[PATCH v9 0/4] Introduce PRU platform consumer API

[PATCH v9 0/4] Introduce PRU platform consumer API

[MD Danish Anwar]

Hi All,
The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS
or simply PRUSS) on various TI SoCs consists of dual 32-bit RISC cores
(Programmable Real-Time Units, or PRUs) for program execution.

There are 3 foundation components for TI PRUSS subsystem: the PRUSS platform
driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All of them have
already been merged and can be found under:
1) drivers/soc/ti/pruss.c
   Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
2) drivers/irqchip/irq-pruss-intc.c
   Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
3) drivers/remoteproc/pru_rproc.c
   Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml

The programmable nature of the PRUs provide flexibility to implement custom
peripheral interfaces, fast real-time responses, or specialized data handling.
Example of a PRU consumer drivers will be:
  - Software UART over PRUSS
  - PRU-ICSS Ethernet EMAC

In order to make usage of common PRU resources and allow the consumer drivers
to configure the PRU hardware for specific usage the PRU API is introduced.

This is the v9 of the old patch series [11].

Changes from v8 [11] to v9:
*) Added Mathieu's Acked by in first two patches.
*) Removed variable initialization from pruss_cfg_get_gpmux() API.
*) Removed pru_id < 0 if condition from pruss_cfg_get_gpmux() / set ()
APIs.
*) Removed initialization from enum pruss_gp_mux_sel, pruss_gpi_mode and pru_type.
*) Removed pru_id < 0 and mode < 0 checks from pruss_cfg_gpimode() API.

Changes from v7 [10] to v8:
*) Addressed Mathieu's comments and moved pruss related API definitions to
linux/pruss_driver.h
*) Moved enum pruss_mem, pruss_gp_mux_sel, pruss_gpi_mode, pru_type and struct
pruss_mem_region from remoteproc/pruss.h to linux/pruss_driver.h as asked by
Mathieu.

Changes from v6 [9] to v7:
*) Addressed Simon's comment on patch 3 of this series and dropped unnecassary
macros from the patch.

Changes from v5 [1] to v6:
*) Added Reviewed by tags of Roger and Tony to the patches.
*) Added Acked by tag of Mathieu to patch 2 of this series.
*) Added NULL check for @mux in pruss_cfg_get_gpmux() API.
*) Added comment to the pruss_get() function documentation mentioning it is
expected the caller will have done a pru_rproc_get() on @rproc.
*) Fixed compilation warning "warning: ‘pruss_cfg_update’ defined but not used"
in patch 3 by squashing patch 3 [7] and patch 5 [8] of previous revision
together. Squashed patch 5 instead of patch 4 with patch 3 because patch 5 uses
both read() and update() APIs where as patch 4 only uses update() API.
Previously pruss_cfg_read()/update() APIs were intoroduced in patch 3
and used in patch 4 and 5. Now these APIs are introduced as well as used in
patch 3.

Changes from v4 [2] to v5:
*) Addressed Roger's comment to change function argument in API
pruss_cfg_xfr_enable(). Instead of asking user to calcualte mask, now user
will just provide the pru_type and mask will be calcualted inside the API.
*) Moved enum pru_type from pru_rproc.c to include/linux/remoteproc/pruss.h
in patch 4 / 5.
*) Moved enum pruss_gpi_mode from patch 3/5 to patch 4/5 to introduce this
enum in same patch as the API using it.
*) Moved enum pruss_gp_mux_sel from patch 3/5 to patch 5/5 to introduce this
enum in same patch as the API using it.
*) Created new headefile drivers/soc/ti/pruss.h, private to PRUSS as asked by
Roger. Moved all private definitions and pruss_cfg_read () / update ()
APIs to this newly added headerfile.
*) Renamed include/linux/pruss_driver.h to include/linux/pruss_internal.h as
suggested by Andrew and Roger.

