:
> * use gpio_is_valid(dssdev->reset_gpio)
> Changes since v8:
> * fix missing whitespace before __init omap3_beagle_map_io(){}
>
> arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
> 1 files changed, 75 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 962d377..69b154c 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -39,6 +39,7 @@
>
> #include <plat/board.h>
> #include <plat/common.h>
> +#include <plat/display.h>
> #include <plat/gpmc.h>
> #include <plat/nand.h>
> #include <plat/usb.h>
> @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = {
> .resource = &omap3beagle_nand_resource,
> };
>
> +/* DSS */
> +
> +static int beagle_enable_dvi(struct omap_dss_device *dssdev)
> +{
> + if (gpio_is_valid(dssdev->reset_gpio))
> + gpio_set_value(dssdev->reset_gpio, 1);
> +
> + return 0;
> +}
> +
> +static void beagle_disable_dvi(struct omap_dss_device *dssdev)
> +{
> + if (gpio_is_valid(dssdev->reset_gpio))
> + gpio_set_value(dssdev->reset_gpio, 0);
> +}
> +
> +static struct omap_dss_device beagle_dvi_device = {
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .name = "dvi",
> + .driver_name = "generic_panel",
> + .phy.dpi.data_lines = 24,
> + .reset_gpio = 170,
> + .platform_enable = beagle_enable_dvi,
> + .platform_disable = beagle_disable_dvi,
> +};
> +
> +static struct omap_dss_device beagle_tv_device = {
> + .name = "tv",
> + .driver_name = "venc",
> + .type = OMAP_DISPLAY_TYPE_VENC,
> + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
> +};
> +
> +static struct omap_dss_device *beagle_dss_devices[] = {
> + &beagle_dvi_device,
> + &beagle_tv_device,
> +};
> +
> +static struct omap_dss_board_info beagle_dss_data = {
> + .num_devices = ARRAY_SIZE(beagle_dss_devices),
> + .devices = beagle_dss_devices,
> + .default_device = &beagle_dvi_device,
> +};
> +
> +static struct platform_device beagle_dss_device = {
> + .name = "omapdss",
> + .id = -1,
> + .dev = {
> + .platform_data = &beagle_dss_data,
> + },
> +};
> +
> +static struct regulator_consumer_supply beagle_vdac_supply =
> + REGULATOR_SUPPLY("vdda_dac", "omapdss");
> +
> +static struct regulator_consumer_supply beagle_vdvi_supply =
> + REGULATOR_SUPPLY("vdds_dsi", "omapdss");
> +
> +static void __init beagle_display_init(void)
> +{
> + int r;
> +
> + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
> + if (r < 0) {
> + printk(KERN_ERR "Unable to get DVI reset GPIO\n");
> + return;
> + }
> +
> + gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
> +}
> +
> #include "sdram-micron-mt46h32m32lf-6.h"
>
> static struct omap2_hsmmc_info mmc[] = {
> @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
> {} /* Terminator */
> };
>
> -static struct platform_device omap3_beagle_lcd_device = {
> - .name = "omap3beagle_lcd",
> - .id = -1,
> -};
> -
> -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
> - .ctrl_name = "internal",
> -};
> -
> static struct regulator_consumer_supply beagle_vmmc1_supply = {
> .supply = "vmmc",
> };
> @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
> .setup = beagle_twl_gpio_setup,
> };
>
> -static struct regulator_consumer_supply beagle_vdac_supply = {
> - .supply = "vdac",
> - .dev = &omap3_beagle_lcd_device.dev,
> -};
> -
> -static struct regulator_consumer_supply beagle_vdvi_supply = {
> - .supply = "vdvi",
> - .dev = &omap3_beagle_lcd_device.dev,
> -};
> -
> /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
> static struct regulator_init_data beagle_vmmc1 = {
> .constraints = {
> @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
> },
> };
>
> -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
> - { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
> -};
> -
> static void __init omap3_beagle_init_irq(void)
> {
> - omap_board_config = omap3_beagle_config;
> - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
> omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
> mt46h32m32lf6_sdrc_params);
> omap_init_irq();
> @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
