[PATCH AUTOSEL 5.3 07/49] PCI: tegra: Fix OF node reference leak

[PATCH AUTOSEL 5.3 07/49] PCI: tegra: Fix OF node reference leak

[Sasha Levin]

From: Nishka Dasgupta <nishkadg.linux@gmail.com>

[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ]

Each iteration of for_each_child_of_node() executes of_node_put() on the
previous node, but in some return paths in the middle of the loop
of_node_put() is missing thus causing a reference leak.

Hence stash these mid-loop return values in a variable 'err' and add a
new label err_node_put which executes of_node_put() on the previous node
and returns 'err' on failure.

Change mid-loop return statements to point to jump to this label to
fix the reference leak.

Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-tegra.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 9a917b2456f6c..673a1725ef382 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -2237,14 +2237,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		err = of_pci_get_devfn(port);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		index = PCI_SLOT(err);
 
 		if (index < 1 || index > soc->num_ports) {
 			dev_err(dev, "invalid port number: %d\n", index);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		index--;
@@ -2253,12 +2254,13 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		if (err < 0) {
 			dev_err(dev, "failed to parse # of lanes: %d\n",
 				err);
-			return err;
+			goto err_node_put;
 		}
 
 		if (value > 16) {
 			dev_err(dev, "invalid # of lanes: %u\n", value);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		lanes |= value << (index << 3);
@@ -2272,13 +2274,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		lane += value;
 
 		rp = devm_kzalloc(dev, sizeof(*rp), GFP_KERNEL);
-		if (!rp)
-			return -ENOMEM;
+		if (!rp) {
+			err = -ENOMEM;
+			goto err_node_put;
+		}
 
 		err = of_address_to_resource(port, 0, &rp->regs);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		INIT_LIST_HEAD(&rp->list);
@@ -2330,6 +2334,10 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		return err;
 
 	return 0;
+
+err_node_put:
+	of_node_put(port);
+	return err;
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.3 11/49] PCI: pci-hyperv: Fix build errors on non-SYSFS config

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit f58ba5e3f6863ea4486952698898848a6db726c2 ]

Fix build errors when building almost-allmodconfig but with SYSFS
not set (not enabled). Fixes these build errors:

ERROR: "pci_destroy_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!
ERROR: "pci_create_slot" [drivers/pci/controller/pci-hyperv.ko] undefined!

drivers/pci/slot.o is only built when SYSFS is enabled, so
pci-hyperv.o has an implicit dependency on SYSFS.
Make that explicit.

Also, depending on X86 && X86_64 is not needed, so just change that
to depend on X86_64.

Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org
Cc: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 2ab92409210af..297bf928d6522 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -181,7 +181,7 @@ config PCI_LABEL
 
 config PCI_HYPERV
         tristate "Hyper-V PCI Frontend"
-        depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+        depends on X86_64 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS
         help
           The PCI device frontend driver allows the kernel to import arbitrary
           PCI devices from a PCI backend to support PCI driver domains.
-- 
2.20.1

[PATCH AUTOSEL 5.3 12/49] PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver

[Sasha Levin]

From: Xiaowei Bao <xiaowei.bao@nxp.com>

[ Upstream commit fd5d16531a39322c3d7433d9f8a36203c9aaeddc ]

The layerscape PCIe controller have 4 BARs.

 BAR0 and BAR1 are 32bit, BAR2 and BAR4 are 64bit and that's a
fixed hardware configuration.

Set the bar_fixed_64bit variable accordingly.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-layerscape-ep.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index be61d96cc95ed..ca9aa4501e7e9 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -44,6 +44,7 @@ static const struct pci_epc_features ls_pcie_epc_features = {
 	.linkup_notifier = false,
 	.msi_capable = true,
 	.msix_capable = false,
+	.bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4),
 };
 
 static const struct pci_epc_features*
-- 
2.20.1

[PATCH AUTOSEL 5.3 17/49] PCI: mobiveil: Fix the CPU base address setup in inbound window

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit df901c85cc28b538c62f6bc20b16a8bd05fcb756 ]

Current code erroneously sets-up the CPU base address through the
parameter 'pci_addr', which is passed to initialize the CPU (AXI) base
address of the inbound window where the controller maps the PCI address
space into CPU physical address space; furthermore, it also truncates it
by programming only the lower 32-bit value into the inbound CPU address
register.

