From: Kishon Vijay Abraham I <kishon@ti.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>
Cc: Roger Quadros <rogerq@ti.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 5/8] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
Date: Mon, 2 Nov 2020 15:41:51 +0530 [thread overview]
Message-ID: <20201102101154.13598-6-kishon@ti.com> (raw)
In-Reply-To: <20201102101154.13598-1-kishon@ti.com>
Add PCIe device tree node (both RC and EP) for the single PCIe
instance present in j7200.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 58 +++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 7668404c178b..9892704d4b67 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,6 +25,14 @@
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
+ pcie1_ctrl: pcie-ctrl@4074 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00004074 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x4074 0x4074 0x4>;
+ };
+
serdes_ln_ctrl: serdes-ln-ctrl@4080 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
@@ -478,6 +486,56 @@
};
};
+ pcie1_rc: pcie@2910000 {
+ compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 6>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ cdns,max-outbound-regions = <32>;
+ cdns,no-bar-match-nbits = <64>;
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb00f>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+
+ pcie1_ep: pcie-ep@2910000 {
+ compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 240 6>;
+ clock-names = "fck";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <6>;
+ dma-coherent;
+ };
+
usbss0: cdns-usb@4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x4104000 0x00 0x100>;
--
2.17.1
next prev parent reply other threads:[~2020-11-02 10:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-02 10:11 [PATCH 0/8] J7200: Add PCIe DT nodes to Enable PCIe Kishon Vijay Abraham I
2020-11-02 10:11 ` [PATCH 1/8] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "pcie-ctrl" Kishon Vijay Abraham I
2020-11-05 16:54 ` Rob Herring
2020-11-09 14:17 ` Kishon Vijay Abraham I
2020-11-02 10:11 ` [PATCH 2/8] dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC Kishon Vijay Abraham I
2020-11-05 16:56 ` Rob Herring
2020-11-02 10:11 ` [PATCH 3/8] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-11-05 16:56 ` Rob Herring
2020-11-02 10:11 ` [PATCH 4/8] arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES Kishon Vijay Abraham I
2020-11-02 10:11 ` Kishon Vijay Abraham I [this message]
2020-11-02 10:11 ` [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0 Kishon Vijay Abraham I
2020-11-02 10:11 ` [PATCH 7/8] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe Kishon Vijay Abraham I
2020-11-02 10:11 ` [PATCH 8/8] arm64: dts: ti: k3-j721e-main: Fix PCIe maximum outbound regions Kishon Vijay Abraham I
2020-11-02 16:41 ` Nishanth Menon
2020-11-03 2:18 ` Kishon Vijay Abraham I
2020-11-05 16:53 ` Rob Herring
2020-11-06 15:10 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102101154.13598-6-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).