Changes from v3 [3] to v4:
*) Added my SoB tags in all patches as earlier SoB tags were missing in few
patches.
*) Added Roger's RB tags in 3 patches.
*) Addressed Roger's comment in patch 4/5 of this series. Added check for
   invalid GPI mode in pruss_cfg_gpimode() API.
*) Removed patch [4] from this series as that patch is no longer required.
*) Made pruss_cfg_read() and pruss_cfg_update() APIs internal to pruss.c by
   removing EXPORT_SYMBOL_GPL and making them static. Now these APIs are
   internal to pruss.c and PRUSS CFG space is not exposed.
*) Moved APIs pruss_cfg_gpimode(), pruss_cfg_miirt_enable(),
   pruss_cfg_xfr_enable(), pruss_cfg_get_gpmux(), pruss_cfg_set_gpmux() to
   pruss.c file as they are using APIs pruss_cfg_read / update.
   Defined these APIs in pruss.h file as other drivers use these APIs to
   perform respective operations.

Changes from v2 to v3:
*) No functional changes, the old series has been rebased on linux-next (tag:
next-20230306).

This series depends on another series which is already merged in the remoteproc
tree [5] and is part of v6.3-rc1. This series and the remoteproc series form
the PRUSS consumer API which can be used by consumer drivers to utilize the
PRUs.

One example of the consumer driver is the PRU-ICSSG ethernet driver [6],which
depends on this series and the remoteproc series [5].

[1] https://lore.kernel.org/all/20230323062451.2925996-1-danishanwar@ti.com/
[2] https://lore.kernel.org/all/20230313111127.1229187-1-danishanwar@ti.com/
[3] https://lore.kernel.org/all/20230306110934.2736465-1-danishanwar@ti.com/
[4] https://lore.kernel.org/all/20230306110934.2736465-6-danishanwar@ti.com/
[5] https://lore.kernel.org/all/20230106121046.886863-1-danishanwar@ti.com/#t
[6] https://lore.kernel.org/all/20230210114957.2667963-1-danishanwar@ti.com/
[7] https://lore.kernel.org/all/20230323062451.2925996-4-danishanwar@ti.com/
[8] https://lore.kernel.org/all/20230323062451.2925996-6-danishanwar@ti.com/
[9] https://lore.kernel.org/all/20230331112941.823410-1-danishanwar@ti.com/
[10] https://lore.kernel.org/all/20230404115336.599430-1-danishanwar@ti.com/
[11] https://lore.kernel.org/all/20230412103012.1754161-1-danishanwar@ti.com/

Thanks and Regards,
Md Danish Anwar

Andrew F. Davis (1):
  soc: ti: pruss: Add pruss_{request,release}_mem_region() API

Suman Anna (2):
  soc: ti: pruss: Add pruss_cfg_read()/update(),
    pruss_cfg_get_gpmux()/set_gpmux() APIs
  soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and
    XFR

Tero Kristo (1):
  soc: ti: pruss: Add pruss_get()/put() API

 drivers/remoteproc/pru_rproc.c |  15 --
 drivers/soc/ti/pruss.c         | 255 +++++++++++++++++++++++++++++++++
 drivers/soc/ti/pruss.h         |  88 ++++++++++++
 include/linux/pruss_driver.h   | 123 ++++++++++++++++
 4 files changed, 466 insertions(+), 15 deletions(-)
 create mode 100644 drivers/soc/ti/pruss.h

-- 
2.34.1

[PATCH v9 1/4] soc: ti: pruss: Add pruss_get()/put() API

[MD Danish Anwar]

From: Tero Kristo <t-kristo@ti.com>

Add two new get and put API, pruss_get() and pruss_put() to the
PRUSS platform driver to allow client drivers to request a handle
to a PRUSS device. This handle will be used by client drivers to
request various operations of the PRUSS platform driver through
additional API that will be added in the following patches.

The pruss_get() function returns the pruss handle corresponding
to a PRUSS device referenced by a PRU remoteproc instance. The
pruss_put() is the complimentary function to pruss_get().