Fix both issues by introducing a new parameter 'u64 cpu_addr' to
initialize both lower 32-bit and upper 32-bit of the CPU physical
base address mapping PCI inbound transactions into CPU (AXI) ones.

Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mobiveil.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 672e633601c78..a45a6447b01d9 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -88,6 +88,7 @@
 #define  AMAP_CTRL_TYPE_MASK		3
 
 #define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
 #define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
 #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
 #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
@@ -462,7 +463,7 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
 }
 
 static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
-			       u64 pci_addr, u32 type, u64 size)
+			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
 {
 	u32 value;
 	u64 size64 = ~(size - 1);
@@ -482,7 +483,10 @@ static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
 	csr_writel(pcie, upper_32_bits(size64),
 		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
 
-	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, lower_32_bits(cpu_addr),
+		   PAB_PEX_AMAP_AXI_WIN(win_num));
+	csr_writel(pcie, upper_32_bits(cpu_addr),
+		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
 
 	csr_writel(pcie, lower_32_bits(pci_addr),
 		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
@@ -624,7 +628,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
 
 	/* memory inbound translation window */
-	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
 
 	/* Get the I/O and memory ranges from DT */
 	resource_list_for_each_entry(win, &pcie->resources) {
-- 
2.20.1

[PATCH AUTOSEL 5.3 25/49] PCI: Add pci_info_ratelimited() to ratelimit PCI separately

[Sasha Levin]

From: Krzysztof Wilczynski <kw@linux.com>

[ Upstream commit 7f1c62c443a453deb6eb3515e3c05650ffe0dcf0 ]

Do not use printk_ratelimit() in drivers/pci/pci.c as it shares the rate
limiting state with all other callers to the printk_ratelimit().

Add pci_info_ratelimited() (similar to pci_notice_ratelimited() added in
the commit a88a7b3eb076 ("vfio: Use dev_printk() when possible")) and use
it instead of printk_ratelimit() + pci_info().

Link: https://lore.kernel.org/r/20190825224616.8021-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c   | 4 ++--
 include/linux/pci.h | 3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1b27b5af3d552..1f17da3dfeac5 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -890,8 +890,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 	dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
-	if (dev->current_state != state && printk_ratelimit())
-		pci_info(dev, "Refused to change power state, currently in D%d\n",
+	if (dev->current_state != state)
+		pci_info_ratelimited(dev, "Refused to change power state, currently in D%d\n",
 			 dev->current_state);
 
 	/*
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 82e4cd1b7ac3c..ac8a6c4e17923 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2435,4 +2435,7 @@ void pci_uevent_ers(struct pci_dev *pdev, enum  pci_ers_result err_type);
 #define pci_notice_ratelimited(pdev, fmt, arg...) \
 	dev_notice_ratelimited(&(pdev)->dev, fmt, ##arg)
 
+#define pci_info_ratelimited(pdev, fmt, arg...) \
+	dev_info_ratelimited(&(pdev)->dev, fmt, ##arg)
+
 #endif /* LINUX_PCI_H */
-- 
2.20.1

[PATCH AUTOSEL 5.3 27/49] PCI: rockchip: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 0e3ff0ac5f71bdb6be2a698de0ed0c7e6e738269 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-rockchip-host.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index 8d20f1793a618..ef8e677ce9d11 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -608,29 +608,29 @@ static int rockchip_pcie_parse_host_dt(struct rockchip_pcie *rockchip)
 
 	rockchip->vpcie12v = devm_regulator_get_optional(dev, "vpcie12v");
 	if (IS_ERR(rockchip->vpcie12v)) {
-		if (PTR_ERR(rockchip->vpcie12v) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie12v) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie12v);
 		dev_info(dev, "no vpcie12v regulator found\n");
 	}
 
 	rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
 	if (IS_ERR(rockchip->vpcie3v3)) {
-		if (PTR_ERR(rockchip->vpcie3v3) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie3v3) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie3v3);
 		dev_info(dev, "no vpcie3v3 regulator found\n");
 	}
 
 	rockchip->vpcie1v8 = devm_regulator_get_optional(dev, "vpcie1v8");
 	if (IS_ERR(rockchip->vpcie1v8)) {
-		if (PTR_ERR(rockchip->vpcie1v8) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie1v8) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie1v8);
 		dev_info(dev, "no vpcie1v8 regulator found\n");
 	}
 
