From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, broonie@kernel.org,
lorenzo.pieralisi@arm.com, jingoohan1@gmail.com
Cc: linux-pci@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v4 2/6] PCI: imx6: Add the error propagation from host_init
Date: Mon, 1 Nov 2021 14:17:54 +0800 [thread overview]
Message-ID: <1635747478-25562-3-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1635747478-25562-1-git-send-email-hongxing.zhu@nxp.com>
Since there is error return check of the host_init callback, add error
check to imx6_pcie_deassert_core_reset() function, and change the
function type accordingly.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 3bf041314ba7..65a10b048a8b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -527,24 +527,24 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
dev_err(dev, "PCIe PLL lock timeout\n");
}
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
- int ret;
+ int ret, err;
if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
ret = regulator_enable(imx6_pcie->vpcie);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
ret);
- return;
+ return ret;
}
}
- ret = imx6_pcie_clk_enable(imx6_pcie);
- if (ret) {
- dev_err(dev, "unable to enable pcie clocks\n");
+ err = imx6_pcie_clk_enable(imx6_pcie);
+ if (err) {
+ dev_err(dev, "unable to enable pcie clocks: %d\n", err);
goto err_clks;
}
@@ -599,7 +599,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
break;
}
- return;
+ return 0;
err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
@@ -608,6 +608,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
ret);
}
+ return err;
}
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
@@ -858,11 +859,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct device *dev = pci->dev;
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ int ret;
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (ret < 0) {
+ dev_err(dev, "pcie host init failed: %d.\n", ret);
+ return ret;
+ }
+
imx6_setup_phy_mpll(imx6_pcie);
return 0;
--
2.25.1
next prev parent reply other threads:[~2021-11-01 6:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 6:17 [PATCH v4 0/6] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-11-01 6:17 ` [PATCH v4 1/6] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-11-01 6:17 ` Richard Zhu [this message]
2021-11-01 6:17 ` [PATCH v4 3/6] PCI: imx6: PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2021-11-15 7:05 ` Hongxing Zhu
2021-11-01 6:17 ` [PATCH v4 4/6] PCI: dwc: Add dw_pcie_host_ops.host_exit() callback Richard Zhu
2021-11-01 6:17 ` [PATCH v4 5/6] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2021-11-01 15:36 ` Mark Brown
2021-11-01 6:17 ` [PATCH v4 6/6] PCI: imx6: Add the compliance tests mode support Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1635747478-25562-3-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).