Co-developed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/soc/ti/pruss.c       | 62 ++++++++++++++++++++++++++++++++++++
 include/linux/pruss_driver.h | 18 +++++++++++
 2 files changed, 80 insertions(+)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 6882c86b3ce5..3fac92df8790 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -6,6 +6,7 @@
  * Author(s):
  *	Suman Anna <s-anna@ti.com>
  *	Andrew F. Davis <afd@ti.com>
+ *	Tero Kristo <t-kristo@ti.com>
  */
 
 #include <linux/clk-provider.h>
@@ -18,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pruss_driver.h>
 #include <linux/regmap.h>
+#include <linux/remoteproc.h>
 #include <linux/slab.h>
 
 /**
@@ -30,6 +32,66 @@ struct pruss_private_data {
 	bool has_core_mux_clock;
 };
 
+/**
+ * pruss_get() - get the pruss for a given PRU remoteproc
+ * @rproc: remoteproc handle of a PRU instance
+ *
+ * Finds the parent pruss device for a PRU given the @rproc handle of the
+ * PRU remote processor. This function increments the pruss device's refcount,
+ * so always use pruss_put() to decrement it back once pruss isn't needed
+ * anymore.
+ *
+ * This API doesn't check if @rproc is valid or not. It is expected the caller
+ * will have done a pru_rproc_get() on @rproc, before calling this API to make
+ * sure that @rproc is valid.
+ *
+ * Return: pruss handle on success, and an ERR_PTR on failure using one
+ * of the following error values
+ *    -EINVAL if invalid parameter
+ *    -ENODEV if PRU device or PRUSS device is not found
+ */
+struct pruss *pruss_get(struct rproc *rproc)
+{
+	struct pruss *pruss;
+	struct device *dev;
+	struct platform_device *ppdev;
+
+	if (IS_ERR_OR_NULL(rproc))
+		return ERR_PTR(-EINVAL);
+
+	dev = &rproc->dev;
+
+	/* make sure it is PRU rproc */
+	if (!dev->parent || !is_pru_rproc(dev->parent))
+		return ERR_PTR(-ENODEV);
+
+	ppdev = to_platform_device(dev->parent->parent);
+	pruss = platform_get_drvdata(ppdev);
+	if (!pruss)
+		return ERR_PTR(-ENODEV);
+
+	get_device(pruss->dev);
+
+	return pruss;
+}
+EXPORT_SYMBOL_GPL(pruss_get);
+
+/**
+ * pruss_put() - decrement pruss device's usecount
+ * @pruss: pruss handle
+ *
+ * Complimentary function for pruss_get(). Needs to be called
+ * after the PRUSS is used, and only if the pruss_get() succeeds.
+ */
+void pruss_put(struct pruss *pruss)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return;
+
+	put_device(pruss->dev);
+}
+EXPORT_SYMBOL_GPL(pruss_put);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index ecfded30ed05..cb40c2b31045 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -9,7 +9,9 @@
 #ifndef _PRUSS_DRIVER_H_
 #define _PRUSS_DRIVER_H_
 
+#include <linux/remoteproc/pruss.h>
 #include <linux/types.h>
+#include <linux/err.h>
 
 /*
  * enum pruss_mem - PRUSS memory range identifiers
@@ -51,4 +53,20 @@ struct pruss {
 	struct clk *iep_clk_mux;
 };
 
+#if IS_ENABLED(CONFIG_TI_PRUSS)
+
+struct pruss *pruss_get(struct rproc *rproc);
+void pruss_put(struct pruss *pruss);
+
+#else
+
+static inline struct pruss *pruss_get(struct rproc *rproc)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void pruss_put(struct pruss *pruss) { }
+
+#endif /* CONFIG_TI_PRUSS */
+
 #endif	/* _PRUSS_DRIVER_H_ */
-- 
2.34.1

[PATCH v9 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API

[MD Danish Anwar]

From: "Andrew F. Davis" <afd@ti.com>

Add two new API - pruss_request_mem_region() & pruss_release_mem_region(),
to the PRUSS platform driver to allow client drivers to acquire and release
the common memory resources present within a PRU-ICSS subsystem. This
allows the client drivers to directly manipulate the respective memories,
as per their design contract with the associated firmware.