 	rockchip->vpcie0v9 = devm_regulator_get_optional(dev, "vpcie0v9");
 	if (IS_ERR(rockchip->vpcie0v9)) {
-		if (PTR_ERR(rockchip->vpcie0v9) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(rockchip->vpcie0v9) != -ENODEV)
+			return PTR_ERR(rockchip->vpcie0v9);
 		dev_info(dev, "no vpcie0v9 regulator found\n");
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 28/49] PCI: histb: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 8f9e1641ba445437095411d9fda2324121110d5d ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-histb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index 954bc2b74bbcd..811b5c6d62eae 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -340,8 +340,8 @@ static int histb_pcie_probe(struct platform_device *pdev)
 
 	hipcie->vpcie = devm_regulator_get_optional(dev, "vpcie");
 	if (IS_ERR(hipcie->vpcie)) {
-		if (PTR_ERR(hipcie->vpcie) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(hipcie->vpcie) != -ENODEV)
+			return PTR_ERR(hipcie->vpcie);
 		hipcie->vpcie = NULL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 29/49] PCI: imx6: Propagate errors for optional regulators

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 2170a09fb4b0f66e06e5bcdcbc98c9ccbf353650 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: kernel@pengutronix.de
Cc: linux-imx@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 9b5cb5b703890..aabf22eaa6b91 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1173,8 +1173,8 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 
 	imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
 	if (IS_ERR(imx6_pcie->vpcie)) {
-		if (PTR_ERR(imx6_pcie->vpcie) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+		if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
+			return PTR_ERR(imx6_pcie->vpcie);
 		imx6_pcie->vpcie = NULL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.3 30/49] PCI: exynos: Propagate errors for optional PHYs

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit ddd6960087d4b45759434146d681a94bbb1c54ad ]

devm_of_phy_get() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate devres structures. Propagating only -EPROBE_DEFER
is problematic because it results in these legitimately fatal errors
being treated as "PHY not specified in DT".

What we really want is to ignore the optional PHYs only if they have not
been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so
that's the special case that we need to handle. So we propagate all
errors, except -ENODEV, so that real failures will still cause the
driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-exynos.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index cee5f2f590e2d..14a6ba4067fbe 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -465,7 +465,7 @@ static int __init exynos_pcie_probe(struct platform_device *pdev)
 
 	ep->phy = devm_of_phy_get(dev, np, NULL);
 	if (IS_ERR(ep->phy)) {
-		if (PTR_ERR(ep->phy) == -EPROBE_DEFER)
+		if (PTR_ERR(ep->phy) != -ENODEV)
 			return PTR_ERR(ep->phy);
 
 		ep->phy = NULL;
-- 
2.20.1

[PATCH AUTOSEL 5.3 32/49] PCI: Use static const struct, not const static struct

[Sasha Levin]

From: Krzysztof Wilczynski <kw@linux.com>

[ Upstream commit 8050f3f6645ae0f7e4c1304593f6f7eb2ee7d85c ]

Move the static keyword to the front of declarations of pci_regs_behavior[]
and pcie_cap_regs_behavior[], which resolves compiler warnings when
building with "W=1":

  drivers/pci/pci-bridge-emul.c:41:1: warning: ‘static’ is not at beginning of
  declaration [-Wold-style-declaration]
   const static struct pci_bridge_reg_behavior pci_regs_behavior[] = {
   ^
  drivers/pci/pci-bridge-emul.c:176:1: warning: ‘static’ is not at beginning of
  declaration [-Wold-style-declaration]
   const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
   ^

Link: https://lore.kernel.org/r/20190826151436.4672-1-kw@linux.com
Link: https://lore.kernel.org/r/20190828131733.5817-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-bridge-emul.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index 06083b86d4f45..5fd90105510d9 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -38,7 +38,7 @@ struct pci_bridge_reg_behavior {
 	u32 rsvd;
 };
 
-const static struct pci_bridge_reg_behavior pci_regs_behavior[] = {
+static const struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 	[PCI_VENDOR_ID / 4] = { .ro = ~0 },
 	[PCI_COMMAND / 4] = {
 		.rw = (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
@@ -173,7 +173,7 @@ const static struct pci_bridge_reg_behavior pci_regs_behavior[] = {
 	},
 };
 
-const static struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
+static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
 	[PCI_CAP_LIST_ID / 4] = {
 		/*
 		 * Capability ID, Next Capability Pointer and
-- 
2.20.1