> }
>
> static struct platform_device *omap3_beagle_devices[] __initdata = {
> - &omap3_beagle_lcd_device,
> &leds_gpio,
> &keys_gpio,
> + &beagle_dss_device,
> };
>
> static void __init omap3beagle_flash_init(void)
> @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void)
> /* Ensure SDRC pins are mux'd for self-refresh */
> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
> +
> + beagle_display_init();
> }
>
> static void __init omap3_beagle_map_io(void)
> --
> 1.6.6.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-04-27 7:58 ` Koen Kooi
@ 2010-04-27 13:27 ` Thomas Weber
2010-05-02 15:58 ` Felipe Contreras
1 sibling, 0 replies; 7+ messages in thread
From: Thomas Weber @ 2010-04-27 13:27 UTC (permalink / raw)
To: Koen Kooi; +Cc: linux-omap@vger.kernel.org List
On 04/27/10 07:58, Koen Kooi wrote:
> No more comments? Can it go in?
>
> Op 22 apr 2010, om 10:23 heeft Koen Kooi het volgende geschreven:
>
>> This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
>>
>> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
>> ---
>> Changes since v1:
>> * removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> Changes since v2:
>> * changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
>> Changes since v3:
>> * really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> * moved comments to this section
>> Changes since v4:
>> * remove trailing whitespace
>> Changes since v5:
>> * fix semicolon typo
>> Changes since v6:
>> * use gpio_is_valid(dssdev->reset_gpio)
>> Changes since v8:
>> * fix missing whitespace before __init omap3_beagle_map_io(){}
>>
>> arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
>> 1 files changed, 75 insertions(+), 26 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
>> index 962d377..69b154c 100644
>> --- a/arch/arm/mach-omap2/board-omap3beagle.c
>> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>> @@ -39,6 +39,7 @@
>>
>> #include <plat/board.h>
>> #include <plat/common.h>
>> +#include <plat/display.h>
>> #include <plat/gpmc.h>
>> #include <plat/nand.h>
>> #include <plat/usb.h>
>> @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = {
>> .resource = &omap3beagle_nand_resource,
>> };
>>
>> +/* DSS */
>> +
>> +static int beagle_enable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + if (gpio_is_valid(dssdev->reset_gpio))
>> + gpio_set_value(dssdev->reset_gpio, 1);
>> +
>> + return 0;
>> +}
>> +
>> +static void beagle_disable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + if (gpio_is_valid(dssdev->reset_gpio))
>> + gpio_set_value(dssdev->reset_gpio, 0);
>> +}
>> +
>> +static struct omap_dss_device beagle_dvi_device = {
>> + .type = OMAP_DISPLAY_TYPE_DPI,
>> + .name = "dvi",
>> + .driver_name = "generic_panel",
>> + .phy.dpi.data_lines = 24,
>> + .reset_gpio = 170,
>> + .platform_enable = beagle_enable_dvi,
>> + .platform_disable = beagle_disable_dvi,
>> +};
>> +
>> +static struct omap_dss_device beagle_tv_device = {
>> + .name = "tv",
>> + .driver_name = "venc",
>> + .type = OMAP_DISPLAY_TYPE_VENC,
>> + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
>> +};
>> +
>> +static struct omap_dss_device *beagle_dss_devices[] = {
>> + &beagle_dvi_device,
>> + &beagle_tv_device,
>> +};
>> +
>> +static struct omap_dss_board_info beagle_dss_data = {
>> + .num_devices = ARRAY_SIZE(beagle_dss_devices),
>> + .devices = beagle_dss_devices,
>> + .default_device = &beagle_dvi_device,
>> +};
>> +
>> +static struct platform_device beagle_dss_device = {
>> + .name = "omapdss",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &beagle_dss_data,
>> + },
>> +};
>> +
>> +static struct regulator_consumer_supply beagle_vdac_supply =
>> + REGULATOR_SUPPLY("vdda_dac", "omapdss");
>> +
>> +static struct regulator_consumer_supply beagle_vdvi_supply =
>> + REGULATOR_SUPPLY("vdds_dsi", "omapdss");
>> +
>> +static void __init beagle_display_init(void)
>> +{
>> + int r;
>> +
>> + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