Co-developed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/soc/ti/pruss.c       | 77 ++++++++++++++++++++++++++++++++++++
 include/linux/pruss_driver.h | 22 +++++++++++
 2 files changed, 99 insertions(+)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 3fac92df8790..8ada3758b31a 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -92,6 +92,82 @@ void pruss_put(struct pruss *pruss)
 }
 EXPORT_SYMBOL_GPL(pruss_put);
 
+/**
+ * pruss_request_mem_region() - request a memory resource
+ * @pruss: the pruss instance
+ * @mem_id: the memory resource id
+ * @region: pointer to memory region structure to be filled in
+ *
+ * This function allows a client driver to request a memory resource,
+ * and if successful, will let the client driver own the particular
+ * memory region until released using the pruss_release_mem_region()
+ * API.
+ *
+ * Return: 0 if requested memory region is available (in such case pointer to
+ * memory region is returned via @region), an error otherwise
+ */
+int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
+			     struct pruss_mem_region *region)
+{
+	if (!pruss || !region || mem_id >= PRUSS_MEM_MAX)
+		return -EINVAL;
+
+	mutex_lock(&pruss->lock);
+
+	if (pruss->mem_in_use[mem_id]) {
+		mutex_unlock(&pruss->lock);
+		return -EBUSY;
+	}
+
+	*region = pruss->mem_regions[mem_id];
+	pruss->mem_in_use[mem_id] = region;
+
+	mutex_unlock(&pruss->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pruss_request_mem_region);
+
+/**
+ * pruss_release_mem_region() - release a memory resource
+ * @pruss: the pruss instance
+ * @region: the memory region to release
+ *
+ * This function is the complimentary function to
+ * pruss_request_mem_region(), and allows the client drivers to
+ * release back a memory resource.
+ *
+ * Return: 0 on success, an error code otherwise
+ */
+int pruss_release_mem_region(struct pruss *pruss,
+			     struct pruss_mem_region *region)
+{
+	int id;
+
+	if (!pruss || !region)
+		return -EINVAL;
+
+	mutex_lock(&pruss->lock);
+
+	/* find out the memory region being released */
+	for (id = 0; id < PRUSS_MEM_MAX; id++) {
+		if (pruss->mem_in_use[id] == region)
+			break;
+	}
+
+	if (id == PRUSS_MEM_MAX) {
+		mutex_unlock(&pruss->lock);
+		return -EINVAL;
+	}
+
+	pruss->mem_in_use[id] = NULL;
+
+	mutex_unlock(&pruss->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pruss_release_mem_region);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
@@ -294,6 +370,7 @@ static int pruss_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pruss->dev = dev;
+	mutex_init(&pruss->lock);
 
 	child = of_get_child_by_name(np, "memories");
 	if (!child) {
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index cb40c2b31045..c8f2e53b911b 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -9,6 +9,7 @@
 #ifndef _PRUSS_DRIVER_H_
 #define _PRUSS_DRIVER_H_
 
+#include <linux/mutex.h>
 #include <linux/remoteproc/pruss.h>
 #include <linux/types.h>
 #include <linux/err.h>
@@ -41,6 +42,8 @@ struct pruss_mem_region {
  * @cfg_base: base iomap for CFG region
  * @cfg_regmap: regmap for config region
  * @mem_regions: data for each of the PRUSS memory regions
+ * @mem_in_use: to indicate if memory resource is in use
+ * @lock: mutex to serialize access to resources
  * @core_clk_mux: clk handle for PRUSS CORE_CLK_MUX
  * @iep_clk_mux: clk handle for PRUSS IEP_CLK_MUX
  */
@@ -49,6 +52,8 @@ struct pruss {
 	void __iomem *cfg_base;
 	struct regmap *cfg_regmap;
 	struct pruss_mem_region mem_regions[PRUSS_MEM_MAX];
+	struct pruss_mem_region *mem_in_use[PRUSS_MEM_MAX];
+	struct mutex lock; /* PRU resource lock */
 	struct clk *core_clk_mux;
 	struct clk *iep_clk_mux;
 };
@@ -57,6 +62,10 @@ struct pruss {
 
 struct pruss *pruss_get(struct rproc *rproc);
 void pruss_put(struct pruss *pruss);
+int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
+			     struct pruss_mem_region *region);
+int pruss_release_mem_region(struct pruss *pruss,
+			     struct pruss_mem_region *region);
 
