linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hongxing Zhu <hongxing.zhu@nxp.com>
To: "l.stach@pengutronix.de" <l.stach@pengutronix.de>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"jingoohan1@gmail.com" <jingoohan1@gmail.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: RE: [PATCH v4 3/6] PCI: imx6: PCI: imx6: Move imx6_pcie_clk_disable() earlier
Date: Mon, 15 Nov 2021 07:05:08 +0000	[thread overview]
Message-ID: <AS8PR04MB867629EA8ACE2F9FD8C755FB8C989@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <1635747478-25562-4-git-send-email-hongxing.zhu@nxp.com>

Hi Lucas:
Can you help to take a look at this v4 series, and give your ack for other 4 patches of this patch-set if you're fine with them?
Thus, I can ping Lorenzo to help merge the v4 set firstly before the merger of the i.MX8MM PCIe support patches.
Thanks in advanced.

Best Regards
Richard Zhu

> -----Original Message-----
> From: Richard Zhu <hongxing.zhu@nxp.com>
> Sent: Monday, November 1, 2021 2:18 PM
> To: l.stach@pengutronix.de; bhelgaas@google.com; broonie@kernel.org;
> lorenzo.pieralisi@arm.com; jingoohan1@gmail.com
> Cc: linux-pci@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> kernel@pengutronix.de; Richard Zhu <hongxing.zhu@nxp.com>
> Subject: [PATCH v4 3/6] PCI: imx6: PCI: imx6: Move
> imx6_pcie_clk_disable() earlier
> 
> Just move the imx6_pcie_clk_disable() to an earlier place without
> function changes, since it wouldn't be only used in
> imx6_pcie_suspend_noirq() later.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 46 +++++++++++++--------------
>  1 file changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 65a10b048a8b..11265c5e5782 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -514,6 +514,29 @@ static int imx6_pcie_clk_enable(struct
> imx6_pcie *imx6_pcie)
>  	return ret;
>  }
> 
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) {
> +	clk_disable_unprepare(imx6_pcie->pcie);
> +	clk_disable_unprepare(imx6_pcie->pcie_phy);
> +	clk_disable_unprepare(imx6_pcie->pcie_bus);
> +
> +	switch (imx6_pcie->drvdata->variant) {
> +	case IMX6SX:
> +		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> +		break;
> +	case IMX7D:
> +		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> +		break;
> +	case IMX8MQ:
> +		clk_disable_unprepare(imx6_pcie->pcie_aux);
> +		break;
> +	default:
> +		break;
> +	}
> +}
> +
>  static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie
> *imx6_pcie)  {
>  	u32 val;
> @@ -940,29 +963,6 @@ static void imx6_pcie_pm_turnoff(struct
> imx6_pcie *imx6_pcie)
>  	usleep_range(1000, 10000);
>  }
> 
> -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) -{
> -	clk_disable_unprepare(imx6_pcie->pcie);
> -	clk_disable_unprepare(imx6_pcie->pcie_phy);
> -	clk_disable_unprepare(imx6_pcie->pcie_bus);
> -
> -	switch (imx6_pcie->drvdata->variant) {
> -	case IMX6SX:
> -		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> -		break;
> -	case IMX7D:
> -		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> -		break;
> -	case IMX8MQ:
> -		clk_disable_unprepare(imx6_pcie->pcie_aux);
> -		break;
> -	default:
> -		break;
> -	}
> -}
> -
>  static int imx6_pcie_suspend_noirq(struct device *dev)  {
>  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
> --
> 2.25.1


  reply	other threads:[~2021-11-15  7:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-01  6:17 [PATCH v4 0/6] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2021-11-01  6:17 ` [PATCH v4 1/6] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2021-11-01  6:17 ` [PATCH v4 2/6] PCI: imx6: Add the error propagation from host_init Richard Zhu
2021-11-01  6:17 ` [PATCH v4 3/6] PCI: imx6: PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2021-11-15  7:05   ` Hongxing Zhu [this message]
2021-11-01  6:17 ` [PATCH v4 4/6] PCI: dwc: Add dw_pcie_host_ops.host_exit() callback Richard Zhu
2021-11-01  6:17 ` [PATCH v4 5/6] PCI: imx6: Fix the regulator dump when link never came up Richard Zhu
2021-11-01 15:36   ` Mark Brown
2021-11-01  6:17 ` [PATCH v4 6/6] PCI: imx6: Add the compliance tests mode support Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB867629EA8ACE2F9FD8C755FB8C989@AS8PR04MB8676.eurprd04.prod.outlook.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).