messages from 2020-05-08 05:09:15 to 2020-05-21 19:50:34 UTC [more...]
[PATCH] arm: dts: am335x-boneblack: add gpio-line-names
2020-05-21 19:50 UTC
[PATCH v2] arm: dts: am33xx-bone-common: add gpio-line-names
2020-05-21 19:23 UTC (5+ messages)
[PATCH v4 00/14] Add PCIe support to TI's J721E SoC
2020-05-21 13:33 UTC (21+ messages)
` [PATCH v4 01/14] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
` [PATCH v4 02/14] linux/kernel.h: Add PTR_ALIGN_DOWN macro
` [PATCH v4 03/14] PCI: cadence: Add support to use custom read and write accessors
` [PATCH v4 04/14] PCI: cadence: Add support to start link and verify link status
` [PATCH v4 07/14] PCI: cadence: Add new *ops* for CPU addr fixup
` [PATCH v4 08/14] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
` [PATCH v4 13/14] misc: pci_endpoint_test: Add J721E in pci_device_id table
` [PATCH v4 14/14] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
[PATCHv2 0/6] Add initial genpd support for omap PRM driver
2020-05-21 4:53 UTC (8+ messages)
` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd
` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support
` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4
` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe "
[balbi-usb:next 69/89] drivers/usb/dwc3/core.c:292:2: note: in expansion of macro 'if'
2020-05-21 4:28 UTC
AM3517 MUSB and CPPI
2020-05-21 2:44 UTC (5+ messages)
[PATCH] arm: dts: am33xx-bone-common: add gpio-line-names
2020-05-20 22:02 UTC (9+ messages)
[balbi-usb:next 69/89] drivers/usb/dwc3/gadget.c:1885:7: note: in expansion of macro 'DWC3_VER_IS_WITHIN'
2020-05-20 16:51 UTC
[PATCH] PCI: dwc: pci-dra7xx: fix runtime pm imbalance on error
2020-05-20 8:47 UTC
[PATCH] clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare()
2020-05-20 9:03 UTC (4+ messages)
[PATCH] ARM: OMAP2+: remove unneeded variable "errata" in configure_dma_errata()
2020-05-20 7:08 UTC (4+ messages)
[PATCH 1/1] soc: ti: omap-prm: use atomic iopoll instead of sleeping one
2020-05-19 18:04 UTC (3+ messages)
[PATCH] clocksource/drivers/timer-ti-dm: Fix warning for set but not used
2020-05-19 16:28 UTC (5+ messages)
[PATCH v2] arm: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver
2020-05-19 16:04 UTC (7+ messages)
[PATCHv3 00/14] Update omaps to use drivers/clocksource timers
2020-05-18 17:01 UTC (4+ messages)
[balbi-usb:testing/fixes 2/8] WARNING: simple_strtoul is obsolete, use kstrtoul instead
2020-05-18 14:59 UTC (3+ messages)
` [kbuild-all] "
[PATCH] clk/ti/adpll: Add a NULL check for devm_kasprintf()
2020-05-18 3:55 UTC (2+ messages)
[balbi-usb:testing/next 86/89] FATAL ERROR: Unable to parse input tree
2020-05-16 12:32 UTC
[balbi-usb:testing/next 86/89] Error: arch/arm64/boot/dts/qcom/sc7180.dtsi:1450.33-34 syntax error
2020-05-16 11:17 UTC
[balbi-usb:testing/next] BUILD SUCCESS a65a1ec70639afa5ff7990cf33213dd41f3c7176
2020-05-15 17:34 UTC
[PATCH v1] mfd: tps65910: Correct power-off programming sequence
2020-05-15 17:30 UTC (3+ messages)
[PATCH v7 00/12] ARM/MIPS: DTS: add child nodes describing the PVRSGX GPU present in some OMAP SoC and JZ4780 (and many more)
2020-05-15 7:59 UTC (13+ messages)
` [PATCH v7 01/12] dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