 #else
 
@@ -67,6 +76,19 @@ static inline struct pruss *pruss_get(struct rproc *rproc)
 
 static inline void pruss_put(struct pruss *pruss) { }
 
+static inline int pruss_request_mem_region(struct pruss *pruss,
+					   enum pruss_mem mem_id,
+					   struct pruss_mem_region *region)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int pruss_release_mem_region(struct pruss *pruss,
+					   struct pruss_mem_region *region)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif /* CONFIG_TI_PRUSS */
 
 #endif	/* _PRUSS_DRIVER_H_ */
-- 
2.34.1

[PATCH v9 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs

[MD Danish Anwar]

From: Suman Anna <s-anna@ti.com>

Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
the PRUSS platform driver to read and program respectively a register
within the PRUSS CFG sub-module represented by a syscon driver. These
APIs are internal to PRUSS driver.

Add two new helper functions pruss_cfg_get_gpmux() & pruss_cfg_set_gpmux()
to get and set the GP MUX mode for programming the PRUSS internal wrapper
mux functionality as needed by usecases.

Various useful registers and macros for certain register bit-fields and
their values have also been added.

Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/soc/ti/pruss.c       | 45 ++++++++++++++++++
 drivers/soc/ti/pruss.h       | 88 ++++++++++++++++++++++++++++++++++++
 include/linux/pruss_driver.h | 32 +++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 drivers/soc/ti/pruss.h

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 8ada3758b31a..4ad6ccb039c8 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -21,6 +21,7 @@
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 #include <linux/slab.h>
+#include "pruss.h"
 
 /**
  * struct pruss_private_data - PRUSS driver private data
@@ -168,6 +169,50 @@ int pruss_release_mem_region(struct pruss *pruss,
 }
 EXPORT_SYMBOL_GPL(pruss_release_mem_region);
 