>> + if (r < 0) {
>> + printk(KERN_ERR "Unable to get DVI reset GPIO\n");
>> + return;
>> + }
>> +
>> + gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
>> +}
>> +
>> #include "sdram-micron-mt46h32m32lf-6.h"
>>
>> static struct omap2_hsmmc_info mmc[] = {
>> @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
>> {} /* Terminator */
>> };
>>
>> -static struct platform_device omap3_beagle_lcd_device = {
>> - .name = "omap3beagle_lcd",
>> - .id = -1,
>> -};
>> -
>> -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
>> - .ctrl_name = "internal",
>> -};
>> -
>> static struct regulator_consumer_supply beagle_vmmc1_supply = {
>> .supply = "vmmc",
>> };
>> @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
>> .setup = beagle_twl_gpio_setup,
>> };
>>
>> -static struct regulator_consumer_supply beagle_vdac_supply = {
>> - .supply = "vdac",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> -static struct regulator_consumer_supply beagle_vdvi_supply = {
>> - .supply = "vdvi",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
>> static struct regulator_init_data beagle_vmmc1 = {
>> .constraints = {
>> @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
>> },
>> };
>>
>> -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
>> - { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
>> -};
>> -
>> static void __init omap3_beagle_init_irq(void)
>> {
>> - omap_board_config = omap3_beagle_config;
>> - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
>> omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
>> mt46h32m32lf6_sdrc_params);
>> omap_init_irq();
>> @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
>> }
>>
>> static struct platform_device *omap3_beagle_devices[] __initdata = {
>> - &omap3_beagle_lcd_device,
>> &leds_gpio,
>> &keys_gpio,
>> + &beagle_dss_device,
>> };
>>
>> static void __init omap3beagle_flash_init(void)
>> @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void)
>> /* Ensure SDRC pins are mux'd for self-refresh */
>> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
>> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
>> +
>> + beagle_display_init();
>> }
>>
>> static void __init omap3_beagle_map_io(void)
>> --
>> 1.6.6.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I have tested it on beagle board Rev. C4
Tested-by: Thomas Weber <weber@corscience.de>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-04-27 7:58 ` Koen Kooi
2010-04-27 13:27 ` Thomas Weber
@ 2010-05-02 15:58 ` Felipe Contreras
2010-05-06 9:53 ` Koen Kooi
1 sibling, 1 reply; 7+ messages in thread
From: Felipe Contreras @ 2010-05-02 15:58 UTC (permalink / raw)
To: Koen Kooi; +Cc: linux-omap@vger.kernel.org List, Tomi Valkeinen, Tony Lindgren
On Tue, Apr 27, 2010 at 10:58 AM, Koen Kooi <koen@dominion.thruhere.net> wrote:
> No more comments? Can it go in?
>
> Op 22 apr 2010, om 10:23 heeft Koen Kooi het volgende geschreven:
>
>> This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
>>
>> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
>> ---
>> Changes since v1:
>> * removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> Changes since v2:
>> * changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
>> Changes since v3:
>> * really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> * moved comments to this section
>> Changes since v4:
>> * remove trailing whitespace
>> Changes since v5:
>> * fix semicolon typo
>> Changes since v6:
>> * use gpio_is_valid(dssdev->reset_gpio)
>> Changes since v8:
>> * fix missing whitespace before __init omap3_beagle_map_io(){}
>>
>> arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
>> 1 files changed, 75 insertions(+), 26 deletions(-)
I also have these changes in one of my trees backported from Tomi
Valkeinen's tree. I'm attaching the diff; some of these are cosmetic,
but I think the gpio changes make sense, although I don't know if
omap_mux_init_gpio is really needed.
