From: Niklas Cassel <niklas.cassel@axis.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Niklas Cassel <niklass@axis.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode
Date: Wed, 20 Dec 2017 00:29:28 +0100 [thread overview]
Message-ID: <20171219232940.659-8-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171219232940.659-1-niklas.cassel@axis.com>
Refactor the Kconfig and Makefile handling for host/ep mode, since
the previous handling was a bit unorthodox and would have been a bit
bloated once more DWC based controllers added support for ep mode.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/dwc/Kconfig | 45 ++++++++++++++++++++++-----------------------
drivers/pci/dwc/Makefile | 4 +---
2 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 113e09440f85..3954353e3e2e 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -15,39 +15,38 @@ config PCIE_DW_EP
select PCIE_DW
config PCI_DRA7XX
- bool "TI DRA7xx PCIe controller"
- depends on SOC_DRA7XX || COMPILE_TEST
- depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT
- depends on OF && HAS_IOMEM && TI_PIPE3
- help
- Enables support for the PCIe controller in the DRA7xx SoC. There
- are two instances of PCIe controller in DRA7xx. This controller can
- work either as EP or RC. In order to enable host-specific features
- PCI_DRA7XX_HOST must be selected and in order to enable device-
- specific features PCI_DRA7XX_EP must be selected. This uses
- the DesignWare core.
-
-if PCI_DRA7XX
+ bool
config PCI_DRA7XX_HOST
- bool "PCI DRA7xx Host Mode"
- depends on PCI
- depends on PCI_MSI_IRQ_DOMAIN
+ bool "TI DRA7xx PCIe controller Host Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
+ depends on PCI && PCI_MSI_IRQ_DOMAIN
+ depends on OF && HAS_IOMEM && TI_PIPE3
select PCIE_DW_HOST
+ select PCI_DRA7XX
default y
help
- Enables support for the PCIe controller in the DRA7xx SoC to work in
- host mode.
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ host mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
config PCI_DRA7XX_EP
- bool "PCI DRA7xx Endpoint Mode"
+ bool "TI DRA7xx PCIe controller Endpoint Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
depends on PCI_ENDPOINT
+ depends on OF && HAS_IOMEM && TI_PIPE3
select PCIE_DW_EP
+ select PCI_DRA7XX
help
- Enables support for the PCIe controller in the DRA7xx SoC to work in
- endpoint mode.
-
-endif
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ endpoint mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index 41ba499c96ee..a9d8a6fb48e3 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -3,9 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
-ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),)
- obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
-endif
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
--
2.14.2
next prev parent reply other threads:[~2017-12-19 23:29 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 23:29 [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 01/18] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-12-20 19:10 ` Joao Pinto
2017-12-21 16:43 ` Jingoo Han
2020-09-23 23:18 ` Rob Herring
2017-12-19 23:29 ` [PATCH v6 02/18] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-12-20 19:17 ` Joao Pinto
2017-12-21 16:44 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 03/18] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-12-20 19:18 ` Joao Pinto
2017-12-21 16:45 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 04/18] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-12-20 19:30 ` Joao Pinto
2017-12-21 16:46 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 05/18] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 06/18] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-12-20 19:32 ` Joao Pinto
2017-12-21 16:47 ` Jingoo Han
2017-12-26 12:50 ` Kishon Vijay Abraham I
2017-12-27 22:29 ` Niklas Cassel
2017-12-28 8:06 ` Kishon Vijay Abraham I
2017-12-28 14:39 ` Kishon Vijay Abraham I
2017-12-28 22:43 ` Niklas Cassel
2017-12-19 23:29 ` Niklas Cassel [this message]
2017-12-19 23:29 ` [PATCH v6 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 09/18] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 10/18] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 11/18] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 14/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 16/18] PCI: dwc: artpec6: Deassert the core before waiting for PHY Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 18/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-20 17:34 ` [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Lorenzo Pieralisi
2017-12-20 19:47 ` Joao Pinto
2017-12-20 23:22 ` Niklas Cassel
2017-12-21 9:23 ` Joao Pinto
2017-12-21 10:02 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219232940.659-8-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).