+/**
+ * pruss_cfg_get_gpmux() - get the current GPMUX value for a PRU device
+ * @pruss: pruss instance
+ * @pru_id: PRU identifier (0-1)
+ * @mux: pointer to store the current mux value into
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux)
+{
+	int ret;
+	u32 val;
+
+	if (pru_id >= PRUSS_NUM_PRUS || !mux)
+		return -EINVAL;
+
+	ret = pruss_cfg_read(pruss, PRUSS_CFG_GPCFG(pru_id), &val);
+	if (!ret)
+		*mux = (u8)((val & PRUSS_GPCFG_PRU_MUX_SEL_MASK) >>
+			    PRUSS_GPCFG_PRU_MUX_SEL_SHIFT);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_get_gpmux);
+
+/**
+ * pruss_cfg_set_gpmux() - set the GPMUX value for a PRU device
+ * @pruss: pruss instance
+ * @pru_id: PRU identifier (0-1)
+ * @mux: new mux value for PRU
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux)
+{
+	if (mux >= PRUSS_GP_MUX_SEL_MAX ||
+	    pru_id >= PRUSS_NUM_PRUS)
+		return -EINVAL;
+
+	return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
+				PRUSS_GPCFG_PRU_MUX_SEL_MASK,
+				(u32)mux << PRUSS_GPCFG_PRU_MUX_SEL_SHIFT);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_set_gpmux);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h
new file mode 100644
index 000000000000..6c55987e0e55
--- /dev/null
+++ b/drivers/soc/ti/pruss.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PRU-ICSS Subsystem user interfaces
+ *
+ * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com
+ *	MD Danish Anwar <danishanwar@ti.com>
+ */
+
+#ifndef _SOC_TI_PRUSS_H_
+#define _SOC_TI_PRUSS_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+/*
+ * PRU_ICSS_CFG registers
+ * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only
+ */
+#define PRUSS_CFG_REVID         0x00
+#define PRUSS_CFG_SYSCFG        0x04
+#define PRUSS_CFG_GPCFG(x)      (0x08 + (x) * 4)
+#define PRUSS_CFG_CGR           0x10
+#define PRUSS_CFG_ISRP          0x14
+#define PRUSS_CFG_ISP           0x18
+#define PRUSS_CFG_IESP          0x1C
+#define PRUSS_CFG_IECP          0x20
+#define PRUSS_CFG_SCRP          0x24
+#define PRUSS_CFG_PMAO          0x28
+#define PRUSS_CFG_MII_RT        0x2C
+#define PRUSS_CFG_IEPCLK        0x30
+#define PRUSS_CFG_SPP           0x34
+#define PRUSS_CFG_PIN_MX        0x40
+
+/* PRUSS_GPCFG register bits */
+#define PRUSS_GPCFG_PRU_GPI_MODE_MASK           GENMASK(1, 0)
+#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT          0
+
+#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT           26
+#define PRUSS_GPCFG_PRU_MUX_SEL_MASK            GENMASK(29, 26)
+
+/* PRUSS_MII_RT register bits */
+#define PRUSS_MII_RT_EVENT_EN                   BIT(0)
+
+/* PRUSS_SPP register bits */
+#define PRUSS_SPP_XFER_SHIFT_EN                 BIT(1)
+#define PRUSS_SPP_PRU1_PAD_HP_EN                BIT(0)
+#define PRUSS_SPP_RTU_XFR_SHIFT_EN              BIT(3)
+
+/**
+ * pruss_cfg_read() - read a PRUSS CFG sub-module register
+ * @pruss: the pruss instance handle
+ * @reg: register offset within the CFG sub-module
+ * @val: pointer to return the value in
+ *
+ * Reads a given register within the PRUSS CFG sub-module and
+ * returns it through the passed-in @val pointer
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return -EINVAL;
+
+	return regmap_read(pruss->cfg_regmap, reg, val);
+}
+
+/**
+ * pruss_cfg_update() - configure a PRUSS CFG sub-module register
+ * @pruss: the pruss instance handle
+ * @reg: register offset within the CFG sub-module
+ * @mask: bit mask to use for programming the @val
+ * @val: value to write
+ *
+ * Programs a given register within the PRUSS CFG sub-module
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+static int pruss_cfg_update(struct pruss *pruss, unsigned int reg,
+			    unsigned int mask, unsigned int val)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return -EINVAL;
+
+	return regmap_update_bits(pruss->cfg_regmap, reg, mask, val);
+}
+
+#endif  /* _SOC_TI_PRUSS_H_ */
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index c8f2e53b911b..5bb8897724a9 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -14,6 +14,24 @@
 #include <linux/types.h>
 #include <linux/err.h>
 
+/*
+ * enum pruss_gp_mux_sel - PRUSS GPI/O Mux modes for the
+ * PRUSS_GPCFG0/1 registers
+ *
+ * NOTE: The below defines are the most common values, but there
+ * are some exceptions like on 66AK2G, where the RESERVED and MII2
+ * values are interchanged. Also, this bit-field does not exist on
+ * AM335x SoCs
+ */
+enum pruss_gp_mux_sel {
+	PRUSS_GP_MUX_SEL_GP,
+	PRUSS_GP_MUX_SEL_ENDAT,
+	PRUSS_GP_MUX_SEL_RESERVED,
+	PRUSS_GP_MUX_SEL_SD,
+	PRUSS_GP_MUX_SEL_MII2,
+	PRUSS_GP_MUX_SEL_MAX,
+};
+
 /*
  * enum pruss_mem - PRUSS memory range identifiers
  */
@@ -66,6 +84,8 @@ int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id,
 			     struct pruss_mem_region *region);
 int pruss_release_mem_region(struct pruss *pruss,
 			     struct pruss_mem_region *region);
+int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux);
+int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux);
 
 #else
 
@@ -89,6 +109,18 @@ static inline int pruss_release_mem_region(struct pruss *pruss,
 	return -EOPNOTSUPP;
 }
 