I think the current proposed patch should go in already, I don't know
what we are waiting for.
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -39,11 +39,11 @@
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/display.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include <plat/display.h>
#include "mux.h"
#include "mmc-twl4030.h"
@@ -169,6 +169,10 @@ static void __init beagle_display_init(void)
{
int r;
+#if 0
+ /* is this really needed? */
+ omap_mux_init_gpio(beagle_dvi_device.reset_gpio, OMAP_PIN_INPUT);
+#endif
r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
if (r < 0) {
printk(KERN_ERR "Unable to get DVI reset GPIO\n");
@@ -279,6 +283,7 @@ static struct regulator_init_data beagle_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
+ .apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
@@ -414,9 +419,9 @@ static void __init omap3_beagle_init_irq(void)
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
+ &beagle_dss_device,
&leds_gpio,
&keys_gpio,
- &beagle_dss_device,
};
static void __init omap3beagle_flash_init(void)
@@ -485,20 +490,14 @@ static void __init omap3_beagle_init(void)
ARRAY_SIZE(omap3_beagle_devices));
omap_serial_init();
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- gpio_request(170, "DVI_nPD");
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
-
usb_musb_init();
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
+ beagle_display_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_display_init();
}
static void __init omap3_beagle_map_io(void)
--
Felipe Contreras
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-05-02 15:58 ` Felipe Contreras
@ 2010-05-06 9:53 ` Koen Kooi
0 siblings, 0 replies; 7+ messages in thread
From: Koen Kooi @ 2010-05-06 9:53 UTC (permalink / raw)
To: Felipe Contreras
Cc: linux-omap@vger.kernel.org List, Tomi Valkeinen, Tony Lindgren
Op 2 mei 2010, om 17:58 heeft Felipe Contreras het volgende geschreven:
>
> I also have these changes in one of my trees backported from Tomi
> Valkeinen's tree. I'm attaching the diff; some of these are cosmetic,
> but I think the gpio changes make sense, although I don't know if
> omap_mux_init_gpio is really needed.
>
> I think the current proposed patch should go in already, I don't know
> what we are waiting for.
>
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>
> +#if 0
> + /* is this really needed? */
> + omap_mux_init_gpio(beagle_dvi_device.reset_gpio, OMAP_PIN_INPUT);
> +#endif
> r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
>
> - omap_mux_init_gpio(170, OMAP_PIN_INPUT);
> - gpio_request(170, "DVI_nPD");
> - /* REVISIT leave DVI powered down until it's needed ... */
> - gpio_direction_output(170, true);
> -
I have a similar change queued since the new beagle xM moves DVI reset to gpio129, but I'm holding off on sending beagle patches here till the hardware design is finalized.