[balbi-usb:testing/next] BUILD SUCCESS 55f322974cbe2878bcfaec3804257c68ac90ee6f
2020-05-15 0:31 UTC
[PATCH] clk: ti: dra7: remove two unused symbols
2020-05-14 20:02 UTC (4+ messages)
[PATCH 0/3] clk: ti: dra7xx: clkctrl data fixes
2020-05-14 19:55 UTC (7+ messages)
` [PATCH 1/3] clk: ti: dra7xx: fix gpu clkctrl parent
` [PATCH 2/3] clk: ti: dra7xx: mark MCAN clock as DRA76x only
` [PATCH 3/3] clk: ti: dra7xx: fix RNG clock parent
[PATCH 0/3] clk: ti: couple of fixes towards 5.8
2020-05-14 19:55 UTC (7+ messages)
` [PATCH 1/3] clk: ti: composite: fix memory leak
` [PATCH 2/3] clk: ti: omap4: Add proper parent clocks for l4-secure clocks
` [PATCH 3/3] clk: ti: omap5: "
[balbi-usb:testing/fixes] BUILD SUCCESS 172b14b48ca10b280482b164506892ea09edb946
2020-05-14 18:28 UTC
[PATCHv8 0/6] n_gsm serdev support and GNSS driver for droid4
2020-05-14 17:31 UTC (12+ messages)
` [PATCH 1/6] tty: n_gsm: Add support for serdev drivers
` [PATCH 2/6] dt-bindings: serdev: ngsm: Add binding for serdev-ngsm
` [PATCH 3/6] dt-bindings: serdev: ngsm: Add binding for GNSS child node
` [PATCH 4/6] serdev: ngsm: Add generic serdev-ngsm driver
` [PATCH 5/6] gnss: motmdm: Add support for Motorola Mapphone MDM6600 modem
` [PATCH 6/6] ARM: dts: omap4-droid4: Configure modem for serdev-ngsm
[GIT PULL] Three network phy fixes for am57xx and am437x
2020-05-14 16:02 UTC
[PATCH 0/6] Add initial genpd support for omap PRM driver
2020-05-14 15:18 UTC (11+ messages)
` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd
` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support
` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4
` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe "
[balbi-usb:testing/next 78/89] drivers/usb/dwc3/gadget.c:2842:7: error: implicit declaration of function 'DWC3_VER_IS_WITHIN'
2020-05-14 12:08 UTC (2+ messages)
[GIT PULL] SoC changes for omaps for v5.8
2020-05-13 16:35 UTC
mmotm 2020-05-11-15-43 uploaded (ethernet/ti/ti_cpsw)
2020-05-13 15:18 UTC (2+ messages)
[PATCH] clk: ti: clkctrl: convert subclocks to use proper names also
2020-05-13 3:18 UTC (2+ messages)
[PATCH] clk: ti: am33xx: fix RTC clock parent
2020-05-13 3:17 UTC (2+ messages)
[PATCH 1/1] clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
2020-05-13 3:16 UTC (2+ messages)
[PATCH] power: supply: cpcap-charger: Make VBUS already provided debug only
2020-05-12 21:51 UTC
[PATCH] ARM: dts: Fix wrong mdio clock for dm814x
2020-05-12 21:04 UTC
[PATCH net v4] net: ethernet: ti: Remove TI_CPTS_MOD workaround
2020-05-12 19:35 UTC (6+ messages)
[PATCH] ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'
2020-05-12 16:45 UTC (3+ messages)
[balbi-usb:testing/fixes] BUILD SUCCESS 07aa17095faf7d57587349ad3817b0d7985ebde3
2020-05-12 15:57 UTC
Bug with omap3-isp - 30 seconds delay for probe success
2020-05-12 15:44 UTC (2+ messages)
[PATCH -next] ARM: OMAP2+: pm33xx-core: Make am43xx_get_rtc_base_addr static
2020-05-12 15:40 UTC (2+ messages)
[PATCH] ARM: omap2: make omap5_erratum_workaround_801819 static
2020-05-12 15:39 UTC (2+ messages)
[PATCHv6 0/6] n_gsm serdev support and GNSS driver for droid4
2020-05-12 15:37 UTC (3+ messages)
` [PATCH 2/6] dt-bindings: serdev: ngsm: Add binding for serdev-ngsm
BBB with v5.7-rc5
2020-05-12 15:33 UTC (7+ messages)