+static inline int pruss_cfg_get_gpmux(struct pruss *pruss,
+				      enum pruss_pru_id pru_id, u8 *mux)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_set_gpmux(struct pruss *pruss,
+				      enum pruss_pru_id pru_id, u8 mux)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 #endif /* CONFIG_TI_PRUSS */
 
 #endif	/* _PRUSS_DRIVER_H_ */
-- 
2.34.1

[PATCH v9 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR

[MD Danish Anwar]

From: Suman Anna <s-anna@ti.com>

The PRUSS CFG module is represented as a syscon node and is currently
managed by the PRUSS platform driver. Add easy accessor functions to set
GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
to enable the PRUSS Ethernet usecase. These functions reuse the generic
pruss_cfg_update() API function.

Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/remoteproc/pru_rproc.c | 15 -------
 drivers/soc/ti/pruss.c         | 71 ++++++++++++++++++++++++++++++++++
 include/linux/pruss_driver.h   | 51 ++++++++++++++++++++++++
 3 files changed, 122 insertions(+), 15 deletions(-)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 095f66130f48..54f5ce302e7a 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -81,21 +81,6 @@ enum pru_iomem {
 	PRU_IOMEM_MAX,
 };
 
-/**
- * enum pru_type - PRU core type identifier
- *
- * @PRU_TYPE_PRU: Programmable Real-time Unit
- * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
- * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit
- * @PRU_TYPE_MAX: just keep this one at the end
- */
-enum pru_type {
-	PRU_TYPE_PRU = 0,
-	PRU_TYPE_RTU,
-	PRU_TYPE_TX_PRU,
-	PRU_TYPE_MAX,
-};
-
 /**
  * struct pru_private_data - device data for a PRU core
  * @type: type of the PRU core (PRU, RTU, Tx_PRU)
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 4ad6ccb039c8..f002fd9e79c6 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -213,6 +213,77 @@ int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux)
 }
 EXPORT_SYMBOL_GPL(pruss_cfg_set_gpmux);
 
+/**
+ * pruss_cfg_gpimode() - set the GPI mode of the PRU
+ * @pruss: the pruss instance handle
+ * @pru_id: id of the PRU core within the PRUSS
+ * @mode: GPI mode to set
+ *
+ * Sets the GPI mode for a given PRU by programming the
+ * corresponding PRUSS_CFG_GPCFGx register
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+		      enum pruss_gpi_mode mode)
+{
+	if (pru_id >= PRUSS_NUM_PRUS || mode >= PRUSS_GPI_MODE_MAX)
+		return -EINVAL;
+
+	return pruss_cfg_update(pruss, PRUSS_CFG_GPCFG(pru_id),
+				PRUSS_GPCFG_PRU_GPI_MODE_MASK,
+				mode << PRUSS_GPCFG_PRU_GPI_MODE_SHIFT);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_gpimode);
+
+/**
+ * pruss_cfg_miirt_enable() - Enable/disable MII RT Events
+ * @pruss: the pruss instance
+ * @enable: enable/disable
+ *
+ * Enable/disable the MII RT Events for the PRUSS.
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+	u32 set = enable ? PRUSS_MII_RT_EVENT_EN : 0;
+
+	return pruss_cfg_update(pruss, PRUSS_CFG_MII_RT,
+				PRUSS_MII_RT_EVENT_EN, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_miirt_enable);
+
+/**
+ * pruss_cfg_xfr_enable() - Enable/disable XIN XOUT shift functionality
+ * @pruss: the pruss instance
+ * @pru_type: PRU core type identifier
+ * @enable: enable/disable
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int pruss_cfg_xfr_enable(struct pruss *pruss, enum pru_type pru_type,
+			 bool enable)
+{
+	u32 mask, set;
+
+	switch (pru_type) {
+	case PRU_TYPE_PRU:
+		mask = PRUSS_SPP_XFER_SHIFT_EN;
+		break;
+	case PRU_TYPE_RTU:
+		mask = PRUSS_SPP_RTU_XFR_SHIFT_EN;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	set = enable ? mask : 0;
+
+	return pruss_cfg_update(pruss, PRUSS_CFG_SPP, mask, set);
+}
+EXPORT_SYMBOL_GPL(pruss_cfg_xfr_enable);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index 5bb8897724a9..c9a31c567e85 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -32,6 +32,33 @@ enum pruss_gp_mux_sel {
 	PRUSS_GP_MUX_SEL_MAX,
 };
 