regards,
Koen
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-04-22 8:23 [PATCH v9] board-omap3-beagle: add DSS2 support Koen Kooi
2010-04-27 7:58 ` Koen Kooi
@ 2010-05-03 14:15 ` Tomi Valkeinen
2010-05-05 6:46 ` Koen Kooi
1 sibling, 1 reply; 7+ messages in thread
From: Tomi Valkeinen @ 2010-05-03 14:15 UTC (permalink / raw)
To: ext Koen Kooi; +Cc: tony, linux-omap, Koen Kooi
On Thu, 2010-04-22 at 10:23 +0200, ext Koen Kooi wrote:
> This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
> ---
> Changes since v1:
> * removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
> Changes since v2:
> * changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
> Changes since v3:
> * really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
> * moved comments to this section
> Changes since v4:
> * remove trailing whitespace
> Changes since v5:
> * fix semicolon typo
> Changes since v6:
> * use gpio_is_valid(dssdev->reset_gpio)
> Changes since v8:
> * fix missing whitespace before __init omap3_beagle_map_io(){}
>
> arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
> 1 files changed, 75 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 962d377..69b154c 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -39,6 +39,7 @@
>
> #include <plat/board.h>
> #include <plat/common.h>
> +#include <plat/display.h>
> #include <plat/gpmc.h>
> #include <plat/nand.h>
> #include <plat/usb.h>
> @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = {
> .resource = &omap3beagle_nand_resource,
> };
>
> +/* DSS */
> +
> +static int beagle_enable_dvi(struct omap_dss_device *dssdev)
> +{
> + if (gpio_is_valid(dssdev->reset_gpio))
> + gpio_set_value(dssdev->reset_gpio, 1);
> +
> + return 0;
> +}
> +
> +static void beagle_disable_dvi(struct omap_dss_device *dssdev)
> +{
> + if (gpio_is_valid(dssdev->reset_gpio))
> + gpio_set_value(dssdev->reset_gpio, 0);
> +}
> +
> +static struct omap_dss_device beagle_dvi_device = {
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .name = "dvi",
> + .driver_name = "generic_panel",
> + .phy.dpi.data_lines = 24,
> + .reset_gpio = 170,
> + .platform_enable = beagle_enable_dvi,
> + .platform_disable = beagle_disable_dvi,
> +};
> +
> +static struct omap_dss_device beagle_tv_device = {
> + .name = "tv",
> + .driver_name = "venc",
> + .type = OMAP_DISPLAY_TYPE_VENC,
> + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
> +};
> +
> +static struct omap_dss_device *beagle_dss_devices[] = {
> + &beagle_dvi_device,
> + &beagle_tv_device,
> +};
> +
> +static struct omap_dss_board_info beagle_dss_data = {
> + .num_devices = ARRAY_SIZE(beagle_dss_devices),
> + .devices = beagle_dss_devices,
> + .default_device = &beagle_dvi_device,
> +};
> +
> +static struct platform_device beagle_dss_device = {
> + .name = "omapdss",
> + .id = -1,
> + .dev = {
> + .platform_data = &beagle_dss_data,
> + },
> +};
> +
> +static struct regulator_consumer_supply beagle_vdac_supply =
> + REGULATOR_SUPPLY("vdda_dac", "omapdss");
> +
> +static struct regulator_consumer_supply beagle_vdvi_supply =
> + REGULATOR_SUPPLY("vdds_dsi", "omapdss");
> +
> +static void __init beagle_display_init(void)
> +{
> + int r;
> +
> + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
> + if (r < 0) {
> + printk(KERN_ERR "Unable to get DVI reset GPIO\n");
> + return;
> + }
> +
> + gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
> +}
> +
> #include "sdram-micron-mt46h32m32lf-6.h"
>
> static struct omap2_hsmmc_info mmc[] = {
> @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
> {} /* Terminator */
> };
>
> -static struct platform_device omap3_beagle_lcd_device = {
> - .name = "omap3beagle_lcd",
> - .id = -1,
> -};
> -
> -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
> - .ctrl_name = "internal",
> -};
> -
> static struct regulator_consumer_supply beagle_vmmc1_supply = {
> .supply = "vmmc",
> };
> @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
> .setup = beagle_twl_gpio_setup,
> };
>
> -static struct regulator_consumer_supply beagle_vdac_supply = {
> - .supply = "vdac",
> - .dev = &omap3_beagle_lcd_device.dev,
> -};
> -
> -static struct regulator_consumer_supply beagle_vdvi_supply = {
> - .supply = "vdvi",
> - .dev = &omap3_beagle_lcd_device.dev,
> -};
> -
> /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
> static struct regulator_init_data beagle_vmmc1 = {
> .constraints = {
> @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
> },
> };
>
> -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
> - { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
> -};
> -
> static void __init omap3_beagle_init_irq(void)
> {
> - omap_board_config = omap3_beagle_config;
> - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
> omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
> mt46h32m32lf6_sdrc_params);
> omap_init_irq();
> @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
> }
>
> static struct platform_device *omap3_beagle_devices[] __initdata = {
> - &omap3_beagle_lcd_device,
> &leds_gpio,
> &keys_gpio,
> + &beagle_dss_device,
> };
>
> static void __init omap3beagle_flash_init(void)
> @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void)
> /* Ensure SDRC pins are mux'd for self-refresh */
> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
> +
> + beagle_display_init();
> }
>
> static void __init omap3_beagle_map_io(void)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v9] board-omap3-beagle: add DSS2 support
2010-05-03 14:15 ` Tomi Valkeinen
@ 2010-05-05 6:46 ` Koen Kooi
0 siblings, 0 replies; 7+ messages in thread
From: Koen Kooi @ 2010-05-05 6:46 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: Tony Lindgren, linux-omap@vger.kernel.org List
Tony,
Would it be possible to get this applied in the next merge window?
