From: Suman Anna <s-anna@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tero Kristo <t-kristo@ti.com>, Suman Anna <s-anna@ti.com>
Subject: [PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5
Date: Thu, 9 Jul 2020 18:19:41 -0500 [thread overview]
Message-ID: <20200709231954.1973-1-s-anna@ti.com> (raw)
Hi Tony,
The following series contains all the necessary DT pieces to boot the
IPU and DSP remote processors on OMAP4 and OMAP5 SoCs. They are
enabled specifically on the TI OMAP4 PandaBoard and OMAP5 uEVM boards.
This is the last DT piece that now completes the support for IPUs and
DSPs on all OMAP4+ SoCs, similar patches were merged for 5.8 covering
the DRA7xx/AM57xx SoCs. Appreciate it if you can pick up the series for
5.9 if it isn't too late.
There is one issue that I have run into while testing this series on
the latest kernel. I am seeing a l3_noc error for OMAP4 DSP when it
attempts to auto-suspend or stop after it is booted. The issue is a
L4CFG read error that happens in the sysc_disable_module() function
in ti-sysc code.
I do not have any issues on my downstream 5.4 based SDK kernel. I have
root-caused this to the OMAP4 voltage controller patches you added for
5.5 kernel through your omap-for-v5.5/pm branch, specifically the
commit 4873843718f9 ("ARM: OMAP2+: Initialize voltage controller for omap4").
The VOLTCTRL register value is 0x300 before that patch, and modifying
this register either through omap4_vc_init_pmic_signaling() or
omap4_vc_set_pmic_signaling() will trigger this. A debug print in
sysc_disable_module() also seems to help.
regards
Suman
Suman Anna (13):
ARM: dts: omap4: Add timer_sys_ck clocks for timers
ARM: dts: omap5: Add timer_sys_ck clocks for timers
ARM: dts: omap4: Update the DSP node
ARM: dts: omap4: Add IPU DT node
ARM: dts: omap4: Add aliases for rproc nodes
ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP
ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU
ARM: dts: omap5: Add DSP and IPU nodes
ARM: dts: omap5: Add aliases for rproc nodes
ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP
ARM: dts: omap5-uevm: Add system timers to DSP and IPU
ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP
ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP
arch/arm/boot/dts/omap4-l4-abe.dtsi | 20 +++++++------
arch/arm/boot/dts/omap4-l4.dtsi | 35 ++++++++++++++---------
arch/arm/boot/dts/omap4-panda-common.dtsi | 34 ++++++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 29 ++++++++++++++++---
arch/arm/boot/dts/omap5-l4-abe.dtsi | 20 +++++++------
arch/arm/boot/dts/omap5-l4.dtsi | 35 ++++++++++++++---------
arch/arm/boot/dts/omap5-uevm.dts | 34 ++++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 25 ++++++++++++++++
8 files changed, 184 insertions(+), 48 deletions(-)
--
2.26.0
next reply other threads:[~2020-07-09 23:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 23:19 Suman Anna [this message]
2020-07-09 23:19 ` [PATCH 01/13] ARM: dts: omap4: Add timer_sys_ck clocks for timers Suman Anna
2020-07-09 23:19 ` [PATCH 02/13] ARM: dts: omap5: " Suman Anna
2020-07-09 23:19 ` [PATCH 03/13] ARM: dts: omap4: Update the DSP node Suman Anna
2020-07-09 23:19 ` [PATCH 04/13] ARM: dts: omap4: Add IPU DT node Suman Anna
2020-07-09 23:19 ` [PATCH 05/13] ARM: dts: omap4: Add aliases for rproc nodes Suman Anna
2020-07-09 23:19 ` [PATCH 06/13] ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP Suman Anna
2020-08-12 5:31 ` Guillaume Tucker
2020-08-14 14:32 ` Guillaume Tucker
2020-08-14 15:26 ` Suman Anna
2020-08-14 16:33 ` Guillaume Tucker
2020-08-14 19:33 ` Suman Anna
2020-08-20 9:17 ` Guillaume Tucker
2020-07-09 23:19 ` [PATCH 07/13] ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU Suman Anna
2020-07-09 23:19 ` [PATCH 08/13] ARM: dts: omap5: Add DSP and IPU nodes Suman Anna
2020-07-09 23:19 ` [PATCH 09/13] ARM: dts: omap5: Add aliases for rproc nodes Suman Anna
2020-07-09 23:19 ` [PATCH 10/13] ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP Suman Anna
2020-07-09 23:19 ` [PATCH 11/13] ARM: dts: omap5-uevm: Add system timers to DSP and IPU Suman Anna
2020-07-09 23:19 ` [PATCH 12/13] ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP Suman Anna
2020-07-09 23:19 ` [PATCH 13/13] ARM: dts: omap5-uevm: " Suman Anna
2020-07-10 16:58 ` [PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5 Tony Lindgren
2020-07-10 17:17 ` Suman Anna
2020-07-10 17:28 ` Suman Anna
2020-07-10 17:59 ` Tony Lindgren
2020-07-10 18:29 ` Suman Anna
2020-07-10 20:45 ` Suman Anna
2020-07-10 22:08 ` Tony Lindgren
2020-07-10 17:40 ` Tony Lindgren
2020-07-10 18:24 ` Suman Anna
2020-07-13 18:24 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200709231954.1973-1-s-anna@ti.com \
--to=s-anna@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).