+/*
+ * enum pruss_gpi_mode - PRUSS GPI configuration modes, used
+ *			 to program the PRUSS_GPCFG0/1 registers
+ */
+enum pruss_gpi_mode {
+	PRUSS_GPI_MODE_DIRECT,
+	PRUSS_GPI_MODE_PARALLEL,
+	PRUSS_GPI_MODE_28BIT_SHIFT,
+	PRUSS_GPI_MODE_MII,
+	PRUSS_GPI_MODE_MAX,
+};
+
+/**
+ * enum pru_type - PRU core type identifier
+ *
+ * @PRU_TYPE_PRU: Programmable Real-time Unit
+ * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
+ * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit
+ * @PRU_TYPE_MAX: just keep this one at the end
+ */
+enum pru_type {
+	PRU_TYPE_PRU,
+	PRU_TYPE_RTU,
+	PRU_TYPE_TX_PRU,
+	PRU_TYPE_MAX,
+};
+
 /*
  * enum pruss_mem - PRUSS memory range identifiers
  */
@@ -86,6 +113,11 @@ int pruss_release_mem_region(struct pruss *pruss,
 			     struct pruss_mem_region *region);
 int pruss_cfg_get_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 *mux);
 int pruss_cfg_set_gpmux(struct pruss *pruss, enum pruss_pru_id pru_id, u8 mux);
+int pruss_cfg_gpimode(struct pruss *pruss, enum pruss_pru_id pru_id,
+		      enum pruss_gpi_mode mode);
+int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable);
+int pruss_cfg_xfr_enable(struct pruss *pruss, enum pru_type pru_type,
+			 bool enable);
 
 #else
 
@@ -121,6 +153,25 @@ static inline int pruss_cfg_set_gpmux(struct pruss *pruss,
 	return ERR_PTR(-EOPNOTSUPP);
 }
 
+static inline int pruss_cfg_gpimode(struct pruss *pruss,
+				    enum pruss_pru_id pru_id,
+				    enum pruss_gpi_mode mode)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_miirt_enable(struct pruss *pruss, bool enable)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline int pruss_cfg_xfr_enable(struct pruss *pruss,
+				       enum pru_type pru_type,
+				       bool enable);
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 #endif /* CONFIG_TI_PRUSS */
 
 #endif	/* _PRUSS_DRIVER_H_ */
-- 
2.34.1

Re: [PATCH v9 0/4] Introduce PRU platform consumer API

[Nishanth Menon]

Hi MD Danish Anwar,

On Fri, 14 Apr 2023 10:25:38 +0530, MD Danish Anwar wrote:
> The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS
> or simply PRUSS) on various TI SoCs consists of dual 32-bit RISC cores
> (Programmable Real-Time Units, or PRUs) for program execution.
> 
> There are 3 foundation components for TI PRUSS subsystem: the PRUSS platform
> driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All of them have
> already been merged and can be found under:
> 1) drivers/soc/ti/pruss.c
>    Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
> 2) drivers/irqchip/irq-pruss-intc.c
>    Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
> 3) drivers/remoteproc/pru_rproc.c
>    Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
> 
> [...]

I have applied the following to branch ti-drivers-soc-next on [1].
Thank you for your patience in following up and incorporating all the fixes
and the multiple hand-overs!

[1/4] soc: ti: pruss: Add pruss_get()/put() API
      commit: 67d1b0a1030fb20d54b720df6e976c06b893fb00
[2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
      commit: b789ca1e3380ab63b60c3356c026a7e8eb26ba01
[3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
      commit: 51b5760e56ef19106a3c4487a66d186d46ccc6f4
[4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
      commit: 0211cc1e4fbbc81853227147bf0982c47362c567

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D