regards,
Koen
Op 3 mei 2010, om 16:15 heeft Tomi Valkeinen het volgende geschreven:
> On Thu, 2010-04-22 at 10:23 +0200, ext Koen Kooi wrote:
>> This patch adds DSS2 support to the beagleboard boardfile. DVI and TV-out are supported.
>>
>> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
>
> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
>
>
>> ---
>> Changes since v1:
>> * removed beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> Changes since v2:
>> * changed to REGULATOR_SUPPLY(_name, _dev_name) for dss regulators
>> Changes since v3:
>> * really remove beagle_panel_enable_tv() and beagle_panel_disable_tv()
>> * moved comments to this section
>> Changes since v4:
>> * remove trailing whitespace
>> Changes since v5:
>> * fix semicolon typo
>> Changes since v6:
>> * use gpio_is_valid(dssdev->reset_gpio)
>> Changes since v8:
>> * fix missing whitespace before __init omap3_beagle_map_io(){}
>>
>> arch/arm/mach-omap2/board-omap3beagle.c | 101 +++++++++++++++++++++++--------
>> 1 files changed, 75 insertions(+), 26 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
>> index 962d377..69b154c 100644
>> --- a/arch/arm/mach-omap2/board-omap3beagle.c
>> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>> @@ -39,6 +39,7 @@
>>
>> #include <plat/board.h>
>> #include <plat/common.h>
>> +#include <plat/display.h>
>> #include <plat/gpmc.h>
>> #include <plat/nand.h>
>> #include <plat/usb.h>
>> @@ -106,6 +107,77 @@ static struct platform_device omap3beagle_nand_device = {
>> .resource = &omap3beagle_nand_resource,
>> };
>>
>> +/* DSS */
>> +
>> +static int beagle_enable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + if (gpio_is_valid(dssdev->reset_gpio))
>> + gpio_set_value(dssdev->reset_gpio, 1);
>> +
>> + return 0;
>> +}
>> +
>> +static void beagle_disable_dvi(struct omap_dss_device *dssdev)
>> +{
>> + if (gpio_is_valid(dssdev->reset_gpio))
>> + gpio_set_value(dssdev->reset_gpio, 0);
>> +}
>> +
>> +static struct omap_dss_device beagle_dvi_device = {
>> + .type = OMAP_DISPLAY_TYPE_DPI,
>> + .name = "dvi",
>> + .driver_name = "generic_panel",
>> + .phy.dpi.data_lines = 24,
>> + .reset_gpio = 170,
>> + .platform_enable = beagle_enable_dvi,
>> + .platform_disable = beagle_disable_dvi,
>> +};
>> +
>> +static struct omap_dss_device beagle_tv_device = {
>> + .name = "tv",
>> + .driver_name = "venc",
>> + .type = OMAP_DISPLAY_TYPE_VENC,
>> + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
>> +};
>> +
>> +static struct omap_dss_device *beagle_dss_devices[] = {
>> + &beagle_dvi_device,
>> + &beagle_tv_device,
>> +};
>> +
>> +static struct omap_dss_board_info beagle_dss_data = {
>> + .num_devices = ARRAY_SIZE(beagle_dss_devices),
>> + .devices = beagle_dss_devices,
>> + .default_device = &beagle_dvi_device,
>> +};
>> +
>> +static struct platform_device beagle_dss_device = {
>> + .name = "omapdss",
>> + .id = -1,
>> + .dev = {
>> + .platform_data = &beagle_dss_data,
>> + },
>> +};
>> +
>> +static struct regulator_consumer_supply beagle_vdac_supply =