[PATCHv2 00/15] Update omaps to use drivers/clocksource timers
2020-05-12 14:56 UTC (4+ messages)
` [PATCH 02/15] dt-bindings: timer: add ti,dmtimer compatible for for system timers
` [PATCH 02/15] dt-bindings: timer: add ti, dmtimer "
[PATCH v7 00/15] Add support for devices in the Energy Model
2020-05-12 11:38 UTC (25+ messages)
` [PATCH v7 01/15] PM / EM: change naming convention from 'capacity' to 'performance'
` [PATCH v7 02/15] PM / EM: introduce em_dev_register_perf_domain function
` [PATCH v7 03/15] PM / EM: update callback structure and add device pointer
` [PATCH v7 04/15] PM / EM: add support for other devices than CPUs in Energy Model
` [PATCH v7 05/15] PM / EM: remove em_register_perf_domain
` [PATCH v7 06/15] PM / EM: change name of em_pd_energy to em_cpu_energy
` [PATCH v7 07/15] Documentation: power: update Energy Model description
` [PATCH v7 08/15] OPP: refactor dev_pm_opp_of_register_em() and update related drivers
` [PATCH v7 09/15] thermal: devfreq_cooling: change tracing function and arguments
` [PATCH v7 10/15] thermal: devfreq_cooling: get device load and frequency directly
` [PATCH v7 11/15] thermal: devfreq_cooling: work on a copy of device status
` [PATCH v7 12/15] thermal: devfreq_cooling: add new registration functions with Energy Model
` [PATCH v7 13/15] thermal: devfreq_cooling: remove old power model and use EM
` [PATCH v7 14/15] thermal: devfreq_cooling: update license to use SPDX
` [PATCH v7 15/15] drm/panfrost: Register devfreq cooling and attempt to add Energy Model
[PATCH net v3] net: ethernet: ti: fix build and remove TI_CPTS_MOD workaround
2020-05-12 8:53 UTC (6+ messages)
[PATCHv2 0/7] crypto: omap: sha/aes fixes
2020-05-11 11:19 UTC (8+ messages)
` [PATCHv2 1/7] crypto: omap-aes: avoid spamming console with self tests
` [PATCHv2 2/7] crypto: omap-sham: force kernel driver usage for sha algos
` [PATCHv2 3/7] crypto: omap-crypto: fix userspace copied buffer access
` [PATCHv2 4/7] crypto: omap-sham: huge buffer access fixes
` [PATCHv2 5/7] crypto: omap-sham: fix very small data size handling
` [PATCHv2 6/7] crypto: omap-aes: prevent unregistering algorithms twice
` [PATCHv2 7/7] crypto: omap-sham: add proper load balancing support for multicore
[omap:serdev-ngsm-pending-v5.7 20/29] drivers/gnss/motmdm.c:71:5: sparse: sparse: symbol 'motmdm_gnss_send_command' was not declared. Should it be static?
2020-05-10 15:36 UTC (2+ messages)
` [RFC PATCH omap] gnss: motmdm: motmdm_gnss_send_command() can be static
USB networking news, ofono for d4: less hacked version
2020-05-09 19:36 UTC (8+ messages)
` ofono for d4: less hcked and more working version was "
[balbi-usb:testing/fixes] BUILD SUCCESS 6e507644209b4a043363e165855a3a3050c4d40e
2020-05-09 16:13 UTC
[PATCHv3] w1: omap-hdq: Simplify driver with PM runtime autosuspend
2020-05-09 13:59 UTC (12+ messages)
[PATCH 4.4 278/312] net: ethernet: ti: cpsw: fix device and of_node leaks
2020-05-08 12:34 UTC
[PATCH net 00/16] net: fix fixed-link phydev leaks
2020-05-08 12:02 UTC (9+ messages)
` [PATCH net 11/16] net: ethernet: marvell: mvneta: "
crypto: omap: sha/aes fixes
2020-05-08 5:47 UTC (4+ messages)
` [PATCH 3/6] crypto: omap-crypto: fix userspace copied buffer access
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).