>> + REGULATOR_SUPPLY("vdda_dac", "omapdss");
>> +
>> +static struct regulator_consumer_supply beagle_vdvi_supply =
>> + REGULATOR_SUPPLY("vdds_dsi", "omapdss");
>> +
>> +static void __init beagle_display_init(void)
>> +{
>> + int r;
>> +
>> + r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
>> + if (r < 0) {
>> + printk(KERN_ERR "Unable to get DVI reset GPIO\n");
>> + return;
>> + }
>> +
>> + gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
>> +}
>> +
>> #include "sdram-micron-mt46h32m32lf-6.h"
>>
>> static struct omap2_hsmmc_info mmc[] = {
>> @@ -117,15 +189,6 @@ static struct omap2_hsmmc_info mmc[] = {
>> {} /* Terminator */
>> };
>>
>> -static struct platform_device omap3_beagle_lcd_device = {
>> - .name = "omap3beagle_lcd",
>> - .id = -1,
>> -};
>> -
>> -static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
>> - .ctrl_name = "internal",
>> -};
>> -
>> static struct regulator_consumer_supply beagle_vmmc1_supply = {
>> .supply = "vmmc",
>> };
>> @@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
>> .setup = beagle_twl_gpio_setup,
>> };
>>
>> -static struct regulator_consumer_supply beagle_vdac_supply = {
>> - .supply = "vdac",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> -static struct regulator_consumer_supply beagle_vdvi_supply = {
>> - .supply = "vdvi",
>> - .dev = &omap3_beagle_lcd_device.dev,
>> -};
>> -
>> /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
>> static struct regulator_init_data beagle_vmmc1 = {
>> .constraints = {
>> @@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
>> },
>> };
>>
>> -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
>> - { OMAP_TAG_LCD, &omap3_beagle_lcd_config },
>> -};
>> -
>> static void __init omap3_beagle_init_irq(void)
>> {
>> - omap_board_config = omap3_beagle_config;
>> - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
>> omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
>> mt46h32m32lf6_sdrc_params);
>> omap_init_irq();
>> @@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
>> }
>>
>> static struct platform_device *omap3_beagle_devices[] __initdata = {
>> - &omap3_beagle_lcd_device,
>> &leds_gpio,
>> &keys_gpio,
>> + &beagle_dss_device,
>> };
>>
>> static void __init omap3beagle_flash_init(void)
>> @@ -456,6 +503,8 @@ static void __init omap3_beagle_init(void)
>> /* Ensure SDRC pins are mux'd for self-refresh */
>> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
>> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
>> +
>> + beagle_display_init();
>> }
>>
>> static void __init omap3_beagle_map_io(void)
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-05-06 9:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-22 8:23 [PATCH v9] board-omap3-beagle: add DSS2 support Koen Kooi
2010-04-27 7:58 ` Koen Kooi
2010-04-27 13:27 ` Thomas Weber
2010-05-02 15:58 ` Felipe Contreras
2010-05-06 9:53 ` Koen Kooi
2010-05-03 14:15 ` Tomi Valkeinen
2010-05-05 6:46 ` Koen Kooi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).